Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-52-generic] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: HGST
- Product: HUH721010AL4200
- Revision: A9G0
- Compliance: SPC-4
- User Capacity: 10,000,831,348,736 bytes [10.0 TB]
- Logical block size: 4096 bytes
- LU is fully provisioned
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Logical Unit id: 0x5000cca26c2de230
- Serial number: 1DGU786Z
- Device type: disk
- Transport protocol: SAS (SPL-3)
- Local Time is: Wed Jul 6 21:43:31 2022 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- Temperature Warning: Enabled
- Read Cache is: Enabled
- Writeback Cache is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Health Status: OK
- Grown defects during certification <not available>
- Total blocks reassigned during format <not available>
- Total new blocks reassigned <not available>
- Power on minutes since format <not available>
- Current Drive Temperature: 38 C
- Drive Trip Temperature: 85 C
- Manufactured in week 09 of year 2018
- Specified cycle count over device lifetime: 50000
- Accumulated start-stop cycles: 23
- Specified load-unload count over device lifetime: 600000
- Accumulated load-unload cycles: 1322
- Elements in grown defect list: 0
- Vendor (Seagate Cache) information
- Blocks sent to initiator = 12236085438447616
- Error counter log:
- Errors Corrected by Total Correction Gigabytes Total
- ECC rereads/ errors algorithm processed uncorrected
- fast | delayed rewrites corrected invocations [10^9 bytes] errors
- read: 0 1 0 1 3091830 42183.751 0
- write: 0 0 0 0 511792 242980.352 0
- verify: 0 0 0 0 60127 0.025 0
- Non-medium error count: 0
- SMART Self-test log
- Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
- Description number (hours)
- # 1 Background short Completed - 29479 - [- - -]
- Long (extended) Self-test duration: 65535 seconds [1092.2 minutes]
- Background scan results log
- Status: no scans active
- Accumulated power on time, hours:minutes 31545:13 [1892713 minutes]
- Number of background scans performed: 155, scan progress: 0.00%
- Number of background medium scans performed: 155
- Protocol Specific port log page for SAS SSP
- relative target port id = 1
- generation code = 2
- number of phys = 1
- phy identifier = 0
- attached device type: expander device
- attached reason: SMP phy control function
- reason: unknown
- negotiated logical link rate: phy enabled; 12 Gbps
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=1
- SAS address = 0x5000cca26c2de231
- attached SAS address = 0x500304802094cf7f
- attached phy identifier = 37
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- relative target port id = 2
- generation code = 2
- number of phys = 1
- phy identifier = 1
- attached device type: no device attached
- attached reason: unknown
- reason: power on
- negotiated logical link rate: phy enabled; unknown
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=0
- SAS address = 0x5000cca26c2de232
- attached SAS address = 0x0
- attached phy identifier = 0
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-52-generic] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: HGST
- Product: HUH721010AL4200
- Revision: A9G0
- Compliance: SPC-4
- User Capacity: 10,000,831,348,736 bytes [10.0 TB]
- Logical block size: 4096 bytes
- LU is fully provisioned
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Logical Unit id: 0x5000cca26c2e0b44
- Serial number: 1DGUA00Z
- Device type: disk
- Transport protocol: SAS (SPL-3)
- Local Time is: Wed Jul 6 21:43:32 2022 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- Temperature Warning: Enabled
- Read Cache is: Enabled
- Writeback Cache is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Health Status: OK
- Grown defects during certification <not available>
- Total blocks reassigned during format <not available>
- Total new blocks reassigned <not available>
- Power on minutes since format <not available>
- Current Drive Temperature: 34 C
- Drive Trip Temperature: 85 C
- Manufactured in week 09 of year 2018
- Specified cycle count over device lifetime: 50000
- Accumulated start-stop cycles: 23
- Specified load-unload count over device lifetime: 600000
- Accumulated load-unload cycles: 1315
- Elements in grown defect list: 0
- Vendor (Seagate Cache) information
- Blocks sent to initiator = 12159576803639296
- Error counter log:
- Errors Corrected by Total Correction Gigabytes Total
- ECC rereads/ errors algorithm processed uncorrected
- fast | delayed rewrites corrected invocations [10^9 bytes] errors
- read: 0 0 0 0 3058694 40777.087 0
- write: 0 0 0 0 477933 244674.282 0
- verify: 0 0 0 0 49275 0.014 0
- Non-medium error count: 0
- SMART Self-test log
- Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
- Description number (hours)
- # 1 Background short Completed - 29478 - [- - -]
- Long (extended) Self-test duration: 65535 seconds [1092.2 minutes]
- Background scan results log
- Status: no scans active
- Accumulated power on time, hours:minutes 31549:30 [1892970 minutes]
- Number of background scans performed: 158, scan progress: 0.00%
- Number of background medium scans performed: 158
- Protocol Specific port log page for SAS SSP
- relative target port id = 1
- generation code = 2
- number of phys = 1
- phy identifier = 0
- attached device type: expander device
- attached reason: SMP phy control function
- reason: unknown
- negotiated logical link rate: phy enabled; 12 Gbps
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=1
- SAS address = 0x5000cca26c2e0b45
- attached SAS address = 0x500304802094cf7f
- attached phy identifier = 39
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- relative target port id = 2
- generation code = 2
- number of phys = 1
- phy identifier = 1
- attached device type: no device attached
- attached reason: unknown
- reason: power on
- negotiated logical link rate: phy enabled; unknown
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=0
- SAS address = 0x5000cca26c2e0b46
- attached SAS address = 0x0
- attached phy identifier = 0
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-52-generic] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: HGST
- Product: HUH721010AL4200
- Revision: A9G0
- Compliance: SPC-4
- User Capacity: 10,000,831,348,736 bytes [10.0 TB]
- Logical block size: 4096 bytes
- LU is fully provisioned
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Logical Unit id: 0x5000cca26a618978
- Serial number: 2THRMWWD
- Device type: disk
- Transport protocol: SAS (SPL-3)
- Local Time is: Wed Jul 6 21:43:32 2022 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- Temperature Warning: Enabled
- Read Cache is: Enabled
- Writeback Cache is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Health Status: OK
- Grown defects during certification <not available>
- Total blocks reassigned during format <not available>
- Total new blocks reassigned <not available>
- Power on minutes since format <not available>
- Current Drive Temperature: 40 C
- Drive Trip Temperature: 85 C
- Manufactured in week 09 of year 2018
- Specified cycle count over device lifetime: 50000
- Accumulated start-stop cycles: 46
- Specified load-unload count over device lifetime: 600000
- Accumulated load-unload cycles: 1342
- Elements in grown defect list: 0
- Vendor (Seagate Cache) information
- Blocks sent to initiator = 12230441062891520
- Error counter log:
- Errors Corrected by Total Correction Gigabytes Total
- ECC rereads/ errors algorithm processed uncorrected
- fast | delayed rewrites corrected invocations [10^9 bytes] errors
- read: 0 5 0 5 2965807 41787.254 0
- write: 0 0 0 0 498998 246537.978 0
- verify: 0 0 0 0 41423 0.121 0
- Non-medium error count: 0
- SMART Self-test log
- Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
- Description number (hours)
- # 1 Background long Completed - 29671 - [- - -]
- # 2 Background short Completed - 29654 - [- - -]
- Long (extended) Self-test duration: 65535 seconds [1092.2 minutes]
- Background scan results log
- Status: no scans active
- Accumulated power on time, hours:minutes 31752:17 [1905137 minutes]
- Number of background scans performed: 158, scan progress: 0.00%
- Number of background medium scans performed: 158
- Protocol Specific port log page for SAS SSP
- relative target port id = 1
- generation code = 2
- number of phys = 1
- phy identifier = 0
- attached device type: expander device
- attached reason: SMP phy control function
- reason: unknown
- negotiated logical link rate: phy enabled; 12 Gbps
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=1
- SAS address = 0x5000cca26a618979
- attached SAS address = 0x500304802094cf7f
- attached phy identifier = 8
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- relative target port id = 2
- generation code = 2
- number of phys = 1
- phy identifier = 1
- attached device type: no device attached
- attached reason: unknown
- reason: power on
- negotiated logical link rate: phy enabled; unknown
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=0
- SAS address = 0x5000cca26a61897a
- attached SAS address = 0x0
- attached phy identifier = 0
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-52-generic] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: HGST
- Product: HUH721010AL4200
- Revision: A9G0
- Compliance: SPC-4
- User Capacity: 10,000,831,348,736 bytes [10.0 TB]
- Logical block size: 4096 bytes
- LU is fully provisioned
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Logical Unit id: 0x5000cca26a644d80
- Serial number: 2THT51MD
- Device type: disk
- Transport protocol: SAS (SPL-3)
- Local Time is: Wed Jul 6 21:43:33 2022 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- Temperature Warning: Enabled
- Read Cache is: Enabled
- Writeback Cache is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Health Status: OK
- Grown defects during certification <not available>
- Total blocks reassigned during format <not available>
- Total new blocks reassigned <not available>
- Power on minutes since format <not available>
- Current Drive Temperature: 39 C
- Drive Trip Temperature: 85 C
- Manufactured in week 09 of year 2018
- Specified cycle count over device lifetime: 50000
- Accumulated start-stop cycles: 23
- Specified load-unload count over device lifetime: 600000
- Accumulated load-unload cycles: 1307
- Elements in grown defect list: 0
- Vendor (Seagate Cache) information
- Blocks sent to initiator = 12236826840399872
- Error counter log:
- Errors Corrected by Total Correction Gigabytes Total
- ECC rereads/ errors algorithm processed uncorrected
- fast | delayed rewrites corrected invocations [10^9 bytes] errors
- read: 0 3 0 3 3052868 41515.484 0
- write: 0 0 0 0 408238 244683.872 0
- verify: 0 0 0 0 41927 0.020 0
- Non-medium error count: 0
- SMART Self-test log
- Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
- Description number (hours)
- # 1 Background short Completed - 29493 - [- - -]
- Long (extended) Self-test duration: 65535 seconds [1092.2 minutes]
- Background scan results log
- Status: no scans active
- Accumulated power on time, hours:minutes 31544:38 [1892678 minutes]
- Number of background scans performed: 157, scan progress: 0.00%
- Number of background medium scans performed: 157
- Protocol Specific port log page for SAS SSP
- relative target port id = 1
- generation code = 2
- number of phys = 1
- phy identifier = 0
- attached device type: expander device
- attached reason: SMP phy control function
- reason: unknown
- negotiated logical link rate: phy enabled; 12 Gbps
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=1
- SAS address = 0x5000cca26a644d81
- attached SAS address = 0x500304802094cf7f
- attached phy identifier = 35
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- relative target port id = 2
- generation code = 2
- number of phys = 1
- phy identifier = 1
- attached device type: no device attached
- attached reason: unknown
- reason: power on
- negotiated logical link rate: phy enabled; unknown
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=0
- SAS address = 0x5000cca26a644d82
- attached SAS address = 0x0
- attached phy identifier = 0
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-52-generic] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: HGST
- Product: HUH721010AL4200
- Revision: A9G0
- Compliance: SPC-4
- User Capacity: 10,000,831,348,736 bytes [10.0 TB]
- Logical block size: 4096 bytes
- LU is fully provisioned
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Logical Unit id: 0x5000cca26a657ebc
- Serial number: 2THTUBTD
- Device type: disk
- Transport protocol: SAS (SPL-3)
- Local Time is: Wed Jul 6 21:43:34 2022 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- Temperature Warning: Enabled
- Read Cache is: Enabled
- Writeback Cache is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Health Status: OK
- Grown defects during certification <not available>
- Total blocks reassigned during format <not available>
- Total new blocks reassigned <not available>
- Power on minutes since format <not available>
- Current Drive Temperature: 37 C
- Drive Trip Temperature: 85 C
- Manufactured in week 09 of year 2018
- Specified cycle count over device lifetime: 50000
- Accumulated start-stop cycles: 46
- Specified load-unload count over device lifetime: 600000
- Accumulated load-unload cycles: 1347
- Elements in grown defect list: 0
- Vendor (Seagate Cache) information
- Blocks sent to initiator = 12128174083145728
- Error counter log:
- Errors Corrected by Total Correction Gigabytes Total
- ECC rereads/ errors algorithm processed uncorrected
- fast | delayed rewrites corrected invocations [10^9 bytes] errors
- read: 0 1053 0 1053 3214867 41225.096 0
- write: 0 0 0 0 614531 242434.310 0
- verify: 0 0 0 0 53513 0.123 0
- Non-medium error count: 0
- SMART Self-test log
- Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
- Description number (hours)
- # 1 Background short Completed - 29656 - [- - -]
- Long (extended) Self-test duration: 62036 seconds [1033.9 minutes]
- Background scan results log
- Status: no scans active
- Accumulated power on time, hours:minutes 31721:27 [1903287 minutes]
- Number of background scans performed: 159, scan progress: 0.00%
- Number of background medium scans performed: 159
- Protocol Specific port log page for SAS SSP
- relative target port id = 1
- generation code = 2
- number of phys = 1
- phy identifier = 0
- attached device type: expander device
- attached reason: SMP phy control function
- reason: unknown
- negotiated logical link rate: phy enabled; 12 Gbps
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=1
- SAS address = 0x5000cca26a657ebd
- attached SAS address = 0x500304802094cf7f
- attached phy identifier = 38
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- relative target port id = 2
- generation code = 2
- number of phys = 1
- phy identifier = 1
- attached device type: no device attached
- attached reason: unknown
- reason: power on
- negotiated logical link rate: phy enabled; unknown
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=0
- SAS address = 0x5000cca26a657ebe
- attached SAS address = 0x0
- attached phy identifier = 0
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-52-generic] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: HGST
- Product: HUH721010AL4200
- Revision: A9G0
- Compliance: SPC-4
- User Capacity: 10,000,831,348,736 bytes [10.0 TB]
- Logical block size: 4096 bytes
- LU is fully provisioned
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Logical Unit id: 0x5000cca26a65b540
- Serial number: 2THTY0AD
- Device type: disk
- Transport protocol: SAS (SPL-3)
- Local Time is: Wed Jul 6 21:43:34 2022 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- Temperature Warning: Enabled
- Read Cache is: Enabled
- Writeback Cache is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Health Status: OK
- Grown defects during certification <not available>
- Total blocks reassigned during format <not available>
- Total new blocks reassigned <not available>
- Power on minutes since format <not available>
- Current Drive Temperature: 39 C
- Drive Trip Temperature: 85 C
- Manufactured in week 09 of year 2018
- Specified cycle count over device lifetime: 50000
- Accumulated start-stop cycles: 48
- Specified load-unload count over device lifetime: 600000
- Accumulated load-unload cycles: 1353
- Elements in grown defect list: 0
- Vendor (Seagate Cache) information
- Blocks sent to initiator = 11698131657818112
- Error counter log:
- Errors Corrected by Total Correction Gigabytes Total
- ECC rereads/ errors algorithm processed uncorrected
- fast | delayed rewrites corrected invocations [10^9 bytes] errors
- read: 0 4 0 4 3080722 47717.564 0
- write: 0 0 0 0 537260 242652.152 0
- verify: 0 0 0 0 25318 0.048 0
- Non-medium error count: 0
- SMART Self-test log
- Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
- Description number (hours)
- # 1 Background short Completed - 29669 - [- - -]
- Long (extended) Self-test duration: 65535 seconds [1092.2 minutes]
- Background scan results log
- Status: no scans active
- Accumulated power on time, hours:minutes 31720:02 [1903202 minutes]
- Number of background scans performed: 158, scan progress: 0.00%
- Number of background medium scans performed: 158
- Protocol Specific port log page for SAS SSP
- relative target port id = 1
- generation code = 2
- number of phys = 1
- phy identifier = 0
- attached device type: expander device
- attached reason: SMP phy control function
- reason: unknown
- negotiated logical link rate: phy enabled; 12 Gbps
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=1
- SAS address = 0x5000cca26a65b541
- attached SAS address = 0x500304802094cf7f
- attached phy identifier = 34
- Invalid DWORD count = 47365
- Running disparity error count = 46645
- Loss of DWORD synchronization = 165
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 47365
- Running disparity error count: 46645
- Loss of dword synchronization count: 165
- Phy reset problem count: 0
- relative target port id = 2
- generation code = 2
- number of phys = 1
- phy identifier = 1
- attached device type: no device attached
- attached reason: unknown
- reason: power on
- negotiated logical link rate: phy enabled; unknown
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=0
- SAS address = 0x5000cca26a65b542
- attached SAS address = 0x0
- attached phy identifier = 0
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-52-generic] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: HGST
- Product: HUH721010AL4200
- Revision: A9G0
- Compliance: SPC-4
- User Capacity: 10,000,831,348,736 bytes [10.0 TB]
- Logical block size: 4096 bytes
- LU is fully provisioned
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Logical Unit id: 0x5000cca26a65f590
- Serial number: 2THU293D
- Device type: disk
- Transport protocol: SAS (SPL-3)
- Local Time is: Wed Jul 6 21:43:35 2022 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- Temperature Warning: Enabled
- Read Cache is: Enabled
- Writeback Cache is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Health Status: OK
- Grown defects during certification <not available>
- Total blocks reassigned during format <not available>
- Total new blocks reassigned <not available>
- Power on minutes since format <not available>
- Current Drive Temperature: 38 C
- Drive Trip Temperature: 85 C
- Manufactured in week 09 of year 2018
- Specified cycle count over device lifetime: 50000
- Accumulated start-stop cycles: 46
- Specified load-unload count over device lifetime: 600000
- Accumulated load-unload cycles: 1339
- Elements in grown defect list: 0
- Vendor (Seagate Cache) information
- Blocks sent to initiator = 11937298824298496
- Error counter log:
- Errors Corrected by Total Correction Gigabytes Total
- ECC rereads/ errors algorithm processed uncorrected
- fast | delayed rewrites corrected invocations [10^9 bytes] errors
- read: 0 32 0 32 3062646 42188.253 0
- write: 0 0 0 0 374720 243539.599 0
- verify: 0 0 0 0 25978 0.107 0
- Non-medium error count: 0
- SMART Self-test log
- Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
- Description number (hours)
- # 1 Background short Completed - 29669 - [- - -]
- Long (extended) Self-test duration: 65535 seconds [1092.2 minutes]
- Background scan results log
- Status: no scans active
- Accumulated power on time, hours:minutes 31720:06 [1903206 minutes]
- Number of background scans performed: 160, scan progress: 0.00%
- Number of background medium scans performed: 160
- Protocol Specific port log page for SAS SSP
- relative target port id = 1
- generation code = 2
- number of phys = 1
- phy identifier = 0
- attached device type: expander device
- attached reason: SMP phy control function
- reason: unknown
- negotiated logical link rate: phy enabled; 12 Gbps
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=1
- SAS address = 0x5000cca26a65f591
- attached SAS address = 0x500304802094cf7f
- attached phy identifier = 36
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- relative target port id = 2
- generation code = 2
- number of phys = 1
- phy identifier = 1
- attached device type: no device attached
- attached reason: unknown
- reason: power on
- negotiated logical link rate: phy enabled; unknown
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=0
- SAS address = 0x5000cca26a65f592
- attached SAS address = 0x0
- attached phy identifier = 0
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.13.0-52-generic] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Vendor: HGST
- Product: HUH721010AL4200
- Revision: A9G0
- Compliance: SPC-4
- User Capacity: 10,000,831,348,736 bytes [10.0 TB]
- Logical block size: 4096 bytes
- LU is fully provisioned
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Logical Unit id: 0x5000cca26a664ba4
- Serial number: 2THU80UD
- Device type: disk
- Transport protocol: SAS (SPL-3)
- Local Time is: Wed Jul 6 21:43:36 2022 EDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- Temperature Warning: Enabled
- Read Cache is: Enabled
- Writeback Cache is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Health Status: OK
- Grown defects during certification <not available>
- Total blocks reassigned during format <not available>
- Total new blocks reassigned <not available>
- Power on minutes since format <not available>
- Current Drive Temperature: 39 C
- Drive Trip Temperature: 85 C
- Manufactured in week 09 of year 2018
- Specified cycle count over device lifetime: 50000
- Accumulated start-stop cycles: 48
- Specified load-unload count over device lifetime: 600000
- Accumulated load-unload cycles: 2900
- Elements in grown defect list: 0
- Vendor (Seagate Cache) information
- Blocks sent to initiator = 11621815793221632
- Error counter log:
- Errors Corrected by Total Correction Gigabytes Total
- ECC rereads/ errors algorithm processed uncorrected
- fast | delayed rewrites corrected invocations [10^9 bytes] errors
- read: 0 525 0 525 3138657 47798.564 0
- write: 0 0 0 0 406648 243269.052 0
- verify: 0 0 0 0 24205 0.016 0
- Non-medium error count: 0
- SMART Self-test log
- Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
- Description number (hours)
- # 1 Background short Completed - 29653 - [- - -]
- Long (extended) Self-test duration: 61240 seconds [1020.7 minutes]
- Background scan results log
- Status: no scans active
- Accumulated power on time, hours:minutes 31694:26 [1901666 minutes]
- Number of background scans performed: 159, scan progress: 0.00%
- Number of background medium scans performed: 159
- Protocol Specific port log page for SAS SSP
- relative target port id = 1
- generation code = 2
- number of phys = 1
- phy identifier = 0
- attached device type: expander device
- attached reason: SMP phy control function
- reason: unknown
- negotiated logical link rate: phy enabled; 12 Gbps
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=1
- SAS address = 0x5000cca26a664ba5
- attached SAS address = 0x500304802094cf7f
- attached phy identifier = 9
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
- relative target port id = 2
- generation code = 2
- number of phys = 1
- phy identifier = 1
- attached device type: no device attached
- attached reason: unknown
- reason: power on
- negotiated logical link rate: phy enabled; unknown
- attached initiator port: ssp=0 stp=0 smp=0
- attached target port: ssp=0 stp=0 smp=0
- SAS address = 0x5000cca26a664ba6
- attached SAS address = 0x0
- attached phy identifier = 0
- Invalid DWORD count = 0
- Running disparity error count = 0
- Loss of DWORD synchronization = 0
- Phy reset problem = 0
- Phy event descriptors:
- Invalid word count: 0
- Running disparity error count: 0
- Loss of dword synchronization count: 0
- Phy reset problem count: 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement