SHARE
TWEET

Untitled

a guest Jul 18th, 2010 107 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1.         [    0.000000] Initializing cgroup subsys cpuset
  2. [    0.000000] Initializing cgroup subsys cpu
  3. [    0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
  4. [    0.000000] KERNEL supported cpus:
  5. [    0.000000]   Intel GenuineIntel
  6. [    0.000000]   AMD AuthenticAMD
  7. [    0.000000]   NSC Geode by NSC
  8. [    0.000000]   Cyrix CyrixInstead
  9. [    0.000000]   Centaur CentaurHauls
  10. [    0.000000]   Transmeta GenuineTMx86
  11. [    0.000000]   Transmeta TransmetaCPU
  12. [    0.000000]   UMC UMC UMC UMC
  13. [    0.000000] BIOS-provided physical RAM map:
  14. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
  15. [    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
  16. [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  17. [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
  18. [    0.000000]  BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
  19. [    0.000000]  BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
  20. [    0.000000]  BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
  21. [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  22. [    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
  23. [    0.000000] DMI 2.2 present.
  24. [    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
  25. [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
  26. [    0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x100000
  27. [    0.000000] MTRR default type: uncachable
  28. [    0.000000] MTRR fixed ranges enabled:
  29. [    0.000000]   00000-9FFFF write-back
  30. [    0.000000]   A0000-BFFFF uncachable
  31. [    0.000000]   C0000-CEFFF write-protect
  32. [    0.000000]   CF000-EFFFF uncachable
  33. [    0.000000]   F0000-FFFFF write-through
  34. [    0.000000] MTRR variable ranges enabled:
  35. [    0.000000]   0 base 000000000 mask F80000000 write-back
  36. [    0.000000]   1 base 080000000 mask FC0000000 write-back
  37. [    0.000000]   2 base 0BFF00000 mask FFFF00000 uncachable
  38. [    0.000000]   3 disabled
  39. [    0.000000]   4 disabled
  40. [    0.000000]   5 disabled
  41. [    0.000000]   6 disabled
  42. [    0.000000]   7 disabled
  43. [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  44. [    0.000000] Scanning 0 areas for low memory corruption
  45. [    0.000000] modified physical RAM map:
  46. [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
  47. [    0.000000]  modified: 0000000000010000 - 000000000009f400 (usable)
  48. [    0.000000]  modified: 000000000009f400 - 00000000000a0000 (reserved)
  49. [    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
  50. [    0.000000]  modified: 0000000000100000 - 00000000bfee0000 (usable)
  51. [    0.000000]  modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
  52. [    0.000000]  modified: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
  53. [    0.000000]  modified: 00000000bfef0000 - 00000000bff00000 (reserved)
  54. [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
  55. [    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
  56. [    0.000000] initial memory mapped : 0 - 00c00000
  57. [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
  58. [    0.000000] Using x86 segment limits to approximate NX protection
  59. [    0.000000]  0000000000 - 0000400000 page 4k
  60. [    0.000000]  0000400000 - 0037400000 page 2M
  61. [    0.000000]  0037400000 - 00377fe000 page 4k
  62. [    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
  63. [    0.000000] RAMDISK: 7f6ca000 - 7ffff0cd
  64. [    0.000000] Allocated new RAMDISK: 008de000 - 012130cd
  65. [    0.000000] Move RAMDISK from 000000007f6ca000 - 000000007ffff0cc to 008de000 - 012130cc
  66. [    0.000000] ACPI: RSDP 000f76b0 00014 (v00 IntelR)
  67. [    0.000000] ACPI: RSDT bfee3040 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
  68. [    0.000000] ACPI: FACP bfee30c0 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
  69. [    0.000000] ACPI: DSDT bfee3180 04BFD (v01 INTELR AWRDACPI 00001000 MSFT 03000000)
  70. [    0.000000] ACPI: FACS bfee0000 00040
  71. [    0.000000] ACPI: MCFG bfee7ec0 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
  72. [    0.000000] ACPI: APIC bfee7dc0 00084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
  73. [    0.000000] ACPI: SSDT bfee7f40 0015C (v01  PmRef  Cpu0Ist 00003000 INTL 20041203)
  74. [    0.000000] ACPI: SSDT bfee83d0 002F1 (v01  PmRef    CpuPm 00003000 INTL 20041203)
  75. [    0.000000] ACPI: Local APIC address 0xfee00000
  76. [    0.000000] 2182MB HIGHMEM available.
  77. [    0.000000] 887MB LOWMEM available.
  78. [    0.000000]   mapped low ram: 0 - 377fe000
  79. [    0.000000]   low ram: 0 - 377fe000
  80. [    0.000000]   node 0 low ram: 00000000 - 377fe000
  81. [    0.000000]   node 0 bootmap 00011000 - 00017f00
  82. [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  83. [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  84. [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  85. [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  86. [    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
  87. [    0.000000]   #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
  88. [    0.000000]   #5 [00008da000 - 00008dd0c6]              BRK ==> [00008da000 - 00008dd0c6]
  89. [    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
  90. [    0.000000]   #7 [00008de000 - 00012130cd]      NEW RAMDISK ==> [00008de000 - 00012130cd]
  91. [    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
  92. [    0.000000] found SMP MP-table at [c00f3510] f3510
  93. [    0.000000] Zone PFN ranges:
  94. [    0.000000]   DMA      0x00000010 -> 0x00001000
  95. [    0.000000]   Normal   0x00001000 -> 0x000377fe
  96. [    0.000000]   HighMem  0x000377fe -> 0x000bfee0
  97. [    0.000000] Movable zone start PFN for each node
  98. [    0.000000] early_node_map[2] active PFN ranges
  99. [    0.000000]     0: 0x00000010 -> 0x0000009f
  100. [    0.000000]     0: 0x00000100 -> 0x000bfee0
  101. [    0.000000] On node 0 totalpages: 786031
  102. [    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1215200
  103. [    0.000000]   DMA zone: 32 pages used for memmap
  104. [    0.000000]   DMA zone: 0 pages reserved
  105. [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
  106. [    0.000000]   Normal zone: 1744 pages used for memmap
  107. [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
  108. [    0.000000]   HighMem zone: 4366 pages used for memmap
  109. [    0.000000]   HighMem zone: 554452 pages, LIFO batch:31
  110. [    0.000000] Using APIC driver default
  111. [    0.000000] ACPI: PM-Timer IO Port: 0x408
  112. [    0.000000] ACPI: Local APIC address 0xfee00000
  113. [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  114. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  115. [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
  116. [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
  117. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  118. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  119. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
  120. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
  121. [    0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
  122. [    0.000000] Using ACPI for processor (LAPIC) configuration information
  123. [    0.000000] Intel MultiProcessor Specification v1.4
  124. [    0.000000]     Virtual Wire compatibility mode.
  125. [    0.000000] MPTABLE: OEM ID: OEM00000
  126. [    0.000000] MPTABLE: Product ID: PROD00000000
  127. [    0.000000] MPTABLE: APIC at: 0xFEE00000
  128. [    0.000000] I/O APIC #4 Version 17 at 0xFEC00000.
  129. [    0.000000] Processors: 2
  130. [    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
  131. [    0.000000] nr_irqs_gsi: 24
  132. [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
  133. [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
  134. [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
  135. [    0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000)
  136. [    0.000000] Booting paravirtualized kernel on bare hardware
  137. [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
  138. [    0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36024 r0 d21320 u1048576
  139. [    0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304
  140. [    0.000000] pcpu-alloc: [0] 0 1 2 3
  141. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 779889
  142. [    0.000000] Kernel command line: noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/mint.seed boot=casper xforcevesa initrd=/casper/initrd.lz ramdisk_size=1048576 root=/dev/ram rw noapic noapci nosplash irqpoll -- BOOT_IMAGE=/casper/vmlinuz
  143. [    0.000000] Misrouted IRQ fixup and polling support enabled
  144. [    0.000000] This may significantly impact system performance
  145. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  146. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  147. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  148. [    0.000000] Enabling fast FPU save and restore... done.
  149. [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  150. [    0.000000] Initializing CPU#0
  151. [    0.000000] allocated 15722560 bytes of page_cgroup
  152. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  153. [    0.000000] Initializing HighMem for node 0 (000377fe:000bfee0)
  154. [    0.000000] Memory: 3084436k/3144576k available (4673k kernel code, 58528k reserved, 2122k data, 656k init, 2235272k highmem)
  155. [    0.000000] virtual kernel memory layout:
  156. [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
  157. [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  158. [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
  159. [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
  160. [    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
  161. [    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
  162. [    0.000000]       .text : 0xc0100000 - 0xc0590613   (4673 kB)
  163. [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  164. [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  165. [    0.000000] Hierarchical RCU implementation.
  166. [    0.000000] NR_IRQS:2304 nr_irqs:440
  167. [    0.000000] Console: colour VGA+ 80x25
  168. [    0.000000] console [tty0] enabled
  169. [    0.000000] Fast TSC calibration using PIT
  170. [    0.000000] Detected 1903.982 MHz processor.
  171. [    0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3807.96 BogoMIPS (lpj=7615928)
  172. [    0.008105] Security Framework initialized
  173. [    0.008167] AppArmor: AppArmor initialized
  174. [    0.008215] Mount-cache hash table entries: 512
  175. [    0.008386] Initializing cgroup subsys ns
  176. [    0.008431] Initializing cgroup subsys cpuacct
  177. [    0.008477] Initializing cgroup subsys memory
  178. [    0.008525] Initializing cgroup subsys devices
  179. [    0.008568] Initializing cgroup subsys freezer
  180. [    0.008612] Initializing cgroup subsys net_cls
  181. [    0.008673] CPU: L1 I cache: 32K, L1 D cache: 32K
  182. [    0.008752] CPU: L2 cache: 2048K
  183. [    0.008795] CPU: Physical Processor ID: 0
  184. [    0.008838] CPU: Processor Core ID: 0
  185. [    0.008882] mce: CPU supports 6 MCE banks
  186. [    0.008932] CPU0: Thermal monitoring enabled (TM2)
  187. [    0.008976] using mwait in idle threads.
  188. [    0.009023] Performance Events: Core2 events, Intel PMU driver.
  189. [    0.009144] ... version:                2
  190. [    0.009186] ... bit width:              40
  191. [    0.009229] ... generic registers:      2
  192. [    0.009272] ... value mask:             000000ffffffffff
  193. [    0.009315] ... max period:             000000007fffffff
  194. [    0.009359] ... fixed-purpose events:   3
  195. [    0.009401] ... event mask:             0000000700000003
  196. [    0.009447] Checking 'hlt' instruction... OK.
  197. [    0.026822] ACPI: Core revision 20090903
  198. [    0.033522] ACPI: setting ELCR to 0200 (from 0c20)
  199. [    0.036028] ftrace: converting mcount calls to 0f 1f 44 00 00
  200. [    0.036079] ftrace: allocating 21771 entries in 43 pages
  201. [    0.040058] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  202. [    0.040109] CPU0: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 02
  203. [    0.044001] Booting processor 1 APIC 0x1 ip 0x6000
  204. [    0.012000] Initializing CPU#1
  205. [    0.012000] CPU: L1 I cache: 32K, L1 D cache: 32K
  206. [    0.012000] CPU: L2 cache: 2048K
  207. [    0.012000] CPU: Physical Processor ID: 0
  208. [    0.012000] CPU: Processor Core ID: 1
  209. [    0.012000] CPU1: Thermal monitoring enabled (TM2)
  210. [    0.128099] CPU1: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 02
  211. [    0.129405] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  212. [    0.132015] Brought up 2 CPUs
  213. [    0.132059] Total of 2 processors activated (7616.17 BogoMIPS).
  214. [    0.132512] CPU0 attaching sched-domain:
  215. [    0.132516]  domain 0: span 0-1 level MC
  216. [    0.132518]   groups: 0 1
  217. [    0.132525] CPU1 attaching sched-domain:
  218. [    0.132527]  domain 0: span 0-1 level MC
  219. [    0.132530]   groups: 1 0
  220. [    0.132626] devtmpfs: initialized
  221. [    0.132626] regulator: core version 0.5
  222. [    0.132626] Time:  0:46:51  Date: 07/19/10
  223. [    0.132626] NET: Registered protocol family 16
  224. [    0.132626] Trying to unpack rootfs image as initramfs...
  225. [    0.132626] EISA bus registered
  226. [    0.132626] ACPI: bus type pci registered
  227. [    0.132626] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
  228. [    0.132626] PCI: MCFG area at e0000000 reserved in E820
  229. [    0.132626] PCI: Using MMCONFIG for extended config space
  230. [    0.132626] PCI: Using configuration type 1 for base access
  231. [    0.136102] bio: create slab <bio-0> at 0
  232. [    0.136974] ACPI: EC: Look up EC in DSDT
  233. [    0.143635] ACPI: Interpreter enabled
  234. [    0.143688] ACPI: (supports S0 S3 S4 S5)
  235. [    0.143896] ACPI: Using PIC for interrupt routing
  236. [    0.149369] ACPI: No dock devices found.
  237. [    0.149505] ACPI: PCI Root Bridge [PCI0] (0000:00)
  238. [    0.149660] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
  239. [    0.149706] pci 0000:00:01.0: PME# disabled
  240. [    0.149811] pci 0000:00:1a.0: reg 20 io port: [0xff00-0xff1f]
  241. [    0.149860] pci 0000:00:1a.1: reg 20 io port: [0xfe00-0xfe1f]
  242. [    0.149909] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
  243. [    0.149956] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
  244. [    0.150003] pci 0000:00:1a.7: PME# disabled
  245. [    0.150080] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff]
  246. [    0.150123] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
  247. [    0.150170] pci 0000:00:1b.0: PME# disabled
  248. [    0.150274] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  249. [    0.150320] pci 0000:00:1c.0: PME# disabled
  250. [    0.150427] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
  251. [    0.150473] pci 0000:00:1c.2: PME# disabled
  252. [    0.150580] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
  253. [    0.150626] pci 0000:00:1c.4: PME# disabled
  254. [    0.150732] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
  255. [    0.150778] pci 0000:00:1c.5: PME# disabled
  256. [    0.150865] pci 0000:00:1d.0: reg 20 io port: [0xfd00-0xfd1f]
  257. [    0.150913] pci 0000:00:1d.1: reg 20 io port: [0xfc00-0xfc1f]
  258. [    0.150962] pci 0000:00:1d.2: reg 20 io port: [0xfb00-0xfb1f]
  259. [    0.151012] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdffe000-0xfdffe3ff]
  260. [    0.151059] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  261. [    0.151105] pci 0000:00:1d.7: PME# disabled
  262. [    0.151266] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
  263. [    0.151317] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
  264. [    0.151365] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 000f)
  265. [    0.151461] pci 0000:00:1f.2: reg 10 io port: [0xfa00-0xfa07]
  266. [    0.151467] pci 0000:00:1f.2: reg 14 io port: [0xf900-0xf903]
  267. [    0.151474] pci 0000:00:1f.2: reg 18 io port: [0xf800-0xf807]
  268. [    0.151480] pci 0000:00:1f.2: reg 1c io port: [0xf700-0xf703]
  269. [    0.151486] pci 0000:00:1f.2: reg 20 io port: [0xf600-0xf60f]
  270. [    0.151492] pci 0000:00:1f.2: reg 24 io port: [0xf500-0xf50f]
  271. [    0.151513] pci 0000:00:1f.2: PME# supported from D3hot
  272. [    0.151558] pci 0000:00:1f.2: PME# disabled
  273. [    0.151619] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfdffd000-0xfdffd0ff]
  274. [    0.151637] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
  275. [    0.151676] pci 0000:00:1f.5: reg 10 io port: [0xf300-0xf307]
  276. [    0.151682] pci 0000:00:1f.5: reg 14 io port: [0xf200-0xf203]
  277. [    0.151688] pci 0000:00:1f.5: reg 18 io port: [0xf100-0xf107]
  278. [    0.151695] pci 0000:00:1f.5: reg 1c io port: [0xf000-0xf003]
  279. [    0.151701] pci 0000:00:1f.5: reg 20 io port: [0xef00-0xef0f]
  280. [    0.151707] pci 0000:00:1f.5: reg 24 io port: [0xee00-0xee0f]
  281. [    0.151728] pci 0000:00:1f.5: PME# supported from D3hot
  282. [    0.151773] pci 0000:00:1f.5: PME# disabled
  283. [    0.151850] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
  284. [    0.151860] pci 0000:01:00.0: reg 18 64bit mmio: [0xfd8e0000-0xfd8effff]
  285. [    0.151866] pci 0000:01:00.0: reg 20 io port: [0xce00-0xceff]
  286. [    0.151876] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
  287. [    0.151896] pci 0000:01:00.0: supports D1 D2
  288. [    0.151931] pci 0000:01:00.1: reg 10 64bit mmio: [0xfd8fc000-0xfd8fffff]
  289. [    0.151968] pci 0000:01:00.1: supports D1 D2
  290. [    0.152026] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
  291. [    0.152030] pci 0000:00:01.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff]
  292. [    0.152035] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
  293. [    0.152077] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff]
  294. [    0.152081] pci 0000:00:1c.0: bridge 32bit mmio: [0xfd500000-0xfd5fffff]
  295. [    0.152088] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd400000-0xfd4fffff]
  296. [    0.152146] pci 0000:03:00.0: reg 10 io port: [0xae00-0xaeff]
  297. [    0.152169] pci 0000:03:00.0: reg 18 64bit mmio: [0xfdeff000-0xfdefffff]
  298. [    0.152192] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
  299. [    0.152241] pci 0000:03:00.0: supports D1 D2
  300. [    0.152243] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
  301. [    0.152291] pci 0000:03:00.0: PME# disabled
  302. [    0.152386] pci 0000:00:1c.2: bridge io port: [0xa000-0xafff]
  303. [    0.152391] pci 0000:00:1c.2: bridge 32bit mmio: [0xfde00000-0xfdefffff]
  304. [    0.152397] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
  305. [    0.152456] pci 0000:04:00.0: reg 10 io port: [0x8e00-0x8eff]
  306. [    0.152479] pci 0000:04:00.0: reg 18 64bit mmio: [0xfdcff000-0xfdcfffff]
  307. [    0.152502] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
  308. [    0.152551] pci 0000:04:00.0: supports D1 D2
  309. [    0.152553] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
  310. [    0.152601] pci 0000:04:00.0: PME# disabled
  311. [    0.152696] pci 0000:00:1c.4: bridge io port: [0x8000-0x8fff]
  312. [    0.152701] pci 0000:00:1c.4: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
  313. [    0.152707] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
  314. [    0.152799] pci 0000:05:00.0: reg 24 32bit mmio: [0xfdafe000-0xfdafffff]
  315. [    0.152809] pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
  316. [    0.152842] pci 0000:05:00.0: PME# supported from D3hot
  317. [    0.152889] pci 0000:05:00.0: PME# disabled
  318. [    0.152984] pci 0000:05:00.1: reg 10 io port: [0xdf00-0xdf07]
  319. [    0.152993] pci 0000:05:00.1: reg 14 io port: [0xde00-0xde03]
  320. [    0.153003] pci 0000:05:00.1: reg 18 io port: [0xdd00-0xdd07]
  321. [    0.153013] pci 0000:05:00.1: reg 1c io port: [0xdc00-0xdc03]
  322. [    0.153022] pci 0000:05:00.1: reg 20 io port: [0xdb00-0xdb0f]
  323. [    0.153116] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
  324. [    0.153121] pci 0000:00:1c.5: bridge 32bit mmio: [0xfda00000-0xfdafffff]
  325. [    0.153127] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfd900000-0xfd9fffff]
  326. [    0.153177] pci 0000:00:1e.0: transparent bridge
  327. [    0.153222] pci 0000:00:1e.0: bridge io port: [0x9000-0x9fff]
  328. [    0.153227] pci 0000:00:1e.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff]
  329. [    0.153234] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd600000-0xfd6fffff]
  330. [    0.153259] pci_bus 0000:00: on NUMA node 0
  331. [    0.153264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  332. [    0.153444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
  333. [    0.153516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
  334. [    0.153587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
  335. [    0.153654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
  336. [    0.153736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
  337. [    0.173209] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *5 7 10 11 14 15)
  338. [    0.173678] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 *10 11 14 15)
  339. [    0.174145] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15)
  340. [    0.174614] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 *11 14 15)
  341. [    0.175081] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0, disabled.
  342. [    0.175622] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 *11 14 15)
  343. [    0.176099] ACPI: PCI Interrupt Link [LNK0] (IRQs 4 5 7 *10 11 14 15)
  344. [    0.176566] ACPI: PCI Interrupt Link [LNK1] (IRQs 4 *5 7 10 11 14 15)
  345. [    0.177049] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
  346. [    0.177103] vgaarb: loaded
  347. [    0.177272] SCSI subsystem initialized
  348. [    0.177387] libata version 3.00 loaded.
  349. [    0.177459] usbcore: registered new interface driver usbfs
  350. [    0.177514] usbcore: registered new interface driver hub
  351. [    0.177581] usbcore: registered new device driver usb
  352. [    0.177756] ACPI: WMI: Mapper loaded
  353. [    0.177799] PCI: Using ACPI for IRQ routing
  354. [    0.178021] NetLabel: Initializing
  355. [    0.178063] NetLabel:  domain hash size = 128
  356. [    0.178106] NetLabel:  protocols = UNLABELED CIPSOv4
  357. [    0.178160] NetLabel:  unlabeled traffic allowed by default
  358. [    0.178230] Switching to clocksource tsc
  359. [    2.319185] AppArmor: AppArmor Filesystem Enabled
  360. [    2.319185] pnp: PnP ACPI init
  361. [    2.319185] ACPI: bus type pnp registered
  362. [    2.321479] pnp: PnP ACPI: found 12 devices
  363. [    2.321533] ACPI: ACPI bus type pnp unregistered
  364. [    2.321585] PnPBIOS: Disabled by ACPI PNP
  365. [    2.321658] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
  366. [    2.321710] system 00:01: ioport range 0x880-0x88f has been reserved
  367. [    2.321768] system 00:07: ioport range 0x400-0x4bf could not be reserved
  368. [    2.321824] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
  369. [    2.321875] system 00:0b: iomem range 0xf0000-0xfffff could not be reserved
  370. [    2.321922] system 00:0b: iomem range 0xbff00000-0xbfffffff could not be reserved
  371. [    2.321979] system 00:0b: iomem range 0xbfee0000-0xbfefffff could not be reserved
  372. [    2.322036] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
  373. [    2.322088] system 00:0b: iomem range 0x100000-0xbfedffff could not be reserved
  374. [    2.322145] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
  375. [    2.322195] system 00:0b: iomem range 0xfed14000-0xfed1dfff has been reserved
  376. [    2.322241] system 00:0b: iomem range 0xfed20000-0xfed9ffff has been reserved
  377. [    2.322292] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
  378. [    2.322345] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved
  379. [    2.322425] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
  380. [    2.322478] system 00:0b: iomem range 0xe0000-0xeffff has been reserved
  381. [    2.357330] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
  382. [    2.357384] pci 0000:00:01.0:   IO window: 0xc000-0xcfff
  383. [    2.357437] pci 0000:00:01.0:   MEM window: 0xfd800000-0xfd8fffff
  384. [    2.357486] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
  385. [    2.357544] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
  386. [    2.357597] pci 0000:00:1c.0:   IO window: 0xb000-0xbfff
  387. [    2.357649] pci 0000:00:1c.0:   MEM window: 0xfd500000-0xfd5fffff
  388. [    2.357701] pci 0000:00:1c.0:   PREFETCH window: 0x000000fd400000-0x000000fd4fffff
  389. [    2.357761] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
  390. [    2.357812] pci 0000:00:1c.2:   IO window: 0xa000-0xafff
  391. [    2.357860] pci 0000:00:1c.2:   MEM window: 0xfde00000-0xfdefffff
  392. [    2.357912] pci 0000:00:1c.2:   PREFETCH window: 0x000000fdd00000-0x000000fddfffff
  393. [    2.357969] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
  394. [    2.358018] pci 0000:00:1c.4:   IO window: 0x8000-0x8fff
  395. [    2.358068] pci 0000:00:1c.4:   MEM window: 0xfdc00000-0xfdcfffff
  396. [    2.358119] pci 0000:00:1c.4:   PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
  397. [    2.358178] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05
  398. [    2.358225] pci 0000:00:1c.5:   IO window: 0xd000-0xdfff
  399. [    2.358276] pci 0000:00:1c.5:   MEM window: 0xfda00000-0xfdafffff
  400. [    2.358326] pci 0000:00:1c.5:   PREFETCH window: 0x000000fd900000-0x000000fd9fffff
  401. [    2.358402] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
  402. [    2.358450] pci 0000:00:1e.0:   IO window: 0x9000-0x9fff
  403. [    2.358504] pci 0000:00:1e.0:   MEM window: 0xfd700000-0xfd7fffff
  404. [    2.358554] pci 0000:00:1e.0:   PREFETCH window: 0x000000fd600000-0x000000fd6fffff
  405. [    2.358820] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
  406. [    2.358874] PCI: setting IRQ 5 as level-triggered
  407. [    2.358881] pci 0000:00:01.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
  408. [    2.358938] pci 0000:00:01.0: setting latency timer to 64
  409. [    2.358950] pci 0000:00:1c.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
  410. [    2.359008] pci 0000:00:1c.0: setting latency timer to 64
  411. [    2.359153] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
  412. [    2.359205] PCI: setting IRQ 11 as level-triggered
  413. [    2.359210] pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  414. [    2.359269] pci 0000:00:1c.2: setting latency timer to 64
  415. [    2.359279] pci 0000:00:1c.4: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
  416. [    2.359341] pci 0000:00:1c.4: setting latency timer to 64
  417. [    2.359486] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
  418. [    2.359536] PCI: setting IRQ 10 as level-triggered
  419. [    2.359541] pci 0000:00:1c.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
  420. [    2.359603] pci 0000:00:1c.5: setting latency timer to 64
  421. [    2.359610] pci 0000:00:1e.0: enabling device (0000 -> 0003)
  422. [    2.359666] pci 0000:00:1e.0: setting latency timer to 64
  423. [    2.359672] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
  424. [    2.359675] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
  425. [    2.359678] pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
  426. [    2.359681] pci_bus 0000:01: resource 1 mem: [0xfd800000-0xfd8fffff]
  427. [    2.359684] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
  428. [    2.359687] pci_bus 0000:02: resource 0 io:  [0xb000-0xbfff]
  429. [    2.359690] pci_bus 0000:02: resource 1 mem: [0xfd500000-0xfd5fffff]
  430. [    2.359693] pci_bus 0000:02: resource 2 pref mem [0xfd400000-0xfd4fffff]
  431. [    2.359696] pci_bus 0000:03: resource 0 io:  [0xa000-0xafff]
  432. [    2.359699] pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfdefffff]
  433. [    2.359702] pci_bus 0000:03: resource 2 pref mem [0xfdd00000-0xfddfffff]
  434. [    2.359705] pci_bus 0000:04: resource 0 io:  [0x8000-0x8fff]
  435. [    2.359707] pci_bus 0000:04: resource 1 mem: [0xfdc00000-0xfdcfffff]
  436. [    2.359710] pci_bus 0000:04: resource 2 pref mem [0xfdb00000-0xfdbfffff]
  437. [    2.359713] pci_bus 0000:05: resource 0 io:  [0xd000-0xdfff]
  438. [    2.359716] pci_bus 0000:05: resource 1 mem: [0xfda00000-0xfdafffff]
  439. [    2.359718] pci_bus 0000:05: resource 2 pref mem [0xfd900000-0xfd9fffff]
  440. [    2.359722] pci_bus 0000:06: resource 0 io:  [0x9000-0x9fff]
  441. [    2.359724] pci_bus 0000:06: resource 1 mem: [0xfd700000-0xfd7fffff]
  442. [    2.359727] pci_bus 0000:06: resource 2 pref mem [0xfd600000-0xfd6fffff]
  443. [    2.359730] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
  444. [    2.359733] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
  445. [    2.359788] NET: Registered protocol family 2
  446. [    2.359963] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  447. [    2.360373] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  448. [    2.361052] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  449. [    2.361483] TCP: Hash tables configured (established 131072 bind 65536)
  450. [    2.361531] TCP reno registered
  451. [    2.361697] NET: Registered protocol family 1
  452. [    2.361894] pci 0000:01:00.0: Boot video device
  453. [    2.362117] cpufreq-nforce2: No nForce2 chipset.
  454. [    2.362189] Scanning for low memory corruption every 60 seconds
  455. [    2.362350] audit: initializing netlink socket (disabled)
  456. [    2.362432] type=2000 audit(1279500413.360:1): initialized
  457. [    2.371963] Freeing initrd memory: 9428k freed
  458. [    2.376131] highmem bounce pool size: 64 pages
  459. [    2.376182] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  460. [    2.377899] VFS: Disk quotas dquot_6.5.2
  461. [    2.378004] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  462. [    2.378685] fuse init (API version 7.13)
  463. [    2.378817] msgmni has been set to 1679
  464. [    2.379083] alg: No test for stdrng (krng)
  465. [    2.379180] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  466. [    2.379230] io scheduler noop registered
  467. [    2.379272] io scheduler anticipatory registered
  468. [    2.379315] io scheduler deadline registered
  469. [    2.379397] io scheduler cfq registered (default)
  470. [    2.379602]   alloc irq_desc for 24 on node -1
  471. [    2.379604]   alloc kstat_irqs on node -1
  472. [    2.379614] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
  473. [    2.379621] pcieport 0000:00:01.0: setting latency timer to 64
  474. [    2.379720]   alloc irq_desc for 25 on node -1
  475. [    2.379722]   alloc kstat_irqs on node -1
  476. [    2.379729] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
  477. [    2.379737] pcieport 0000:00:1c.0: setting latency timer to 64
  478. [    2.379851]   alloc irq_desc for 26 on node -1
  479. [    2.379853]   alloc kstat_irqs on node -1
  480. [    2.379860] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
  481. [    2.379868] pcieport 0000:00:1c.2: setting latency timer to 64
  482. [    2.379982]   alloc irq_desc for 27 on node -1
  483. [    2.379984]   alloc kstat_irqs on node -1
  484. [    2.379991] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
  485. [    2.379999] pcieport 0000:00:1c.4: setting latency timer to 64
  486. [    2.380116]   alloc irq_desc for 28 on node -1
  487. [    2.380118]   alloc kstat_irqs on node -1
  488. [    2.380125] pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X
  489. [    2.380133] pcieport 0000:00:1c.5: setting latency timer to 64
  490. [    2.380224] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  491. [    2.380411] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  492. [    2.380551] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  493. [    2.380602] ACPI: Power Button [PWRB]
  494. [    2.380704] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
  495. [    2.380753] ACPI: Power Button [PWRF]
  496. [    2.382092] processor LNXCPU:00: registered as cooling_device0
  497. [    2.382345] ACPI: SSDT bfee8340 00087 (v01  PmRef  Cpu1Ist 00003000 INTL 20041203)
  498. [    2.382701] processor LNXCPU:01: registered as cooling_device1
  499. [    2.387038] thermal LNXTHERM:01: registered as thermal_zone0
  500. [    2.387089] ACPI: Thermal Zone [THRM] (20 C)
  501. [    2.387212] isapnp: Scanning for PnP cards...
  502. [    2.388602] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  503. [    2.390090] brd: module loaded
  504. [    2.390653] loop: module loaded
  505. [    2.390777] input: Macintosh mouse button emulation as /devices/virtual/input/input2
  506. [    2.390907] ata_piix 0000:00:1f.2: version 2.13
  507. [    2.391061] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
  508. [    2.391107] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
  509. [    2.391160] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
  510. [    2.391416] ata_piix 0000:00:1f.2: setting latency timer to 64
  511. [    2.391476] scsi0 : ata_piix
  512. [    2.391589] scsi1 : ata_piix
  513. [    2.392420] ata1: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 11
  514. [    2.392470] ata2: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 11
  515. [    2.392534] ata_piix 0000:00:1f.5: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
  516. [    2.392587] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
  517. [    2.392842] ata_piix 0000:00:1f.5: setting latency timer to 64
  518. [    2.392920] scsi2 : ata_piix
  519. [    2.393039] scsi3 : ata_piix
  520. [    2.393389] ata3: SATA max UDMA/133 cmd 0xf300 ctl 0xf200 bmdma 0xef00 irq 11
  521. [    2.393436] ata4: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xef08 irq 11
  522. [    2.393549] pata_acpi 0000:05:00.1: enabling device (0000 -> 0001)
  523. [    2.393597] pata_acpi 0000:05:00.1: PCI INT B -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
  524. [    2.393673] pata_acpi 0000:05:00.1: setting latency timer to 64
  525. [    2.393687] pata_acpi 0000:05:00.1: PCI INT B disabled
  526. [    2.394053] Fixed MDIO Bus: probed
  527. [    2.394133] PPP generic driver version 2.4.2
  528. [    2.394211] tun: Universal TUN/TAP device driver, 1.6
  529. [    2.394254] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  530. [    2.394398] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  531. [    2.394458] ehci_hcd 0000:00:1a.7: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  532. [    2.394516] ehci_hcd 0000:00:1a.7: setting latency timer to 64
  533. [    2.394520] ehci_hcd 0000:00:1a.7: EHCI Host Controller
  534. [    2.394595] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
  535. [    2.398549] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
  536. [    2.398573] ehci_hcd 0000:00:1a.7: irq 11, io mem 0xfdfff000
  537. [    2.414369] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
  538. [    2.414499] usb usb1: configuration #1 chosen from 1 choice
  539. [    2.414575] hub 1-0:1.0: USB hub found
  540. [    2.414623] hub 1-0:1.0: 4 ports detected
  541. [    2.414853] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
  542. [    2.414899] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5
  543. [    2.414955] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  544. [    2.414959] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  545. [    2.415034] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
  546. [    2.418998] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  547. [    2.419005] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xfdffe000
  548. [    2.434372] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  549. [    2.434490] usb usb2: configuration #1 chosen from 1 choice
  550. [    2.434560] hub 2-0:1.0: USB hub found
  551. [    2.434607] hub 2-0:1.0: 6 ports detected
  552. [    2.434705] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  553. [    2.434763] uhci_hcd: USB Universal Host Controller Interface driver
  554. [    2.434826] uhci_hcd 0000:00:1a.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
  555. [    2.434879] uhci_hcd 0000:00:1a.0: setting latency timer to 64
  556. [    2.434883] uhci_hcd 0000:00:1a.0: UHCI Host Controller
  557. [    2.434956] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
  558. [    2.435025] uhci_hcd 0000:00:1a.0: irq 5, io base 0x0000ff00
  559. [    2.435158] usb usb3: configuration #1 chosen from 1 choice
  560. [    2.435227] hub 3-0:1.0: USB hub found
  561. [    2.435274] hub 3-0:1.0: 2 ports detected
  562. [    2.435491] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
  563. [    2.435538] uhci_hcd 0000:00:1a.1: PCI INT B -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11
  564. [    2.435592] uhci_hcd 0000:00:1a.1: setting latency timer to 64
  565. [    2.435596] uhci_hcd 0000:00:1a.1: UHCI Host Controller
  566. [    2.435672] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
  567. [    2.435743] uhci_hcd 0000:00:1a.1: irq 11, io base 0x0000fe00
  568. [    2.435880] usb usb4: configuration #1 chosen from 1 choice
  569. [    2.435951] hub 4-0:1.0: USB hub found
  570. [    2.435999] hub 4-0:1.0: 2 ports detected
  571. [    2.436087] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5
  572. [    2.436141] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  573. [    2.436145] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  574. [    2.436224] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
  575. [    2.436292] uhci_hcd 0000:00:1d.0: irq 5, io base 0x0000fd00
  576. [    2.436425] usb usb5: configuration #1 chosen from 1 choice
  577. [    2.436494] hub 5-0:1.0: USB hub found
  578. [    2.436541] hub 5-0:1.0: 2 ports detected
  579. [    2.436624] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
  580. [    2.436677] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  581. [    2.436680] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  582. [    2.436759] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
  583. [    2.436827] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000fc00
  584. [    2.436957] usb usb6: configuration #1 chosen from 1 choice
  585. [    2.437026] hub 6-0:1.0: USB hub found
  586. [    2.437074] hub 6-0:1.0: 2 ports detected
  587. [    2.437160] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  588. [    2.437213] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  589. [    2.437216] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  590. [    2.437294] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
  591. [    2.437362] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000fb00
  592. [    2.437491] usb usb7: configuration #1 chosen from 1 choice
  593. [    2.437560] hub 7-0:1.0: USB hub found
  594. [    2.437607] hub 7-0:1.0: 2 ports detected
  595. [    2.437745] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  596. [    2.437789] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  597. [    2.438422] serio: i8042 KBD port at 0x60,0x64 irq 1
  598. [    2.438540] mice: PS/2 mouse device common for all mice
  599. [    2.438686] rtc_cmos 00:03: RTC can wake from S4
  600. [    2.438763] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  601. [    2.438823] rtc0: alarms up to one month, 242 bytes nvram
  602. [    2.438967] device-mapper: uevent: version 1.0.3
  603. [    2.439100] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
  604. [    2.439209] device-mapper: multipath: version 1.1.0 loaded
  605. [    2.439253] device-mapper: multipath round-robin: version 1.0.0 loaded
  606. [    2.439406] EISA: Probing bus 0 at eisa.0
  607. [    2.439470] Cannot allocate resource for EISA slot 8
  608. [    2.439514] EISA: Detected 0 cards.
  609. [    2.439623] cpuidle: using governor ladder
  610. [    2.439666] cpuidle: using governor menu
  611. [    2.440176] TCP cubic registered
  612. [    2.440383] NET: Registered protocol family 10
  613. [    2.440926] lo: Disabled Privacy Extensions
  614. [    2.441338] NET: Registered protocol family 17
  615. [    2.443302] Using IPI No-Shortcut mode
  616. [    2.443476] PM: Resume from disk failed.
  617. [    2.443492] registered taskstats version 1
  618. [    2.444006]   Magic number: 2:665:759
  619. [    2.444118] rtc_cmos 00:03: setting system clock to 2010-07-19 00:46:54 UTC (1279500414)
  620. [    2.444168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  621. [    2.444212] EDD information not available.
  622. [    2.461294] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  623. [    2.742521] isapnp: No Plug & Play device found
  624. [    2.747496] ata3: SATA link down (SStatus 0 SControl 300)
  625. [    2.758084] ata4: SATA link down (SStatus 0 SControl 300)
  626. [    2.781104] usb 1-1: new high speed USB device using ehci_hcd and address 2
  627. [    2.916007] usb 1-1: configuration #1 chosen from 1 choice
  628. [    3.027574] usb 1-2: new high speed USB device using ehci_hcd and address 3
  629. [    3.152877] usb 1-2: configuration #1 chosen from 1 choice
  630. [    3.192122] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  631. [    3.192179] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  632. [    3.192402] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  633. [    3.192457] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  634. [    3.208435] ata1.00: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
  635. [    3.208504] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
  636. [    3.208637] ata2.00: ATA-7: SAMSUNG HD753LJ, 1AA01109, max UDMA7
  637. [    3.208682] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  638. [    3.208846] ata1.01: ATA-8: ST31000528AS, CC38, max UDMA/133
  639. [    3.208912] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
  640. [    3.209041] ata2.01: ATA-7: SAMSUNG HD401LJ, ZZ100-15, max UDMA7
  641. [    3.209086] ata2.01: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
  642. [    3.224409] ata1.00: configured for UDMA/133
  643. [    3.224682] ata2.00: configured for UDMA/133
  644. [    3.232596] ata1.01: configured for UDMA/133
  645. [    3.232679] ata2.01: configured for UDMA/133
  646. [    3.232767] scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
  647. [    3.232954] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
  648. [    3.232974] sd 0:0:0:0: Attached scsi generic sg0 type 0
  649. [    3.233095] scsi 0:0:1:0: Direct-Access     ATA      ST31000528AS     CC38 PQ: 0 ANSI: 5
  650. [    3.233113] sd 0:0:0:0: [sda] Write Protect is off
  651. [    3.233116] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  652. [    3.233142] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  653. [    3.233279]  sda:
  654. [    3.233345] sd 0:0:1:0: Attached scsi generic sg1 type 0
  655. [    3.233549] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD753LJ  1AA0 PQ: 0 ANSI: 5
  656. [    3.233715] sd 1:0:0:0: Attached scsi generic sg2 type 0
  657. [    3.233726] sd 1:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
  658. [    3.233771] sd 1:0:0:0: [sdc] Write Protect is off
  659. [    3.233774] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  660. [    3.233797] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  661. [    3.233923]  sdc: sdc1
  662. [    3.240632] scsi 1:0:1:0: Direct-Access     ATA      SAMSUNG HD401LJ  ZZ10 PQ: 0 ANSI: 5
  663. [    3.240764] sd 1:0:1:0: Attached scsi generic sg3 type 0
  664. [    3.241686]  <
  665. [    3.241745] sd 1:0:1:0: [sdd] 781422768 512-byte logical blocks: (400 GB/372 GiB)
  666. [    3.248521]  sdc5 >
  667. [    3.248612] sd 1:0:1:0: [sdd] Write Protect is off
  668. [    3.248615] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00
  669. [    3.248645] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  670. [    3.248745]
  671. [    3.248820] sd 0:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
  672. [    3.248898]  sdd:
  673. [    3.248918] sd 0:0:1:0: [sdb] Write Protect is off
  674. [    3.248921] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
  675. [    3.248946] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  676. [    3.249131]  sda1 sda2 sda3 < sdd1 < sdd5 >
  677. [    3.257069] sd 1:0:1:0: [sdd] Attached SCSI disk
  678. [    3.257183] sd 1:0:0:0: [sdc] Attached SCSI disk
  679. [    3.262979]  sda5 >
  680. [    3.263276]  sdb: sdb1
  681. [    3.286171] sd 0:0:0:0: [sda] Attached SCSI disk
  682. [    3.286428] sd 0:0:1:0: [sdb] Attached SCSI disk
  683. [    3.286487] Freeing unused kernel memory: 656k freed
  684. [    3.286811] Write protecting the kernel text: 4676k
  685. [    3.286899] Write protecting the kernel read-only data: 1840k
  686. [    3.308370] udev: starting version 151
  687. [    3.320032] usb 2-1: new high speed USB device using ehci_hcd and address 2
  688. [    3.354304] vga16fb: initializing
  689. [    3.354308] vga16fb: mapped to 0xc00a0000
  690. [    3.354415] fb0: VGA16 VGA frame buffer device
  691. [    3.420753] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  692. [    3.420819] r8169 0000:03:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  693. [    3.420913] r8169 0000:03:00.0: setting latency timer to 64
  694. [    3.420973]   alloc irq_desc for 29 on node -1
  695. [    3.420975]   alloc kstat_irqs on node -1
  696. [    3.420990] r8169 0000:03:00.0: irq 29 for MSI/MSI-X
  697. [    3.421687] eth0: RTL8168b/8111b at 0xf8060000, 00:50:8d:95:56:36, XID 18000000 IRQ 29
  698. [    3.423128] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  699. [    3.423185] r8169 0000:04:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
  700. [    3.423273] r8169 0000:04:00.0: setting latency timer to 64
  701. [    3.423334]   alloc irq_desc for 30 on node -1
  702. [    3.423336]   alloc kstat_irqs on node -1
  703. [    3.423348] r8169 0000:04:00.0: irq 30 for MSI/MSI-X
  704. [    3.424063] eth1: RTL8168b/8111b at 0xf80aa000, 00:50:8d:95:56:37, XID 18000000 IRQ 30
  705. [    3.436759] pata_jmicron 0000:05:00.1: PCI INT B -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
  706. [    3.436795] pata_jmicron 0000:05:00.1: setting latency timer to 64
  707. [    3.439817] scsi4 : pata_jmicron
  708. [    3.439962] scsi5 : pata_jmicron
  709. [    3.440068] ata5: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 5
  710. [    3.440071] ata6: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 5
  711. [    3.447630] Linux agpgart interface v0.103
  712. [    3.447696] ahci 0000:05:00.0: version 3.0
  713. [    3.447717] ahci 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
  714. [    3.452481] Initializing USB Mass Storage driver...
  715. [    3.453556] scsi6 : SCSI emulation for USB Mass Storage devices
  716. [    3.453702] usbcore: registered new interface driver usb-storage
  717. [    3.453704] USB Mass Storage support registered.
  718. [    3.453798] usb-storage: device found at 2
  719. [    3.453799] usb-storage: waiting for device to settle before scanning
  720. [    3.460689] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
  721. [    3.460693] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
  722. [    3.460700] ahci 0000:05:00.0: setting latency timer to 64
  723. [    3.460867] scsi7 : ahci
  724. [    3.461017] scsi8 : ahci
  725. [    3.461126] ata7: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 11
  726. [    3.461130] ata8: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 11
  727. [    3.471449] usb 2-1: configuration #1 chosen from 1 choice
  728. [    3.473067] scsi9 : SCSI emulation for USB Mass Storage devices
  729. [    3.473381] usb-storage: device found at 2
  730. [    3.473383] usb-storage: waiting for device to settle before scanning
  731. [    3.555583] Console: switching to colour frame buffer device 80x30
  732. [    3.588062] usb 2-3: new high speed USB device using ehci_hcd and address 3
  733. [    3.628574] ata5.00: ATAPI: LITE-ON DVDRW LH-20A1P, KL0P, max UDMA/66
  734. [    3.630400] ata5.01: ATA-7: Maxtor 6L200P0, BAH41G10, max UDMA/133
  735. [    3.630569] ata5.01: 398297088 sectors, multi 0: LBA48
  736. [    3.660598] ata5.00: configured for UDMA/66
  737. [    3.678308] ata5.01: configured for UDMA/100
  738. [    3.682154] scsi 4:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1P   KL0P PQ: 0 ANSI: 5
  739. [    3.690870] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
  740. [    3.697488] Uniform CD-ROM driver Revision: 3.20
  741. [    3.701500] sr 4:0:0:0: Attached scsi CD-ROM sr0
  742. [    3.701567] sr 4:0:0:0: Attached scsi generic sg4 type 5
  743. [    3.705774] scsi 4:0:1:0: Direct-Access     ATA      Maxtor 6L200P0   BAH4 PQ: 0 ANSI: 5
  744. [    3.715045] sd 4:0:1:0: [sde] 398297088 512-byte logical blocks: (203 GB/189 GiB)
  745. [    3.716623] sd 4:0:1:0: Attached scsi generic sg5 type 0
  746. [    3.732580] sd 4:0:1:0: [sde] Write Protect is off
  747. [    3.738970] sd 4:0:1:0: [sde] Mode Sense: 00 3a 00 00
  748. [    3.738998] sd 4:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  749. [    3.752661]  sde:
  750. [    3.753436] usb 2-3: configuration #1 chosen from 1 choice
  751. [    3.768649] hub 2-3:1.0: USB hub found
  752. [    3.770333]  sde1 <
  753. [    3.776860] hub 2-3:1.0: 4 ports detected
  754. [    3.777348]  sde5 >
  755. [    3.801182] ata7: SATA link down (SStatus 0 SControl 300)
  756. [    3.801839] sd 4:0:1:0: [sde] Attached SCSI disk
  757. [    3.801882] ata8: SATA link down (SStatus 0 SControl 300)
  758. [    4.029289] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  759. [    4.038120] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  760. [    4.040015] usb 4-2: new low speed USB device using uhci_hcd and address 2
  761. [    4.055572] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  762. [    4.064303] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  763. [    4.074195] end_request: I/O error, dev sr0, sector 0
  764. [    4.082975] Buffer I/O error on device sr0, logical block 0
  765. [    4.093211] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  766. [    4.101781] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  767. [    4.110236] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  768. [    4.118390] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  769. [    4.127666] end_request: I/O error, dev sr0, sector 0
  770. [    4.135735] Buffer I/O error on device sr0, logical block 0
  771. [    4.154278] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  772. [    4.162080] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  773. [    4.169752] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  774. [    4.177116] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  775. [    4.185521] end_request: I/O error, dev sr0, sector 0
  776. [    4.192764] Buffer I/O error on device sr0, logical block 0
  777. [    4.201626] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  778. [    4.208703] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  779. [    4.214941] usb 4-2: configuration #1 chosen from 1 choice
  780. [    4.222994] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  781. [    4.229510] usbcore: registered new interface driver hiddev
  782. [    4.237147] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  783. [    4.245799] end_request: I/O error, dev sr0, sector 0
  784. [    4.253155] Buffer I/O error on device sr0, logical block 0
  785. [    4.255119] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
  786. [    4.255211] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1a.1-2/input0
  787. [    4.255232] usbcore: registered new interface driver usbhid
  788. [    4.255235] usbhid: v2.6:USB HID core driver
  789. [    4.292261] usb 2-3.4: new full speed USB device using ehci_hcd and address 4
  790. [    4.315025] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  791. [    4.322760] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  792. [    4.330596] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  793. [    4.338455] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  794. [    4.347510] end_request: I/O error, dev sr0, sector 0
  795. [    4.355287] Buffer I/O error on device sr0, logical block 0
  796. [    4.387209] usb 2-3.4: configuration #1 chosen from 1 choice
  797. [    4.396765] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.4/2-3.4:1.0/input/input5
  798. [    4.400036] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  799. [    4.400040] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  800. [    4.400043] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  801. [    4.400048] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  802. [    4.400055] end_request: I/O error, dev sr0, sector 0
  803. [    4.400057] Buffer I/O error on device sr0, logical block 0
  804. [    4.401912] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  805. [    4.401915] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  806. [    4.401919] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  807. [    4.401923] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  808. [    4.401929] end_request: I/O error, dev sr0, sector 0
  809. [    4.401931] Buffer I/O error on device sr0, logical block 0
  810. [    4.403757] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  811. [    4.403760] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  812. [    4.403763] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  813. [    4.403767] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  814. [    4.403773] end_request: I/O error, dev sr0, sector 0
  815. [    4.403775] Buffer I/O error on device sr0, logical block 0
  816. [    4.405706] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  817. [    4.405709] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  818. [    4.405713] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  819. [    4.405717] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  820. [    4.405723] end_request: I/O error, dev sr0, sector 0
  821. [    4.405725] Buffer I/O error on device sr0, logical block 0
  822. [    4.407765] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  823. [    4.407768] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  824. [    4.407771] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  825. [    4.407776] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  826. [    4.407782] end_request: I/O error, dev sr0, sector 0
  827. [    4.409678] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  828. [    4.409681] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  829. [    4.409684] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  830. [    4.409689] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  831. [    4.409695] end_request: I/O error, dev sr0, sector 0
  832. [    4.411515] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  833. [    4.411518] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  834. [    4.411522] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  835. [    4.411526] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  836. [    4.411532] end_request: I/O error, dev sr0, sector 0
  837. [    4.413380] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  838. [    4.413383] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  839. [    4.413386] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  840. [    4.413391] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  841. [    4.413397] end_request: I/O error, dev sr0, sector 0
  842. [    4.415220] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  843. [    4.415223] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  844. [    4.415226] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  845. [    4.415230] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  846. [    4.415236] end_request: I/O error, dev sr0, sector 0
  847. [    4.417061] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  848. [    4.417064] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  849. [    4.417067] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  850. [    4.417071] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  851. [    4.417077] end_request: I/O error, dev sr0, sector 0
  852. [    4.418902] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  853. [    4.418905] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  854. [    4.418908] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  855. [    4.418912] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  856. [    4.418918] end_request: I/O error, dev sr0, sector 0
  857. [    4.420716] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  858. [    4.420719] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  859. [    4.420722] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  860. [    4.420726] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  861. [    4.420732] end_request: I/O error, dev sr0, sector 0
  862. [    4.422557] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  863. [    4.422560] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  864. [    4.422563] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  865. [    4.422567] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  866. [    4.422573] end_request: I/O error, dev sr0, sector 0
  867. [    4.424376] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  868. [    4.424379] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  869. [    4.424382] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  870. [    4.424386] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  871. [    4.424392] end_request: I/O error, dev sr0, sector 0
  872. [    4.426181] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  873. [    4.426184] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  874. [    4.426188] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  875. [    4.426192] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  876. [    4.426198] end_request: I/O error, dev sr0, sector 0
  877. [    4.428034] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  878. [    4.428037] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  879. [    4.428040] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  880. [    4.428044] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  881. [    4.428050] end_request: I/O error, dev sr0, sector 0
  882. [    4.429837] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  883. [    4.429840] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  884. [    4.429843] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  885. [    4.429847] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  886. [    4.429853] end_request: I/O error, dev sr0, sector 0
  887. [    4.431680] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  888. [    4.431683] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  889. [    4.431686] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  890. [    4.431691] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  891. [    4.431697] end_request: I/O error, dev sr0, sector 0
  892. [    4.433465] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  893. [    4.433469] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  894. [    4.433472] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  895. [    4.433476] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  896. [    4.433482] end_request: I/O error, dev sr0, sector 0
  897. [    4.435294] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  898. [    4.435297] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  899. [    4.435300] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  900. [    4.435305] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  901. [    4.435311] end_request: I/O error, dev sr0, sector 0
  902. [    4.437113] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  903. [    4.437116] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  904. [    4.437119] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  905. [    4.437123] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  906. [    4.437129] end_request: I/O error, dev sr0, sector 0
  907. [    4.439038] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  908. [    4.439041] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  909. [    4.439044] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  910. [    4.439048] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  911. [    4.439054] end_request: I/O error, dev sr0, sector 0
  912. [    4.462188] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  913. [    4.462191] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  914. [    4.462194] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  915. [    4.462198] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  916. [    4.462204] end_request: I/O error, dev sr0, sector 0
  917. [    4.479554] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  918. [    4.479557] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  919. [    4.479560] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  920. [    4.479564] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  921. [    4.479570] end_request: I/O error, dev sr0, sector 0
  922. [    5.321421] generic-usb 0003:046D:C52B.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-3.4/input0
  923. [    5.322310] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  924. [    5.322314] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  925. [    5.322317] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  926. [    5.322322] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  927. [    5.322328] end_request: I/O error, dev sr0, sector 0
  928. [    5.323958] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  929. [    5.323961] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  930. [    5.323964] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  931. [    5.323969] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  932. [    5.323975] end_request: I/O error, dev sr0, sector 0
  933. [    5.325674] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  934. [    5.325677] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  935. [    5.325680] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  936. [    5.325684] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  937. [    5.325690] end_request: I/O error, dev sr0, sector 0
  938. [    5.327424] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  939. [    5.327427] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  940. [    5.327430] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  941. [    5.327434] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  942. [    5.327440] end_request: I/O error, dev sr0, sector 0
  943. [    5.329039] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  944. [    5.329042] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  945. [    5.329045] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  946. [    5.329049] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  947. [    5.329055] end_request: I/O error, dev sr0, sector 0
  948. [    5.330630] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  949. [    5.330633] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  950. [    5.330636] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  951. [    5.330641] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  952. [    5.330646] end_request: I/O error, dev sr0, sector 0
  953. [    5.332260] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  954. [    5.332263] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  955. [    5.332266] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  956. [    5.332270] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  957. [    5.332276] end_request: I/O error, dev sr0, sector 0
  958. [    5.333866] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  959. [    5.333869] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  960. [    5.333872] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  961. [    5.333876] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  962. [    5.333882] end_request: I/O error, dev sr0, sector 0
  963. [    5.335490] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  964. [    5.335493] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  965. [    5.335496] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  966. [    5.335500] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  967. [    5.335506] end_request: I/O error, dev sr0, sector 0
  968. [    5.337088] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  969. [    5.337091] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  970. [    5.337094] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  971. [    5.337099] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  972. [    5.337104] end_request: I/O error, dev sr0, sector 0
  973. [    5.338681] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  974. [    5.338684] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  975. [    5.338687] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  976. [    5.338691] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  977. [    5.338698] end_request: I/O error, dev sr0, sector 0
  978. [    5.340277] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  979. [    5.340280] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  980. [    5.340283] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  981. [    5.340287] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  982. [    5.340293] end_request: I/O error, dev sr0, sector 0
  983. [    5.341893] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  984. [    5.341896] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  985. [    5.341899] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  986. [    5.341903] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  987. [    5.341909] end_request: I/O error, dev sr0, sector 0
  988. [    5.343531] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  989. [    5.343534] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  990. [    5.343537] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  991. [    5.343541] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  992. [    5.343547] end_request: I/O error, dev sr0, sector 0
  993. [    5.345116] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  994. [    5.345119] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  995. [    5.345122] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  996. [    5.345126] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  997. [    5.345132] end_request: I/O error, dev sr0, sector 0
  998. [    5.347001] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  999. [    5.347004] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1000. [    5.347007] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  1001. [    5.347011] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  1002. [    5.347017] end_request: I/O error, dev sr0, sector 0
  1003. [    5.348626] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1004. [    5.348629] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1005. [    5.348632] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  1006. [    5.348636] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  1007. [    5.348642] end_request: I/O error, dev sr0, sector 0
  1008. [    5.350257] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1009. [    5.350260] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1010. [    5.350263] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  1011. [    5.350267] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  1012. [    5.350273] end_request: I/O error, dev sr0, sector 0
  1013. [    5.351842] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1014. [    5.351845] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1015. [    5.351848] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  1016. [    5.351852] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  1017. [    5.351858] end_request: I/O error, dev sr0, sector 0
  1018. [    5.353458] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1019. [    5.353461] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1020. [    5.353464] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  1021. [    5.353468] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  1022. [    5.353474] end_request: I/O error, dev sr0, sector 0
  1023. [    5.355079] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1024. [    5.355082] sr 4:0:0:0: [sr0] Sense Key : Illegal Request [current]
  1025. [    5.355085] sr 4:0:0:0: [sr0] Add. Sense: Logical block address out of range
  1026. [    5.355090] sr 4:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00
  1027. [    5.355095] end_request: I/O error, dev sr0, sector 0
  1028. [    6.108633] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.4/2-3.4:1.1/input/input6
  1029. [    6.123637] generic-usb 0003:046D:C52B.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-3.4/input1
  1030. [    6.141882] generic-usb 0003:046D:C52B.0004: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.7-3.4/input2
  1031. [    6.379331] xor: automatically using best checksumming function: pIII_sse
  1032. [    6.395997]    pIII_sse  :  6769.000 MB/sec
  1033. [    6.396000] xor: using function: pIII_sse (6769.000 MB/sec)
  1034. [    6.398805] device-mapper: dm-raid45: initialized v0.2594b
  1035. [    8.452647] usb-storage: device scan complete
  1036. [    8.464106] scsi 6:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
  1037. [    8.464572] sd 6:0:0:0: Attached scsi generic sg6 type 0
  1038. [    8.465503] sd 6:0:0:0: [sdf] 15874048 512-byte logical blocks: (8.12 GB/7.56 GiB)
  1039. [    8.465998] sd 6:0:0:0: [sdf] Write Protect is off
  1040. [    8.466002] sd 6:0:0:0: [sdf] Mode Sense: 23 00 00 00
  1041. [    8.466006] sd 6:0:0:0: [sdf] Assuming drive cache: write through
  1042. [    8.467998] sd 6:0:0:0: [sdf] Assuming drive cache: write through
  1043. [    8.468004]  sdf: sdf1
  1044. [    8.472779] usb-storage: device scan complete
  1045. [    8.473124] sd 6:0:0:0: [sdf] Assuming drive cache: write through
  1046. [    8.473128] sd 6:0:0:0: [sdf] Attached SCSI removable disk
  1047. [    8.508072] scsi 9:0:0:0: Direct-Access     Maxtor   3200             0344 PQ: 0 ANSI: 4
  1048. [    8.508630] sd 9:0:0:0: Attached scsi generic sg7 type 0
  1049. [    8.509682] sd 9:0:0:0: [sdg] 976773168 512-byte logical blocks: (500 GB/465 GiB)
  1050. [    8.510648] sd 9:0:0:0: [sdg] Write Protect is off
  1051. [    8.510652] sd 9:0:0:0: [sdg] Mode Sense: 17 00 00 00
  1052. [    8.510656] sd 9:0:0:0: [sdg] Assuming drive cache: write through
  1053. [    8.512427] sd 9:0:0:0: [sdg] Assuming drive cache: write through
  1054. [    8.512431]  sdg: sdg1
  1055. [    8.519166] sd 9:0:0:0: [sdg] Assuming drive cache: write through
  1056. [    8.519171] sd 9:0:0:0: [sdg] Attached SCSI disk
  1057. [   10.926810] aufs 2-standalone.tree-20091207
  1058. [   10.940663] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  1059. [   16.349074] kjournald starting.  Commit interval 5 seconds
  1060. [   16.349085] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
  1061. [   16.349101] EXT3 FS on loop1, internal journal
  1062. [   16.349105] EXT3-fs: recovery complete.
  1063. [   16.349117] EXT3-fs: mounted filesystem with ordered data mode.
  1064. [   16.359718] aufs test_add:243:exe[1137]: uid/gid/perm //filesystem.squashfs 0/0/0755, 1000/1000/0755
  1065. [   38.771561] udev: starting version 151
  1066. [   39.107792] cfg80211: Calling CRDA to update world regulatory domain
  1067. [   39.369382] usb 1-2: reset high speed USB device using ehci_hcd and address 3
  1068. [   39.383869] cfg80211: World regulatory domain updated:
  1069. [   39.383872]  (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  1070. [   39.383876]  (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1071. [   39.383879]  (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  1072. [   39.383882]  (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  1073. [   39.383885]  (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1074. [   39.383887]  (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1075. [   39.654946] phy0: Selected rate control algorithm 'minstrel'
  1076. [   39.655785] zd1211rw 1-2:1.0: phy0
  1077. [   39.655820] usbcore: registered new interface driver zd1211rw
  1078. [   39.668269] usb 1-2: firmware: requesting zd1211/zd1211b_ub
  1079. [   39.797918] usb 1-2: firmware: requesting zd1211/zd1211b_uphr
  1080. [   39.821197] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 10
  1081. [   39.821202] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNK0] -> GSI 10 (level, low) -> IRQ 10
  1082. [   39.821229] HDA Intel 0000:00:1b.0: setting latency timer to 64
  1083. [   39.923466] hda_codec: ALC882: BIOS auto-probing.
  1084. [   39.925273] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
  1085. [   39.954582] HDA Intel 0000:01:00.1: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
  1086. [   39.954612] HDA Intel 0000:01:00.1: setting latency timer to 64
  1087. [   39.955922] zd1211rw 1-2:1.0: firmware version 4725
  1088. [   39.995827] zd1211rw 1-2:1.0: zd1211b chip 0411:00da v4810 high 00-16-01 AL2230S_RF pa0 g--N-
  1089. [   39.998642] cfg80211: Calling CRDA for country: US
  1090. [   40.002345] cfg80211: Regulatory domain changed to country: US
  1091. [   40.002349]  (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  1092. [   40.002352]  (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  1093. [   40.002355]  (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  1094. [   40.002358]  (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1095. [   40.002360]  (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1096. [   40.002363]  (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  1097. [   40.002366]  (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  1098. [   40.032650] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  1099. [   40.034448] r8169: eth0: link down
  1100. [   40.034737] ADDRCONF(NETDEV_UP): eth0: link is not ready
  1101. [   40.058019] r8169: eth1: link down
  1102. [   40.058217] ADDRCONF(NETDEV_UP): eth1: link is not ready
  1103. [   40.859081] EXT3-fs error (device loop1): ext3_add_entry: bad entry in directory #229438: directory entry across blocks - offset=0, inode=829633991, rec_len=13280, name_len=250
  1104. [   40.890424] EXT3-fs error (device loop1): ext3_add_entry: bad entry in directory #229438: directory entry across blocks - offset=0, inode=829633991, rec_len=13280, name_len=250
  1105. [   40.909587] EXT3-fs error (device loop1): ext3_add_entry: bad entry in directory #229438: directory entry across blocks - offset=0, inode=829633991, rec_len=13280, name_len=250
  1106. [   41.071954] EXT3-fs error (device loop1): ext3_add_entry: bad entry in directory #229438: directory entry across blocks - offset=0, inode=829633991, rec_len=13280, name_len=250
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top