presence

esphome:
  name: ld2410b-mw-presence
  friendly_name: LD2410B mw presence

esp32:
  board: esp32-s2-saola-1
  variant: esp32s2

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "3ZvBgnUumHsG2AqwJOtZReCDlp4hlI/JW3WDD7/FZEI="

ota:
  - platform: esphome
    password: "b109060ece06c98231b79ff5fc70bb1e"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Ld2410B-Mw-Presence"
    password: "O2s6DuzguWyl"

uart:
  tx_pin: GPIO17   # → RX senzoru
  rx_pin: GPIO18   # → TX senzoru
  baud_rate: 256000
  parity: NONE
  stop_bits: 1

ld2410:

# Senzory
sensor:
  - platform: ld2410
    light:
      name: Light
    moving_distance:
      name: Moving Distance
    still_distance:
      name: Still Distance
    moving_energy:
      name: Move Energy
    still_energy:
      name: Still Energy
    detection_distance:
      name: Detection Distance
    g0:
      move_energy:
        name: G0 move energy
      still_energy:
        name: G0 still energy
    g1:
      move_energy:
        name: G1 move energy
      still_energy:
        name: G1 still energy
    g2:
      move_energy:
        name: G2 move energy
      still_energy:
        name: G2 still energy
    g3:
      move_energy:
        name: G3 move energy
      still_energy:
        name: G3 still energy
    g4:
      move_energy:
        name: G4 move energy
      still_energy:
        name: G4 still energy
    g5:
      move_energy:
        name: G5 move energy
      still_energy:
        name: G5 still energy
    g6:
      move_energy:
        name: G6 move energy
      still_energy:
        name: G6 still energy
    g7:
      move_energy:
        name: G7 move energy
      still_energy:
        name: G7 still energy
    g8:
      move_energy:
        name: G8 move energy
      still_energy:
        name: G8 still energy






binary_sensor:
  - platform: ld2410
    has_target:
      name: Presence
    has_moving_target:
      name: Moving Target
    has_still_target:
      name: Still Target
    out_pin_presence_status:
      name: Out pin presence status

number:
  - platform: ld2410
    timeout:
      name: Timeout
    light_threshold:
      name: Light threshold
    max_move_distance_gate:
      name: Max move distance gate
    max_still_distance_gate:
      name: Max still distance gate
    g0:
      move_threshold:
        name: G0 move threshold
      still_threshold:
        name: G0 still threshold
    g1:
      move_threshold:
        name: G1 move threshold
      still_threshold:
        name: G1 still threshold
    g2:
      move_threshold:
        name: G2 move threshold
      still_threshold:
        name: G2 still threshold
    g3:
      move_threshold:
        name: G3 move threshold
      still_threshold:
        name: G3 still threshold
    g4:
      move_threshold:
        name: G4 move threshold
      still_threshold:
        name: G4 still threshold
    g5:
      move_threshold:
        name: G5 move threshold
      still_threshold:
        name: G5 still threshold
    g6:
      move_threshold:
        name: G6 move threshold
      still_threshold:
        name: G6 still threshold
    g7:
      move_threshold:
        name: G7 move threshold
      still_threshold:
        name: G7 still threshold
    g8:
      move_threshold:
        name: G8 move threshold
      still_threshold:
        name: G8 still threshold


select:
  - platform: ld2410
    distance_resolution:
      name: Distance resolution
    light_function:
      name: Light function


switch:
  - platform: ld2410
    engineering_mode:
      name: Engineering mode

captive_portal: