Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- DDR Version V1.03 20180118
- set vdd core 1.15v
- In
- 600MHz
- DDR3
- Bus Width=16 Col=10 Bank=8 Row=13 CS=1 Die Bus-Width=16 Size=128MB
- mach:2
- OUT
- 1 BUILD: Apr 18 2018 19:33:57, version: 1.25
- mmc bus width: 8 bits
- cardInfo.type = 80
- SdmmcInit=2 0
- BootCapSize=1000
- UserCapSize=3616MB
- FwPartOffset=0 , 1000
- boot_media = 0x2
- emmc vendor_storage_init
- OK! 193894
- loader flag: 0x0
- start_linux=====194526
- multi-entries loader - fw_status: 0x0, kernel_addr 400, 195 ms
- load data done @2054 ms
- run kernel@0x62000000 =====2122 ms
- <hit enter to activate fiq debugger>
- [ 0.000000] Booting Linux on physical CPU 0xf00
- [ 0.000000] Linux version 3.10.104 (jonatan@macnica010) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #102 SMP PREEMPT Thu
- Jun 28 21:31:51 -03 2018
- [ 0.000000] cpu_do_switch_mm is cpu_v7_switch_mm
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: Rockchip RV1108, model: Rockchip RV1108 MINIEVB V10
- [ 0.000000] rockchip_ion_reserve
- [ 0.000000] ion heap(carveout): base(62000000) size(100000) align(0)
- [ 0.000000] ion heap(cma): base(0) size(4400000) align(0)
- [ 0.000000] ion heap(vmalloc): base(0) size(0) align(0)
- [ 0.000000] ion_reserve: carveout reserved base 62000000 size 1048576
- [ 0.000000] cma: CMA: reserved 68 MiB at 63c00000
- [ 0.000000] ion_reserve: cma reserved base 63c00000 size 71303168
- [ 0.000000] cma: CMA: reserved 4 MiB at 63800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] PERCPU: Embedded 9 pages/cpu @c0bf3000 s13184 r8192 d15488 u36864
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- [ 0.000000] Kernel command line: user_debug=31 rockchip_jtag noinitrd root=/dev/mmcblk0p4 rootfstype=squashfs stmmaceth=phyaddr:2
- [ 0.000000] rockchip jtag enabled
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Memory: 128MB = 128MB total
- [ 0.000000] Memory: 43708k/43708k available, 87364k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc08796d0 (8646 kB)
- [ 0.000000] .init : 0xc087a000 - 0xc08f8380 ( 505 kB)
- [ 0.000000] .data : 0xc08fa000 - 0xc09eec18 ( 980 kB)
- [ 0.000000] .bss : 0xc09eec18 - 0xc0ab456c ( 791 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] GIC CPU mask not found - kernel will fail to boot.
- [ 0.000000] GIC CPU mask not found - kernel will fail to boot.
- [ 0.000000] rk_clk_tree_init start!
- [ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
- [ 0.000000] rkclk_init_clks: cnt_parent = 7
- [ 0.000000] rkclk_init_clks: cnt_rate = 28
- [ 0.000000] rkclk: can't get a available nume and deno
- [ 0.000000] rkclk: clk_frac_div name=uart2_frac can't get rate=464062
- [ 0.000000] rkclk: can't get a available nume and deno
- [ 0.000000] rkclk: clk_frac_div name=uart1_frac can't get rate=464062
- [ 0.000000] rkclk: can't get a available nume and deno
- [ 0.000000] rkclk: clk_frac_div name=uart0_frac can't get rate=464062
- [ 0.000000] rkclk: can't get a available nume and deno
- [ 0.000000] rkclk: clk_frac_div name=i2s2_frac can't get rate=464062
- [ 0.000000] rkclk: can't get a available nume and deno
- [ 0.000000] rkclk: clk_frac_div name=i2s1_frac can't get rate=464062
- [ 0.000000] rkclk: can't get a available nume and deno
- [ 0.000000] rkclk: clk_frac_div name=i2s0_frac can't get rate=464062
- [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
- [ 0.000000] process version: 7
- [ 0.000000] channel:0, lkg:8
- [ 0.000000] target-temp:95
- [ 0.000000] channel:0, lkg:8
- [ 0.000000] channel:0, lkg:8
- [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
- [ 4.096610] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 4.096642] pid_max: default: 32768 minimum: 301
- [ 4.096906] Mount-cache hash table entries: 512
- [ 4.097926] CPU: Testing write buffer coherency: ok
- [ 4.098344] /cpus/cpu@0 missing clock-frequency property
- [ 4.098451] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
- [ 4.098498] Setting up static identity map for 0xc061f070 - 0xc061f0c8
- [ 4.099679] last_log: 0x63080000 map to 0xc8814000 and copy to 0xc8836000, size 0x20000 early 0x151c (version 3.1)
- [ 4.153647] Brought up 1 CPUs
- [ 4.153679] SMP: Total of 1 processors activated (48.00 BogoMIPS).
- [ 4.153695] CPU: All CPU(s) started in SVC mode.
- [ 4.154699] devtmpfs: initialized
- [ 4.161211] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 4.162806] pinctrl core: initialized pinctrl subsystem
- [ 4.163326] regulator-dummy: no parameters
- [ 4.187872] NET: Registered protocol family 16
- [ 4.189617] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 4.190386] ion_snapshot: 0x63158000 map to 0xc8857000 and copy to 0xc0a8cf34 (version 0.1)
- [ 4.190588] Registered FIQ tty driver
- [ 4.192571] console [ttyFIQ0] enabled
- [ 4.192929] Registered fiq debugger ttyFIQ0
- [ 4.197563] syscon 10300000.syscon: regmap [mem 0x10300000-0x10300fff] registered
- [ 4.197956] syscon 20060000.syscon: regmap [mem 0x20060000-0x20060fff] registered
- [ 4.198313] syscon 202a0000.syscon: regmap [mem 0x202a0000-0x202a0fff] registered
- [ 4.199569] syscon 20200000.syscon: regmap [mem 0x20200000-0x20200fff] registered
- [ 4.229498] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 4.229536] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 4.309848] bio: create slab <bio-0> at 0
- [ 4.311173] Rockchip hdmi driver version 2.0
- [ 4.311384] mpp rkvenc_srv.9: mpp_probe enter
- [ 4.311455] mpp rkvenc_srv.9: init success
- [ 4.312282] usbcore: registered new interface driver usbfs
- [ 4.312392] usbcore: registered new interface driver hub
- [ 4.314634] usbcore: registered new device driver usb
- [ 4.316050] rv1108-dwc-control-usb dwc-control-usb.10: no hclk_usb_peri clk specified
- [ 4.319151] rk3x-i2c 20000000.i2c: Initialized RK3xxx I2C bus at c886e000
- [ 4.319881] rk3x-i2c 10240000.i2c: Initialized RK3xxx I2C bus at c8870000
- [ 4.320330] media: Linux media interface: v0.10
- [ 4.320453] Linux video capture interface: v2.00
- [ 4.320537] pps_core: LinuxPPS API ver. 1 registered
- [ 4.320559] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 4.320610] PTP clock support registered
- [ 4.320674] RK29 Watchdog Timer, (c) 2011 Rockchip Electronics
- [ 4.326009] ion_carveout_heap_create: 100000@62000000
- [ 4.327794] Rockchip ion module is successfully loaded (v1.1)
- [ 4.328079] Advanced Linux Sound Architecture Driver Initialized.
- [ 4.329351] cfg80211: Calling CRDA to update world regulatory domain
- [ 4.333388] rk8xx_i2c_probe,line=812
- [ 4.413053] rk_battery_charger_detect_cb , battery_charger_detect 1
- [ 4.558097] pmic is rk805, chip version is 8050
- [ 4.782888] pmic on/off source: on=0x40, off=0x0
- [ 6.713445] rk8xx_i2c_probe: rk8xx_pmic_sleep=0
- [ 6.882875] rk816_regulator_probe: compatible rk805
- [ 7.822231] vdd_arm: 712 <--> 1450 mV at 1150 mV
- [ 9.217976] vcc_22: 2200 mV
- [ 10.275925] vcc_ddr: 1200 mV
- [ 11.674813] vcc_33: 3300 mV
- [ 12.713775] vdd_10: 1000 mV
- [ 13.752598] vcc_18: 1800 mV
- [ 14.987307] vdd10_pmu: 1000 mV
- [ 15.101035] rk8xx_i2c_probe success
- [ 15.101456] i2c-core: driver [rk816] using legacy suspend method
- [ 15.101494] i2c-core: driver [rk816] using legacy resume method
- [ 15.102676] rk816_rtc_probe,line=463
- [ 19.240040] rk8xx-rtc rk8xx-rtc: rtc core: registered rk816 as rtc0
- [ 19.436325] rk805: rtc ok
- [ 19.436927] rockchip-i2s 10120000.i2s1: i2s1 has no mclk
- [ 19.438568] Switching to clocksource arch_sys_counter
- [ 19.468381] rga: Module initialized.
- [ 19.469354] rga2 30050000.rga: rga ion client create success!
- [ 19.470177] rga: Driver loaded succesfully
- [ 19.474222] NET: Registered protocol family 2
- [ 19.475825] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
- [ 19.476514] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
- [ 19.476572] TCP: Hash tables configured (established 1024 bind 1024)
- [ 19.477774] TCP: reno registered
- [ 19.477821] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 19.477871] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 19.478298] NET: Registered protocol family 1
- [ 19.478504] rk816_gpio_probe: compatible rk805
- [ 19.478779] rk8xx-gpio rk8xx-gpio: driver success
- [ 19.508020] hw perfevents: enabled with ARMv7_Cortex_A7 PMU driver, 5 counters available
- [ 19.509471] rknandbase v1.0 2014-03-31
- [ 19.510105] rknand_driver:ret = 0
- [ 19.520430] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 19.521291] msgmni has been set to 229
- [ 19.523883] io scheduler noop registered
- [ 19.523919] io scheduler deadline registered
- [ 19.523984] io scheduler cfq registered (default)
- [ 19.525098] Module initialized.
- [ 19.529711] dma-pl330 102a0000.pdma: Loaded driver for PL330 DMAC-2364208
- [ 19.529768] dma-pl330 102a0000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
- [ 19.531780] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 19.534090] rk_serial.c v2.0 2017-06-30
- [ 19.540453] loop: module loaded
- [ 19.541525] zram: Created 1 device(s)
- [ 19.543462] dws->regs: c887a000
- [ 19.544497] of_dma_request_slave_channel: dma-names property missing or empty
- [ 19.544558] rockchip-spi 10270000.spi: Failed to get RX DMA channel
- [ 19.544590] spi_master (null): DMA init failed,ret=-1
- [ 19.547651] rockchip_spi_probe:num_cs=1,bus_num=0,irq=69,freq=47520000 ok
- [ 19.547825] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- [ 19.552211] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
- [ 19.554307] tun: Universal TUN/TAP device driver, 1.6
- [ 19.554353] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 19.555774] vmac_init.
- [ 19.557264] stmmac_probe_config_dt: Can not read property: pmu_regulator.
- [ 19.557920] stmmac_probe_config_dt: clock input/output? (input).
- [ 19.558481] stmmac_probe_config_dt: Can not read property: tx_delay.
- [ 19.558511] set tx_delay to 0x30
- [ 19.559359] stmmac_probe_config_dt: Can not read property: rx_delay.
- [ 19.559387] set rx_delay to 0x10
- [ 19.560239] stmmac_probe_config_dt: Can not read property: phy-type.
- [ 19.560442] stmmc_pltfr_init:
- [ 19.560459] stmmc_pltfr_init: ERROR: Get power-gpio failed.
- [ 19.560493] stmmc_pltfr_init: ERROR: Get link-gpio failed.
- [ 19.560515] stmmc_pltfr_init: ERROR: Get led-gpio failed.
- [ 19.560534] stmmc_pltfr_init: init for RMII
- [ 19.560767] gmac_clk_init: warning: cannot get mac_clkin clock
- [ 19.560814] gmac_clk_init: warning: cannot get phy_50m_out clock
- [ 19.560850] gmac_clk_init: warning: cannot get clk_macphy clock
- [ 19.560937] stmmac - user ID: 0x10, Synopsys ID: 0x35
- [ 19.560960] Normal descriptors
- [ 19.560979] Ring mode enabled
- [ 19.560995] DMA HW capability register supported
- [ 19.561018] RX Checksum Offload Engine supported (type 2)
- [ 19.561036] TX Checksum insertion supported
- [ 19.561052] Wake-Up On Lan supported
- [ 19.561151] Enable RX Mitigation via HW Watchdog Timer
- [ 19.562038] Rockchip WiFi SYS interface (V1.00) ...
- [ 19.562128] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 19.562150] ehci-platform: EHCI generic platform driver
- [ 19.562539] ehci-platform 30140000.usb: EHCI Host Controller
- [ 19.562613] ehci-platform 30140000.usb: new USB bus registered, assigned bus number 1
- [ 19.567037] ehci-platform 30140000.usb: irq 47, io mem 0x30140000
- [ 19.586330] ehci-platform 30140000.usb: USB 2.0 started, EHCI 1.00
- [ 19.586516] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 19.586548] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 19.586575] usb usb1: Product: EHCI Host Controller
- [ 19.586596] usb usb1: Manufacturer: Linux 3.10.104 ehci_hcd
- [ 19.586620] usb usb1: SerialNumber: 30140000.usb
- [ 19.587588] hub 1-0:1.0: USB hub found
- [ 19.587652] hub 1-0:1.0: 1 port detected
- [ 19.588173] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 19.588207] ohci-platform: OHCI generic platform driver
- [ 19.588534] ohci-platform 30160000.usb: Generic Platform OHCI controller
- [ 19.588607] ohci-platform 30160000.usb: new USB bus registered, assigned bus number 2
- [ 19.588701] ohci-platform 30160000.usb: irq 48, io mem 0x30160000
- [ 19.649417] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 19.649465] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 19.649494] usb usb2: Product: Generic Platform OHCI controller
- [ 19.649520] usb usb2: Manufacturer: Linux 3.10.104 ohci_hcd
- [ 19.649542] usb usb2: SerialNumber: 30160000.usb
- [ 19.653015] hub 2-0:1.0: USB hub found
- [ 19.653088] hub 2-0:1.0: 1 port detected
- [ 19.653568] usb20_otg: version 3.10a 21-DEC-2012
- [ 19.655341] c8c80040
- [ 19.655379] Core Release: 3.10a
- [ 19.655400] Setting default values for core params
- [ 19.655671] Using Buffer DMA mode
- [ 19.655695] Periodic Transfer Interrupt Enhancement - disabled
- [ 19.655714] Multiprocessor Interrupt Enhancement - disabled
- [ 19.655736] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 19.655754] ^^^^^^^^^^^^^^^^^Device Mode
- [ 19.655787] Dedicated Tx FIFOs mode
- [ 19.655826] pcd_init otg_dev = c2bb8040
- [ 19.656193] usb20_otg 30180000.usb: DWC OTG Controller
- [ 19.656260] usb20_otg 30180000.usb: new USB bus registered, assigned bus number 3
- [ 19.656326] usb20_otg 30180000.usb: irq 50, io mem 0x00000000
- [ 19.656465] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 19.656497] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 19.656520] usb usb3: Product: DWC OTG Controller
- [ 19.656544] usb usb3: Manufacturer: Linux 3.10.104 dwc_otg_hcd
- [ 19.656567] usb usb3: SerialNumber: 30180000.usb
- [ 19.664915] hub 3-0:1.0: USB hub found
- [ 19.665113] hub 3-0:1.0: 1 port detected
- [ 19.665700] usb20_host: version 3.10a 21-DEC-2012
- [ 19.763541] dwc_otg_hcd_suspend, usb device mode
- [ 19.901222] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 20.050517] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
- [ 20.050565] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 20.050591] usb 1-1: Product: USB2.0 Hub
- [ 20.051762] hub 1-1:1.0: USB hub found
- [ 20.052244] hub 1-1:1.0: 4 ports detected
- [ 20.056545] input: rk816_pwrkey as /devices/20000000.i2c/i2c-0/0-0018/rk8xx-pwrkey/input/input0
- [ 20.056897] rk805 register rk8xx_pwrkey driver
- [ 20.057006] sensor_register_slave:bma2xx_acc,id=26
- [ 20.057219] i2c /dev entries driver
- [ 20.058783] usbcore: registered new interface driver uvcvideo
- [ 20.058812] USB Video Class driver (1.1.1)
- [ 22.187276] cpufreq version 1.0, suspend freq 1008 MHz
- [ 22.188187] cpuidle: using governor ladder
- [ 22.188230] cpuidle: using governor menu
- [ 22.189047] Synopsys Designware Multimedia Card Interface Driver
- [ 22.189091] MHSC version = Ver 2.00 2015-06-10
- [ 22.190468] dwmmc_rockchip 30110000.rksdmmc: Version ID is 270a
- [ 22.190617] dwmmc_rockchip 30110000.rksdmmc: failed to get hpclk_mmc
- [ 22.192032] dwmmc_rockchip 30110000.rksdmmc: Using internal DMA controller.
- [ 22.192939] dwmmc_rockchip 30110000.rksdmmc: dw_mci_init_slot: fmin=400000, fmax=50000000 [mmc0]
- [ 22.203787] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
- [ 22.224582] dwmmc_rockchip 30110000.rksdmmc: DW MMC controller at irq 45, 32 bit host data width, 256 deep fifo
- [ 22.224633] dwmmc_rockchip 30110000.rksdmmc: 1 slots initialized
- [ 22.225507] dwmmc_rockchip 30120000.rksdmmc: Version ID is 270a
- [ 22.225642] dwmmc_rockchip 30120000.rksdmmc: failed to get hpclk_mmc
- [ 22.230434] dwmmc_rockchip 30120000.rksdmmc: Using internal DMA controller.
- [ 22.231792] dwmmc_rockchip 30120000.rksdmmc: dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc1]
- [ 22.243139] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]
- [ 22.263218] dwmmc_rockchip 30120000.rksdmmc: DW MMC controller at irq 44, 32 bit host data width, 256 deep fifo
- [ 22.263300] dwmmc_rockchip 30120000.rksdmmc: 1 slots initialized
- [ 22.266564] mmc0: BKOPS_EN bit is not set
- [ 22.268895] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
- [ 22.272669] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
- [ 22.272769] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
- [ 22.272890] [mmc0] tuning regsbase addr 0x1e8.
- [ 22.272890] cmd/data error is normal in tuning, Please Ignore!!!
- [ 22.277844] dwmmc_rockchip 30110000.rksdmmc: Good phase range 0-259 (24 len)
- [ 22.277921] dwmmc_rockchip 30110000.rksdmmc: Best phase range 0-259 (24 len)
- [ 22.277966] dwmmc_rockchip 30110000.rksdmmc: Successfully tuned phase to 135
- [ 22.278579] mmc0: new HS200 MMC card at address 0001
- [ 22.281970] rknandc_base v1.1 2017-01-11
- [ 22.282406] rksfc_base v1.1 2016-01-08
- [ 22.283650] mmcblk0: mmc0:0001 M62704 3.53 GiB
- [ 22.287480] u32 classifier
- [ 22.287536] Actions configured
- [ 22.287835] TCP: cubic registered
- [ 22.287863] Initializing XFRM netlink socket
- [ 22.287928] NET: Registered protocol family 17
- [ 22.288008] NET: Registered protocol family 15
- [ 22.288570] mmcblk0rpmb: mmc0:0001 M62704 partition 3 512 KiB
- [ 22.290108] vendor: 0x000001000 -- 0x000008000 (0 MB)
- [ 22.290153] IDBlock: 0x000008000 -- 0x000078000 (0 MB)
- [ 22.290181] kernel: 0x000080000 -- 0x000660000 (5 MB)
- [ 22.290209] rootfs: 0x000660000 -- 0x000fa0000 (9 MB)
- [ 22.290233] mmcblk0: p1 p2 p3 p4[ 22.297985] l2tp_core: L2TP core driver, V2.0
- [ 22.298043] [WLAN_RFKILL]: Enter rfkill_wlan_init
- [ 22.298340] [BT_RFKILL]: Enter rfkill_rk_init
- [ 22.301076] rv1108_suspend_init: pm_ctrbits = 0x100166
- [ 22.301568] Registering SWP/SWPB emulation handler
- [ 22.303560] flash vendor_init_thread!
- [ 22.304121] ddrfreq: verion 1.3 20170830
- [ 22.304193] ddrfreq: normal 600MHz performance 792MHz low_power 396MHz video_1080p 0MHz video_4k 0MHz video_4k_60fps 0
- MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 600MHz video_4k_10b 0MHz video_4k_10b_60fps 0MHz
- [ 22.304230] ddrfreq: auto-freq=0
- [ 22.304250] ddrfreq: auto-freq-table epmty!
- [ 22.308474] regulator-dummy: disabling
- [ 22.309213] console [netcon0] enabled
- [ 22.309249] netconsole: network logging started
- [ 22.309602] pcd_pullup, is_on 0
- [ 22.309776] file system registered
- [ 22.313716] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 22.313771] android_usb gadget: Number of LUNs=2
- [ 22.313804] lun0: LUN: removable file: (no medium)
- [ 22.313832] lun1: LUN: removable file: (no medium)
- [ 22.314792] android_usb gadget: android_usb ready
- [ 22.315021] sensor_init: Probe name sensors
- [ 22.315085] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
- [ 22.617068] [otg id chg] last id -1 current id 8192
- [ 22.617178] PortPower off
- [ 22.617229] rk_battery_charger_detect_cb , battery_charger_detect 6
- [ 22.717668] Using Buffer DMA mode
- [ 22.717716] Periodic Transfer Interrupt Enhancement - disabled
- [ 22.717739] Multiprocessor Interrupt Enhancement - disabled
- [ 22.717765] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 22.717787] ^^^^^^^^^^^^^^^^^Device Mode
- [ 22.719797] dwc_otg_hcd_resume, usb device mode
- [ 22.795790] vendor storage:20160801 ret = 0
- [ 22.823779] dwc_otg_hcd_suspend, usb device mode
- [ 23.207409] ***************vbus detect*****************
- [ 23.210060] rk_battery_charger_detect_cb , battery_charger_detect 1
- [ 24.650307] rk8xx-rtc rk8xx-rtc: setting system clock to 2016-01-21 08:50:38 UTC (1453366238)
- [ 24.673470] input: rk29-keypad as /devices/1038c000.adc/key0.15/input/input1
- [ 24.676117] usbcore: registered new interface driver snd-usb-audio
- [ 24.676183] ALSA device list:
- [ 24.676207] No soundcards found.
- [ 24.677506] Warning: unable to open an initial console.
- [ 24.678997] Freeing unused kernel memory: 504K (c087a000 - c08f8000)
- Thu Jan 21 08:50:38 UTC 2016
- S: devpts
- mknod: /dev/null: File exists
- [ 24.904880] pm policy 0 -> 1
- mount: mounting none on /sys/kernel/debug failed: Device or resource busy
- /etc/init.d/rcS: line 64: /etc/init.d/blink_leds: not found
- [ 24.933769] phy_power_on: enable = 1
- [ 24.973597] eth_mac_vendor_storage: rk_vendor_read eth mac address failed (-1)
- [ 24.974320] eth_mac_vendor_storage: generate random eth mac address: 7e:fd:64:96:89:73
- [ 25.031161] eth0: device MAC address 7e:fd:64:96:89:73
- [ 25.031878] MDIO READ: PHY: 0 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.031944] MDIO READ: PHY: 0 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.031992] MDIO READ: PHY: 1 REG: 0x00000002 DATA: 0x00000022
- [ 25.032038] MDIO READ: PHY: 1 REG: 0x00000003 DATA: 0x00001430
- [ 25.038585] MDIO READ: PHY: 2 REG: 0x00000002 DATA: 0x00000022
- [ 25.038650] MDIO READ: PHY: 2 REG: 0x00000003 DATA: 0x00001430
- [ 25.043847] MDIO READ: PHY: 3 REG: 0x00000002 DATA: 0x00000022
- [ 25.043915] MDIO READ: PHY: 3 REG: 0x00000003 DATA: 0x00001430
- [ 25.049249] MDIO READ: PHY: 4 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.049318] MDIO READ: PHY: 4 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.049364] MDIO READ: PHY: 5 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.049410] MDIO READ: PHY: 5 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.049454] MDIO READ: PHY: 6 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.049498] MDIO READ: PHY: 6 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.049541] MDIO READ: PHY: 7 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.049583] MDIO READ: PHY: 7 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.049626] MDIO READ: PHY: 8 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.049670] MDIO READ: PHY: 8 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.049713] MDIO READ: PHY: 9 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.049755] MDIO READ: PHY: 9 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.049797] MDIO READ: PHY: 10 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.049841] MDIO READ: PHY: 10 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.049884] MDIO READ: PHY: 11 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.049927] MDIO READ: PHY: 11 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.049970] MDIO READ: PHY: 12 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.050013] MDIO READ: PHY: 12 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.050056] MDIO READ: PHY: 13 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.050099] MDIO READ: PHY: 13 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.050142] MDIO READ: PHY: 14 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.050185] MDIO READ: PHY: 14 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.050228] MDIO READ: PHY: 15 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.050271] MDIO READ: PHY: 15 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.050314] MDIO READ: PHY: 16 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.050357] MDIO READ: PHY: 16 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.050400] MDIO READ: PHY: 17 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.050443] MDIO READ: PHY: 17 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.050484] MDIO READ: PHY: 18 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.050527] MDIO READ: PHY: 18 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.050570] MDIO READ: PHY: 19 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.050614] MDIO READ: PHY: 19 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.050656] MDIO READ: PHY: 20 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.050700] MDIO READ: PHY: 20 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.050743] MDIO READ: PHY: 21 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.050786] MDIO READ: PHY: 21 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.050829] MDIO READ: PHY: 22 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.050871] MDIO READ: PHY: 22 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.050914] MDIO READ: PHY: 23 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.050957] MDIO READ: PHY: 23 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.051000] MDIO READ: PHY: 24 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.051043] MDIO READ: PHY: 24 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.051086] MDIO READ: PHY: 25 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.051129] MDIO READ: PHY: 25 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.051172] MDIO READ: PHY: 26 REG: 0x00000002 DATA: 0x0000FFFF
- [root@arm-linux]#IO READ: PHY: 26 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.051258] MDIO READ: PHY: 27 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.051301] MDIO READ: PHY: 27 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.051344] MDIO READ: PHY: 28 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.051387] MDIO READ: PHY: 28 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.051430] MDIO READ: PHY: 29 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.051473] MDIO READ: PHY: 29 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.051516] MDIO READ: PHY: 30 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.051559] MDIO READ: PHY: 30 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.051602] MDIO READ: PHY: 31 REG: 0x00000002 DATA: 0x0000FFFF
- [ 25.051644] MDIO READ: PHY: 31 REG: 0x00000003 DATA: 0x0000FFFF
- [ 25.051665] libphy: stmmac: probed
- [ 25.051691] eth0: PHY ID 00221430 at 1 IRQ 0 (stmmac-0:01)
- [ 25.051720] PHY driver name: Micrel KSZ886X Switch[ 25.051745] eth0: PHY ID 00221430 at 2 IRQ 0 (stmmac-0:02) active
- [ 25.051764] PHY driver name: Micrel KSZ886X Switch
- [ 25.051781] eth0: PHY ID 00221430 at 3 IRQ 0 (stmmac-0:03)
- [ 25.051799] PHY driver name: Micrel KSZ886X Switch[ 26.031616] MDIO READ: PHY: 2 REG: 0x00000004 DATA: 0x000005E1
- [ 26.031728] MDIO READ: PHY: 2 REG: 0x00000000 DATA: 0x00003120
- [ 27.015591] MDIO READ: PHY: 2 REG: 0x00000001 DATA: 0x0000782C
- [ 27.015690] MDIO READ: PHY: 2 REG: 0x00000001 DATA: 0x0000782C
- [ 27.015751] MDIO READ: PHY: 2 REG: 0x00000005 DATA: 0x00000541
- [ 27.015811] MDIO READ: PHY: 2 REG: 0x00000004 DATA: 0x000005E1
- [ 27.015873] MDIO READ: PHY: 2 REG: 0x00000001 DATA: 0x0000782C
- [ 27.015923] stmmc_pltfr_fix_mac_speed: fix speed to 100
- [ 27.015958] stmmc_pltfr_fix_mac_speed: fix speed for RMII
- [ 27.016010] libphy: stmmac-0:02 - Link is Up - 100/Full
- [root@arm-linux]#
Add Comment
Please, Sign In to add comment