Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00301
S - IMAGE_VARIANT_STRING=M8996LAB
S - OEM_IMAGE_VERSION_STRING=crm-ubuntu68
S - Boot Interface: UFS
S - Secure Boot: Off
S - Boot Config @ 0x00076044 = 0x000001c9
S - JTAG ID @ 0x000760f4 = 0x4003e0e1
S - OEM ID @ 0x000760f8 = 0x00000000
S - Serial Number @ 0x00074138 = 0x211c5985
S - OEM Config Row 0 @ 0x00074188 = 0x0000000000000000
S - OEM Config Row 1 @ 0x00074190 = 0x0000000000000000
S - Feature Config Row 0 @ 0x000741a0 = 0x0050000010000100
S - Feature Config Row 1 @ 0x000741a8 = 0x00fff00001ffffff
S - Core 0 Frequency, 1228 MHz
B -         0 - PBL, Start
B -     10413 - bootable_media_detect_entry, Start
B -     47493 - bootable_media_detect_success, Start
B -     47497 - elf_loader_entry, Start
B -     49054 - auth_hash_seg_entry, Start
B -     49157 - auth_hash_seg_exit, Start
B -     82428 - elf_segs_hash_verify_entry, Start
B -     84928 - PBL, End
B -     86986 - SBL1, Start
B -    182969 - usb: hs_phy_nondrive_start
B -    183305 - usb: PLL lock success - 0x3
B -    186324 - usb: hs_phy_nondrive_finish
B -    190442 - boot_flash_init, Start
D -        30 - boot_flash_init, Delta
B -    197548 - sbl1_ddr_set_default_params, Start
D -        30 - sbl1_ddr_set_default_params, Delta
B -    205539 - boot_config_data_table_init, Start
D -    165340 - boot_config_data_table_init, Delta - (60 Bytes)
B -    375424 - CDT Version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
B -    380121 - Image Load, Start
D -     22448 - PMIC Image Loaded, Delta - (37272 Bytes)
B -    402600 - pm_device_init, Start
B -    408364 - PON REASON:PM0:0x200000061 PM1:0x200000020
B -    444781 - PM_SET_VAL:Skip
D -     40016 - pm_device_init, Delta
B -    446703 - pm_driver_init, Start
D -      2897 - pm_driver_init, Delta
B -    453291 - pm_sbl_chg_init, Start
D -        91 - pm_sbl_chg_init, Delta
B -    460062 - vsense_init, Start
D -        30 - vsense_init, Delta
B -    469730 - Pre_DDR_clock_init, Start
D -       396 - Pre_DDR_clock_init, Delta
B -    473665 - ddr_initialize_device, Start
B -    477355 - 8996 v3.x detected, Max frequency = 1.8 GHz
B -    486993 - ddr_initialize_device, Delta
B -    487024 - DDR ID, Rank 0, Rank 1, 0x6, 0x300, 0x300
B -    490867 - Basic DDR tests done
B -    559614 - clock_init, Start
D -       244 - clock_init, Delta
B -    562969 - Image Load, Start
D -      4392 - QSEE Dev Config Image Loaded, Delta - (46008 Bytes)
B -    568459 - Image Load, Start
D -      5307 - APDP Image Loaded, Delta - (0 Bytes)
B -    577060 - usb: UFS Serial - 661c4915
B -    581421 - usb: fedl, vbus_low
B -    585051 - Image Load, Start
D -     55357 - QSEE Image Loaded, Delta - (1640572 Bytes)
B -    640408 - Image Load, Start
D -      2013 - SEC Image Loaded, Delta - (4096 Bytes)
B -    647972 - sbl1_efs_handle_cookies, Start
D -       488 - sbl1_efs_handle_cookies, Delta
B -    656482 - Image Load, Start
D -     14365 - QHEE Image Loaded, Delta - (254184 Bytes)
B -    670847 - Image Load, Start
D -     14061 - RPM Image Loaded, Delta - (223900 Bytes)
B -    685731 - Image Load, Start
D -      3172 - STI Image Loaded, Delta - (0 Bytes)
B -    692441 - Image Load, Start
D -     34831 - APPSBL Image Loaded, Delta - (748620 Bytes)
B -    727364 - SBL1, End
D -    644617 - SBL1, Delta
S - Flash Throughput, 95000 KB/s  (2958928 Bytes,  31068 us)
S - DDR Frequency, 1017 MHz
Android Bootloader - UART_DM Initialized!!!
[0] BUILD_VERSION=
[0] BUILD_DATE=15:12:02 - Jan  5 2019
[0] welcome to lk

[10] platform_init()
[10] target_init()
[10] RPM GLink Init
[10] Opening RPM Glink Port success
[10] Opening SSR Glink Port success
[20] Glink Connection between APPS and RPM established
[20] Glink Connection between APPS and RPM established
[40] UFS init success
[70] Qseecom Init Done in Appsbl
[70] secure app region addr=0x86600000 size=0x2200000[80] TZ App region notif returned with status:0 addr:86600000 size:35651584
[90] TZ App log region register returned with status:0 addr:916d4000 size:4096
[90] Qseecom TZ Init Done in Appsbl
[110] Loading cmnlib done
[110] qseecom_start_app: Loading app keymaster for the first time'
[140] <8>keymaster: "\"KEYMASTER Init \""
[150] Setting display_panel to none
[150] Selected panel: none
Skip panel configuration
[160] pm8x41_get_is_cold_boot: cold boot
[160] Unable to locate /bootselect partition
[170] boot_verifier: Device is in ORANGE boot state.
[170] Device is unlocked! Skipping verification...
[170] Loading (boot) image (12193792): start
[220] Loading (boot) image (12193792): done
[230] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
[230] Your device has been unlocked and can't be trusted.
[240] mdtp: mdtp_img loaded
[240] mdtp: is_test_mode: test mode is set to 1
[240] mdtp: read_metadata: SUCCESS
[260] LK SEC APP Handle: 0x1
[260] Return value from recv_data: 14
[270] Return value from recv_data: 14
[280] Return value from recv_data: 14
[290] decompressing kernel image: start
[520] decompressing kernel image: done
[530] qcom,msm-id entry not found
[530] Only one appended non-skales DTB, select it.
[530] cmdline: root=/dev/disk/by-partlabel/rootfs rw rootwait console=tty0 console=ttyMSM0,115200n8 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=661c4915 androidboot.baseband=apq [560] Updating device tree: start
[560] Updating device tree: done
[560] Return value from recv_data: 14
[570] RPM GLINK UnInit
[570] Qseecom De-Init Done in Appsbl
[570] booting linux @ 0x80080000, ramdisk @ 0x84000000 (4124513), tags/device tree @ 0x83e00000
[580] Jumping to kernel via monitor
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.0-qcomlt-arm64 (abuild@r2-a19) (gcc version 7.3.0 (Debian 7.3.0-25)) #1 SMP PREEMPT Fri Jul 20 11:50:10 UTC 2018
[    0.000000] Boot CPU: AArch64 Processor [511f2112]
[    0.000000] Machine model: Qualcomm Technologies, Inc. DB820c
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created DMA memory pool at 0x0000000090b00000, size 10 MiB
[    0.000000] OF: reserved mem: initialized node gpu@8f200000, compatible id shared-dma-pool
[    0.000000] cma: Reserved 16 MiB at 0x00000000df000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000015ea4ffff]
[    0.000000] NUMA: NODE_DATA [mem 0x15e9e7700-0x15e9e91ff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000015ea4ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000857fffff]
[    0.000000]   node   0: [mem 0x0000000091700000-0x00000000a1dfffff]
[    0.000000]   node   0: [mem 0x00000000a2000000-0x00000000dfffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000015ea4ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000015ea4ffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 23 pages/cpu @ffff8000de986000 s55704 r8192 d30312 u94208
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for Qualcomm Technologies Kryo erratum 1003
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 720042
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/disk/by-partlabel/rootfs rw rootwait console=tty0 console=ttyMSM0,115200n8 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=661c4915 androidboot.baseband=apq mdss_mdp.panel=0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] software IO TLB [mem 0xdafff000-0xdefff000] (64MB) mapped at [ffff80005afff000-ffff80005effefff]
[    0.000000] Memory: 2754304K/2925888K available (10684K kernel code, 1566K rwdata, 4868K rodata, 1152K init, 420K bss, 155200K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
[    0.000000]       .text : 0xffff000008080000 - 0xffff000008af0000   ( 10688 KB)
[    0.000000]     .rodata : 0xffff000008af0000 - 0xffff000008fc0000   (  4928 KB)
[    0.000000]       .init : 0xffff000008fc0000 - 0xffff0000090e0000   (  1152 KB)
[    0.000000]       .data : 0xffff0000090e0000 - 0xffff000009267a00   (  1567 KB)
[    0.000000]        .bss : 0xffff000009267a00 - 0xffff0000092d0de8   (   421 KB)
[    0.000000]     fixed   : 0xffff7dfffe7f9000 - 0xffff7dfffec00000   (  4124 KB)
[    0.000000]     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
[    0.000000]               0xffff7e0000000000 - 0xffff7e00037a9400   (    55 MB actual)
[    0.000000]     memory  : 0xffff800000000000 - 0xffff8000dea50000   (  3562 MB)
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000
[    0.000000] GICv2m: range[mem 0x09bd0000-0x09bd0fff], SPI[544:639]
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000280] Console: colour dummy device 80x25
[    0.000753] console [tty0] enabled
[    0.000805] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.000827] pid_max: default: 32768 minimum: 301
[    0.000896] Security Framework initialized
[    0.001678] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002065] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002104] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.002128] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.015746] ASID allocator initialised with 32768 entries
[    0.023744] Hierarchical SRCU implementation.
[    0.033997] EFI services will not be available.
[    0.039815] smp: Bringing up secondary CPUs ...
[    0.068344] Detected PIPT I-cache on CPU1
[    0.068372] GICv3: CPU1: found redistributor 1 region 0:0x0000000009c40000
[    0.068404] CPU1: Booted secondary processor [511f2112]
[    0.099009] Detected PIPT I-cache on CPU2
[    0.099860] GICv3: CPU2: found redistributor 100 region 0:0x0000000009c80000
[    0.100628] CPU2: Booted secondary processor [511f2052]
[    0.134823] Detected PIPT I-cache on CPU3
[    0.135643] GICv3: CPU3: found redistributor 101 region 0:0x0000000009cc0000
[    0.136369] CPU3: Booted secondary processor [511f2052]
[    0.139714] smp: Brought up 1 node, 4 CPUs
[    0.139795] SMP: Total of 4 processors activated.
[    0.139811] CPU features: detected feature: GIC system register CPU interface
[    0.139826] CPU features: detected feature: 32-bit EL0 Support
[    0.139837] CPU features: detected feature: Kernel page table isolation (KPTI)
[    0.207637] CPU: All CPU(s) started at EL1
[    0.208017] alternatives: patching kernel code
[    0.210813] devtmpfs: initialized
[    0.218714] random: get_random_u32 called from bucket_table_alloc+0x108/0x260 with crng_init=0
[    0.219272] Registered cp15_barrier emulation handler
[    0.219386] Registered setend emulation handler
[    0.219657] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.219736] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.220057] pinctrl core: initialized pinctrl subsystem
[    0.221578] DMI not present or invalid.
[    0.221870] NET: Registered protocol family 16
[    0.226709] cpuidle: using governor menu
[    0.227632] vdso: 2 pages (1 code @ ffff000008af6000, 1 data @ ffff0000090e5000)
[    0.227764] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers.
[    0.231226] DMA: preallocated 256 KiB pool for atomic allocations
[    0.231543] Serial: AMBA PL011 UART driver
[    0.274362] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.282589] ACPI: Interpreter disabled.
[    0.283039] reg-fixed-voltage soc:wlan-en-1-8v: could not find pctldev for node /soc/qcom,spmi@400f000/pmic@0/gpios@c000/wlan_en_gpios, deferring probe
[    0.284335] vgaarb: loaded
[    0.284569] SCSI subsystem initialized
[    0.286492] usbcore: registered new interface driver usbfs
[    0.286544] usbcore: registered new interface driver hub
[    0.286614] usbcore: registered new device driver usb
[    0.287429] pps_core: LinuxPPS API ver. 1 registered
[    0.287448] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.287481] PTP clock support registered
[    0.287621] EDAC MC: Ver: 3.0.0
[    0.290327] dmi: Firmware registration failed.
[    0.294416] Advanced Linux Sound Architecture Driver Initialized.
[    0.299260] clocksource: Switched to clocksource arch_sys_counter
[    0.299397] VFS: Disk quotas dquot_6.6.0
[    0.299448] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.299607] pnp: PnP ACPI: disabled
[    0.307437] s1: supplied by regulator-dummy
[    0.307617] s2: supplied by regulator-dummy
[    0.307760] s3: supplied by regulator-dummy
[    0.307794] s3: Bringing 0uV into 1300000-1300000uV
[    0.309337] s4: supplied by regulator-dummy
[    0.309378] s4: Bringing 0uV into 1800000-1800000uV
[    0.309996] NET: Registered protocol family 2
[    0.310020] s5: supplied by regulator-dummy
[    0.310059] s5: Bringing 0uV into 2150000-2150000uV
[    0.310320] s6: supplied by regulator-dummy
[    0.310472] s7: supplied by regulator-dummy
[    0.310507] s7: Bringing 0uV into 800000-800000uV
[    0.310558] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.310897] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.311084] TCP: Hash tables configured (established 32768 bind 32768)
[    0.311334] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.311344] s8: supplied by regulator-dummy
[    0.311403] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.311499] s9: supplied by regulator-dummy
[    0.311554] NET: Registered protocol family 1
[    0.311657] s10: supplied by regulator-dummy
[    0.311825] s11: supplied by regulator-dummy
[    0.311982] s12: supplied by regulator-dummy
[    0.312147] l1: supplied by s3
[    0.312187] l1: Bringing 0uV into 1000000-1000000uV
[    0.312696] l2: supplied by s3
[    0.312733] l2: Bringing 0uV into 1250000-1250000uV
[    0.313043] l3: supplied by s3
[    0.313080] l3: Bringing 0uV into 850000-850000uV
[    0.313382] l4: supplied by s3
[    0.313419] l4: Bringing 0uV into 1225000-1225000uV
[    0.313722] l5: supplied by s5
[    0.313907] l6: supplied by regulator-dummy
[    0.313947] l6: Bringing 0uV into 1200000-1200000uV
[    0.314270] l7: supplied by s5
[    0.314475] l8: supplied by regulator-dummy
[    0.314521] l8: Bringing 0uV into 1800000-1800000uV
[    0.314798] l9: supplied by regulator-dummy
[    0.314832] l9: Bringing 0uV into 1800000-1800000uV
[    0.315730] l10: supplied by regulator-dummy
[    0.315773] l10: Bringing 0uV into 1800000-1800000uV
[    0.316052] l11: supplied by s3
[    0.316115] l11: Bringing 0uV into 1150000-1150000uV
[    0.316413] l12: supplied by regulator-dummy
[    0.316447] l12: Bringing 0uV into 1800000-1800000uV
[    0.316693] l13: supplied by regulator-dummy
[    0.316727] l13: Bringing 0uV into 1800000-1800000uV
[    0.317036] l14: supplied by s5
[    0.317084] l14: Bringing 0uV into 1800000-1800000uV
[    0.317230] RPC: Registered named UNIX socket transport module.
[    0.317244] RPC: Registered udp transport module.
[    0.317253] RPC: Registered tcp transport module.
[    0.317262] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.317408] l15: supplied by s5
[    0.317444] l15: Bringing 0uV into 1800000-1800000uV
[    0.317457] Unpacking initramfs...
[    0.317918] l16: supplied by regulator-dummy
[    0.317963] l16: Bringing 0uV into 2700000-2700000uV
[    0.318248] l17: supplied by regulator-dummy
[    0.318294] l17: Bringing 0uV into 2500000-2500000uV
[    0.318602] l18: supplied by regulator-dummy
[    0.318638] l18: Bringing 0uV into 2700000-2700000uV
[    0.318992] l19: supplied by regulator-dummy
[    0.319030] l19: Bringing 0uV into 3000000-3000000uV
[    0.319350] l20: supplied by s5
[    0.319386] l20: Bringing 0uV into 2950000-2950000uV
[    0.319724] l21: supplied by s5
[    0.319763] l21: Bringing 0uV into 2950000-2950000uV
[    0.320102] l22: supplied by regulator-dummy
[    0.320138] l22: Bringing 0uV into 3300000-3300000uV
[    0.320453] l23: supplied by regulator-dummy
[    0.320492] l23: Bringing 0uV into 2800000-2800000uV
[    0.320800] l24: supplied by regulator-dummy
[    0.320834] l24: Bringing 0uV into 3075000-3075000uV
[    0.321165] l25: supplied by s3
[    0.321203] l25: Bringing 0uV into 1200000-1200000uV
[    0.321507] l26: supplied by s3
[    0.321719] l27: supplied by s3
[    0.321752] l27: Bringing 0uV into 1000000-1000000uV
[    0.322076] l28: supplied by s3
[    0.322116] l28: Bringing 0uV into 925000-925000uV
[    0.322416] l29: supplied by regulator-dummy
[    0.322454] l29: Bringing 0uV into 2800000-2800000uV
[    0.322789] l30: supplied by regulator-dummy
[    0.322829] l30: Bringing 0uV into 1800000-1800000uV
[    0.323666] l31: supplied by s3
[    0.324037] l32: supplied by regulator-dummy
[    0.324077] l32: Bringing 0uV into 1800000-1800000uV
[    0.324527] lvs1: supplied by regulator-dummy
[    0.324864] lvs2: supplied by regulator-dummy
[    0.456759] Freeing initrd memory: 4024K
[    0.460977] kvm [1]: HYP mode not available
[    0.467946] audit: initializing netlink subsys (disabled)
[    0.477592] audit: type=2000 audit(0.467:1): state=initialized audit_enabled=0 res=1
[    0.477940] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    0.483217] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.488939] NFS: Registering the id_resolver key type
[    0.488985] Key type id_resolver registered
[    0.488995] Key type id_legacy registered
[    0.489009] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.489173] 9p: Installing v9fs 9p2000 file system support
[    0.492658] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.492682] io scheduler noop registered
[    0.492834] io scheduler cfq registered (default)
[    0.492847] io scheduler mq-deadline registered
[    0.492856] io scheduler kyber registered
[    0.500366] qcom-qmp-phy 34000.phy: Registered Qcom-QMP phy
[    0.500909] qcom-qmp-phy 7410000.phy: Registered Qcom-QMP phy
[    0.502554] ufs_qcom_phy_qmp_14nm 627000.ufsphy: invalid resource
[    0.502787] ufs_qcom_phy_qmp_14nm 627000.ufsphy: 627000.ufsphy supply vdda-pll not found, using dummy regulator
[    0.502876] ufs_qcom_phy_qmp_14nm 627000.ufsphy: 627000.ufsphy supply vdda-phy not found, using dummy regulator
[    0.508802] qcom-pcie 600000.qcom,pcie: Failed to get supply 'vddpe-3v3': -517
[    0.509744] qcom-pcie 608000.qcom,pcie: 608000.qcom,pcie supply vddpe-3v3 not found, using dummy regulator
[    0.510611] OF: PCI: host bridge /soc/agnoc@0/qcom,pcie@00608000 ranges:
[    0.510652] OF: PCI:    IO 0x0d200000..0x0d2fffff -> 0x0d200000
[    0.510671] OF: PCI:   MEM 0x0d300000..0x0dffffff -> 0x0d300000
[    1.515895] qcom-pcie 608000.qcom,pcie: phy link never came up
[    1.517822] qcom-pcie 608000.qcom,pcie: cannot initialize host
[    1.518145] qcom-pcie: probe of 608000.qcom,pcie failed with error -110
[    1.518886] qcom-pcie 610000.qcom,pcie: 610000.qcom,pcie supply vddpe-3v3 not found, using dummy regulator
[    1.519246] OF: PCI: host bridge /soc/agnoc@0/qcom,pcie@00610000 ranges:
[    1.519280] OF: PCI:    IO 0x0e200000..0x0e2fffff -> 0x0e200000
[    1.519297] OF: PCI:   MEM 0x0e300000..0x0fffffff -> 0x0e300000
[    1.624331] qcom-pcie 610000.qcom,pcie: link up
[    1.624491] qcom-pcie 610000.qcom,pcie: PCI host bridge to bus 0002:00
[    1.624508] pci_bus 0002:00: root bus resource [bus 00-ff]
[    1.624522] pci_bus 0002:00: root bus resource [io  0x100000-0x1fffff] (bus address [0xe200000-0xe2fffff])
[    1.624537] pci_bus 0002:00: root bus resource [mem 0x0e300000-0x0fffffff]
[    1.639206] pci 0002:00:00.0: BAR 14: assigned [mem 0x0e300000-0x0e3fffff]
[    1.639226] pci 0002:00:00.0: BAR 0: assigned [mem 0x0e400000-0x0e400fff 64bit]
[    1.639252] pci 0002:00:00.0: BAR 13: assigned [io  0x100000-0x100fff]
[    1.639272] pci 0002:01:00.0: BAR 0: assigned [mem 0x0e300000-0x0e33ffff 64bit]
[    1.639459] pci 0002:01:00.0: BAR 2: assigned [io  0x100000-0x10007f]
[    1.639523] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[    1.639536] pci 0002:00:00.0:   bridge window [io  0x100000-0x100fff]
[    1.639553] pci 0002:00:00.0:   bridge window [mem 0x0e300000-0x0e3fffff]
[    1.639953] pcieport 0002:00:00.0: Signaling PME with IRQ 136
[    1.640090] pcieport 0002:00:00.0: AER enabled with IRQ 136
[    1.640209] pci 0002:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    1.673521] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.678663] SuperH (H)SCI(F) driver initialized
[    1.680113] msm_serial 7570000.serial: msm_serial: detected port #2
[    1.680202] msm_serial 7570000.serial: uartclk = 19200000
[    1.680304] 7570000.serial: ttyMSM2 at MMIO 0x7570000 (irq = 9, base_baud = 1200000) is a MSM
[    1.680641] serial serial0: tty port ttyMSM2 registered
[    1.681266] msm_serial 75b0000.serial: msm_serial: detected port #0
[    1.681347] msm_serial 75b0000.serial: uartclk = 7372800
[    1.681444] 75b0000.serial: ttyMSM0 at MMIO 0x75b0000 (irq = 12, base_baud = 460800) is a MSM
[    1.681504] msm_serial: console setup on port #0
[    3.191745] console [ttyMSM0] enabled
[    3.197327] msm_serial: driver initialized
[    3.201345] arm-smmu da0000.arm,smmu: probing hardware configuration...
