Failure at line:13 in 'Target Software Startup Scripts'. Please edit the debug configuration settings.

Load Failed

[0.000] init():  Atollic TrueSTUDIO gdbserver for ST-Link. Version 4.2.2 (WIN32 2018-02-26 16:20:21 15675)
[1.229] reset_hw_wtchpt_module():  Hardware watchpoint supported by the target
[1.233] createFlashParams():  STM32 device: Flash size =1024
[1.335] STM32_AppReset():  Enter STM32_AppReset() function
[1.440] STM32_AppReset():  NVIC_DFSR_REG = 0x00000009
[1.441] STM32_AppReset():  NVIC_CFGFSR_REG = 0x00000000
[1.442] STM32_AppReset():  XPSR = 0x01000000
[1.442] Device_Initialise():  ST_LINK Major version =2 Jtag version =27
[1.442] Device_Initialise():  ST_LINK VID=1155 PID=14155
[1.442] Device_Initialise():  ST_LINK device status: HALT_MODE
[1.442] Device_Initialise():  ST_LINK detects target voltage =3.26 Volt
[1.443] initServerContext():  ST-Link device initialization OK
[1.445] WaitConnection():  Waiting for connection on port 61234...
[2.028] WaitConnection():  Accepted connection on port 61234...
[2.028] Device_GetStatus():  ST_LINK device status: HALT_MODE
[2.045] handlePacket():  Reading 0x4 bytes of memory from addr 0x8006b54
[2.045] handlePacket():  Reading 0x2 bytes of memory from addr 0x8006b54
[2.069] handlePacket():  Reading 0x20 bytes of memory from addr 0xe00fffd0
[2.071] handlePacket():  Reading 0x2 bytes of memory from addr 0x807a
[2.071] handlePacket():  Reading 0x2 bytes of memory from addr 0x807e
[2.084] STM32_AppReset():  Enter STM32_AppReset() function
[2.189] STM32_AppReset():  NVIC_DFSR_REG = 0x00000009
[2.190] STM32_AppReset():  NVIC_CFGFSR_REG = 0x00000000
[2.191] STM32_AppReset():  XPSR = 0x01000000
[2.755] handlePacket():  Reading 0x4 bytes of memory from addr 0xffffffff
[2.755] handlePacket():  Reading 0x4 bytes of memory from addr 0xffffffff
[2.930] handlePacket():  Reading 0x40 bytes of memory from addr 0x8006b40
[2.932] handlePacket():  Reading 0x40 bytes of memory from addr 0x8006b80
[6.065] STM32_AppReset():  Enter STM32_AppReset() function
[6.170] STM32_AppReset():  NVIC_DFSR_REG = 0x00000009
[6.171] STM32_AppReset():  NVIC_CFGFSR_REG = 0x00000000
[6.172] STM32_AppReset():  XPSR = 0x01000000