Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Runet BETONexpress 2012
- This is the full cracked version of the software. Download, extract, install, enjoy.
- Inside the archive there is "crack" folder wich contains everything you need to crack the software.
- Download link:
- http://filemates.com/lbw0oy0o1tte/Runet.BETONexpress.2012.cracked.rar
- With BETONexpress you can easily design structural elements of reinforced concrete. For each structural element, you specify the basic dimensions, loads and material properties, and you obtain the detailed concrete design in ultimate limit state (ULS), and in serviceability limit state (SLS).
- The dimensioning is according to Eurocode 2, EN 1992-1-1:2004, Design of concrete structures, General rules and rules for buildings,with supplement of Eurocode 7, EN 1997-1:2004, Geotechnical design – General rules, for geotechnical analysis (footings, retaining walls), Eurocode 0, EN 1990:2002, for load combinations, and Eurocode 8 for seismic loading.
- The last EN versions of the Eurocodes are implemented.You can comute also the capacity of slab, beams and column strengthened with FRP (fibre-reinforced polymers). Regular and light weight aggregate concrete included.
- The program's CAD modulus automatic generates detailed drawings of the structure and the reinforcement. A combined detailed report and reinforcing steel schedule is produced for the designed concrete components. Assumptions and references to design codes are shown in the report. The reinforcing steel schedule can be edited with a specialised editor which is included. The user can select the applicable National Annex. The design code parameters, as well as default values, can be adjusted by the user. Design Charts and Tables for use and understanding of Eurocode 2 are included n the program. In addition a set of engineering tools (unit conversion, computation of areas, moments of inertia, standard steel sections etc.) are included in the program.
- View more types of concrete slabs Slabs
- Solid slabs and ribbed slabs.
- Uniformly distributed dead and live loading. Load combinations according to Eurocode 0.
- Two way slabs with various support conditions. Czerny, Bares or Marcus solution methods.
- One-way continuous slabs (up to eight 8 spans). End cantilevers can be specified. Load factors for every span. Moment redistribution.
- Cantilever slabs.
- Crack and deflection control. New
- Regral anf Light weight concrete.New
- Moment capacity of concrete slab cross-sections and sections strengthened with FRP (fibre-reinforced polymers).
- View more types of beams View more types of beams Beams
- Beams of rectangular or T section in combined loading bending shear and axial force.
- Beams of one span under combined loading.
- Continuous beams (up to 8 spans) under uniformly distributed loading, combined loading bending, shear and torsion.
- Crack and deflection control. New
- Regral anf Light weight concrete.New
- Computation of moment capacity of concrete beam cross-sections and sections strengthened with FRP (fibre-reinforced polymers).
- View more types of columns View more types of columns Columns
- Biaxial bending, (rectangular and round section) isolated column (stability control). Second order effects.
- Biaxial bending (N-Mx-My) diagrams obtained by numerical integration of concrete and steel forces over the cross-section.
- Computation of moment capacity of concrete column cross-sections and sections strengthened with FRP (fibre-reinforced polymers).
- Complete Charts for simple and double bending.
- New
- View more types of spread footings
- Drawings of Fundament View more types of spread footings Spread footings
- Centrically loaded footings.
- Eccentrically loaded footings, and eccentric footings.
- Vertical loading and moments at the top. Dead and live loading.
- Exact computation of pressure distribution under the footing. Geotechnical design using Eurocode 7, EN 1997-1:2004, or allowable soil stress.
- Load combinations according to Eurocode 7 (EQU, STR, GEO load cases) , and Eurocode 0.
- footpressdistr.gif (1947 bytes)
- Full CAD drawing of footings with reinforcement.
- View more types of Retaining walls
- Automatic generation of drawings
- View more types of Retaining walls Retaining walls
- Retaining walls of gravity or cantilever type (reinforced). Geotechnical design using Eurocode 7, EN 1997-1:2004, Geotechnical design – General rules or allowable soil stress. Active and passive earth pressure using Coulomb's theory. Design of gravity walls using Eurocode 6 (EC6) or allowable stresses.
- Earthquake analysis according to Eurocode 8 (EC8), Mononobe-Okabe.
- Two different types of cantilever walls exist in the program:
- Type-A. Walls with very small back heel. The active earth pressure is computed using Coulomb's theory at the back face of the wall.
- Type B. Walls with back heel. The active earth pressure is computed using Rankine's theory at a vertical surface at the end of the heel.
- The design of cantilever type walls is based on Ultimate Limit State Design of concrete according to Eurocode 2. The design checks are performed at each tenth of the stem height. The reinforcement of the stem is optimised, and depending on the stem height the reinforcement is reduced toward the top of the wall. The reinforcing bars are automatically placed in the reinforcing bar schedules. Optional Base key against sliding.
- Load combinations according to Eurocode 2, Eurocode 7,(EQU, STR, GEO load cases) and Eurocode 0.
- Full CAD drawing of retaining walls with reinforcement.
- Corbel/Brackets Corbels - Brackets
- Short cantilevers projecting from column faces, with ac/hc<=1, where ac the load lever arm and hc the corbel height. Design according to Eurocode 2 §2.5.3.7. Load combinations according to Eurocode 2 and Eurocode 1.
- Full CAD drawing of corbels with reinforcement.
- Deep beams Deep beams
- Deep beams with dimensions Leff/h<=2, where Leff length and h height.
- Design according to Eurocode 2, §5.6.4,§6.5, using simple strut and tie model. You can design deep beams subjected to uniformly distributed load (with dead and live components) at the top and bottom faces of the beam.
- Load combinations according to Eurocode 2, and Eurocode 0.
- Full CAD drawing of deep beams with reinforcement.
- Reinforced concrete design charts
- New
- Tables and Design charts with Eurocode 2 as: Kd , med w, effective length
- Design charts for column design single and double bending.
- Design charts for deflection control
- graph 02.gif (32242 bytes) Grap4.gif (36080 bytes)
- Edit steelbar schedule Steelbar Schedule
- Detailed steelbar schedule. You can modify and update the steelbar schedule simply with an editor, with ready steelbar menus.
- The report and the steel schedules can also be exported to PDF and WORD files.
- print preview
- Preview and print Report
- Full report preview. The reports are very analytical, showing all the computations, graphics, with references to the design code paragraphs. The computational errors, or inadequate dimensioning, are shown in red.
- Export of all reports to PDF or Word format.
- Export of all CAD drawings to PDF or DXF(Autocad) format.
- National Annexes-Parameters-Design Rules
- You can select the National Annex. (Auto matically set with the language)..
- The code parameters, as well as default values can be adjusted by the user.
- ahelp.gif (1278 bytes) On line help
- A complete on line help assist the user for the required data, as well as references to the corresponding code subjects, as well as theoretical overview.
- Users manual included in PFD and DOC format.
- BETONexpress Help
- Section properties
- Engineering tools
- Unit conversion
- Area calculations
- Section of properties
- Calculation Rolled steel shapes
- Reinforcement tools
- Anchorage lengths
- Earth pressure coefficients
Add Comment
Please, Sign In to add comment