[    3.203997] arm-smmu da0000.arm,smmu: SMMUv2 with:
[    3.210543] arm-smmu da0000.arm,smmu:        stage 1 translation
[    3.215346] arm-smmu da0000.arm,smmu:        address translation ops
[    3.220826] arm-smmu da0000.arm,smmu:        non-coherent table walk
[    3.226632] arm-smmu da0000.arm,smmu:        (IDR0.CTTW overridden by FW configuration)
[    3.232466] arm-smmu da0000.arm,smmu:        stream matching with 4 register groups
[    3.240037] arm-smmu da0000.arm,smmu:        2 context banks (0 stage-2 only)
[    3.247157] arm-smmu da0000.arm,smmu:        Supported page sizes: 0x63315000
[    3.253547] arm-smmu da0000.arm,smmu:        Stage-1: 32-bit VA -> 36-bit IPA
[    3.261794] arm-smmu d00000.arm,smmu: probing hardware configuration...
[    3.266764] arm-smmu d00000.arm,smmu: SMMUv2 with:
[    3.273368] arm-smmu d00000.arm,smmu:        stage 1 translation
[    3.278196] arm-smmu d00000.arm,smmu:        address translation ops
[    3.283663] arm-smmu d00000.arm,smmu:        non-coherent table walk
[    3.289480] arm-smmu d00000.arm,smmu:        (IDR0.CTTW overridden by FW configuration)
[    3.295302] arm-smmu d00000.arm,smmu:        stream matching with 2 register groups
[    3.302881] arm-smmu d00000.arm,smmu:        2 context banks (0 stage-2 only)
[    3.309992] arm-smmu d00000.arm,smmu:        Supported page sizes: 0x63315000
[    3.316402] arm-smmu d00000.arm,smmu:        Stage-1: 32-bit VA -> 36-bit IPA
[    3.324311] arm-smmu 1600000.arm,smmu-lpass_q6: probing hardware configuration...
[    3.329609] arm-smmu 1600000.arm,smmu-lpass_q6: SMMUv2 with:
[    3.337256] arm-smmu 1600000.arm,smmu-lpass_q6:      stage 1 translation
[    3.342962] arm-smmu 1600000.arm,smmu-lpass_q6:      address translation ops
[    3.349302] arm-smmu 1600000.arm,smmu-lpass_q6:      non-coherent table walk
[    3.355974] arm-smmu 1600000.arm,smmu-lpass_q6:      (IDR0.CTTW overridden by FW configuration)
[    3.362677] arm-smmu 1600000.arm,smmu-lpass_q6:      stream matching with 15 register groups
[    3.370761] arm-smmu 1600000.arm,smmu-lpass_q6:      12 context banks (0 stage-2 only)
[    3.379097] arm-smmu 1600000.arm,smmu-lpass_q6:      Supported page sizes: 0x63315000
[    3.386448] arm-smmu 1600000.arm,smmu-lpass_q6:      Stage-1: 36-bit VA -> 36-bit IPA
[    3.396051] arm-smmu d40000.arm,smmu-venus: probing hardware configuration...
[    3.401482] arm-smmu d40000.arm,smmu-venus: SMMUv2 with:
[    3.408622] arm-smmu d40000.arm,smmu-venus:  stage 1 translation
[    3.413960] arm-smmu d40000.arm,smmu-venus:  address translation ops
[    3.419947] arm-smmu d40000.arm,smmu-venus:  non-coherent table walk
[    3.426284] arm-smmu d40000.arm,smmu-venus:  (IDR0.CTTW overridden by FW configuration)
[    3.432631] arm-smmu d40000.arm,smmu-venus:  stream matching with 42 register groups
[    3.440393] arm-smmu d40000.arm,smmu-venus:  7 context banks (0 stage-2 only)
[    3.448380] arm-smmu d40000.arm,smmu-venus:  Supported page sizes: 0x63315000
[    3.455364] arm-smmu d40000.arm,smmu-venus:  Stage-1: 32-bit VA -> 36-bit IPA
[    3.497641] loop: module loaded
[    3.504927] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[    3.509518] scsi host0: ufshcd
[    3.532982] spi_qup 7575000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    3.534661] spi_qup 75ba000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    3.541845] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[    3.545873] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[    3.569393] s1: supplied by regulator-dummy
[    3.569953] s2: supplied by regulator-dummy
[    3.572527] s2: Bringing 1270000uV into 1015000-1015000uV
[    3.577521] l1: supplied by regulator-dummy
[    3.584242] libphy: Fixed MDIO Bus: probed
[    3.586645] tun: Universal TUN/TAP device driver, 1.6
[    3.591832] atl1c 0002:01:00.0: enabling device (0000 -> 0002)
[    3.621082] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
[    3.621392] ufshcd_get_max_icc_level: Couldn't find valid icc_level = 0
[    3.621986] scsi 0:0:0:49488: Well-known LUN    TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[    3.636846] atl1c 0002:01:00.0: version 1.0.1.1-NAPI
[    3.638235] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    3.638239] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    3.638313] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    3.638316] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.638379] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    3.638384] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    3.639153] sky2: driver version 1.30
[    3.639919] usbcore: registered new interface driver rtl8150
[    3.639979] usbcore: registered new interface driver r8152
[    3.640031] usbcore: registered new interface driver asix
[    3.640073] usbcore: registered new interface driver ax88179_178a
[    3.640604] VFIO - User Level meta-driver version: 0.3
[    3.646907] dwc3 7600000.dwc3: failed to initialize core
[    3.653583] dwc3 6a00000.dwc3: failed to initialize core
[    3.655590] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.655626] ehci-pci: EHCI PCI platform driver
[    3.655677] ehci-platform: EHCI generic platform driver
[    3.655951] ehci-orion: EHCI orion driver
[    3.656150] ehci-exynos: EHCI EXYNOS driver
[    3.656527] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[    3.656722] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.656738] ohci-pci: OHCI PCI platform driver
[    3.656798] ohci-platform: OHCI generic platform driver
[    3.657031] ohci-exynos: OHCI EXYNOS driver
[    3.657953] usbcore: registered new interface driver usb-storage
[    3.658056] usbcore: registered new interface driver usbserial
[    3.658103] usbcore: registered new interface driver usbserial_generic
[    3.658145] usbserial: USB Serial support registered for generic
[    3.664543] i2c /dev entries driver
[    3.665852] i2c_qup 75b5000.i2c: using default clock-frequency 100000
[    3.665865] i2c_qup 75b5000.i2c:
[    3.665865]  tx channel not available
[    3.669027] i2c_qup 75b6000.i2c: using default clock-frequency 100000
[    3.669039] i2c_qup 75b6000.i2c:
[    3.669039]  tx channel not available
[    3.669951] i2c_qup 7577000.i2c: using default clock-frequency 100000
[    3.669962] i2c_qup 7577000.i2c:
[    3.669962]  tx channel not available
[    3.694595] input: pm8941_pwrkey as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:pwrkey/input/input0
[    3.697796] input: pm8941_pwrkey as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:resin/input/input1
[    3.704426] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 614400 KHz
[    3.704561] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 652800 KHz
[    3.706341] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 19200 KHz
[    3.706413] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 307200 KHz
[    3.707685] sdhci: Secure Digital Host Controller Interface driver
[    3.707687] sdhci: Copyright(c) Pierre Ossman
[    3.708085] Synopsys Designware Multimedia Card Interface Driver
[    3.709498] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.711020] sdhci_msm 74a4900.sdhci: Got CD GPIO
[    3.775159] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using ADMA 64-bit
[    3.938579] ledtrig-cpu: registered to indicate activity on CPUs
[    3.947410] usbcore: registered new interface driver usbhid
[    3.952164] usbhid: USB HID core driver
[    3.952214] scsi 0:0:0:49456: Well-known LUN    TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[    3.962191] random: fast init done
[    3.970001] scsi 0:0:0:49476: Well-known LUN    TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[    3.972535] usbcore: registered new interface driver snd-usb-audio
[    3.973667] NET: Registered protocol family 10
[    3.974191] Segment Routing with IPv6
[    3.974218] NET: Registered protocol family 17
[    3.974257] 9pnet: Installing 9P2000 support
[    3.974303] Key type dns_resolver registered
[    3.974862] registered taskstats version 1
[    3.986795] qcom-qusb2-phy 7411000.phy: Registered Qcom-QUSB2 phy
[    3.987275] qcom-qusb2-phy 7412000.phy: Registered Qcom-QUSB2 phy
[    3.987808] qcom-pcie 600000.qcom,pcie: Unbalanced pm_runtime_enable!
[    3.988376] OF: PCI: host bridge /soc/agnoc@0/qcom,pcie@00600000 ranges:
[    3.988396] OF: PCI:    IO 0x0c200000..0x0c2fffff -> 0x0c200000
[    3.988404] OF: PCI:   MEM 0x0c300000..0x0cffffff -> 0x0c300000
[    4.048236] scsi 0:0:0:0: Direct-Access     TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[    4.053206] scsi 0:0:0:1: Direct-Access     TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[    4.054080] sd 0:0:0:0: [sda] 6335488 4096-byte logical blocks: (26.0 GB/24.2 GiB)
[    4.054343] sd 0:0:0:0: [sda] Write Protect is off
[    4.054849] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.058567]  sda: sda1
[    4.060805] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.093506] scsi 0:0:0:2: Direct-Access     TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[    4.094573] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[    4.102483] sd 0:0:0:1: [sdb] Write Protect is off
[    4.103204] scsi 0:0:0:3: Direct-Access     TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[    4.104854] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[    4.105052] sd 0:0:0:2: [sdc] Write Protect is off
[    4.105548] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.105804] scsi 0:0:0:4: Direct-Access     TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[    4.106870] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB)
[    4.107114] sd 0:0:0:3: [sdd] Write Protect is off
[    4.107639] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.109131] scsi 0:0:0:5: Direct-Access     TOSHIBA  THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
[    4.116331] sd 0:0:0:5: [sdf] 393216 4096-byte logical blocks: (1.61 GB/1.50 GiB)
[    4.117627]  sdc: sdc1
[    4.117690] sd 0:0:0:5: [sdf] Write Protect is off
[    4.118041] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.120746] sd 0:0:0:2: [sdc] Attached SCSI disk
[    4.124689]  sdd: sdd1 sdd2 sdd3
[    4.124722]  sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9
[    4.124849] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB)
[    4.125056] sd 0:0:0:4: [sde] Write Protect is off
[    4.125666] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.128555] sd 0:0:0:5: [sdf] Attached SCSI disk
[    4.129174] sd 0:0:0:3: [sdd] Attached SCSI disk
[    4.131390]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30
[    4.136190] sd 0:0:0:4: [sde] Attached SCSI disk
[    4.174970] qcom-pcie 600000.qcom,pcie: link up
[    4.175123] qcom-pcie 600000.qcom,pcie: PCI host bridge to bus 0000:00
[    4.175129] pci_bus 0000:00: root bus resource [bus 00-ff]
[    4.175134] pci_bus 0000:00: root bus resource [io  0x200000-0x2fffff] (bus address [0xc200000-0xc2fffff])
[    4.175137] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
[    4.191217] pci 0000:00:00.0: BAR 14: assigned [mem 0x0c400000-0x0c5fffff]
[    4.191222] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
[    4.191235] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
[    4.191359] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    4.191365] pci 0000:00:00.0:   bridge window [mem 0x0c400000-0x0c5fffff]
[    4.191735] pcieport 0000:00:00.0: Signaling PME with IRQ 215
[    4.191823] pcieport 0000:00:00.0: AER enabled with IRQ 215
[    4.192709] arm-smmu b40000.arm,smmu: probing hardware configuration...
[    4.192713] arm-smmu b40000.arm,smmu: SMMUv2 with:
[    4.192754] arm-smmu b40000.arm,smmu:        stage 1 translation
[    4.192756] arm-smmu b40000.arm,smmu:        address translation ops
[    4.192758] arm-smmu b40000.arm,smmu:        non-coherent table walk
[    4.192760] arm-smmu b40000.arm,smmu:        (IDR0.CTTW overridden by FW configuration)
[    4.192764] arm-smmu b40000.arm,smmu:        stream matching with 2 register groups
[    4.192791] arm-smmu b40000.arm,smmu:        2 context banks (0 stage-2 only)
[    4.192817] arm-smmu b40000.arm,smmu:        Supported page sizes: 0x63315000
[    4.192819] arm-smmu b40000.arm,smmu:        Stage-1: 48-bit VA -> 36-bit IPA
[    4.202403] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    4.202421] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    4.202735] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x02010010
[    4.202770] xhci-hcd xhci-hcd.0.auto: irq 179, io mem 0x06a00000
[    4.204123] input: gpio_keys as /devices/platform/gpio_keys/input/input2
[    4.204784] hctosys: unable to open rtc device (rtc0)
[    4.205565] ALSA device list:
[    4.205567]   No soundcards found.
[    4.206458] hub 1-0:1.0: USB hub found
[    4.206517] hub 1-0:1.0: 1 port detected
[    4.206695] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    4.206704] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    4.206711] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[    4.206850] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.207358] hub 2-0:1.0: USB h¦[    4.494870] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.509329]  sdb: sdb1
[    4.512538] sd 0:0:0:1: [sdb] Attached SCSI disk
[    4.513198] Freeing unused kernel memory: 1152K
Loading, please wait...
[    4.539037] usb 1-1: new high-speed USB device number 2 using xhci-hcd
starting version 239
[    4.719150] hub 1-1:1.0: USB hub found
[    4.719895] hub 1-1:1.0: 4 ports detected
[    4.815265] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[    4.847054] hub 2-1:1.0: USB hub found
[    4.847377] hub 2-1:1.0: 4 ports detected
[    4.882410] rtc-pm8xxx 400f000.qcom,spmi:pmic@0:rtc@6000: rtc core: registered pm8xxx_rtc as rtc0
[    4.932857] atl1c 0002:01:00.0 enP2p1s0: renamed from eth0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.32.1
fsck: error 2 (No such file or directory) while executing fsck.ext4 for /dev/sda1
fsck exited with status code 8
done.
Warning: File system check failed but did not detect errors
[   10.300482] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[   10.415886] systemd[1]: System time before build time, advancing clock.
[   10.444437] ip_tables: (C) 2000-2006 Netfilter Core Team

Welcome to Debian GNU/Linux buster/sid!

File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[   10.645353] random: systemd: uninitialized urandom read (16 bytes read)
[   10.645807] random: systemd: uninitialized urandom read (16 bytes read)
[   10.651250] random: systemd: uninitialized urandom read (16 bytes read)
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
         Starting Create list of required st…ce nodes for the current kernel...
         Mounting Kernel Debug File System...
[  OK  ] Created slice User and Session Slice.
[  OK  ] Reached target Slices.
[  OK  ] Listening on fsck to fsckd communication Socket.
         Starting Remoun[   10.715498] EXT4-fs (sda1): re-mounted. Opts: data=ordered
t Root and Kernel File Systems...
         Starting Load Kernel Modules...
         Starting Nameserver information manager...
[  OK  ] Listening on udev Control Socket.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Listening on Journal Audit Socket.
         Starting Set the console keyboard layout...
[  OK  ] Listening on Syslog Socket.
         Starting Journal Service...
[  OK  ] Reached target Remote File Systems.
[  OK  ] Created slice system-getty.slice.
         Mounting Huge Pages File System...
[  OK  ] Reached target Swap.
         Mounting POSIX Message Queue File System...
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Reached target Paths.
         Starting udev Coldplug all Devices...
[  OK  ] Set up automount Arbitrary Executab…rmats File System Automount Point.
[  OK  ] Started Create list of required sta…vice nodes for the current kernel.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted POSIX Message Queue File System.
         Starting Apply Kernel Variables...
         Mounting Kernel Configuration File System...
         Starting Create System Users...
         Starting Load/Save Random Seed...
[  OK  ] Started Nameserver information manager.
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Create System Users.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started udev Kernel Device Manager.
[   11.027799] systemd-journald[1764]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started Set the console keyboard layout.
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Raise network interfaces...
         Starting Set console font and keymap...
         Starting Create Volatile Files and Directories...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Set console font and keymap.
[  OK  ] Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
         Starting Network Time Synchronization...
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[   11.384624] qcom_adsp_pil adsp-pil: adsp-pil supply cx not found, using dummy regulator
[   11.384740] qcom_adsp_pil adsp-pil: adsp-pil supply px not found, using dummy regulator
[   11.401789] NET: Registered protocol family 42
[   11.402471] remoteproc remoteproc0: adsp-pil is available
[   11.409033] remoteproc remoteproc0: powering up adsp-pil
[   11.410604] remoteproc remoteproc0: Booting fw image adsp.mdt, size 7196
[  OK  ] Started Network Time Synchronization.
[  OK  ] Started Raise network interfaces.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on GPS (Global Positioning System) Daemon Sockets.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
[  OK  ] Started D-Bus System Message Bus.
         Starting Modem Manager...
         Starting Network Manager...
[   11.588958] remoteproc remoteproc0: remote processor adsp-pil is now up
         Starting System Logging Service...
         Starting LSB: Load kernel modules needed to enable cpufreq scaling...
         Starting Restore /etc/resolv.conf i…fore the ppp link was shut down...
         Starting Disk Manager...
         Starting QRTR service...
         Starting Initialize hardware monitoring sensors...
[  OK  ] Started Regular background program processing daemon.
         Starting WPA supplicant...
[   11.796344] media: Linux media interface: v0.10
         Starting Login Service...
[   11.839996] Linux video capture interface: v2.00
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Daily apt download activities.
[   11.883122] Bluetooth: Core ver 2.22
[   11.883191] NET: Registered protocol family 31
[   11.887582] Bluetooth: HCI device and connection manager initialized
[   11.890972] Bluetooth: HCI socket layer initialized
[   11.903963] Bluetooth: L2CAP socket layer initialized
[   11.904027] Bluetooth: SCO socket layer initialized
[   11.904684] iommu: Adding device c00000.video-codec to group 0
[   11.906363] qcom-venus c00000.video-codec: Linked as a consumer to d40000.arm,smmu-venus
[  OK  ] Started Daily rotation of log files.
[   11.946301] Bluetooth: HCI UART driver ver 2.3
[   11.946334] Bluetooth: HCI UART protocol H4 registered
[   11.949772] Bluetooth: HCI UART protocol BCSP registered
[   11.955809] Bluetooth: HCI UART protocol LL registered
[   11.965565] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   11.965670] Bluetooth: HCI UART protocol QCA registered
[   11.973731] Bluetooth: hci0: ROME setup
[   11.976628] Bluetooth: hci0: Set UART speed to 3000000
[  OK  ] Started Trigger anacron every hour.
[  OK  ] Started Run anacron jobs.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Reached target Timers.
[   12.048171] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
[  OK  ] Started System Logging Service.
[   12.054056] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[  OK  ] Started Restore /etc/resolv.conf if…before the ppp link was shut down.
[   12.089087] iommu: Adding device a34000.camss to group 1
[   12.089373] qcom-camss a34000.camss: Linked as a consumer to da0000.arm,smmu
[   12.095668] iommu: Adding device b00000.gpu to group 2
[   12.100660] adreno b00000.gpu: Linked as a consumer to b40000.arm,smmu
[   12.120985] iommu: Adding device 901000.mdp to group 3
[   12.121100] msm_mdp 901000.mdp: Linked as a consumer to d00000.arm,smmu
[  OK  ] Started QRTR service.
[   12.141501] msm_hdmi_phy 9a0600.hdmi-phy: Using legacy clk name binding.  Use "iface" instead of "iface_clk"
[   12.141569] msm_hdmi_phy 9a0600.hdmi-phy: Using legacy clk name binding.  Use "ref" instead of "ref_clk"
[  OK  ] Started Initialize hardware monitoring sensors.
[   12.180478] msm 900000.mdss: Using legacy clk name binding.  Use "iface" instead of "iface_clk"
[   12.181796] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:CORE:4:3
[   12.181873] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:AFE:4:4
[   12.181914] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:ASM:4:7
[   12.181960] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:ADM:4:8
[   12.218480] msm 900000.mdss: 900000.mdss supply vdd not found, using dummy regulator
[   12.227377] msm_mdp 901000.mdp: Using legacy clk name binding.  Use "bus" instead of "bus_clk"
[   12.234518] msm_mdp 901000.mdp: Using legacy clk name binding.  Use "iface" instead of "iface_clk"
[   12.242522] msm_mdp 901000.mdp: Using legacy clk name binding.  Use "core" instead of "core_clk"
[   12.242559] msm_mdp 901000.mdp: Using legacy clk name binding.  Use "vsync" instead of "vsync_clk"
[   12.242755] msm_mdp 901000.mdp: MDP5 version v1.7
[   12.242995] msm 900000.mdss: bound 901000.mdp (ops mdp5_ops [msm])
[   12.243424] hdmi_msm 9a0000.hdmi-tx: Using legacy clk name binding.  Use "iface" instead of "iface_clk"
[   12.243449] hdmi_msm 9a0000.hdmi-tx: Using legacy clk name binding.  Use "core" instead of "core_clk"
[   12.243461] hdmi_msm 9a0000.hdmi-tx: Using legacy clk name binding.  Use "mdp_core" instead of "mdp_core_clk"
[   12.243500] hdmi_msm 9a0000.hdmi-tx: Using legacy clk name binding.  Use "extp" instead of "extp_clk"
[   12.243528] hdmi_msm 9a0000.hdmi-tx: Using legacy clk name binding.  Use "alt_iface" instead of "alt_iface_clk"
[   12.244807] msm 900000.mdss: bound 9a0000.hdmi-tx (ops msm_hdmi_ops [msm])
[   12.245166] adreno b00000.gpu: b00000.gpu supply vdd not found, using dummy regulator
[   12.245212] adreno b00000.gpu: b00000.gpu supply vddcx not found, using dummy regulator
[   12.245235] msm 900000.mdss: A530: using IOMMU
[   12.246403] msm 900000.mdss: bound b00000.gpu (ops a3xx_ops [msm])
[   12.291758] Bluetooth: hci0: ROME controller version 0x00440302
[   12.291769] Bluetooth: hci0: ROME Downloading qca/rampatch_00440302.bin
[   12.294035] bluetooth hci0: Direct firmware load for qca/rampatch_00440302.bin failed with error -2
[   12.294049] Bluetooth: hci0: Failed to request file: qca/rampatch_00440302.bin (-2)
[   12.294057] Bluetooth: hci0: Failed to download patch (-2)
[   12.363110] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[   12.363150] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
[   12.365886] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 0000:0000
[   12.365890] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
[   12.366543] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb
[   12.399135] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.399136] [drm] Driver supports precise vblank timestamp query.
[   12.399551] [drm] Initialized msm 1.3.0 20130625 for 900000.mdss on minor 0
[   12.434782] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=1 from ath10k/QCA6174/hw3.0/board-2.bin
[   12.435434] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id 0:1 crc32 ed5f849a
[  OK  ] Found device /dev/ttyMSM0.
[   12.484094] Console: switching to colour frame buffer device 240x67
[   12.484253] msm_hdmi_hdcp_read_validate_aksv: AKSV QFPROM doesn't have 20 1's, 20 0's
[   12.484256] msm_hdmi_hdcp_read_validate_aksv: QFPROM AKSV chk failed (AKSV=0800000000)
[   12.484257] msm_hdmi_hdcp_auth_prepare: ASKV validation failed
[   12.484258] msm_hdmi_hdcp_auth_work: auth prepare failed -524
[   12.484260] msm_hdmi_hdcp_auth_work: hdcp is not supported
[   12.563176] msm 900000.mdss: fb0: msm frame buffer device
[   12.596388] iommu: Adding device q6asm-dai to group 4
[   12.596453] q6asm-dai q6asm-dai: Linked as a consumer to 1600000.arm,smmu-lpass_q6
[   12.596566] msm-snd-apq8096 sound: bound q6asm-dai (ops q6asm_dai_comp_ops [q6asm_dai])
[   12.596586] msm-snd-apq8096 sound: bound q6afe-dai (ops q6afe_dai_comp_ops [q6afe_dai])
[   12.596601] msm-snd-apq8096 sound: bound q6routing (ops q6routing_dai_comp_ops [q6routing])
[   12.596680] msm-snd-apq8096 sound: error getting codec dai name
[   12.596682] msm-snd-apq8096 sound: Error parsing OF data
[   12.596699] msm-snd-apq8096 sound: master bind failed: -517
[   12.612405] msm-snd-apq8096 sound: bound q6asm-dai (ops q6asm_dai_comp_ops [q6asm_dai])
[   12.612427] msm-snd-apq8096 sound: bound q6afe-dai (ops q6afe_dai_comp_ops [q6afe_dai])
[   12.612441] msm-snd-apq8096 sound: bound q6routing (ops q6routing_dai_comp_ops [q6routing])
[   12.612670] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: no source widget found for Playback
[   12.612672] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: Failed to add route Playback -> direct -> TX
[   12.614046] msm-snd-apq8096 sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[   12.614088] msm-snd-apq8096 sound: i2s-hifi <-> HDMI mapping ok
[   12.614148] msm-snd-apq8096 sound: ASoC: no source widget found for MCLK
[   12.614151] msm-snd-apq8096 sound: ASoC: Failed to add route MCLK -> direct -> RX_BIAS
[   12.614154] msm-snd-apq8096 sound: ASoC: no DMI vendor name!
[  OK  ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
[   13.039031] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
[   13.041969] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
[   13.044546] ath10k_pci 0000:01:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[   13.154664] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
         Starting Hostname Service...
[  OK  ] Reached target Sound Card.
         Starting Bluetooth service...
[  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
         Starting Authorization Manager...
         Starting LSB: set CPUFreq kernel parameters...
         Starting RMTFS setup...
[   14.714466] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   14.714612] Bluetooth: BNEP filters: protocol multicast
[   14.719033] Bluetooth: BNEP socket layer initialized
[  OK  ] Started Bluetooth service.
[  OK  ] Started Authorization Manager.
[  OK  ] Started RMTFS setup.
[  OK  ] Started Modem Manager.
[  OK  ] Started Hostname Service.
[  OK  ] Started LSB: set CPUFreq kernel parameters.
         Starting Network Manager Script Dispatcher Service...
         Starting Load/Save RF Kill Switch Status...
[  OK  ] Reached target Bluetooth.
[  OK  ] Started Load/Save RF Kill Switch Status.
[  OK  ] Started Network Manager Script Dispatcher Service.
[  OK  ] Started WPA supplicant.
[  OK  ] Started Login Service.
[   14.963189] IPv6: ADDRCONF(NETDEV_UP): enP2p1s0: link is not ready
[   14.964941] atl1c 0002:01:00.0: atl1c: enP2p1s0 NIC Link is Up<1000 Mbps Full Duplex>
[  OK  ] Started Network Manager.
[  OK  ] Reached target Network.
[   15.003325] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
         Starting OpenBSD Secure Shell server...
         Starting Permit User Sessions...
         Starting /etc/rc.local Compatibility...
[  OK  ] Started Permit User Sessions.
[  OK  ] Started /etc/rc.local Compatibility.
         Starting Simple Desktop Display Manager...
[  OK  ] Started Getty on tty1.
[  OK  ] Started Serial Getty on ttyMSM0.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started Simple Desktop Display Manager.
[  OK  ] Started Disk Manager.
[   15.752978] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
[   15.755963] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
[   15.782521] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Changes.

Debian GNU/Linux buster/sid linaro-alip ttyMSM0

linaro-alip login: root (automatic login)

Last login: Fri Jun 22 11:12:02 UTC 2018 on ttyMSM0
Linux linaro-alip 4.14.0-qcomlt-arm64 #1 SMP PREEMPT Fri Jul 20 11:50:10 UTC 2018 aarch64

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@linaro-alip:~# [   16.612638] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
[   16.615604] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
[   16.641870] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   16.760564] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  361.061977] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  676.072438] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  991.069645] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready

root@linaro-alip:~# sudo shutdown now
         Stopping Authorization Manager...
         Stopping User Manager for UID 0...
[  OK  ] Stopped target Sound Card.
[  OK  ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch.
[  OK  ] Stopped target Timers.
[  OK  ] Stopped Trigger anacron every ¦         Stopping Session 1 of user root.
         Stopping RMTFS setup...
         Stopping LSB: set CPUFreq kernel parameters...
         Stopping System Logging Service...
         Stopping Regular background program processing daemon...
[  OK  ] Stopped Initialize hardware monitoring sensors.
         Stopping OpenBSD Secure Shell server...
         Stopping Modem Manager...
[  OK  ] Stopped target Login Prompts.
         Stopping Serial Getty on ttyMSM0...
[  OK  ] Stopped Daily Cleanup of Temporary Directories.
[  OK  ] Stopped Daily rotation of log files.
[  OK  ] Stopped target System Time Synchronized.
         Stopping Getty on tty1...
[  OK  ] Stopped Modem Manager.
[  OK  ] Stopped System Logging Service.
[  OK  ] Stopped Disk Manager.
[  OK  ] Stopped Regular background program processing daemon.
[  OK  ] Stopped Bluetooth service.
[  OK  ] Stopped Authorization Manager.
[  OK  ] Stopped RMTFS setup.
[  OK  ] Stopped Getty on tty1.
[  OK  ] Stopped Serial Getty on ttyMSM0.
[  OK  ] Stopped Simple Desktop Display Manager.
[  OK  ] Stopped OpenBSD Secure Shell server.
[  OK  ] Stopped User Manager for UID 0.
[  OK  ] Stopped Session 1 of user root.
         Stopping /run/user/0 mount wrapper...
[  OK  ] Removed slice User Slice of UID 0.
         Stopping Login Service...
[  OK  ] Removed slice system-serial\x2dgetty.slice.
[  OK  ] Removed slice system-getty.slice.
[  OK  ] Stopped /etc/rc.local Compatibility.
         Stopping Permit User Sessions...
         Stopping QRTR service...
[  OK  ] Unmounted /run/user/0.
[  OK  ] Stopped LSB: set CPUFreq kernel parameters.
[  OK  ] Stopped /run/user/0 mount wrapper.
[  OK  ] Stopped Permit User Sessions.
[  OK  ] Stopped QRTR service.
[  OK  ] Stopped target Network.
         Stopping WPA supplicant...
         Stopping Network Manager...
         Stopping Raise network interfaces...
[  OK  ] Removed slice system-user\x2druntime\x2ddir.slice.
         Stopping LSB: Load kernel modules needed to enable cpufreq scaling...
[  OK  ] Reached target Unmount All Filesystems.
[  OK  ] Stopped LSB: Load kernel modules needed to enable cpufreq scaling.
[  OK  ] Stopped target Remote File Systems.
[  OK  ] Stopped Login Service.
[  OK  ] Stopped Raise network interfaces.
[  OK  ] Stopped WPA supplicant.
[  OK  ] Stopped Network Manager.
         Stopping D-Bus System Message Bus...
[  OK  ] Stopped D-Bus System Message Bus.
[  OK  ] Stopped target Basic System.
[  OK  ] Stopped target Paths.
[  OK  ] Stopped target Sockets.
[  OK  ] Closed GPS (Global Positioning System) Daemon Sockets.
[  OK  ] Closed Syslog Socket.
[  OK  ] Stopped target Slices.
[  OK  ] Removed slice User and Session Slice.
[  OK  ] Closed D-Bus System Message Bus Socket.
[  OK  ] Stopped target System Initialization.
         Stopping Network Time Synchronization...
         Stopping Load/Save Random Seed...
[  OK  ] Stopped target Local Encrypted Volumes.
[  OK  ] Stopped Dispatch Password Requests to Console Directory Watch.
[  OK  ] Stopped Forward Password Requests to Wall Directory Watch.
         Stopping Update UTMP about System Boot/Shutdown...
[  OK  ] Stopped Apply Kernel Variables.
[  OK  ] Stopped target Swap.
[  OK  ] Stopped Load Kernel Modules.
[  OK  ] Stopped Network Time Synchronization.
[  OK  ] Stopped Load/Save Random Seed.
[  OK  ] Stopped Update UTMP about System Boot/Shutdown.
[  OK  ] Stopped Create Volatile Files and Directories.
[  OK  ] Stopped target Local File Systems.
[  OK  ] Stopped target Local File Systems (Pre).
[  OK  ] Stopped Create Static Device Nodes in /dev.
[  OK  ] Stopped Create System Users.
[  OK  ] Stopped Remount Root and Kernel File Systems.
[  OK  ] Reached target Shutdown.
[  OK  ] Reached target Final Step.
         Starting Power-Off...
[ 1304.408781] systemd-journald[1764]: Received SIGTERM from PID 1 (systemd-shutdow).
[ 1304.505536] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 1304.541318] arm-smmu b40000.arm,smmu: removing device with active domains!
[ 1304.541657] sd 0:0:0:5: [sdf] Synchronizing SCSI cache
[ 1304.547957] sd 0:0:0:4: [sde] Synchronizing SCSI cache
[ 1304.553195] sd 0:0:0:3: [sdd] Synchronizing SCSI cache
[ 1304.558164] sd 0:0:0:2: [sdc] Synchronizing SCSI cache
[ 1304.563365] sd 0:0:0:1: [sdb] Synchronizing SCSI cache
[ 1304.568358] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1304.643671] arm-smmu d40000.arm,smmu-venus: removing device with active domains!
[ 1304.644136] arm-smmu 1600000.arm,smmu-lpass_q6: removing device with active domains!
[ 1304.650712] arm-smmu d00000.arm,smmu: removing device with active domains!
[ 1304.658063] arm-smmu da0000.arm,smmu: removing device with active domains!
[ 1304.701437] reboot: Power down