API tools faq
paste
Advertisement
Guest User

BPI-M64-Manjaro

a guest
Nov 10th, 2019
483
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 62.20 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2019.01-1-00035-g64abfc9b6b (Jan 11 2019 - 19:47:34 +0000)
  2. DRAM: 2048 MiB
  3. Trying to boot from MMC1
  4. NOTICE: BL31: v2.0(debug):v2.0-517-g63b9b542-dirty
  5. NOTICE: BL31: Built : 19:47:34, Jan 11 2019
  6. NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
  7. NOTICE: BL31: Found U-Boot DTB at 0x4080108, model: Pine64+
  8. INFO: ARM GICv2 driver initialized
  9. INFO: Configuring SPC Controller
  10. NOTICE: BL31: PMIC: Detected AXP803 on RSB.
  11. INFO: PMIC: AXP803: dcdc1 voltage: 3.300V
  12. INFO: PMIC: AXP803: dcdc5 voltage: 1.360V
  13. INFO: PMIC: AXP803: dcdc6 voltage: 1.100V
  14. INFO: PMIC: AXP803: dldo1 voltage: 3.300V
  15. INFO: PMIC: AXP803: Enabling DC1SW
  16. INFO: BL31: Platform setup done
  17. INFO: BL31: Initializing runtime services
  18. INFO: BL31: cortex_a53: CPU workaround for 843419 was applied
  19. INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
  20. INFO: BL31: Preparing for EL3 exit to normal world
  21. INFO: Entry point address = 0x4a000000
  22. INFO: SPSR = 0x3c9
  23.  
  24.  
  25. U-Boot 2019.01-1-00035-g64abfc9b6b (Jan 11 2019 - 19:47:34 +0000) Arch Linux
  26. ARM
  27.  
  28. CPU: Allwinner A64 (SUN50I)
  29. Model: Pine64+
  30. DRAM: 2 GiB
  31. MMC: SUNXI SD/MMC: 0
  32. Loading Environment from FAT... Unable to use mmc 0:1... In: serial
  33. Out: vidconsole
  34. Err: vidconsole
  35. Net: phy interface7
  36. eth0: ethernet@1c30000
  37. starting USB...
  38. USB0: USB EHCI 1.00
  39. USB1: USB OHCI 1.0
  40. USB2: USB EHCI 1.00
  41. USB3: USB OHCI 1.0
  42. scanning bus 0 for devices... 1 USB Device(s) found
  43. scanning bus 2 for devices... 2 USB Device(s) found
  44. scanning usb for storage devices... 0 Storage Device(s) found
  45. Hit any key to stop autoboot: 0
  46. switch to partitions #0, OK
  47. mmc0 is current device
  48. Scanning mmc 0:1...
  49. Found U-Boot script /boot.scr
  50. 963 bytes read in 5 ms (187.5 KiB/s)
  51. ## Executing script at 4fc00000
  52. 23923200 bytes read in 9877 ms (2.3 MiB/s)
  53. ** File not found initrd.img **
  54. 26814 bytes read in 4 ms (6.4 MiB/s)
  55. ## Flattened Device Tree blob at 4fa00000
  56. Booting using the fdt blob at 0x4fa00000
  57. EHCI failed to shut down host controller.
  58. EHCI failed to shut down host controller.
  59. Loading Ramdisk to 4892f000, end 49fffa00 ... OK
  60. Loading Device Tree to 0000000048925000, end 000000004892e8bd ... OK
  61.  
  62. Starting kernel ...
  63.  
  64. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  65. [ 0.000000] Linux version 5.3.0-3-MANJARO-ARM (root@aarch64) (gcc version
  66. 9.1.0 (GCC)) #1 SMP Sat Oct 12 11:05:00 UTC 2019
  67. [ 0.000000] Machine model: BananaPi-M64
  68. [ 0.000000] efi: Getting EFI parameters from FDT:
  69. [ 0.000000] efi: UEFI not found.
  70. [ 0.000000] cma: Reserved 64 MiB at 0x00000000ba000000
  71. [ 0.000000] psci: probing for conduit method from DT.
  72. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  73. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  74. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  75. [ 0.000000] psci: SMC Calling Convention v1.1
  76. [ 0.000000] percpu: Embedded 43 pages/cpu s138264 r8192 d29672 u176128
  77. [ 0.000000] Detected VIPT I-cache on CPU0
  78. [ 0.000000] CPU features: detected: ARM erratum 843419
  79. [ 0.000000] Speculative Store Bypass Disable mitigation not required
  80. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 508032
  81. [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/de
  82. v/mmcblk0p2 rw rootfstype=ext4 rootwait fsck.repair=yes panic=10
  83. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 byt
  84. es, linear)
  85. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 byte
  86. s, linear)
  87. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  88. [ 0.000000] Memory: 1894528K/2064384K available (14076K kernel code, 1858K
  89. rwdata, 5748K rodata, 1600K init, 16715K bss, 104320K reserved, 65536K cma-r
  90. eserved)
  91. [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x8
  92. 8/0x158 with crng_init=0
  93. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  94. [ 0.000000] ftrace: allocating 48808 entries in 191 pages
  95. [ 0.000000] rcu: Hierarchical RCU implementation.
  96. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  97. [ 0.000000] Tasks RCU enabled.
  98. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10
  99. jiffies.
  100. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  101. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  102. [ 0.000000] GIC: Using split EOI/Deactivate mode
  103. [ 0.000000] arch_timer: Enabling global workaround for Allwinner erratum U
  104. NKNOWN1
  105. [ 0.000000] arch_timer: CPU0: Trapping CNTVCT access
  106. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  107. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycl
  108. es: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  109. [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 43
  110. 98046511097ns
  111. [ 0.000385] Console: colour dummy device 80x25
  112. [ 0.000430] Calibrating delay loop (skipped), value calculated using timer
  113. frequency.. 48.00 BogoMIPS (lpj=240000)
  114. [ 0.000442] pid_max: default: 32768 minimum: 301
  115. [ 0.000639] LSM: Security Framework initializing
  116. [ 0.000658] Yama: becoming mindful.
  117. [ 0.000752] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, l
  118. inear)
  119. [ 0.000774] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 byt
  120. es, linear)
  121. [ 0.002532] ASID allocator initialised with 32768 entries
  122. [ 0.002632] rcu: Hierarchical SRCU implementation.
  123. [ 0.005055] EFI services will not be available.
  124. [ 0.005360] smp: Bringing up secondary CPUs ...
  125. [ 0.006812] Detected VIPT I-cache on CPU1
  126. [ 0.006870] arch_timer: CPU1: Trapping CNTVCT access
  127. [ 0.006881] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  128. [ 0.008025] Detected VIPT I-cache on CPU2
  129. [ 0.008056] arch_timer: CPU2: Trapping CNTVCT access
  130. [ 0.008064] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  131. [ 0.009038] Detected VIPT I-cache on CPU3
  132. [ 0.009064] arch_timer: CPU3: Trapping CNTVCT access
  133. [ 0.009072] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  134. [ 0.009157] smp: Brought up 1 node, 4 CPUs
  135. [ 0.009183] SMP: Total of 4 processors activated.
  136. [ 0.009191] CPU features: detected: 32-bit EL0 Support
  137. [ 0.009199] CPU features: detected: CRC32 instructions
  138. [ 0.009740] CPU: All CPU(s) started at EL2
  139. [ 0.009763] alternatives: patching kernel code
  140. [ 0.011944] devtmpfs: initialized
  141. [ 0.019219] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
  142. max_idle_ns: 19112604462750000 ns
  143. [ 0.019245] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  144. [ 0.022141] pinctrl core: initialized pinctrl subsystem
  145. [ 0.023017] DMI not present or invalid.
  146. [ 0.023400] NET: Registered protocol family 16
  147. [ 0.024891] cpuidle: using governor ladder
  148. [ 0.025009] cpuidle: using governor menu
  149. [ 0.025302] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  150. [ 0.027012] DMA: preallocated 256 KiB pool for atomic allocations
  151. [ 0.027239] Serial: AMBA PL011 UART driver
  152. [ 0.047188] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  153. [ 0.047203] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  154. [ 0.047211] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  155. [ 0.047218] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  156. [ 1.654812] cryptd: max_cpu_qlen set to 1000
  157. [ 1.666387] alg: No test for lzo-rle (lzo-rle-generic)
  158. [ 1.666604] alg: No test for lzo-rle (lzo-rle-scomp)
  159. [ 1.682421] ACPI: Interpreter disabled.
  160. [ 1.682756] vgaarb: loaded
  161. [ 1.683676] SCSI subsystem initialized
  162. [ 1.684092] usbcore: registered new interface driver usbfs
  163. [ 1.684145] usbcore: registered new interface driver hub
  164. [ 1.684203] usbcore: registered new device driver usb
  165. [ 1.684479] mc: Linux media interface: v0.10
  166. [ 1.684519] videodev: Linux video capture interface: v2.00
  167. [ 1.684566] pps_core: LinuxPPS API ver. 1 registered
  168. [ 1.684572] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Gi
  169. ometti <[email protected]>
  170. [ 1.684589] PTP clock support registered
  171. [ 1.684772] EDAC MC: Ver: 3.0.0
  172. [ 1.685369] Advanced Linux Sound Architecture Driver Initialized.
  173. [ 1.685925] NetLabel: Initializing
  174. [ 1.685932] NetLabel: domain hash size = 128
  175. [ 1.685937] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  176. [ 1.686006] NetLabel: unlabeled traffic allowed by default
  177. [ 1.686487] clocksource: Switched to clocksource arch_sys_counter
  178. [ 2.730451] VFS: Disk quotas dquot_6.6.0
  179. [ 2.730537] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  180. [ 2.731442] pnp: PnP ACPI: disabled
  181. [ 2.738371] thermal_sys: Registered thermal governor 'fair_share'
  182. [ 2.738376] thermal_sys: Registered thermal governor 'bang_bang'
  183. [ 2.738387] thermal_sys: Registered thermal governor 'step_wise'
  184. [ 2.738393] thermal_sys: Registered thermal governor 'user_space'
  185. [ 2.738399] thermal_sys: Registered thermal governor 'power_allocator'
  186. [ 2.739198] NET: Registered protocol family 2
  187. [ 2.739792] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 1
  188. 6384 bytes, linear)
  189. [ 2.739844] TCP established hash table entries: 16384 (order: 5, 131072 by
  190. tes, linear)
  191. [ 2.740007] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, li
  192. near)
  193. [ 2.740329] TCP: Hash tables configured (established 16384 bind 16384)
  194. [ 2.740469] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  195. [ 2.740532] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, line
  196. ar)
  197. [ 2.740773] NET: Registered protocol family 1
  198. [ 2.741393] RPC: Registered named UNIX socket transport module.
  199. [ 2.741401] RPC: Registered udp transport module.
  200. [ 2.741407] RPC: Registered tcp transport module.
  201. [ 2.741412] RPC: Registered tcp NFSv4.1 backchannel transport module.
  202. [ 2.741426] PCI: CLS 0 bytes, default 64
  203. [ 2.741608] Trying to unpack rootfs image as initramfs...
  204. [ 2.741622] Initramfs unpacking failed: invalid magic at start of compress
  205. ed archive
  206. [ 2.758953] Freeing initrd memory: 23360K
  207. [ 2.759834] kvm [1]: IPA Size Limit: 40bits
  208. [ 2.762615] kvm [1]: vgic interrupt IRQ1
  209. [ 2.762760] kvm [1]: Hyp mode initialized successfully
  210. [ 2.819061] Initialise system trusted keyrings
  211. [ 2.819214] workingset: timestamp_bits=46 max_order=19 bucket_order=0
  212. [ 2.826196] zbud: loaded
  213. [ 2.828822] NFS: Registering the id_resolver key type
  214. [ 2.828854] Key type id_resolver registered
  215. [ 2.828860] Key type id_legacy registered
  216. [ 2.828875] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  217. [ 2.828909] ntfs: driver 2.1.32 [Flags: R/W].
  218. [ 2.829417] fuse: init (API version 7.31)
  219. [ 2.829826] SGI XFS with ACLs, security attributes, no debug enabled
  220. [ 2.852166] NET: Registered protocol family 38
  221. [ 2.852189] Key type asymmetric registered
  222. [ 2.852197] Asymmetric key parser 'x509' registered
  223. [ 2.852249] Block layer SCSI generic (bsg) driver version 0.4 loaded (majo
  224. r 244)
  225. [ 2.852395] io scheduler mq-deadline registered
  226. [ 2.852404] io scheduler kyber registered
  227. [ 2.852705] atomic64_test: passed
  228. [ 2.852939] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device
  229. [ 2.853542] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
  230. [ 2.857042] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO dr
  231. iver
  232. [ 2.858519] IPMI message handler: version 39.2
  233. [ 2.867386] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  234. [ 2.876767] libphy: Fixed MDIO Bus: probed
  235. [ 2.877404] usbcore: registered new interface driver asix
  236. [ 2.877451] usbcore: registered new interface driver ax88179_178a
  237. [ 2.878719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  238. [ 2.878735] ehci-pci: EHCI PCI platform driver
  239. [ 2.878781] ehci-platform: EHCI generic platform driver
  240. [ 2.879001] ehci-platform 1c1a000.usb: EHCI Host Controller
  241. [ 2.879156] ehci-platform 1c1a000.usb: new USB bus registered, assigned bu
  242. s number 1
  243. [ 2.879300] ehci-platform 1c1a000.usb: irq 15, io mem 0x01c1a000
  244. [ 2.906500] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
  245. [ 2.906720] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
  246. bcdDevice= 5.03
  247. [ 2.906731] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumb
  248. er=1
  249. [ 2.906740] usb usb1: Product: EHCI Host Controller
  250. [ 2.906749] usb usb1: Manufacturer: Linux 5.3.0-3-MANJARO-ARM ehci_hcd
  251. [ 2.906757] usb usb1: SerialNumber: 1c1a000.usb
  252. [ 2.907239] hub 1-0:1.0: USB hub found
  253. [ 2.907275] hub 1-0:1.0: 1 port detected
  254. [ 2.907934] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  255. [ 2.907953] ohci-pci: OHCI PCI platform driver
  256. [ 2.908027] ohci-platform: OHCI generic platform driver
  257. [ 2.908203] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
  258. [ 2.908366] ohci-platform 1c1a400.usb: new USB bus registered, assigned bu
  259. s number 2
  260. [ 2.908470] ohci-platform 1c1a400.usb: irq 16, io mem 0x01c1a400
  261. [ 2.980707] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001,
  262. bcdDevice= 5.03
  263. [ 2.980718] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumb
  264. er=1
  265. [ 2.980727] usb usb2: Product: Generic Platform OHCI controller
  266. [ 2.980736] usb usb2: Manufacturer: Linux 5.3.0-3-MANJARO-ARM ohci_hcd
  267. [ 2.980744] usb usb2: SerialNumber: 1c1a400.usb
  268. [ 2.981199] hub 2-0:1.0: USB hub found
  269. [ 2.981245] hub 2-0:1.0: 1 port detected
  270. [ 2.981883] uhci_hcd: USB Universal Host Controller Interface driver
  271. [ 2.982443] usbcore: registered new interface driver uas
  272. [ 2.982534] usbcore: registered new interface driver usb-storage
  273. [ 2.982571] usbcore: registered new interface driver ums-alauda
  274. [ 2.982607] usbcore: registered new interface driver ums-cypress
  275. [ 2.982649] usbcore: registered new interface driver ums-datafab
  276. [ 2.982686] usbcore: registered new interface driver ums_eneub6250
  277. [ 2.982730] usbcore: registered new interface driver ums-freecom
  278. [ 2.982768] usbcore: registered new interface driver ums-isd200
  279. [ 2.982803] usbcore: registered new interface driver ums-jumpshot
  280. [ 2.982838] usbcore: registered new interface driver ums-karma
  281. [ 2.982874] usbcore: registered new interface driver ums-onetouch
  282. [ 2.982928] usbcore: registered new interface driver ums-realtek
  283. [ 2.982965] usbcore: registered new interface driver ums-sddr09
  284. [ 2.983002] usbcore: registered new interface driver ums-sddr55
  285. [ 2.983039] usbcore: registered new interface driver ums-usbat
  286. [ 2.983138] usbcore: registered new interface driver usbserial_generic
  287. [ 2.983170] usbserial: USB Serial support registered for generic
  288. [ 2.983501] musb-sunxi 1c19000.usb: Invalid or missing 'dr_mode' property
  289. [ 2.983518] musb-sunxi: probe of 1c19000.usb failed with error -22
  290. [ 2.984711] mousedev: PS/2 mouse device common for all mice
  291. [ 2.985472] sun6i-rtc 1f00000.rtc: registered as rtc0
  292. [ 2.985482] sun6i-rtc 1f00000.rtc: RTC enabled
  293. [ 2.987460] device-mapper: uevent: version 1.0.3
  294. [ 2.987767] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: d
  295. [email protected]
  296. [ 2.988676] sun50i-a64-r-pinctrl 1f02c00.pinctrl: 1f02c00.pinctrl supply v
  297. cc-pl not found, using dummy regulator
  298. [ 2.988997] sdhci: Secure Digital Host Controller Interface driver
  299. [ 2.989003] sdhci: Copyright(c) Pierre Ossman
  300. [ 2.989562] Synopsys Designware Multimedia Card Interface Driver
  301. [ 2.990398] sdhci-pltfm: SDHCI platform and OF driver helper
  302. [ 2.991012] ledtrig-cpu: registered to indicate activity on CPUs
  303. [ 2.991279] hidraw: raw HID events driver (C) Jiri Kosina
  304. [ 2.991403] usbcore: registered new interface driver usbhid
  305. [ 2.991408] usbhid: USB HID core driver
  306. [ 2.995329] drop_monitor: Initializing network drop monitor service
  307. [ 2.995579] Initializing XFRM netlink socket
  308. [ 2.996310] NET: Registered protocol family 10
  309. [ 3.000728] Segment Routing with IPv6
  310. [ 3.000821] mip6: Mobile IPv6
  311. [ 3.000833] NET: Registered protocol family 17
  312. [ 3.000923] Key type dns_resolver registered
  313. [ 3.001853] registered taskstats version 1
  314. [ 3.001861] Loading compiled-in X.509 certificates
  315. [ 3.001983] zswap: loaded using pool lzo/zbud
  316. [ 3.002239] Key type big_key registered
  317. [ 3.003637] Key type encrypted registered
  318. [ 3.047614] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer
  319. _ops)
  320. [ 3.049543] sun4i-drm display-engine: bound 1200000.mixer (ops sun8i_mixer
  321. _ops)
  322. [ 3.049997] sun4i-drm display-engine: No panel or bridge found... RGB outp
  323. ut disabled
  324. [ 3.050017] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops su
  325. n4i_tcon_ops)
  326. [ 3.050223] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops su
  327. n4i_tcon_ops)
  328. [ 3.050286] sun8i-dw-hdmi 1ee0000.hdmi: Couldn't get regulator
  329. [ 3.050308] sun4i-drm display-engine: failed to bind 1ee0000.hdmi (ops sun
  330. 8i_dw_hdmi_ops): -517
  331. [ 3.050601] sun4i-drm display-engine: Couldn't bind all pipelines componen
  332. ts
  333. [ 3.050732] sun4i-drm display-engine: master bind failed: -517
  334. [ 3.051335] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
  335. [ 3.051731] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found
  336. [ 3.054797] axp20x-adc axp813-adc: DMA mask not set
  337. [ 3.055630] axp20x-battery-power-supply axp20x-battery-power-supply: DMA m
  338. ask not set
  339. [ 3.055856] power_supply axp20x-battery: hwmon: 'axp20x-battery' is not a
  340. valid name attribute, please fix
  341. [ 3.056407] axp20x-ac-power-supply axp20x-ac-power-supply: DMA mask not se
  342. t
  343. [ 3.056607] power_supply axp813-ac: hwmon: 'axp813-ac' is not a valid name
  344. attribute, please fix
  345. [ 3.057896] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not
  346. set
  347. [ 3.058051] power_supply axp20x-usb: hwmon: 'axp20x-usb' is not a valid na
  348. me attribute, please fix
  349. [ 3.059346] dcdc1: supplied by regulator-dummy
  350. [ 3.059748] dcdc2: supplied by regulator-dummy
  351. [ 3.060009] dcdc4: supplied by regulator-dummy
  352. [ 3.060258] dcdc5: supplied by regulator-dummy
  353. [ 3.060353] vcc-dram: Bringing 1360000uV into 1500000-1500000uV
  354. [ 3.060603] dcdc6: supplied by regulator-dummy
  355. [ 3.060869] dc1sw: supplied by regulator-dummy
  356. [ 3.061101] aldo1: supplied by regulator-dummy
  357. [ 3.061196] afvcc-csi: Bringing 3300000uV into 2800000-2800000uV
  358. [ 3.061474] aldo2: supplied by regulator-dummy
  359. [ 3.061724] aldo3: supplied by regulator-dummy
  360. [ 3.061992] dldo1: supplied by regulator-dummy
  361. [ 3.062266] dldo2: supplied by regulator-dummy
  362. [ 3.062332] vcc-wifi: Bringing 2900000uV into 3300000-3300000uV
  363. [ 3.062568] dldo3: supplied by regulator-dummy
  364. [ 3.062831] dldo4: supplied by regulator-dummy
  365. [ 3.063127] eldo1: supplied by regulator-dummy
  366. [ 3.063384] eldo2: supplied by regulator-dummy
  367. [ 3.063651] eldo3: supplied by regulator-dummy
  368. [ 3.063939] fldo1: supplied by regulator-dummy
  369. [ 3.064209] fldo2: supplied by regulator-dummy
  370. [ 3.064484] rtc-ldo: supplied by regulator-dummy
  371. [ 3.064727] ldo-io0: supplied by regulator-dummy
  372. [ 3.064980] ldo-io1: supplied by regulator-dummy
  373. [ 3.065280] drivevbus: supplied by regulator-dummy
  374. [ 3.065484] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
  375. [ 3.065723] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
  376. [ 3.070594] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driv
  377. er
  378. [ 3.070933] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc
  379. -pb not found, using dummy regulator
  380. [ 3.071402] printk: console [ttyS0] disabled
  381. [ 3.092069] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 25, base_baud =
  382. 1500000) is a U6_16550A
  383. [ 4.628075] printk: console [ttyS0] enabled
  384. [ 4.633162] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc
  385. -pg not found, using dummy regulator
  386. [ 4.664219] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 26, base_baud =
  387. 1500000) is a U6_16550A
  388. [ 4.673324] serial serial0: tty port ttyS1 registered
  389. [ 4.679112] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc
  390. -pd not found, using dummy regulator
  391. [ 4.689387] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
  392. [ 4.695432] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the
  393. default 6 (expect 0)
  394. [ 4.704063] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register suppo
  395. rted
  396. [ 4.711287] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine suppo
  397. rted
  398. [ 4.718510] dwmac-sun8i 1c30000.ethernet: COE Type 2
  399. [ 4.723468] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
  400. [ 4.730259] dwmac-sun8i 1c30000.ethernet: Normal descriptors
  401. [ 4.735911] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
  402. [ 4.741710] libphy: stmmac: probed
  403. [ 4.748414] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc
  404. -ph not found, using dummy regulator
  405. [ 4.759588] thermal thermal_zone0: failed to read out thermal zone (-16)
  406. [ 4.766323] thermal thermal_zone1: failed to read out thermal zone (-16)
  407. [ 4.773069] thermal thermal_zone2: failed to read out thermal zone (-16)
  408. [ 4.781455] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 79200
  409. 0 KHz
  410. [ 4.791788] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency chan
  411. ged to: 816000 KHz
  412. [ 4.800481] thermal thermal_zone0: failed to read out thermal zone (-16)
  413. [ 4.809668] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc
  414. -pf not found, using dummy regulator
  415. [ 4.820206] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  416. [ 4.851658] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 K
  417. B, uses new timings mode
  418. [ 4.862215] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
  419. [ 4.893128] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 K
  420. B, uses new timings mode
  421. [ 4.903208] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc
  422. -pc not found, using dummy regulator
  423. [ 4.930416] mmc0: new high speed SDHC card at address aaaa
  424. [ 4.942083] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  425. [ 4.959114] mmcblk0: mmc0:aaaa SS16G 14.8 GiB
  426. [ 4.963561] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  427. [ 4.969082] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB
  428. , uses new timings mode
  429. [ 4.978958] sun50i-a64-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc
  430. -pe not found, using dummy regulator
  431. [ 4.989859] simple-framebuffer be000000.framebuffer: framebuffer at 0xbe00
  432. 0000, 0x7e9000 bytes, mapped to 0x(____ptrval____)
  433. [ 5.001080] simple-framebuffer be000000.framebuffer: format=x8r8g8b8, mode
  434. =1920x1080x32, linelength=7680
  435. [ 5.010621] mmcblk0: p1 p2
  436. [ 5.014635] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  437. [ 5.049952] Console: switching to colour frame buffer device 240x67
  438. [ 5.081268] simple-framebuffer be000000.framebuffer: fb0: simplefb registe
  439. red!
  440. [ 5.089099] random: fast init done
  441. [ 5.090421] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer
  442. _ops)
  443. [ 5.101247] sun4i-drm display-engine: bound 1200000.mixer (ops sun8i_mixer
  444. _ops)
  445. [ 5.108866] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  446. [ 5.114419] sun4i-drm display-engine: No panel or bridge found... RGB outp
  447. ut disabled
  448. [ 5.122269] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops su
  449. n4i_tcon_ops)
  450. [ 5.130423] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops su
  451. n4i_tcon_ops)
  452. [ 5.144509] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a
  453. with HDCP (sun8i_dw_hdmi_phy)
  454. [ 5.154369] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus
  455. driver
  456. [ 5.162265] sun4i-drm display-engine: bound 1ee0000.hdmi (ops sun8i_dw_hdm
  457. i_ops)
  458. [ 5.169683] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  459. [ 5.176286] [drm] No driver support for vblank timestamp query.
  460. [ 5.182223] fb0: switching to sun4i-drm-fb from simple
  461. [ 5.190589] Console: switching to colour dummy device 80x25
  462. [ 5.196633] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine
  463. on minor 0
  464. [ 5.234928] mmc2: new DDR MMC card at address 0001
  465. [ 5.241216] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB
  466. [ 5.246765] mmcblk2boot0: mmc2:0001 8GTF4R partition 1 4.00 MiB
  467. [ 5.253661] mmcblk2boot1: mmc2:0001 8GTF4R partition 2 4.00 MiB
  468. [ 5.311301] mmc1: new high speed SDIO card at address 0001
  469. [ 5.758720] Console: switching to colour frame buffer device 240x67
  470. [ 5.806057] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer dev
  471. ice
  472. [ 5.814522] ehci-platform 1c1b000.usb: EHCI Host Controller
  473. [ 5.820323] ehci-platform 1c1b000.usb: new USB bus registered, assigned bu
  474. s number 3
  475. [ 5.828160] ehci-platform 1c1b000.usb: irq 17, io mem 0x01c1b000
  476. [ 5.859157] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
  477. [ 5.865548] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002,
  478. bcdDevice= 5.03
  479. [ 5.873833] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumb
  480. er=1
  481. [ 5.881068] usb usb3: Product: EHCI Host Controller
  482. [ 5.885943] usb usb3: Manufacturer: Linux 5.3.0-3-MANJARO-ARM ehci_hcd
  483. [ 5.892478] usb usb3: SerialNumber: 1c1b000.usb
  484. [ 5.900539] hub 3-0:1.0: USB hub found
  485. [ 5.904306] hub 3-0:1.0: 1 port detected
  486. [ 5.908953] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
  487. [ 5.915697] ohci-platform 1c1b400.usb: new USB bus registered, assigned bu
  488. s number 4
  489. [ 5.923548] ohci-platform 1c1b400.usb: irq 18, io mem 0x01c1b400
  490. [ 6.000851] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001,
  491. bcdDevice= 5.03
  492. [ 6.009130] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumb
  493. er=1
  494. [ 6.016345] usb usb4: Product: Generic Platform OHCI controller
  495. [ 6.022280] usb usb4: Manufacturer: Linux 5.3.0-3-MANJARO-ARM ohci_hcd
  496. [ 6.028815] usb usb4: SerialNumber: 1c1b400.usb
  497. [ 6.037306] hub 4-0:1.0: USB hub found
  498. [ 6.041070] hub 4-0:1.0: 1 port detected
  499. [ 6.045316] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01T00:0
  500. 0:20 UTC (20)
  501. [ 6.053578] cpvdd: disabling
  502. [ 6.056498] ALSA device list:
  503. [ 6.059462] No soundcards found.
  504. [ 6.063122] md: Waiting for all devices to be available before autodetect
  505. [ 6.069914] md: If you don't use raid, use raid=noautodetect
  506. [ 6.076059] md: Autodetecting RAID arrays.
  507. [ 6.080278] md: autorun ...
  508. [ 6.083065] md: ... autorun DONE.
  509. [ 6.111130] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode
  510. . Opts: (null)
  511. [ 6.119331] VFS: Mounted root (ext4 filesystem) on device 179:2.
  512. [ 6.137182] devtmpfs: mounted
  513. [ 6.143266] Freeing unused kernel memory: 1600K
  514. [ 6.149935] Run /sbin/init as init process
  515. [ 6.286562] usb 3-1: new high-speed USB device number 2 using ehci-platfor
  516. m
  517. [ 6.487205] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101,
  518. bcdDevice= 1.11
  519. [ 6.495384] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumbe
  520. r=0
  521. [ 6.502556] usb 3-1: Product: USB 2.0 Hub
  522. [ 6.507326] hub 3-1:1.0: USB hub found
  523. [ 6.511189] hub 3-1:1.0: 4 ports detected
  524. [ 6.724111] systemd[1]: System time before build time, advancing clock.
  525. [ 6.760249] systemd[1]: systemd 243.78-2-arch running in system mode. (+PA
  526. M +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYP
  527. T +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 def
  528. ault-hierarchy=hybrid)
  529. [ 6.782927] systemd[1]: Detected architecture arm64.
  530.  
  531. Welcome to Manjaro ARM!
  532.  
  533. [ 6.850174] systemd[1]: Set hostname to <Manjaro-BPI-M64>.
  534. [ 7.537242] random: systemd: uninitialized urandom read (16 bytes read)
  535. [ 7.546718] systemd[1]: Created slice system-getty.slice.
  536. [ OK ] Created slice system-getty.slice.
  537. [ 7.576634] random: systemd: uninitialized urandom read (16 bytes read)
  538. [ 7.584896] systemd[1]: Created slice system-serial\x2dgetty.slice.
  539. [ OK ] Created slice system-serial\x2dgetty.slice.
  540. [ 7.619707] random: systemd: uninitialized urandom read (16 bytes read)
  541. [ 7.627928] systemd[1]: Created slice User and Session Slice.
  542. [ OK ] Created slice User and Session Slice.
  543. [ 7.656923] systemd[1]: Started Dispatch Password Requests to Console Dire
  544. ctory Watch.
  545. [ OK ] Started Dispatch Password …ts to Console Directory Watch.
  546. [ 7.697065] systemd[1]: Started Forward Password Requests to Wall Director
  547. y Watch.
  548. [ OK ] Started Forward Password R…uests to Wall Directory Watch.
  549. [ 7.740135] systemd[1]: Set up automount Arbitrary Executable File Formats
  550. File System Automount Point.
  551. [ OK ] Set up automount Arbitrary…s File System Automount Point.
  552. [ 7.788079] systemd[1]: Reached target Local Encrypted Volumes.
  553. [ OK ] Reached target Local Encrypted Volumes.
  554. [ OK ] Reached target Paths.
  555. [ OK ] Reached target Remote Encrypted Volumes.
  556. [ OK ] Reached target Remote File Systems.
  557. [ OK ] Reached target Slices.
  558. [ OK ] Reached target Swap.
  559. [ OK ] Listening on Device-mapper event daemon FIFOs.
  560. [ OK ] Listening on Process Core Dump Socket.
  561. [ OK ] Listening on initctl Compatibility Named Pipe.
  562. [ OK ] Listening on Journal Socket (/dev/log).
  563. [ OK ] Listening on Journal Socket.
  564. [ OK ] Listening on Network Service Netlink Socket.
  565. [ OK ] Listening on udev Control Socket.
  566. [ OK ] Listening on udev Kernel Socket.
  567. Mounting Huge Pages File System...
  568. Mounting POSIX Message Queue File System...
  569. Mounting Kernel Debug File System...
  570. Mounting Temporary Directory (/tmp)...
  571. Starting Create list of st…odes for the current kernel...
  572. Mounting FUSE Control File System...
  573. Mounting Kernel Configuration File System...
  574. Starting Remount Root and Kernel File Systems...
  575. Starting Apply Kernel Variables...
  576. Starting udev Coldplug all Devices...
  577. [ OK ] Mounted Huge Pages File System.
  578. [ OK ] Mounted POSIX Message Queue File System.
  579. [ OK ] Mounted Kernel Debug File System.
  580. [ OK ] Mounted Temporary Directory (/tmp).
  581. [ OK ] Started Create list of sta… nodes for the current kernel.
  582. [ OK ] Mounted FUSE Control File System.
  583. [ OK ] Mounted Kernel Configuration File System.
  584. [ OK ] Started Remount Root and Kernel File Systems.
  585. [ OK ] Started Apply Kernel Variables.
  586. Starting Load/Save Random Seed...
  587. Starting Create Static Device Nodes in /dev...
  588. [ OK ] Started Create Static Device Nodes in /dev.
  589. [ OK ] Reached target Local File Systems (Pre).
  590. [ OK ] Reached target Local File Systems.
  591. [ OK ] Reached target Containers.
  592. [ OK ] Started Entropy Daemon based on the HAVEGE algorithm.
  593. Starting Journal Service...
  594. Starting udev Kernel Device Manager...
  595. [ OK ] Started udev Coldplug all Devices.
  596. [ OK ] Started Journal Service.
  597. [ OK ] Started udev Kernel Device Manager.
  598. Starting Flush Journal to Persistent Storage...
  599. Starting Network Service...
  600. [ 10.059415] systemd-journald[421]: Received client request to flush runtim
  601. e journal.
  602. [ OK ] Started Flush Journal to Persistent Storage.
  603. Starting Create Volatile Files and Directories...
  604. [ OK ] Started Create Volatile Files and Directories.
  605. Starting Network Time Synchronization...
  606. Starting Update UTMP about System Boot/Shutdown...
  607. [ OK ] Started Update UTMP about System Boot/Shutdown.
  608. [ OK ] Found device /dev/ttyS0.
  609. [ 10.730027] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec,
  610. nowayout=0)
  611. [ 10.827912] sunxi_cedrus: module is from the staging directory, the qualit
  612. y is unknown, you have been warned.
  613. [ 10.840788] cedrus 1c0e000.video-codec: Device registered as /dev/video0
  614. [ 10.890023] lima 1c40000.gpu: bus rate = 200000000
  615. [ 10.894908] lima 1c40000.gpu: mod rate = 297000000
  616. [ OK [ 10.958710] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/
  617. sunxi-rsb-3a3/axp221-pek/input/input0
  618. ] Started Network Service.
  619. [ 10.958938] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
  620. [ OK ] Reached target Network.
  621. [ 11.051905] cfg80211: Loading compiled-in X.509 certificates for regulator
  622. y database
  623. [ 11.065132] asoc-simple-card sound: sun8i <-> 1c22c00.dai mapping ok
  624. [ 11.078357] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
  625. [ 11.091407] asoc-simple-card sound: ASoC: no DMI vendor name!
  626. [ 11.104454] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
  627. [ 11.120477] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bi
  628. t external bus
  629. [ 11.160978] [drm] Initialized lima 1.0.0 20190217 for 1c40000.gpu on minor
  630. 1
  631. [ 11.185227] random: crng init done
  632. [ 11.188690] random: 7 urandom warning(s) missed due to ratelimiting
  633. [ 11.283374] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  634. [ 11.514798] platform regulatory.0: Direct firmware load for regulatory.db
  635. failed with error -2
  636. [ 11.523608] cfg80211: failed to load regulatory.db
  637. [ OK ] Reached target Sound Card.
  638. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
  639. [ 11.568702] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdi
  640. o for chip BCM43430/1
  641. [ 11.577640] usbcore: registered new interface driver brcmfmac
  642. [ OK ] Started Network Time Synchronization.
  643. [ 11.613874] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43
  644. 430-sdio.sinovoip,bananapi-m64.txt failed with error -2
  645. [ 11.625737] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43
  646. 430-sdio.txt failed with error -2
  647. [ OK ] Started Load/Save Random Seed.
  648. [ OK ] Reached target System Initialization.
  649. [ OK ] Started Daily Cleanup of Temporary Directories.
  650. [ OK ] Reached target System Time Set.
  651. [ OK ] Reached target System Time Synchronized.
  652. [ OK ] Started Daily verification of password and group files.
  653. [ OK ] Reached target Timers.
  654. [ OK ] Listening on D-Bus System Message Bus Socket.
  655. [ OK ] Reached target Sockets.
  656. [ OK ] Reached target Basic System.
  657. [ OK ] Started D-Bus System Message Bus.
  658. [ OK ] Started Pinebook Post Install..
  659. Starting Login Service...
  660. Starting Permit User Sessions...
  661. [ OK ] Started Permit User Sessions.
  662. [ OK ] Started Getty on tty1.
  663. [ OK ] Started Serial Getty on ttyS0.
  664. [ OK ] Reached target Login Prompts.
  665. [ 12.637051] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl
  666. 0x50
  667. [ OK ] Started Login Service.
  668. [ OK ] Reached target Multi-User System.
  669. [ OK ] Reached target Graphical Interface.
  670.  
  671. Manjaro Linux 5.3.0-3-MANJARO-ARM (ttyS0)
  672.  
  673. Manjaro-BPI-M64 login:
  674. Manjaro-BPI-M64 login:
  675. Manjaro-BPI-M64 login:
  676. Manjaro-BPI-M64 login: spiker
  677. Password:
  678. Welcome to Manjaro-ARM
  679. ~~Website: https://manjaro.org
  680. ~~Forum: https://forum.manjaro.org/c/manjaro-arm
  681. ~~IRC: #manjaro-arm on irc.freenode.net
  682. ~~Matrix: #manjaro-arm-public:matrix.org
  683. Last login: Wed Nov 6 16:56:00 on ttyS0
  684. [spiker@Manjaro-BPI-M64 ~]$
  685. [spiker@Manjaro-BPI-M64 ~]$
  686. [spiker@Manjaro-BPI-M64 ~]$ sudo shutdown now
  687. [sudo] password for spiker:
  688. Stopping Session c1 of user spiker.
  689. [ OK ] Stopped target Graphical Interface.
  690. [ OK ] Stopped target Multi-User System.
  691. [ OK ] Stopped target Login Prompts.
  692. [ OK ] Stopped target Containers.
  693. [ OK ] Stopped target Remote Encrypted Volumes.
  694. [ OK ] Stopped target Sound Card.
  695. [ OK ] Stopped target Timers.
  696. [ OK ] Stopped [ OK ] Removed slice system-getty.slice.
  697. [ OK ] Stopped Serial Getty on ttyS0.
  698. [ OK ] Stopped Load/Save Random Seed.
  699. [ OK ] Stopped Session c1 of user spiker.
  700. [ OK ] Removed slice system-serial\x2dgetty.slice.
  701. Stopping Login Service...
  702. Stopping User Manager for UID 1000...
  703. [ OK ] Stopped User Manager for UID 1000.
  704. Stopping User Runtime Directory /run/user/1000...
  705. [ OK ] Unmounted /run/user/1000.
  706. [ OK ] Stopped User Runtime Directory /run/user/1000.
  707. [ OK ] Removed slice User Slice of UID 1000.
  708. Stopping D-Bus System Message Bus...
  709. Stopping Permit User Sessions...
  710. [ OK ] Stopped D-Bus System Message Bus.
  711. [ OK ] Stopped Permit User Sessions.
  712. [ OK ] Stopped Login Service.
  713. [ OK ] Stopped target Basic System.
  714. [ OK ] Stopped target Network.
  715. [ OK ] Stopped target Paths.
  716. [ OK ] Stopped target Remote File Systems.
  717. [ OK ] Stopped target Slices.
  718. [ OK ] Removed slice User and Session Slice.
  719. [ OK ] Stopped target Sockets.
  720. [ OK ] Closed D-Bus System Message Bus Socket.
  721. [ OK ] Stopped target System Initialization.
  722. [ OK ] Stopped target Local Encrypted Volumes.
  723. [ OK ] Stopped Dispatch Password …ts to Console Directory Watch.
  724. [ OK ] Stopped Forward Password R…uests to Wall Directory Watch.
  725. Stopping Network Service...
  726. Stopping Network Time Synchronization...
  727. Stopping Update UTMP about System Boot/Shutdown...
  728. [ OK ] Stopped Network Service.
  729. [ OK ] Stopped Network Time Synchronization.
  730. [ OK ] Started Generate shutdown-ramfs.
  731. [ OK ] Stopped Apply Kernel Variables.
  732. [ OK ] Stopped Update UTMP about System Boot/Shutdown.
  733. [ OK ] Stopped Create Volatile Files and Directories.
  734. [ OK ] Stopped target Local File Systems.
  735. [ OK ] Stopped target Local File Systems (Pre).
  736. Unmounting Temporary Directory (/tmp)...
  737. [ OK ] Stopped Remount Root and Kernel File Systems.
  738. [ OK ] Stopped Create Static Device Nodes in /dev.
  739. [ OK ] Unmounted Temporary Directory (/tmp).
  740. [ OK ] Stopped target Swap.
  741. [ OK ] Reached target Shutdown.
  742. [ OK ] Reached target Unmount All Filesystems.
  743. [ OK ] Reached target Final Step.
  744. [ OK ] Started Power-Off.
  745. [ OK ] Reached target Power-Off.
  746. [ 502.444049] printk: systemd-shutdow: 51 output lines suppressed due to rat
  747. elimiting
  748. [ 502.484209] systemd-shutdown[1]: Syncing filesystems and block devices.
  749. [ 502.528972] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
  750. [ 502.550075] systemd-journald[421]: Received SIGTERM from PID 1 (systemd-sh
  751. utdow).
  752. [ 502.561152] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
  753. [ 502.578003] systemd-shutdown[1]: Unmounting file systems.
  754. [ 502.586137] [608]: Remounting '/' read-only in with options '(null)'.
  755. [ 502.604161] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  756. [ 502.622414] systemd-shutdown[1]: All filesystems unmounted.
  757. [ 502.629064] systemd-shutdown[1]: Deactivating swaps.
  758. [ 502.634220] systemd-shutdown[1]: All swaps deactivated.
  759. [ 502.639510] systemd-shutdown[1]: Detaching loop devices.
  760. [ 502.645286] systemd-shutdown[1]: All loop devices detached.
  761. [ 502.651169] systemd-shutdown[1]: Detaching DM devices.
  762. [ 502.679534] printk: shutdown: 4 output lines suppressed due to ratelimitin
  763. g
  764. [ 502.723733] shutdown[1]: Syncing filesystems and block devices.
  765. [ 502.730109] shutdown[1]: Sending SIGTERM to remaining processes...
  766. [ 502.742363] shutdown[1]: Sending SIGKILL to remaining processes...
  767. [ 502.754275] shutdown[1]: Unmounting file systems.
  768. [ 502.761668] sd-umoun[611]: Unmounting '/oldroot/sys/kernel/config'.
  769. [ 502.771927] sd-umoun[612]: Unmounting '/oldroot/sys/fs/fuse/connections'.
  770. [ 502.781239] sd-umoun[613]: Unmounting '/oldroot/sys/kernel/debug'.
  771. [ 502.791369] sd-umoun[614]: Unmounting '/oldroot/dev/mqueue'.
  772. [ 502.799281] sd-umoun[615]: Unmounting '/oldroot/dev/hugepages'.
  773. [ 502.810836] sd-umoun[616]: Unmounting '/oldroot/sys/fs/cgroup/rdma'.
  774. [ 502.819882] sd-umoun[617]: Unmounting '/oldroot/sys/fs/cgroup/cpuset'.
  775. [ 502.832467] sd-umoun[618]: Unmounting '/oldroot/sys/fs/cgroup/freezer'.
  776. [ 502.842047] sd-umoun[619]: Unmounting '/oldroot/sys/fs/cgroup/memory'.
  777. [ 502.854279] sd-umoun[620]: Unmounting '/oldroot/sys/fs/cgroup/cpu,cpuacct'
  778. .
  779. [ 502.863772] sd-umoun[621]: Unmounting '/oldroot/sys/fs/cgroup/pids'.
  780. [ 502.875679] sd-umoun[622]: Unmounting '/oldroot/sys/fs/cgroup/hugetlb'.
  781. [ 502.884663] sd-umoun[623]: Unmounting '/oldroot/sys/fs/cgroup/perf_event'.
  782. [ 502.896939] sd-umoun[624]: Unmounting '/oldroot/sys/fs/cgroup/devices'.
  783. [ 502.906237] sd-umoun[625]: Unmounting '/oldroot/sys/fs/cgroup/blkio'.
  784. [ 502.918272] sd-umoun[626]: Unmounting '/oldroot/sys/fs/cgroup/net_cls,net_
  785. prio'.
  786. [ 502.928358] sd-umoun[627]: Unmounting '/oldroot/sys/fs/bpf'.
  787. [ 502.936463] sd-umoun[628]: Unmounting '/oldroot/sys/fs/pstore'.
  788. [ 502.945055] sd-umoun[629]: Unmounting '/oldroot/sys/fs/cgroup/systemd'.
  789. [ 502.954220] sd-umoun[630]: Unmounting '/oldroot/sys/fs/cgroup/unified'.
  790. [ 502.963606] sd-umoun[631]: Unmounting '/oldroot/sys/fs/cgroup'.
  791. [ 502.972138] sd-umoun[632]: Unmounting '/oldroot/run'.
  792. [ 502.982628] sd-umoun[633]: Unmounting '/oldroot/dev/pts'.
  793. [ 502.990734] sd-umoun[634]: Unmounting '/oldroot/dev/shm'.
  794. [ 503.000849] sd-umoun[635]: Unmounting '/oldroot/sys/kernel/security'.
  795. [ 503.009954] sd-umoun[636]: Unmounting '/oldroot/proc'.
  796. [ 503.017452] sd-umoun[637]: Unmounting '/oldroot/sys'.
  797. [ 503.027890] sd-umoun[638]: Unmounting '/oldroot/dev'.
  798. [ 503.035141] sd-umoun[639]: Unmounting '/oldroot'.
  799. [ 503.078156] shutdown[1]: All filesystems unmounted.
  800. [ 503.083040] shutdown[1]: Deactivating swaps.
  801. [ 503.089313] shutdown[1]: All swaps deactivated.
  802. [ 503.093844] shutdown[1]: Detaching loop devices.
  803. [ 503.098883] shutdown[1]: All loop devices detached.
  804. [ 503.103761] shutdown[1]: Detaching DM devices.
  805. [ 504.139142] kvm: exiting hardware virtualization
  806. [ 504.226490] reboot: Power down
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!