[19712.438747] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19712.438749] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19712.438911] sd 2:0:0:0: [sdb] Write Protect is off
[19712.438913] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19712.439200] sd 2:0:0:0: [sdb] Disabling FUA
[19712.439205] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19712.439558] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19712.478042]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[19712.479757] sd 2:0:0:0: [sdb] Attached SCSI disk
[19712.723878] usb 2-1: USB disconnect, device number 67
[19712.723997] usb 2-1: cmd cmplt err -108
[19712.724002] usb 2-1: cmd cmplt err -108
[19712.724005] usb 2-1: cmd cmplt err -108
[19712.724007] usb 2-1: cmd cmplt err -108
[19712.724009] usb 2-1: cmd cmplt err -108
[19712.724011] usb 2-1: cmd cmplt err -108
[19712.724013] usb 2-1: cmd cmplt err -108
[19712.724018] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19712.724139] sd 2:0:0:0: [sdb] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD
[19712.724142] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 0f a7 80 00 00 08 00
[19712.724149] sd 2:0:0:0: [sdb] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD
[19712.724152] sd 2:0:0:0: [sdb] tag#1 CDB: Read(10) 28 00 00 13 a7 80 00 00 08 00
[19712.724155] sd 2:0:0:0: [sdb] tag#8 uas_zap_pending 0 uas-tag 3 inflight: CMD
[19712.724157] sd 2:0:0:0: [sdb] tag#8 CDB: Read(10) 28 00 09 c4 2d 80 00 00 08 00
[19712.724161] sd 2:0:0:0: [sdb] tag#14 uas_zap_pending 0 uas-tag 4 inflight: CMD
[19712.724163] sd 2:0:0:0: [sdb] tag#14 CDB: Read(10) 28 00 09 d7 9f 80 00 00 08 00
[19712.724166] sd 2:0:0:0: [sdb] tag#2 uas_zap_pending 0 uas-tag 5 inflight: CMD
[19712.724169] sd 2:0:0:0: [sdb] tag#2 CDB: Read(10) 28 00 1d cf 2f 80 00 00 08 00
[19712.724172] sd 2:0:0:0: [sdb] tag#9 uas_zap_pending 0 uas-tag 6 inflight: CMD
[19712.724174] sd 2:0:0:0: [sdb] tag#9 CDB: Read(10) 28 00 1d ab 1f 80 00 00 08 00
[19712.724178] sd 2:0:0:0: [sdb] tag#15 uas_zap_pending 0 uas-tag 7 inflight: CMD
[19712.724180] sd 2:0:0:0: [sdb] tag#15 CDB: Read(10) 28 00 1c 05 cf 80 00 00 08 00
[19712.724209] sd 2:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19712.724212] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 0f a7 80 00 00 08 00
[19712.724215] blk_update_request: I/O error, dev sdb, sector 1025920 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[19712.724234] sd 2:0:0:0: [sdb] tag#1 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19712.724237] sd 2:0:0:0: [sdb] tag#1 CDB: Read(10) 28 00 00 13 a7 80 00 00 08 00
[19712.724239] blk_update_request: I/O error, dev sdb, sector 1288064 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[19712.724252] sd 2:0:0:0: [sdb] tag#8 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19712.724255] sd 2:0:0:0: [sdb] tag#8 CDB: Read(10) 28 00 09 c4 2d 80 00 00 08 00
[19712.724258] blk_update_request: I/O error, dev sdb, sector 163851648 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[19712.724270] blk_update_request: I/O error, dev sdb, sector 1025920 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[19712.724271] sd 2:0:0:0: [sdb] tag#14 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19712.724274] sd 2:0:0:0: [sdb] tag#14 CDB: Read(10) 28 00 09 d7 9f 80 00 00 08 00
[19712.724276] Buffer I/O error on dev sdb1, logical block 127984, async page read
[19712.724278] blk_update_request: I/O error, dev sdb, sector 165126016 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[19712.724284] blk_update_request: I/O error, dev sdb, sector 1288064 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[19712.724287] Buffer I/O error on dev sdb2, logical block 32752, async page read
[19712.724288] sd 2:0:0:0: [sdb] tag#2 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19712.724291] sd 2:0:0:0: [sdb] tag#2 CDB: Read(10) 28 00 1d cf 2f 80 00 00 08 00
[19712.724293] blk_update_request: I/O error, dev sdb, sector 500117376 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[19712.724302] blk_update_request: I/O error, dev sdb, sector 163851648 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[19712.724304] sd 2:0:0:0: [sdb] tag#9 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19712.724306] Buffer I/O error on dev sdb3, logical block 162563456, async page read
[19712.724309] blk_update_request: I/O error, dev sdb, sector 163851649 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0
[19712.724310] sd 2:0:0:0: [sdb] tag#9 CDB: Read(10) 28 00 1d ab 1f 80 00 00 08 00
[19712.724312] blk_update_request: I/O error, dev sdb, sector 497753984 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[19712.724315] Buffer I/O error on dev sdb3, logical block 162563457, async page read
[19712.724317] Buffer I/O error on dev sdb3, logical block 162563458, async page read
[19712.724322] Buffer I/O error on dev sdb3, logical block 162563459, async page read
[19712.724323] sd 2:0:0:0: [sdb] tag#15 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19712.724326] Buffer I/O error on dev sdb3, logical block 162563460, async page read
[19712.724327] sd 2:0:0:0: [sdb] tag#15 CDB: Read(10) 28 00 1c 05 cf 80 00 00 08 00
[19712.724329] Buffer I/O error on dev sdb3, logical block 162563461, async page read
[19712.724331] Buffer I/O error on dev sdb3, logical block 162563462, async page read
[19712.724333] Buffer I/O error on dev sdb3, logical block 162563463, async page read
[19712.732145] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[19712.991917] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19714.491598] usb 2-1: Device not responding to setup address.
[19714.703479] usb 2-1: Device not responding to setup address.
[19714.907865] usb 2-1: device not accepting address 68, error -71
[19716.627231] usb 2-1: Device not responding to setup address.
[19716.835512] usb 2-1: Device not responding to setup address.
[19717.039790] usb 2-1: device not accepting address 70, error -71
[19719.731820] usb 2-1: new SuperSpeed Gen 1 USB device number 71 using xhci_hcd
[19719.752825] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19719.752826] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19719.752827] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19719.752828] usb 2-1: Manufacturer: JMicron
[19719.752829] usb 2-1: SerialNumber: 0123456789ABCDEF
[19719.756843] scsi host2: uas
[19719.757547] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19719.758440] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19719.759038] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19719.759040] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19719.759216] sd 2:0:0:0: [sdb] Write Protect is off
[19719.759218] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19719.759538] sd 2:0:0:0: [sdb] Disabling FUA
[19719.759541] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19719.761870] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19719.955692] usb 2-1: USB disconnect, device number 71
[19720.295798] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19720.295804] sd 2:0:0:0: [sdb] Sense not available.
[19720.535837] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19720.535843] sd 2:0:0:0: [sdb] Sense not available.
[19720.635813] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[19720.635818] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19720.847807] sdb: detected capacity change from 256060514304 to 0
[19721.171807] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19721.171813] sd 2:0:0:0: [sdb] Sense not available.
[19721.419817] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19721.419823] sd 2:0:0:0: [sdb] Sense not available.
[19721.723813] sd 2:0:0:0: [sdb] Attached SCSI disk
[19727.103762] usb 2-1: new SuperSpeed Gen 1 USB device number 72 using xhci_hcd
[19727.124602] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19727.124604] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19727.124605] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19727.124606] usb 2-1: Manufacturer: JMicron
[19727.124606] usb 2-1: SerialNumber: 0123456789ABCDEF
[19727.128508] scsi host2: uas
[19727.129051] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19727.130404] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19727.130406] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19727.130566] sd 2:0:0:0: [sdb] Write Protect is off
[19727.130567] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19727.130863] sd 2:0:0:0: [sdb] Disabling FUA
[19727.130865] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19727.131145] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19727.135519] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19727.161134]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[19727.162953] sd 2:0:0:0: [sdb] Attached SCSI disk
[19727.387573] usb 2-1: USB disconnect, device number 72
[19727.388651] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[19727.627581] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19739.567881] usb 2-1: Device not responding to setup address.
[19739.780007] usb 2-1: Device not responding to setup address.
[19739.987340] usb 2-1: device not accepting address 73, error -71
[19742.683637] usb 2-1: Device not responding to setup address.
[19742.895754] usb 2-1: Device not responding to setup address.
[19743.103262] usb 2-1: device not accepting address 74, error -71
[19743.103387] usb usb2-port1: attempt power cycle
[19745.279399] usb 2-1: new SuperSpeed Gen 1 USB device number 75 using xhci_hcd
[19745.300316] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19745.300325] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19745.300329] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19745.300333] usb 2-1: Manufacturer: JMicron
[19745.300336] usb 2-1: SerialNumber: 0123456789ABCDEF
[19745.309077] scsi host2: uas
[19745.311345] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19745.312239] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19745.316148] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19745.316150] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19745.317422] sd 2:0:0:0: [sdb] Write Protect is off
[19745.317424] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19745.317745] sd 2:0:0:0: [sdb] Disabling FUA
[19745.317747] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19745.318011] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19745.361931]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[19745.363479] sd 2:0:0:0: [sdb] Attached SCSI disk
[19745.575111] usb 2-1: USB disconnect, device number 75
[19745.575973] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[19745.815294] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19749.395256] usb 2-1: new SuperSpeed Gen 1 USB device number 77 using xhci_hcd
[19749.419944] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19749.419946] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19749.419947] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19749.419948] usb 2-1: Manufacturer: JMicron
[19749.419949] usb 2-1: SerialNumber: 0123456789ABCDEF
[19749.424778] scsi host2: uas
[19749.425540] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19749.426359] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[19749.427184] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19749.427186] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19749.427354] sd 2:0:0:0: [sdb] Write Protect is off
[19749.427357] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19749.427686] sd 2:0:0:0: [sdb] Disabling FUA
[19749.427689] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19749.427981] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19749.460620]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[19749.651168] usb 2-1: USB disconnect, device number 77
[19749.651393] usb 2-1: cmd cmplt err -108
[19749.651406] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19749.651503] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19749.651525] sd 2:0:0:0: tag#1 uas_zap_pending 0 uas-tag 1 inflight: CMD
[19749.651531] sd 2:0:0:0: tag#1 CDB: Mode Sense(6) 1a 00 08 00 04 00
[19749.651542] sd 2:0:0:0: [sdb] tag#2 uas_zap_pending 0 uas-tag 2 inflight: CMD
[19749.651546] sd 2:0:0:0: [sdb] tag#2 CDB: Inquiry 12 00 00 00 24 00
[19749.707091] sd 2:0:0:0: [sdb] Attached SCSI disk
[19754.119168] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
[19758.471124] usb 2-1: new SuperSpeed Gen 1 USB device number 78 using xhci_hcd
[19758.495785] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19758.495787] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19758.495788] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19758.495789] usb 2-1: Manufacturer: JMicron
[19758.495790] usb 2-1: SerialNumber: 0123456789ABCDEF
[19758.500007] scsi host2: uas
[19758.500915] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19758.501743] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19758.502350] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19758.502352] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19758.502512] sd 2:0:0:0: [sdb] Write Protect is off
[19758.502514] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19758.502820] sd 2:0:0:0: [sdb] Disabling FUA
[19758.502823] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19758.503129] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19758.714870] usb 2-1: USB disconnect, device number 78
[19758.715017] usb 2-1: cmd cmplt err -108
[19758.715026] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19758.715072] sd 2:0:0:0: tag#12 uas_zap_pending 0 uas-tag 1 inflight: CMD
[19758.715076] sd 2:0:0:0: tag#12 CDB: Test Unit Ready 00 00 00 00 00 00
[19758.958980] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19758.958990] sd 2:0:0:0: [sdb] Sense not available.
[19759.203053] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19759.203062] sd 2:0:0:0: [sdb] Sense not available.
[19759.303055] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[19759.303063] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19759.519009] sdb: detected capacity change from 256060514304 to 0
[19759.851093] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19759.851099] sd 2:0:0:0: [sdb] Sense not available.
[19760.099074] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19760.099080] sd 2:0:0:0: [sdb] Sense not available.
[19760.411061] sd 2:0:0:0: [sdb] Attached SCSI disk
[19764.694923] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
[19767.238914] usb 2-1: new SuperSpeed Gen 1 USB device number 79 using xhci_hcd
[19767.260216] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19767.260223] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19767.260228] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19767.260231] usb 2-1: Manufacturer: JMicron
[19767.260234] usb 2-1: SerialNumber: 0123456789ABCDEF
[19767.265894] scsi host2: uas
[19767.266981] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19767.268082] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19767.268713] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19767.268720] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19767.268874] sd 2:0:0:0: [sdb] Write Protect is off
[19767.268878] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19767.269139] sd 2:0:0:0: [sdb] Disabling FUA
[19767.269143] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19767.269442] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19767.300545]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[19767.302539] sd 2:0:0:0: [sdb] Attached SCSI disk
[19767.534742] usb 2-1: USB disconnect, device number 79
[19767.535111] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19767.535148] sd 2:0:0:0: [sdb] tag#8 uas_zap_pending 0 uas-tag 1 inflight: CMD
[19767.535157] sd 2:0:0:0: [sdb] tag#8 CDB: Read(10) 28 00 00 00 02 08 00 01 f8 00
[19767.535275] sd 2:0:0:0: [sdb] tag#8 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19767.535280] sd 2:0:0:0: [sdb] tag#8 CDB: Read(10) 28 00 00 00 02 08 00 01 f8 00
[19767.535283] print_req_error: 5 callbacks suppressed
[19767.535289] blk_update_request: I/O error, dev sdb, sector 520 op 0x0:(READ) flags 0x80700 phys_seg 63 prio class 0
[19767.535403] blk_update_request: I/O error, dev sdb, sector 520 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[19767.535412] buffer_io_error: 4 callbacks suppressed
[19767.535416] Buffer I/O error on dev sdb, logical block 65, async page read
[19767.538588] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[19767.782730] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19772.574782] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
[19790.174360] usb 2-1: Device not responding to setup address.
[19790.386972] usb 2-1: Device not responding to setup address.
[19790.594359] usb 2-1: device not accepting address 81, error -71
[19798.850765] usb 2-1: Device not responding to setup address.
[19799.062632] usb 2-1: Device not responding to setup address.
[19799.270196] usb 2-1: device not accepting address 83, error -71
[19809.582129] usb 2-1: new SuperSpeed Gen 1 USB device number 85 using xhci_hcd
[19809.603191] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19809.603196] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19809.603199] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19809.603201] usb 2-1: Manufacturer: JMicron
[19809.603203] usb 2-1: SerialNumber: 0123456789ABCDEF
[19809.610195] scsi host2: uas
[19809.610891] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19809.611817] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19809.612383] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19809.612388] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19809.612535] sd 2:0:0:0: [sdb] Write Protect is off
[19809.612539] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19809.612804] sd 2:0:0:0: [sdb] Disabling FUA
[19809.612809] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19809.613087] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19809.647550]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[19809.649293] sd 2:0:0:0: [sdb] Attached SCSI disk
[19809.958004] usb 2-1: USB disconnect, device number 85
[19809.959933] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[19809.959960] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[19809.960076] Buffer I/O error on dev sdb5, logical block 0, async page read
[19809.960093] Buffer I/O error on dev sdb5, logical block 0, async page read
[19810.198001] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19811.370606] usb 2-1: Device not responding to setup address.
[19811.581438] usb 2-1: Device not responding to setup address.
[19811.785946] usb 2-1: device not accepting address 86, error -71
[19812.818602] usb 2-1: Device not responding to setup address.
[19813.030480] usb 2-1: Device not responding to setup address.
[19813.237924] usb 2-1: device not accepting address 87, error -71
[19813.238046] usb usb2-port1: attempt power cycle
[19818.201956] usb 2-1: new SuperSpeed Gen 1 USB device number 89 using xhci_hcd
[19818.223108] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19818.223113] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19818.223115] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19818.223118] usb 2-1: Manufacturer: JMicron
[19818.223120] usb 2-1: SerialNumber: 0123456789ABCDEF
[19818.228245] scsi host2: uas
[19818.229012] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19818.229844] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19818.230437] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19818.230439] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19818.230604] sd 2:0:0:0: [sdb] Write Protect is off
[19818.230606] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19818.230926] sd 2:0:0:0: [sdb] Disabling FUA
[19818.230928] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19818.231209] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19818.259255]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[19818.261037] sd 2:0:0:0: [sdb] Attached SCSI disk
[19818.461797] usb 2-1: USB disconnect, device number 89
[19818.462421] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[19818.701873] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19822.242310] usb 2-1: Device not responding to setup address.
[19822.454318] usb 2-1: Device not responding to setup address.
[19822.661748] usb 2-1: device not accepting address 90, error -71
[19822.862435] usb 2-1: Device not responding to setup address.
[19823.074283] usb 2-1: Device not responding to setup address.
[19823.281716] usb 2-1: device not accepting address 91, error -71
[19823.281823] usb usb2-port1: attempt power cycle
[19827.814166] usb 2-1: Device not responding to setup address.
[19828.025319] usb 2-1: Device not responding to setup address.
[19828.229633] usb 2-1: device not accepting address 93, error -71
[19836.514006] usb 2-1: Device not responding to setup address.
[19836.725476] usb 2-1: Device not responding to setup address.
[19836.933444] usb 2-1: device not accepting address 95, error -71
[19837.129604] usb 2-1: new SuperSpeed Gen 1 USB device number 96 using xhci_hcd
[19837.150872] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19837.150876] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19837.150880] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19837.150882] usb 2-1: Manufacturer: JMicron
[19837.150884] usb 2-1: SerialNumber: 0123456789ABCDEF
[19837.155845] scsi host2: uas
[19837.161844] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19837.162618] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19837.163207] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19837.163208] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19837.163373] sd 2:0:0:0: [sdb] Write Protect is off
[19837.163376] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19837.163699] sd 2:0:0:0: [sdb] Disabling FUA
[19837.163704] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19837.163982] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19837.203164]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[19837.393455] usb 2-1: USB disconnect, device number 96
[19837.393610] usb 2-1: cmd cmplt err -108
[19837.393616] usb 2-1: cmd cmplt err -108
[19837.393622] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19837.393741] sd 2:0:0:0: tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD
[19837.393746] sd 2:0:0:0: tag#0 CDB: Test Unit Ready 00 00 00 00 00 00
[19837.393754] sd 2:0:0:0: [sdb] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD
[19837.393757] sd 2:0:0:0: [sdb] tag#1 CDB: Inquiry 12 00 00 00 24 00
[19837.637472] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19837.637476] sd 2:0:0:0: [sdb] Sense not available.
[19837.877516] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19837.877522] sd 2:0:0:0: [sdb] Sense not available.
[19837.973508] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[19837.973514] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19838.181495] sd 2:0:0:0: [sdb] Attached SCSI disk
[19843.709987] usb 2-1: Device not responding to setup address.
[19843.917458] usb 2-1: new SuperSpeed Gen 1 USB device number 98 using xhci_hcd
[19843.938628] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19843.938633] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19843.938636] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19843.938638] usb 2-1: Manufacturer: JMicron
[19843.938640] usb 2-1: SerialNumber: 0123456789ABCDEF
[19843.946013] scsi host2: uas
[19843.947400] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19843.949077] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19843.952256] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19843.952258] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19843.952415] sd 2:0:0:0: [sdb] Write Protect is off
[19843.952417] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19843.952721] sd 2:0:0:0: [sdb] Disabling FUA
[19843.952723] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19843.953012] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19844.149321] usb 2-1: USB disconnect, device number 98
[19844.149502] usb 2-1: cmd cmplt err -108
[19844.149513] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19844.149580] sd 2:0:0:0: tag#9 uas_zap_pending 0 uas-tag 1 inflight: CMD
[19844.149584] sd 2:0:0:0: tag#9 CDB: Test Unit Ready 00 00 00 00 00 00
[19844.389394] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19844.389403] sd 2:0:0:0: [sdb] Sense not available.
[19844.629376] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19844.629382] sd 2:0:0:0: [sdb] Sense not available.
[19844.729365] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[19844.729371] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19844.937374] sdb: detected capacity change from 256060514304 to 0
[19845.257421] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19845.257426] sd 2:0:0:0: [sdb] Sense not available.
[19845.497417] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19845.497422] sd 2:0:0:0: [sdb] Sense not available.
[19845.801398] sd 2:0:0:0: [sdb] Attached SCSI disk
[19850.785708] usb 2-1: Device not responding to setup address.
[19850.997830] usb 2-1: Device not responding to setup address.
[19851.205179] usb 2-1: device not accepting address 99, error -71
[19851.405845] usb 2-1: Device not responding to setup address.
[19851.617682] usb 2-1: Device not responding to setup address.
[19851.825176] usb 2-1: device not accepting address 100, error -71
[19851.825291] usb usb2-port1: attempt power cycle
[19852.757687] usb 2-1: Device not responding to setup address.
[19852.969820] usb 2-1: Device not responding to setup address.
[19853.177150] usb 2-1: device not accepting address 101, error -71
[19853.377819] usb 2-1: Device not responding to setup address.
[19853.589693] usb 2-1: Device not responding to setup address.
[19853.797152] usb 2-1: device not accepting address 102, error -71
[19853.797274] usb usb2-port1: unable to enumerate USB device
[19855.009690] usb 2-1: Device not responding to setup address.
[19855.221683] usb 2-1: Device not responding to setup address.
[19855.429101] usb 2-1: device not accepting address 103, error -71
[19855.629670] usb 2-1: Device not responding to setup address.
[19855.841564] usb 2-1: Device not responding to setup address.
[19856.049089] usb 2-1: device not accepting address 104, error -71
[19856.049211] usb usb2-port1: attempt power cycle
[19861.617133] usb 2-1: new SuperSpeed Gen 1 USB device number 106 using xhci_hcd
[19861.752978] usb 2-1: new SuperSpeed Gen 1 USB device number 106 using xhci_hcd
[19862.089660] usb 2-1: Device not responding to setup address.
[19862.300417] usb 2-1: Device not responding to setup address.
[19862.504967] usb 2-1: device not accepting address 107, error -71
[19862.505081] usb usb2-port1: attempt power cycle
[19865.513041] usb 2-1: new SuperSpeed Gen 1 USB device number 108 using xhci_hcd
[19865.640910] usb 2-1: new SuperSpeed Gen 1 USB device number 108 using xhci_hcd
[19865.969400] usb 2-1: Device not responding to setup address.
[19866.181522] usb 2-1: Device not responding to setup address.
[19866.388889] usb 2-1: device not accepting address 109, error -71
[19866.389008] usb usb2-port1: unable to enumerate USB device
[19867.341002] usb 2-1: new SuperSpeed Gen 1 USB device number 110 using xhci_hcd
[19867.468865] usb 2-1: new SuperSpeed Gen 1 USB device number 110 using xhci_hcd
[19867.797525] usb 2-1: Device not responding to setup address.
[19868.009517] usb 2-1: Device not responding to setup address.
[19868.216852] usb 2-1: device not accepting address 111, error -71
[19868.216966] usb usb2-port1: attempt power cycle
[19871.080977] usb 2-1: new SuperSpeed Gen 1 USB device number 113 using xhci_hcd
[19871.105591] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19871.105596] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19871.105598] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19871.105601] usb 2-1: Manufacturer: JMicron
[19871.105603] usb 2-1: SerialNumber: 0123456789ABCDEF
[19871.110721] scsi host2: uas
[19871.112585] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19871.114138] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19871.114720] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19871.114721] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19871.114881] sd 2:0:0:0: [sdb] Write Protect is off
[19871.114882] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19871.115194] sd 2:0:0:0: [sdb] Disabling FUA
[19871.115196] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19871.115472] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19871.316829] usb 2-1: USB disconnect, device number 113
[19871.664899] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19871.664904] sd 2:0:0:0: [sdb] Sense not available.
[19871.904889] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19871.904894] sd 2:0:0:0: [sdb] Sense not available.
[19872.000876] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[19872.000882] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19872.208869] sdb: detected capacity change from 256060514304 to 0
[19872.528867] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19872.528873] sd 2:0:0:0: [sdb] Sense not available.
[19872.768877] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19872.768882] sd 2:0:0:0: [sdb] Sense not available.
[19873.072829] sd 2:0:0:0: [sdb] Attached SCSI disk
[19877.740191] usb 2-1: Device not responding to setup address.
[19877.949335] usb 2-1: Device not responding to setup address.
[19878.156742] usb 2-1: device not accepting address 114, error -71
[19878.352916] usb 2-1: new SuperSpeed Gen 1 USB device number 115 using xhci_hcd
[19878.374242] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19878.374247] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19878.374250] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19878.374252] usb 2-1: Manufacturer: JMicron
[19878.374254] usb 2-1: SerialNumber: 0123456789ABCDEF
[19878.379221] scsi host2: uas
[19878.379954] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19878.381422] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19878.381936] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19878.381941] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19878.382083] sd 2:0:0:0: [sdb] Write Protect is off
[19878.382088] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19878.382375] sd 2:0:0:0: [sdb] Disabling FUA
[19878.382381] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19878.382698] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19878.418528]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[19878.420459] sd 2:0:0:0: [sdb] Attached SCSI disk
[19878.628751] usb 2-1: USB disconnect, device number 115
[19878.628936] usb 2-1: cmd cmplt err -108
[19878.628945] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19878.629039] sd 2:0:0:0: [sdb] tag#20 uas_zap_pending 0 uas-tag 1 inflight: CMD
[19878.629044] sd 2:0:0:0: [sdb] tag#20 CDB: Inquiry 12 00 00 00 24 00
[19878.630916] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[19878.868804] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19886.301033] usb 2-1: new SuperSpeed Gen 1 USB device number 116 using xhci_hcd
[19886.322350] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19886.322355] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19886.322358] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19886.322360] usb 2-1: Manufacturer: JMicron
[19886.322362] usb 2-1: SerialNumber: 0123456789ABCDEF
[19886.327259] scsi host2: uas
[19886.327989] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19886.329324] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19886.330224] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19886.330227] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19886.330395] sd 2:0:0:0: [sdb] Write Protect is off
[19886.330398] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19886.330694] sd 2:0:0:0: [sdb] Disabling FUA
[19886.330705] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19886.331031] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19886.532880] usb 2-1: USB disconnect, device number 116
[19886.872988] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19886.872993] sd 2:0:0:0: [sdb] Sense not available.
[19887.113006] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19887.113012] sd 2:0:0:0: [sdb] Sense not available.
[19887.209000] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[19887.209005] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19887.416965] sdb: detected capacity change from 256060514304 to 0
[19887.736976] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19887.736982] sd 2:0:0:0: [sdb] Sense not available.
[19887.976963] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19887.976969] sd 2:0:0:0: [sdb] Sense not available.
[19888.280953] sd 2:0:0:0: [sdb] Attached SCSI disk
[19891.201070] usb 2-1: new SuperSpeed Gen 1 USB device number 117 using xhci_hcd
[19891.222237] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19891.222242] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19891.222244] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19891.222247] usb 2-1: Manufacturer: JMicron
[19891.222248] usb 2-1: SerialNumber: 0123456789ABCDEF
[19891.227223] scsi host2: uas
[19891.228065] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19891.229210] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19891.229775] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19891.229781] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19891.229930] sd 2:0:0:0: [sdb] Write Protect is off
[19891.229935] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19891.230213] sd 2:0:0:0: [sdb] Disabling FUA
[19891.230219] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19891.230527] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19891.258446]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[19891.261760] sd 2:0:0:0: [sdb] Attached SCSI disk
[19891.560934] usb 2-1: USB disconnect, device number 117
[19891.561197] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19891.561216] sd 2:0:0:0: [sdb] tag#17 uas_zap_pending 0 uas-tag 1 inflight: CMD
[19891.561222] sd 2:0:0:0: [sdb] tag#17 CDB: Read(10) 28 00 1d ab 2c 00 00 00 08 00
[19891.561232] sd 2:0:0:0: [sdb] tag#21 uas_zap_pending 0 uas-tag 2 inflight: CMD
[19891.561235] sd 2:0:0:0: [sdb] tag#21 CDB: Read(10) 28 00 00 13 a8 48 00 00 30 00
[19891.561240] sd 2:0:0:0: [sdb] tag#2 uas_zap_pending 0 uas-tag 3 inflight: CMD
[19891.561243] sd 2:0:0:0: [sdb] tag#2 CDB: Read(10) 28 00 00 00 08 78 00 00 08 00
[19891.561247] sd 2:0:0:0: [sdb] tag#22 uas_zap_pending 0 uas-tag 4 inflight: CMD
[19891.561250] sd 2:0:0:0: [sdb] tag#22 CDB: Read(10) 28 00 1c 13 e0 80 00 00 08 00
[19891.561254] sd 2:0:0:0: [sdb] tag#23 uas_zap_pending 0 uas-tag 5 inflight: CMD
[19891.561256] sd 2:0:0:0: [sdb] tag#23 CDB: Read(10) 28 00 00 13 a8 10 00 00 08 00
[19891.561260] sd 2:0:0:0: [sdb] tag#1 uas_zap_pending 0 uas-tag 6 inflight: CMD
[19891.561263] sd 2:0:0:0: [sdb] tag#1 CDB: Read(10) 28 00 09 c4 38 00 00 00 08 00
[19891.561267] sd 2:0:0:0: [sdb] tag#18 uas_zap_pending 0 uas-tag 7 inflight: CMD
[19891.561270] sd 2:0:0:0: [sdb] tag#18 CDB: Read(10) 28 00 09 d7 aa 08 00 01 f8 00
[19891.561274] sd 2:0:0:0: [sdb] tag#20 uas_zap_pending 0 uas-tag 8 inflight: CMD
[19891.561277] sd 2:0:0:0: [sdb] tag#20 CDB: Read(10) 28 00 00 13 a8 28 00 00 10 00
[19891.561280] sd 2:0:0:0: [sdb] tag#24 uas_zap_pending 0 uas-tag 9 inflight: CMD
[19891.561283] sd 2:0:0:0: [sdb] tag#24 CDB: Read(10) 28 00 00 13 a8 88 00 00 78 00
[19891.561287] sd 2:0:0:0: [sdb] tag#3 uas_zap_pending 0 uas-tag 10 inflight: CMD
[19891.561290] sd 2:0:0:0: [sdb] tag#3 CDB: Read(10) 28 00 00 0f a8 18 00 00 08 00
[19891.561294] sd 2:0:0:0: [sdb] tag#25 uas_zap_pending 0 uas-tag 11 inflight: CMD
[19891.561297] sd 2:0:0:0: [sdb] tag#25 CDB: Read(10) 28 00 00 13 a9 08 00 00 f8 00
[19891.561346] sd 2:0:0:0: [sdb] tag#17 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19891.561351] sd 2:0:0:0: [sdb] tag#17 CDB: Read(10) 28 00 1d ab 2c 00 00 00 08 00
[19891.561358] blk_update_request: I/O error, dev sdb, sector 497757184 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[19891.561400] sd 2:0:0:0: [sdb] tag#21 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19891.561405] sd 2:0:0:0: [sdb] tag#21 CDB: Read(10) 28 00 00 13 a8 48 00 00 30 00
[19891.561410] blk_update_request: I/O error, dev sdb, sector 1288264 op 0x0:(READ) flags 0x80700 phys_seg 6 prio class 0
[19891.561426] sd 2:0:0:0: [sdb] tag#2 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19891.561429] sd 2:0:0:0: [sdb] tag#2 CDB: Read(10) 28 00 00 00 08 78 00 00 08 00
[19891.561432] blk_update_request: I/O error, dev sdb, sector 2168 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[19891.561447] sd 2:0:0:0: [sdb] tag#22 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19891.561450] sd 2:0:0:0: [sdb] tag#22 CDB: Read(10) 28 00 1c 13 e0 80 00 00 08 00
[19891.561452] blk_update_request: I/O error, dev sdb, sector 471064704 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[19891.561474] sd 2:0:0:0: [sdb] tag#23 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19891.561483] sd 2:0:0:0: [sdb] tag#23 CDB: Read(10) 28 00 00 13 a8 10 00 00 08 00
[19891.561488] blk_update_request: I/O error, dev sdb, sector 1288208 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[19891.561497] blk_update_request: I/O error, dev sdb, sector 497757184 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[19891.561504] Buffer I/O error on dev sdb7, logical block 128, async page read
[19891.561531] blk_update_request: I/O error, dev sdb, sector 2168 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[19891.561536] sd 2:0:0:0: [sdb] tag#1 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19891.561539] Buffer I/O error on dev sdb1, logical block 15, async page read
[19891.561544] sd 2:0:0:0: [sdb] tag#1 CDB: Read(10) 28 00 09 c4 38 00 00 00 08 00
[19891.561549] blk_update_request: I/O error, dev sdb, sector 163854336 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[19891.561554] blk_update_request: I/O error, dev sdb, sector 471064704 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[19891.561559] Buffer I/O error on dev sdb6, logical block 16, async page read
[19891.561580] blk_update_request: I/O error, dev sdb, sector 1288208 op 0x0:(READ) flags 0x0 phys_seg 8 prio class 0
[19891.561628] Buffer I/O error on dev sdb3, logical block 16, async page read
[19891.561635] sd 2:0:0:0: [sdb] tag#18 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19891.561641] Buffer I/O error on dev sdb3, logical block 17, async page read
[19891.561644] sd 2:0:0:0: [sdb] tag#18 CDB: Read(10) 28 00 09 d7 aa 08 00 01 f8 00
[19891.561653] Buffer I/O error on dev sdb3, logical block 18, async page read
[19891.561662] Buffer I/O error on dev sdb3, logical block 19, async page read
[19891.561673] Buffer I/O error on dev sdb3, logical block 20, async page read
[19891.561681] Buffer I/O error on dev sdb3, logical block 21, async page read
[19891.561686] sd 2:0:0:0: [sdb] tag#20 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19891.561692] sd 2:0:0:0: [sdb] tag#20 CDB: Read(10) 28 00 00 13 a8 28 00 00 10 00
[19891.561695] Buffer I/O error on dev sdb3, logical block 22, async page read
[19891.561713] sd 2:0:0:0: [sdb] tag#24 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19891.561723] sd 2:0:0:0: [sdb] tag#24 CDB: Read(10) 28 00 00 13 a8 88 00 00 78 00
[19891.561743] sd 2:0:0:0: [sdb] tag#3 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19891.561752] sd 2:0:0:0: [sdb] tag#3 CDB: Read(10) 28 00 00 0f a8 18 00 00 08 00
[19891.568117] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[19891.804996] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19897.085109] usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
[19903.741079] usb 2-1: new SuperSpeed Gen 1 USB device number 118 using xhci_hcd
[19903.762466] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19903.762470] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19903.762473] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19903.762476] usb 2-1: Manufacturer: JMicron
[19903.762478] usb 2-1: SerialNumber: 0123456789ABCDEF
[19903.767422] scsi host2: uas
[19903.768126] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19903.769801] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19903.769817] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19903.769943] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19903.769965] sd 2:0:0:0: [sdb] Write Protect is off
[19903.769970] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19903.770275] sd 2:0:0:0: [sdb] Disabling FUA
[19903.770282] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19903.770601] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19903.818861]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[19903.820272] sd 2:0:0:0: [sdb] Attached SCSI disk
[19904.121093] usb 2-1: USB disconnect, device number 118
[19904.121308] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19904.121327] sd 2:0:0:0: [sdb] tag#24 uas_zap_pending 0 uas-tag 1 inflight: CMD
[19904.121332] sd 2:0:0:0: [sdb] tag#24 CDB: Read(10) 28 00 00 13 a4 00 00 02 00 00
[19904.121342] sd 2:0:0:0: [sdb] tag#20 uas_zap_pending 0 uas-tag 2 inflight: CMD
[19904.121345] sd 2:0:0:0: [sdb] tag#20 CDB: Read(10) 28 00 1c 73 e0 00 00 00 08 00
[19904.121349] sd 2:0:0:0: [sdb] tag#22 uas_zap_pending 0 uas-tag 3 inflight: CMD
[19904.121352] sd 2:0:0:0: [sdb] tag#22 CDB: Read(10) 28 00 09 d7 9e 00 00 00 f8 00
[19904.121355] sd 2:0:0:0: [sdb] tag#23 uas_zap_pending 0 uas-tag 4 inflight: CMD
[19904.121358] sd 2:0:0:0: [sdb] tag#23 CDB: Read(10) 28 00 09 d7 9f 00 00 00 80 00
[19904.121362] sd 2:0:0:0: [sdb] tag#26 uas_zap_pending 0 uas-tag 5 inflight: CMD
[19904.121364] sd 2:0:0:0: [sdb] tag#26 CDB: Read(10) 28 00 09 d7 9f 88 00 00 68 00
[19904.121410] scsi_io_completion_action: 1 callbacks suppressed
[19904.121417] sd 2:0:0:0: [sdb] tag#24 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19904.121421] sd 2:0:0:0: [sdb] tag#24 CDB: Read(10) 28 00 00 13 a4 00 00 02 00 00
[19904.121423] print_req_error: 6 callbacks suppressed
[19904.121428] blk_update_request: I/O error, dev sdb, sector 1287168 op 0x0:(READ) flags 0x80700 phys_seg 64 prio class 0
[19904.121486] sd 2:0:0:0: [sdb] tag#20 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19904.121489] sd 2:0:0:0: [sdb] tag#20 CDB: Read(10) 28 00 1c 73 e0 00 00 00 08 00
[19904.121493] blk_update_request: I/O error, dev sdb, sector 477356032 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[19904.121514] sd 2:0:0:0: [sdb] tag#22 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19904.121517] sd 2:0:0:0: [sdb] tag#22 CDB: Read(10) 28 00 09 d7 9e 00 00 00 f8 00
[19904.121519] blk_update_request: I/O error, dev sdb, sector 165125632 op 0x0:(READ) flags 0x80700 phys_seg 31 prio class 0
[19904.121556] sd 2:0:0:0: [sdb] tag#23 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19904.121564] sd 2:0:0:0: [sdb] tag#23 CDB: Read(10) 28 00 09 d7 9f 00 00 00 80 00
[19904.121570] blk_update_request: I/O error, dev sdb, sector 165125888 op 0x0:(READ) flags 0x80700 phys_seg 16 prio class 0
[19904.121582] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[19904.121589] sd 2:0:0:0: [sdb] tag#26 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[19904.121594] sd 2:0:0:0: [sdb] tag#26 CDB: Read(10) 28 00 09 d7 9f 88 00 00 68 00
[19904.121599] blk_update_request: I/O error, dev sdb, sector 165126024 op 0x0:(READ) flags 0x80700 phys_seg 13 prio class 0
[19904.121604] blk_update_request: I/O error, dev sdb, sector 1287168 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[19904.121607] buffer_io_error: 12 callbacks suppressed
[19904.121610] Buffer I/O error on dev sdb2, logical block 32640, async page read
[19904.121632] blk_update_request: I/O error, dev sdb, sector 165125632 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[19904.121637] Buffer I/O error on dev sdb4, logical block 159168, async page read
[19904.121647] blk_update_request: I/O error, dev sdb, sector 477356032 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[19904.121654] Buffer I/O error on dev sdb6, logical block 786432, async page read
[19904.121737] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[19904.121778] Buffer I/O error on dev sdb5, logical block 0, async page read
[19904.121815] Buffer I/O error on dev sdb5, logical block 0, async page read
[19904.124912] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[19904.373012] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19909.477294] usb 2-1: new SuperSpeed Gen 1 USB device number 119 using xhci_hcd
[19909.498361] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19909.498362] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19909.498363] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19909.498364] usb 2-1: Manufacturer: JMicron
[19909.498365] usb 2-1: SerialNumber: 0123456789ABCDEF
[19909.502411] scsi host2: uas
[19909.502958] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19909.505326] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19909.693138] usb 2-1: USB disconnect, device number 119
[19909.693328] usb 2-1: cmd cmplt err -108
[19909.693340] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19909.693392] sd 2:0:0:0: tag#24 uas_zap_pending 0 uas-tag 1 inflight: CMD
[19909.693397] sd 2:0:0:0: tag#24 CDB: Test Unit Ready 00 00 00 00 00 00
[19909.937237] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19909.937243] sd 2:0:0:0: [sdb] Sense not available.
[19910.177232] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19910.177239] sd 2:0:0:0: [sdb] Sense not available.
[19910.273234] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[19910.273239] sd 2:0:0:0: [sdb] 0-byte physical blocks
[19910.353181] sd 2:0:0:0: [sdb] Write Protect is off
[19910.353186] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[19910.437270] sd 2:0:0:0: [sdb] Asking for cache data failed
[19910.437278] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[19910.933295] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19910.933301] sd 2:0:0:0: [sdb] Sense not available.
[19911.173190] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19911.173195] sd 2:0:0:0: [sdb] Sense not available.
[19911.577296] sd 2:0:0:0: [sdb] Attached SCSI disk
[19915.305876] usb 2-1: Device not responding to setup address.
[19915.517208] usb 2-1: Device not responding to setup address.
[19915.725222] usb 2-1: device not accepting address 120, error -71
[19921.493680] usb 2-1: Device not responding to setup address.
[19921.705946] usb 2-1: Device not responding to setup address.
[19921.913292] usb 2-1: device not accepting address 122, error -71
[19924.465467] usb 2-1: new SuperSpeed Gen 1 USB device number 124 using xhci_hcd
[19924.486172] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19924.486174] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19924.486176] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19924.486177] usb 2-1: Manufacturer: JMicron
[19924.486178] usb 2-1: SerialNumber: 0123456789ABCDEF
[19924.490679] scsi host2: uas
[19924.685334] usb 2-1: USB disconnect, device number 124
[19924.685533] usb 2-1: cmd cmplt err -108
[19924.685544] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19924.685578] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19924.685700] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19924.685728] scsi 2:0:0:0: tag#8 uas_zap_pending 0 uas-tag 1 inflight: CMD
[19924.685733] scsi 2:0:0:0: tag#8 CDB: Inquiry 12 00 00 00 24 00
[19925.057436] usb 2-1: new SuperSpeed Gen 1 USB device number 125 using xhci_hcd
[19925.082541] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19925.082543] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19925.082544] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19925.082545] usb 2-1: Manufacturer: JMicron
[19925.082546] usb 2-1: SerialNumber: 0123456789ABCDEF
[19925.086792] scsi host2: uas
[19925.269340] usb 2-1: USB disconnect, device number 125
[19925.269615] usb 2-1: cmd cmplt err -108
[19925.269629] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19925.269668] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19925.269737] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19925.269761] scsi 2:0:0:0: tag#24 uas_zap_pending 0 uas-tag 1 inflight: CMD
[19925.269767] scsi 2:0:0:0: tag#24 CDB: Inquiry 12 00 00 00 24 00
[19936.760988] usb 2-1: Device not responding to setup address.
[19936.970139] usb 2-1: Device not responding to setup address.
[19937.177458] usb 2-1: device not accepting address 127, error -71
[19937.377044] usb 2-1: Device not responding to setup address.
[19937.586135] usb 2-1: Device not responding to setup address.
[19937.793453] usb 2-1: device not accepting address 2, error -71
[19937.793579] usb usb2-port1: attempt power cycle
[19938.309187] usb 2-1: Device not responding to setup address.
[19938.517993] usb 2-1: Device not responding to setup address.
[19938.725469] usb 2-1: device not accepting address 3, error -71
[19938.921566] usb 2-1: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[19938.942864] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19938.942870] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19938.942874] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19938.942877] usb 2-1: Manufacturer: JMicron
[19938.942880] usb 2-1: SerialNumber: 0123456789ABCDEF
[19938.948738] scsi host2: uas
[19938.951287] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19938.952480] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19938.953201] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19938.953210] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19938.956718] sd 2:0:0:0: [sdb] Write Protect is off
[19938.956726] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19938.957145] sd 2:0:0:0: [sdb] Disabling FUA
[19938.957157] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19938.957791] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19939.169475] usb 2-1: USB disconnect, device number 4
[19939.501582] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19939.501589] sd 2:0:0:0: [sdb] Sense not available.
[19939.745583] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19939.745589] sd 2:0:0:0: [sdb] Sense not available.
[19939.845570] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[19939.845576] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19940.069582] sdb: detected capacity change from 256060514304 to 0
[19940.389468] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19940.389470] sd 2:0:0:0: [sdb] Sense not available.
[19940.629618] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19940.629626] sd 2:0:0:0: [sdb] Sense not available.
[19940.933613] sd 2:0:0:0: [sdb] Attached SCSI disk
[19942.088963] usb 2-1: Device not responding to setup address.
[19942.296973] usb 2-1: Device not responding to setup address.
[19942.501511] usb 2-1: device not accepting address 5, error -71
[19942.697608] usb 2-1: new SuperSpeed Gen 1 USB device number 6 using xhci_hcd
[19942.825486] usb 2-1: new SuperSpeed Gen 1 USB device number 6 using xhci_hcd
[19942.953592] usb usb2-port1: attempt power cycle
[19948.097699] usb 2-1: new SuperSpeed Gen 1 USB device number 8 using xhci_hcd
[19948.122363] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19948.122365] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19948.122366] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19948.122367] usb 2-1: Manufacturer: JMicron
[19948.122368] usb 2-1: SerialNumber: 0123456789ABCDEF
[19948.127591] scsi host2: uas
[19948.128221] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19948.129365] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19948.130114] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19948.130116] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19948.130278] sd 2:0:0:0: [sdb] Write Protect is off
[19948.130280] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19948.130591] sd 2:0:0:0: [sdb] Disabling FUA
[19948.130594] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19948.130868] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19948.163479]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[19948.165240] sd 2:0:0:0: [sdb] Attached SCSI disk
[19948.357564] usb 2-1: USB disconnect, device number 8
[19948.357761] usb 2-1: cmd cmplt err -108
[19948.357772] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19948.357879] sd 2:0:0:0: [sdb] tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD
[19948.357884] sd 2:0:0:0: [sdb] tag#0 CDB: Inquiry 12 00 00 00 24 00
[19948.359732] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[19948.609607] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19949.033725] usb 2-1: new SuperSpeed Gen 1 USB device number 9 using xhci_hcd
[19949.058713] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19949.058722] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19949.058728] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19949.058732] usb 2-1: Manufacturer: JMicron
[19949.058734] usb 2-1: SerialNumber: 0123456789ABCDEF
[19949.068168] scsi host2: uas
[19949.079972] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19949.081071] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19949.081713] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19949.081719] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19949.081949] sd 2:0:0:0: [sdb] Write Protect is off
[19949.081956] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19949.082284] sd 2:0:0:0: [sdb] Disabling FUA
[19949.082293] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19949.082644] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19949.285447] usb 2-1: USB disconnect, device number 9
[19949.633680] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19949.633686] sd 2:0:0:0: [sdb] Sense not available.
[19949.873679] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19949.873686] sd 2:0:0:0: [sdb] Sense not available.
[19949.973660] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[19949.973666] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19950.181684] sdb: detected capacity change from 256060514304 to 0
[19950.501691] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19950.501697] sd 2:0:0:0: [sdb] Sense not available.
[19950.741698] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19950.741704] sd 2:0:0:0: [sdb] Sense not available.
[19951.045650] sd 2:0:0:0: [sdb] Attached SCSI disk
[19951.705782] usb 2-1: new SuperSpeed Gen 1 USB device number 10 using xhci_hcd
[19951.726484] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19951.726486] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19951.726487] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19951.726488] usb 2-1: Manufacturer: JMicron
[19951.726488] usb 2-1: SerialNumber: 0123456789ABCDEF
[19951.730948] scsi host2: uas
[19951.731472] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19951.734411] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[19951.735409] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19951.735413] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19951.735605] sd 2:0:0:0: [sdb] Write Protect is off
[19951.735608] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19951.735939] sd 2:0:0:0: [sdb] Disabling FUA
[19951.735945] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19951.740018] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19951.767458]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[19951.769114] sd 2:0:0:0: [sdb] Attached SCSI disk
[19952.049580] usb 2-1: USB disconnect, device number 10
[19952.051052] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[19952.289663] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19957.541389] usb 2-1: Device not responding to setup address.
[19957.749281] usb 2-1: Device not responding to setup address.
[19957.953638] usb 2-1: device not accepting address 11, error -71
[19958.153428] usb 2-1: Device not responding to setup address.
[19958.365582] usb 2-1: Device not responding to setup address.
[19958.573653] usb 2-1: device not accepting address 12, error -71
[19958.573788] usb usb2-port1: attempt power cycle
[19959.917809] usb 2-1: new SuperSpeed Gen 1 USB device number 13 using xhci_hcd
[19959.938725] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19959.938727] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19959.938728] usb 2-1: Product: USB to ATA/ATAPI Bridge
[19959.938729] usb 2-1: Manufacturer: JMicron
[19959.938729] usb 2-1: SerialNumber: 0123456789ABCDEF
[19959.942796] scsi host2: uas
[19959.943284] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19959.944361] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19959.944848] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19959.944851] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19959.944988] sd 2:0:0:0: [sdb] Write Protect is off
[19959.944990] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19959.945338] sd 2:0:0:0: [sdb] Disabling FUA
[19959.945340] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19959.945672] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19960.161641] usb 2-1: USB disconnect, device number 13
[19960.161875] usb 2-1: cmd cmplt err -108
[19960.161887] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[19960.161940] sd 2:0:0:0: tag#20 uas_zap_pending 0 uas-tag 1 inflight: CMD
[19960.161945] sd 2:0:0:0: tag#20 CDB: Test Unit Ready 00 00 00 00 00 00
[19960.405734] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19960.405743] sd 2:0:0:0: [sdb] Sense not available.
[19960.645747] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19960.645754] sd 2:0:0:0: [sdb] Sense not available.
[19960.741759] sd 2:0:0:0: [sdb] 0 512-byte logical blocks: (0 B/0 B)
[19960.741767] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19960.949738] sdb: detected capacity change from 256060514304 to 0
[19961.269788] sd 2:0:0:0: [sdb] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19961.269794] sd 2:0:0:0: [sdb] Sense not available.
[19961.513815] sd 2:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[19961.513821] sd 2:0:0:0: [sdb] Sense not available.
[19961.821785] sd 2:0:0:0: [sdb] Attached SCSI disk
[19984.763126] Fin  Trace UAS4 - Port 1
[19992.696855] Début Trace UAS4 - Port 2
[19999.542132] usb 2-2: new SuperSpeed Gen 1 USB device number 14 using xhci_hcd
[19999.566897] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[19999.566899] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[19999.566900] usb 2-2: Product: USB to ATA/ATAPI Bridge
[19999.566901] usb 2-2: Manufacturer: JMicron
[19999.566902] usb 2-2: SerialNumber: 0123456789ABCDEF
[19999.571222] scsi host2: uas
[19999.572043] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[19999.573025] sd 2:0:0:0: Attached scsi generic sg2 type 0
[19999.573623] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[19999.573625] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[19999.573790] sd 2:0:0:0: [sdb] Write Protect is off
[19999.573792] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[19999.574109] sd 2:0:0:0: [sdb] Disabling FUA
[19999.574111] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[19999.574393] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[19999.608038]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[19999.609677] sd 2:0:0:0: [sdb] Attached SCSI disk
[19999.871247] EXT4-fs (sdb5): recovery complete
[19999.871250] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20001.077967] usb 2-2: USB disconnect, device number 14
[20001.078179] usb 2-2: cmd cmplt err -108
[20001.078191] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[20001.078315] sd 2:0:0:0: [sdb] tag#24 uas_zap_pending 0 uas-tag 1 inflight: CMD
[20001.078321] sd 2:0:0:0: [sdb] tag#24 CDB: Read(10) 28 00 01 2c 26 c8 00 00 08 00
[20001.078331] sd 2:0:0:0: [sdb] tag#27 uas_zap_pending 0 uas-tag 2 inflight: CMD
[20001.078334] sd 2:0:0:0: [sdb] tag#27 CDB: Read(10) 28 00 0b 57 ac 08 00 00 f8 00
[20001.078383] sd 2:0:0:0: [sdb] tag#24 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20001.078386] sd 2:0:0:0: [sdb] tag#24 CDB: Read(10) 28 00 01 2c 26 c8 00 00 08 00
[20001.078389] print_req_error: 2 callbacks suppressed
[20001.078394] blk_update_request: I/O error, dev sdb, sector 19670728 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[20001.078439] sd 2:0:0:0: [sdb] tag#27 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20001.078446] sd 2:0:0:0: [sdb] tag#27 CDB: Read(10) 28 00 0b 57 ac 08 00 00 f8 00
[20001.078454] blk_update_request: I/O error, dev sdb, sector 190295048 op 0x0:(READ) flags 0x80700 phys_seg 31 prio class 0
[20001.078484] blk_update_request: I/O error, dev sdb, sector 19670728 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20001.078487] blk_update_request: I/O error, dev sdb, sector 190295056 op 0x0:(READ) flags 0x80000 phys_seg 30 prio class 0
[20001.078498] Buffer I/O error on dev sdb3, logical block 2297817, async page read
[20001.078582] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #788131: block 3145866: comm pool: unable to read itable block
[20001.078657] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20001.078667] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20001.078673] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20001.078699] EXT4-fs (sdb5): I/O error while writing superblock
[20001.079730] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20001.079740] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20001.079757] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20001.079761] Aborting journal on device sdb5-8.
[20001.079784] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20001.079791] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20001.079795] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20001.079806] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20001.080653] blk_update_request: I/O error, dev sdb, sector 251236768 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[20001.101915] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #792997: block 3146170: comm pool: unable to read itable block
[20001.101952] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20001.101965] EXT4-fs (sdb5): I/O error while writing superblock
[20001.102229] Buffer I/O error on dev sdb3, logical block 2297944, async page read
[20001.103293] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #792998: block 3146170: comm pool: unable to read itable block
[20001.103330] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20001.103346] EXT4-fs (sdb5): I/O error while writing superblock
[20001.111093] EXT4-fs error (device sdb5): __ext4_find_entry:1531: inode #786433: comm pool: reading directory lblock 0
[20001.111140] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20001.111605] EXT4-fs (sdb5): I/O error while writing superblock
[20001.111822] EXT4-fs error (device sdb5): __ext4_find_entry:1531: inode #786433: comm pool: reading directory lblock 0
[20001.111884] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20001.111897] EXT4-fs (sdb5): I/O error while writing superblock
[20001.112088] EXT4-fs error (device sdb5): __ext4_find_entry:1531: inode #786433: comm pool: reading directory lblock 0
[20001.112113] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20001.112124] EXT4-fs (sdb5): I/O error while writing superblock
[20001.112270] EXT4-fs error (device sdb5): __ext4_find_entry:1531: inode #786433: comm pool: reading directory lblock 0
[20001.112298] EXT4-fs (sdb5): I/O error while writing superblock
[20001.112445] EXT4-fs error (device sdb5): __ext4_find_entry:1531: inode #786433: comm pool: reading directory lblock 0
[20001.112471] EXT4-fs (sdb5): I/O error while writing superblock
[20001.112608] EXT4-fs error (device sdb5): __ext4_find_entry:1531: inode #786433: comm pool: reading directory lblock 0
[20001.112635] EXT4-fs (sdb5): I/O error while writing superblock
[20001.112810] EXT4-fs error (device sdb5): __ext4_find_entry:1531: inode #786433: comm pool: reading directory lblock 0
[20001.112867] EXT4-fs (sdb5): I/O error while writing superblock
[20001.157417] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20001.397870] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20001.730146] usb 2-2: new SuperSpeed Gen 1 USB device number 15 using xhci_hcd
[20001.751479] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20001.751485] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20001.751488] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20001.751491] usb 2-2: Manufacturer: JMicron
[20001.751494] usb 2-2: SerialNumber: 0123456789ABCDEF
[20001.758835] scsi host2: uas
[20001.760337] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20001.762852] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20001.767247] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20001.767255] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20001.767415] sd 2:0:0:0: [sdb] Write Protect is off
[20001.767421] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20001.767699] sd 2:0:0:0: [sdb] Disabling FUA
[20001.767707] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20001.768015] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20001.797670]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20001.805129] sd 2:0:0:0: [sdb] Attached SCSI disk
[20002.179310] EXT4-fs (sdb5): recovery complete
[20002.179316] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20014.605961] usb 2-2: USB disconnect, device number 15
[20014.608101] print_req_error: 227 callbacks suppressed
[20014.608103] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20014.608106] buffer_io_error: 165 callbacks suppressed
[20014.608108] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20014.608128] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20014.620316] JBD2: Error while async write back metadata bh 0.
[20014.620317] Aborting journal on device sdb5-8.
[20014.620333] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20014.620335] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20014.620337] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20014.620340] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20014.645388] EXT4-fs (sdb5): previous I/O error to superblock detected
[20014.645394] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20014.645396] EXT4-fs (sdb5): I/O error while writing superblock
[20014.650048] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20014.889950] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20015.234043] usb 2-2: new SuperSpeed Gen 1 USB device number 16 using xhci_hcd
[20015.259077] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20015.259082] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20015.259084] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20015.259087] usb 2-2: Manufacturer: JMicron
[20015.259089] usb 2-2: SerialNumber: 0123456789ABCDEF
[20015.266104] scsi host2: uas
[20015.267080] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20015.268102] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[20015.269155] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20015.269161] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20015.269298] sd 2:0:0:0: [sdb] Write Protect is off
[20015.269304] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20015.269645] sd 2:0:0:0: [sdb] Disabling FUA
[20015.269651] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20015.274144] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20015.312184]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20015.315208] sd 2:0:0:0: [sdb] Attached SCSI disk
[20015.523980] EXT4-fs (sdb5): recovery complete
[20015.525873] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20022.558101] usb 2-2: USB disconnect, device number 16
[20022.558314] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[20022.558371] sd 2:0:0:0: [sdb] tag#4 uas_zap_pending 0 uas-tag 1 inflight: CMD
[20022.558376] sd 2:0:0:0: [sdb] tag#4 CDB: Read(10) 28 00 0e 76 ba 98 00 00 20 00
[20022.558385] sd 2:0:0:0: [sdb] tag#17 uas_zap_pending 0 uas-tag 2 inflight: CMD
[20022.558388] sd 2:0:0:0: [sdb] tag#17 CDB: Read(10) 28 00 02 4f 86 38 00 00 20 00
[20022.558392] sd 2:0:0:0: [sdb] tag#18 uas_zap_pending 0 uas-tag 3 inflight: CMD
[20022.558395] sd 2:0:0:0: [sdb] tag#18 CDB: Write(10) 2a 00 12 db a8 00 00 00 08 00
[20022.558441] sd 2:0:0:0: [sdb] tag#4 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20022.558444] sd 2:0:0:0: [sdb] tag#4 CDB: Read(10) 28 00 0e 76 ba 98 00 00 20 00
[20022.558450] blk_update_request: I/O error, dev sdb, sector 242662040 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[20022.558486] sd 2:0:0:0: [sdb] tag#17 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20022.558492] sd 2:0:0:0: [sdb] tag#17 CDB: Read(10) 28 00 02 4f 86 38 00 00 20 00
[20022.558496] blk_update_request: I/O error, dev sdb, sector 38766136 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[20022.558528] blk_update_request: I/O error, dev sdb, sector 242662040 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20022.558530] sd 2:0:0:0: [sdb] tag#18 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20022.558538] sd 2:0:0:0: [sdb] tag#18 CDB: Write(10) 2a 00 12 db a8 00 00 00 08 00
[20022.558544] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20022.558551] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20022.558577] blk_update_request: I/O error, dev sdb, sector 38766136 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20022.558579] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20022.558583] Aborting journal on device sdb5-8.
[20022.558592] Buffer I/O error on dev sdb3, logical block 4684743, async page read
[20022.558615] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20022.558623] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20022.558628] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20022.558644] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20022.559725] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20022.560294] blk_update_request: I/O error, dev sdb, sector 38766136 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20022.560303] Buffer I/O error on dev sdb3, logical block 4684743, async page read
[20022.569365] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20022.586326] Buffer I/O error on dev sdb3, logical block 531768, async page read
[20022.586409] Buffer I/O error on dev sdb3, logical block 531768, async page read
[20022.838090] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20023.190213] usb 2-2: new SuperSpeed Gen 1 USB device number 17 using xhci_hcd
[20023.211160] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20023.211168] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20023.211173] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20023.211176] usb 2-2: Manufacturer: JMicron
[20023.211180] usb 2-2: SerialNumber: 0123456789ABCDEF
[20023.217045] scsi host2: uas
[20023.218839] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20023.220834] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20023.220841] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20023.220988] sd 2:0:0:0: [sdb] Write Protect is off
[20023.221005] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20023.221321] sd 2:0:0:0: [sdb] Disabling FUA
[20023.221328] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20023.221637] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20023.223138] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20023.264388]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20023.267079] sd 2:0:0:0: [sdb] Attached SCSI disk
[20023.495691] EXT4-fs (sdb5): recovery complete
[20023.495693] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20034.706132] usb 2-2: USB disconnect, device number 17
[20034.708538] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20034.708545] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20034.708576] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20034.716326] JBD2: Error while async write back metadata bh 0.
[20034.716327] Aborting journal on device sdb5-8.
[20034.716342] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20034.716345] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20034.716346] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20034.716349] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20034.730982] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20034.758550] Buffer I/O error on dev sdb3, logical block 531768, async page read
[20034.758826] Buffer I/O error on dev sdb3, logical block 531768, async page read
[20034.970074] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20035.330331] usb 2-2: new SuperSpeed Gen 1 USB device number 18 using xhci_hcd
[20035.351513] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20035.351518] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20035.351521] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20035.351524] usb 2-2: Manufacturer: JMicron
[20035.351526] usb 2-2: SerialNumber: 0123456789ABCDEF
[20035.357479] scsi host2: uas
[20035.358806] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20035.360536] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20035.360829] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20035.360834] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20035.360983] sd 2:0:0:0: [sdb] Write Protect is off
[20035.360995] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20035.361315] sd 2:0:0:0: [sdb] Disabling FUA
[20035.361323] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20035.362787] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20035.407636]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20035.409453] sd 2:0:0:0: [sdb] Attached SCSI disk
[20035.583832] EXT4-fs (sdb5): recovery complete
[20035.584594] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20042.214197] usb 2-2: USB disconnect, device number 18
[20042.215621] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20042.215634] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20042.215709] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20042.228277] JBD2: Error while async write back metadata bh 0.
[20042.228278] Aborting journal on device sdb5-8.
[20042.228294] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20042.228296] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20042.228298] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20042.228301] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20042.246457] EXT4-fs (sdb5): previous I/O error to superblock detected
[20042.246464] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20042.246465] EXT4-fs (sdb5): I/O error while writing superblock
[20042.257714] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20042.502105] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20042.850343] usb 2-2: new SuperSpeed Gen 1 USB device number 19 using xhci_hcd
[20042.871508] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20042.871513] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20042.871516] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20042.871519] usb 2-2: Manufacturer: JMicron
[20042.871521] usb 2-2: SerialNumber: 0123456789ABCDEF
[20042.878183] scsi host2: uas
[20042.880791] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20042.882451] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20042.882461] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20042.882650] sd 2:0:0:0: [sdb] Write Protect is off
[20042.882656] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20042.883029] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20042.883031] sd 2:0:0:0: [sdb] Disabling FUA
[20042.883038] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20042.883471] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20042.919452]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20042.921784] sd 2:0:0:0: [sdb] Attached SCSI disk
[20043.123385] EXT4-fs (sdb5): recovery complete
[20043.124159] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20045.146237] usb 2-2: USB disconnect, device number 19
[20045.152444] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20045.152448] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20045.152456] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20045.152457] Aborting journal on device sdb5-8.
[20045.152464] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20045.152466] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20045.152468] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20045.152472] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20045.189784] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20045.189790] EXT4-fs (sdb5): I/O error while writing superblock
[20045.193515] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20045.430204] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20045.778413] usb 2-2: new SuperSpeed Gen 1 USB device number 20 using xhci_hcd
[20045.803572] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20045.803579] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20045.803582] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20045.803585] usb 2-2: Manufacturer: JMicron
[20045.803588] usb 2-2: SerialNumber: 0123456789ABCDEF
[20045.812311] scsi host2: uas
[20045.813914] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20045.821212] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20045.821750] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20045.821757] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20045.821899] sd 2:0:0:0: [sdb] Write Protect is off
[20045.821905] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20045.822324] sd 2:0:0:0: [sdb] Disabling FUA
[20045.822333] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20045.822697] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20045.856046]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20045.858020] sd 2:0:0:0: [sdb] Attached SCSI disk
[20046.059167] EXT4-fs (sdb5): recovery complete
[20046.059171] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20049.978236] usb 2-2: USB disconnect, device number 20
[20049.978481] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[20049.978505] sd 2:0:0:0: [sdb] tag#22 uas_zap_pending 0 uas-tag 1 inflight: CMD
[20049.978511] sd 2:0:0:0: [sdb] tag#22 CDB: Read(10) 28 00 0e 57 dd 00 00 01 08 00
[20049.978520] sd 2:0:0:0: [sdb] tag#27 uas_zap_pending 0 uas-tag 2 inflight: CMD
[20049.978523] sd 2:0:0:0: [sdb] tag#27 CDB: Read(10) 28 00 00 78 e3 d0 00 01 00 00
[20049.978575] sd 2:0:0:0: [sdb] tag#22 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20049.978579] sd 2:0:0:0: [sdb] tag#22 CDB: Read(10) 28 00 0e 57 dd 00 00 01 08 00
[20049.978584] blk_update_request: I/O error, dev sdb, sector 240639232 op 0x0:(READ) flags 0x80700 phys_seg 33 prio class 0
[20049.978611] sd 2:0:0:0: [sdb] tag#27 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20049.978615] sd 2:0:0:0: [sdb] tag#27 CDB: Read(10) 28 00 00 78 e3 d0 00 01 00 00
[20049.978619] blk_update_request: I/O error, dev sdb, sector 7922640 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[20049.978668] blk_update_request: I/O error, dev sdb, sector 240639240 op 0x0:(READ) flags 0x80000 phys_seg 32 prio class 0
[20049.978709] blk_update_request: I/O error, dev sdb, sector 7922640 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20049.978717] Buffer I/O error on dev sdb3, logical block 829306, async page read
[20049.978726] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #2386336: block 9438905: comm pool: unable to read itable block
[20049.978783] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20049.978793] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20049.978801] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20049.978818] EXT4-fs (sdb5): I/O error while writing superblock
[20049.979881] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20049.979892] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20049.979907] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20049.979910] Aborting journal on device sdb5-8.
[20049.979937] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20049.979944] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20049.979949] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20049.979958] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20049.999445] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20050.238210] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20050.582372] usb 2-2: new SuperSpeed Gen 1 USB device number 21 using xhci_hcd
[20050.603668] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20050.603673] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20050.603677] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20050.603679] usb 2-2: Manufacturer: JMicron
[20050.603682] usb 2-2: SerialNumber: 0123456789ABCDEF
[20050.610184] scsi host2: uas
[20050.611193] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20050.612400] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20050.613103] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20050.613114] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20050.613277] sd 2:0:0:0: [sdb] Write Protect is off
[20050.613284] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20050.613569] sd 2:0:0:0: [sdb] Disabling FUA
[20050.613577] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20050.613872] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20050.649036]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20050.651711] sd 2:0:0:0: [sdb] Attached SCSI disk
[20050.967636] EXT4-fs (sdb5): recovery complete
[20050.967640] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20051.602252] usb 2-2: USB disconnect, device number 21
[20051.602493] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[20051.602516] sd 2:0:0:0: [sdb] tag#15 uas_zap_pending 0 uas-tag 1 inflight: CMD
[20051.602522] sd 2:0:0:0: [sdb] tag#15 CDB: Read(10) 28 00 00 74 c7 a8 00 00 18 00
[20051.602531] sd 2:0:0:0: [sdb] tag#12 uas_zap_pending 0 uas-tag 2 inflight: CMD
[20051.602534] sd 2:0:0:0: [sdb] tag#12 CDB: Read(10) 28 00 0a 57 a9 00 00 00 18 00
[20051.602581] sd 2:0:0:0: [sdb] tag#15 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20051.602585] sd 2:0:0:0: [sdb] tag#15 CDB: Read(10) 28 00 00 74 c7 a8 00 00 18 00
[20051.602591] blk_update_request: I/O error, dev sdb, sector 7653288 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
[20051.602648] sd 2:0:0:0: [sdb] tag#12 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20051.602657] sd 2:0:0:0: [sdb] tag#12 CDB: Read(10) 28 00 0a 57 a9 00 00 00 18 00
[20051.602691] Buffer I/O error on dev sdb3, logical block 795637, async page read
[20051.602709] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #262145: block 1048608: comm pool: unable to read itable block
[20051.602769] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20051.602787] EXT4-fs (sdb5): I/O error while writing superblock
[20051.604281] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #655361: block 2621472: comm pool: unable to read itable block
[20051.604313] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20051.604323] EXT4-fs (sdb5): I/O error while writing superblock
[20051.606984] Buffer I/O error on dev sdb3, logical block 795637, async page read
[20051.607310] Buffer I/O error on dev sdb3, logical block 789096, async page read
[20051.607546] Buffer I/O error on dev sdb3, logical block 2775245, async page read
[20051.608647] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20051.846239] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20052.202371] usb 2-2: new SuperSpeed Gen 1 USB device number 22 using xhci_hcd
[20052.223650] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20052.223656] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20052.223660] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20052.223663] usb 2-2: Manufacturer: JMicron
[20052.223666] usb 2-2: SerialNumber: 0123456789ABCDEF
[20052.229440] scsi host2: uas
[20052.231097] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20052.232831] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20052.233151] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20052.233159] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20052.233347] sd 2:0:0:0: [sdb] Write Protect is off
[20052.233354] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20052.233688] sd 2:0:0:0: [sdb] Disabling FUA
[20052.233695] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20052.234014] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20052.272894]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20052.276784] sd 2:0:0:0: [sdb] Attached SCSI disk
[20052.642256] usb 2-2: USB disconnect, device number 22
[20052.649376] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20052.886215] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20053.238446] usb 2-2: new SuperSpeed Gen 1 USB device number 23 using xhci_hcd
[20053.259122] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20053.259125] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20053.259126] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20053.259128] usb 2-2: Manufacturer: JMicron
[20053.259128] usb 2-2: SerialNumber: 0123456789ABCDEF
[20053.262974] scsi host2: uas
[20053.263582] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20053.264331] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20053.264908] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20053.264910] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20053.265067] sd 2:0:0:0: [sdb] Write Protect is off
[20053.265069] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20053.265368] sd 2:0:0:0: [sdb] Disabling FUA
[20053.265369] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20053.265645] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20053.292049]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20053.293965] sd 2:0:0:0: [sdb] Attached SCSI disk
[20053.529323] EXT4-fs (sdb5): recovery complete
[20053.529326] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20093.134399] usb 2-2: USB disconnect, device number 23
[20093.135421] print_req_error: 13 callbacks suppressed
[20093.135426] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20093.169320] buffer_io_error: 33 callbacks suppressed
[20093.169323] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20093.169327] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20093.169328] Aborting journal on device sdb5-8.
[20093.169330] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20093.169331] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20093.169505] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20093.169507] EXT4-fs (sdb5): I/O error while writing superblock
[20093.171135] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20093.410388] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20093.762568] usb 2-2: new SuperSpeed Gen 1 USB device number 24 using xhci_hcd
[20093.787364] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20093.787369] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20093.787372] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20093.787374] usb 2-2: Manufacturer: JMicron
[20093.787376] usb 2-2: SerialNumber: 0123456789ABCDEF
[20093.793763] scsi host2: uas
[20093.795287] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20093.796497] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20093.797003] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20093.797009] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20093.797158] sd 2:0:0:0: [sdb] Write Protect is off
[20093.797163] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20093.797450] sd 2:0:0:0: [sdb] Disabling FUA
[20093.797457] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20093.797801] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20093.836815]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20093.838978] sd 2:0:0:0: [sdb] Attached SCSI disk
[20094.031980] EXT4-fs (sdb5): recovery complete
[20094.032857] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20103.466428] usb 2-2: USB disconnect, device number 24
[20103.466647] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[20103.466705] sd 2:0:0:0: [sdb] tag#21 uas_zap_pending 0 uas-tag 1 inflight: CMD
[20103.466710] sd 2:0:0:0: [sdb] tag#21 CDB: Read(10) 28 00 15 d7 b2 08 00 01 00 00
[20103.466719] sd 2:0:0:0: [sdb] tag#0 uas_zap_pending 0 uas-tag 2 inflight: CMD
[20103.466722] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 01 2e da 38 00 00 08 00
[20103.466726] sd 2:0:0:0: [sdb] tag#1 uas_zap_pending 0 uas-tag 3 inflight: CMD
[20103.466729] sd 2:0:0:0: [sdb] tag#1 CDB: Write(10) 2a 00 12 db a8 00 00 00 08 00
[20103.466783] sd 2:0:0:0: [sdb] tag#21 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20103.466788] sd 2:0:0:0: [sdb] tag#21 CDB: Read(10) 28 00 15 d7 b2 08 00 01 00 00
[20103.466796] blk_update_request: I/O error, dev sdb, sector 366457352 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[20103.466825] sd 2:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20103.466830] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 01 2e da 38 00 00 08 00
[20103.466834] blk_update_request: I/O error, dev sdb, sector 19847736 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[20103.466860] sd 2:0:0:0: [sdb] tag#1 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20103.466863] sd 2:0:0:0: [sdb] tag#1 CDB: Write(10) 2a 00 12 db a8 00 00 00 08 00
[20103.466866] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20103.466871] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20103.466896] blk_update_request: I/O error, dev sdb, sector 366457360 op 0x0:(READ) flags 0x80000 phys_seg 31 prio class 0
[20103.466910] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20103.466918] Aborting journal on device sdb5-8.
[20103.466932] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #6296368: block 25166162: comm pool: unable to read itable block
[20103.466956] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20103.466987] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20103.466992] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20103.467006] blk_update_request: I/O error, dev sdb, sector 19847736 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20103.467012] Buffer I/O error on dev sdb3, logical block 2319943, async page read
[20103.467038] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20103.467045] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20103.467050] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20103.467073] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20103.467457] EXT4-fs (sdb5): I/O error while writing superblock
[20103.467982] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20103.476046] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20103.714409] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20104.066590] usb 2-2: new SuperSpeed Gen 1 USB device number 25 using xhci_hcd
[20104.091615] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20104.091620] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20104.091624] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20104.091626] usb 2-2: Manufacturer: JMicron
[20104.091629] usb 2-2: SerialNumber: 0123456789ABCDEF
[20104.096778] scsi host2: uas
[20104.097765] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20104.099133] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[20104.100070] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20104.100076] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20104.100247] sd 2:0:0:0: [sdb] Write Protect is off
[20104.100253] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20104.100625] sd 2:0:0:0: [sdb] Disabling FUA
[20104.100634] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20104.101024] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20104.124850]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20104.127539] sd 2:0:0:0: [sdb] Attached SCSI disk
[20104.372845] EXT4-fs (sdb5): recovery complete
[20104.372848] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20125.702474] usb 2-2: USB disconnect, device number 25
[20125.703782] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20125.703793] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20125.707676] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20125.715793] JBD2: Error while async write back metadata bh 0.
[20125.715794] Aborting journal on device sdb5-8.
[20125.715811] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20125.715815] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20125.715817] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20125.715822] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20125.730227] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20125.966464] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20126.306636] usb 2-2: new SuperSpeed Gen 1 USB device number 26 using xhci_hcd
[20126.331626] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20126.331633] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20126.331638] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20126.331642] usb 2-2: Manufacturer: JMicron
[20126.331646] usb 2-2: SerialNumber: 0123456789ABCDEF
[20126.337489] scsi host2: uas
[20126.340529] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20126.342253] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[20126.343293] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20126.343302] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20126.343500] sd 2:0:0:0: [sdb] Write Protect is off
[20126.343507] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20126.343896] sd 2:0:0:0: [sdb] Disabling FUA
[20126.343909] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20126.344329] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20126.375929]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20126.378169] sd 2:0:0:0: [sdb] Attached SCSI disk
[20126.570417] EXT4-fs (sdb5): recovery complete
[20126.571230] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20138.622495] usb 2-2: USB disconnect, device number 26
[20138.623547] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20138.623555] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20138.623611] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20138.636674] JBD2: Error while async write back metadata bh 0.
[20138.636675] Aborting journal on device sdb5-8.
[20138.636691] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20138.636693] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20138.636695] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20138.636699] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20138.657624] EXT4-fs (sdb5): previous I/O error to superblock detected
[20138.657631] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20138.657633] EXT4-fs (sdb5): I/O error while writing superblock
[20138.682666] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20138.938480] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20139.314655] usb 2-2: new SuperSpeed Gen 1 USB device number 27 using xhci_hcd
[20139.335883] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20139.335889] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20139.335892] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20139.335895] usb 2-2: Manufacturer: JMicron
[20139.335897] usb 2-2: SerialNumber: 0123456789ABCDEF
[20139.341936] scsi host2: uas
[20139.343240] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20139.344710] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20139.345108] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20139.345114] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20139.345265] sd 2:0:0:0: [sdb] Write Protect is off
[20139.345271] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20139.345550] sd 2:0:0:0: [sdb] Disabling FUA
[20139.345557] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20139.345946] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20139.384174]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20139.386033] sd 2:0:0:0: [sdb] Attached SCSI disk
[20139.632487] EXT4-fs (sdb5): recovery complete
[20139.633263] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20147.518520] usb 2-2: USB disconnect, device number 27
[20147.518756] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[20147.518817] sd 2:0:0:0: [sdb] tag#27 uas_zap_pending 0 uas-tag 1 inflight: CMD
[20147.518822] sd 2:0:0:0: [sdb] tag#27 CDB: Read(10) 28 00 1b 1b e4 a0 00 00 08 00
[20147.518830] sd 2:0:0:0: [sdb] tag#7 uas_zap_pending 0 uas-tag 2 inflight: CMD
[20147.518833] sd 2:0:0:0: [sdb] tag#7 CDB: Read(10) 28 00 00 78 cb d0 00 01 00 00
[20147.518837] sd 2:0:0:0: [sdb] tag#24 uas_zap_pending 0 uas-tag 3 inflight: CMD
[20147.518840] sd 2:0:0:0: [sdb] tag#24 CDB: Write(10) 2a 00 12 db a8 00 00 00 08 00
[20147.518887] sd 2:0:0:0: [sdb] tag#27 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20147.518891] sd 2:0:0:0: [sdb] tag#27 CDB: Read(10) 28 00 1b 1b e4 a0 00 00 08 00
[20147.518896] blk_update_request: I/O error, dev sdb, sector 454812832 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[20147.518933] sd 2:0:0:0: [sdb] tag#7 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20147.518939] sd 2:0:0:0: [sdb] tag#7 CDB: Read(10) 28 00 00 78 cb d0 00 01 00 00
[20147.518945] blk_update_request: I/O error, dev sdb, sector 7916496 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[20147.518979] blk_update_request: I/O error, dev sdb, sector 454812832 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20147.518984] sd 2:0:0:0: [sdb] tag#24 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20147.518991] sd 2:0:0:0: [sdb] tag#24 CDB: Write(10) 2a 00 12 db a8 00 00 00 08 00
[20147.518996] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20147.519005] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20147.519026] blk_update_request: I/O error, dev sdb, sector 7916504 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20147.519029] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20147.519033] Aborting journal on device sdb5-8.
[20147.519042] Buffer I/O error on dev sdb3, logical block 828539, async page read
[20147.519068] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20147.519076] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20147.519084] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20147.519265] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20147.520195] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20147.532830] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20147.770449] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20148.126621] usb 2-2: new SuperSpeed Gen 1 USB device number 28 using xhci_hcd
[20148.147755] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20148.147760] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20148.147764] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20148.147766] usb 2-2: Manufacturer: JMicron
[20148.147769] usb 2-2: SerialNumber: 0123456789ABCDEF
[20148.153686] scsi host2: uas
[20148.154845] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20148.156063] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20148.156689] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20148.156695] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20148.156860] sd 2:0:0:0: [sdb] Write Protect is off
[20148.156866] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20148.157178] sd 2:0:0:0: [sdb] Disabling FUA
[20148.157189] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20148.157530] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20148.180719]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20148.184042] sd 2:0:0:0: [sdb] Attached SCSI disk
[20148.521855] EXT4-fs (sdb5): recovery complete
[20148.521858] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20166.354514] usb 2-2: USB disconnect, device number 28
[20166.355612] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20166.355621] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20166.355677] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20166.367457] JBD2: Error while async write back metadata bh 0.
[20166.367458] Aborting journal on device sdb5-8.
[20166.367474] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20166.367476] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20166.367478] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20166.367481] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20166.382877] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20166.630452] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20166.974646] usb 2-2: new SuperSpeed Gen 1 USB device number 29 using xhci_hcd
[20166.995887] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20166.995895] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20166.995899] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20166.995902] usb 2-2: Manufacturer: JMicron
[20166.995905] usb 2-2: SerialNumber: 0123456789ABCDEF
[20167.003375] scsi host2: uas
[20167.004694] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20167.005684] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20167.006350] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20167.006357] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20167.006541] sd 2:0:0:0: [sdb] Write Protect is off
[20167.006547] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20167.007080] sd 2:0:0:0: [sdb] Disabling FUA
[20167.007088] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20167.007412] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20167.044725]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20167.047702] sd 2:0:0:0: [sdb] Attached SCSI disk
[20167.359888] EXT4-fs (sdb5): recovery complete
[20167.360689] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20178.210530] usb 2-2: USB disconnect, device number 29
[20178.210742] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[20178.210807] sd 2:0:0:0: [sdb] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
[20178.210813] sd 2:0:0:0: [sdb] tag#2 CDB: Read(10) 28 00 15 2a 3c 10 00 00 18 00
[20178.210821] sd 2:0:0:0: [sdb] tag#3 uas_zap_pending 0 uas-tag 2 inflight: CMD
[20178.210824] sd 2:0:0:0: [sdb] tag#3 CDB: Read(10) 28 00 00 78 bf 10 00 00 c0 00
[20178.210828] sd 2:0:0:0: [sdb] tag#0 uas_zap_pending 0 uas-tag 3 inflight: CMD
[20178.210831] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 78 bf d0 00 01 00 00
[20178.210835] sd 2:0:0:0: [sdb] tag#16 uas_zap_pending 0 uas-tag 4 inflight: CMD
[20178.210838] sd 2:0:0:0: [sdb] tag#16 CDB: Write(10) 2a 00 12 db a8 00 00 00 08 00
[20178.210882] sd 2:0:0:0: [sdb] tag#2 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20178.210885] sd 2:0:0:0: [sdb] tag#2 CDB: Read(10) 28 00 15 2a 3c 10 00 00 18 00
[20178.210890] blk_update_request: I/O error, dev sdb, sector 355089424 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0
[20178.210932] sd 2:0:0:0: [sdb] tag#3 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20178.210937] sd 2:0:0:0: [sdb] tag#3 CDB: Read(10) 28 00 00 78 bf 10 00 00 c0 00
[20178.210943] blk_update_request: I/O error, dev sdb, sector 7913232 op 0x0:(READ) flags 0x80700 phys_seg 24 prio class 0
[20178.210973] blk_update_request: I/O error, dev sdb, sector 355089424 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20178.210980] sd 2:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20178.210986] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 00 78 bf d0 00 01 00 00
[20178.210991] blk_update_request: I/O error, dev sdb, sector 7913424 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[20178.211016] sd 2:0:0:0: [sdb] tag#16 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20178.211020] sd 2:0:0:0: [sdb] tag#16 CDB: Write(10) 2a 00 12 db a8 00 00 00 08 00
[20178.211024] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20178.211032] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20178.211057] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20178.211061] blk_update_request: I/O error, dev sdb, sector 7913232 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20178.211066] Buffer I/O error on dev sdb3, logical block 828130, async page read
[20178.211071] Aborting journal on device sdb5-8.
[20178.211104] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20178.211112] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20178.211118] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20178.211134] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20178.213691] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20178.223135] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20178.494460] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20178.858655] usb 2-2: new SuperSpeed Gen 1 USB device number 30 using xhci_hcd
[20178.879606] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20178.879613] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20178.879618] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20178.879621] usb 2-2: Manufacturer: JMicron
[20178.879625] usb 2-2: SerialNumber: 0123456789ABCDEF
[20178.884843] scsi host2: uas
[20178.887799] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20178.889042] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20178.893182] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20178.893190] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20178.893348] sd 2:0:0:0: [sdb] Write Protect is off
[20178.893354] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20178.893645] sd 2:0:0:0: [sdb] Disabling FUA
[20178.893652] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20178.894030] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20178.927383]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20178.930895] sd 2:0:0:0: [sdb] Attached SCSI disk
[20179.159579] EXT4-fs (sdb5): recovery complete
[20179.159582] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20184.558523] usb 2-2: USB disconnect, device number 30
[20184.558782] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[20184.558805] sd 2:0:0:0: [sdb] tag#22 uas_zap_pending 0 uas-tag 1 inflight: CMD
[20184.558811] sd 2:0:0:0: [sdb] tag#22 CDB: Read(10) 28 00 01 2c 4b 80 00 00 08 00
[20184.558820] sd 2:0:0:0: [sdb] tag#14 uas_zap_pending 0 uas-tag 2 inflight: CMD
[20184.558823] sd 2:0:0:0: [sdb] tag#14 CDB: Read(10) 28 00 1b 08 09 a8 00 00 20 00
[20184.558872] sd 2:0:0:0: [sdb] tag#22 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20184.558876] sd 2:0:0:0: [sdb] tag#22 CDB: Read(10) 28 00 01 2c 4b 80 00 00 08 00
[20184.558882] blk_update_request: I/O error, dev sdb, sector 19680128 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[20184.558935] sd 2:0:0:0: [sdb] tag#14 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20184.558944] sd 2:0:0:0: [sdb] tag#14 CDB: Read(10) 28 00 1b 08 09 a8 00 00 20 00
[20184.558952] blk_update_request: I/O error, dev sdb, sector 453511592 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[20184.558989] blk_update_request: I/O error, dev sdb, sector 19680128 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20184.558997] Buffer I/O error on dev sdb3, logical block 2298992, async page read
[20184.560058] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20184.560070] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20184.560102] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20184.560106] Aborting journal on device sdb5-8.
[20184.560128] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20184.560136] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20184.560141] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20184.560151] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20184.596193] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20184.596196] EXT4-fs (sdb5): I/O error while writing superblock
[20184.610633] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20184.850518] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20185.210679] usb 2-2: new SuperSpeed Gen 1 USB device number 31 using xhci_hcd
[20185.231477] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20185.231482] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20185.231486] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20185.231488] usb 2-2: Manufacturer: JMicron
[20185.231491] usb 2-2: SerialNumber: 0123456789ABCDEF
[20185.237277] scsi host2: uas
[20185.238284] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20185.239472] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20185.240180] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20185.240187] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20185.240345] sd 2:0:0:0: [sdb] Write Protect is off
[20185.240351] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20185.240660] sd 2:0:0:0: [sdb] Disabling FUA
[20185.240668] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20185.240982] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20185.271484]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20185.274192] sd 2:0:0:0: [sdb] Attached SCSI disk
[20185.517305] EXT4-fs (sdb5): recovery complete
[20185.517308] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20219.922484] usb 2-2: USB disconnect, device number 31
[20219.923589] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20219.961196] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20219.961201] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20219.961202] Aborting journal on device sdb5-8.
[20219.961203] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20219.961204] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20219.961362] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20219.961366] EXT4-fs (sdb5): I/O error while writing superblock
[20219.978056] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20220.214406] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20220.558632] usb 2-2: new SuperSpeed Gen 1 USB device number 32 using xhci_hcd
[20220.579677] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20220.579681] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20220.579683] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20220.579685] usb 2-2: Manufacturer: JMicron
[20220.579687] usb 2-2: SerialNumber: 0123456789ABCDEF
[20220.585938] scsi host2: uas
[20220.586869] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20220.588136] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[20220.589138] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20220.589143] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20220.589324] sd 2:0:0:0: [sdb] Write Protect is off
[20220.589329] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20220.589679] sd 2:0:0:0: [sdb] Disabling FUA
[20220.589686] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20220.590028] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20220.616877]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20220.619548] sd 2:0:0:0: [sdb] Attached SCSI disk
[20220.853135] EXT4-fs (sdb5): recovery complete
[20220.854263] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20224.854503] usb 2-2: USB disconnect, device number 32
[20224.855899] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20224.855909] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20224.855929] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20224.855936] Aborting journal on device sdb5-8.
[20224.855975] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20224.855984] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20224.855992] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20224.856006] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20224.856057] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20224.891586] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20224.891590] EXT4-fs (sdb5): I/O error while writing superblock
[20224.902244] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20225.138483] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20225.498675] usb 2-2: new SuperSpeed Gen 1 USB device number 33 using xhci_hcd
[20225.519448] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20225.519453] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20225.519457] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20225.519459] usb 2-2: Manufacturer: JMicron
[20225.519462] usb 2-2: SerialNumber: 0123456789ABCDEF
[20225.526672] scsi host2: uas
[20225.527653] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20225.530977] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20225.533010] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20225.533018] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20225.533203] sd 2:0:0:0: [sdb] Write Protect is off
[20225.533209] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20225.533667] sd 2:0:0:0: [sdb] Disabling FUA
[20225.533677] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20225.534038] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20225.569111]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20225.572027] sd 2:0:0:0: [sdb] Attached SCSI disk
[20225.812079] EXT4-fs (sdb5): recovery complete
[20225.812083] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20255.814397] usb 2-2: USB disconnect, device number 33
[20255.815583] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20255.815591] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20255.818396] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20255.827638] JBD2: Error while async write back metadata bh 0.
[20255.827638] Aborting journal on device sdb5-8.
[20255.827654] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20255.827656] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20255.827657] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20255.827661] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20255.842692] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20256.082377] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20256.414536] usb 2-2: new SuperSpeed Gen 1 USB device number 34 using xhci_hcd
[20256.435844] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20256.435849] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20256.435852] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20256.435855] usb 2-2: Manufacturer: JMicron
[20256.435857] usb 2-2: SerialNumber: 0123456789ABCDEF
[20256.442071] scsi host2: uas
[20256.443101] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20256.445046] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20256.445053] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20256.445215] sd 2:0:0:0: [sdb] Write Protect is off
[20256.445221] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20256.445515] sd 2:0:0:0: [sdb] Disabling FUA
[20256.445523] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20256.445857] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20256.447410] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20256.489093]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20256.492010] sd 2:0:0:0: [sdb] Attached SCSI disk
[20256.725102] EXT4-fs (sdb5): recovery complete
[20256.725945] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20262.258408] usb 2-2: USB disconnect, device number 34
[20262.259609] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20262.259619] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20262.259638] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20262.259645] Aborting journal on device sdb5-8.
[20262.259683] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20262.259691] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20262.259698] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20262.259711] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20262.294711] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20262.562324] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20262.930573] usb 2-2: new SuperSpeed Gen 1 USB device number 35 using xhci_hcd
[20262.951518] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20262.951526] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20262.951531] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20262.951535] usb 2-2: Manufacturer: JMicron
[20262.951539] usb 2-2: SerialNumber: 0123456789ABCDEF
[20262.958356] scsi host2: uas
[20262.959479] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20262.960678] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[20262.965691] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20262.965699] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20262.965886] sd 2:0:0:0: [sdb] Write Protect is off
[20262.965893] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20262.966257] sd 2:0:0:0: [sdb] Disabling FUA
[20262.966264] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20262.966693] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20263.008134]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20263.010606] sd 2:0:0:0: [sdb] Attached SCSI disk
[20268.066386] usb 2-2: USB disconnect, device number 35
[20268.066634] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[20268.066653] sd 2:0:0:0: [sdb] tag#28 uas_zap_pending 0 uas-tag 1 inflight: CMD
[20268.066658] sd 2:0:0:0: [sdb] tag#28 CDB: Read(10) 28 00 1d ab 48 00 00 00 08 00
[20268.066668] sd 2:0:0:0: [sdb] tag#12 uas_zap_pending 0 uas-tag 2 inflight: CMD
[20268.066671] sd 2:0:0:0: [sdb] tag#12 CDB: Read(10) 28 00 00 0f a9 00 00 00 08 00
[20268.066675] sd 2:0:0:0: [sdb] tag#26 uas_zap_pending 0 uas-tag 3 inflight: CMD
[20268.066678] sd 2:0:0:0: [sdb] tag#26 CDB: Read(10) 28 00 09 c4 30 80 00 00 08 00
[20268.066682] sd 2:0:0:0: [sdb] tag#13 uas_zap_pending 0 uas-tag 4 inflight: CMD
[20268.066685] sd 2:0:0:0: [sdb] tag#13 CDB: Read(10) 28 00 00 13 a8 08 00 00 08 00
[20268.066689] sd 2:0:0:0: [sdb] tag#14 uas_zap_pending 0 uas-tag 5 inflight: CMD
[20268.066692] sd 2:0:0:0: [sdb] tag#14 CDB: Read(10) 28 00 00 0f a4 00 00 02 00 00
[20268.066696] sd 2:0:0:0: [sdb] tag#27 uas_zap_pending 0 uas-tag 6 inflight: CMD
[20268.066698] sd 2:0:0:0: [sdb] tag#27 CDB: Read(10) 28 00 1c 05 cc 00 00 02 00 00
[20268.066703] sd 2:0:0:0: [sdb] tag#3 uas_zap_pending 0 uas-tag 10 inflight: CMD
[20268.066706] sd 2:0:0:0: [sdb] tag#3 CDB: Read(10) 28 00 1c 13 e0 88 00 00 78 00
[20268.066710] sd 2:0:0:0: [sdb] tag#0 uas_zap_pending 0 uas-tag 11 inflight: CMD
[20268.066713] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 1c 13 e1 08 00 00 f8 00
[20268.066756] sd 2:0:0:0: [sdb] tag#28 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20268.066759] sd 2:0:0:0: [sdb] tag#28 CDB: Read(10) 28 00 1d ab 48 00 00 00 08 00
[20268.066764] blk_update_request: I/O error, dev sdb, sector 497764352 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[20268.066799] sd 2:0:0:0: [sdb] tag#12 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20268.066803] sd 2:0:0:0: [sdb] tag#12 CDB: Read(10) 28 00 00 0f a9 00 00 00 08 00
[20268.066807] blk_update_request: I/O error, dev sdb, sector 1026304 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[20268.066829] sd 2:0:0:0: [sdb] tag#26 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20268.066841] sd 2:0:0:0: [sdb] tag#26 CDB: Read(10) 28 00 09 c4 30 80 00 00 08 00
[20268.066847] blk_update_request: I/O error, dev sdb, sector 163852416 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[20268.066860] blk_update_request: I/O error, dev sdb, sector 497764352 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20268.066871] Buffer I/O error on dev sdb7, logical block 1024, async page read
[20268.066879] sd 2:0:0:0: [sdb] tag#13 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20268.066882] blk_update_request: I/O error, dev sdb, sector 1026304 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20268.066886] Buffer I/O error on dev sdb2, logical block 32, async page read
[20268.066903] sd 2:0:0:0: [sdb] tag#13 CDB: Read(10) 28 00 00 13 a8 08 00 00 08 00
[20268.066910] blk_update_request: I/O error, dev sdb, sector 1288200 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[20268.066925] blk_update_request: I/O error, dev sdb, sector 163852416 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20268.066933] Buffer I/O error on dev sdb4, logical block 16, async page read
[20268.066952] sd 2:0:0:0: [sdb] tag#14 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20268.066959] sd 2:0:0:0: [sdb] tag#14 CDB: Read(10) 28 00 00 0f a4 00 00 02 00 00
[20268.066965] blk_update_request: I/O error, dev sdb, sector 1025024 op 0x0:(READ) flags 0x80700 phys_seg 64 prio class 0
[20268.067010] sd 2:0:0:0: [sdb] tag#27 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20268.067015] sd 2:0:0:0: [sdb] tag#27 CDB: Read(10) 28 00 1c 05 cc 00 00 02 00 00
[20268.067019] blk_update_request: I/O error, dev sdb, sector 470141952 op 0x0:(READ) flags 0x80700 phys_seg 64 prio class 0
[20268.067063] sd 2:0:0:0: [sdb] tag#3 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20268.067069] sd 2:0:0:0: [sdb] tag#3 CDB: Read(10) 28 00 1c 13 e0 88 00 00 78 00
[20268.067073] blk_update_request: I/O error, dev sdb, sector 471064712 op 0x0:(READ) flags 0x80700 phys_seg 15 prio class 0
[20268.067102] sd 2:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20268.067107] sd 2:0:0:0: [sdb] tag#0 CDB: Read(10) 28 00 1c 13 e1 08 00 00 f8 00
[20268.067881] Buffer I/O error on dev sdb5, logical block 38126720, async page read
[20268.068927] Buffer I/O error on dev sdb1, logical block 127872, async page read
[20268.070378] Buffer I/O error on dev sdb6, logical block 17, async page read
[20268.070552] Buffer I/O error on dev sdb6, logical block 2, async page read
[20268.071767] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20268.072735] Buffer I/O error on dev sdb3, logical block 8, async page read
[20268.072738] Buffer I/O error on dev sdb3, logical block 9, async page read
[20268.072740] Buffer I/O error on dev sdb3, logical block 10, async page read
[20268.314419] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20268.666501] usb 2-2: new SuperSpeed Gen 1 USB device number 36 using xhci_hcd
[20268.687361] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20268.687362] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20268.687363] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20268.687364] usb 2-2: Manufacturer: JMicron
[20268.687365] usb 2-2: SerialNumber: 0123456789ABCDEF
[20268.692531] scsi host2: uas
[20268.693050] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20268.694317] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20268.695518] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20268.695520] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20268.695683] sd 2:0:0:0: [sdb] Write Protect is off
[20268.695684] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20268.695996] sd 2:0:0:0: [sdb] Disabling FUA
[20268.695998] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20268.696280] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20268.724334]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20268.725919] sd 2:0:0:0: [sdb] Attached SCSI disk
[20268.902530] EXT4-fs (sdb5): recovery complete
[20268.902533] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20278.566400] usb 2-2: USB disconnect, device number 36
[20278.567756] print_req_error: 6 callbacks suppressed
[20278.567761] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20278.567771] buffer_io_error: 5 callbacks suppressed
[20278.567775] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20278.567847] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20278.581538] JBD2: Error while async write back metadata bh 0.
[20278.581539] Aborting journal on device sdb5-8.
[20278.581556] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20278.581558] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20278.581560] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20278.581563] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20278.602402] EXT4-fs (sdb5): previous I/O error to superblock detected
[20278.602411] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20278.602413] EXT4-fs (sdb5): I/O error while writing superblock
[20278.605527] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20278.846309] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20279.210493] usb 2-2: new SuperSpeed Gen 1 USB device number 37 using xhci_hcd
[20279.235518] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20279.235523] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20279.235527] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20279.235529] usb 2-2: Manufacturer: JMicron
[20279.235532] usb 2-2: SerialNumber: 0123456789ABCDEF
[20279.242972] scsi host2: uas
[20279.245267] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20279.246367] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[20279.249615] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20279.249622] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20279.249778] sd 2:0:0:0: [sdb] Write Protect is off
[20279.249785] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20279.250080] sd 2:0:0:0: [sdb] Disabling FUA
[20279.250087] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20279.250446] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20279.280088]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20279.282093] sd 2:0:0:0: [sdb] Attached SCSI disk
[20279.470435] EXT4-fs (sdb5): recovery complete
[20279.471177] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20287.314329] usb 2-2: USB disconnect, device number 37
[20287.315424] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20287.315433] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20287.315492] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20287.327731] JBD2: Error while async write back metadata bh 0.
[20287.327732] Aborting journal on device sdb5-8.
[20287.327748] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20287.327750] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20287.327751] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20287.327755] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20287.343684] EXT4-fs (sdb5): previous I/O error to superblock detected
[20287.343695] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20287.343698] EXT4-fs (sdb5): I/O error while writing superblock
[20287.344173] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20287.582228] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20287.922493] usb 2-2: new SuperSpeed Gen 1 USB device number 38 using xhci_hcd
[20287.943627] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20287.943632] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20287.943635] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20287.943638] usb 2-2: Manufacturer: JMicron
[20287.943640] usb 2-2: SerialNumber: 0123456789ABCDEF
[20287.949018] scsi host2: uas
[20287.951582] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20287.952772] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20287.953423] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20287.953429] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20287.953587] sd 2:0:0:0: [sdb] Write Protect is off
[20287.953592] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20287.953964] sd 2:0:0:0: [sdb] Disabling FUA
[20287.953972] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20287.954319] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20287.989229]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20287.992458] sd 2:0:0:0: [sdb] Attached SCSI disk
[20288.214104] EXT4-fs (sdb5): recovery complete
[20288.214881] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20303.818296] usb 2-2: USB disconnect, device number 38
[20303.819984] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20303.820000] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20303.820099] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20303.835889] JBD2: Error while async write back metadata bh 0.
[20303.835890] Aborting journal on device sdb5-8.
[20303.835906] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20303.835908] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20303.835910] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20303.835914] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20303.862579] EXT4-fs (sdb5): previous I/O error to superblock detected
[20303.862585] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20303.862587] EXT4-fs (sdb5): I/O error while writing superblock
[20303.868952] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20304.118229] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20304.746554] usb 2-2: new SuperSpeed Gen 1 USB device number 39 using xhci_hcd
[20304.771453] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20304.771455] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20304.771456] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20304.771457] usb 2-2: Manufacturer: JMicron
[20304.771458] usb 2-2: SerialNumber: 0123456789ABCDEF
[20304.775742] scsi host2: uas
[20304.776387] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20304.777220] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20304.778122] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20304.778124] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20304.778291] sd 2:0:0:0: [sdb] Write Protect is off
[20304.778294] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20304.778609] sd 2:0:0:0: [sdb] Disabling FUA
[20304.778612] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20304.778898] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20304.811718]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20304.814737] sd 2:0:0:0: [sdb] Attached SCSI disk
[20304.996684] EXT4-fs (sdb5): recovery complete
[20304.997484] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20306.602273] usb 2-2: USB disconnect, device number 39
[20306.602483] usb 2-2: cmd cmplt err -108
[20306.602491] usb 2-2: cmd cmplt err -108
[20306.602499] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[20306.602600] sd 2:0:0:0: [sdb] tag#12 uas_zap_pending 0 uas-tag 1 inflight: CMD
[20306.602606] sd 2:0:0:0: [sdb] tag#12 CDB: Read(10) 28 00 0b 1c a1 60 00 00 20 00
[20306.602616] sd 2:0:0:0: [sdb] tag#16 uas_zap_pending 0 uas-tag 2 inflight: CMD
[20306.602620] sd 2:0:0:0: [sdb] tag#16 CDB: Read(10) 28 00 05 12 60 98 00 01 00 00
[20306.602675] sd 2:0:0:0: [sdb] tag#12 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20306.602679] sd 2:0:0:0: [sdb] tag#12 CDB: Read(10) 28 00 0b 1c a1 60 00 00 20 00
[20306.602686] blk_update_request: I/O error, dev sdb, sector 186425696 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0
[20306.602730] sd 2:0:0:0: [sdb] tag#16 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20306.602734] sd 2:0:0:0: [sdb] tag#16 CDB: Read(10) 28 00 05 12 60 98 00 01 00 00
[20306.602740] blk_update_request: I/O error, dev sdb, sector 85090456 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[20306.602790] blk_update_request: I/O error, dev sdb, sector 85090712 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[20306.602817] blk_update_request: I/O error, dev sdb, sector 186425696 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20306.602825] blk_update_request: I/O error, dev sdb, sector 85090456 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20306.602832] Buffer I/O error on dev sdb3, logical block 10475283, async page read
[20306.609181] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20306.609195] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20306.609213] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20306.609217] Aborting journal on device sdb5-8.
[20306.609242] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20306.609253] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20306.624803] Buffer I/O error on dev sdb3, logical block 10475283, async page read
[20306.703493] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20306.962236] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20307.306384] usb 2-2: new SuperSpeed Gen 1 USB device number 40 using xhci_hcd
[20307.331643] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20307.331648] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20307.331652] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20307.331655] usb 2-2: Manufacturer: JMicron
[20307.331658] usb 2-2: SerialNumber: 0123456789ABCDEF
[20307.341552] scsi host2: uas
[20307.342663] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20307.343802] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20307.345408] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20307.345415] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20307.345569] sd 2:0:0:0: [sdb] Write Protect is off
[20307.345575] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20307.345861] sd 2:0:0:0: [sdb] Disabling FUA
[20307.345869] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20307.346197] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20307.392522]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20307.396087] sd 2:0:0:0: [sdb] Attached SCSI disk
[20307.834670] EXT4-fs (sdb5): recovery complete
[20307.834682] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20315.934225] usb 2-2: USB disconnect, device number 40
[20315.935415] print_req_error: 3 callbacks suppressed
[20315.935420] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20315.935429] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20315.935485] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20315.948958] JBD2: Error while async write back metadata bh 0.
[20315.948959] Aborting journal on device sdb5-8.
[20315.948975] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20315.948977] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20315.948979] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20315.948982] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20315.970966] EXT4-fs (sdb5): previous I/O error to superblock detected
[20315.971001] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20315.971003] EXT4-fs (sdb5): I/O error while writing superblock
[20315.983014] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20316.262230] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20316.602324] usb 2-2: new SuperSpeed Gen 1 USB device number 41 using xhci_hcd
[20316.623540] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20316.623545] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20316.623549] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20316.623551] usb 2-2: Manufacturer: JMicron
[20316.623554] usb 2-2: SerialNumber: 0123456789ABCDEF
[20316.630423] scsi host2: uas
[20316.631490] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20316.633446] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20316.634044] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20316.634052] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20316.638150] sd 2:0:0:0: [sdb] Write Protect is off
[20316.638158] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20316.638506] sd 2:0:0:0: [sdb] Disabling FUA
[20316.638514] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20316.638817] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20316.676347]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20316.679403] sd 2:0:0:0: [sdb] Attached SCSI disk
[20316.910086] EXT4-fs (sdb5): recovery complete
[20316.910943] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20341.886133] usb 2-2: USB disconnect, device number 41
[20341.892719] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20341.892726] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20341.893244] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20341.902786] JBD2: Error while async write back metadata bh 0.
[20341.902787] Aborting journal on device sdb5-8.
[20341.902804] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20341.902806] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20341.902807] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20341.902811] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20341.918727] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20342.158097] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20342.506280] usb 2-2: new SuperSpeed Gen 1 USB device number 42 using xhci_hcd
[20342.527548] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20342.527553] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20342.527557] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20342.527559] usb 2-2: Manufacturer: JMicron
[20342.527562] usb 2-2: SerialNumber: 0123456789ABCDEF
[20342.533654] scsi host2: uas
[20342.534762] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20342.536559] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20342.536566] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20342.536663] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20342.536724] sd 2:0:0:0: [sdb] Write Protect is off
[20342.536729] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20342.537051] sd 2:0:0:0: [sdb] Disabling FUA
[20342.537058] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20342.537379] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20342.572269]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20342.575052] sd 2:0:0:0: [sdb] Attached SCSI disk
[20342.821961] EXT4-fs (sdb5): recovery complete
[20342.822766] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20366.402004] usb 2-2: USB disconnect, device number 42
[20366.403305] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20366.403314] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20366.403362] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20366.417346] JBD2: Error while async write back metadata bh 0.
[20366.417347] Aborting journal on device sdb5-8.
[20366.417365] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20366.417367] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20366.417369] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20366.417372] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20366.435012] EXT4-fs (sdb5): previous I/O error to superblock detected
[20366.435019] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20366.435022] EXT4-fs (sdb5): I/O error while writing superblock
[20366.454989] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20366.693910] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20367.038122] usb 2-2: new SuperSpeed Gen 1 USB device number 43 using xhci_hcd
[20367.059249] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20367.059253] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20367.059256] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20367.059258] usb 2-2: Manufacturer: JMicron
[20367.059260] usb 2-2: SerialNumber: 0123456789ABCDEF
[20367.064770] scsi host2: uas
[20367.066255] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20367.067923] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20367.067929] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20367.068073] sd 2:0:0:0: [sdb] Write Protect is off
[20367.068078] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20367.068433] sd 2:0:0:0: [sdb] Disabling FUA
[20367.068439] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20367.068779] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20367.069299] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20367.096886]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20367.099095] sd 2:0:0:0: [sdb] Attached SCSI disk
[20367.293997] EXT4-fs (sdb5): recovery complete
[20367.295835] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20402.753793] usb 2-2: USB disconnect, device number 43
[20402.755155] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20402.792661] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20402.792834] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20402.792836] Aborting journal on device sdb5-8.
[20402.792838] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20402.792839] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20402.792967] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20403.037803] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20403.397934] usb 2-2: new SuperSpeed Gen 1 USB device number 44 using xhci_hcd
[20403.419080] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20403.419085] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20403.419088] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20403.419090] usb 2-2: Manufacturer: JMicron
[20403.419093] usb 2-2: SerialNumber: 0123456789ABCDEF
[20403.424404] scsi host2: uas
[20403.425559] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20403.426952] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20403.427664] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20403.427671] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20403.427835] sd 2:0:0:0: [sdb] Write Protect is off
[20403.427841] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20403.428197] sd 2:0:0:0: [sdb] Disabling FUA
[20403.428204] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20403.428587] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20403.456459]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20403.459567] sd 2:0:0:0: [sdb] Attached SCSI disk
[20403.713701] EXT4-fs (sdb5): recovery complete
[20403.714504] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20422.905680] usb 2-2: USB disconnect, device number 44
[20422.905890] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[20422.905952] sd 2:0:0:0: [sdb] tag#6 uas_zap_pending 0 uas-tag 1 inflight: CMD
[20422.905957] sd 2:0:0:0: [sdb] tag#6 CDB: Read(10) 28 00 0c 58 8a 00 00 01 08 00
[20422.905966] sd 2:0:0:0: [sdb] tag#5 uas_zap_pending 0 uas-tag 2 inflight: CMD
[20422.905969] sd 2:0:0:0: [sdb] tag#5 CDB: Read(10) 28 00 01 2c 1d 50 00 00 08 00
[20422.905973] sd 2:0:0:0: [sdb] tag#7 uas_zap_pending 0 uas-tag 3 inflight: CMD
[20422.905976] sd 2:0:0:0: [sdb] tag#7 CDB: Read(10) 28 00 01 2c 1d 60 00 00 08 00
[20422.905980] sd 2:0:0:0: [sdb] tag#19 uas_zap_pending 0 uas-tag 4 inflight: CMD
[20422.905983] sd 2:0:0:0: [sdb] tag#19 CDB: Write(10) 2a 00 12 db a8 00 00 00 08 00
[20422.906034] sd 2:0:0:0: [sdb] tag#6 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20422.906037] sd 2:0:0:0: [sdb] tag#6 CDB: Read(10) 28 00 0c 58 8a 00 00 01 08 00
[20422.906042] blk_update_request: I/O error, dev sdb, sector 207129088 op 0x0:(READ) flags 0x80700 phys_seg 33 prio class 0
[20422.906064] sd 2:0:0:0: [sdb] tag#5 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20422.906067] sd 2:0:0:0: [sdb] tag#5 CDB: Read(10) 28 00 01 2c 1d 50 00 00 08 00
[20422.906071] blk_update_request: I/O error, dev sdb, sector 19668304 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[20422.906098] sd 2:0:0:0: [sdb] tag#7 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20422.906101] sd 2:0:0:0: [sdb] tag#7 CDB: Read(10) 28 00 01 2c 1d 60 00 00 08 00
[20422.906103] blk_update_request: I/O error, dev sdb, sector 19668320 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[20422.906111] sd 2:0:0:0: [sdb] tag#19 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20422.906114] sd 2:0:0:0: [sdb] tag#19 CDB: Write(10) 2a 00 12 db a8 00 00 00 08 00
[20422.906117] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20422.906123] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20422.906148] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20422.906151] blk_update_request: I/O error, dev sdb, sector 207129096 op 0x0:(READ) flags 0x80000 phys_seg 32 prio class 0
[20422.906160] Aborting journal on device sdb5-8.
[20422.906187] blk_update_request: I/O error, dev sdb, sector 19668304 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20422.906194] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #1426292: block 5250135: comm pool: unable to read itable block
[20422.906199] Buffer I/O error on dev sdb3, logical block 2297514, async page read
[20422.906216] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20422.906228] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20422.906232] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20422.906244] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20422.906257] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20422.906266] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20422.906271] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20422.906285] EXT4-fs (sdb5): I/O error while writing superblock
[20422.932247] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20423.169685] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20423.513793] usb 2-2: new SuperSpeed Gen 1 USB device number 45 using xhci_hcd
[20423.534913] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20423.534918] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20423.534921] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20423.534924] usb 2-2: Manufacturer: JMicron
[20423.534926] usb 2-2: SerialNumber: 0123456789ABCDEF
[20423.539998] scsi host2: uas
[20423.541965] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20423.543504] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20423.544029] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20423.544036] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20423.544180] sd 2:0:0:0: [sdb] Write Protect is off
[20423.544185] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20423.544459] sd 2:0:0:0: [sdb] Disabling FUA
[20423.544468] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20423.544804] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20423.571909]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20423.574345] sd 2:0:0:0: [sdb] Attached SCSI disk
[20423.943523] EXT4-fs (sdb5): recovery complete
[20423.943529] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20429.945629] usb 2-2: USB disconnect, device number 45
[20429.945844] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[20429.945865] sd 2:0:0:0: [sdb] tag#21 uas_zap_pending 0 uas-tag 1 inflight: CMD
[20429.945870] sd 2:0:0:0: [sdb] tag#21 CDB: Read(10) 28 00 0c 98 2b 00 00 01 08 00
[20429.945877] sd 2:0:0:0: [sdb] tag#4 uas_zap_pending 0 uas-tag 2 inflight: CMD
[20429.945880] sd 2:0:0:0: [sdb] tag#4 CDB: Read(10) 28 00 00 78 d6 d0 00 01 00 00
[20429.945884] sd 2:0:0:0: [sdb] tag#22 uas_zap_pending 0 uas-tag 3 inflight: CMD
[20429.945887] sd 2:0:0:0: [sdb] tag#22 CDB: Read(10) 28 00 00 78 d7 d0 00 01 00 00
[20429.945935] sd 2:0:0:0: [sdb] tag#21 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20429.945941] sd 2:0:0:0: [sdb] tag#21 CDB: Read(10) 28 00 0c 98 2b 00 00 01 08 00
[20429.945944] print_req_error: 1 callbacks suppressed
[20429.945950] blk_update_request: I/O error, dev sdb, sector 211299072 op 0x0:(READ) flags 0x80000 phys_seg 33 prio class 0
[20429.946011] sd 2:0:0:0: [sdb] tag#4 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20429.946013] sd 2:0:0:0: [sdb] tag#4 CDB: Read(10) 28 00 00 78 d6 d0 00 01 00 00
[20429.946017] blk_update_request: I/O error, dev sdb, sector 7919312 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[20429.946038] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #1508360: block 5771360: comm pool: unable to read itable block
[20429.946043] sd 2:0:0:0: [sdb] tag#22 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20429.946047] sd 2:0:0:0: [sdb] tag#22 CDB: Read(10) 28 00 00 78 d7 d0 00 01 00 00
[20429.946050] blk_update_request: I/O error, dev sdb, sector 7919568 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[20429.946074] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20429.946082] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20429.946088] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20429.946095] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20429.946102] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20429.946104] blk_update_request: I/O error, dev sdb, sector 7919312 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20429.946108] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20429.946110] Buffer I/O error on dev sdb3, logical block 828890, async page read
[20429.946112] Aborting journal on device sdb5-8.
[20429.946129] EXT4-fs (sdb5): I/O error while writing superblock
[20429.946136] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20429.946143] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20429.946148] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20429.946160] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20429.947115] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20429.967547] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20430.205610] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20430.545808] usb 2-2: new SuperSpeed Gen 1 USB device number 46 using xhci_hcd
[20430.570815] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20430.570823] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20430.570827] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20430.570831] usb 2-2: Manufacturer: JMicron
[20430.570835] usb 2-2: SerialNumber: 0123456789ABCDEF
[20430.577223] scsi host2: uas
[20430.579783] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20430.581230] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20430.583585] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20430.583591] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20430.583755] sd 2:0:0:0: [sdb] Write Protect is off
[20430.583761] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20430.584099] sd 2:0:0:0: [sdb] Disabling FUA
[20430.584108] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20430.584438] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20430.623954]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20430.627031] sd 2:0:0:0: [sdb] Attached SCSI disk
[20430.846661] EXT4-fs (sdb5): recovery complete
[20430.846663] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20445.653534] usb 2-2: USB disconnect, device number 46
[20445.654889] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20445.654899] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20445.657497] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20445.668653] JBD2: Error while async write back metadata bh 0.
[20445.668654] Aborting journal on device sdb5-8.
[20445.668669] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20445.668671] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20445.668673] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20445.668676] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20445.691164] EXT4-fs (sdb5): previous I/O error to superblock detected
[20445.691170] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20445.691172] EXT4-fs (sdb5): I/O error while writing superblock
[20445.700956] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20445.937486] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20446.281638] usb 2-2: new SuperSpeed Gen 1 USB device number 47 using xhci_hcd
[20446.307025] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20446.307030] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20446.307033] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20446.307036] usb 2-2: Manufacturer: JMicron
[20446.307038] usb 2-2: SerialNumber: 0123456789ABCDEF
[20446.312640] scsi host2: uas
[20446.313906] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20446.315892] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20446.316067] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20446.316073] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20446.316231] sd 2:0:0:0: [sdb] Write Protect is off
[20446.316237] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20446.316573] sd 2:0:0:0: [sdb] Disabling FUA
[20446.316582] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20446.316943] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20446.348498]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20446.355553] sd 2:0:0:0: [sdb] Attached SCSI disk
[20446.566667] EXT4-fs (sdb5): recovery complete
[20446.567475] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20447.185533] usb 2-2: USB disconnect, device number 47
[20447.185729] usb 2-2: cmd cmplt err -108
[20447.185737] usb 2-2: cmd cmplt err -108
[20447.185741] usb 2-2: cmd cmplt err -108
[20447.185745] usb 2-2: cmd cmplt err -108
[20447.185753] xhci_hcd 0000:00:14.0: WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.
[20447.185875] sd 2:0:0:0: [sdb] tag#2 uas_zap_pending 0 uas-tag 1 inflight: CMD
[20447.185881] sd 2:0:0:0: [sdb] tag#2 CDB: Read(10) 28 00 1b 1b e1 00 00 00 08 00
[20447.185891] sd 2:0:0:0: [sdb] tag#19 uas_zap_pending 0 uas-tag 2 inflight: CMD
[20447.185894] sd 2:0:0:0: [sdb] tag#19 CDB: Read(10) 28 00 00 78 cd d0 00 00 08 00
[20447.185900] sd 2:0:0:0: [sdb] tag#16 uas_zap_pending 0 uas-tag 3 inflight: CMD
[20447.185903] sd 2:0:0:0: [sdb] tag#16 CDB: Read(10) 28 00 00 78 cd e0 00 00 f0 00
[20447.185907] sd 2:0:0:0: [sdb] tag#17 uas_zap_pending 0 uas-tag 4 inflight: CMD
[20447.185910] sd 2:0:0:0: [sdb] tag#17 CDB: Read(10) 28 00 00 78 ce d0 00 01 00 00
[20447.185961] sd 2:0:0:0: [sdb] tag#2 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20447.185967] sd 2:0:0:0: [sdb] tag#2 CDB: Read(10) 28 00 1b 1b e1 00 00 00 08 00
[20447.185974] blk_update_request: I/O error, dev sdb, sector 454811904 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[20447.186015] sd 2:0:0:0: [sdb] tag#19 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20447.186021] sd 2:0:0:0: [sdb] tag#19 CDB: Read(10) 28 00 00 78 cd d0 00 00 08 00
[20447.186026] blk_update_request: I/O error, dev sdb, sector 7917008 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[20447.186049] sd 2:0:0:0: [sdb] tag#16 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20447.186052] sd 2:0:0:0: [sdb] tag#16 CDB: Read(10) 28 00 00 78 cd e0 00 00 f0 00
[20447.186055] blk_update_request: I/O error, dev sdb, sector 7917024 op 0x0:(READ) flags 0x80700 phys_seg 30 prio class 0
[20447.186070] sd 2:0:0:0: [sdb] tag#17 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[20447.186073] sd 2:0:0:0: [sdb] tag#17 CDB: Read(10) 28 00 00 78 ce d0 00 01 00 00
[20447.186076] blk_update_request: I/O error, dev sdb, sector 7917264 op 0x0:(READ) flags 0x80700 phys_seg 32 prio class 0
[20447.186114] blk_update_request: I/O error, dev sdb, sector 454811904 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20447.186136] blk_update_request: I/O error, dev sdb, sector 7917008 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[20447.186143] Buffer I/O error on dev sdb3, logical block 828602, async page read
[20447.192348] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20447.192371] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20447.192377] Aborting journal on device sdb5-8.
[20447.192403] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20447.192414] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20447.195830] Buffer I/O error on dev sdb3, logical block 828602, async page read
[20447.200377] EXT4-fs warning (device sdb5): htree_dirblock_to_tree:997: inode #9044026: lblock 0: comm pool: error -5 reading directory block
[20447.201499] EXT4-fs warning (device sdb5): htree_dirblock_to_tree:997: inode #9044025: lblock 0: comm pool: error -5 reading directory block
[20447.202032] EXT4-fs warning (device sdb5): htree_dirblock_to_tree:997: inode #9044024: lblock 0: comm pool: error -5 reading directory block
[20447.202465] EXT4-fs warning (device sdb5): htree_dirblock_to_tree:997: inode #9044023: lblock 0: comm pool: error -5 reading directory block
[20447.202989] EXT4-fs warning (device sdb5): htree_dirblock_to_tree:997: inode #9044022: lblock 0: comm pool: error -5 reading directory block
[20447.204336] EXT4-fs warning (device sdb5): htree_dirblock_to_tree:997: inode #9044021: lblock 0: comm pool: error -5 reading directory block
[20447.205289] EXT4-fs warning (device sdb5): htree_dirblock_to_tree:997: inode #9044020: lblock 0: comm pool: error -5 reading directory block
[20447.205843] EXT4-fs warning (device sdb5): htree_dirblock_to_tree:997: inode #9044019: lblock 0: comm pool: error -5 reading directory block
[20447.206510] EXT4-fs warning (device sdb5): htree_dirblock_to_tree:997: inode #9044018: lblock 0: comm pool: error -5 reading directory block
[20447.207039] EXT4-fs warning (device sdb5): htree_dirblock_to_tree:997: inode #9044017: lblock 0: comm pool: error -5 reading directory block
[20447.207595] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #9044016: block 36175906: comm pool: unable to read itable block
[20447.207633] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20447.207645] EXT4-fs (sdb5): I/O error while writing superblock
[20447.207990] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #9044015: block 36175906: comm pool: unable to read itable block
[20447.208005] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20447.208012] EXT4-fs (sdb5): I/O error while writing superblock
[20447.208277] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #9044014: block 36175906: comm pool: unable to read itable block
[20447.208287] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20447.208291] EXT4-fs (sdb5): I/O error while writing superblock
[20447.208583] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #9044013: block 36175906: comm pool: unable to read itable block
[20447.208597] EXT4-fs (sdb5): I/O error while writing superblock
[20447.209804] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #9044012: block 36175906: comm pool: unable to read itable block
[20447.209817] EXT4-fs (sdb5): I/O error while writing superblock
[20447.210173] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #9044011: block 36175906: comm pool: unable to read itable block
[20447.210186] EXT4-fs (sdb5): I/O error while writing superblock
[20447.210497] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #9044010: block 36175906: comm pool: unable to read itable block
[20447.210509] EXT4-fs (sdb5): I/O error while writing superblock
[20447.210741] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #9044009: block 36175906: comm pool: unable to read itable block
[20447.210754] EXT4-fs (sdb5): I/O error while writing superblock
[20447.211042] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #9044008: block 36175906: comm pool: unable to read itable block
[20447.211054] EXT4-fs (sdb5): I/O error while writing superblock
[20447.211427] EXT4-fs error (device sdb5): __ext4_get_inode_loc:4703: inode #9044007: block 36175906: comm pool: unable to read itable block
[20447.211438] EXT4-fs (sdb5): I/O error while writing superblock
[20447.234963] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20447.473451] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20447.817695] usb 2-2: new SuperSpeed Gen 1 USB device number 48 using xhci_hcd
[20447.838486] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20447.838492] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20447.838496] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20447.838499] usb 2-2: Manufacturer: JMicron
[20447.838502] usb 2-2: SerialNumber: 0123456789ABCDEF
[20447.844055] scsi host2: uas
[20447.845997] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20447.847172] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20447.847789] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20447.847794] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20447.847958] sd 2:0:0:0: [sdb] Write Protect is off
[20447.847965] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20447.848291] sd 2:0:0:0: [sdb] Disabling FUA
[20447.848299] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20447.848642] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20447.881208]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20447.884086] sd 2:0:0:0: [sdb] Attached SCSI disk
[20448.321594] EXT4-fs (sdb5): recovery complete
[20448.321604] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20456.073462] usb 2-2: USB disconnect, device number 48
[20456.074576] print_req_error: 56 callbacks suppressed
[20456.074581] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20456.074589] buffer_io_error: 54 callbacks suppressed
[20456.074591] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20456.074647] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20456.086960] JBD2: Error while async write back metadata bh 0.
[20456.086961] Aborting journal on device sdb5-8.
[20456.086977] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20456.086979] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20456.086981] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20456.086984] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20456.105645] EXT4-fs (sdb5): previous I/O error to superblock detected
[20456.105655] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20456.105656] EXT4-fs (sdb5): I/O error while writing superblock
[20456.118374] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20456.357401] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20456.705570] usb 2-2: new SuperSpeed Gen 1 USB device number 49 using xhci_hcd
[20456.730694] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20456.730701] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20456.730706] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20456.730711] usb 2-2: Manufacturer: JMicron
[20456.730714] usb 2-2: SerialNumber: 0123456789ABCDEF
[20456.737881] scsi host2: uas
[20456.739147] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20456.741724] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20456.741730] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20456.741891] sd 2:0:0:0: [sdb] Write Protect is off
[20456.741898] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20456.742194] sd 2:0:0:0: [sdb] Disabling FUA
[20456.742202] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20456.742508] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20456.744368] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20456.782941]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20456.785975] sd 2:0:0:0: [sdb] Attached SCSI disk
[20456.994381] EXT4-fs (sdb5): recovery complete
[20456.996221] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20479.133296] usb 2-2: USB disconnect, device number 49
[20479.134537] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20479.134546] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20479.134605] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20479.149274] JBD2: Error while async write back metadata bh 0.
[20479.149276] Aborting journal on device sdb5-8.
[20479.149292] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20479.149294] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20479.149295] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20479.149299] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20479.183565] EXT4-fs (sdb5): previous I/O error to superblock detected
[20479.183582] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20479.183584] EXT4-fs (sdb5): I/O error while writing superblock
[20479.183857] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20479.429228] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20479.785423] usb 2-2: new SuperSpeed Gen 1 USB device number 50 using xhci_hcd
[20479.806356] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20479.806364] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20479.806368] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20479.806372] usb 2-2: Manufacturer: JMicron
[20479.806376] usb 2-2: SerialNumber: 0123456789ABCDEF
[20479.812056] scsi host2: uas
[20479.816497] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20479.818094] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[20479.819370] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20479.819378] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20479.819543] sd 2:0:0:0: [sdb] Write Protect is off
[20479.819550] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20479.819897] sd 2:0:0:0: [sdb] Disabling FUA
[20479.819905] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20479.820337] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20479.851675]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20479.853766] sd 2:0:0:0: [sdb] Attached SCSI disk
[20480.050452] EXT4-fs (sdb5): recovery complete
[20480.051348] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20513.069040] usb 2-2: USB disconnect, device number 50
[20513.070482] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20513.102097] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20513.105319] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20513.105324] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20513.105325] Aborting journal on device sdb5-8.
[20513.105327] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20513.105328] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20513.340932] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20513.677204] usb 2-2: new SuperSpeed Gen 1 USB device number 51 using xhci_hcd
[20513.698459] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20513.698464] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20513.698467] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20513.698470] usb 2-2: Manufacturer: JMicron
[20513.698472] usb 2-2: SerialNumber: 0123456789ABCDEF
[20513.703339] scsi host2: uas
[20513.704592] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20513.706405] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20513.706412] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20513.706554] sd 2:0:0:0: [sdb] Write Protect is off
[20513.706560] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20513.706564] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20513.706842] sd 2:0:0:0: [sdb] Disabling FUA
[20513.706849] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20513.707174] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20513.742428]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20513.745376] sd 2:0:0:0: [sdb] Attached SCSI disk
[20514.022839] EXT4-fs (sdb5): recovery complete
[20514.023662] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20515.865033] usb 2-2: USB disconnect, device number 51
[20515.871356] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20515.871370] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20515.871394] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20515.871405] Aborting journal on device sdb5-8.
[20515.871429] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20515.871446] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20515.871453] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20515.871471] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20515.960198] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20515.960203] EXT4-fs (sdb5): I/O error while writing superblock
[20515.960930] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20516.204966] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20516.537221] usb 2-2: new SuperSpeed Gen 1 USB device number 52 using xhci_hcd
[20516.557985] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20516.557991] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20516.557995] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20516.557998] usb 2-2: Manufacturer: JMicron
[20516.558001] usb 2-2: SerialNumber: 0123456789ABCDEF
[20516.563592] scsi host2: uas
[20516.565828] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20516.566930] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20516.567534] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20516.567540] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20516.567699] sd 2:0:0:0: [sdb] Write Protect is off
[20516.567705] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20516.568031] sd 2:0:0:0: [sdb] Disabling FUA
[20516.568039] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20516.568367] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20516.608108]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20516.610967] sd 2:0:0:0: [sdb] Attached SCSI disk
[20516.901155] EXT4-fs (sdb5): recovery complete
[20516.901158] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20528.324910] usb 2-2: USB disconnect, device number 52
[20528.326111] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20528.326120] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20528.326201] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20528.339329] JBD2: Error while async write back metadata bh 0.
[20528.339330] Aborting journal on device sdb5-8.
[20528.339345] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20528.339347] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20528.339349] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20528.339352] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20528.360198] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20528.596859] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20528.969060] usb 2-2: new SuperSpeed Gen 1 USB device number 53 using xhci_hcd
[20528.994195] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20528.994201] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20528.994204] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20528.994206] usb 2-2: Manufacturer: JMicron
[20528.994209] usb 2-2: SerialNumber: 0123456789ABCDEF
[20528.999873] scsi host2: uas
[20529.005096] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20529.006226] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[20529.007133] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20529.007140] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20529.007339] sd 2:0:0:0: [sdb] Write Protect is off
[20529.007345] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20529.007713] sd 2:0:0:0: [sdb] Disabling FUA
[20529.007720] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20529.008080] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20529.034785]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20529.036943] sd 2:0:0:0: [sdb] Attached SCSI disk
[20529.243391] EXT4-fs (sdb5): recovery complete
[20529.244732] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20532.752884] usb 2-2: USB disconnect, device number 53
[20532.754355] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20532.754369] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20532.754388] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20532.754393] Aborting journal on device sdb5-8.
[20532.754417] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20532.754425] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20532.754431] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20532.754441] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20532.785283] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20532.785292] EXT4-fs (sdb5): I/O error while writing superblock
[20532.793147] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20533.040850] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20533.404986] usb 2-2: new SuperSpeed Gen 1 USB device number 54 using xhci_hcd
[20533.425935] usb 2-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.05
[20533.425943] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[20533.425948] usb 2-2: Product: USB to ATA/ATAPI Bridge
[20533.425953] usb 2-2: Manufacturer: JMicron
[20533.425957] usb 2-2: SerialNumber: 0123456789ABCDEF
[20533.433596] scsi host2: uas
[20533.435933] scsi 2:0:0:0: Direct-Access     JMicron  Generic          0405 PQ: 0 ANSI: 6
[20533.437803] sd 2:0:0:0: Attached scsi generic sg2 type 0
[20533.437811] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[20533.437816] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[20533.438002] sd 2:0:0:0: [sdb] Write Protect is off
[20533.438009] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[20533.438390] sd 2:0:0:0: [sdb] Disabling FUA
[20533.438402] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[20533.438795] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[20533.468737]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
[20533.476678] sd 2:0:0:0: [sdb] Attached SCSI disk
[20533.711588] EXT4-fs (sdb5): recovery complete
[20533.711591] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[20541.756948] usb 2-2: USB disconnect, device number 54
[20541.758178] blk_update_request: I/O error, dev sdb, sector 165128192 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
[20541.758189] Buffer I/O error on dev sdb5, logical block 0, lost async page write
[20541.758284] blk_update_request: I/O error, dev sdb, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 0
[20541.772266] JBD2: Error while async write back metadata bh 0.
[20541.772267] Aborting journal on device sdb5-8.
[20541.772283] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20541.772285] blk_update_request: I/O error, dev sdb, sector 316385280 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0
[20541.772287] Buffer I/O error on dev sdb5, logical block 18907136, lost sync page write
[20541.772290] JBD2: Error -5 detected when updating journal superblock for sdb5-8.
[20541.793438] EXT4-fs (sdb5): previous I/O error to superblock detected
[20541.793444] Buffer I/O error on dev sdb5, logical block 0, lost sync page write
[20541.793445] EXT4-fs (sdb5): I/O error while writing superblock
[20541.797595] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[20542.068820] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[20561.404937] Fin  Trace UAS4 - Port 2