SHARE
TWEET

dir-615 H2 dmesg

a guest Jun 22nd, 2013 128 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. $ cat dir615h-ddwrt.dmesg
  2.  
  3.         <5>Linux version 3.2.41-svn21039 (root@dd-wrt) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #102 Mon Mar 25 10:47:36 CET 2013
  4.         <7>prom: fw_arg0=00000001, fw_arg1=81f4afb0, fw_arg2=01f4b3b0, fw_arg3=00000000
  5.         <7>argv[0]=  (null) is invalid, skipping
  6.         <7>env[0]: memsize=32
  7.         <7>env[1]: initrd_start=0x00000000
  8.         <7>env[2]: initrd_size=0x0
  9.         <7>env[3]: flash_start=0x00000000
  10.         <7>env[4]: flash_size=0x400000
  11.         <7>env[0]: memsize=32
  12.         <7>env[1]: initrd_start=0x00000000
  13.         <7>env[2]: initrd_size=0x0
  14.         <7>env[3]: flash_start=0x00000000
  15.         <7>env[4]: flash_size=0x400000
  16.         <6>bootconsole [early0] enabled
  17.         <6>CPU revision is: 0001964c (MIPS 24KEc)
  18.         <6>Ralink RT3352 id:1 rev:6 running at 400.00 MHz
  19.         <6>Determined physical RAM map:
  20.         <6> memory: 02000000 @ 00000000 (usable)
  21.         <4>Zone PFN ranges:
  22.         <4>  Normal   0x00000000 -> 0x00002000
  23.         <4>Movable zone start PFN for each node
  24.         <4>early_node_map[1] active PFN ranges
  25.         <4>    0: 0x00000000 -> 0x00002000
  26.         <7>On node 0 totalpages: 8192
  27.         <7>free_area_init_node: node 0, pgdat 802ac7a0, node_mem_map 81000000
  28.         <7>  Normal zone: 64 pages used for memmap
  29.         <7>  Normal zone: 0 pages reserved
  30.         <7>  Normal zone: 8128 pages, LIFO batch:0
  31.         <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  32.         <7>pcpu-alloc: [0] 0
  33.         <4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
  34.         <5>Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 rootfstype=squashfs noinitrd
  35.         <6>PID hash table entries: 128 (order: -3, 512 bytes)
  36.         <6>Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  37.         <6>Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  38.         <4>Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  39.         <4>Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  40.         <6>Writing ErrCtl register=00000000
  41.         <6>Readback ErrCtl register=00000000
  42.         <6>Memory: 29272k/32768k available (2196k kernel code, 3496k reserved, 543k data, 160k init, 0k highmem)
  43.         <6>NR_IRQS:48
  44.         <6>console [ttyS1] enabled, bootconsole disabled
  45.         <6>Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  46.         <6>pid_max: default: 32768 minimum: 301
  47.         <6>Mount-cache hash table entries: 512
  48.         <6>NET: Registered protocol family 16
  49.         <6>bio: create slab  at 0
  50.         <6>Switching to clocksource MIPS
  51.         <6>NET: Registered protocol family 2
  52.         <6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  53.         <6>TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  54.         <6>TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  55.         <6>TCP: Hash tables configured (established 1024 bind 1024)
  56.         <6>TCP reno registered
  57.         <6>UDP hash table entries: 256 (order: 0, 4096 bytes)
  58.         <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  59.         <6>NET: Registered protocol family 1
  60.         <6>squashfs: version 3.0 (2006/03/15) Phillip Lougher
  61.         <6>msgmni has been set to 57
  62.         <6>io scheduler noop registered
  63.         <6>io scheduler deadline registered (default)
  64.         <6>Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  65.         <6>serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
  66.         <6>serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
  67.         <4>Ralink gpio driver initialized
  68.         <6>system type: RT3352
  69.         <6>boot type: 3
  70.         <6>ralink spi driver
  71.         <6>system type: RT3352
  72.         <6>boot type: 3
  73.         <4>deice id : c2 20 16 c2 20 (2016c220)
  74.         <4>MX25L3205D(c2 2016c220) (4096 Kbytes)
  75.         <4>mtd .name = raspi, .size = 0x00400000 (0M) .erasesize = 0x00000004 (0K) .numeraseregions = 65536
  76.         <0>
  77.         <0>found squashfs at 145000
  78.         <5>Creating 6 MTD partitions on "raspi":
  79.         <5>0x000000000000-0x000000030000 : "uboot"
  80.         <5>0x000000030000-0x000000040000 : "uboot-config"
  81.         <5>0x000000040000-0x000000050000 : "factory-defaults"
  82.         <5>0x000000050000-0x0000003f0000 : "linux"
  83.         <5>0x000000145000-0x0000003f0000 : "rootfs"
  84.         <4>mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  85.         <5>0x0000003f0000-0x000000400000 : "nvram"
  86.         <6>tun: Universal TUN/TAP device driver, 1.6
  87.         <6>tun: (C) 1999-2004 Max Krasnyansky
  88.         <6>PPP generic driver version 2.4.2
  89.         <6>PPP BSD Compression module registered
  90.         <6>PPP Deflate Compression module registered
  91.         <6>NET: Registered protocol family 24
  92.         <6>Ralink APSoC Hardware Watchdog Timer
  93.         <6>u32 classifier
  94.         <6>    Performance counters on
  95.         <6>    Actions configured
  96.         <6>Netfilter messages via NETLINK v0.30.
  97.         <6>nf_conntrack version 0.5.0 (457 buckets, 1828 max)
  98.         <6>ctnetlink v0.93: registering with nfnetlink.
  99.         <6>IPv4 over IPv4 tunneling driver
  100.         <6>ip_tables: (C) 2000-2006 Netfilter Core Team
  101.         <6>IPP2P v0.8.2 loading
  102.         <6>ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  103.         <6>TCP bic registered
  104.         <6>TCP cubic registered
  105.         <6>TCP westwood registered
  106.         <6>TCP highspeed registered
  107.         <6>TCP hybla registered
  108.         <6>TCP htcp registered
  109.         <6>TCP vegas registered
  110.         <6>TCP scalable registered
  111.         <6>NET: Registered protocol family 17
  112.         <5>Bridge firewalling registered
  113.         <6>8021q: 802.1Q VLAN Support v1.8
  114.         <6>searching for nvram
  115.         <6>nvram size = 0
  116.         <0>Broken NVRAM found, recovering it (Magic 20031985)
  117.         <4>MAC_ADRH -- : 0x0000000c
  118.         <4>MAC_ADRL -- : 0x434462ed
  119.         <4>MAC_ADRH -- : 0x0000000c
  120.         <4>MAC_ADRL -- : 0x434462ed
  121.         <4>Ralink APSoC Ethernet Driver Initilization. v2.0  256 rx/tx descriptors allocated, mtu = 1500!
  122.         <4>NAPI enable, Tx Ring = 256, Rx Ring = 256
  123.         <4>MAC_ADRH -- : 0x0000000c
  124.         <4>MAC_ADRL -- : 0x434462ed
  125.         <6>VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  126.         <6>Freeing unused kernel memory: 160k freed
  127.         <4>rt2860v2_ap: module license 'unspecified' taints kernel.
  128.         <4>Disabling lock debugging due to kernel taint
  129.         <4>MAC_ADRH -- : 0x0000c8d3
  130.         <4>MAC_ADRL -- : 0xa304cfaa
  131.         <4>
  132.         <4>phy_tx_ring = 0x014ff000, tx_ring = 0xa14ff000
  133.         <4>
  134.         <4>phy_rx_ring0 = 0x015c0000, rx_ring0 = 0xa15c0000
  135.         <4>RT305x_ESW: Link Status Changed
  136.         <4>CDMA_CSG_CFG = 81000007
  137.         <4>GDMA1_FWD_CFG = C0710000
  138.         <6>device vlan1 entered promiscuous mode
  139.         <6>device eth2 entered promiscuous mode
  140.         <6>br0: port 1(vlan1) entering forwarding state
  141.         <6>br0: port 1(vlan1) entering forwarding state
  142.         <4>RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
  143.         <4>0x1300 = 00064380
  144.         <4>0x1300 = 00064380
  145.         <6>device ra0 entered promiscuous mode
  146.         <6>br0: port 2(ra0) entering forwarding state
  147.         <6>br0: port 2(ra0) entering forwarding state
  148.         <6>br0: port 1(vlan1) entering forwarding state
  149.         <6>device vlan2 entered promiscuous mode
  150.         <6>device vlan2 left promiscuous mode
  151.         <6>br0: port 2(ra0) entering forwarding state
  152.         <4>RT305x_ESW: Link Status Changed
  153.         <4>RT305x_ESW: Link Status Changed
  154.         <4>RT305x_ESW: Link Status Changed
  155.         <4>RT305x_ESW: Link Status Changed
  156.         <6>device vlan1 left promiscuous mode
  157.         <6>br0: port 1(vlan1) entering forwarding state
  158.         <6>device ra0 left promiscuous mode
  159.         <6>br0: port 2(ra0) entering forwarding state
  160.         <6>device vlan1 entered promiscuous mode
  161.         <6>br0: port 1(vlan1) entering forwarding state
  162.         <6>br0: port 1(vlan1) entering forwarding state
  163.         <4>0x1300 = 00064380
  164.         <4>0x1300 = 00064380
  165.         <6>device ra0 entered promiscuous mode
  166.         <6>br0: port 2(ra0) entering forwarding state
  167.         <6>br0: port 2(ra0) entering forwarding state
  168.         <6>br0: port 2(ra0) entering forwarding state
  169.         <4>RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
  170.         <6>device ra0 left promiscuous mode
  171.         <6>br0: port 2(ra0) entering disabled state
  172.         <6>br0: port 1(vlan1) entering forwarding state
  173.         <4>0x1300 = 00064380
  174.         <4>0x1300 = 00064380
  175.         <6>device ra0 entered promiscuous mode
  176.         <6>br0: port 2(ra0) entering forwarding state
  177.         <6>br0: port 2(ra0) entering forwarding state
  178.         <6>br0: port 2(ra0) entering forwarding state
  179.         <6>device vlan1 left promiscuous mode
  180.         <6>device eth2 left promiscuous mode
  181.         <6>br0: port 1(vlan1) entering forwarding state
  182.         <6>device ra0 left promiscuous mode
  183.         <6>br0: port 2(ra0) entering forwarding state
  184.         <6>device vlan1 entered promiscuous mode
  185.         <6>device eth2 entered promiscuous mode
  186.         <6>br0: port 1(vlan1) entering forwarding state
  187.         <6>br0: port 1(vlan1) entering forwarding state
  188.         <4>0x1300 = 00064380
  189.         <4>0x1300 = 00064380
  190.         <6>device ra0 entered promiscuous mode
  191.         <6>br0: port 2(ra0) entering forwarding state
  192.         <6>br0: port 2(ra0) entering forwarding state
  193.         <6>br0: port 2(ra0) entering forwarding state
  194.         <6>br0: port 1(vlan1) entering forwarding state
  195.         <4>RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
  196.         <6>device ra0 left promiscuous mode
  197.         <6>br0: port 2(ra0) entering disabled state
  198.         <4>0x1300 = 00064380
  199.         <4>0x1300 = 00064380
  200.         <6>device ra0 entered promiscuous mode
  201.         <6>br0: port 2(ra0) entering forwarding state
  202.         <6>br0: port 2(ra0) entering forwarding state
  203.         <6>device vlan2 entered promiscuous mode
  204.         <6>device vlan2 left promiscuous mode
  205.         <6>br0: port 2(ra0) entering forwarding state
  206.         <6>device vlan2 entered promiscuous mode
  207.         <6>device vlan2 left promiscuous mode
  208.         <6>device vlan1 left promiscuous mode
  209.         <6>br0: port 1(vlan1) entering forwarding state
  210.         <6>device ra0 left promiscuous mode
  211.         <6>br0: port 2(ra0) entering forwarding state
  212.         <6>device vlan1 entered promiscuous mode
  213.         <6>br0: port 1(vlan1) entering forwarding state
  214.         <6>br0: port 1(vlan1) entering forwarding state
  215.         <4>0x1300 = 00064380
  216.         <4>0x1300 = 00064380
  217.         <6>device ra0 entered promiscuous mode
  218.         <6>br0: port 2(ra0) entering forwarding state
  219.         <6>br0: port 2(ra0) entering forwarding state
  220.         <6>br0: port 2(ra0) entering forwarding state
  221.         <6>br0: port 1(vlan1) entering forwarding state
  222.         <4>RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
  223.         <6>device ra0 left promiscuous mode
  224.         <6>br0: port 2(ra0) entering disabled state
  225.         <4>0x1300 = 00064380
  226.         <4>0x1300 = 00064380
  227.         <6>device ra0 entered promiscuous mode
  228.         <6>br0: port 2(ra0) entering forwarding state
  229.         <6>br0: port 2(ra0) entering forwarding state<5>Linux version 3.2.41-svn21039 (root@dd-wrt) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #102 Mon Mar 25 10:47:36 CET 2013
  230.         <7>prom: fw_arg0=00000001, fw_arg1=81f4afb0, fw_arg2=01f4b3b0, fw_arg3=00000000
  231.         <7>argv[0]=  (null) is invalid, skipping
  232.         <7>env[0]: memsize=32
  233.         <7>env[1]: initrd_start=0x00000000
  234.         <7>env[2]: initrd_size=0x0
  235.         <7>env[3]: flash_start=0x00000000
  236.         <7>env[4]: flash_size=0x400000
  237.         <7>env[0]: memsize=32
  238.         <7>env[1]: initrd_start=0x00000000
  239.         <7>env[2]: initrd_size=0x0
  240.         <7>env[3]: flash_start=0x00000000
  241.         <7>env[4]: flash_size=0x400000
  242.         <6>bootconsole [early0] enabled
  243.         <6>CPU revision is: 0001964c (MIPS 24KEc)
  244.         <6>Ralink RT3352 id:1 rev:6 running at 400.00 MHz
  245.         <6>Determined physical RAM map:
  246.         <6> memory: 02000000 @ 00000000 (usable)
  247.         <4>Zone PFN ranges:
  248.         <4>  Normal   0x00000000 -> 0x00002000
  249.         <4>Movable zone start PFN for each node
  250.         <4>early_node_map[1] active PFN ranges
  251.         <4>    0: 0x00000000 -> 0x00002000
  252.         <7>On node 0 totalpages: 8192
  253.         <7>free_area_init_node: node 0, pgdat 802ac7a0, node_mem_map 81000000
  254.         <7>  Normal zone: 64 pages used for memmap
  255.         <7>  Normal zone: 0 pages reserved
  256.         <7>  Normal zone: 8128 pages, LIFO batch:0
  257.         <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  258.         <7>pcpu-alloc: [0] 0
  259.         <4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
  260.         <5>Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 rootfstype=squashfs noinitrd
  261.         <6>PID hash table entries: 128 (order: -3, 512 bytes)
  262.         <6>Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  263.         <6>Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  264.         <4>Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
  265.         <4>Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  266.         <6>Writing ErrCtl register=00000000
  267.         <6>Readback ErrCtl register=00000000
  268.         <6>Memory: 29272k/32768k available (2196k kernel code, 3496k reserved, 543k data, 160k init, 0k highmem)
  269.         <6>NR_IRQS:48
  270.         <6>console [ttyS1] enabled, bootconsole disabled
  271.         <6>Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  272.         <6>pid_max: default: 32768 minimum: 301
  273.         <6>Mount-cache hash table entries: 512
  274.         <6>NET: Registered protocol family 16
  275.         <6>bio: create slab  at 0
  276.         <6>Switching to clocksource MIPS
  277.         <6>NET: Registered protocol family 2
  278.         <6>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  279.         <6>TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  280.         <6>TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  281.         <6>TCP: Hash tables configured (established 1024 bind 1024)
  282.         <6>TCP reno registered
  283.         <6>UDP hash table entries: 256 (order: 0, 4096 bytes)
  284.         <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  285.         <6>NET: Registered protocol family 1
  286.         <6>squashfs: version 3.0 (2006/03/15) Phillip Lougher
  287.         <6>msgmni has been set to 57
  288.         <6>io scheduler noop registered
  289.         <6>io scheduler deadline registered (default)
  290.         <6>Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  291.         <6>serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
  292.         <6>serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
  293.         <4>Ralink gpio driver initialized
  294.         <6>system type: RT3352
  295.         <6>boot type: 3
  296.         <6>ralink spi driver
  297.         <6>system type: RT3352
  298.         <6>boot type: 3
  299.         <4>deice id : c2 20 16 c2 20 (2016c220)
  300.         <4>MX25L3205D(c2 2016c220) (4096 Kbytes)
  301.         <4>mtd .name = raspi, .size = 0x00400000 (0M) .erasesize = 0x00000004 (0K) .numeraseregions = 65536
  302.         <0>
  303.         <0>found squashfs at 145000
  304.         <5>Creating 6 MTD partitions on "raspi":
  305.         <5>0x000000000000-0x000000030000 : "uboot"
  306.         <5>0x000000030000-0x000000040000 : "uboot-config"
  307.         <5>0x000000040000-0x000000050000 : "factory-defaults"
  308.         <5>0x000000050000-0x0000003f0000 : "linux"
  309.         <5>0x000000145000-0x0000003f0000 : "rootfs"
  310.         <4>mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  311.         <5>0x0000003f0000-0x000000400000 : "nvram"
  312.         <6>tun: Universal TUN/TAP device driver, 1.6
  313.         <6>tun: (C) 1999-2004 Max Krasnyansky
  314.         <6>PPP generic driver version 2.4.2
  315.         <6>PPP BSD Compression module registered
  316.         <6>PPP Deflate Compression module registered
  317.         <6>NET: Registered protocol family 24
  318.         <6>Ralink APSoC Hardware Watchdog Timer
  319.         <6>u32 classifier
  320.         <6>    Performance counters on
  321.         <6>    Actions configured
  322.         <6>Netfilter messages via NETLINK v0.30.
  323.         <6>nf_conntrack version 0.5.0 (457 buckets, 1828 max)
  324.         <6>ctnetlink v0.93: registering with nfnetlink.
  325.         <6>IPv4 over IPv4 tunneling driver
  326.         <6>ip_tables: (C) 2000-2006 Netfilter Core Team
  327.         <6>IPP2P v0.8.2 loading
  328.         <6>ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  329.         <6>TCP bic registered
  330.         <6>TCP cubic registered
  331.         <6>TCP westwood registered
  332.         <6>TCP highspeed registered
  333.         <6>TCP hybla registered
  334.         <6>TCP htcp registered
  335.         <6>TCP vegas registered
  336.         <6>TCP scalable registered
  337.         <6>NET: Registered protocol family 17
  338.         <5>Bridge firewalling registered
  339.         <6>8021q: 802.1Q VLAN Support v1.8
  340.         <6>searching for nvram
  341.         <6>nvram size = 0
  342.         <0>Broken NVRAM found, recovering it (Magic 20031985)
  343.         <4>MAC_ADRH -- : 0x0000000c
  344.         <4>MAC_ADRL -- : 0x434462ed
  345.         <4>MAC_ADRH -- : 0x0000000c
  346.         <4>MAC_ADRL -- : 0x434462ed
  347.         <4>Ralink APSoC Ethernet Driver Initilization. v2.0  256 rx/tx descriptors allocated, mtu = 1500!
  348.         <4>NAPI enable, Tx Ring = 256, Rx Ring = 256
  349.         <4>MAC_ADRH -- : 0x0000000c
  350.         <4>MAC_ADRL -- : 0x434462ed
  351.         <6>VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  352.         <6>Freeing unused kernel memory: 160k freed
  353.         <4>rt2860v2_ap: module license 'unspecified' taints kernel.
  354.         <4>Disabling lock debugging due to kernel taint
  355.         <4>MAC_ADRH -- : 0x0000c8d3
  356.         <4>MAC_ADRL -- : 0xa304cfaa
  357.         <4>
  358.         <4>phy_tx_ring = 0x014ff000, tx_ring = 0xa14ff000
  359.         <4>
  360.         <4>phy_rx_ring0 = 0x015c0000, rx_ring0 = 0xa15c0000
  361.         <4>RT305x_ESW: Link Status Changed
  362.         <4>CDMA_CSG_CFG = 81000007
  363.         <4>GDMA1_FWD_CFG = C0710000
  364.         <6>device vlan1 entered promiscuous mode
  365.         <6>device eth2 entered promiscuous mode
  366.         <6>br0: port 1(vlan1) entering forwarding state
  367.         <6>br0: port 1(vlan1) entering forwarding state
  368.         <4>RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
  369.         <4>0x1300 = 00064380
  370.         <4>0x1300 = 00064380
  371.         <6>device ra0 entered promiscuous mode
  372.         <6>br0: port 2(ra0) entering forwarding state
  373.         <6>br0: port 2(ra0) entering forwarding state
  374.         <6>br0: port 1(vlan1) entering forwarding state
  375.         <6>device vlan2 entered promiscuous mode
  376.         <6>device vlan2 left promiscuous mode
  377.         <6>br0: port 2(ra0) entering forwarding state
  378.         <4>RT305x_ESW: Link Status Changed
  379.         <4>RT305x_ESW: Link Status Changed
  380.         <4>RT305x_ESW: Link Status Changed
  381.         <4>RT305x_ESW: Link Status Changed
  382.         <6>device vlan1 left promiscuous mode
  383.         <6>br0: port 1(vlan1) entering forwarding state
  384.         <6>device ra0 left promiscuous mode
  385.         <6>br0: port 2(ra0) entering forwarding state
  386.         <6>device vlan1 entered promiscuous mode
  387.         <6>br0: port 1(vlan1) entering forwarding state
  388.         <6>br0: port 1(vlan1) entering forwarding state
  389.         <4>0x1300 = 00064380
  390.         <4>0x1300 = 00064380
  391.         <6>device ra0 entered promiscuous mode
  392.         <6>br0: port 2(ra0) entering forwarding state
  393.         <6>br0: port 2(ra0) entering forwarding state
  394.         <6>br0: port 2(ra0) entering forwarding state
  395.         <4>RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
  396.         <6>device ra0 left promiscuous mode
  397.         <6>br0: port 2(ra0) entering disabled state
  398.         <6>br0: port 1(vlan1) entering forwarding state
  399.         <4>0x1300 = 00064380
  400.         <4>0x1300 = 00064380
  401.         <6>device ra0 entered promiscuous mode
  402.         <6>br0: port 2(ra0) entering forwarding state
  403.         <6>br0: port 2(ra0) entering forwarding state
  404.         <6>br0: port 2(ra0) entering forwarding state
  405.         <6>device vlan1 left promiscuous mode
  406.         <6>device eth2 left promiscuous mode
  407.         <6>br0: port 1(vlan1) entering forwarding state
  408.         <6>device ra0 left promiscuous mode
  409.         <6>br0: port 2(ra0) entering forwarding state
  410.         <6>device vlan1 entered promiscuous mode
  411.         <6>device eth2 entered promiscuous mode
  412.         <6>br0: port 1(vlan1) entering forwarding state
  413.         <6>br0: port 1(vlan1) entering forwarding state
  414.         <4>0x1300 = 00064380
  415.         <4>0x1300 = 00064380
  416.         <6>device ra0 entered promiscuous mode
  417.         <6>br0: port 2(ra0) entering forwarding state
  418.         <6>br0: port 2(ra0) entering forwarding state
  419.         <6>br0: port 2(ra0) entering forwarding state
  420.         <6>br0: port 1(vlan1) entering forwarding state
  421.         <4>RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
  422.         <6>device ra0 left promiscuous mode
  423.         <6>br0: port 2(ra0) entering disabled state
  424.         <4>0x1300 = 00064380
  425.         <4>0x1300 = 00064380
  426.         <6>device ra0 entered promiscuous mode
  427.         <6>br0: port 2(ra0) entering forwarding state
  428.         <6>br0: port 2(ra0) entering forwarding state
  429.         <6>device vlan2 entered promiscuous mode
  430.         <6>device vlan2 left promiscuous mode
  431.         <6>br0: port 2(ra0) entering forwarding state
  432.         <6>device vlan2 entered promiscuous mode
  433.         <6>device vlan2 left promiscuous mode
  434.         <6>device vlan1 left promiscuous mode
  435.         <6>br0: port 1(vlan1) entering forwarding state
  436.         <6>device ra0 left promiscuous mode
  437.         <6>br0: port 2(ra0) entering forwarding state
  438.         <6>device vlan1 entered promiscuous mode
  439.         <6>br0: port 1(vlan1) entering forwarding state
  440.         <6>br0: port 1(vlan1) entering forwarding state
  441.         <4>0x1300 = 00064380
  442.         <4>0x1300 = 00064380
  443.         <6>device ra0 entered promiscuous mode
  444.         <6>br0: port 2(ra0) entering forwarding state
  445.         <6>br0: port 2(ra0) entering forwarding state
  446.         <6>br0: port 2(ra0) entering forwarding state
  447.         <6>br0: port 1(vlan1) entering forwarding state
  448. <4>RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
  449. <6>device ra0 left promiscuous mode
  450. <6>br0: port 2(ra0) entering disabled state
  451. <4>0x1300 = 00064380
  452. <4>0x1300 = 00064380
  453. <6>device ra0 entered promiscuous mode
  454. <6>br0: port 2(ra0) entering forwarding state
  455. <6>br0: port 2(ra0) entering forwarding state
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top