Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2019.10-armbian (Apr 14 2020 - 13:33:45 +0800)
- DRAM: 4096 MiB
- Trying to boot from MMC1
- NOTICE: BL31: v2.2():1a63443-dirty
- NOTICE: BL31: Built : 13:33:32, Apr 14 2020
- NOTICE: BL31: Detected Allwinner H6 SoC (1728)
- NOTICE: BL31: Found U-Boot DTB at 0xc084300, model: Pine H64
- INFO: ARM GICv2 driver initialized
- INFO: PMIC: Probing AXP805 on I2C
- INFO: PMIC: aldo1 voltage: 3.300V
- INFO: PMIC: aldo2 voltage: 3.300V
- INFO: PMIC: aldo3 voltage: 3.300V
- INFO: PMIC: bldo1 voltage: 1.800V
- INFO: PMIC: bldo2 voltage: 1.800V
- INFO: PMIC: bldo3 voltage: 1.800V
- INFO: PMIC: cldo1 voltage: 3.300V
- INFO: PMIC: dcdcd voltage: 0.960V
- INFO: PMIC: dcdce voltage: 1.200V
- INFO: BL31: Platform setup done
- INFO: BL31: Initializing runtime services
- INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
- NOTICE: PSCI: System suspend is unavailable
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x4a000000
- INFO: SPSR = 0x3c9
- U-Boot 2019.10-armbian (Apr 14 2020 - 13:33:45 +0800) Allwinner Technology
- CPU: Allwinner H6 (SUN50I)
- Model: Pine H64
- DRAM: 3 GiB
- MMC: mmc@4020000: 0, mmc@4022000: 1
- Loading Environment from EXT4... ** File not found /boot/boot.env **
- ** Unable to read "/boot/boot.env" from mmc0:1 **
- In: serial@5000000
- Out: serial@5000000
- Err: serial@5000000
- Net: No ethernet found.
- starting USB...
- Bus usb@5101000: USB EHCI 1.00
- Bus usb@5101400: USB OHCI 1.0
- Bus usb@5311000: USB EHCI 1.00
- Bus usb@5311400: USB OHCI 1.0
- scanning bus usb@5101000 for devices... 1 USB Device(s) found
- scanning bus usb@5101400 for devices... 1 USB Device(s) found
- scanning bus usb@5311000 for devices... 1 USB Device(s) found
- scanning bus usb@5311400 for devices... 1 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 3033 bytes read in 4 ms (740.2 KiB/s)
- ## Executing script at 4fc00000
- U-boot loaded from SD
- Boot script loaded from mmc
- 116 bytes read in 4 ms (28.3 KiB/s)
- 33237 bytes read in 11 ms (2.9 MiB/s)
- 4161 bytes read in 10 ms (406.3 KiB/s)
- Applying kernel provided DT fixup script (sun50i-h6-fixup.scr)
- ## Executing script at 44000000
- 9830280 bytes read in 989 ms (9.5 MiB/s)
- 16422920 bytes read in 1650 ms (9.5 MiB/s)
- ## Loading init Ramdisk from Legacy Image at 4fe00000 ...
- Image Name: uInitrd
- Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
- Data Size: 9830216 Bytes = 9.4 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 4fa00000
- Booting using the fdt blob at 0x4fa00000
- EHCI failed to shut down host controller.
- Loading Ramdisk to 496a0000, end 49ffff48 ... OK
- Loading Device Tree to 000000004962f000, end 000000004969ffff ... OK
- Starting kernel ...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement