Advertisement
cribari

dmesg_20171209_01

Dec 9th, 2017
566
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 104.00 KB | None | 0 0
  1. [ 0.000000] microcode: microcode updated early to revision 0xba, date = 2017-04-09
  2. [ 0.000000] Linux version 4.14.3-1-MANJARO (builduser@manjaro) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Thu Nov 30 14:22:30 UTC 2017
  3. [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.14-x86_64 root=UUID=a2e651db-7143-428c-9d81-616e5805207d rw elevator=deadline intel_iommu=off quiet libata.force=noncq resume=UUID=7e243ab6-c0ec-434b-b581-11ecc4d8639b
  4. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
  5. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
  6. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
  7. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
  8. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
  9. [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
  10. [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
  11. [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
  12. [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
  13. [ 0.000000] e820: BIOS-provided physical RAM map:
  14. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
  15. [ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
  16. [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
  17. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf34cfff] usable
  18. [ 0.000000] BIOS-e820: [mem 0x00000000cf34d000-0x00000000cf34dfff] ACPI NVS
  19. [ 0.000000] BIOS-e820: [mem 0x00000000cf34e000-0x00000000cf377fff] reserved
  20. [ 0.000000] BIOS-e820: [mem 0x00000000cf378000-0x00000000d3acefff] usable
  21. [ 0.000000] BIOS-e820: [mem 0x00000000d3acf000-0x00000000d4555fff] reserved
  22. [ 0.000000] BIOS-e820: [mem 0x00000000d4556000-0x00000000d4580fff] ACPI data
  23. [ 0.000000] BIOS-e820: [mem 0x00000000d4581000-0x00000000d4e77fff] ACPI NVS
  24. [ 0.000000] BIOS-e820: [mem 0x00000000d4e78000-0x00000000d52fdfff] reserved
  25. [ 0.000000] BIOS-e820: [mem 0x00000000d52fe000-0x00000000d52fefff] usable
  26. [ 0.000000] BIOS-e820: [mem 0x00000000d5300000-0x00000000d53fffff] reserved
  27. [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
  28. [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
  29. [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
  30. [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  31. [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
  32. [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000226ffffff] usable
  33. [ 0.000000] NX (Execute Disable) protection: active
  34. [ 0.000000] random: fast init done
  35. [ 0.000000] SMBIOS 3.0.0 present.
  36. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 900X3L/NP900X3L-KW1BR, BIOS P05AFN.035.160331.PS 03/31/2016
  37. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  38. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  39. [ 0.000000] e820: last_pfn = 0x227000 max_arch_pfn = 0x400000000
  40. [ 0.000000] MTRR default type: write-back
  41. [ 0.000000] MTRR fixed ranges enabled:
  42. [ 0.000000] 00000-9FFFF write-back
  43. [ 0.000000] A0000-BFFFF uncachable
  44. [ 0.000000] C0000-FFFFF write-protect
  45. [ 0.000000] MTRR variable ranges enabled:
  46. [ 0.000000] 0 base 00E0000000 mask 7FE0000000 uncachable
  47. [ 0.000000] 1 base 00D8000000 mask 7FF8000000 uncachable
  48. [ 0.000000] 2 base 00D6000000 mask 7FFE000000 uncachable
  49. [ 0.000000] 3 base 00D5800000 mask 7FFF800000 uncachable
  50. [ 0.000000] 4 disabled
  51. [ 0.000000] 5 disabled
  52. [ 0.000000] 6 disabled
  53. [ 0.000000] 7 disabled
  54. [ 0.000000] 8 disabled
  55. [ 0.000000] 9 disabled
  56. [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
  57. [ 0.000000] e820: last_pfn = 0xd52ff max_arch_pfn = 0x400000000
  58. [ 0.000000] found SMP MP-table at [mem 0x000fccc0-0x000fcccf] mapped at [ffffffffff200cc0]
  59. [ 0.000000] Scanning 1 areas for low memory corruption
  60. [ 0.000000] Base memory trampoline at [ffff97de80096000] 96000 size 24576
  61. [ 0.000000] Using GB pages for direct mapping
  62. [ 0.000000] BRK [0x15c1fe000, 0x15c1fefff] PGTABLE
  63. [ 0.000000] BRK [0x15c1ff000, 0x15c1fffff] PGTABLE
  64. [ 0.000000] BRK [0x15c200000, 0x15c200fff] PGTABLE
  65. [ 0.000000] BRK [0x15c201000, 0x15c201fff] PGTABLE
  66. [ 0.000000] BRK [0x15c202000, 0x15c202fff] PGTABLE
  67. [ 0.000000] BRK [0x15c203000, 0x15c203fff] PGTABLE
  68. [ 0.000000] BRK [0x15c204000, 0x15c204fff] PGTABLE
  69. [ 0.000000] BRK [0x15c205000, 0x15c205fff] PGTABLE
  70. [ 0.000000] BRK [0x15c206000, 0x15c206fff] PGTABLE
  71. [ 0.000000] RAMDISK: [mem 0x36fbb000-0x377d4fff]
  72. [ 0.000000] ACPI: Early table checksum verification disabled
  73. [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 SECCSD)
  74. [ 0.000000] ACPI: XSDT 0x00000000D455E090 0000A4 (v01 SECCSD LH43STAR 01072009 AMI 00010013)
  75. [ 0.000000] ACPI: FACP 0x00000000D4572000 00010C (v05 SECCSD LH43STAR 01072009 AMI 00010013)
  76. [ 0.000000] ACPI: DSDT 0x00000000D455E1C8 013E31 (v02 SECCSD LH43STAR 01072009 INTL 20120913)
  77. [ 0.000000] ACPI: FACS 0x00000000D4E75F80 000040
  78. [ 0.000000] ACPI: APIC 0x00000000D4572110 000084 (v03 SECCSD LH43STAR 01072009 AMI 00010013)
  79. [ 0.000000] ACPI: FPDT 0x00000000D4572198 000044 (v01 SECCSD LH43STAR 01072009 AMI 00010013)
  80. [ 0.000000] ACPI: FIDT 0x00000000D45721E0 0000B0 (v01 SECCSD LH43STAR 01072009 AMI 00010013)
  81. [ 0.000000] ACPI: MCFG 0x00000000D4572290 00003C (v01 SECCSD LH43STAR 01072009 MSFT 00000097)
  82. [ 0.000000] ACPI: HPET 0x00000000D45722D0 000038 (v01 SECCSD LH43STAR 01072009 AMI. 0005000B)
  83. [ 0.000000] ACPI: LPIT 0x00000000D4572308 000094 (v01 INTEL SKL-ULT 00000000 MSFT 0000005F)
  84. [ 0.000000] ACPI: DBGP 0x00000000D45723A0 000034 (v01 INTEL 00000000 MSFT 0000005F)
  85. [ 0.000000] ACPI: DBG2 0x00000000D45723D8 000054 (v00 INTEL 00000000 MSFT 0000005F)
  86. [ 0.000000] ACPI: SSDT 0x00000000D4572430 00847E (v02 DptfTa DptfTabl 00001000 INTL 20120913)
  87. [ 0.000000] ACPI: MSDM 0x00000000D457A8B0 000055 (v03 SECCSD LH43STAR 01072009 AMI 00010013)
  88. [ 0.000000] ACPI: SSDT 0x00000000D457A908 005461 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
  89. [ 0.000000] ACPI: UEFI 0x00000000D457FD70 000042 (v01 00000000 00000000)
  90. [ 0.000000] ACPI: SSDT 0x00000000D457FDB8 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
  91. [ 0.000000] ACPI: DMAR 0x00000000D4580C30 0000CC (v01 INTEL SKL 00000001 INTL 00000001)
  92. [ 0.000000] ACPI: TPM2 0x00000000D4580D00 000034 (v03 Tpm2Tabl 00000001 AMI 00000000)
  93. [ 0.000000] ACPI: Local APIC address 0xfee00000
  94. [ 0.000000] No NUMA configuration found
  95. [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000226ffffff]
  96. [ 0.000000] NODE_DATA(0) allocated [mem 0x226ffb000-0x226ffffff]
  97. [ 0.000000] Zone ranges:
  98. [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  99. [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
  100. [ 0.000000] Normal [mem 0x0000000100000000-0x0000000226ffffff]
  101. [ 0.000000] Device empty
  102. [ 0.000000] Movable zone start for each node
  103. [ 0.000000] Early memory node ranges
  104. [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
  105. [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000cf34cfff]
  106. [ 0.000000] node 0: [mem 0x00000000cf378000-0x00000000d3acefff]
  107. [ 0.000000] node 0: [mem 0x00000000d52fe000-0x00000000d52fefff]
  108. [ 0.000000] node 0: [mem 0x0000000100000000-0x0000000226ffffff]
  109. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000226ffffff]
  110. [ 0.000000] On node 0 totalpages: 2075200
  111. [ 0.000000] DMA zone: 64 pages used for memmap
  112. [ 0.000000] DMA zone: 21 pages reserved
  113. [ 0.000000] DMA zone: 3995 pages, LIFO batch:0
  114. [ 0.000000] DMA32 zone: 13483 pages used for memmap
  115. [ 0.000000] DMA32 zone: 862885 pages, LIFO batch:31
  116. [ 0.000000] Normal zone: 18880 pages used for memmap
  117. [ 0.000000] Normal zone: 1208320 pages, LIFO batch:31
  118. [ 0.000000] Reserving Intel graphics memory at 0x00000000d6000000-0x00000000d7ffffff
  119. [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
  120. [ 0.000000] ACPI: Local APIC address 0xfee00000
  121. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  122. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
  123. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
  124. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
  125. [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
  126. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  127. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  128. [ 0.000000] ACPI: IRQ0 used by override.
  129. [ 0.000000] ACPI: IRQ9 used by override.
  130. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  131. [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
  132. [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
  133. [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
  134. [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
  135. [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
  136. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
  137. [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
  138. [ 0.000000] PM: Registered nosave memory: [mem 0xcf34d000-0xcf34dfff]
  139. [ 0.000000] PM: Registered nosave memory: [mem 0xcf34e000-0xcf377fff]
  140. [ 0.000000] PM: Registered nosave memory: [mem 0xd3acf000-0xd4555fff]
  141. [ 0.000000] PM: Registered nosave memory: [mem 0xd4556000-0xd4580fff]
  142. [ 0.000000] PM: Registered nosave memory: [mem 0xd4581000-0xd4e77fff]
  143. [ 0.000000] PM: Registered nosave memory: [mem 0xd4e78000-0xd52fdfff]
  144. [ 0.000000] PM: Registered nosave memory: [mem 0xd52ff000-0xd52fffff]
  145. [ 0.000000] PM: Registered nosave memory: [mem 0xd5300000-0xd53fffff]
  146. [ 0.000000] PM: Registered nosave memory: [mem 0xd5400000-0xd5ffffff]
  147. [ 0.000000] PM: Registered nosave memory: [mem 0xd6000000-0xd7ffffff]
  148. [ 0.000000] PM: Registered nosave memory: [mem 0xd8000000-0xf7ffffff]
  149. [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
  150. [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
  151. [ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
  152. [ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
  153. [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
  154. [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
  155. [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
  156. [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
  157. [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
  158. [ 0.000000] e820: [mem 0xd8000000-0xf7ffffff] available for PCI devices
  159. [ 0.000000] Booting paravirtualized kernel on bare hardware
  160. [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
  161. [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
  162. [ 0.000000] percpu: Embedded 36 pages/cpu @ffff97e0a6c00000 s106584 r8192 d32680 u524288
  163. [ 0.000000] pcpu-alloc: s106584 r8192 d32680 u524288 alloc=1*2097152
  164. [ 0.000000] pcpu-alloc: [0] 0 1 2 3
  165. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2042752
  166. [ 0.000000] Policy zone: Normal
  167. [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14-x86_64 root=UUID=a2e651db-7143-428c-9d81-616e5805207d rw elevator=deadline intel_iommu=off quiet libata.force=noncq resume=UUID=7e243ab6-c0ec-434b-b581-11ecc4d8639b
  168. [ 0.000000] DMAR: IOMMU disabled
  169. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  170. [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
  171. [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
  172. [ 0.000000] Memory: 8076260K/8300800K available (6660K kernel code, 1139K rwdata, 2120K rodata, 1328K init, 916K bss, 224540K reserved, 0K cma-reserved)
  173. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  174. [ 0.000000] ftrace: allocating 29119 entries in 114 pages
  175. [ 0.000000] Preemptible hierarchical RCU implementation.
  176. [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
  177. [ 0.000000] Tasks RCU enabled.
  178. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  179. [ 0.000000] NR_IRQS: 8448, nr_irqs: 1024, preallocated irqs: 16
  180. [ 0.000000] spurious 8259A interrupt: IRQ7.
  181. [ 0.000000] Console: colour dummy device 80x25
  182. [ 0.000000] console [tty0] enabled
  183. [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
  184. [ 0.000000] hpet clockevent registered
  185. [ 0.003333] tsc: Detected 2600.000 MHz processor
  186. [ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5186.00 BogoMIPS (lpj=8640000)
  187. [ 0.003333] pid_max: default: 32768 minimum: 301
  188. [ 0.003333] ACPI: Core revision 20170728
  189. [ 0.030826] ACPI: 4 ACPI AML tables successfully acquired and loaded
  190. [ 0.030853] Security Framework initialized
  191. [ 0.030854] Yama: becoming mindful.
  192. [ 0.032001] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  193. [ 0.032564] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  194. [ 0.032587] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  195. [ 0.032605] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
  196. [ 0.032780] CPU: Physical Processor ID: 0
  197. [ 0.032780] CPU: Processor Core ID: 0
  198. [ 0.032785] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
  199. [ 0.032786] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
  200. [ 0.032791] mce: CPU supports 8 MCE banks
  201. [ 0.032800] CPU0: Thermal monitoring enabled (TM1)
  202. [ 0.032815] process: using mwait in idle threads
  203. [ 0.032818] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
  204. [ 0.032818] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
  205. [ 0.033391] Freeing SMP alternatives memory: 24K
  206. [ 0.034326] smpboot: Max logical packages: 2
  207. [ 0.034330] DMAR: Host address width 39
  208. [ 0.034332] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
  209. [ 0.034338] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
  210. [ 0.034339] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
  211. [ 0.034342] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
  212. [ 0.034343] DMAR: RMRR base: 0x000000d42f8000 end: 0x000000d4317fff
  213. [ 0.034344] DMAR: RMRR base: 0x000000d5800000 end: 0x000000d7ffffff
  214. [ 0.034345] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
  215. [ 0.034347] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
  216. [ 0.034348] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
  217. [ 0.034348] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
  218. [ 0.034349] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
  219. [ 0.035779] DMAR-IR: Enabled IRQ remapping in xapic mode
  220. [ 0.035779] x2apic: IRQ remapping doesn't support X2APIC mode
  221. [ 0.039785] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  222. [ 0.072823] TSC deadline timer enabled
  223. [ 0.072828] smpboot: CPU0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz (family: 0x6, model: 0x4e, stepping: 0x3)
  224. [ 0.083360] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
  225. [ 0.083503] ... version: 4
  226. [ 0.083503] ... bit width: 48
  227. [ 0.083503] ... generic registers: 4
  228. [ 0.083504] ... value mask: 0000ffffffffffff
  229. [ 0.083504] ... max period: 00007fffffffffff
  230. [ 0.083505] ... fixed-purpose events: 3
  231. [ 0.083505] ... event mask: 000000070000000f
  232. [ 0.090011] Hierarchical SRCU implementation.
  233. [ 0.103511] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
  234. [ 0.110010] smp: Bringing up secondary CPUs ...
  235. [ 0.136707] x86: Booting SMP configuration:
  236. [ 0.136712] .... node #0, CPUs: #1 #2 #3
  237. [ 0.191867] smp: Brought up 1 node, 4 CPUs
  238. [ 0.191867] smpboot: Total of 4 processors activated (20744.00 BogoMIPS)
  239. [ 0.193611] devtmpfs: initialized
  240. [ 0.193611] x86/mm: Memory block size: 128MB
  241. [ 0.193924] PM: Registering ACPI NVS region [mem 0xcf34d000-0xcf34dfff] (4096 bytes)
  242. [ 0.193924] PM: Registering ACPI NVS region [mem 0xd4581000-0xd4e77fff] (9400320 bytes)
  243. [ 0.193924] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  244. [ 0.193924] futex hash table entries: 1024 (order: 4, 65536 bytes)
  245. [ 0.193924] pinctrl core: initialized pinctrl subsystem
  246. [ 0.193924] RTC time: 22:49:16, date: 12/06/17
  247. [ 0.193924] NET: Registered protocol family 16
  248. [ 0.193924] cpuidle: using governor ladder
  249. [ 0.196695] cpuidle: using governor menu
  250. [ 0.196817] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
  251. [ 0.196818] ACPI: bus type PCI registered
  252. [ 0.196826] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  253. [ 0.196889] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
  254. [ 0.196892] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
  255. [ 0.196899] PCI: Using configuration type 1 for base access
  256. [ 0.200089] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  257. [ 0.200089] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  258. [ 0.200089] ACPI: Added _OSI(Module Device)
  259. [ 0.200089] ACPI: Added _OSI(Processor Device)
  260. [ 0.200089] ACPI: Added _OSI(3.0 _SCP Extensions)
  261. [ 0.200089] ACPI: Added _OSI(Processor Aggregator Device)
  262. [ 0.200806] ACPI: Executed 18 blocks of module-level executable AML code
  263. [ 0.206972] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
  264. [ 0.210063] ACPI: Dynamic OEM Table Load:
  265. [ 0.210068] ACPI: SSDT 0xFFFF97E09CEA0000 000660 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
  266. [ 0.210273] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
  267. [ 0.211283] ACPI: Dynamic OEM Table Load:
  268. [ 0.211286] ACPI: SSDT 0xFFFF97E09C815400 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
  269. [ 0.211535] ACPI: Dynamic OEM Table Load:
  270. [ 0.211538] ACPI: SSDT 0xFFFF97E09C8DDC00 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20120913)
  271. [ 0.211697] ACPI: Dynamic OEM Table Load:
  272. [ 0.211699] ACPI: SSDT 0xFFFF97E09C829600 000130 (v02 PmRef HwpLvt 00003000 INTL 20120913)
  273. [ 0.212341] ACPI: Dynamic OEM Table Load:
  274. [ 0.212346] ACPI: SSDT 0xFFFF97E09CEA1000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
  275. [ 0.212769] ACPI: Dynamic OEM Table Load:
  276. [ 0.212772] ACPI: SSDT 0xFFFF97E09C828600 000119 (v02 PmRef ApHwp 00003000 INTL 20120913)
  277. [ 0.213020] ACPI: Dynamic OEM Table Load:
  278. [ 0.213023] ACPI: SSDT 0xFFFF97E09C901800 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
  279. [ 0.217970] ACPI: EC: EC started
  280. [ 0.217972] ACPI: EC: interrupt blocked
  281. [ 0.219966] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
  282. [ 0.219967] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0xf, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  283. [ 0.219969] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
  284. [ 0.219969] ACPI: Interpreter enabled
  285. [ 0.220013] ACPI: (supports S0 S3 S4 S5)
  286. [ 0.220013] ACPI: Using IOAPIC for interrupt routing
  287. [ 0.220048] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  288. [ 0.220517] ACPI: Enabled 7 GPEs in block 00 to 7F
  289. [ 0.222874] ACPI: Power Resource [PG00] (on)
  290. [ 0.223184] ACPI: Power Resource [PG01] (on)
  291. [ 0.223478] ACPI: Power Resource [PG02] (on)
  292. [ 0.226780] ACPI: Power Resource [WRST] (off)
  293. [ 0.227258] ACPI: Power Resource [WRST] (off)
  294. [ 0.233605] ACPI: Power Resource [FN00] (off)
  295. [ 0.233664] ACPI: Power Resource [FN01] (off)
  296. [ 0.234740] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
  297. [ 0.234745] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  298. [ 0.234774] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
  299. [ 0.235356] PCI host bridge to bus 0000:00
  300. [ 0.235358] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
  301. [ 0.235359] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
  302. [ 0.235360] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
  303. [ 0.235361] pci_bus 0000:00: root bus resource [mem 0xd8000000-0xf7ffffff window]
  304. [ 0.235362] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
  305. [ 0.235363] pci_bus 0000:00: root bus resource [bus 00-3e]
  306. [ 0.235371] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
  307. [ 0.235481] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
  308. [ 0.235492] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
  309. [ 0.235498] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
  310. [ 0.235502] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
  311. [ 0.235627] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
  312. [ 0.235641] pci 0000:00:04.0: reg 0x10: [mem 0xf7220000-0xf7227fff 64bit]
  313. [ 0.235833] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
  314. [ 0.235856] pci 0000:00:14.0: reg 0x10: [mem 0xf7210000-0xf721ffff 64bit]
  315. [ 0.235924] pci 0000:00:14.0: PME# supported from D3hot D3cold
  316. [ 0.236043] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
  317. [ 0.236066] pci 0000:00:14.2: reg 0x10: [mem 0xf7237000-0xf7237fff 64bit]
  318. [ 0.236301] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
  319. [ 0.236552] pci 0000:00:15.0: reg 0x10: [mem 0xf7236000-0xf7236fff 64bit]
  320. [ 0.240681] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
  321. [ 0.240700] pci 0000:00:16.0: reg 0x10: [mem 0xf7235000-0xf7235fff 64bit]
  322. [ 0.240755] pci 0000:00:16.0: PME# supported from D3hot
  323. [ 0.240873] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
  324. [ 0.240891] pci 0000:00:17.0: reg 0x10: [mem 0xf7230000-0xf7231fff]
  325. [ 0.240897] pci 0000:00:17.0: reg 0x14: [mem 0xf7234000-0xf72340ff]
  326. [ 0.240904] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
  327. [ 0.240911] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
  328. [ 0.240918] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
  329. [ 0.240925] pci 0000:00:17.0: reg 0x24: [mem 0xf7233000-0xf72337ff]
  330. [ 0.240968] pci 0000:00:17.0: PME# supported from D3hot
  331. [ 0.241088] pci 0000:00:1c.0: [8086:9d12] type 01 class 0x060400
  332. [ 0.241158] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
  333. [ 0.241298] pci 0000:00:1c.3: [8086:9d13] type 01 class 0x060400
  334. [ 0.241368] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
  335. [ 0.241518] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
  336. [ 0.241728] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
  337. [ 0.241744] pci 0000:00:1f.2: reg 0x10: [mem 0xf722c000-0xf722ffff]
  338. [ 0.241902] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
  339. [ 0.241931] pci 0000:00:1f.3: reg 0x10: [mem 0xf7228000-0xf722bfff 64bit]
  340. [ 0.241964] pci 0000:00:1f.3: reg 0x20: [mem 0xf7200000-0xf720ffff 64bit]
  341. [ 0.242016] pci 0000:00:1f.3: PME# supported from D3hot D3cold
  342. [ 0.242183] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
  343. [ 0.242242] pci 0000:00:1f.4: reg 0x10: [mem 0xf7232000-0xf72320ff 64bit]
  344. [ 0.242311] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
  345. [ 0.242574] pci 0000:01:00.0: [8086:24f3] type 00 class 0x028000
  346. [ 0.242628] pci 0000:01:00.0: reg 0x10: [mem 0xf7100000-0xf7101fff 64bit]
  347. [ 0.242833] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  348. [ 0.250139] pci 0000:00:1c.0: PCI bridge to [bus 01]
  349. [ 0.250144] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
  350. [ 0.250223] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
  351. [ 0.250252] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
  352. [ 0.250280] pci 0000:02:00.0: reg 0x18: [mem 0xf7004000-0xf7004fff 64bit]
  353. [ 0.250297] pci 0000:02:00.0: reg 0x20: [mem 0xf7000000-0xf7003fff 64bit]
  354. [ 0.250392] pci 0000:02:00.0: supports D1 D2
  355. [ 0.250393] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  356. [ 0.260063] pci 0000:00:1c.3: PCI bridge to [bus 02]
  357. [ 0.260073] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
  358. [ 0.260082] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
  359. [ 0.261764] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
  360. [ 0.261808] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
  361. [ 0.261850] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
  362. [ 0.261892] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
  363. [ 0.261935] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
  364. [ 0.261977] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
  365. [ 0.262018] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
  366. [ 0.262060] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
  367. [ 0.262714] ACPI: EC: interrupt unblocked
  368. [ 0.262726] ACPI: EC: event unblocked
  369. [ 0.262737] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0xf, EC_CMD/EC_SC=0x66, EC_DATA=0x62
  370. [ 0.262738] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
  371. [ 0.262791] pci 0000:00:02.0: vgaarb: setting as boot VGA device
  372. [ 0.262791] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  373. [ 0.262791] pci 0000:00:02.0: vgaarb: bridge control possible
  374. [ 0.262791] vgaarb: loaded
  375. [ 0.262791] EDAC MC: Ver: 3.0.0
  376. [ 0.262791] PCI: Using ACPI for IRQ routing
  377. [ 0.266458] PCI: pci_cache_line_size set to 64 bytes
  378. [ 0.266555] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
  379. [ 0.266556] e820: reserve RAM buffer [mem 0xcf34d000-0xcfffffff]
  380. [ 0.266556] e820: reserve RAM buffer [mem 0xd3acf000-0xd3ffffff]
  381. [ 0.266557] e820: reserve RAM buffer [mem 0xd52ff000-0xd7ffffff]
  382. [ 0.266558] e820: reserve RAM buffer [mem 0x227000000-0x227ffffff]
  383. [ 0.266622] NetLabel: Initializing
  384. [ 0.266623] NetLabel: domain hash size = 128
  385. [ 0.266623] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  386. [ 0.266637] NetLabel: unlabeled traffic allowed by default
  387. [ 0.267096] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
  388. [ 0.267101] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
  389. [ 0.270001] clocksource: Switched to clocksource hpet
  390. [ 0.277466] VFS: Disk quotas dquot_6.6.0
  391. [ 0.277482] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  392. [ 0.277525] pnp: PnP ACPI init
  393. [ 0.277767] system 00:00: [io 0x0680-0x069f] has been reserved
  394. [ 0.277769] system 00:00: [io 0xffff] has been reserved
  395. [ 0.277770] system 00:00: [io 0xffff] has been reserved
  396. [ 0.277771] system 00:00: [io 0xffff] has been reserved
  397. [ 0.277772] system 00:00: [io 0x1800-0x18fe] has been reserved
  398. [ 0.277773] system 00:00: [io 0x164e-0x164f] has been reserved
  399. [ 0.277777] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
  400. [ 0.277864] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
  401. [ 0.277893] system 00:02: [io 0x1854-0x1857] has been reserved
  402. [ 0.277895] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
  403. [ 0.277915] pnp 00:03: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
  404. [ 0.278340] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
  405. [ 0.278342] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
  406. [ 0.278343] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
  407. [ 0.278344] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved
  408. [ 0.278345] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
  409. [ 0.278346] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
  410. [ 0.278347] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
  411. [ 0.278348] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
  412. [ 0.278349] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
  413. [ 0.278351] system 00:04: [mem 0xf7fe0000-0xf7ffffff] has been reserved
  414. [ 0.278353] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
  415. [ 0.278384] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
  416. [ 0.278385] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
  417. [ 0.278386] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
  418. [ 0.278388] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
  419. [ 0.278389] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
  420. [ 0.278390] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
  421. [ 0.278391] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
  422. [ 0.278393] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
  423. [ 0.278663] system 00:06: [io 0xff00-0xfffe] has been reserved
  424. [ 0.278665] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
  425. [ 0.279613] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
  426. [ 0.279614] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
  427. [ 0.279616] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
  428. [ 0.280054] system 00:08: [io 0x0a00-0x0a07] has been reserved
  429. [ 0.280057] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
  430. [ 0.280476] pnp: PnP ACPI: found 9 devices
  431. [ 0.287886] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  432. [ 0.287903] pci 0000:00:1c.0: PCI bridge to [bus 01]
  433. [ 0.287907] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
  434. [ 0.287913] pci 0000:00:1c.3: PCI bridge to [bus 02]
  435. [ 0.287915] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
  436. [ 0.287918] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
  437. [ 0.287925] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
  438. [ 0.287926] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
  439. [ 0.287927] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
  440. [ 0.287928] pci_bus 0000:00: resource 7 [mem 0xd8000000-0xf7ffffff window]
  441. [ 0.287929] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
  442. [ 0.287930] pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff]
  443. [ 0.287931] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
  444. [ 0.287932] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
  445. [ 0.288043] NET: Registered protocol family 2
  446. [ 0.288158] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  447. [ 0.288255] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  448. [ 0.288387] TCP: Hash tables configured (established 65536 bind 65536)
  449. [ 0.288412] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  450. [ 0.288433] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  451. [ 0.288495] NET: Registered protocol family 1
  452. [ 0.288506] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  453. [ 0.288785] PCI: CLS 0 bytes, default 64
  454. [ 0.288812] Unpacking initramfs...
  455. [ 0.395482] Freeing initrd memory: 8296K
  456. [ 0.396297] DMAR: ACPI device "device:5d" under DMAR at fed91000 as 00:15.0
  457. [ 0.396312] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  458. [ 0.396314] software IO TLB [mem 0xcfacf000-0xd3acf000] (64MB) mapped at [ffff97df4facf000-ffff97df53acefff]
  459. [ 0.396481] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb6cc5db, max_idle_ns: 440795203504 ns
  460. [ 0.396590] Scanning for low memory corruption every 60 seconds
  461. [ 0.397113] Initialise system trusted keyrings
  462. [ 0.397121] Key type blacklist registered
  463. [ 0.397203] workingset: timestamp_bits=40 max_order=21 bucket_order=0
  464. [ 0.398005] zbud: loaded
  465. [ 0.400454] Key type asymmetric registered
  466. [ 0.400486] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  467. [ 0.400542] io scheduler noop registered
  468. [ 0.400543] io scheduler deadline registered (default)
  469. [ 0.400577] io scheduler cfq registered
  470. [ 0.400577] io scheduler mq-deadline registered
  471. [ 0.400578] io scheduler kyber registered
  472. [ 0.400596] io scheduler bfq registered
  473. [ 0.400613] io scheduler bfq-sq registered
  474. [ 0.400614] BFQ I/O-scheduler: v8r12 (with cgroups support)
  475. [ 0.400630] io scheduler bfq-mq registered
  476. [ 0.400631] BFQ I/O-scheduler: v8r12 (with cgroups support)
  477. [ 0.401082] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
  478. [ 0.401083] vesafb: scrolling: redraw
  479. [ 0.401084] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
  480. [ 0.401092] vesafb: framebuffer at 0xe0000000, mapped to 0xffffbfe3c1800000, using 8128k, total 8128k
  481. [ 0.588715] Console: switching to colour frame buffer device 240x67
  482. [ 0.775581] fb0: VESA VGA frame buffer device
  483. [ 0.775594] intel_idle: MWAIT substates: 0x11142120
  484. [ 0.775594] intel_idle: v0.4.1 model 0x4E
  485. [ 0.775829] intel_idle: lapic_timer_reliable_states 0xffffffff
  486. [ 0.776556] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  487. [ 0.777817] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
  488. [ 0.777902] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
  489. [ 0.777910] intel_pstate: Intel P-state driver initializing
  490. [ 0.778451] intel_pstate: HWP enabled
  491. [ 0.778558] ledtrig-cpu: registered to indicate activity on CPUs
  492. [ 0.778590] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
  493. [ 0.778761] NET: Registered protocol family 10
  494. [ 0.782238] Segment Routing with IPv6
  495. [ 0.782251] NET: Registered protocol family 17
  496. [ 0.782611] RAS: Correctable Errors collector initialized.
  497. [ 0.782665] microcode: sig=0x406e3, pf=0x80, revision=0xba
  498. [ 0.782974] microcode: Microcode Update Driver: v2.2.
  499. [ 0.782982] sched_clock: Marking stable (782952261, 0)->(788378361, -5426100)
  500. [ 0.783312] registered taskstats version 1
  501. [ 0.783317] Loading compiled-in X.509 certificates
  502. [ 0.783328] zswap: loaded using pool lzo/zbud
  503. [ 0.785227] Key type big_key registered
  504. [ 0.785847] Magic number: 13:609:855
  505. [ 0.786025] rtc_cmos 00:01: setting system clock to 2017-12-06 22:49:16 UTC (1512600556)
  506. [ 0.787541] Freeing unused kernel memory: 1328K
  507. [ 0.787541] Write protecting the kernel read-only data: 12288k
  508. [ 0.787984] Freeing unused kernel memory: 1520K
  509. [ 0.790806] Freeing unused kernel memory: 1976K
  510. [ 0.830291] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  511. [ 0.830293] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  512. [ 0.832233] serio: i8042 KBD port at 0x60,0x64 irq 1
  513. [ 0.840501] ACPI: bus type USB registered
  514. [ 0.840522] usbcore: registered new interface driver usbfs
  515. [ 0.840529] usbcore: registered new interface driver hub
  516. [ 0.840566] usbcore: registered new device driver usb
  517. [ 0.841192] SCSI subsystem initialized
  518. [ 0.843163] libata version 3.00 loaded.
  519. [ 0.843237] xhci_hcd 0000:00:14.0: xHCI Host Controller
  520. [ 0.843242] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
  521. [ 0.844403] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
  522. [ 0.844407] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
  523. [ 0.844633] hub 1-0:1.0: USB hub found
  524. [ 0.844664] hub 1-0:1.0: 12 ports detected
  525. [ 0.845304] xhci_hcd 0000:00:14.0: xHCI Host Controller
  526. [ 0.845306] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
  527. [ 0.845412] hub 2-0:1.0: USB hub found
  528. [ 0.845429] hub 2-0:1.0: 6 ports detected
  529. [ 0.846034] ahci 0000:00:17.0: version 3.0
  530. [ 0.846268] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
  531. [ 0.846270] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
  532. [ 0.846450] scsi host0: ahci
  533. [ 0.846539] scsi host1: ahci
  534. [ 0.846568] ata1: DUMMY
  535. [ 0.846572] ata2: SATA max UDMA/133 abar m2048@0xf7233000 port 0xf7233180 irq 123
  536. [ 0.876359] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  537. [ 1.157581] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  538. [ 1.160607] ata2.00: FORCE: horkage modified (noncq)
  539. [ 1.160674] ata2.00: ATA-9: LITEON CV1-8B256, G882002, max UDMA/133
  540. [ 1.160677] ata2.00: 500118192 sectors, multi 2: LBA48 NCQ (not used)
  541. [ 1.161549] ata2.00: configured for UDMA/133
  542. [ 1.162103] scsi 1:0:0:0: Direct-Access ATA LITEON CV1-8B256 002 PQ: 0 ANSI: 5
  543. [ 1.168263] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
  544. [ 1.168294] sd 1:0:0:0: [sda] Write Protect is off
  545. [ 1.168299] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
  546. [ 1.168392] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  547. [ 1.169512] sda: sda1 sda2 sda3 sda4 < sda5 >
  548. [ 1.170697] sd 1:0:0:0: [sda] Attached SCSI disk
  549. [ 1.173417] usb 1-5: new full-speed USB device number 2 using xhci_hcd
  550. [ 1.228796] PM: Starting manual resume from disk
  551. [ 1.228971] PM: Image not found (code -22)
  552. [ 1.288212] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
  553. [ 1.406540] ip_tables: (C) 2000-2006 Netfilter Core Team
  554. [ 1.410129] clocksource: Switched to clocksource tsc
  555. [ 1.417032] systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
  556. [ 1.417172] systemd[1]: Detected architecture x86-64.
  557. [ 1.417317] systemd[1]: Set hostname to <darwin5>.
  558. [ 1.436683] usb 1-6: new high-speed USB device number 3 using xhci_hcd
  559. [ 1.509072] systemd[1]: Created slice System Slice.
  560. [ 1.511198] systemd[1]: Listening on Process Core Dump Socket.
  561. [ 1.512353] systemd[1]: Mounting POSIX Message Queue File System...
  562. [ 1.512461] systemd[1]: Listening on LVM2 metadata daemon socket.
  563. [ 1.516411] systemd[1]: Listening on Journal Socket (/dev/log).
  564. [ 1.516481] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  565. [ 1.516531] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  566. [ 1.532183] EXT4-fs (sda3): re-mounted. Opts: discard
  567. [ 1.538364] sd 1:0:0:0: Attached scsi generic sg0 type 0
  568. [ 1.569807] systemd-journald[192]: Received request to flush runtime journal from PID 1
  569. [ 1.876132] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
  570. [ 1.876171] ACPI: Lid Switch [LID0]
  571. [ 1.876221] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
  572. [ 1.876239] ACPI: Power Button [PWRB]
  573. [ 1.876280] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
  574. [ 1.876290] ACPI: Power Button [PWRF]
  575. [ 1.880178] ACPI: AC Adapter [ADP1] (on-line)
  576. [ 1.945715] hidraw: raw HID events driver (C) Jiri Kosina
  577. [ 1.948053] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  578. [ 1.955086] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
  579. [ 1.955977] ACPI: Invalid active2 threshold
  580. [ 1.956229] Linux agpgart interface v0.103
  581. [ 1.957650] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  582. [ 1.957943] thermal LNXTHERM:00: registered as thermal_zone3
  583. [ 1.957944] ACPI: Thermal Zone [TZ00] (49 C)
  584. [ 1.958722] thermal LNXTHERM:01: registered as thermal_zone4
  585. [ 1.958723] ACPI: Thermal Zone [TZ01] (49 C)
  586. [ 1.994582] idma64 idma64.0: Found Intel integrated DMA 64-bit
  587. [ 2.001130] input: PC Speaker as /devices/platform/pcspkr/input/input4
  588. [ 2.006056] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
  589. [ 2.006057] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
  590. [ 2.006058] RAPL PMU: hw unit of domain package 2^-14 Joules
  591. [ 2.006059] RAPL PMU: hw unit of domain dram 2^-14 Joules
  592. [ 2.006059] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
  593. [ 2.006060] RAPL PMU: hw unit of domain psys 2^-14 Joules
  594. [ 2.023398] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  595. [ 2.024197] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
  596. [ 2.039375] i801_smbus 0000:00:1f.4: SPD Write Disable is set
  597. [ 2.039401] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
  598. [ 2.060885] ACPI: Battery Slot [BAT1] (battery present)
  599. [ 2.190399] Adding 9215112k swap on /dev/sda5. Priority:-2 extents:1 across:9215112k SSDscFS
  600. [ 2.244807] samsung_laptop: detected SABI interface: SwSmi@
  601. [ 2.273052] AVX2 version of gcm_enc/dec engaged.
  602. [ 2.273056] AES CTR mode by8 optimization enabled
  603. [ 2.307273] r8168: loading out-of-tree module taints kernel.
  604. [ 2.354084] r8168 Gigabit Ethernet driver 8.044.02-NAPI loaded
  605. [ 2.354097] r8168 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
  606. [ 2.359549] input: SYN2602:00 06CB:2871 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-SYN2602:00/0018:06CB:2871.0001/input/input6
  607. [ 2.359756] hid-multitouch 0018:06CB:2871.0001: input,hidraw0: I2C HID v1.00 Mouse [SYN2602:00 06CB:2871] on i2c-SYN2602:00
  608. [ 2.361961] iTCO_vendor_support: vendor-support=0
  609. [ 2.367328] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
  610. [ 2.367511] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
  611. [ 2.367688] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  612. [ 2.369571] Intel(R) Wireless WiFi driver for Linux
  613. [ 2.369572] Copyright(c) 2003- 2015 Intel Corporation
  614. [ 2.373464] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-34.ucode failed with error -2
  615. [ 2.373495] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-33.ucode failed with error -2
  616. [ 2.373503] iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-32.ucode failed with error -2
  617. [ 2.383073] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
  618. [ 2.383077] r8168 Copyright (C) 2017 Realtek NIC software team <[email protected]>
  619. [ 2.388887] iwlwifi 0000:01:00.0: loaded firmware version 31.532993.0 op_mode iwlmvm
  620. [ 2.399961] r8168 0000:02:00.0 enp2s0: renamed from eth0
  621. [ 2.405624] mousedev: PS/2 mouse device common for all mice
  622. [ 2.441147] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
  623. [ 2.455045] Setting dangerous option enable_psr - tainting kernel
  624. [ 2.458278] [drm] Memory usable by graphics device = 4096M
  625. [ 2.458281] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
  626. [ 2.458282] fb: switching to inteldrmfb from VESA VGA
  627. [ 2.458319] Console: switching to colour dummy device 80x25
  628. [ 2.458561] [drm] Replacing VGA console driver
  629. [ 2.460496] intel_rapl: Found RAPL domain package
  630. [ 2.460497] intel_rapl: Found RAPL domain core
  631. [ 2.460498] intel_rapl: Found RAPL domain uncore
  632. [ 2.460499] intel_rapl: Found RAPL domain dram
  633. [ 2.464757] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  634. [ 2.464759] [drm] Driver supports precise vblank timestamp query.
  635. [ 2.466785] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
  636. [ 2.473731] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
  637. [ 2.475363] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
  638. [ 2.477152] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
  639. [ 2.477348] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
  640. [ 2.483493] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
  641. [ 2.493167] fbcon: inteldrmfb (fb0) is primary device
  642. [ 2.515830] iwlwifi 0000:01:00.0: base HW address: 00:c2:c6:cf:a5:21
  643. [ 2.590574] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
  644. [ 2.590834] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  645. [ 2.590853] thermal thermal_zone7: failed to read out thermal zone (-61)
  646. [ 2.592113] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
  647. [ 3.036715] media: Linux media interface: v0.10
  648. [ 3.043871] Linux video capture interface: v2.00
  649. [ 3.044999] Bluetooth: Core ver 2.22
  650. [ 3.045029] NET: Registered protocol family 31
  651. [ 3.045030] Bluetooth: HCI device and connection manager initialized
  652. [ 3.045033] Bluetooth: HCI socket layer initialized
  653. [ 3.045035] Bluetooth: L2CAP socket layer initialized
  654. [ 3.045042] Bluetooth: SCO socket layer initialized
  655. [ 3.052779] usbcore: registered new interface driver btusb
  656. [ 3.053243] uvcvideo: Found UVC 1.00 device ATIV Real HD Camera (2232:1079)
  657. [ 3.054011] Bluetooth: hci0: Firmware revision 0.0 build 118 week 50 2016
  658. [ 3.056823] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
  659. [ 3.056825] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
  660. [ 3.056826] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
  661. [ 3.057029] input: ATIV Real HD Camera: ATIV Real as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input12
  662. [ 3.057200] usbcore: registered new interface driver uvcvideo
  663. [ 3.057201] USB Video Class driver (1.1.1)
  664. [ 3.068598] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  665. [ 3.068599] Bluetooth: BNEP filters: protocol multicast
  666. [ 3.068602] Bluetooth: BNEP socket layer initialized
  667. [ 3.091130] random: crng init done
  668. [ 3.131359] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  669. [ 3.131566] enp2s0: 0xffffbfe3c10ef000, 98:83:89:6c:49:7a, IRQ 125
  670. [ 3.181402] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  671. [ 3.201887] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  672. [ 3.443155] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  673. [ 3.638888] Console: switching to colour frame buffer device 240x67
  674. [ 3.666855] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
  675. [ 3.692660] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  676. [ 3.725590] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC256: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
  677. [ 3.725594] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  678. [ 3.725595] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
  679. [ 3.725596] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
  680. [ 3.725597] snd_hda_codec_realtek hdaudioC0D0: inputs:
  681. [ 3.725599] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
  682. [ 3.725600] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
  683. [ 3.779643] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  684. [ 3.884451] [drm] RC6 on
  685. [ 3.989662] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
  686. [ 3.989718] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
  687. [ 3.989768] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
  688. [ 3.989819] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
  689. [ 3.989886] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
  690. [ 3.989932] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
  691. [ 3.989981] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
  692. [ 9.288197] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  693. [ 9.300302] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  694. [ 9.302936] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  695. [ 11.003399] Bluetooth: RFCOMM TTY layer initialized
  696. [ 11.003406] Bluetooth: RFCOMM socket layer initialized
  697. [ 11.003410] Bluetooth: RFCOMM ver 1.11
  698. [ 13.927326] fuse init (API version 7.26)
  699. [ 17.342929] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  700. [ 23.039046] NET: Registered protocol family 38
  701. [ 23.733739] input: MX Master 2S as /devices/virtual/misc/uhid/0005:046D:B019.0002/input/input20
  702. [ 23.734204] hid-generic 0005:046D:B019.0002: input,hidraw1: BLUETOOTH HID v0.03 Keyboard [MX Master 2S] on 00:C2:C6:CF:A5:25
  703. [ 24.600920] wlp1s0: authenticate with 70:3a:cb:29:33:a3
  704. [ 24.611592] wlp1s0: send auth to 70:3a:cb:29:33:a3 (try 1/3)
  705. [ 24.619203] wlp1s0: authenticated
  706. [ 24.620072] wlp1s0: associate with 70:3a:cb:29:33:a3 (try 1/3)
  707. [ 24.622901] wlp1s0: RX AssocResp from 70:3a:cb:29:33:a3 (capab=0x11 status=0 aid=1)
  708. [ 24.624447] wlp1s0: associated
  709. [ 24.624528] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
  710. [ 1393.766983] iwlwifi 0000:01:00.0: Queue 11 is active on fifo 1 and stuck for 10000 ms. SW [42, 88] HW [42, 88] FH TRB=0x0c010b039
  711. [ 1393.767137] iwlwifi 0000:01:00.0: Microcode SW error detected. Restarting 0x2000000.
  712. [ 1393.767302] iwlwifi 0000:01:00.0: Start IWL Error Log Dump:
  713. [ 1393.767310] iwlwifi 0000:01:00.0: Status: 0x00000100, count: 6
  714. [ 1393.767318] iwlwifi 0000:01:00.0: Loaded firmware version: 31.532993.0
  715. [ 1393.767327] iwlwifi 0000:01:00.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN
  716. [ 1393.767335] iwlwifi 0000:01:00.0: 0x00000230 | trm_hw_status0
  717. [ 1393.767342] iwlwifi 0000:01:00.0: 0x00000000 | trm_hw_status1
  718. [ 1393.767349] iwlwifi 0000:01:00.0: 0x00010040 | branchlink2
  719. [ 1393.767355] iwlwifi 0000:01:00.0: 0x00028DA6 | interruptlink1
  720. [ 1393.767362] iwlwifi 0000:01:00.0: 0x00028DA6 | interruptlink2
  721. [ 1393.767368] iwlwifi 0000:01:00.0: 0x00000000 | data1
  722. [ 1393.767375] iwlwifi 0000:01:00.0: 0x00000080 | data2
  723. [ 1393.767381] iwlwifi 0000:01:00.0: 0x07830000 | data3
  724. [ 1393.767388] iwlwifi 0000:01:00.0: 0x0E812EF4 | beacon time
  725. [ 1393.767395] iwlwifi 0000:01:00.0: 0x36CFE0D9 | tsf low
  726. [ 1393.767401] iwlwifi 0000:01:00.0: 0x00000141 | tsf hi
  727. [ 1393.767408] iwlwifi 0000:01:00.0: 0x00000000 | time gp1
  728. [ 1393.767415] iwlwifi 0000:01:00.0: 0x52DB2210 | time gp2
  729. [ 1393.767421] iwlwifi 0000:01:00.0: 0x00000001 | uCode revision type
  730. [ 1393.767428] iwlwifi 0000:01:00.0: 0x0000001F | uCode version major
  731. [ 1393.767435] iwlwifi 0000:01:00.0: 0x00082201 | uCode version minor
  732. [ 1393.767441] iwlwifi 0000:01:00.0: 0x00000201 | hw version
  733. [ 1393.767448] iwlwifi 0000:01:00.0: 0x00C89008 | board version
  734. [ 1393.767455] iwlwifi 0000:01:00.0: 0x007F019C | hcmd
  735. [ 1393.767461] iwlwifi 0000:01:00.0: 0x24022002 | isr0
  736. [ 1393.767468] iwlwifi 0000:01:00.0: 0x00800000 | isr1
  737. [ 1393.767474] iwlwifi 0000:01:00.0: 0x0800180A | isr2
  738. [ 1393.767481] iwlwifi 0000:01:00.0: 0x004144C0 | isr3
  739. [ 1393.767487] iwlwifi 0000:01:00.0: 0x00000000 | isr4
  740. [ 1393.767493] iwlwifi 0000:01:00.0: 0x98FC009D | last cmd Id
  741. [ 1393.767500] iwlwifi 0000:01:00.0: 0x00000000 | wait_event
  742. [ 1393.767507] iwlwifi 0000:01:00.0: 0x00000080 | l2p_control
  743. [ 1393.767513] iwlwifi 0000:01:00.0: 0x00010030 | l2p_duration
  744. [ 1393.767520] iwlwifi 0000:01:00.0: 0x0000003F | l2p_mhvalid
  745. [ 1393.767526] iwlwifi 0000:01:00.0: 0x000000CE | l2p_addr_match
  746. [ 1393.767533] iwlwifi 0000:01:00.0: 0x0000000D | lmpm_pmg_sel
  747. [ 1393.767539] iwlwifi 0000:01:00.0: 0x15062149 | timestamp
  748. [ 1393.767546] iwlwifi 0000:01:00.0: 0x00341020 | flow_handler
  749. [ 1393.767623] iwlwifi 0000:01:00.0: 0x00000000 | ADVANCED_SYSASSERT
  750. [ 1393.767630] iwlwifi 0000:01:00.0: 0x00000000 | umac branchlink1
  751. [ 1393.767636] iwlwifi 0000:01:00.0: 0x00000000 | umac branchlink2
  752. [ 1393.767643] iwlwifi 0000:01:00.0: 0x00000000 | umac interruptlink1
  753. [ 1393.767649] iwlwifi 0000:01:00.0: 0x00000000 | umac interruptlink2
  754. [ 1393.767655] iwlwifi 0000:01:00.0: 0x00000000 | umac data1
  755. [ 1393.767662] iwlwifi 0000:01:00.0: 0x00000000 | umac data2
  756. [ 1393.767668] iwlwifi 0000:01:00.0: 0x00000000 | umac data3
  757. [ 1393.767674] iwlwifi 0000:01:00.0: 0x00000000 | umac major
  758. [ 1393.767681] iwlwifi 0000:01:00.0: 0x00000000 | umac minor
  759. [ 1393.767687] iwlwifi 0000:01:00.0: 0x00000000 | frame pointer
  760. [ 1393.767694] iwlwifi 0000:01:00.0: 0x00000000 | stack pointer
  761. [ 1393.767700] iwlwifi 0000:01:00.0: 0x00000000 | last host cmd
  762. [ 1393.767706] iwlwifi 0000:01:00.0: 0x00000000 | isr status reg
  763. [ 1393.767720] ieee80211 phy0: Hardware restart was requested
  764. [ 1457.187606] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=88239 end=88240) time 173 us, min 1073, max 1079, scanline start 1071, end 1082
  765. [ 6752.123125] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
  766. [ 6752.723824] usb-storage 2-1:1.0: USB Mass Storage device detected
  767. [ 6752.724361] scsi host2: usb-storage 2-1:1.0
  768. [ 6752.724820] usbcore: registered new interface driver usb-storage
  769. [ 6752.731435] usbcore: registered new interface driver uas
  770. [ 6753.730168] scsi 2:0:0:0: Direct-Access WD My Passport 0820 1007 PQ: 0 ANSI: 6
  771. [ 6753.730654] scsi 2:0:0:1: Enclosure WD SES Device 1007 PQ: 0 ANSI: 6
  772. [ 6753.732475] sd 2:0:0:0: Attached scsi generic sg1 type 0
  773. [ 6753.733280] scsi 2:0:0:1: Attached scsi generic sg2 type 13
  774. [ 6753.736864] sd 2:0:0:0: [sdb] Spinning up disk...
  775. [ 6754.743135] .
  776. [ 6759.386944] scsi 2:0:0:1: Wrong diagnostic page; asked for 1 got 8
  777. [ 6759.386949] scsi 2:0:0:1: Failed to get diagnostic page 0x1
  778. [ 6759.386952] scsi 2:0:0:1: Failed to bind enclosure -19
  779. [ 6759.386972] ses 2:0:0:1: Attached Enclosure device
  780. [ 6759.388600] ready
  781. [ 6759.390109] sd 2:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)
  782. [ 6759.390994] sd 2:0:0:0: [sdb] Write Protect is off
  783. [ 6759.390996] sd 2:0:0:0: [sdb] Mode Sense: 47 00 10 08
  784. [ 6759.391209] sd 2:0:0:0: [sdb] No Caching mode page found
  785. [ 6759.391213] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  786. [ 6759.403908] sdb: sdb1
  787. [ 6759.405196] sd 2:0:0:0: [sdb] Attached SCSI disk
  788. [ 6766.519406] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
  789. [ 7133.721721] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
  790. [ 7133.721721] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
  791. [ 7133.721723] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
  792. [ 7133.721724] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
  793. [ 7133.721726] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
  794. [ 7133.721729] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
  795. [ 7133.722734] CPU0: Core temperature/speed normal
  796. [ 7133.722734] CPU3: Package temperature/speed normal
  797. [ 7133.722735] CPU1: Package temperature/speed normal
  798. [ 7133.722735] CPU2: Core temperature/speed normal
  799. [ 7133.722736] CPU2: Package temperature/speed normal
  800. [ 7133.722736] CPU0: Package temperature/speed normal
  801. [ 9994.732530] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
  802. [ 9994.754855] scsi host3: uas
  803. [ 9994.755766] scsi 3:0:0:0: Direct-Access Seagate BUP BK 0304 PQ: 0 ANSI: 6
  804. [ 9994.757151] sd 3:0:0:0: Attached scsi generic sg3 type 0
  805. [ 9994.757316] sd 3:0:0:0: [sdc] Spinning up disk...
  806. [ 9995.779239] .
  807. [ 9996.792276] .
  808. [ 9997.805647] .
  809. [ 9998.818975] .
  810. [ 9999.832401] .
  811. [10000.845523] .
  812. [10001.858921] .
  813. [10001.859232] ready
  814. [10001.859667] sd 3:0:0:0: [sdc] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
  815. [10001.859677] sd 3:0:0:0: [sdc] 2048-byte physical blocks
  816. [10002.237742] sd 3:0:0:0: [sdc] Write Protect is off
  817. [10002.237751] sd 3:0:0:0: [sdc] Mode Sense: 4f 00 00 00
  818. [10002.237952] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  819. [10002.407575] sdc: sdc1
  820. [10002.409456] sd 3:0:0:0: [sdc] Attached SCSI disk
  821. [10006.599477] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
  822. [10394.828263] usb 2-2: USB disconnect, device number 3
  823. [10394.842043] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
  824. [10395.048380] sd 3:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=0x00
  825. [11654.089612] xhci_hcd 0000:00:14.0: Cannot set link state.
  826. [11654.089616] usb usb2-port1: cannot disable (err = -32)
  827. [11654.089620] usb 2-1: USB disconnect, device number 2
  828. [12029.242168] wlp1s0: deauthenticating from 70:3a:cb:29:33:a3 by local choice (Reason: 3=DEAUTH_LEAVING)
  829. [12029.247500] wlp1s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
  830. [12029.252414] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  831. [12030.030485] PM: suspend entry (deep)
  832. [12030.030487] PM: Syncing filesystems ... done.
  833. [12030.066480] Freezing user space processes ... (elapsed 0.002 seconds) done.
  834. [12030.068545] OOM killer disabled.
  835. [12030.068546] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  836. [12030.069793] Suspending console(s) (use no_console_suspend to debug)
  837. [12030.070298] sd 1:0:0:0: [sda] Synchronizing SCSI cache
  838. [12030.070347] sd 1:0:0:0: [sda] Stopping disk
  839. [12030.400128] ACPI: Preparing to enter system sleep state S3
  840. [12030.479235] ACPI: EC: event blocked
  841. [12030.479237] ACPI: EC: EC stopped
  842. [12030.479238] PM: Saving platform NVS memory
  843. [12030.479398] Disabling non-boot CPUs ...
  844. [12030.504129] smpboot: CPU 1 is now offline
  845. [12030.542016] smpboot: CPU 2 is now offline
  846. [12030.560682] smpboot: CPU 3 is now offline
  847. [12030.564545] ACPI: Low-level resume complete
  848. [12030.564656] ACPI: EC: EC started
  849. [12030.564656] PM: Restoring platform NVS memory
  850. [12030.566829] Enabling non-boot CPUs ...
  851. [12030.566865] x86: Booting SMP configuration:
  852. [12030.566866] smpboot: Booting Node 0 Processor 1 APIC 0x2
  853. [12030.568771] cache: parent cpu1 should not be sleeping
  854. [12030.568973] CPU1 is up
  855. [12030.568992] smpboot: Booting Node 0 Processor 2 APIC 0x1
  856. [12030.570733] cache: parent cpu2 should not be sleeping
  857. [12030.570924] CPU2 is up
  858. [12030.570945] smpboot: Booting Node 0 Processor 3 APIC 0x3
  859. [12030.572495] cache: parent cpu3 should not be sleeping
  860. [12030.572681] CPU3 is up
  861. [12030.576408] ACPI: Waking up from system sleep state S3
  862. [12030.894676] ACPI: EC: event unblocked
  863. [12030.894842] ACPI: button: The lid device is not compliant to SW_LID.
  864. [12030.895326] sd 1:0:0:0: [sda] Starting disk
  865. [12031.142315] OOM killer enabled.
  866. [12031.142316] Restarting tasks ...
  867. [12031.148060] [drm] RC6 on
  868. [12031.153441] done.
  869. [12031.154546] thermal thermal_zone7: failed to read out thermal zone (-61)
  870. [12031.160078] PM: suspend exit
  871. [12031.204805] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  872. [12031.208267] ata2.00: configured for UDMA/133
  873. [12031.369304] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  874. [12031.369679] enp2s0: 0xffffbfe3c10ef000, 98:83:89:6c:49:7a, IRQ 125
  875. [12031.429295] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  876. [12031.430718] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  877. [12031.664730] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  878. [12031.909787] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  879. [12032.205008] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  880. [12035.559898] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  881. [12037.183450] wlp1s0: authenticate with 70:3a:cb:29:33:a3
  882. [12037.190846] wlp1s0: send auth to 70:3a:cb:29:33:a3 (try 1/3)
  883. [12037.197683] wlp1s0: authenticated
  884. [12037.200276] wlp1s0: associate with 70:3a:cb:29:33:a3 (try 1/3)
  885. [12037.204900] wlp1s0: RX AssocResp from 70:3a:cb:29:33:a3 (capab=0x11 status=0 aid=1)
  886. [12037.208457] wlp1s0: associated
  887. [12037.208610] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
  888. [14578.400875] [drm] GPU HANG: ecode 9:0:0x85dffffb, in Xorg [531], reason: Hang on rcs0, action: reset
  889. [14578.400876] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
  890. [14578.400877] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
  891. [14578.400877] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
  892. [14578.400877] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
  893. [14578.400878] [drm] GPU crash dump saved to /sys/class/drm/card0/error
  894. [14578.400883] i915 0000:00:02.0: Resetting rcs0 after gpu hang
  895. [14581.376612] asynchronous wait on fence i915:kwin_x11[816]/1:36b58 timed out
  896. [14586.496719] i915 0000:00:02.0: Resetting rcs0 after gpu hang
  897. [14594.390029] i915 0000:00:02.0: Resetting rcs0 after gpu hang
  898. [14602.496681] i915 0000:00:02.0: Resetting rcs0 after gpu hang
  899. [14616.363352] i915 0000:00:02.0: Resetting rcs0 after gpu hang
  900. [14616.574431] traps: ksmserver[787] general protection ip:7f8838b3a0c8 sp:7ffee24ba390 error:0 in libQt5Core.so.5.9.3[7f88389a5000+4e2000]
  901. [14618.450668] wlp1s0: deauthenticating from 70:3a:cb:29:33:a3 by local choice (Reason: 3=DEAUTH_LEAVING)
  902. [14618.459289] wlp1s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
  903. [14618.467655] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  904. [14652.537872] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  905. [14652.550932] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  906. [14652.553103] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  907. [14660.158118] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  908. [14665.279354] wlp1s0: authenticate with 70:3a:cb:29:33:a3
  909. [14665.286613] wlp1s0: send auth to 70:3a:cb:29:33:a3 (try 1/3)
  910. [14665.289903] wlp1s0: authenticated
  911. [14665.293201] wlp1s0: associate with 70:3a:cb:29:33:a3 (try 1/3)
  912. [14665.297408] wlp1s0: RX AssocResp from 70:3a:cb:29:33:a3 (capab=0x11 status=0 aid=3)
  913. [14665.302170] wlp1s0: associated
  914. [14665.302301] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
  915. [17017.292658] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=299111 end=299112) time 196 us, min 1073, max 1079, scanline start 1069, end 1082
  916. [17064.933205] device-mapper: uevent: version 1.0.3
  917. [17064.933280] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
  918. [17067.691173] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  919. [17067.698031] JFS: nTxBlock = 8192, nTxLock = 65536
  920. [17067.709777] ntfs: driver 2.1.32 [Flags: R/W MODULE].
  921. [17067.782490] raid6: sse2x1 gen() 9601 MB/s
  922. [17067.839146] raid6: sse2x1 xor() 7795 MB/s
  923. [17067.895815] raid6: sse2x2 gen() 11613 MB/s
  924. [17067.952479] raid6: sse2x2 xor() 9414 MB/s
  925. [17068.009155] raid6: sse2x4 gen() 13320 MB/s
  926. [17068.065833] raid6: sse2x4 xor() 9621 MB/s
  927. [17068.122483] raid6: avx2x1 gen() 20267 MB/s
  928. [17068.179146] raid6: avx2x1 xor() 15593 MB/s
  929. [17068.235814] raid6: avx2x2 gen() 23387 MB/s
  930. [17068.292483] raid6: avx2x2 xor() 17288 MB/s
  931. [17068.349169] raid6: avx2x4 gen() 27405 MB/s
  932. [17068.405839] raid6: avx2x4 xor() 19283 MB/s
  933. [17068.405841] raid6: using algorithm avx2x4 gen() 27405 MB/s
  934. [17068.405841] raid6: .... xor() 19283 MB/s, rmw enabled
  935. [17068.405842] raid6: using avx2x2 recovery algorithm
  936. [17068.410179] xor: automatically using best checksumming function avx
  937. [17068.438409] Btrfs loaded, crc32c=crc32c-intel
  938. [34790.359094] wlp1s0: deauthenticating from 70:3a:cb:29:33:a3 by local choice (Reason: 3=DEAUTH_LEAVING)
  939. [34790.368520] wlp1s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
  940. [34790.374074] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  941. [34790.684929] PM: suspend entry (deep)
  942. [34790.684931] PM: Syncing filesystems ... done.
  943. [34790.715858] Freezing user space processes ... (elapsed 0.002 seconds) done.
  944. [34790.718797] OOM killer disabled.
  945. [34790.718799] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  946. [34790.721315] Suspending console(s) (use no_console_suspend to debug)
  947. [34790.722709] sd 1:0:0:0: [sda] Synchronizing SCSI cache
  948. [34790.722888] sd 1:0:0:0: [sda] Stopping disk
  949. [34791.050683] ACPI: Preparing to enter system sleep state S3
  950. [34791.132557] ACPI: EC: event blocked
  951. [34791.132559] ACPI: EC: EC stopped
  952. [34791.132561] PM: Saving platform NVS memory
  953. [34791.132796] Disabling non-boot CPUs ...
  954. [34791.161013] smpboot: CPU 1 is now offline
  955. [34791.182676] smpboot: CPU 2 is now offline
  956. [34791.207452] smpboot: CPU 3 is now offline
  957. [34791.211875] ACPI: Low-level resume complete
  958. [34791.211987] ACPI: EC: EC started
  959. [34791.211988] PM: Restoring platform NVS memory
  960. [34791.214147] Enabling non-boot CPUs ...
  961. [34791.214184] x86: Booting SMP configuration:
  962. [34791.214185] smpboot: Booting Node 0 Processor 1 APIC 0x2
  963. [34791.216089] cache: parent cpu1 should not be sleeping
  964. [34791.216291] CPU1 is up
  965. [34791.216309] smpboot: Booting Node 0 Processor 2 APIC 0x1
  966. [34791.218051] cache: parent cpu2 should not be sleeping
  967. [34791.218238] CPU2 is up
  968. [34791.218260] smpboot: Booting Node 0 Processor 3 APIC 0x3
  969. [34791.219901] cache: parent cpu3 should not be sleeping
  970. [34791.220088] CPU3 is up
  971. [34791.223802] ACPI: Waking up from system sleep state S3
  972. [34791.460023] ACPI: EC: event unblocked
  973. [34791.460586] sd 1:0:0:0: [sda] Starting disk
  974. [34791.463686] Bluetooth: hci0 ACL packet for unknown connection handle 3585
  975. [34791.691640] OOM killer enabled.
  976. [34791.691642] Restarting tasks ...
  977. [34791.692902] [drm] RC6 on
  978. [34791.722968] done.
  979. [34791.725849] thermal thermal_zone7: failed to read out thermal zone (-61)
  980. [34791.775287] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  981. [34791.778662] ata2.00: configured for UDMA/133
  982. [34791.841288] PM: suspend exit
  983. [34792.001804] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  984. [34792.002453] enp2s0: 0xffffbfe3c10ef000, 98:83:89:6c:49:7a, IRQ 125
  985. [34792.054509] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  986. [34792.057433] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  987. [34792.290838] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  988. [34792.538301] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  989. [34792.705205] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  990. [34794.670654] usb 1-2: new high-speed USB device number 4 using xhci_hcd
  991. [34795.686430] usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x8D17
  992. [34795.686613] usbcore: registered new interface driver usblp
  993. [34796.103279] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  994. [34797.547849] input: Designer Mouse as /devices/virtual/misc/uhid/0005:045E:0805.0003/input/input21
  995. [34797.548446] hid-generic 0005:045E:0805.0003: input,hidraw2: BLUETOOTH HID v1.00 Mouse [Designer Mouse] on 00:C2:C6:CF:A5:25
  996. [34797.613681] wlp1s0: authenticate with 10:be:f5:d8:7c:9c
  997. [34797.621883] wlp1s0: send auth to 10:be:f5:d8:7c:9c (try 1/3)
  998. [34797.632798] wlp1s0: authenticated
  999. [34797.634086] wlp1s0: associate with 10:be:f5:d8:7c:9c (try 1/3)
  1000. [34797.638553] wlp1s0: RX AssocResp from 10:be:f5:d8:7c:9c (capab=0x411 status=0 aid=1)
  1001. [34797.647737] wlp1s0: associated
  1002. [34797.647908] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
  1003. [34801.003907] usblp0: removed
  1004. [34801.008602] usblp 1-2:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x8D17
  1005. [34842.231854] usblp0: removed
  1006. [35407.401452] usb 1-2: USB disconnect, device number 4
  1007. [36027.379480] wlp1s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
  1008. [36042.999487] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1009. [36043.018214] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1010. [36044.906753] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1011. [36046.505174] wlp1s0: authenticate with 10:be:f5:d8:7c:9c
  1012. [36046.511582] wlp1s0: send auth to 10:be:f5:d8:7c:9c (try 1/3)
  1013. [36046.559384] wlp1s0: send auth to 10:be:f5:d8:7c:9c (try 2/3)
  1014. [36046.618106] wlp1s0: send auth to 10:be:f5:d8:7c:9c (try 3/3)
  1015. [36046.681269] wlp1s0: authentication with 10:be:f5:d8:7c:9c timed out
  1016. [36049.210805] wlp1s0: authenticate with 10:be:f5:d8:7c:9c
  1017. [36049.219105] wlp1s0: send auth to 10:be:f5:d8:7c:9c (try 1/3)
  1018. [36049.221579] wlp1s0: authenticated
  1019. [36049.232727] wlp1s0: associate with 10:be:f5:d8:7c:9c (try 1/3)
  1020. [36049.244699] wlp1s0: RX AssocResp from 10:be:f5:d8:7c:9c (capab=0x411 status=0 aid=1)
  1021. [36049.247873] wlp1s0: associated
  1022. [36049.248014] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
  1023. [37736.602260] wlp1s0: deauthenticating from 10:be:f5:d8:7c:9c by local choice (Reason: 3=DEAUTH_LEAVING)
  1024. [37736.609246] wlp1s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
  1025. [37736.617783] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1026. [37737.101952] PM: suspend entry (deep)
  1027. [37737.101954] PM: Syncing filesystems ... done.
  1028. [37737.161490] Freezing user space processes ... (elapsed 0.004 seconds) done.
  1029. [37737.165779] OOM killer disabled.
  1030. [37737.165781] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1031. [37737.167505] Suspending console(s) (use no_console_suspend to debug)
  1032. [37737.171057] sd 1:0:0:0: [sda] Synchronizing SCSI cache
  1033. [37737.171459] sd 1:0:0:0: [sda] Stopping disk
  1034. [37737.494841] ACPI: Preparing to enter system sleep state S3
  1035. [37737.573961] ACPI: EC: event blocked
  1036. [37737.573962] ACPI: EC: EC stopped
  1037. [37737.573964] PM: Saving platform NVS memory
  1038. [37737.574124] Disabling non-boot CPUs ...
  1039. [37737.602139] smpboot: CPU 1 is now offline
  1040. [37737.623141] smpboot: CPU 2 is now offline
  1041. [37737.635375] smpboot: CPU 3 is now offline
  1042. [37737.639187] ACPI: Low-level resume complete
  1043. [37737.639297] ACPI: EC: EC started
  1044. [37737.639298] PM: Restoring platform NVS memory
  1045. [37737.641470] Enabling non-boot CPUs ...
  1046. [37737.641508] x86: Booting SMP configuration:
  1047. [37737.641509] smpboot: Booting Node 0 Processor 1 APIC 0x2
  1048. [37737.643421] cache: parent cpu1 should not be sleeping
  1049. [37737.643627] CPU1 is up
  1050. [37737.643646] smpboot: Booting Node 0 Processor 2 APIC 0x1
  1051. [37737.645391] cache: parent cpu2 should not be sleeping
  1052. [37737.645581] CPU2 is up
  1053. [37737.645604] smpboot: Booting Node 0 Processor 3 APIC 0x3
  1054. [37737.647149] cache: parent cpu3 should not be sleeping
  1055. [37737.647338] CPU3 is up
  1056. [37737.650988] ACPI: Waking up from system sleep state S3
  1057. [37737.904110] ACPI: EC: event unblocked
  1058. [37737.904627] sd 1:0:0:0: [sda] Starting disk
  1059. [37738.135742] OOM killer enabled.
  1060. [37738.135744] Restarting tasks ...
  1061. [37738.137736] [drm] RC6 on
  1062. [37738.145247] done.
  1063. [37738.146604] thermal thermal_zone7: failed to read out thermal zone (-61)
  1064. [37738.217118] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1065. [37738.220475] ata2.00: configured for UDMA/133
  1066. [37738.259060] PM: suspend exit
  1067. [37738.421329] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  1068. [37738.422130] enp2s0: 0xffffbfe3c10ef000, 98:83:89:6c:49:7a, IRQ 125
  1069. [37738.471805] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  1070. [37738.473598] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1071. [37738.707213] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1072. [37738.953845] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1073. [37739.150157] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1074. [37742.476408] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1075. [37744.107022] wlp1s0: authenticate with 20:b3:99:e5:08:02
  1076. [37744.114374] wlp1s0: send auth to 20:b3:99:e5:08:02 (try 1/3)
  1077. [37744.120888] wlp1s0: authenticated
  1078. [37744.124746] wlp1s0: associate with 20:b3:99:e5:08:02 (try 1/3)
  1079. [37744.126916] wlp1s0: RX AssocResp from 20:b3:99:e5:08:02 (capab=0x411 status=0 aid=1)
  1080. [37744.128521] wlp1s0: associated
  1081. [37744.128660] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
  1082. [42345.987014] Bluetooth: hci0 advertising data length corrected
  1083. [50302.953297] wlp1s0: deauthenticating from 20:b3:99:e5:08:02 by local choice (Reason: 3=DEAUTH_LEAVING)
  1084. [50302.964096] wlp1s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
  1085. [50302.964148] wlp1s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
  1086. [50302.980608] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1087. [50303.750395] PM: suspend entry (deep)
  1088. [50303.750399] PM: Syncing filesystems ... done.
  1089. [50303.785000] Freezing user space processes ... (elapsed 0.002 seconds) done.
  1090. [50303.787568] OOM killer disabled.
  1091. [50303.787569] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1092. [50303.788806] Suspending console(s) (use no_console_suspend to debug)
  1093. [50303.789314] sd 1:0:0:0: [sda] Synchronizing SCSI cache
  1094. [50303.790114] sd 1:0:0:0: [sda] Stopping disk
  1095. [50304.123590] ACPI: Preparing to enter system sleep state S3
  1096. [50304.205457] ACPI: EC: event blocked
  1097. [50304.205459] ACPI: EC: EC stopped
  1098. [50304.205461] PM: Saving platform NVS memory
  1099. [50304.205690] Disabling non-boot CPUs ...
  1100. [50304.233961] smpboot: CPU 1 is now offline
  1101. [50304.265575] smpboot: CPU 2 is now offline
  1102. [50304.293680] smpboot: CPU 3 is now offline
  1103. [50304.298081] ACPI: Low-level resume complete
  1104. [50304.298191] ACPI: EC: EC started
  1105. [50304.298191] PM: Restoring platform NVS memory
  1106. [50304.300352] Enabling non-boot CPUs ...
  1107. [50304.300389] x86: Booting SMP configuration:
  1108. [50304.300390] smpboot: Booting Node 0 Processor 1 APIC 0x2
  1109. [50304.302306] cache: parent cpu1 should not be sleeping
  1110. [50304.302513] CPU1 is up
  1111. [50304.302531] smpboot: Booting Node 0 Processor 2 APIC 0x1
  1112. [50304.304272] cache: parent cpu2 should not be sleeping
  1113. [50304.304458] CPU2 is up
  1114. [50304.304479] smpboot: Booting Node 0 Processor 3 APIC 0x3
  1115. [50304.306126] cache: parent cpu3 should not be sleeping
  1116. [50304.306316] CPU3 is up
  1117. [50304.310026] ACPI: Waking up from system sleep state S3
  1118. [50304.563563] ACPI: EC: event unblocked
  1119. [50304.564320] sd 1:0:0:0: [sda] Starting disk
  1120. [50304.796074] OOM killer enabled.
  1121. [50304.796075] Restarting tasks ... done.
  1122. [50304.811366] thermal thermal_zone7: failed to read out thermal zone (-61)
  1123. [50304.816780] PM: suspend exit
  1124. [50304.827921] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  1125. [50304.828687] enp2s0: 0xffffbfe3c10ef000, 98:83:89:6c:49:7a, IRQ 125
  1126. [50304.877142] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1127. [50304.880501] ata2.00: configured for UDMA/133
  1128. [50304.914561] [drm] RC6 on
  1129. [50304.937588] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  1130. [50304.938804] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1131. [50305.172027] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1132. [50305.419155] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1133. [50305.758037] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1134. [50309.114829] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1135. [50311.196694] wlp1s0: authenticate with 70:3a:cb:29:33:a3
  1136. [50311.204074] wlp1s0: send auth to 70:3a:cb:29:33:a3 (try 1/3)
  1137. [50311.210047] wlp1s0: authenticated
  1138. [50311.213698] wlp1s0: associate with 70:3a:cb:29:33:a3 (try 1/3)
  1139. [50311.218080] wlp1s0: RX AssocResp from 70:3a:cb:29:33:a3 (capab=0x11 status=0 aid=2)
  1140. [50311.219787] wlp1s0: associated
  1141. [50311.219836] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
  1142. [63017.987748] wlp1s0: deauthenticating from 70:3a:cb:29:33:a3 by local choice (Reason: 3=DEAUTH_LEAVING)
  1143. [63017.993066] wlp1s0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)
  1144. [63017.997906] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1145. [63018.434708] PM: suspend entry (deep)
  1146. [63018.434710] PM: Syncing filesystems ... done.
  1147. [63018.469426] Freezing user space processes ... (elapsed 0.002 seconds) done.
  1148. [63018.471755] OOM killer disabled.
  1149. [63018.471757] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1150. [63018.473557] Suspending console(s) (use no_console_suspend to debug)
  1151. [63018.474478] sd 1:0:0:0: [sda] Synchronizing SCSI cache
  1152. [63018.474961] sd 1:0:0:0: [sda] Stopping disk
  1153. [63018.799818] ACPI: Preparing to enter system sleep state S3
  1154. [63018.881686] ACPI: EC: event blocked
  1155. [63018.881688] ACPI: EC: EC stopped
  1156. [63018.881690] PM: Saving platform NVS memory
  1157. [63018.881926] Disabling non-boot CPUs ...
  1158. [63018.910202] smpboot: CPU 1 is now offline
  1159. [63018.935141] smpboot: CPU 2 is now offline
  1160. [63018.959917] smpboot: CPU 3 is now offline
  1161. [63018.964409] ACPI: Low-level resume complete
  1162. [63018.964520] ACPI: EC: EC started
  1163. [63018.964520] PM: Restoring platform NVS memory
  1164. [63018.966690] Enabling non-boot CPUs ...
  1165. [63018.966728] x86: Booting SMP configuration:
  1166. [63018.966728] smpboot: Booting Node 0 Processor 1 APIC 0x2
  1167. [63018.968630] cache: parent cpu1 should not be sleeping
  1168. [63018.968837] CPU1 is up
  1169. [63018.968856] smpboot: Booting Node 0 Processor 2 APIC 0x1
  1170. [63018.970500] cache: parent cpu2 should not be sleeping
  1171. [63018.970692] CPU2 is up
  1172. [63018.970714] smpboot: Booting Node 0 Processor 3 APIC 0x3
  1173. [63018.972266] cache: parent cpu3 should not be sleeping
  1174. [63018.972455] CPU3 is up
  1175. [63018.976160] ACPI: Waking up from system sleep state S3
  1176. [63019.212456] ACPI: EC: event unblocked
  1177. [63019.213066] sd 1:0:0:0: [sda] Starting disk
  1178. [63019.444693] OOM killer enabled.
  1179. [63019.444694] Restarting tasks ...
  1180. [63019.445914] [drm] RC6 on
  1181. [63019.466080] done.
  1182. [63019.468197] thermal thermal_zone7: failed to read out thermal zone (-61)
  1183. [63019.527594] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1184. [63019.530918] ata2.00: configured for UDMA/133
  1185. [63019.580344] PM: suspend exit
  1186. [63020.462451] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  1187. [63020.462767] enp2s0: 0xffffbfe3c10ef000, 98:83:89:6c:49:7a, IRQ 125
  1188. [63020.519080] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  1189. [63020.520241] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1190. [63020.751778] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1191. [63020.995300] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1192. [63021.042290] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1193. [63024.354116] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1194. [63025.768433] wlp1s0: authenticate with 70:3a:cb:29:33:a3
  1195. [63025.775497] wlp1s0: send auth to 70:3a:cb:29:33:a3 (try 1/3)
  1196. [63025.781417] wlp1s0: authenticated
  1197. [63025.782768] wlp1s0: associate with 70:3a:cb:29:33:a3 (try 1/3)
  1198. [63025.787219] wlp1s0: RX AssocResp from 70:3a:cb:29:33:a3 (capab=0x11 status=0 aid=1)
  1199. [63025.788965] wlp1s0: associated
  1200. [63025.789011] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
  1201. [75087.517559] usb 2-1: new SuperSpeed USB device number 4 using xhci_hcd
  1202. [75087.536420] usb-storage 2-1:1.0: USB Mass Storage device detected
  1203. [75087.536716] scsi host2: usb-storage 2-1:1.0
  1204. [75088.548193] scsi 2:0:0:0: Direct-Access WD My Passport 0820 1007 PQ: 0 ANSI: 6
  1205. [75088.548538] scsi 2:0:0:1: Enclosure WD SES Device 1007 PQ: 0 ANSI: 6
  1206. [75088.550276] sd 2:0:0:0: Attached scsi generic sg1 type 0
  1207. [75088.550866] ses 2:0:0:1: Attached Enclosure device
  1208. [75088.551242] ses 2:0:0:1: Attached scsi generic sg2 type 13
  1209. [75094.804275] ses 2:0:0:1: Wrong diagnostic page; asked for 1 got 8
  1210. [75094.804291] ses 2:0:0:1: Failed to get diagnostic page 0x1
  1211. [75094.804300] ses 2:0:0:1: Failed to bind enclosure -19
  1212. [75094.804542] sd 2:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)
  1213. [75094.804858] sd 2:0:0:0: [sdb] Write Protect is off
  1214. [75094.804864] sd 2:0:0:0: [sdb] Mode Sense: 47 00 10 08
  1215. [75094.805132] sd 2:0:0:0: [sdb] No Caching mode page found
  1216. [75094.805144] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  1217. [75094.820824] sdb: sdb1
  1218. [75094.822692] sd 2:0:0:0: [sdb] Attached SCSI disk
  1219. [75097.795537] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
  1220. [75320.684474] CPU2: Core temperature above threshold, cpu clock throttled (total events = 13)
  1221. [75320.684475] CPU3: Package temperature above threshold, cpu clock throttled (total events = 13)
  1222. [75320.684476] CPU1: Package temperature above threshold, cpu clock throttled (total events = 13)
  1223. [75320.684477] CPU0: Core temperature above threshold, cpu clock throttled (total events = 13)
  1224. [75320.684479] CPU0: Package temperature above threshold, cpu clock throttled (total events = 13)
  1225. [75320.684483] CPU2: Package temperature above threshold, cpu clock throttled (total events = 13)
  1226. [75320.687494] CPU0: Core temperature/speed normal
  1227. [75320.687494] CPU2: Core temperature/speed normal
  1228. [75320.687495] CPU1: Package temperature/speed normal
  1229. [75320.687496] CPU3: Package temperature/speed normal
  1230. [75320.687497] CPU2: Package temperature/speed normal
  1231. [75320.687498] CPU0: Package temperature/speed normal
  1232. [75620.688474] CPU2: Package temperature/speed normal
  1233. [75620.688476] CPU1: Package temperature/speed normal
  1234. [75620.688476] CPU0: Package temperature/speed normal
  1235. [75620.688477] CPU3: Package temperature/speed normal
  1236. [75621.184512] CPU1: Core temperature above threshold, cpu clock throttled (total events = 15690)
  1237. [75621.184512] CPU3: Core temperature above threshold, cpu clock throttled (total events = 15690)
  1238. [75621.185507] CPU3: Core temperature/speed normal
  1239. [75621.185507] CPU1: Core temperature/speed normal
  1240. [76164.666288] xhci_hcd 0000:00:14.0: Cannot set link state.
  1241. [76164.666303] usb usb2-port1: cannot disable (err = -32)
  1242. [76164.666319] usb 2-1: USB disconnect, device number 4
  1243. [81926.673733] wlp1s0: deauthenticating from 70:3a:cb:29:33:a3 by local choice (Reason: 3=DEAUTH_LEAVING)
  1244. [81926.686517] wlp1s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
  1245. [81926.691339] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1246. [81927.480828] PM: suspend entry (deep)
  1247. [81927.480830] PM: Syncing filesystems ... done.
  1248. [81927.522014] Freezing user space processes ... (elapsed 0.002 seconds) done.
  1249. [81927.524435] OOM killer disabled.
  1250. [81927.524437] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1251. [81927.526161] Suspending console(s) (use no_console_suspend to debug)
  1252. [81927.527249] sd 1:0:0:0: [sda] Synchronizing SCSI cache
  1253. [81927.527334] sd 1:0:0:0: [sda] Stopping disk
  1254. [81927.861943] ACPI: Preparing to enter system sleep state S3
  1255. [81927.941057] ACPI: EC: event blocked
  1256. [81927.941059] ACPI: EC: EC stopped
  1257. [81927.941060] PM: Saving platform NVS memory
  1258. [81927.941224] Disabling non-boot CPUs ...
  1259. [81927.959234] smpboot: CPU 1 is now offline
  1260. [81927.990239] smpboot: CPU 2 is now offline
  1261. [81928.019095] smpboot: CPU 3 is now offline
  1262. [81928.022765] ACPI: Low-level resume complete
  1263. [81928.022875] ACPI: EC: EC started
  1264. [81928.022876] PM: Restoring platform NVS memory
  1265. [81928.025037] Enabling non-boot CPUs ...
  1266. [81928.025075] x86: Booting SMP configuration:
  1267. [81928.025075] smpboot: Booting Node 0 Processor 1 APIC 0x2
  1268. [81928.026982] cache: parent cpu1 should not be sleeping
  1269. [81928.027188] CPU1 is up
  1270. [81928.027207] smpboot: Booting Node 0 Processor 2 APIC 0x1
  1271. [81928.028965] cache: parent cpu2 should not be sleeping
  1272. [81928.029154] CPU2 is up
  1273. [81928.029176] smpboot: Booting Node 0 Processor 3 APIC 0x3
  1274. [81928.030727] cache: parent cpu3 should not be sleeping
  1275. [81928.030919] CPU3 is up
  1276. [81928.034624] ACPI: Waking up from system sleep state S3
  1277. [81928.271330] ACPI: EC: event unblocked
  1278. [81928.271953] sd 1:0:0:0: [sda] Starting disk
  1279. [81928.504629] OOM killer enabled.
  1280. [81928.504630] Restarting tasks ...
  1281. [81928.509520] [drm] RC6 on
  1282. [81928.519923] done.
  1283. [81928.521768] thermal thermal_zone7: failed to read out thermal zone (-61)
  1284. [81928.585331] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1285. [81928.588683] ata2.00: configured for UDMA/133
  1286. [81928.646241] PM: suspend exit
  1287. [81928.778671] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  1288. [81928.779456] enp2s0: 0xffffbfe3c10ef000, 98:83:89:6c:49:7a, IRQ 125
  1289. [81928.832055] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  1290. [81928.835279] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1291. [81929.069017] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1292. [81929.316472] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1293. [81929.581135] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1294. [81932.944573] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1295. [81934.358976] wlp1s0: authenticate with 70:3a:cb:29:33:a3
  1296. [81934.366704] wlp1s0: send auth to 70:3a:cb:29:33:a3 (try 1/3)
  1297. [81934.374944] wlp1s0: authenticated
  1298. [81934.378389] wlp1s0: associate with 70:3a:cb:29:33:a3 (try 1/3)
  1299. [81934.383535] wlp1s0: RX AssocResp from 70:3a:cb:29:33:a3 (capab=0x11 status=0 aid=2)
  1300. [81934.385362] wlp1s0: associated
  1301. [81934.385440] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
  1302. [83789.343164] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 frozen
  1303. [83789.343171] ata2.00: irq_stat 0x08000000, interface fatal error
  1304. [83789.343177] ata2: SError: { UnrecovData Handshk }
  1305. [83789.343182] ata2.00: failed command: WRITE DMA EXT
  1306. [83789.343192] ata2.00: cmd 35/00:30:c0:b1:2d/00:07:15:00:00/e0 tag 11 dma 942080 out
  1307. [83789.343196] ata2.00: status: { DRDY }
  1308. [83789.343203] ata2: hard resetting link
  1309. [83789.653464] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1310. [83789.657558] ata2.00: configured for UDMA/133
  1311. [83789.657605] ata2: EH complete
  1312. [84125.222526] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 frozen
  1313. [84125.222530] ata2.00: irq_stat 0x08000000, interface fatal error
  1314. [84125.222532] ata2: SError: { UnrecovData Handshk }
  1315. [84125.222534] ata2.00: failed command: WRITE DMA EXT
  1316. [84125.222537] ata2.00: cmd 35/00:f8:80:22:21/00:00:15:00:00/e0 tag 8 dma 126976 out
  1317. [84125.222539] ata2.00: status: { DRDY }
  1318. [84125.222541] ata2: hard resetting link
  1319. [84125.535616] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1320. [84125.538867] ata2.00: configured for UDMA/133
  1321. [84125.538883] ata2: EH complete
  1322. [87013.331632] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 frozen
  1323. [87013.331646] ata2.00: irq_stat 0x08000000, interface fatal error
  1324. [87013.331654] ata2: SError: { UnrecovData Handshk }
  1325. [87013.331663] ata2.00: failed command: WRITE DMA EXT
  1326. [87013.331679] ata2.00: cmd 35/00:08:28:3f:dd/00:00:14:00:00/e0 tag 16 dma 4096 out
  1327. [87013.331687] ata2.00: status: { DRDY }
  1328. [87013.331697] ata2: hard resetting link
  1329. [87013.643537] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1330. [87013.647487] ata2.00: configured for UDMA/133
  1331. [87013.647524] ata2: EH complete
  1332. [87043.208405] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 frozen
  1333. [87043.208409] ata2.00: irq_stat 0x08000000, interface fatal error
  1334. [87043.208410] ata2: SError: { UnrecovData Handshk }
  1335. [87043.208412] ata2.00: failed command: WRITE DMA EXT
  1336. [87043.208415] ata2.00: cmd 35/00:40:98:80:d6/00:01:14:00:00/e0 tag 9 dma 163840 out
  1337. [87043.208416] ata2.00: status: { DRDY }
  1338. [87043.208418] ata2: hard resetting link
  1339. [87043.518838] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1340. [87043.522406] ata2.00: configured for UDMA/133
  1341. [87043.522418] ata2: EH complete
  1342. [87048.984906] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 frozen
  1343. [87048.984924] ata2.00: irq_stat 0x08000000, interface fatal error
  1344. [87048.984936] ata2: SError: { UnrecovData Handshk }
  1345. [87048.984950] ata2.00: failed command: WRITE DMA EXT
  1346. [87048.984978] ata2.00: cmd 35/00:c8:58:fb:19/00:00:15:00:00/e0 tag 11 dma 102400 out
  1347. [87048.984991] ata2.00: status: { DRDY }
  1348. [87048.985007] ata2: hard resetting link
  1349. [87049.295067] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1350. [87049.298792] ata2.00: configured for UDMA/133
  1351. [87049.298831] ata2: EH complete
  1352. [87200.412360] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=211132 end=211133) time 193 us, min 1073, max 1079, scanline start 1072, end 1085
  1353. [87601.240953] usb 2-1: new SuperSpeed USB device number 5 using xhci_hcd
  1354. [87601.260894] usb-storage 2-1:1.0: USB Mass Storage device detected
  1355. [87601.261307] scsi host2: usb-storage 2-1:1.0
  1356. [87602.267757] scsi 2:0:0:0: Direct-Access WD My Passport 0820 1007 PQ: 0 ANSI: 6
  1357. [87602.267903] scsi 2:0:0:1: Enclosure WD SES Device 1007 PQ: 0 ANSI: 6
  1358. [87602.268707] sd 2:0:0:0: Attached scsi generic sg1 type 0
  1359. [87602.268773] ses 2:0:0:1: Attached Enclosure device
  1360. [87602.268829] ses 2:0:0:1: Attached scsi generic sg2 type 13
  1361. [87608.431194] ses 2:0:0:1: Wrong diagnostic page; asked for 1 got 8
  1362. [87608.431214] ses 2:0:0:1: Failed to get diagnostic page 0x1
  1363. [87608.431228] ses 2:0:0:1: Failed to bind enclosure -19
  1364. [87608.431543] sd 2:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)
  1365. [87608.431860] sd 2:0:0:0: [sdb] Write Protect is off
  1366. [87608.431867] sd 2:0:0:0: [sdb] Mode Sense: 47 00 10 08
  1367. [87608.432141] sd 2:0:0:0: [sdb] No Caching mode page found
  1368. [87608.432153] sd 2:0:0:0: [sdb] Assuming drive cache: write through
  1369. [87608.447865] sdb: sdb1
  1370. [87608.449309] sd 2:0:0:0: [sdb] Attached SCSI disk
  1371. [87613.513403] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
  1372. [87883.580958] usb 2-4: new SuperSpeed USB device number 6 using xhci_hcd
  1373. [87883.603472] usb-storage 2-4:1.0: USB Mass Storage device detected
  1374. [87883.605110] scsi host3: usb-storage 2-4:1.0
  1375. [87884.615963] scsi 3:0:0:0: Direct-Access Generic STORAGE DEVICE 0819 PQ: 0 ANSI: 6
  1376. [87884.617189] sd 3:0:0:0: Attached scsi generic sg3 type 0
  1377. [87885.074764] sd 3:0:0:0: [sdc] 124735488 512-byte logical blocks: (63.9 GB/59.5 GiB)
  1378. [87885.075444] sd 3:0:0:0: [sdc] Write Protect is off
  1379. [87885.075451] sd 3:0:0:0: [sdc] Mode Sense: 87 00 00 00
  1380. [87885.076095] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  1381. [87885.079444] sdc: sdc1
  1382. [87885.081490] sd 3:0:0:0: [sdc] Attached SCSI removable disk
  1383. [88648.535878] CPU2: Core temperature above threshold, cpu clock throttled (total events = 20626)
  1384. [88648.535879] CPU0: Core temperature above threshold, cpu clock throttled (total events = 20626)
  1385. [88648.535881] CPU1: Package temperature above threshold, cpu clock throttled (total events = 29620)
  1386. [88648.535882] CPU3: Package temperature above threshold, cpu clock throttled (total events = 29620)
  1387. [88648.535884] CPU0: Package temperature above threshold, cpu clock throttled (total events = 29620)
  1388. [88648.535887] CPU2: Package temperature above threshold, cpu clock throttled (total events = 29620)
  1389. [88648.536827] CPU0: Core temperature/speed normal
  1390. [88648.536828] CPU2: Core temperature/speed normal
  1391. [88648.536828] CPU3: Package temperature/speed normal
  1392. [88648.536829] CPU1: Package temperature/speed normal
  1393. [88648.536829] CPU2: Package temperature/speed normal
  1394. [88648.536830] CPU0: Package temperature/speed normal
  1395. [89304.845643] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 frozen
  1396. [89304.845651] ata2.00: irq_stat 0x08000000, interface fatal error
  1397. [89304.845654] ata2: SError: { UnrecovData Handshk }
  1398. [89304.845657] ata2.00: failed command: WRITE DMA EXT
  1399. [89304.845662] ata2.00: cmd 35/00:68:10:ff:b8/00:00:14:00:00/e0 tag 16 dma 53248 out
  1400. [89304.845665] ata2.00: status: { DRDY }
  1401. [89304.845669] ata2: hard resetting link
  1402. [89305.158825] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1403. [89305.162236] ata2.00: configured for UDMA/133
  1404. [89305.162317] ata2: EH complete
  1405. [90368.740833] CPU2: Core temperature above threshold, cpu clock throttled (total events = 21038)
  1406. [90368.740834] CPU0: Core temperature above threshold, cpu clock throttled (total events = 21038)
  1407. [90368.740836] CPU3: Package temperature above threshold, cpu clock throttled (total events = 30054)
  1408. [90368.740837] CPU1: Package temperature above threshold, cpu clock throttled (total events = 30054)
  1409. [90368.740839] CPU0: Package temperature above threshold, cpu clock throttled (total events = 30054)
  1410. [90368.740843] CPU2: Package temperature above threshold, cpu clock throttled (total events = 30054)
  1411. [90368.741854] CPU0: Core temperature/speed normal
  1412. [90368.741855] CPU2: Core temperature/speed normal
  1413. [90368.741855] CPU1: Package temperature/speed normal
  1414. [90368.741856] CPU3: Package temperature/speed normal
  1415. [90368.741856] CPU2: Package temperature/speed normal
  1416. [90368.741858] CPU0: Package temperature/speed normal
  1417. [90859.619835] CPU0: Core temperature above threshold, cpu clock throttled (total events = 21048)
  1418. [90859.619836] CPU2: Core temperature above threshold, cpu clock throttled (total events = 21048)
  1419. [90859.619837] CPU3: Package temperature above threshold, cpu clock throttled (total events = 30064)
  1420. [90859.619838] CPU1: Package temperature above threshold, cpu clock throttled (total events = 30064)
  1421. [90859.619840] CPU2: Package temperature above threshold, cpu clock throttled (total events = 30064)
  1422. [90859.619844] CPU0: Package temperature above threshold, cpu clock throttled (total events = 30064)
  1423. [90859.620843] CPU0: Core temperature/speed normal
  1424. [90859.620843] CPU2: Core temperature/speed normal
  1425. [90859.620844] CPU1: Package temperature/speed normal
  1426. [90859.620844] CPU3: Package temperature/speed normal
  1427. [90859.620845] CPU2: Package temperature/speed normal
  1428. [90859.620846] CPU0: Package temperature/speed normal
  1429. [91186.601863] CPU0: Core temperature above threshold, cpu clock throttled (total events = 21138)
  1430. [91186.601864] CPU2: Core temperature above threshold, cpu clock throttled (total events = 21138)
  1431. [91186.601866] CPU3: Package temperature above threshold, cpu clock throttled (total events = 30154)
  1432. [91186.601867] CPU1: Package temperature above threshold, cpu clock throttled (total events = 30154)
  1433. [91186.601869] CPU2: Package temperature above threshold, cpu clock throttled (total events = 30154)
  1434. [91186.601872] CPU0: Package temperature above threshold, cpu clock throttled (total events = 30154)
  1435. [91186.602872] CPU2: Core temperature/speed normal
  1436. [91186.602873] CPU0: Core temperature/speed normal
  1437. [91186.602873] CPU1: Package temperature/speed normal
  1438. [91186.602874] CPU3: Package temperature/speed normal
  1439. [91186.602874] CPU0: Package temperature/speed normal
  1440. [91186.602875] CPU2: Package temperature/speed normal
  1441. [91727.310841] CPU0: Core temperature above threshold, cpu clock throttled (total events = 21156)
  1442. [91727.310842] CPU2: Core temperature above threshold, cpu clock throttled (total events = 21156)
  1443. [91727.310843] CPU3: Package temperature above threshold, cpu clock throttled (total events = 30172)
  1444. [91727.310844] CPU1: Package temperature above threshold, cpu clock throttled (total events = 30172)
  1445. [91727.310846] CPU2: Package temperature above threshold, cpu clock throttled (total events = 30172)
  1446. [91727.310849] CPU0: Package temperature above threshold, cpu clock throttled (total events = 30172)
  1447. [91727.311857] CPU0: Core temperature/speed normal
  1448. [91727.311858] CPU2: Core temperature/speed normal
  1449. [91727.311858] CPU3: Package temperature/speed normal
  1450. [91727.311859] CPU1: Package temperature/speed normal
  1451. [91727.311859] CPU2: Package temperature/speed normal
  1452. [91727.311860] CPU0: Package temperature/speed normal
  1453. [92101.505842] CPU0: Core temperature above threshold, cpu clock throttled (total events = 21194)
  1454. [92101.505842] CPU2: Core temperature above threshold, cpu clock throttled (total events = 21194)
  1455. [92101.505845] CPU3: Package temperature above threshold, cpu clock throttled (total events = 30210)
  1456. [92101.505846] CPU1: Package temperature above threshold, cpu clock throttled (total events = 30210)
  1457. [92101.505847] CPU2: Package temperature above threshold, cpu clock throttled (total events = 30210)
  1458. [92101.505850] CPU0: Package temperature above threshold, cpu clock throttled (total events = 30210)
  1459. [92101.506844] CPU0: Core temperature/speed normal
  1460. [92101.506845] CPU2: Core temperature/speed normal
  1461. [92101.506846] CPU3: Package temperature/speed normal
  1462. [92101.506846] CPU1: Package temperature/speed normal
  1463. [92101.506847] CPU2: Package temperature/speed normal
  1464. [92101.506848] CPU0: Package temperature/speed normal
  1465. [92596.301845] CPU2: Core temperature above threshold, cpu clock throttled (total events = 21349)
  1466. [92596.301846] CPU0: Core temperature above threshold, cpu clock throttled (total events = 21349)
  1467. [92596.301848] CPU1: Package temperature above threshold, cpu clock throttled (total events = 30365)
  1468. [92596.301849] CPU3: Package temperature above threshold, cpu clock throttled (total events = 30365)
  1469. [92596.301852] CPU2: Package temperature above threshold, cpu clock throttled (total events = 30365)
  1470. [92596.301857] CPU0: Package temperature above threshold, cpu clock throttled (total events = 30365)
  1471. [92596.302861] CPU0: Core temperature/speed normal
  1472. [92596.302861] CPU2: Core temperature/speed normal
  1473. [92596.302862] CPU3: Package temperature/speed normal
  1474. [92596.302862] CPU1: Package temperature/speed normal
  1475. [92596.302863] CPU2: Package temperature/speed normal
  1476. [92596.302864] CPU0: Package temperature/speed normal
  1477. [96626.742924] CPU2: Core temperature above threshold, cpu clock throttled (total events = 22432)
  1478. [96626.742925] CPU0: Core temperature above threshold, cpu clock throttled (total events = 22431)
  1479. [96626.742927] CPU3: Package temperature above threshold, cpu clock throttled (total events = 31448)
  1480. [96626.742928] CPU1: Package temperature above threshold, cpu clock throttled (total events = 31448)
  1481. [96626.742929] CPU0: Package temperature above threshold, cpu clock throttled (total events = 31447)
  1482. [96626.742934] CPU2: Package temperature above threshold, cpu clock throttled (total events = 31448)
  1483. [96626.747836] CPU2: Core temperature/speed normal
  1484. [96626.747836] CPU0: Core temperature/speed normal
  1485. [96626.747837] CPU3: Package temperature/speed normal
  1486. [96626.747838] CPU1: Package temperature/speed normal
  1487. [96626.747838] CPU0: Package temperature/speed normal
  1488. [96626.747840] CPU2: Package temperature/speed normal
  1489. [98709.444832] CPU0: Core temperature above threshold, cpu clock throttled (total events = 22493)
  1490. [98709.444833] CPU2: Core temperature above threshold, cpu clock throttled (total events = 22494)
  1491. [98709.444834] CPU1: Package temperature above threshold, cpu clock throttled (total events = 31510)
  1492. [98709.444835] CPU3: Package temperature above threshold, cpu clock throttled (total events = 31510)
  1493. [98709.444837] CPU2: Package temperature above threshold, cpu clock throttled (total events = 31510)
  1494. [98709.444841] CPU0: Package temperature above threshold, cpu clock throttled (total events = 31509)
  1495. [98709.445844] CPU0: Core temperature/speed normal
  1496. [98709.445845] CPU2: Core temperature/speed normal
  1497. [98709.445846] CPU1: Package temperature/speed normal
  1498. [98709.445846] CPU3: Package temperature/speed normal
  1499. [98709.445847] CPU2: Package temperature/speed normal
  1500. [98709.445848] CPU0: Package temperature/speed normal
  1501. [99009.468933] CPU2: Core temperature/speed normal
  1502. [99009.468933] CPU0: Core temperature/speed normal
  1503. [99009.468935] CPU0: Package temperature/speed normal
  1504. [99009.468935] CPU2: Package temperature/speed normal
  1505. [99009.468968] CPU1: Package temperature/speed normal
  1506. [99009.468969] CPU3: Package temperature/speed normal
  1507. [99757.609846] CPU0: Core temperature above threshold, cpu clock throttled (total events = 32392)
  1508. [99757.609847] CPU2: Core temperature above threshold, cpu clock throttled (total events = 32393)
  1509. [99757.609848] CPU3: Package temperature above threshold, cpu clock throttled (total events = 41907)
  1510. [99757.609849] CPU1: Package temperature above threshold, cpu clock throttled (total events = 41907)
  1511. [99757.609851] CPU2: Package temperature above threshold, cpu clock throttled (total events = 41907)
  1512. [99757.609855] CPU0: Package temperature above threshold, cpu clock throttled (total events = 41906)
  1513. [99757.610852] CPU2: Core temperature/speed normal
  1514. [99757.610852] CPU0: Core temperature/speed normal
  1515. [99757.610853] CPU3: Package temperature/speed normal
  1516. [99757.610853] CPU1: Package temperature/speed normal
  1517. [99757.610854] CPU0: Package temperature/speed normal
  1518. [99757.610855] CPU2: Package temperature/speed normal
  1519. [100059.233878] CPU0: Core temperature above threshold, cpu clock throttled (total events = 39321)
  1520. [100059.233879] CPU2: Core temperature above threshold, cpu clock throttled (total events = 39322)
  1521. [100059.233881] CPU2: Package temperature above threshold, cpu clock throttled (total events = 49053)
  1522. [100059.233884] CPU0: Package temperature above threshold, cpu clock throttled (total events = 49052)
  1523. [100059.233907] CPU1: Package temperature above threshold, cpu clock throttled (total events = 49053)
  1524. [100059.233908] CPU3: Package temperature above threshold, cpu clock throttled (total events = 49053)
  1525. [100059.234830] CPU2: Core temperature/speed normal
  1526. [100059.234831] CPU0: Core temperature/speed normal
  1527. [100059.234831] CPU0: Package temperature/speed normal
  1528. [100059.234832] CPU2: Package temperature/speed normal
  1529. [100059.234863] CPU1: Package temperature/speed normal
  1530. [100059.234863] CPU3: Package temperature/speed normal
  1531. [101129.819696] usb 2-2: new SuperSpeed USB device number 7 using xhci_hcd
  1532. [101129.845417] scsi host4: uas
  1533. [101129.847311] scsi 4:0:0:0: Direct-Access Seagate BUP BK 0304 PQ: 0 ANSI: 6
  1534. [101129.848782] sd 4:0:0:0: Attached scsi generic sg4 type 0
  1535. [101129.849132] sd 4:0:0:0: [sdd] Spinning up disk...
  1536. [101130.853011] .
  1537. [101131.866288] .
  1538. [101132.879383] .
  1539. [101133.892915] .
  1540. [101134.906330] .
  1541. [101135.919587] .
  1542. [101136.932686] .
  1543. [101136.933056] ready
  1544. [101136.933568] sd 4:0:0:0: [sdd] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
  1545. [101136.933575] sd 4:0:0:0: [sdd] 2048-byte physical blocks
  1546. [101137.487127] sd 4:0:0:0: [sdd] Write Protect is off
  1547. [101137.487138] sd 4:0:0:0: [sdd] Mode Sense: 4f 00 00 00
  1548. [101137.487369] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  1549. [101137.656495] sdd: sdd1
  1550. [101137.657437] sd 4:0:0:0: [sdd] Attached SCSI disk
  1551. [101143.462069] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
  1552. [101281.208280] sd 3:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
  1553. [101281.208294] sd 3:0:0:0: [sdc] tag#0 Sense Key : 0x2 [current]
  1554. [101281.208304] sd 3:0:0:0: [sdc] tag#0 ASC=0x3a ASCQ=0x0
  1555. [101281.208313] sd 3:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 07 6f 4e 00 00 00 f8 00
  1556. [101281.208320] print_req_error: I/O error, dev sdc, sector 124734976
  1557. [101281.212484] sd 3:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
  1558. [101281.212520] sd 3:0:0:0: [sdc] tag#0 Sense Key : 0x2 [current]
  1559. [101281.212530] sd 3:0:0:0: [sdc] tag#0 ASC=0x3a ASCQ=0x0
  1560. [101281.212540] sd 3:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 07 6f 4f 00 00 00 80 00
  1561. [101281.212548] print_req_error: I/O error, dev sdc, sector 124735232
  1562. [101281.213641] sd 3:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
  1563. [101281.213651] sd 3:0:0:0: [sdc] tag#0 Sense Key : 0x2 [current]
  1564. [101281.213658] sd 3:0:0:0: [sdc] tag#0 ASC=0x3a ASCQ=0x0
  1565. [101281.213667] sd 3:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 07 6f 4f 88 00 00 68 00
  1566. [101281.213672] print_req_error: I/O error, dev sdc, sector 124735368
  1567. [101281.215393] sd 3:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
  1568. [101281.215403] sd 3:0:0:0: [sdc] tag#0 Sense Key : 0x2 [current]
  1569. [101281.215412] sd 3:0:0:0: [sdc] tag#0 ASC=0x3a ASCQ=0x0
  1570. [101281.215421] sd 3:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 07 6f 4e 00 00 00 08 00
  1571. [101281.215428] print_req_error: I/O error, dev sdc, sector 124734976
  1572. [101281.215443] Buffer I/O error on dev sdc1, logical block 15587776, async page read
  1573. [101291.782438] xhci_hcd 0000:00:14.0: Cannot set link state.
  1574. [101291.782454] usb usb2-port4: cannot disable (err = -32)
  1575. [101291.782470] usb 2-4: USB disconnect, device number 6
  1576. [101294.882317] usb 2-2: USB disconnect, device number 7
  1577. [101294.884665] sd 4:0:0:0: [sdd] Synchronizing SCSI cache
  1578. [101295.085627] sd 4:0:0:0: [sdd] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=0x00
  1579. [101441.802060] xhci_hcd 0000:00:14.0: Cannot set link state.
  1580. [101441.802064] usb usb2-port1: cannot disable (err = -32)
  1581. [101441.802068] usb 2-1: USB disconnect, device number 5
  1582. [101550.739418] wlp1s0: deauthenticating from 70:3a:cb:29:33:a3 by local choice (Reason: 3=DEAUTH_LEAVING)
  1583. [101550.747443] wlp1s0: failed to remove key (2, ff:ff:ff:ff:ff:ff) from hardware (-22)
  1584. [101550.756640] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1585. [101551.355190] PM: suspend entry (deep)
  1586. [101551.355192] PM: Syncing filesystems ... done.
  1587. [101551.393415] Freezing user space processes ... (elapsed 0.002 seconds) done.
  1588. [101551.395647] OOM killer disabled.
  1589. [101551.395647] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
  1590. [101551.397090] Suspending console(s) (use no_console_suspend to debug)
  1591. [101551.397679] sd 1:0:0:0: [sda] Synchronizing SCSI cache
  1592. [101551.397724] sd 1:0:0:0: [sda] Stopping disk
  1593. [101551.722798] ACPI: Preparing to enter system sleep state S3
  1594. [101551.801914] ACPI: EC: event blocked
  1595. [101551.801916] ACPI: EC: EC stopped
  1596. [101551.801917] PM: Saving platform NVS memory
  1597. [101551.802077] Disabling non-boot CPUs ...
  1598. [101551.830116] smpboot: CPU 1 is now offline
  1599. [101551.851120] smpboot: CPU 2 is now offline
  1600. [101551.879952] smpboot: CPU 3 is now offline
  1601. [101551.883631] ACPI: Low-level resume complete
  1602. [101551.883741] ACPI: EC: EC started
  1603. [101551.883741] PM: Restoring platform NVS memory
  1604. [101551.885910] Enabling non-boot CPUs ...
  1605. [101551.885947] x86: Booting SMP configuration:
  1606. [101551.885948] smpboot: Booting Node 0 Processor 1 APIC 0x2
  1607. [101551.887852] cache: parent cpu1 should not be sleeping
  1608. [101551.888056] CPU1 is up
  1609. [101551.888074] smpboot: Booting Node 0 Processor 2 APIC 0x1
  1610. [101551.889828] cache: parent cpu2 should not be sleeping
  1611. [101551.890018] CPU2 is up
  1612. [101551.890041] smpboot: Booting Node 0 Processor 3 APIC 0x3
  1613. [101551.891585] cache: parent cpu3 should not be sleeping
  1614. [101551.891773] CPU3 is up
  1615. [101551.895479] ACPI: Waking up from system sleep state S3
  1616. [101552.128813] ACPI: EC: event unblocked
  1617. [101552.129350] sd 1:0:0:0: [sda] Starting disk
  1618. [101552.366646] OOM killer enabled.
  1619. [101552.366647] Restarting tasks ...
  1620. [101552.368441] [drm] RC6 on
  1621. [101552.385851] done.
  1622. [101552.426142] thermal thermal_zone7: failed to read out thermal zone (-61)
  1623. [101552.444008] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1624. [101552.447344] ata2.00: configured for UDMA/133
  1625. [101552.909386] PM: suspend exit
  1626. [101553.293440] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  1627. [101553.293748] enp2s0: 0xffffbfe3c10ef000, 98:83:89:6c:49:7a, IRQ 125
  1628. [101553.358605] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
  1629. [101553.359643] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1630. [101553.591514] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1631. [101553.839496] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1632. [101553.921410] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1633. [101557.329211] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
  1634. [101559.289169] wlp1s0: authenticate with 70:3a:cb:29:33:a3
  1635. [101559.296889] wlp1s0: send auth to 70:3a:cb:29:33:a3 (try 1/3)
  1636. [101559.304214] wlp1s0: authenticated
  1637. [101559.305831] wlp1s0: associate with 70:3a:cb:29:33:a3 (try 1/3)
  1638. [101559.308854] wlp1s0: RX AssocResp from 70:3a:cb:29:33:a3 (capab=0x11 status=0 aid=3)
  1639. [101559.310593] wlp1s0: associated
  1640. [101559.310673] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
  1641. [111802.971101] i915 0000:00:02.0: Resetting rcs0 after gpu hang
  1642. [111811.077751] i915 0000:00:02.0: Resetting rcs0 after gpu hang
  1643. [111820.037723] i915 0000:00:02.0: Resetting rcs0 after gpu hang
  1644. [111828.144393] i915 0000:00:02.0: Resetting rcs0 after gpu hang
  1645. [111836.037659] i915 0000:00:02.0: Resetting rcs0 after gpu hang
  1646. [111836.343843] ksmserver[17057]: segfault at 151f8f181 ip 00007f9db3f23096 sp 00007ffe86fbe818 error 4 in libKF5GlobalAccel.so.5.40.0[7f9db3f11000+23000]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement