SHARE
TWEET

boot sequence

a guest Sep 20th, 2012 84 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Starting kernel ...
  2.  
  3. Uncompressing Linux... done, booting the kernel.
  4. Linux version 3.0.15-01386-g5c661b1 (ericn@ericsony) (gcc version 4.4.4 (4.4.4_09.06.2010) ) #64 SMP PREEMPT Tue Jun 26 11:16:43 MST 2012
  5. CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
  6. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. Machine: Freescale i.MX 6Quad Sabre-Lite Board
  8. Memory policy: ECC disabled, Data cache writealloc
  9. PERCPU: Embedded 7 pages/cpu @8c008000 s5440 r8192 d15040 u32768
  10. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227328
  11. Kernel command line: console=ttymxc1,115200 vmalloc=400M root=/dev/mmcblk0p1 rootwait consoleblank=0 video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24 fbmem=28M,10M
  12. PID hash table entries: 4096 (order: 2, 16384 bytes)
  13. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  14. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  15. Memory: 640MB 256MB = 896MB total
  16. Memory: 897764k/897764k available, 150812k reserved, 0K highmem
  17. Virtual kernel memory layout:
  18.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  19.     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  20.     DMA     : 0xf4600000 - 0xffe00000   ( 184 MB)
  21.     vmalloc : 0xc0800000 - 0xf2000000   ( 792 MB)
  22.     lowmem  : 0x80000000 - 0xc0000000   (1024 MB)
  23.     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
  24.     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
  25.       .init : 0x80008000 - 0x80035000   ( 180 kB)
  26.       .text : 0x80035000 - 0x809eba64   (9947 kB)
  27.       .data : 0x809ec000 - 0x80a2f0a0   ( 269 kB)
  28.        .bss : 0x80a2f0c4 - 0x80a59e78   ( 172 kB)
  29. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  30. Preemptible hierarchical RCU implementation.
  31. NR_IRQS:496
  32. MXC GPIO hardware
  33. sched_clock: 32 bits at 6MHz, resolution 166ns, wraps every 715827ms
  34. MXC_Early serial console at MMIO 0x21e8000 (options '115200')
  35. bootconsole [ttymxc1] enabled
  36. Console: colour dummy device 80x30
  37. Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
  38. pid_max: default: 32768 minimum: 301
  39. Mount-cache hash table entries: 512
  40. CPU: Testing write buffer coherency: ok
  41. hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  42. CPU1: Booted secondary processor
  43. CPU2: Booted secondary processor
  44. CPU3: Booted secondary processor
  45. Brought up 4 CPUs
  46. SMP: Total of 4 processors activated (6324.22 BogoMIPS).
  47. print_constraints: dummy:
  48. NET: Registered protocol family 16
  49. print_constraints: vddpu: 725 <--> 1300 mV at 1100 mV fast normal
  50. print_constraints: vddcore: 725 <--> 1300 mV at 1100 mV fast normal
  51. print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal
  52. print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
  53. print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
  54. print_constraints: vdd3p0: 2800 <--> 3150 mV at 3000 mV fast normal
  55. ------------ Board type Nitrogen6X/W
  56. hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  57. hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
  58. hw-breakpoint: maximum watchpoint size is 4 bytes.
  59. L310 cache controller enabled
  60. l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x02070000, Cache size: 1048576 B
  61. IMX usb wakeup probe
  62. IMX usb wakeup probe
  63. bio: create slab <bio-0> at 0
  64. print_constraints: VDDA: 2500 mV
  65. print_constraints: VDDIO: 3300 mV
  66. machine_constraints_voltage: VDDD: unsupportable voltage constraints
  67. reg-fixed-voltage reg-fixed-voltage.2: Failed to register regulator: -22
  68. reg-fixed-voltage: probe of reg-fixed-voltage.2 failed with error -22
  69. print_constraints: vmmc: 3300 mV
  70. print_constraints: VDD_1.8V: 1800 mV
  71. SCSI subsystem initialized
  72. spi_imx imx6q-ecspi.0: probed
  73. usbcore: registered new interface driver usbfs
  74. usbcore: registered new interface driver hub
  75. usbcore: registered new device driver usb
  76. Freescale USB OTG Driver loaded, $Revision: 1.55 $
  77. add wake up source irq 75
  78. imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  79. imx-ipuv3 imx-ipuv3.1: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  80. mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 driver probed
  81. mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 dphy version is 0x3130302a
  82. MIPI CSI2 driver module loaded
  83. Advanced Linux Sound Architecture Driver Version 1.0.24.
  84. cfg80211: Calling CRDA to update world regulatory domain
  85. i2c-core: driver [max17135] using legacy suspend method
  86. i2c-core: driver [max17135] using legacy resume method
  87. Switching to clocksource mxc_timer1
  88. Switched to NOHz mode on CPU #0
  89. Switched to NOHz mode on CPU #2
  90. Switched to NOHz mode on CPU #1
  91. Switched to NOHz mode on CPU #3
  92. NET: Registered protocol family 2
  93. IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  94. TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  95. TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  96. TCP: Hash tables configured (established 131072 bind 65536)
  97. TCP reno registered
  98. UDP hash table entries: 512 (order: 2, 16384 bytes)
  99. UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  100. NET: Registered protocol family 1
  101. RPC: Registered named UNIX socket transport module.
  102. RPC: Registered udp transport module.
  103. RPC: Registered tcp transport module.
  104. RPC: Registered tcp NFSv4.1 backchannel transport module.
  105. Static Power Management for Freescale i.MX6
  106. cpaddr = c0884000 suspend_iram_base=c0932000
  107. PM driver module loaded
  108. i.MXC CPU frequency driver
  109. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  110. msgmni has been set to 1753
  111. io scheduler noop registered
  112. io scheduler deadline registered
  113. io scheduler cfq registered (default)
  114. MIPI DSI driver module loaded
  115. mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
  116. mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
  117. fbcvt: 1280x720@60: CVT Name - .921M9
  118. imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
  119. Console: switching to colour frame buffer device 160x45
  120. mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver lcd
  121. imx-ipuv3 imx-ipuv3.0: ext di clk already in use, go back to internal clk
  122. mxc_sdc_fb mxc_sdc_fb.2: register mxc display driver ldb
  123. _regulator_get: get() with no identifier
  124. mxc_sdc_fb mxc_sdc_fb.3: register mxc display driver ldb
  125. imx-sdma imx-sdma: loaded firmware 1.1
  126. imx-sdma imx-sdma: initialized
  127. Serial: IMX driver
  128. imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
  129. imx-uart.1: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
  130. old_ufcr=a81 new_ufcr=b01, old_ucr2=4027 new_ucr2=4027, old_ubir=f num=1f7, old_ubmr=15b denom=c34
  131. clk=80000000 div=7 num=504 denom=3125 baud=115200
  132. console [ttymxc1] enabled, bootconsole disabled
  133. console [ttymxc1] enabled, bootconsole disabled
  134. imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
  135. loop: module loaded
  136. Can't recover from RESET HBA!
  137. No sata disk.
  138. m25p80 spi0.0: sst25vf016b (2048 Kbytes)
  139. Creating 2 MTD partitions on "m25p80":
  140. 0x000000000000-0x000000040000 : "bootloader"
  141. 0x000000040000-0x000000200000 : "kernel"
  142. vcan: Virtual CAN interface driver
  143. CAN device driver interface
  144. flexcan netdevice driver
  145. flexcan imx6q-flexcan.0: device registered (reg_base=c09a8000, irq=142)
  146. FEC Ethernet Driver
  147. fec_enet_mii_bus: probed
  148. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  149. fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
  150. fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
  151. fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
  152. fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
  153. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  154. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  155. usb usb1: Product: Freescale On-Chip EHCI Host Controller
  156. usb usb1: Manufacturer: Linux 3.0.15-01386-g5c661b1 ehci_hcd
  157. usb usb1: SerialNumber: fsl-ehci.0
  158. hub 1-0:1.0: USB hub found
  159. hub 1-0:1.0: 1 port detected
  160. add wake up source irq 72
  161. fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
  162. fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
  163. fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
  164. fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
  165. usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  166. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  167. usb usb2: Product: Freescale On-Chip EHCI Host Controller
  168. usb usb2: Manufacturer: Linux 3.0.15-01386-g5c661b1 ehci_hcd
  169. usb usb2: SerialNumber: fsl-ehci.1
  170. hub 2-0:1.0: USB hub found
  171. hub 2-0:1.0: 1 port detected
  172. Initializing USB Mass Storage driver...
  173. usbcore: registered new interface driver usb-storage
  174. USB Mass Storage support registered.
  175. ARC USBOTG Device Controller driver (1 August 2005)
  176. mousedev: PS/2 mouse device common for all mice
  177. input: gpio-keys as /devices/platform/gpio-keys/input/input0
  178. tsc2004_prepare_for_reading: write_cmd -5
  179. tsc2004: probe of 2-0048 failed with error -5
  180. egalax_ts 2-0004: egalax_ts: failed to read firmware version
  181. egalax_ts: probe of 2-0004 failed with error -5
  182. i2c-core: driver [isl29023] using legacy suspend method
  183. i2c-core: driver [isl29023] using legacy resume method
  184. snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0
  185. i2c /dev entries driver
  186. Linux video capture interface: v2.00
  187. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
  188. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
  189. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video18
  190. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video19
  191. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video20
  192. mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video21
  193. i2c-core: driver [mag3110] using legacy suspend method
  194. i2c-core: driver [mag3110] using legacy resume method
  195. imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
  196. sdhci: Secure Digital Host Controller Interface driver
  197. sdhci: Copyright(c) Pierre Ossman
  198. sdhci sdhci-esdhc-imx.2: no write-protect pin available!
  199. mmc0: Unknown controller version (3). You may experience problems.
  200. mmc0: SDHCI controller on platform [sdhci-esdhc-imx.2] using ADMA
  201. sdhci sdhci-esdhc-imx.3: no write-protect pin available!
  202. mmc1: Unknown controller version (3). You may experience problems.
  203. mmc1: SDHCI controller on platform [sdhci-esdhc-imx.3] using ADMA
  204. mmc2: Unknown controller version (3). You may experience problems.
  205. usb 2-1: new high speed USB device number 2 using fsl-ehci
  206. mmc0: host does not support reading read-only switch. assuming write-enable.
  207. mmc2: SDHCI controller on platform [sdhci-esdhc-imx.1] using ADMA
  208. mmc0: new SDHC card at address 0002
  209. mmcblk0: mmc0:0002 SD4GB 3.69 GiB
  210.  mmcblk0: p1
  211. mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  212. VPU initialized
  213. mxc_asrc registered
  214. Anatop Thermal registered as thermal_zone0
  215. anatop_thermal_probe: default cooling device is cpufreq!
  216. usbcore: registered new interface driver usbhid
  217. usbhid: USB HID core driver
  218. mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
  219. sgtl5000 0-000a: Failed to get supply 'VDDD': -19
  220. print_constraints: 0-000a: 850 <--> 1600 mV at 1200 mV normal
  221. sgtl5000 0-000a: sgtl5000 revision 17
  222. usb 2-1: New USB device found, idVendor=0424, idProduct=2513
  223. usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  224. hub 2-1:1.0: USB hub found
  225. hub 2-1:1.0: 3 ports detected
  226. asoc: sgtl5000 <-> imx-ssi.1 mapping ok
  227. asoc: mxc-hdmi-soc <-> imx-hdmi-soc-dai.0 mapping ok
  228. ALSA device list:
  229.   #0: sgtl5000-audio
  230.   #1: imx-hdmi-soc
  231. NET: Registered protocol family 26
  232. TCP cubic registered
  233. NET: Registered protocol family 17
  234. can: controller area network core (rev 20090105 abi 8)
  235. NET: Registered protocol family 29
  236. can: raw protocol (rev 20090105)
  237. can: broadcast manager protocol (rev 20090105 t)
  238. lib80211: common routines for IEEE802.11 drivers
  239. VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  240. Bus freq driver module loaded
  241. mxc_dvfs_core_probe
  242. DVFS driver module loaded
  243. snvs_rtc snvs_rtc.0: setting system clock to 1970-01-01 00:02:34 UTC (154)
  244. EXT3-fs: barriers not enabled
  245. usb 2-1.2: new low speed USB device number 3 using fsl-ehci
  246. usb 2-1.2: New USB device found, idVendor=413c, idProduct=2105
  247. usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  248. usb 2-1.2: Product: Dell USB Keyboard
  249. usb 2-1.2: Manufacturer: Dell
  250. input: Dell Dell USB Keyboard as /devices/platform/fsl-ehci.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input1
  251. generic-usb 0003:413C:2105.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-fsl-ehci.1-1.2/input0
  252. kjournald starting.  Commit interval 5 seconds
  253. EXT3-fs (mmcblk0p1): warning: maximal mount count reached, running e2fsck is recommended
  254. EXT3-fs (mmcblk0p1): using internal journal
  255. EXT3-fs (mmcblk0p1): recovery complete
  256. EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode
  257. VFS: Mounted root (ext3 filesystem) on device 179:1.
  258. Freeing init memory: 180K
  259. Thermal: fuse data 0x58e5523a
  260. anatop_thermal_counting_ratio: raw25c=1422 raw_hot=1362 hot_temp=58
  261. mxc_sdc_fb mxc_sdc_fb.0: Unable to allocate framebuffer memory
  262. mxc_sdc_fb mxc_sdc_fb.2: Unable to allocate framebuffer memory
  263. mxc_v4l2_output mxc_v4l2_output.0: ERR: fb_set_var.
  264. mxc_v4l2_output mxc_v4l2_output.0: ERR: fb_set_var.
  265.  * Starting mDNS/DNS-SD daemon                                           [ OK ]
  266.  * Starting configure network device security                            [ OK ]
  267.  * Starting mDNS/DNS-SD daemon                                           [ OK ]
  268.  * Starting mDNS/DNS-SD daemon                                           [ OK ]
  269.  * Starting mDNS/DNS-SD daemon                                           [ OK ]
  270.  * Starting mDNS/DNS-SD daemon                                           [ OK ]
  271.  * Starting mDNS/DNS-SD daemon                                           [ OK ]
  272.  * Starting mDNS/DNS-SD daemon                                           [ OK ]
  273.  * Starting Mount network filesystems                                    [ OK ]
  274.  * Starting Upstart job to start rpcbind on boot only                    [ OK ]
  275.  * Starting Failsafe Boot Delay                                          [ OK ]
  276.  * Starting mDNS/DNS-SD daemon                                           [ OK ]
  277.  * Stopping Upstart job to start rpcbind on boot only                    [ OK ]
  278.  * Stopping Mount network filesystems                                    [ OK ]
  279.  * Starting mDNS/DNS-SD daemon                                           [ OK ]
  280.  * Starting mDNS/DNS-SD daemon                                           [ OK ]
  281.  * Starting mDNS/DNS-SD daemon                                           [fail]
  282.  * Stopping mDNS/DNS-SD daemon                                           [ OK ]
  283.  * Starting Bridge socket events into upstart                            [ OK ]
  284.  * Starting RPC portmapper replacement                                   [ OK ]
  285.  * Starting network connection manager                                   [ OK ]
  286.  * Stopping rpcsec_gss daemon                                            [ OK ]
  287.  * Starting Start this job to wait until rpcbind is started or fails to s[ OK ]
  288.  * Stopping Start this job to wait until rpcbind is started or fails to s[ OK ]
  289.  * Stopping Failsafe Boot Delay                                          [ OK ]
  290.  * Starting configure network device                                     [ OK ]
  291.  * Starting System V initialisation compatibility                        [ OK ]
  292.  * Starting NSM status monitor                                           [ OK ]
  293.  
  294.  * Starting Advanced Power Management daemon...                                 Last login: Thu Jan  1 00:00:39 UTC 1970 on tty1
  295.                                                                          [ OK ]
  296. Welcome to Linaro 11.10 (development branch) (GNU/Linux 3.0.15-01386-g5c661b1 armv7l)
  297.  
  298.  * Documentation:  https://wiki.linaro.org/
  299.  
  300. 301 packages can be updated.
  301. 53 updates are security updates.
  302.  
  303. speech-dispatcher disabled; edit /etc/default/speech-dispatcher
  304. Checking for running unattended-upgrades:
  305. root@linaro-ubuntu-desktop:~#  * Starting bluetooth                             Can't start daemon: Permission denied
  306.                                                                          [ OK ]
  307.  * PulseAudio configured for per-user sessions
  308. saned disabled; edit /etc/default/saned
  309.  1 Jan 00:03:11 ntpdate[5422]: no servers can be used, exiting
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top