Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.10.28-Unraid] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Green
- Device Model: WDC WD40EZRX-00SPEB0
- Serial Number: WD-WCC4E4DL7XUL
- LU WWN Device Id: 5 0014ee 20bb1a1b0
- Firmware Version: 80.00A80
- User Capacity: 4,000,787,030,016 bytes [4.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sat Apr 2 04:28:15 2022 AEDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Disabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (51060) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 511) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x7035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1355
- 3 Spin_Up_Time POS--K 242 173 021 - 4900
- 4 Start_Stop_Count -O--CK 071 071 000 - 29441
- 5 Reallocated_Sector_Ct PO--CK 193 193 140 - 220
- 7 Seek_Error_Rate -OSR-K 188 162 000 - 695
- 9 Power_On_Hours -O--CK 076 076 000 - 17998
- 10 Spin_Retry_Count -O--CK 100 100 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
- 12 Power_Cycle_Count -O--CK 071 071 000 - 29417
- 192 Power-Off_Retract_Count -O--CK 173 173 000 - 20852
- 193 Load_Cycle_Count -O--CK 054 054 000 - 440416
- 194 Temperature_Celsius -O---K 122 097 000 - 30
- 196 Reallocated_Event_Count -O--CK 182 182 000 - 18
- 197 Current_Pending_Sector -O--CK 200 200 000 - 7
- 198 Offline_Uncorrectable ----CK 200 200 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 2
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
- 0xb7 GPL,SL VS 39 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 93 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- Device Error Count: 529 (device log contains only the most recent 24 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 529 [0] occurred at disk power-on lifetime: 17982 hours (749 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 01 d1 c0 bb 8b 40 00 Error: UNC at LBA = 0x1d1c0bb8b = 7814036363
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 28 00 01 d1 c0 bb 8f 40 00 00:08:39.281 READ FPDMA QUEUED
- 60 00 01 00 20 00 01 d1 c0 bb 8e 40 00 00:08:39.281 READ FPDMA QUEUED
- 60 00 01 00 18 00 01 d1 c0 bb 8b 40 00 00:08:39.281 READ FPDMA QUEUED
- 60 00 01 00 10 00 01 d1 c0 bb 8c 40 00 00:08:39.281 READ FPDMA QUEUED
- 60 00 01 00 08 00 01 d1 c0 bb 8d 40 00 00:08:39.281 READ FPDMA QUEUED
- Error 528 [23] occurred at disk power-on lifetime: 17982 hours (749 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 01 d1 c0 bb 8a 40 00 Error: UNC at LBA = 0x1d1c0bb8a = 7814036362
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 28 00 01 d1 c0 bb 8d 40 00 00:08:35.850 READ FPDMA QUEUED
- 60 00 01 00 20 00 01 d1 c0 bb 8c 40 00 00:08:35.850 READ FPDMA QUEUED
- 60 00 01 00 18 00 01 d1 c0 bb 8b 40 00 00:08:35.850 READ FPDMA QUEUED
- 60 00 01 00 10 00 01 d1 c0 bb 8a 40 00 00:08:35.850 READ FPDMA QUEUED
- 60 00 01 00 08 00 01 d1 c0 bb 8e 40 00 00:08:35.850 READ FPDMA QUEUED
- Error 527 [22] occurred at disk power-on lifetime: 17982 hours (749 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 01 d1 c0 bb 89 40 00 Error: UNC at LBA = 0x1d1c0bb89 = 7814036361
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 30 00 01 d1 c0 bb 8f 40 00 00:08:32.420 READ FPDMA QUEUED
- 60 00 01 00 28 00 01 d1 c0 bb 8e 40 00 00:08:32.420 READ FPDMA QUEUED
- 60 00 01 00 20 00 01 d1 c0 bb 89 40 00 00:08:32.420 READ FPDMA QUEUED
- 60 00 01 00 18 00 01 d1 c0 bb 8a 40 00 00:08:32.420 READ FPDMA QUEUED
- 60 00 01 00 10 00 01 d1 c0 bb 8b 40 00 00:08:32.420 READ FPDMA QUEUED
- Error 526 [21] occurred at disk power-on lifetime: 17982 hours (749 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 01 d1 c0 bb 88 40 00 Error: UNC at LBA = 0x1d1c0bb88 = 7814036360
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 38 00 01 d1 c0 bb 8f 40 00 00:08:29.086 READ FPDMA QUEUED
- 60 00 01 00 30 00 01 d1 c0 bb 8e 40 00 00:08:29.075 READ FPDMA QUEUED
- 60 00 01 00 28 00 01 d1 c0 bb 8d 40 00 00:08:29.064 READ FPDMA QUEUED
- 60 00 01 00 20 00 01 d1 c0 bb 8c 40 00 00:08:29.053 READ FPDMA QUEUED
- 60 00 01 00 18 00 01 d1 c0 bb 8b 40 00 00:08:29.042 READ FPDMA QUEUED
- Error 525 [20] occurred at disk power-on lifetime: 17982 hours (749 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 01 d1 c0 bb 88 40 00 Error: UNC at LBA = 0x1d1c0bb88 = 7814036360
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 02 00 00 00 00 01 d1 c0 ba 40 40 00 00:08:25.381 READ FPDMA QUEUED
- 60 01 f8 00 00 00 00 00 00 02 48 40 00 00:08:25.380 READ FPDMA QUEUED
- 60 00 f8 00 20 00 00 00 00 01 48 40 00 00:08:25.380 READ FPDMA QUEUED
- 60 00 78 00 18 00 00 00 00 00 c8 40 00 00:08:25.380 READ FPDMA QUEUED
- 60 00 30 00 10 00 00 00 00 00 88 40 00 00:08:25.379 READ FPDMA QUEUED
- Error 524 [19] occurred at disk power-on lifetime: 17982 hours (749 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 01 d1 c0 bb 8e 40 00 Error: UNC at LBA = 0x1d1c0bb8e = 7814036366
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 08 00 01 d1 c0 bb 8e 40 00 00:07:47.798 READ FPDMA QUEUED
- 60 00 01 00 00 00 01 d1 c0 bb 8f 40 00 00:07:47.798 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 40 00 00:07:47.798 READ LOG EXT
- 60 00 01 00 10 00 01 d1 c0 bb 8f 40 00 00:07:44.369 READ FPDMA QUEUED
- 60 00 01 00 08 00 01 d1 c0 bb 8e 40 00 00:07:44.368 READ FPDMA QUEUED
- Error 523 [18] occurred at disk power-on lifetime: 17982 hours (749 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 01 d1 c0 bb 8d 40 00 Error: UNC at LBA = 0x1d1c0bb8d = 7814036365
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 10 00 01 d1 c0 bb 8f 40 00 00:07:44.369 READ FPDMA QUEUED
- 60 00 01 00 08 00 01 d1 c0 bb 8e 40 00 00:07:44.368 READ FPDMA QUEUED
- 60 00 01 00 00 00 01 d1 c0 bb 8d 40 00 00:07:44.368 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 40 00 00:07:44.368 READ LOG EXT
- 60 00 01 00 18 00 01 d1 c0 bb 8c 40 00 00:07:40.939 READ FPDMA QUEUED
- Error 522 [17] occurred at disk power-on lifetime: 17982 hours (749 days + 6 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 01 d1 c0 bb 8c 40 00 Error: UNC at LBA = 0x1d1c0bb8c = 7814036364
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 01 00 18 00 01 d1 c0 bb 8c 40 00 00:07:40.939 READ FPDMA QUEUED
- 60 00 01 00 10 00 01 d1 c0 bb 8d 40 00 00:07:40.939 READ FPDMA QUEUED
- 60 00 01 00 08 00 01 d1 c0 bb 8e 40 00 00:07:40.939 READ FPDMA QUEUED
- 60 00 01 00 00 00 01 d1 c0 bb 8f 40 00 00:07:40.939 READ FPDMA QUEUED
- 2f 00 00 00 01 00 00 00 00 00 10 40 00 00:07:40.938 READ LOG EXT
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 16546 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- Device State: Active (0)
- Current Temperature: 30 Celsius
- Power Cycle Min/Max Temperature: 30/32 Celsius
- Lifetime Min/Max Temperature: 16/55 Celsius
- Under/Over Temperature Limit Count: 0/0
- Vendor specific:
- 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (452)
- Index Estimated Time Temperature Celsius
- 453 2022-04-01 20:31 31 ************
- ... ..( 51 skipped). .. ************
- 27 2022-04-01 21:23 31 ************
- 28 2022-04-01 21:24 30 ***********
- ... ..(302 skipped). .. ***********
- 331 2022-04-02 02:27 30 ***********
- 332 2022-04-02 02:28 ? -
- 333 2022-04-02 02:29 30 ***********
- ... ..( 12 skipped). .. ***********
- 346 2022-04-02 02:42 30 ***********
- 347 2022-04-02 02:43 31 ************
- ... ..(104 skipped). .. ************
- 452 2022-04-02 04:28 31 ************
- SCT Error Recovery Control command not supported
- Device Statistics (GP/SMART Log 0x04) not supported
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 35 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 36 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 56753 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement