Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2019.04-armbian (Jul 16 2019 - 10:53:57 +0200)
- DRAM: 256 MiB
- Trying to boot from MMC1
- U-Boot 2019.04-armbian (Jul 16 2019 - 10:53:57 +0200) Allwinner Technology
- CPU: Allwinner H3 (SUN8I 1680)
- Model: Xunlong Orange Pi Zero
- DRAM: 256 MiB
- MMC: mmc@1c0f000: 0, mmc@1c10000: 1
- Loading Environment from EXT4... ** File not found /boot/boot.env **
- ** Unable to read "/boot/boot.env" from mmc0:1 **
- In: serial
- Out: serial
- Err: serial
- Net: phy interface0
- eth0: ethernet@1c30000
- starting USB...
- USB0: USB EHCI 1.00
- USB1: USB OHCI 1.0
- USB2: USB EHCI 1.00
- USB3: USB OHCI 1.0
- USB4: USB EHCI 1.00
- USB5: USB OHCI 1.0
- scanning bus 0 for devices... 1 USB Device(s) found
- scanning bus 1 for devices... 1 USB Device(s) found
- scanning bus 2 for devices... 1 USB Device(s) found
- scanning bus 3 for devices... 1 USB Device(s) found
- scanning bus 4 for devices... 1 USB Device(s) found
- scanning bus 5 for devices... 1 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- Autoboot in 1 seconds, press <Space> to stop
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 3798 bytes read in 2 ms (1.8 MiB/s)
- ## Executing script at 43100000
- U-boot loaded from SD
- Boot script loaded from mmc
- 230 bytes read in 2 ms (112.3 KiB/s)
- 6746481 bytes read in 514 ms (12.5 MiB/s)
- 7494376 bytes read in 570 ms (12.5 MiB/s)
- Found mainline kernel configuration
- 29807 bytes read in 8 ms (3.6 MiB/s)
- 504 bytes read in 6 ms (82 KiB/s)
- Applying kernel provided DT overlay sun8i-h3-usbhost2.dtbo
- 504 bytes read in 4 ms (123 KiB/s)
- Applying kernel provided DT overlay sun8i-h3-usbhost3.dtbo
- 4155 bytes read in 5 ms (811.5 KiB/s)
- Applying kernel provided DT fixup script (sun8i-h3-fixup.scr)
- ## Executing script at 44000000
- ## Loading init Ramdisk from Legacy Image at 43300000 ...
- Image Name: uInitrd
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 6746417 Bytes = 6.4 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 43000000
- Booting using the fdt blob at 0x43000000
- EHCI failed to shut down host controller.
- Loading Ramdisk to 49990000, end 49fff131 ... OK
- Loading Device Tree to 49920000, end 4998ffff ... OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- Loading, please wait...
- Starting version 241
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
- done.
- Begin: Will now check root file system ... fsck from util-linux 2.33.1
- [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
- /dev/mmcblk0p1: recovering journal
- /dev/mmcblk0p1: clean, 37252/934864 files, 296336/3867484 blocks
- done.
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- Welcome to Debian GNU/Linux 10 (buster)!
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Started Forward Password R…uests to Wall Directory Watch.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Listening on udev Control Socket.
- [ OK ] Listening on fsck to fsckd communication Socket.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Started Dispatch Password …ts to Console Directory Watch.
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Listening on initctl Compatibility Named Pipe.
- [ OK ] Set up automount Arbitrary…s File System Automount Point.
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Listening on Journal Audit Socket.
- [ OK ] Reached target Swap.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Reached target Remote File Systems.
- [ OK ] Reached target Paths.
- [ OK ] Reached target Slices.
- [ OK ] Listening on Syslog Socket.
- [ OK ] Listening on Journal Socket.
- Mounting POSIX Message Queue File System...
- Starting Set the console keyboard layout...
- Starting Nameserver information manager...
- Mounting Kernel Debug File System...
- Starting Load Kernel Modules...
- Starting Restore / save the current clock...
- Starting udev Coldplug all Devices...
- Starting Create list of re…odes for the current kernel...
- Starting Remount Root and Kernel File Systems...
- [ OK ] Listening on Journal Socket (/dev/log).
- Starting Journal Service...
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Started Restore / save the current clock.
- [ OK ] Started Create list of req… nodes for the current kernel.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started Nameserver information manager.
- Starting Create System Users...
- Starting Load/Save Random Seed...
- Mounting Kernel Configuration File System...
- Starting Apply Kernel Variables...
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Create System Users.
- Starting Create Static Device Nodes in /dev...
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started Create Static Device Nodes in /dev.
- Starting udev Kernel Device Manager...
- [ OK ] Reached target Local File Systems (Pre).
- Mounting /tmp...
- [ OK ] Started Journal Service.
- [ OK ] Mounted /tmp.
- [ OK ] Reached target Local File Systems.
- Starting Set console font and keymap...
- Starting Armbian ZRAM config...
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Started Set console font and keymap.
- [ OK ] Found device /dev/ttyGS0.
- [ OK ] Started Flush Journal to Persistent Storage.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- [ OK ] Started udev Coldplug all Devices.
- U-Boot SPL 2019.04-armbian (Jul 16 2019 - 10:53:57 +0200)
- DRAM: 256 MiB
- Trying to boot from MMC1
- U-Boot 2019.04-armbian (Jul 16 2019 - 10:53:57 +0200) Allwinner Technology
- CPU: Allwinner H3 (SUN8I 1680)
- Model: Xunlong Orange Pi Zero
- DRAM: 256 MiB
- MMC: mmc@1c0f000: 0, mmc@1c10000: 1
- Loading Environment from EXT4... ** File not found /boot/boot.env **
- ** Unable to read "/boot/boot.env" from mmc0:1 **
- In: serial
- Out: serial
- Err: serial
- Net: phy interface0
- eth0: ethernet@1c30000
- starting USB...
- USB0: USB EHCI 1.00
- USB1: USB OHCI 1.0
- USB2: USB EHCI 1.00
- USB3: USB OHCI 1.0
- USB4: USB EHCI 1.00
- USB5: USB OHCI 1.0
- scanning bus 0 for devices... 1 USB Device(s) found
- scanning bus 1 for devices... 1 USB Device(s) found
- scanning bus 2 for devices... 1 USB Device(s) found
- scanning bus 3 for devices... 1 USB Device(s) found
- scanning bus 4 for devices... 1 USB Device(s) found
- scanning bus 5 for devices... 1 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- Autoboot in 1 seconds, press <Space> to stop
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 3798 bytes read in 2 ms (1.8 MiB/s)
- ## Executing script at 43100000
- U-boot loaded from SD
- Boot script loaded from mmc
- 230 bytes read in 2 ms (112.3 KiB/s)
- 6746481 bytes read in 517 ms (12.4 MiB/s)
- 7494376 bytes read in 574 ms (12.5 MiB/s)
- Found mainline kernel configuration
- 29807 bytes read in 9 ms (3.2 MiB/s)
- 504 bytes read in 6 ms (82 KiB/s)
- Applying kernel provided DT overlay sun8i-h3-usbhost2.dtbo
- 504 bytes read in 5 ms (97.7 KiB/s)
- Applying kernel provided DT overlay sun8i-h3-usbhost3.dtbo
- 4155 bytes read in 5 ms (811.5 KiB/s)
- Applying kernel provided DT fixup script (sun8i-h3-fixup.scr)
- ## Executing script at 44000000
- ## Loading init Ramdisk from Legacy Image at 43300000 ...
- Image Name: uInitrd
- Image Type: ARM Linux RAMDisk Image (gzip compressed)
- Data Size: 6746417 Bytes = 6.4 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 43000000
- Booting using the fdt blob at 0x43000000
- EHCI failed to shut down host controller.
- Loading Ramdisk to 49990000, end 49fff131 ... OK
- Loading Device Tree to 49920000, end 4998ffff ... OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- Loading, please wait...
- Starting version 241
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
- done.
- Begin: Will now check root file system ... fsck from util-linux 2.33.1
- [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
- /dev/mmcblk0p1: recovering journal
- /dev/mmcblk0p1: clean, 37252/934864 files, 296336/3867484 blocks
- done.
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- Welcome to Debian GNU/Linux 10 (buster)!
- [ OK ] Listening on Journal Audit Socket.
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Listening on Journal Socket.
- Starting Create list of re…odes for the current kernel...
- Starting Load Kernel Modules...
- [ OK ] Started Dispatch Password …ts to Console Directory Watch.
- Mounting Kernel Debug File System...
- [ OK ] Listening on initctl Compatibility Named Pipe.
- [ OK ] Listening on udev Control Socket.
- Starting Nameserver information manager...
- [ OK ] Created slice User and Session Slice.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- Mounting POSIX Message Queue File System...
- Starting Restore / save the current clock...
- [ OK ] Reached target Swap.
- [ OK ] Listening on fsck to fsckd communication Socket.
- Starting Remount Root and Kernel File Systems...
- [ OK ] Listening on Journal Socket (/dev/log).
- Starting Set the console keyboard layout...
- [ OK ] Reached target Remote File Systems.
- Starting udev Coldplug all Devices...
- [ OK ] Started Forward Password R…uests to Wall Directory Watch.
- [ OK ] Reached target Paths.
- [ OK ] Reached target Slices.
- [ OK ] Listening on Syslog Socket.
- Starting Journal Service...
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Set up automount Arbitrary…s File System Automount Point.
- [ OK ] Started Create list of req… nodes for the current kernel.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Started Restore / save the current clock.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Started Nameserver information manager.
- Starting Create System Users...
- Starting Load/Save Random Seed...
- Starting Apply Kernel Variables...
- Mounting Kernel Configuration File System...
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Create System Users.
- Starting Create Static Device Nodes in /dev...
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Reached target Local File Systems (Pre).
- Mounting /tmp...
- Starting udev Kernel Device Manager...
- [ OK ] Started Journal Service.
- [ OK ] Mounted /tmp.
- [ OK ] Reached target Local File Systems.
- Starting Armbian ZRAM config...
- Starting Set console font and keymap...
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started Set console font and keymap.
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Found device /dev/ttyGS0.
- [ OK ] Started Flush Journal to Persistent Storage.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- [ OK ] Started Entropy daemon using the HAVEGE algorithm.
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Started udev Coldplug all Devices.
- U-Boot SPL 2019.04-armbian (Jul 16 2019 - 10:53:57 +0200)
- DRAM: 256 MiB
- Trying to boot from MMC1
- U-Boot 2019.04-armbian (Jul 16 2019 - 10:53:57 +0200) Allwinner Technology
- CPU: Allwinner H3 (SUN8I 1680)
- Model: Xunlong Orange Pi Zero
- DRAM: 256 MiB
- MMC: mmc@1c0f000: 0, mmc@1c10000: 1
- Loading Environment from EXT4... ** File not found /boot/boot.env **
- ...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement