Advertisement
Guest User

Untitled

a guest
Apr 5th, 2024
17
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.94 KB | None | 0 0
  1. U-Boot TPL 2023.01-armbian (Feb 09 2024 - 18:58:54)
  2. lpddr4_set_rate: change freq to 400MHz 0, 1
  3. Channel 0: LPDDR4, 400MHz
  4. BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
  5. Channel 1: LPDDR4, 400MHz
  6. BW=32 Col=10 Bk=8 CS0 Row=16/15 CS=1 Die BW=16 Size=2048MB
  7. 256B stride
  8. lpddr4_set_rate: change freq to 800MHz 1, 0
  9. Trying to boot from BOOTROM
  10. Returning to boot ROM...
  11.  
  12. U-Boot SPL 2023.01-armbian (Feb 09 2024 - 18:58:54 +0000)
  13. Trying to boot from MMC2
  14. NOTICE: BL31: lts-v2.8.8(release):armbian
  15. NOTICE: BL31: Built : 18:58:36, Feb 9 2024
  16. INFO: GICv3 with legacy support detected.
  17. INFO: ARM GICv3 driver initialized in EL3
  18. INFO: Maximum SPI INTID supported: 287
  19. INFO: plat_rockchip_pmu_init(1624): pd status 3e
  20. INFO: BL31: Initializing runtime services
  21. INFO: BL31: Preparing for EL3 exit to normal world
  22. INFO: Entry point address = 0x200000
  23. INFO: SPSR = 0x3c9
  24. ns16550_serial serial@ff1a0000: pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19
  25.  
  26.  
  27. U-Boot 2023.01-armbian (Feb 09 2024 - 18:58:54 +0000)
  28.  
  29. SoC: Rockchip rk3399
  30. Reset cause: POR
  31. Model: Pine64 RockPro64 v2.1
  32. DRAM: 3.9 GiB
  33. PMIC: RK808
  34. Core: 305 devices, 33 uclasses, devicetree: separate
  35. MMC: mmc@fe310000: 3, mmc@fe320000: 1, mmc@fe330000: 0
  36. Loading Environment from SPIFlash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
  37. *** Warning - bad CRC, using default environment
  38.  
  39. In: serial
  40. Out: serial
  41. Err: serial
  42. Model: Pine64 RockPro64 v2.1
  43. Net: eth0: ethernet@fe300000
  44. Hit any key to stop autoboot: 0
  45. switch to partitions #0, OK
  46. mmc1 is current device
  47. Scanning mmc 1:1...
  48. Found U-Boot script /boot/boot.scr
  49. 3548 bytes read in 6 ms (577.1 KiB/s)
  50. ## Executing script at 00500000
  51. Boot script loaded from mmc 1:1
  52. 166 bytes read in 5 ms (32.2 KiB/s)
  53. 21875121 bytes read in 931 ms (22.4 MiB/s)
  54. 31203840 bytes read in 1322 ms (22.5 MiB/s)
  55. 84586 bytes read in 15 ms (5.4 MiB/s)
  56. Working FDT set to 1f00000
  57. 2825 bytes read in 10 ms (275.4 KiB/s)
  58. Applying kernel provided DT fixup script (rockchip-fixup.scr)
  59. ## Executing script at 09000000
  60. Unknown command 'kaslrseed' - try 'help'
  61. Moving Image from 0x2080000 to 0x2200000, end=4060000
  62. ## Loading init Ramdisk from Legacy Image at 06000000 ...
  63. Image Name: uInitrd
  64. Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
  65. Data Size: 21875057 Bytes = 20.9 MiB
  66. Load Address: 00000000
  67. Entry Point: 00000000
  68. Verifying Checksum ... OK
  69. ## Flattened Device Tree blob at 01f00000
  70. Booting using the fdt blob at 0x1f00000
  71. Working FDT set to 1f00000
  72. Loading Ramdisk to efa25000, end f0f01971 ... OK
  73. Loading Device Tree to 00000000ef9a8000, end 00000000efa24fff ... OK
  74. Working FDT set to ef9a8000
  75.  
  76. Starting kernel ...
  77.  
  78.  
  79.  
  80.  
  81.  
  82.  
  83.  
  84.  
  85. done.
  86. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  87. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  88. done.
  89. Begin: Will now check root file system ... fsck from util-linux 2.38.1
  90. [/sbin/fsck.ext4 (1) -- /dev/nvme0n1p1] fsck.ext4 -a -C0 /dev/nvme0n1p1
  91. /dev/nvme0n1p1: recovering journal
  92. /dev/nvme0n1p1: clean, 3743916/61054976 files, 29424305/244190208 blocks
  93. done.
  94. done.
  95. Begin: Running /scripts/local-bottom ... done.
  96. Begin: Running /scripts/init-bottom ... done.
  97.  
  98. Welcome to Armbian 24.2.1 bookworm!
  99.  
  100. [ OK ] Created slice system-getty.slice - Slice /system/getty.
  101. [ OK ] Created slice system-modpr…lice - Slice /system/modprobe.
  102. [ OK ] Created slice system-seria… - Slice /system/serial-getty.
  103. [ OK ] Created slice system-syste… - Slice /system/systemd-fsck.
  104. [ OK ] Created slice user.slice - User and Session Slice.
  105. [ OK ] Started systemd-ask-passwo… Requests to Wall Directory Watch.
  106. [ OK ] Set up automount proc-sys-…rmats File System Automount Point.
  107. Expecting device dev-disk-…23e-5b80-42fa-bf94-feb45547855f...
  108. Expecting device dev-ttyS2.device - /dev/ttyS2...
  109. [ OK ] Reached target integrityse…Local Integrity Protected Volumes.
  110. [ OK ] Reached target slices.target - Slice Units.
  111. [ OK ] Reached target time-set.target - System Time Set.
  112. [ OK ] Reached target veritysetup… - Local Verity Protected Volumes.
  113. [ OK ] Listening on rpcbind.socke… RPCbind Server Activation Socket.
  114. [ OK ] Listening on syslog.socket - Syslog Socket.
  115. [ OK ] Listening on systemd-fsckd…sck to fsckd communication Socket.
  116. [ OK ] Listening on systemd-initc… initctl Compatibility Named Pipe.
  117. [ OK ] Listening on systemd-journ…socket - Journal Audit Socket.
  118. [ OK ] Listening on systemd-journ…t - Journal Socket (/dev/log).
  119. [ OK ] Listening on systemd-journald.socket - Journal Socket.
  120. [ OK ] Listening on systemd-udevd….socket - udev Control Socket.
  121. [ OK ] Listening on systemd-udevd…l.socket - udev Kernel Socket.
  122. Mounting dev-hugepages.mount - Huge Pages File System...
  123. Mounting dev-mqueue.mount…POSIX Message Queue File System...
  124. Mounting sys-kernel-debug.… - Kernel Debug File System...
  125. Mounting sys-kernel-tracin… - Kernel Trace File System...
  126. Starting fake-hwclock.serv…estore / save the current clock...
  127. Starting keyboard-setup.se…Set the console keyboard layout...
  128. Starting kmod-static-nodes…ate List of Static Device Nodes...
  129. Starting modprobe@configfs…m - Load Kernel Module configfs...
  130. Starting modprobe@dm_mod.s…[0m - Load Kernel Module dm_mod...
  131. Starting modprobe@drm.service - Load Kernel Module drm...
  132. Starting modprobe@efi_psto…- Load Kernel Module efi_pstore...
  133. Starting modprobe@fuse.ser…e - Load Kernel Module fuse...
  134. Starting modprobe@loop.ser…e - Load Kernel Module loop...
  135. Starting systemd-modules-l…rvice - Load Kernel Modules...
  136. Starting systemd-remount-f…nt Root and Kernel File Systems...
  137. Starting systemd-udev-trig…[0m - Coldplug All udev Devices...
  138. [ OK ] Mounted dev-hugepages.mount - Huge Pages File System.
  139. [ OK ] Mounted dev-mqueue.mount…- POSIX Message Queue File System.
  140. [ OK ] Mounted sys-kernel-debug.m…nt - Kernel Debug File System.
  141. [ OK ] Mounted sys-kernel-tracing…nt - Kernel Trace File System.
  142. [ OK ] Finished fake-hwclock.serv… Restore / save the current clock.
  143. [ OK ] Finished kmod-static-nodes…reate List of Static Device Nodes.
  144. [ OK ] Finished modprobe@configfs…[0m - Load Kernel Module configfs.
  145. [ OK ] Finished modprobe@dm_mod.s…e - Load Kernel Module dm_mod.
  146. [ OK ] Finished modprobe@drm.service - Load Kernel Module drm.
  147. [ OK ] Finished modprobe@efi_psto…m - Load Kernel Module efi_pstore.
  148. [ OK ] Finished modprobe@fuse.service - Load Kernel Module fuse.
  149. [ OK ] Finished modprobe@loop.service - Load Kernel Module loop.
  150. [ OK ] Finished systemd-modules-l…service - Load Kernel Modules.
  151. Mounting sys-fs-fuse-conne… - FUSE Control File System...
  152. Mounting sys-kernel-config…ernel Configuration File System...
  153. Starting systemd-sysctl.se…ce - Apply Kernel Variables...
  154. [ OK ] Mounted sys-fs-fuse-connec…nt - FUSE Control File System.
  155. [ OK ] Mounted sys-kernel-config.… Kernel Configuration File System.
  156. [ OK ] Finished systemd-remount-f…ount Root and Kernel File Systems.
  157. Activating swap swapfile.swap - /swapfile...
  158. Starting systemd-random-se…ice - Load/Save Random Seed...
  159. Starting systemd-sysusers.…rvice - Create System Users...
  160. [ OK ] Finished systemd-sysctl.service - Apply Kernel Variables.
  161. [ OK ] Activated swap swapfile.swap - /swapfile.
  162. [ OK ] Reached target swap.target - Swaps.
  163. [ OK ] Finished systemd-sysusers.service - Create System Users.
  164. Starting systemd-tmpfiles-…ate Static Device Nodes in /dev...
  165. [ OK ] Finished keyboard-setup.se…- Set the console keyboard layout.
  166. [ OK ] Finished systemd-tmpfiles-…reate Static Device Nodes in /dev.
  167. [ OK ] Reached target local-fs-pr…reparation for Local File Systems.
  168. Starting systemd-udevd.ser…ger for Device Events and Files...
  169. [ OK ] Started systemd-udevd.serv…nager for Device Events and Files.
  170. [ OK ] Finished systemd-udev-trig…e - Coldplug All udev Devices.
  171. Starting ifupdown-pre.serv…ynchronize boot up for ifupdown...
  172. Starting plymouth-start.se…[0m - Show Plymouth Boot Screen...
  173. [ OK ] Finished ifupdown-pre.serv… synchronize boot up for ifupdown.
  174. [ OK ] Found device dev-ttyS2.device - /dev/ttyS2.
  175. [ OK ] Started plymouth-start.ser…e - Show Plymouth Boot Screen.
  176. [ OK ] Started systemd-ask-passwo…uests to Plymouth Directory Watch.
  177. [ OK ] Reached target cryptsetup.…get - Local Encrypted Volumes.
  178. [ OK ] Reached target paths.target - Path Units.
  179. Mounting tmp.mount - /tmp...
  180. [ OK ] Mounted tmp.mount - /tmp.
  181. [ OK ] Found device dev-disk-by\x…8b23e-5b80-42fa-bf94-feb45547855f.
  182. Starting systemd-fsck@dev-…23e-5b80-42fa-bf94-feb45547855f...
  183. [ OK ] Started systemd-fsckd.serv…tem Check Daemon to report status.
  184. [ OK ] Finished systemd-random-se…rvice - Load/Save Random Seed.
  185. [ OK ] Finished systemd-fsck@dev-…8b23e-5b80-42fa-bf94-feb45547855f.
  186. Mounting media-mmcboot.mount - /media/mmcboot...
  187. [ OK ] Mounted media-mmcboot.mount - /media/mmcboot.
  188. [ OK ] Listening on systemd-rfkil…l Switch Status /dev/rfkill Watch.
  189. Mounting boot.mount - /boot...
  190. Starting systemd-rfkill.se…Load/Save RF Kill Switch Status...
  191. [ OK ] Mounted boot.mount - /boot.
  192. [ OK ] Reached target bluetooth.target - Bluetooth Support.
  193. [ OK ] Reached target local-fs.target - Local File Systems.
  194. Starting armbian-zram-conf…rvice - Armbian ZRAM config...
  195. Starting console-setup.ser…m - Set console font and keymap...
  196. Starting networking.service - Raise network interfaces...
  197. Starting plymouth-read-wri…mouth To Write Out Runtime Data...
  198. Starting systemd-binfmt.se…et Up Additional Binary Formats...
  199. [ OK ] Finished console-setup.ser…[0m - Set console font and keymap.
  200. [ OK ] Started systemd-rfkill.ser…- Load/Save RF Kill Switch Status.
  201. [ OK ] Finished plymouth-read-wri…lymouth To Write Out Runtime Data.
  202. Mounting proc-sys-fs-binfm…utable File Formats File System...
  203. Starting modprobe@dm_mod.s…[0m - Load Kernel Module dm_mod...
  204. Starting modprobe@efi_psto…- Load Kernel Module efi_pstore...
  205. Starting modprobe@loop.ser…e - Load Kernel Module loop...
  206. [ OK ] Finished modprobe@dm_mod.s…e - Load Kernel Module dm_mod.
  207. [ OK ] Mounted proc-sys-fs-binfmt…ecutable File Formats File System.
  208. [ OK ] Finished modprobe@efi_psto…m - Load Kernel Module efi_pstore.
  209. [ OK ] Finished modprobe@loop.service - Load Kernel Module loop.
  210. [ OK ] Finished systemd-binfmt.se… Set Up Additional Binary Formats.
  211. [ OK ] Finished networking.service - Raise network interfaces.
  212. [ OK ] Finished armbian-zram-conf…service - Armbian ZRAM config.
  213. Starting armbian-ramlog.se…rmbian memory supported logging...
  214. [ OK ] Finished armbian-ramlog.se… Armbian memory supported logging.
  215. Starting systemd-journald.service - Journal Service...
  216. [ OK ] Started systemd-journald.service - Journal Service.
  217. Starting systemd-journal-f…h Journal to Persistent Storage...
  218. [ OK ] Finished systemd-journal-f…ush Journal to Persistent Storage.
  219. Starting systemd-tmpfiles-… Volatile Files and Directories...
  220. [ OK ] Finished systemd-tmpfiles-…te Volatile Files and Directories.
  221. Mounting run-rpc_pipefs.mount - RPC Pipe File System...
  222. [ OK ] Started haveged.service…mon based on the HAVEGE algorithm.
  223. Starting rpcbind.service - RPC bind portmap service...
  224. Starting systemd-resolved.…e - Network Name Resolution...
  225. Starting systemd-update-ut…rd System Boot/Shutdown in UTMP...
  226. [ OK ] Started rpcbind.service - RPC bind portmap service.
  227. [ OK ] Reached target rpcbind.target - RPC Port Mapper.
  228. [ OK ] Mounted run-rpc_pipefs.mount - RPC Pipe File System.
  229. [ OK ] Reached target rpc_pipefs.target.
  230. [ OK ] Reached target nfs-client.target - NFS client services.
  231. [ OK ] Reached target remote-fs-p…eparation for Remote File Systems.
  232. [ OK ] Reached target remote-fs.target - Remote File Systems.
  233. [ OK ] Finished systemd-update-ut…cord System Boot/Shutdown in UTMP.
  234. [ OK ] Started systemd-resolved.s…ice - Network Name Resolution.
  235. [ OK ] Reached target nss-lookup.…m - Host and Network Name Lookups.
  236. [ OK ] Reached target sysinit.target - System Initialization.
  237. [ OK ] Started systemd-tmpfiles-c… Cleanup of Temporary Directories.
  238. [ OK ] Listening on dbus.socket…- D-Bus System Message Bus Socket.
  239. [ OK ] Reached target sockets.target - Socket Units.
  240. Starting armbian-hardware-…m - Armbian hardware monitoring...
  241. Starting armbian-hardware-…- Armbian hardware optimization...
  242. [ OK ] Finished armbian-hardware-…[0m - Armbian hardware monitoring.
  243. [ OK ] Finished armbian-hardware-…m - Armbian hardware optimization.
  244. [ OK ] Reached target basic.target - Basic System.
  245. Starting alsa-restore.serv…- Save/Restore Sound Card State...
  246. [ OK ] Started cron.service -…kground program processing daemon.
  247. Starting dbus.service - D-Bus System Message Bus...
  248. Starting e2scrub_reap.serv…e ext4 Metadata Check Snapshots...
  249. Starting loadcpufreq.servi…eeded to enable cpufreq scaling...
  250. Starting rng-tools-debian.…LSB: rng-tools (Debian variant)...
  251. Starting rsyslog.service - System Logging Service...
  252. Starting sysstat.service - Resets System Activity Logs...
  253. Starting systemd-logind.se…ice - User Login Management...
  254. [ OK ] Finished alsa-restore.serv…m - Save/Restore Sound Card State.
  255. [ OK ] Reached target sound.target - Sound Card.
  256. [ OK ] Started rsyslog.service - System Logging Service.
  257. [ OK ] Finished sysstat.service - Resets System Activity Logs.
  258. [ OK ] Started dbus.service - D-Bus System Message Bus.
  259. Starting NetworkManager.service - Network Manager...
  260. Starting wpa_supplicant.service - WPA supplicant...
  261. [ OK ] Started rng-tools-debian.s…- LSB: rng-tools (Debian variant).
  262. [ OK ] Finished e2scrub_reap.serv…ine ext4 Metadata Check Snapshots.
  263. [ OK ] Started wpa_supplicant.service - WPA supplicant.
  264. [ OK ] Started loadcpufreq.servic… needed to enable cpufreq scaling.
  265. Starting cpufrequtils.serv…: set CPUFreq kernel parameters...
  266. [ OK ] Started systemd-logind.service - User Login Management.
  267. [ OK ] Started NetworkManager.service - Network Manager.
  268. [ OK ] Reached target network.target - Network.
  269. [ OK ] Reached target network-online.target - Network is Online.
  270. Starting chrony.service - chrony, an NTP client/server...
  271. Starting openvpn.service - OpenVPN service...
  272. Starting rc-local.service…m - /etc/rc.local Compatibility...
  273. Starting rpc-statd-notify.…- Notify NFS peers of a restart...
  274. Starting ssh.service - OpenBSD Secure Shell server...
  275. Starting systemd-user-sess…vice - Permit User Sessions...
  276. [ OK ] Started unattended-upgrade…0m - Unattended Upgrades Shutdown.
  277. [ OK ] Started vnstat.service - vnStat network traffic monitor.
  278. [ OK ] Started cpufrequtils.servi…SB: set CPUFreq kernel parameters.
  279. [ OK ] Finished openvpn.service - OpenVPN service.
  280. [ OK ] Started rc-local.service - /etc/rc.local Compatibility.
  281. [ OK ] Started rpc-statd-notify.s…m - Notify NFS peers of a restart.
  282. [ OK ] Finished systemd-user-sess…ervice - Permit User Sessions.
  283. Starting plymouth-quit-wai… until boot process finishes up...
  284. Starting plymouth-quit.ser… Terminate Plymouth Boot Screen...
  285. Starting sysfsutils.servic… variables from /etc/sysfs.conf...
  286. Starting systemd-hostnamed.service - Hostname Service...
  287. [ OK ] Started chrony.service - chrony, an NTP client/server.
  288.  
  289. Armbian 24.2.1 Bookworm ttyS2
  290.  
  291.  
  292. rockpro64 login: root
  293. Password:
  294. ____ _ ____ __ _ _
  295. | _ \ ___ ___| | _| _ \ _ __ ___ / /_ | || |
  296. | |_) / _ \ / __| |/ / |_) | '__/ _ \ | '_ \| || |_
  297. | _ < (_) | (__| <| __/| | | (_) | | (_) |__ _|
  298. |_| \_\___/ \___|_|\_\_| |_| \___/ \___/ |_|
  299.  
  300. Welcome to Armbian 24.2.1 Bookworm with Linux 6.6.16-current-rockchip64
  301.  
  302. System load: 5% Up time: 3 min
  303. Memory usage: 4% of 3.71G IP: 192.168.1.242
  304. CPU temp: 36°C Usage of /: 12% of 916G
  305. RX today: 1.0 MiB
  306.  
  307. [ General system configuration (beta): armbian-config ]
  308.  
  309. Last login: Wed Apr 3 23:30:47 PDT 2024 from 192.168.1.20 on pts/0
  310. root@rockpro64:~# lspci -vv
  311. 00:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3399 PCI Express Root Port (prog-if 00 [Normal decode])
  312. Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  313. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  314. Latency: 0
  315. Interrupt: pin A routed to IRQ 58
  316. Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
  317. Memory behind bridge: fa000000-fa0fffff [size=1M] [32-bit]
  318. Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  319. BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
  320. PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  321. Capabilities: [80] Power Management version 3
  322. Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
  323. Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  324. Capabilities: [90] MSI: Enable+ Count=1/1 Maskable+ 64bit+
  325. Address: 00000000fee30040 Data: 0000
  326. Masking: 00000000 Pending: 00000000
  327. Capabilities: [b0] MSI-X: Enable- Count=1 Masked-
  328. Vector table: BAR=0 offset=00000000
  329. PBA: BAR=0 offset=00000008
  330. Capabilities: [c0] Express (v2) Root Port (Slot+), MSI 00
  331. DevCap: MaxPayload 256 bytes, PhantFunc 0
  332. ExtTag- RBE+
  333. DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
  334. RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  335. MaxPayload 256 bytes, MaxReadReq 512 bytes
  336. DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
  337. LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L1, Exit Latency L1 <8us
  338. ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp+
  339. LnkCtl: ASPM Disabled; RCB 128 bytes, Disabled- CommClk+
  340. ExtSynch- ClockPM- AutWidDis- BWInt+ AutBWInt+
  341. LnkSta: Speed 2.5GT/s, Width x1
  342. TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  343. SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
  344. Slot #0, PowerLimit 0W; Interlock- NoCompl-
  345. SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
  346. Control: AttnInd Off, PwrInd Off, Power+ Interlock-
  347. SltSta: Status: AttnBtn- PowerFlt- MRL+ CmdCplt- PresDet- Interlock-
  348. Changed: MRL- PresDet- LinkState-
  349. RootCap: CRSVisible-
  350. RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
  351. RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  352. DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR+
  353. 10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- EETLPPrefix-
  354. EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
  355. FRS- LN System CLS Not Supported, TPHComp+ ExtTPHComp- ARIFwd+
  356. AtomicOpsCap: Routing+ 32bit- 64bit- 128bitCAS-
  357. DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ 10BitTagReq- OBFF Disabled, ARIFwd+
  358. AtomicOpsCtl: ReqEn- EgressBlck-
  359. LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
  360. Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  361. Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
  362. LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1-
  363. EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
  364. Retimer- 2Retimers- CrosslinkRes: unsupported
  365. Capabilities: [100 v2] Advanced Error Reporting
  366. UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  367. UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  368. UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  369. CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
  370. CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
  371. AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
  372. MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
  373. HeaderLog: 00000000 00000000 00000000 00000000
  374. RootCmd: CERptEn+ NFERptEn+ FERptEn+
  375. RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
  376. FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
  377. ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
  378. Capabilities: [274 v1] Transaction Processing Hints
  379. Interrupt vector mode supported
  380. Device specific mode supported
  381. Steering table in TPH capability structure
  382. Kernel driver in use: pcieport
  383.  
  384. 01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/PM9A3/980PRO (prog-if 02 [NVM Express])
  385. Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller PM9A1/PM9A3/980PRO (SSD 980 PRO)
  386. Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  387. Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  388. Latency: 0
  389. Interrupt: pin A routed to IRQ 57
  390. Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=16K]
  391. Capabilities: [40] Power Management version 3
  392. Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  393. Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
  394. Capabilities: [50] MSI: Enable- Count=1/32 Maskable- 64bit+
  395. Address: 0000000000000000 Data: 0000
  396. Capabilities: [70] Express (v2) Endpoint, MSI 00
  397. DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
  398. ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0W
  399. DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
  400. RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
  401. MaxPayload 256 bytes, MaxReadReq 512 bytes
  402. DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
  403. LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <64us
  404. ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
  405. LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
  406. ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  407. LnkSta: Speed 2.5GT/s (downgraded), Width x1 (downgraded)
  408. TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  409. DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+
  410. 10BitTagComp+ 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
  411. EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
  412. FRS- TPHComp- ExtTPHComp-
  413. AtomicOpsCap: 32bit- 64bit- 128bitCAS-
  414. DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ 10BitTagReq- OBFF Disabled,
  415. AtomicOpsCtl: ReqEn-
  416. LnkCap2: Supported Link Speeds: 2.5-16GT/s, Crosslink- Retimer+ 2Retimers+ DRS-
  417. LnkCtl2: Target Link Speed: 16GT/s, EnterCompliance- SpeedDis-
  418. Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
  419. Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
  420. LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
  421. EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
  422. Retimer- 2Retimers- CrosslinkRes: Upstream Port
  423. Capabilities: [b0] MSI-X: Enable+ Count=130 Masked-
  424. Vector table: BAR=0 offset=00003000
  425. PBA: BAR=0 offset=00002000
  426. Capabilities: [100 v2] Advanced Error Reporting
  427. UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  428. UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  429. UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  430. CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
  431. CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
  432. AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
  433. MultHdrRecCap+ MultHdrRecEn- TLPPfxPres- HdrLogCap-
  434. HeaderLog: 00000000 00000000 00000000 00000000
  435. Capabilities: [168 v1] Alternative Routing-ID Interpretation (ARI)
  436. ARICap: MFVC- ACS-, Next Function: 0
  437. ARICtl: MFVC- ACS-, Function Group: 0
  438. Capabilities: [178 v1] Secondary PCI Express
  439. LnkCtl3: LnkEquIntrruptEn- PerformEqu-
  440. LaneErrStat: 0
  441. Capabilities: [198 v1] Physical Layer 16.0 GT/s <?>
  442. Capabilities: [1bc v1] Lane Margining at the Receiver <?>
  443. Capabilities: [214 v1] Latency Tolerance Reporting
  444. Max snoop latency: 0ns
  445. Max no snoop latency: 0ns
  446. Capabilities: [21c v1] L1 PM Substates
  447. L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
  448. PortCommonModeRestoreTime=10us PortTPowerOnTime=10us
  449. L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
  450. T_CommonMode=0us LTR1.2_Threshold=0ns
  451. L1SubCtl2: T_PwrOn=10us
  452. Capabilities: [3a0 v1] Data Link Feature <?>
  453. Kernel driver in use: nvme
  454.  
  455. root@rockpro64:~#
  456.  
  457.  
  458.  
  459.  
  460.  
  461.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement