API tools faq
paste
Advertisement
eckdd

v-magine-console

eckdd
Sep 30th, 2016
6,080
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 78.59 KB | None | 0 0
raw download clone embed print report
  1.  
  2. PXELINUX 4.05 2011-12-09 Copyright (C) 1994-2011 H. Peter Anvin et al
  3. e%@)0(B[?25lAutomatic boot in 0 seconds... [?25hLoading vmlinuz.......
  4. Loading initrd.img.......................................ready.
  5. [ 0.000000] Initializing cgroup subsys cpuset
  6. [ 0.000000] Initializing cgroup subsys cpu
  7. [ 0.000000] Initializing cgroup subsys cpuacct
  8. [ 0.000000] Linux version 3.10.0-327.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-9) (GCC) ) #1 SMP Thu Nov 19 22:10:57 UTC 2015
  9. [ 0.000000] Command line: text console=tty0 console=ttyS0,115200n8 utf8 BOOTIF=fa:16:3e:60:b6:a4 consoleblank=0 initrd=initrd.img ro inst.ks=cdrom:/ks.cfg inst.repo=http://mirror.5ninesolutions.com/centos/7.2.1511/os/x86_64/ ksdevice=fa:16:3e:60:b6:a4 ramdisk_size=100000 BOOT_IMAGE=vmlinuz
  10. [ 0.000000] e820: BIOS-provided physical RAM map:
  11. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
  12. [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
  13. [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
  14. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000f7feffff] usable
  15. [ 0.000000] BIOS-e820: [mem 0x00000000f7ff0000-0x00000000f7ffefff] ACPI data
  16. [ 0.000000] BIOS-e820: [mem 0x00000000f7fff000-0x00000000f7ffffff] ACPI NVS
  17. [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000187ffffff] usable
  18. [ 0.000000] NX (Execute Disable) protection: active
  19. [ 0.000000] SMBIOS 2.3 present.
  20. [ 0.000000] Hypervisor detected: Microsoft HyperV
  21. [ 0.000000] HyperV: features 0x2e7f, hints 0xc2c
  22. [ 0.000000] HyperV: LAPIC Timer Frequency: 0x30d40
  23. [ 0.000000] tsc: Marking TSC unstable due to running on Hyper-V
  24. [ 0.000000] AGP: No AGP bridge found
  25. [ 0.000000] e820: last_pfn = 0x188000 max_arch_pfn = 0x400000000
  26. [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
  27. [ 0.000000] e820: last_pfn = 0xf7ff0 max_arch_pfn = 0x400000000
  28. [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
  29. [ 0.000000] Using GB pages for direct mapping
  30. [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
  31. [ 0.000000] init_memory_mapping: [mem 0x187e00000-0x187ffffff]
  32. [ 0.000000] init_memory_mapping: [mem 0x184000000-0x187dfffff]
  33. [ 0.000000] init_memory_mapping: [mem 0x180000000-0x183ffffff]
  34. [ 0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
  35. [ 0.000000] init_memory_mapping: [mem 0x00100000-0xf7feffff]
  36. [ 0.000000] RAMDISK: [mem 0x7db45000-0x7fffefff]
  37. [ 0.000000] ACPI: RSDP 00000000000f56f0 00014 (v00 ACPIAM)
  38. [ 0.000000] ACPI: RSDT 00000000f7ff0000 00040 (v01 VRTUAL MICROSFT 04001628 MSFT 00000097)
  39. [ 0.000000] ACPI: FACP 00000000f7ff0200 00081 (v02 VRTUAL MICROSFT 04001628 MSFT 00000097)
  40. [ 0.000000] ACPI: DSDT 00000000f7ff1724 033BE (v01 MSFTVM MSFTVM02 00000002 INTL 02002026)
  41. [ 0.000000] ACPI: FACS 00000000f7fff000 00040
  42. [ 0.000000] ACPI: WAET 00000000f7ff1480 00028 (v01 VRTUAL MICROSFT 04001628 MSFT 00000097)
  43. [ 0.000000] ACPI: SLIC 00000000f7ff14c0 00176 (v01 VRTUAL MICROSFT 04001628 MSFT 00000097)
  44. [ 0.000000] ACPI: OEM0 00000000f7ff16c0 00064 (v01 VRTUAL MICROSFT 04001628 MSFT 00000097)
  45. [ 0.000000] ACPI: SRAT 00000000f7ff0600 001D0 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001)
  46. [ 0.000000] ACPI: APIC 00000000f7ff0300 00252 (v01 VRTUAL MICROSFT 04001628 MSFT 00000097)
  47. [ 0.000000] ACPI: OEMB 00000000f7fff040 00064 (v01 VRTUAL MICROSFT 04001628 MSFT 00000097)
  48. [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
  49. [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
  50. [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
  51. [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
  52. [ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
  53. [ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
  54. [ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0
  55. [ 0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0
  56. [ 0.000000] SRAT: PXM 0 -> APIC 0x08 -> Node 0
  57. [ 0.000000] SRAT: PXM 0 -> APIC 0x09 -> Node 0
  58. [ 0.000000] SRAT: PXM 0 -> APIC 0x0a -> Node 0
  59. [ 0.000000] SRAT: PXM 0 -> APIC 0x0b -> Node 0
  60. [ 0.000000] SRAT: PXM 0 -> APIC 0x0c -> Node 0
  61. [ 0.000000] SRAT: PXM 0 -> APIC 0x0d -> Node 0
  62. [ 0.000000] SRAT: PXM 0 -> APIC 0x0e -> Node 0
  63. [ 0.000000] SRAT: PXM 0 -> APIC 0x0f -> Node 0
  64. [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0xf7ffffff] hotplug
  65. [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x187ffffff] hotplug
  66. [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x188200000-0xfdfffffff] hotplug
  67. [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x1000000000-0xffffffffff] hotplug
  68. [ 0.000000] NUMA: Node 0 [mem 0x00000000-0xf7ffffff] + [mem 0x100000000-0x187ffffff] -> [mem 0x00000000-0x187ffffff]
  69. [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x187ffffff]
  70. [ 0.000000] NODE_DATA [mem 0x187fd7000-0x187ffdfff]
  71. [ 0.000000] Zone ranges:
  72. [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
  73. [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
  74. [ 0.000000] Normal [mem 0x100000000-0x187ffffff]
  75. [ 0.000000] Movable zone start for each node
  76. [ 0.000000] Early memory node ranges
  77. [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
  78. [ 0.000000] node 0: [mem 0x00100000-0xf7feffff]
  79. [ 0.000000] node 0: [mem 0x100000000-0x187ffffff]
  80. [ 0.000000] ACPI: PM-Timer IO Port: 0x408
  81. [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  82. [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
  83. [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
  84. [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
  85. [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
  86. [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
  87. [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
  88. [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
  89. [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] enabled)
  90. [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] enabled)
  91. [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] enabled)
  92. [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] enabled)
  93. [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] enabled)
  94. [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] enabled)
  95. [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] enabled)
  96. [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] enabled)
  97. [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x10] disabled)
  98. [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x11] disabled)
  99. [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x12] disabled)
  100. [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x13] disabled)
  101. [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x14] disabled)
  102. [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x15] disabled)
  103. [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x16] disabled)
  104. [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x17] disabled)
  105. [ 0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x18] disabled)
  106. [ 0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x19] disabled)
  107. [ 0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1a] disabled)
  108. [ 0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1b] disabled)
  109. [ 0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1c] disabled)
  110. [ 0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1d] disabled)
  111. [ 0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1e] disabled)
  112. [ 0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x1f] disabled)
  113. [ 0.000000] ACPI: LAPIC (acpi_id[0x21] lapic_id[0x20] disabled)
  114. [ 0.000000] ACPI: LAPIC (acpi_id[0x22] lapic_id[0x21] disabled)
  115. [ 0.000000] ACPI: LAPIC (acpi_id[0x23] lapic_id[0x22] disabled)
  116. [ 0.000000] ACPI: LAPIC (acpi_id[0x24] lapic_id[0x23] disabled)
  117. [ 0.000000] ACPI: LAPIC (acpi_id[0x25] lapic_id[0x24] disabled)
  118. [ 0.000000] ACPI: LAPIC (acpi_id[0x26] lapic_id[0x25] disabled)
  119. [ 0.000000] ACPI: LAPIC (acpi_id[0x27] lapic_id[0x26] disabled)
  120. [ 0.000000] ACPI: LAPIC (acpi_id[0x28] lapic_id[0x27] disabled)
  121. [ 0.000000] ACPI: LAPIC (acpi_id[0x29] lapic_id[0x28] disabled)
  122. [ 0.000000] ACPI: LAPIC (acpi_id[0x2a] lapic_id[0x29] disabled)
  123. [ 0.000000] ACPI: LAPIC (acpi_id[0x2b] lapic_id[0x2a] disabled)
  124. [ 0.000000] ACPI: LAPIC (acpi_id[0x2c] lapic_id[0x2b] disabled)
  125. [ 0.000000] ACPI: LAPIC (acpi_id[0x2d] lapic_id[0x2c] disabled)
  126. [ 0.000000] ACPI: LAPIC (acpi_id[0x2e] lapic_id[0x2d] disabled)
  127. [ 0.000000] ACPI: LAPIC (acpi_id[0x2f] lapic_id[0x2e] disabled)
  128. [ 0.000000] ACPI: LAPIC (acpi_id[0x30] lapic_id[0x2f] disabled)
  129. [ 0.000000] ACPI: LAPIC (acpi_id[0x31] lapic_id[0x30] disabled)
  130. [ 0.000000] ACPI: LAPIC (acpi_id[0x32] lapic_id[0x31] disabled)
  131. [ 0.000000] ACPI: LAPIC (acpi_id[0x33] lapic_id[0x32] disabled)
  132. [ 0.000000] ACPI: LAPIC (acpi_id[0x34] lapic_id[0x33] disabled)
  133. [ 0.000000] ACPI: LAPIC (acpi_id[0x35] lapic_id[0x34] disabled)
  134. [ 0.000000] ACPI: LAPIC (acpi_id[0x36] lapic_id[0x35] disabled)
  135. [ 0.000000] ACPI: LAPIC (acpi_id[0x37] lapic_id[0x36] disabled)
  136. [ 0.000000] ACPI: LAPIC (acpi_id[0x38] lapic_id[0x37] disabled)
  137. [ 0.000000] ACPI: LAPIC (acpi_id[0x39] lapic_id[0x38] disabled)
  138. [ 0.000000] ACPI: LAPIC (acpi_id[0x3a] lapic_id[0x39] disabled)
  139. [ 0.000000] ACPI: LAPIC (acpi_id[0x3b] lapic_id[0x3a] disabled)
  140. [ 0.000000] ACPI: LAPIC (acpi_id[0x3c] lapic_id[0x3b] disabled)
  141. [ 0.000000] ACPI: LAPIC (acpi_id[0x3d] lapic_id[0x3c] disabled)
  142. [ 0.000000] ACPI: LAPIC (acpi_id[0x3e] lapic_id[0x3d] disabled)
  143. [ 0.000000] ACPI: LAPIC (acpi_id[0x3f] lapic_id[0x3e] disabled)
  144. [ 0.000000] ACPI: LAPIC (acpi_id[0x40] lapic_id[0x3f] disabled)
  145. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
  146. [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
  147. [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
  148. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  149. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  150. [ 0.000000] Using ACPI (MADT) for SMP configuration information
  151. [ 0.000000] smpboot: Allowing 64 CPUs, 48 hotplug CPUs
  152. [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
  153. [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
  154. [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
  155. [ 0.000000] PM: Registered nosave memory: [mem 0xf7ff0000-0xf7ffefff]
  156. [ 0.000000] PM: Registered nosave memory: [mem 0xf7fff000-0xf7ffffff]
  157. [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xffffffff]
  158. [ 0.000000] e820: [mem 0xf8000000-0xffffffff] available for PCI devices
  159. [ 0.000000] Booting paravirtualized kernel on bare hardware
  160. [ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:1
  161. [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff880180e00000 s87168 r8192 d31616 u131072
  162. [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1547641
  163. [ 0.000000] Policy zone: Normal
  164. [ 0.000000] Kernel command line: text console=tty0 console=ttyS0,115200n8 utf8 BOOTIF=fa:16:3e:60:b6:a4 consoleblank=0 initrd=initrd.img ro inst.ks=cdrom:/ks.cfg inst.repo=http://mirror.5ninesolutions.com/centos/7.2.1511/os/x86_64/ ksdevice=fa:16:3e:60:b6:a4 ramdisk_size=100000 BOOT_IMAGE=vmlinuz
  165. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  166. [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
  167. [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
  168. [ 0.000000] AGP: Checking aperture...
  169. [ 0.000000] AGP: No AGP bridge found
  170. [ 0.000000] Memory: 6065016k/6422528k available (6440k kernel code, 131528k absent, 225984k reserved, 4266k data, 1620k init)
  171. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=1
  172. [ 0.000000] Hierarchical RCU implementation.
  173. [ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=64.
  174. [ 0.000000] Offload RCU callbacks from all CPUs
  175. [ 0.000000] Offload RCU callbacks from CPUs: 0-63.
  176. [ 0.000000] NR_IRQS:327936 nr_irqs:936 0
  177. [ 0.000000] Console: colour VGA+ 80x25
  178. [ 0.000000] console [tty0] enabled
  179. [ 0.000000] console [ttyS0] enabled
  180. [ 0.000000] allocated 25165824 bytes of page_cgroup
  181. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  182. [ 0.000000] tsc: Fast TSC calibration failed
  183. [ 0.000000] tsc: Unable to calibrate against PIT
  184. [ 0.000000] tsc: using PMTIMER reference calibration
  185. [ 0.000000] tsc: Detected 2599.990 MHz processor
  186. [ 0.008044] Calibrating delay loop (skipped), value calculated using timer frequency.. 5199.98 BogoMIPS (lpj=2599990)
  187. [ 0.010059] pid_max: default: 65536 minimum: 512
  188. [ 0.012222] Security Framework initialized
  189. [ 0.014083] SELinux: Initializing.
  190. [ 0.018180] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  191. [ 0.025246] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  192. [ 0.028734] Mount-cache hash table entries: 4096
  193. [ 0.030347] Initializing cgroup subsys memory
  194. [ 0.031084] Initializing cgroup subsys devices
  195. [ 0.032058] Initializing cgroup subsys freezer
  196. [ 0.033059] Initializing cgroup subsys net_cls
  197. [ 0.034062] Initializing cgroup subsys blkio
  198. [ 0.035058] Initializing cgroup subsys perf_event
  199. [ 0.036073] Initializing cgroup subsys hugetlb
  200. [ 0.038140] CPU: Physical Processor ID: 0
  201. [ 0.039063] CPU: Processor Core ID: 0
  202. [ 0.041064] mce: CPU supports 1 MCE banks
  203. [ 0.042110] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
  204. [ 0.042110] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
  205. [ 0.042110] tlb_flushall_shift: 6
  206. [ 0.044117] Freeing SMP alternatives: 28k freed
  207. [ 0.060414] ACPI: Core revision 20130517
  208. [ 0.065668] ACPI: All ACPI Tables successfully acquired
  209. [ 0.068271] ftrace: allocating 24585 entries in 97 pages
  210. [ 0.110432] Switched APIC routing to physical flat.
  211. [ 0.238619] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  212. [ 0.239005] smpboot: CPU0: AMD Opteron(TM) Processor 6212 (fam: 15, model: 01, stepping: 02)
  213. [ 0.243377] Performance Events: Broken PMU hardware detected, using software events only.
  214. [ 0.245005] Failed to access perfctr msr (MSR c0010007 is 0)
  215. [ 0.249000] NMI watchdog: disabled (cpu0): hardware events not enabled
  216. [ 0.250007] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14[ 1.225216] calibrate_delay_direct() dropping max bogoMips estimate 1 = 3796499
  217. #15
  218. [ 1.407205] Brought up 16 CPUs
  219. [ 1.408005] smpboot: Total of 16 processors activated (83318.29 BogoMIPS)
  220. [ 1.426231] devtmpfs: initialized
  221. [ 1.434617] EVM: security.selinux
  222. [ 1.435004] EVM: security.ima
  223. [ 1.436005] EVM: security.capability
  224. [ 1.438101] PM: Registering ACPI NVS region [mem 0xf7fff000-0xf7ffffff] (4096 bytes)
  225. [ 1.442076] atomic64 test passed for x86-64 platform with CX8 and with SSE
  226. [ 1.443176] NET: Registered protocol family 16
  227. [ 1.448032] ACPI: bus type PCI registered
  228. [ 1.449004] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  229. [ 1.451032] PCI: Using configuration type 1 for base access
  230. [ 1.452011] PCI: Using configuration type 1 for extended access
  231. [ 1.459225] ACPI: Added _OSI(Module Device)
  232. [ 1.460009] ACPI: Added _OSI(Processor Device)
  233. [ 1.461003] ACPI: Added _OSI(3.0 _SCP Extensions)
  234. [ 1.462011] ACPI: Added _OSI(Processor Aggregator Device)
  235. [ 1.476299] ACPI: Interpreter enabled
  236. [ 1.477017] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
  237. [ 1.480010] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
  238. [ 1.483010] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
  239. [ 1.486011] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130517/hwxface-571)
  240. [ 1.489022] ACPI: (supports S0 S5)
  241. [ 1.490007] ACPI: Using IOAPIC for interrupt routing
  242. [ 1.492014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  243. [ 1.593277] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  244. [ 1.594013] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  245. [ 1.595016] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
  246. [ 1.596524] PCI host bridge to bus 0000:00
  247. [ 1.597014] pci_bus 0000:00: root bus resource [bus 00-ff]
  248. [ 1.598009] pci_bus 0000:00: root bus resource [mem 0xfe0000000-0xfffffffff]
  249. [ 1.599007] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
  250. [ 1.600026] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
  251. [ 1.601011] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
  252. [ 1.602008] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfffbffff]
  253. [ 1.617369] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
  254. [ 1.618021] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
  255. [ 1.619011] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
  256. [ 1.620007] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
  257. [ 1.622450] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
  258. [ 1.622450] * this clock source is slow. Consider trying other clock sources
  259. [ 1.626376] pci 0000:00:07.3: quirk: [io 0x0400-0x043f] claimed by PIIX4 ACPI
  260. [ 1.682636] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
  261. [ 1.696276] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  262. [ 1.713264] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  263. [ 1.729052] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
  264. [ 1.744448] ACPI: Enabled 1 GPEs in block 00 to 0F
  265. [ 1.745223] vgaarb: device added: PCI:0000:00:08.0,decodes=io+mem,owns=io+mem,locks=none
  266. [ 1.746005] vgaarb: loaded
  267. [ 1.747004] vgaarb: bridge control possible 0000:00:08.0
  268. [ 1.748188] SCSI subsystem initialized
  269. [ 1.749138] ACPI: bus type USB registered
  270. [ 1.750054] usbcore: registered new interface driver usbfs
  271. [ 1.751028] usbcore: registered new interface driver hub
  272. [ 1.753588] usbcore: registered new device driver usb
  273. [ 1.755501] PCI: Using ACPI for IRQ routing
  274. [ 1.758791] NetLabel: Initializing
  275. [ 1.759005] NetLabel: domain hash size = 128
  276. [ 1.760015] NetLabel: protocols = UNLABELED CIPSOv4
  277. [ 1.761041] NetLabel: unlabeled traffic allowed by default
  278. [ 1.762150] Switching to clocksource hyperv_clocksource
  279. [ 1.781854] pnp: PnP ACPI init
  280. [ 1.789296] ACPI: bus type PNP registered
  281. [ 1.833234] system 00:09: [io 0x01e0-0x01ef] has been reserved
  282. [ 1.843841] system 00:09: [io 0x0160-0x016f] has been reserved
  283. [ 1.854533] system 00:09: [io 0x0278-0x027f] has been reserved
  284. [ 1.865322] system 00:09: [io 0x0378-0x037f] has been reserved
  285. [ 1.877285] system 00:09: [io 0x0678-0x067f] has been reserved
  286. [ 1.889273] system 00:09: [io 0x0778-0x077f] has been reserved
  287. [ 1.901418] system 00:09: [io 0x04d0-0x04d1] has been reserved
  288. [ 1.913880] system 00:0a: [io 0x0400-0x043f] has been reserved
  289. [ 1.925840] system 00:0a: [io 0x0370-0x0371] has been reserved
  290. [ 1.937653] system 00:0a: [io 0x0440-0x044f] has been reserved
  291. [ 1.949368] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
  292. [ 1.962789] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
  293. [ 1.976205] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
  294. [ 1.992380] system 00:0b: [mem 0x000c0000-0x000dffff] could not be reserved
  295. [ 2.008976] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
  296. [ 2.023057] system 00:0b: [mem 0x00100000-0xf7ffffff] could not be reserved
  297. [ 2.036888] system 00:0b: [mem 0xfffc0000-0xffffffff] has been reserved
  298. [ 2.050804] pnp: PnP ACPI: found 12 devices
  299. [ 2.059782] ACPI: bus type PNP unregistered
  300. [ 2.086541] NET: Registered protocol family 2
  301. [ 2.096922] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  302. [ 2.111651] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  303. [ 2.125317] TCP: Hash tables configured (established 65536 bind 65536)
  304. [ 2.138202] TCP: reno registered
  305. [ 2.146736] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  306. [ 2.159357] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  307. [ 2.173502] NET: Registered protocol family 1
  308. [ 2.183111] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
  309. [ 2.269601] Unpacking initramfs...
  310. [ 11.020437] Freeing initrd memory: 37608k freed
  311. [ 11.047665] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
  312. [ 11.061103] software IO TLB [mem 0xf3ff0000-0xf7ff0000] (64MB) mapped at [ffff8800f3ff0000-ffff8800f7feffff]
  313. [ 11.087881] microcode: CPU0: patch_level=0xffffffff
  314. [ 11.098149] microcode: CPU1: patch_level=0xffffffff
  315. [ 11.108905] microcode: CPU2: patch_level=0xffffffff
  316. [ 11.119682] microcode: CPU3: patch_level=0xffffffff
  317. [ 11.130289] microcode: CPU4: patch_level=0xffffffff
  318. [ 11.143854] microcode: CPU5: patch_level=0xffffffff
  319. [ 11.155262] microcode: CPU6: patch_level=0xffffffff
  320. [ 11.161840] microcode: CPU7: patch_level=0xffffffff
  321. [ 11.172476] microcode: CPU8: patch_level=0xffffffff
  322. [ 11.179170] microcode: CPU9: patch_level=0xffffffff
  323. [ 11.185406] microcode: CPU10: patch_level=0xffffffff
  324. [ 11.196026] microcode: CPU11: patch_level=0xffffffff
  325. [ 11.202495] microcode: CPU12: patch_level=0xffffffff
  326. [ 11.214353] microcode: CPU13: patch_level=0xffffffff
  327. [ 11.220859] microcode: CPU14: patch_level=0xffffffff
  328. [ 11.234035] microcode: CPU15: patch_level=0xffffffff
  329. [ 11.240657] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
  330. [ 11.257956] sha1_ssse3: Using AVX optimized SHA-1 implementation
  331. [ 11.265900] sha256_ssse3: Using AVX optimized SHA-256 implementation
  332. [ 11.274951] futex hash table entries: 16384 (order: 8, 1048576 bytes)
  333. [ 11.283168] Initialise system trusted keyring
  334. [ 11.289532] audit: initializing netlink socket (disabled)
  335. [ 11.300549] type=2000 audit(1475231976.300:1): initialized
  336. [ 11.364174] HugeTLB registered 1 GB page size, pre-allocated 0 pages
  337. [ 11.372004] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  338. [ 11.383317] zpool: loaded
  339. [ 11.387305] zbud: loaded
  340. [ 11.391906] VFS: Disk quotas dquot_6.5.2
  341. [ 11.397501] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  342. [ 11.406130] msgmni has been set to 11919
  343. [ 11.411705] Key type big_key registered
  344. [ 11.506153] NET: Registered protocol family 38
  345. [ 11.514874] Key type asymmetric registered
  346. [ 11.520263] Asymmetric key parser 'x509' registered
  347. [ 11.526487] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  348. [ 11.536059] io scheduler noop registered
  349. [ 11.541269] io scheduler deadline registered (default)
  350. [ 11.547751] io scheduler cfq registered
  351. [ 11.555898] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  352. [ 11.567618] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  353. [ 11.581340] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
  354. [ 11.596030] ACPI: Power Button [PWRF]
  355. [ 11.605489] GHES: HEST is not enabled!
  356. [ 11.616992] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  357. [ 11.656666] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  358. [ 11.706056] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  359. [ 11.717776] Non-volatile memory driver v1.3
  360. [ 11.726963] Linux agpgart interface v0.103
  361. [ 11.736346] crash memory driver: version 1.1
  362. [ 11.745994] rdac: device handler registered
  363. [ 11.755898] hp_sw: device handler registered
  364. [ 11.765575] emc: device handler registered
  365. [ 11.774649] alua: device handler registered
  366. [ 11.784032] libphy: Fixed MDIO Bus: probed
  367. [ 11.793509] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  368. [ 11.806633] ehci-pci: EHCI PCI platform driver
  369. [ 11.816377] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  370. [ 11.828778] ohci-pci: OHCI PCI platform driver
  371. [ 11.838493] uhci_hcd: USB Universal Host Controller Interface driver
  372. [ 11.851604] usbcore: registered new interface driver usbserial
  373. [ 11.863630] usbcore: registered new interface driver usbserial_generic
  374. [ 11.876871] usbserial: USB Serial support registered for generic
  375. [ 11.889328] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
  376. [ 11.942186] serio: i8042 KBD port at 0x60,0x64 irq 1
  377. [ 11.952449] serio: i8042 AUX port at 0x60,0x64 irq 12
  378. [ 11.963516] mousedev: PS/2 mouse device common for all mice
  379. [ 11.972081] rtc_cmos 00:01: RTC can wake from S4
  380. [ 12.006894] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
  381. [ 12.008594] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
  382. [ 12.127740] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram
  383. [ 12.140621] cpuidle: using governor menu
  384. [ 12.151406] hidraw: raw HID events driver (C) Jiri Kosina
  385. [ 12.163189] usbcore: registered new interface driver usbhid
  386. [ 12.173091] usbhid: USB HID core driver
  387. [ 12.179729] drop_monitor: Initializing network drop monitor service
  388. [ 12.192324] TCP: cubic registered
  389. [ 12.200015] Initializing XFRM netlink socket
  390. [ 12.210557] NET: Registered protocol family 10
  391. [ 12.224367] NET: Registered protocol family 17
  392. [ 12.239125] Loading compiled-in X.509 certificates
  393. [ 12.245508] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
  394. [ 12.256948] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
  395. [ 12.276990] Loaded X.509 cert 'CentOS Linux kernel signing key: 79ad886a113ca0223526336c0f825b8a94296ab3'
  396. [ 12.295557] psmouse serio1: alps: Unknown ALPS touchpad: E7=12 00 64, EC=12 00 64
  397. [ 12.313665] registered taskstats version 1
  398. [ 12.327458] Key type trusted registered
  399. [ 12.342309] Key type encrypted registered
  400. [ 12.357743] IMA: No TPM chip found, activating TPM-bypass!
  401. [ 12.372278] rtc_cmos 00:01: setting system clock to 2016-09-30 10:39:42 UTC (1475231982)
  402. [ 12.399394] Freeing unused kernel memory: 1620k freed
  403. [ 12.430951] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  404. [ 12.462417] systemd[1]: Detected virtualization microsoft.
  405. [ 12.475482] systemd[1]: Detected architecture x86-64.
  406. [ 12.489926] systemd[1]: Running in initial RAM disk.
  407. [ 12.505214] psmouse serio1: trackpoint: failed to get extended button data
  408.  
  409. Welcome to CentOS Linux 7 (Core) dracut-033-359.el7 (Initramfs)!
  410.  
  411. [ 12.529012] systemd[1]: No hostname configured.
  412. [ 12.534290] systemd[1]: Set hostname to <localhost>.
  413. [ 12.540011] systemd[1]: Initializing machine ID from random generator.
  414. [ 12.666244] systemd[1]: Cannot add dependency job for unit multipathd.service, ignoring: Unit blk-availability.service failed to load: No such file or directory.
  415. [ OK ] Reached target Timers.
  416. [ 12.713404] systemd[1]: Reached target Timers.
  417. [ 12.726892] systemd[1]: Starting Timers.
  418. [ OK ] Reached target Local File Systems.
  419. [ 12.756107] systemd[1]: Reached target Local File Systems.
  420. [ 12.767890] systemd[1]: Starting Local File Systems.
  421. [ OK ] Reached target Encrypted Volumes.
  422. [ 12.798900] systemd[1]: Reached target Encrypted Volumes.
  423. [ 12.810351] systemd[1]: Starting Encrypted Volumes.
  424. [ OK ] Reached target Swap.
  425. [ 12.839782] systemd[1]: Reached target Swap.
  426. [ 12.849290] systemd[1]: Starting Swap.
  427. [ OK ] Created slice -.slice.
  428. [ 12.875794] systemd[1]: Created slice -.slice.
  429. [ 12.884675] systemd[1]: Starting -.slice.
  430. [ OK ] Listening on Journal Socket.
  431. [ 12.909850] systemd[1]: Listening on Journal Socket.
  432. [ 12.919484] systemd[1]: Starting Journal Socket.
  433. [ OK ] Listening on udev Control Socket.
  434. [ 12.950568] systemd[1]: Listening on udev Control Socket.
  435. [ 12.965702] systemd[1]: Starting udev Control Socket.
  436. [ OK ] Listening on udev Kernel Socket.
  437. [ 13.001666] systemd[1]: Listening on udev Kernel Socket.
  438. [ 13.016588] systemd[1]: Starting udev Kernel Socket.
  439. [ OK ] Created slice System Slice.
  440. [ 13.047939] systemd[1]: Created slice System Slice.
  441. [ 13.059479] systemd[1]: Starting System Slice.
  442. [ 13.071110] systemd[1]: Started Load Kernel Modules.
  443. [ 13.079147] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  444. Starting Create list of required st... nodes for the current kernel...
  445. [ 13.114953] systemd[1]: Starting Device-Mapper Multipath Device Controller...
  446. Starting Device-Mapper Multipath[ 13.218759] device-mapper: uevent: version 1.0.3
  447. Device Controller...
  448. [ 13.235725] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
  449. [ 13.253785] systemd[1]: Starting Journal Service...
  450. Starting Journal Service...
  451. [ 13.293211] systemd[1]: Starting Setup Virtual Console...
  452. Starting Setup Virtual Console...
  453. [ 13.331653] device-mapper: multipath: version 1.9.0 loaded
  454. [ OK ] Reached target lices.
  455. [ 13.369700] systemd[1]: Reached target Slices.
  456. [ 13.374990] systemd[1]: Starting Slices.
  457. [ 13.379878] systemd[1]: Started dracut ask for additional cmdline parameters.
  458. [ 13.389114] systemd[1]: Starting dracut cmdline hook...
  459. Starting dracut cmdline hook...
  460. [ 13.413582] systemd[1]: Starting Apply Kernel Variables...
  461. Starting Apply Kernel Va..
  462. [ OK ] Started Journal Service.
  463. [ 13.476573] systemd[1]: Started Journal Service.
  464. [ OK ] Started Create list of rd sta...ce nodes for the current kerne[ OK [0] Started Setup Virtual Console.
  465. [ OK ] Started Apply Kernel Variables.
  466. [ OK ] Started Device-Mapper Multipath Device Controller.
  467. Starting Create Static Device Nodes in /dev...
  468. [ OK ] Started Create Static Device Nodes in /dev.
  469. [ 13.667218] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
  470. [ 13.946483] dracut-cmdline[303]: Warning: 'ksdevice=<MAC>' is depplied BOOTIF takes precedence.
  471. [ OK ] Started dracut cmdline hook.
  472. Starting Open-iSCSI...
  473. [ 14.413298] Loading iSCSI transport class v2.0-870.
  474. Starting dracut pre-udev hook...
  475. [ OK ] Started Open-iSCSI.
  476. [ 14.495096] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  477. [ 14.530275] iscsi: registered transport (tcp)
  478. [ 14.676875] Floppy drive(s): fd0 is 1.44M
  479. [ 14.727847] FDC 0 is an 82078.
  480. [ 14.758217] No iBFT detected.
  481. [ 14.774760] md: raid0 personality registered for level 0
  482. [ 14.796613] md: raid1 personality registered for level 1
  483. [ 14.817272] async_tx: api initialized (async)
  484. [ 14.832294] xor: automatically using best checksumming function:
  485. [ 14.854060] avx : 4148.000 MB/sec
  486. [ 14.892073] raid6: sse2x1 gen() 1710 MB/s
  487. [ 14.919050] raid6: sse2x2 gen() 3390 MB/s
  488. [ 14.945046] raid6: sse2x4 gen() 4277 MB/s
  489. [ 14.954539] raid6: using algorithm sse2x4 gen() (4277 MB/s)
  490. [ 14.966183] raid6: using ssse3x2 recovery algorithm
  491. [ 15.001595] md: raid6 personality registered for level 6
  492. [ 15.012877] md: raid5 personality registered for level 5
  493. [ 15.024418] md: raid4 personality registered for level 4
  494. [ 15.069524] md: raid10 personality registered for level 10
  495. [ 15.137896] md: linear personality registered for level -1
  496. [ 15.208535] device-mapper: multipath round-robin: version 1.0.0 loaded
  497. [ 15.316320] RPC: Registered named UNIX socket transport module.
  498. [ 15.327220] RPC: Registered udp transport module.
  499. [ 15.336139] RPC: Registered tcp transport module.
  500. [ 15.345077] RPC: Registered tcp NFSv4.1 backchannel transport module.
  501. [ OK ] Started dracut re-udev hook.
  502. Starting udev Kernel Device Manager...
  503. [ OK ] Started udev Kernel Device Manager.
  504. Starting dracut pre-trigger hook...
  505. [ OK ] Started dracut pre-trigger hook.
  506. Starting udev Coldplug all Devices...
  507. [ OK ] Started udev Coldplug all Devices.
  508. Mounting Configuration File System...
  509. [ 16.231975] hv_vmbus: Hyper-V Host Build:14393-10.0-0-0.0; Vmbus version:3.0
  510. [ 16.248843] hv_vmbus: CPU offlining is not supported by hypervisor
  511. [ 16.286252] tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007)
  512. [ 16.294482] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
  513. Starting Show Plymouth Boot Screen...
  514.  
  515. Starting dracut initqueue hook...
  516.  
  517. [ OK ] Mounted Configuration File System.
  518.  
  519. [ 16.388591] hv_vmbus: registering driver hyperv_fb
  520. [ 16.392780] hyperv_fb: Screen resolution: 1152x864, Color depth: 32
  521. [ 16.470904] Console: switching to colour frame buffer device 144x54
  522. [ 16.485797] AES CTR mode by8 optimization enabled
  523. [ 16.510318] hrtimer: interrupt took 4070200 ns
  524. [ 16.542953] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
  525. [ OK ] Reached target System Initialization.
  526.  
  527. [ OK ] Listening on Open-iSCSI iscsiuio Socket.
  528.  
  529. [ OK ] Reached target Sockets.
  530.  
  531. [ OK ] Started Show Plymouth Boot Screen.
  532.  
  533. [ OK ] Reached target Paths.
  534.  
  535. [ OK ] Reached target Basic System.
  536.  
  537. [ 16.666856] alg: No test for crc32 (crc32-pclmul)
  538. [ 16.687076] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x01, buttons: 0/0
  539. [ 16.711008] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input2
  540. [ 20.601066] tulip0: EEPROM default media type 100baseTx-FDX
  541. [ 20.616466] tulip0: Index #0 - Media 100baseTx (#3) described by a 21140 non-MII (0) block
  542. [ 20.634652] tulip0: Index #1 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) block
  543. %G[ 20.656639] net eth0: Digital DS21140 Tulip rev 32 at MMIO 0xfebff000, fa:16:3e:97:3a:7d, IRQ 9
  544. %G[ 20.672782] ata_piix 0000:00:07.1: Hyper-V Virtual Machine detected, ATA device ignore set
  545. [ 20.708563] hv_vmbus: registering driver hv_storvsc
  546. [ 20.712208] scsi host0: ata_piix
  547. [ 20.713177] scsi host1: ata_piix
  548. [ 20.713298] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
  549. [ 20.713301] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
  550. [ 20.747006] scsi host2: storvsc_host_t
  551. [ 20.753639] scsi 2:0:0:0: Direct-Access Msft Virtual Disk 1.0 PQ: 0 ANSI: 5
  552. [ 20.759881] hv_vmbus: registering driver hyperv_keyboard
  553. [ 20.760698] hv_vmbus: registering driver hid_hyperv
  554. [ 20.770755] input: Microsoft Vmbus HID-compliant Mouse as /devices/virtual/input/input3
  555. [ 20.782222] hid-generic 0006:045E:0621.0001: input: <UNKNOWN> HID v0.01 Mouse [Microsoft Vmbus HID-compliant Mouse] on
  556. [ 20.782752] hv_vmbus: registering driver hv_netvsc
  557. [ 20.811854] hv_netvsc: hv_netvsc channel opened successfully
  558. [ 20.837702] sd 2:0:0:0: [sda] 125829120 512-byte logical blocks: (64.4 GB/60.0 GiB)
  559. [ 20.853166] sd 2:0:0:0: [sda] 4096-byte physical blocks
  560. [ 20.863970] sd 2:0:0:0: [sda] Write Protect is off
  561. [ 20.872865] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  562. [ 20.876960] ata1.01: ATAPI: Virtual CD, , max MWDMA2
  563. [ 20.882118] ata1.01: configured for MWDMA2
  564. [ 20.891141] scsi 0:0:1:0: CD-ROM Msft Virtual CD/ROM 1.0 PQ: 0 ANSI: 5
  565. [ 20.927163] sda: unknown partition table
  566. [ 20.937696] sd 2:0:0:0: [sda] Attached SCSI disk
  567. [ 20.987784] sr 0:0:1:0: [sr0] scsi3-mmc drive: 0x/0x tray
  568. [ 21.000607] cdrom: Uniform CD-ROM driver Revision: 3.20
  569. [ 36.860086] hv_netvsc vmbus_14: Send section size: 6144, Section count:2560
  570. [ 36.876518] hv_netvsc vmbus_14: Device MAC fa:16:3e:60:b6:a4 link state up
  571. [ 36.900120] hv_netvsc: hv_netvsc channel opened successfully
  572. [ 52.956625] hv_netvsc vmbus_15: Send section size: 6144, Section count:2560
  573. [ 52.973014] hv_netvsc vmbus_15: Device MAC fa:16:3e:23:18:c6 link state up
  574. [ 52.994946] hv_netvsc: hv_netvsc channel opened successfully
  575. [ 69.052366] hv_netvsc vmbus_16: Send section size: 6144, Section count:2560
  576. [ 69.069339] hv_netvsc vmbus_16: Device MAC fa:16:3e:b7:83:2c link state up
  577. [ 69.092201] hv_netvsc: hv_netvsc channel opened successfully
  578. [ 85.147292] hv_netvsc vmbus_17: Send section size: 6144, Section count:2560
  579. [ 85.162585] hv_netvsc vmbus_17: Device MAC fa:16:3e:f3:fc:0d link state up
  580. [ 85.182821] input: AT Translated Set 2 keyboard as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:08/VMBUS:01/vmbus_5/serio2/input/input4
  581. [ 92.186115] dracut-initqueue[769]: % Total % Received % Xferd Average Speed Time Time Time Current
  582.  
  583. [ 92.187166] dracut-initqueue[769]: Dload Upload Total Spent Left Speed
  584.  
  585. [ 114.512584] dracut-initqueue[769]: 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
  586. 0 279M 0 479k 0 0 588k 0 0:08:06 --:--:-- 0:08:06 58k
  587. 4 279M 4 12.2M 0 6927k 0 0:00:41 0:00:01 0:00:40 6926k
  588. 9 279M 9 25.9M 0 0 9392k 0 0:00:30 0:00:02 0:00:28 9391k
  589. 13 279M 13 37.8M 0 0 9.9M 0 0:00:28 0:00:03 0:00:25 9.9M
  590. 18 2 18 51.5M 0 0 10.7M 0 0:00:26 0:00:04 0:00:22 10.7M
  591. 21 279M 21 59.0M 0 0 10.1M 0 0:00:27 0:00:05 0:00:22 11.7M
  592. 25 279M 25 70.9M 0 0 10.4M 0 0:00:26 0:00:06 0:00:20 11.7M
  593. 30 279M 30 84.6M 0 0 10.8M 0 0:00:25 0:00:07 0:00:18 11.7M
  594. 35 279M 35 98.4M 0 0 11.1M 0 0:00:25 0:00:08 0:00:17 12.1M
  595. 40 279M 40 112M 0 0 11.4M 0 0:00:24 0:00:09 0:00:15 12.1M
  596. 45 279M 45 125M 0 0 11.6M 0 0:00:23 0:00:10 0:00:13 13.3M
  597. 49 279M 49 137M 0 0 11.6M 0 0:00:24 0:00:11 0:00:13 13.3M
  598. 54 279M 54 151M 0 0 11.8M 0 0:00:23 0:00:12 0:00:11 13.3M
  599. 59 279M 59 165M 0 0 11.9M 0 0:00:23 0:00:13 0:00:10 13.3M
  600. 63 279M 63 178M 0 0 12.0M 0 0:00:23 0:00:14 0:00:09 13.1M
  601. 68 279M 68 191M 0 0 12.1M 0 0:00:23 0:00:15 0:00:08 13.1M
  602. 73 279M 73 205M 0 0 12.2M 0 0:00:22 0:00:16 0:00:06 13.6M
  603. 78 279M 78 219M 0 0 12.3M 0 0:00:22 0:00:17 0:00:05 13.6M
  604. 83 279M 83 233M 0 0 12.3M 0 0:00:22 0:00:18 0:00:04 13.6M
  605. 88 279M 88 246M 0 0 12.4M 0 0:00:22 0:00:19 0:00:03 13.7M
  606. 92 279M 92 258M 0 0 12.4M 0 0:00:22 0:00:20 0:00:02 13.3M
  607. 97 279M 97 272M 0 0 12.4M 0 0:00:22 0:00:21 0:00:01 13.3M
  608. 100 279M 100 279M 0 0 12.5M 0 0:00:22 0:00:22 --:--:-- 13.3M
  609.  
  610. [ 115.313298] loop: module loaded
  611. [ OK ] Started dracut initqueue h
  612.  
  613. Startig dracut pre-mount hook...
  614.  
  615. [ OK ] Reached target Remote File Systems (Pre).
  616.  
  617. [ OK ] Reached target Remote File Systems.
  618.  
  619. [ OK ] Started dracut pre-mount hook.
  620.  
  621. [ OK ] Reached target Initrd Root File System.
  622.  
  623. Starting Reload Configuration from the Real Root...
  624.  
  625. [ OK ] Started Reload Configuration from the Real Root.
  626.  
  627. [ OK ] Reached target Initrd File Systems.
  628.  
  629. Starting dracut mount hook...
  630.  
  631. [ 115.920898] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
  632. [ OK ]racut mount hook.
  633.  
  634. [ OK  Reached target Initrd Default Target.
  635.  
  636. Starting dracut pre-pivot and cleanup hook...
  637.  
  638. [ OK ] Started dracut pre-pivot and cleanup hook.
  639.  
  640. Starting Cleaning Up and Shutting Down Daemons...
  641.  
  642. [ OK ] Stopped target Timers.
  643.  
  644. Starting Plymouth switch root service...
  645.  
  646. [ OK ] Stopped udev Kernel Device Manager.
  647.  
  648. [ OK ] Stopped Cleaning Up d Shutting Down Daemons.
  649.  
  650. [ OK ] Stopped dracut pre-pivot and cleanup hook.
  651.  
  652. Stopping dracut pre-pivot and cleanup hook...
  653.  
  654. [ OK ] Stopped target Remote File Systems.
  655.  
  656. [ OK ] Stopped target Remote File Systems (Pre).
  657.  
  658. [ OK ] Stopped target Initrd Default Target.
  659.  
  660. [ OK ] Stopped dracut mount hook.
  661.  
  662. Stopping dracut mount hook...
  663.  
  664. [ OK ] Stopped dracut pre-mount hook.
  665.  
  666. Stopping dracut pre-mount hook...
  667.  
  668. [ OK ] Stopped dracut initqueue hook.
  669.  
  670. Stopping dracut initqueue hook...
  671.  
  672. Stopping Open-iSCSI...
  673.  
  674. [ OK ] Stopped target Basic System.
  675.  
  676. [ OK ] Stopped target Sockets.
  677.  
  678. [ OK ] Closed Open-iSCSI iscsiuio Socket.
  679.  
  680. [ OK ] Stopped target Slices.
  681.  
  682. [ OK ] Stopped target Paths.
  683.  
  684. [ OK ] Stopped target System Initialization.
  685.  
  686. [ OK ] Stopped target Encrypted Volumes.
  687.  
  688. [ OK ] Stopped target Swap.
  689.  
  690. [ OK ] Stopped Apply Kernel Variables.
  691.  
  692. Stopping Apply Kernel Variables...
  693.  
  694. [ OK ] Stopped udev Coldplug all Devices.
  695.  
  696. Stopping udev Coldplug all Devices...
  697.  
  698. [ OK ] Stopped dracut pre-trigger hook.
  699.  
  700. Stopping dracut pre-trigger hook...
  701.  
  702. [ OK ] Stopped target Local File Systems.
  703.  
  704. [ OK ] Stopped udev Kernel Device Manager.
  705.  
  706. [ OK ] Stopped Create Static Device Nodes in /dev.
  707.  
  708. Stopping Create Static Device Nodes in /dev...
  709.  
  710. [ OK ] Stopped Create list of required sta...ce nodes for the current kernel.
  711.  
  712. Stopping Create list of required st... nodes for the current kernel...
  713.  
  714. [ OK ] Stopped dracut pre-udev hook.
  715.  
  716. Stopping dracut pre-udev hook...
  717.  
  718. [ OK ] Closed udev Kernel Socket.
  719.  
  720. [ OK ] Closed udev Control Starting udev Kernel Device Manager...
  721.  
  722. [ OK ] Started Plymouth switch root service.
  723.  
  724. [ OK ] Stopped Open-iSCSI.
  725.  
  726. [ OK ] Started udev Kernel Device Manager Starting Cleanup udevd DB...
  727.  
  728. Stopping Device-Mapper Multipath Device Controller...
  729.  
  730. [ OK ] Stopped dracut cmdline hook.
  731.  
  732. Stopping dracut cmdline hook...
  733.  
  734. [ OK ] Started Cleanup udevd DB.
  735.  
  736. [ OK ] Stopped Device-Mapper Multipath Device Controller.
  737.  
  738. [ OK ] Reached target Switch Root.
  739.  
  740. Starting Switch Root...
  741.  
  742. [ 120.241867] systemd-journald[296]: Received SIGTERM from PID 1 (systemd).
  743. [ 121.670858] type=1403 audit(1475232091.798:2): policy loaded auid=4294967295 ses=4294967295
  744. [ 121.700910] systemd[1]: Successfully loaded SELinux policy in 594.897ms.
  745. [ 122.014111] systemd[1]: Relabelled /dev and /run in 64.670ms.
  746.  
  747.  
  748. Welcome to CentOS Linux 7 (Core)!
  749.  
  750.  
  751.  
  752. [ 122.939199] systemd[1]: Cannot add dependency job for unit systemd-tmpfiles-clean.timer, ignoring: Unit systemd-tmpfiles-clean.timer is masked.
  753. [ 123.032619] systemd[1]: Stopped Switch Root.
  754. [ OK ] Stopped Switch Root.
  755.  
  756. [ 123.044387] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
  757. [ 123.044529] systemd[1]: systemd-udevd.service has no holdoff time, scheduling restart.
  758. [ OK ] Stopped udev Kernel Device Manager.
  759.  
  760. [ 123.078115] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  761. [ OK ] Set up automount Arbitrary Exe[ 123.097003] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
  762. cutab...ats File[ 123.100501] systemd[1]: Mounting Huge Pages File System...
  763. System Automount Point.
  764.  
  765. Mounting Huge Pages Fil[ 123.147776] systemd[1]: Listening on udev Kernel Socket.
  766. e System...
  767.  
  768. [[ 123.158185] systemd[1]: Starting udev Kernel Socket.
  769. [32m OK ] Listening on udev Kernel Socket.[ 123.160655] systemd[1]: Started Set Up Additional Binary Formats.
  770.  
  771.  
  772. [ 123.163071] systemd[1]: Mounting POSIX Message Queue File System...
  773. [ 123.202879] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  774. Mounti[ 123.220196] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  775. g POSIX Message Queue File System...
  776.  
  777. [ K ] Listeni[ 123.238170] systemd[1]: Starting Remount Root and Kernel File Systems...
  778. ng on /dev/initctl Compatibilit Named Pipe.
  779.  
  780. [ 0m][ 123.258227] systemd[1]: Starting Journal Service...
  781. Stopped Flush Journal to Persistent Storage.
  782.  
  783. Starting Remount Root and Kernel File Systems...
  784.  
  785. [ OK ] Stopped Journal Service.
  786.  
  787. Starting Journal Service...
  788.  
  789. [ 123.310896] systemd[1]: Started Load Kernel Modules.
  790. [ 123.326459] systemd[1]: Starting Device-Mapper Multipath Device Controller...
  791. Starting Device-Mapper Multipath Device Controller...
  792.  
  793. [ 123.377919] systemd[1]: Listening on LVM2 metadata daemon socket.
  794. [ OK [0] Listening on L[ 123.387982] systemd[1]: Starting LVM2 metadata daemon socket.
  795. VM2 metadata daemon socket.
  796.  
  797. [ 123.403318] systemd[1]: Reached target Swap.
  798. [ 123.403347] systemd[1]: Starting Swap.
  799. [ 123.405385] systemd[1]: Starting Apply Kernel Variables...
  800. [ 123.514593] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  801. [ OK [0] Reached target Swap.
  802.  
  803. Starting Apply Kernel Variables...
  804.  
  805. [ 123.529956] systemd[1]: Reached target Paths.
  806. [ 123.530001] systemd[1]: Starting Paths.
  807. [ 123.554457] systemd[1]: Listening on LVM2 poll daemon socket.
  808. [ OK ] Reached target Paths.
  809.  
  810. [[ 123.570680] systemd[1]: Starting LVM2 poll daemon socket.
  811. OK ] Listening on LVM2 poll daemon socket.
  812.  
  813. [ OK ] Reached target Timers.
  814.  
  815. Mounting Debug File System...
  816.  
  817. [ OK ] Created slice User and Session Slice.
  818.  
  819. [ OK ] Reached target Slices.
  820.  
  821. Starting Create list of required st... nodes for the current kernel...
  822.  
  823. [ OK ] Listening on Delayed Shutdown Socket.
  824.  
  825. [ OK ] Stopped target Switch Root.
  826.  
  827. [ OK ] Stopped target Initrd Root File System.
  828.  
  829. [ OK ] Stopped target Initrd File Systems.
  830.  
  831. Mounting Temporary Directory...
  832.  
  833. [ OK ] Listening on udev Control Socket.
  834.  
  835. [ OK ] Created slice system-anaconda\x2dtmux.slice.
  836.  
  837. [ OK ] Mounted Huge Pages File System.
  838.  
  839. [ OK ] Mounted PO Message Queue File System.
  840.  
  841. [ OK ] Mounted Deble System.
  842.  
  843. [ OK ] Mounted Temporary Directory.
  844.  
  845. [ OK ] Started Journal Service.
  846.  
  847. [ OK ] Started Remount Root and Kernel File Systems.
  848.  
  849. [ OK ] Started Apply Kernel Variables.
  850.  
  851. [ OK ] Started Create list of required sta..s for the current kernel.
  852.  
  853. Starting Create Static Device Nodes in /dev...
  854.  
  855. Starting Load/Save Random Seed...
  856.  
  857. Starting Configure read-only root support...
  858.  
  859. Starting Rebuild Hardware Database...
  860.  
  861. Starting Rebuild Dynamic Linker Cache...
  862.  
  863. Starting Flush Journal to Persistent Storage...
  864.  
  865. [ OK ] Started Load/Save Random Seed.
  866.  
  867. [ OK ] Started Flush Journal to Persistent Storage.
  868.  
  869. [ OK ] Started Configure read-only root support.
  870.  
  871. [ OK ] Startereate Static Device odes in /dev.
  872.  
  873. Starting udev Kernel Device Manager...
  874.  
  875. [ OK ] Reached target Local File Systems (Pre).
  876.  
  877. [ OK ] Started Device-Mapper Multipath Device Controller.
  878.  
  879. [ OK ] Started udev Kernel Device Manager.
  880.  
  881. [ OK ] Started Rebuild Hardware Database.
  882.  
  883. Starting udev Call Devices...
  884.  
  885. [ OK ] Started udev Coldplug all Devices.
  886.  
  887. Starting udev Wait for Complete Device Initialization...
  888.  
  889. %G%G[ OK ] Started udev Wait for Complete Devization.
  890.  
  891. Starting Activation of DM RAID sets...
  892.  
  893. [ OK ] Started Activation of DM RAID sets.
  894.  
  895. [ OK ] Reached target Encrypted Volumes.
  896.  
  897. [ OK ] Reached target Local File Systems.
  898.  
  899. Starting Rebuild Journal Catalog...
  900.  
  901. Starting Import network configuration from initramfs...
  902.  
  903. Starting Tell Plymouth To Write Out Runtime Data...
  904.  
  905. [ OK ] Started Tell Plymouth To Write Out Runtime Data.
  906.  
  907. [ OK ] Started Rebuild Journal Catalog.
  908.  
  909. [ OK ] Started Import network configuration from initramfs.
  910.  
  911. Starting Create Volatile Files and Directories...
  912.  
  913. [ OK ] Started Create Volatile Files and Directories.
  914.  
  915. Starting Update UTMP about System Boot/Shutdown...
  916.  
  917. [ OK ] Started Update UTMP about System Boot/Shutdown.
  918.  
  919. [ OK ] Started Rebuild Dynamic Linker Cache.
  920.  
  921. Starting Update is Completed...
  922.  
  923. [ OK ] Started Update is Completed.
  924.  
  925. [ OK ] Reached target System Initialization.
  926.  
  927. [ OK ] Listening on Open-iSCSI iscsid Socket.
  928.  
  929. [ OK ] Listening on D-Bus System Message Bus Socket.
  930.  
  931. OK ] Listening on Open-iSCSI iscsiuio Socket.
  932.  
  933. [ OK ] ReSockets.
  934.  
  935. [[32] Reached target Basic System.
  936.  
  937. Starting firewalld - dynamic firewall daemon...
  938.  
  939. Starting Dump dmesg to /var/log/dmesg...
  940.  
  941. Starting Wait for Plymouth Boot Screen to Quit...
  942.  
  943. Starting Terminate Plymouth Boot Screen...
  944.  
  945. Startingvice...
  946.  
  947. Starting System Logging Service...
  948.  
  949. [ OK ] Started Anaconda NetworkManager configuration.
  950.  
  951. Starting Anaconda NetworkManager configuration...
  952.  
  953. Starting Service enabling compressing RAM with zRam...
  954.  
  955. %G
  956. (BStarting installer, one moment...
  957. 
  958. 
  959. 
  960. 
  961. 
  962. 
  963. 
  964. 
  965. 
  966. 
  967. 
  968. 
  969. 
  970. 
  971. 
  972. 
  973. 
  974. 
  975. 
  976. 
  977. 
  978. 
  979. [anaconda] 1:main* 2:shell 3:log 4:storage-log 5:program-log (B
  980. onda] 1:main* 2:shell 3:log 4:storage-lo> Switch tab: Alt+Tab| Help: F1 (B
  981. anaconda 21.48.22.56-1 for CentOS 7 started.
  982. * installation log files are stored in /tmp during the installation * shell is available on TTY2
  983. * when reporting a bug add logs tmp as separatetext/plain attachments20:41:59 Not asking for VNC because of an automated install20:41:59 Not asking for VNC because text mode was explicitly asked for in kickstartStarting automated install.....
  984. erating updated storage configurationhecking storage configuration...================================================================================================================================================================Installation 1) [x] Language settings 2) [x] Timezone settings
  985. (English (United States)) (Europe/Bucharest timezone)
  986. 3) [x] Installation source 4) [x] Software selection
  987. (http://mirror.5ninesolutions.c (Custom software selected) om/centos/7.2.1511/os/x86_64/) 6) [x] Kdump
  988. 5) [x] Installation Destination (Kdump is enabled)
  989. (Automatic partitioning selecte 8) [ ] User creation
  990. d) (No user will be created)
  991. 7) [x] Network configuration
  992. (Wired (eth0) connected)
  993. ================================================================================
  994. ================================================================================
  995. Progress
  996. Setting up the installation environment
  997. .
  998. Creating disklabel on /dev/sda
  999. .
  1000. Creating xfs on /dev/sda1
  1001. .
  1002. Creating lvmpv on /dev/sda2
  1003. .
  1004. Creating swap on /dev/mapper/centos_rdo-swap
  1005. .
  1006. Creating xfs on /dev/mapper/centos_rdo-home
  1007. .
  1008. Creating xfs on /dev/mapper/centos_rdo-root
  1009. .
  1010. Starting package installation process
  1011. Preparing transaction from installation source
  1012. Installing libgcc (1/300)
  1013. Installing centos-release (2/300)
  1014. Installing setp (3/300)
  1015. Installing filesystem (4/300)
  1016. Installing basesystem (5/300)
  1017. Installing kbd-misc (6/300)
  1018. Installing ncurses-base (7/300)
  1019. Installing linux-firmware (8/300)
  1020. Installing tzdata (9/300)
  1021. Installing nss-softokn-freebl (10/300)
  1022. Installing glibc-common (11/300)
  1023. Installing glibc (12/300)
  1024. Installing xz-libs (13/300)
  1025. Installing libstdc++ (14/300)
  1026. Installing ncurses-libs (15/300)
  1027. Installing bash (16/300)
  1028. Installing libsepol (17/300)
  1029. Installing pcre (18/300)
  1030. Installing libselinux (19/300)
  1031. Installing zlib (20/300)
  1032. Installing inf (21/300)
  1033. Installing audit-libs (22/300)
  1034. Installing libuuid (23/300)
  1035. Installing sed (24/300)
  1036. Installing nspr (25/300)
  1037. Installing libcom_err (26/300)
  1038. Installing popt (27/300)
  1039. Installing chkconfig (28/300)
  1040. Installing nss-util (29/300)
  1041. Installing libdb (30/300)
  1042. Installing grep (31/300)
  1043. Installing bzip2-libs (32/300)
  1044. Installing dbus-libs (33/300)
  1045. Installing readline (34/300)
  1046. Installing gawk (35/300)
  1047. Installing elfutils-libelf (36/300)
  1048. Installing libgpg-error (37/300)
  1049. Installing libffi (38/300)
  1050. Installing libattr (39/300)
  1051. Installing libacl (40/300)
  1052. Installing libcap (41/300)
  1053. Installing libgcrypt (42/300)
  1054. Installing cpio (43/300)
  1055. Installing libxml2 (44/300)
  1056. Installing libnl3 (45/300)
  1057. Installing expat (46/300)
  1058. Installing p11-kit (47/300)
  1059. Installing elfutils-libs (48/300)
  1060. Installing sqlite (49/300)
  1061. Installing lua (50/300)
  1062. Installing libidn (51/300)
  1063. Installing diffutils (52/300)
  1064. Installing findutils (53/300)
  1065. Installing libcap-ng (54/300)
  1066. Installing file-libs (55/300)
  1067. Installing gmp (56/300)
  1068. Installing file (57/300)
  1069. Installing nss-softokn (58/300)
  1070. Installing libnl3-cli (59/300)
  1071. Installing libassuan (60/300)
  1072. Installing cyrus-sasl-lib (61/300)
  1073. Installing e2fsprogs-libs (62/300)
  1074. Installing groff-base (63/300)
  1075. Installing which (64/300)
  1076. Installing libgomp (65/300)
  1077. Installing libunistring (66/300)
  1078. Installing xz (67/300)
  1079. Installing libnfnetlink (68/300)
  1080. Installing slang (69/300)
  1081. Installing newt (70/300)
  1082. Installing sysvinit-tools (71/300)
  1083. Installing lzo (72/300)
  1084. Installing tcp_wrappers-libs (73/300)
  1085. Installing libdaemon (74/300)
  1086. Installing ethtool (75/300)
  1087. Installing hostname (76/300)
  1088. Installing pciutils-libs (77/300)
  1089. Installing keyutils-libs (78/300)
  1090. Installing libtasn1 (79/300)
  1091. Installing p11-kit-trust (80/300)
  1092. Installing gdbm (81/300)
  1093. Installing less (82/300)
  1094. Installing cyrus-sasl-lib (61/300)
  1095. Installing e2fsprogs-libs (62/300)
  1096. Installing groff-base (63/300)
  1097. Installing which (64/300)
  1098. Installing libgomp (65/300)
  1099. Installing libunistring (66/300)
  1100. Installing xz (67/300)
  1101. Installing libnfnetlink (68/300)
  1102. Installing slang (69/300)
  1103. Installing newt (70/300)
  1104. Installing sysvinit-tools (71/300)
  1105. Installing lzo (72/300)
  1106. Installing tcp_wrappers-libs (73/300)
  1107. Installing libdaemon (74/300)
  1108. Installing ethtool (75/300)
  1109. Installing hostname (76/300)
  1110. Installing pciutils-libs (77/300)
  1111. Installing keyutils-libs (78/300)
  1112. Installing libtasn1 (79/300)
  1113. Installing p11-kit-trust (80/300)
  1114. Installing gdbm (81/300)
  1115. Installing less (82/300)
  1116. Installing libteam (83/300)
  1117. Installing nettle (84/300)
  1118. Installing glib2 (85/300)
  1119. Installing pkgconfig (86/300)
  1120. Installing shared-mime-info (87/300)
  1121. Installing dbus-glib (88/300)
  1122. Installing libcroco (89/300)
  1123. Installing gettext-libs (90/300)
  1124. Installing gobject-introspection (91/300)
  1125. Installing gsettings-desktop-schemas (92/300)
  1126. Installing vim-minimal (93/300)
  1127. Installing acl (94/300)
  1128. Installing avahi-libs (95/300)
  1129. Installing libdb-utils (96/300)
  1130. Installing pinentry (97/300)
  1131. Installing libss (98/300)
  1132. Installing mozjs17 (99/300)
  1133. Installing make (100/300)
  1134. Installing kmod-libs (101/300)
  1135. Installing libselinux-utils (102/300)
  1136. Installing freetype (103/300)
  1137. Installing libedit (104/300)
  1138. Installing ncurses (105/300)
  1139. Installing libmodman (106/300)
  1140. Installing libproxy (107/300)
  1141. Installing snappy (108/300)
  1142. Installing libpcap (109/300)
  1143. Installing ustr (110/300)
  1144. Installing libsemanage (111/300)
  1145. Installing libverto (112/300)
  1146. Installing krb5-libs (113/300)
  1147. Installing openssl-libs (114/300)
  1148. Installing coreutils (115/300)
  1149. Installing ca-certificates (116/30HInstalling shadow-utils (117/300)
  1150. Installing libblkid (118/300)
  1151. Installing python-libs (119/300)
  1152. Installing python (120/300)
  1153. Installing gzip (121/300)
  1154. Installing cracklib (122/300)
  1155. Installing python-decorator (123/300)
  1156. Installing dbus-python (124/300)
  1157. Installing cracklib-dicts (125/300)
  1158. Installing pam (126/300)
  1159. Installing libpwquality (127/300)
  1160. Installing systemd-libs (128/300)
  1161. Installing libgudev1 (129/300)
  1162. Installing procps-ng (130/300)
  1163. Installing gettext (131/300)
  1164. Installing pygobject3-base (132/300)
  1165. Installing libmount (133/300)
  1166. Installing centos-logos (134/300)
  1167. Installing plymouth-core-libs (135/300)
  1168. Installing libselinux-python (136/300)
  1169. Installing python-slip (137/300)
  1170. Installing python-slip-dbus (138/300)
  1171. Installing python-iniparse (139/300)
  1172. HInstalling python-pyudev (140/300)
  1173. Installing python-configobj (141/300)
  1174. Installing newt-python (142/300)
  1175. Installing yum-metadata-parser (143/300)
  1176. Installing pyliblzma (144/300)
  1177. Installing pyxattr (145/300)
  1178. Installing python-perf (146/300)
  1179. Installing grubby (147/300)
  1180. Installing avahi-autoipd (148/300)
  1181. Installing libutempter (149/300)
  1182. Installing nss-sysinit (150/300)
  1183. Installing nss (151/300)
  1184. Installing NetworkManager-libnm (152/300)
  1185. Installing nss-tools (153/300)
  1186. Installing openssl (154/300)
  1187. Installing logrotate (155/300)
  1188. Installing alsa-lib (156/300)
  1189. Installing binutils (157/300)
  1190. Installing mariadb-0)
  1191. Installing fipscheck-lib (159/300)
  1192. Installing fipscheck (160/300)
  1193. Installing libssh2 (161/300)
  1194. Installing libcurl (162/300)
  1195. Installing curl (163/300)
  1196. Installing rpm-libs (164/300)
  1197. Installing rpm (165/300)
  1198. Installing openldap (166/300)
  1199. Installing libuser (167/300)
  1200. Installing util-linux (168/300)
  1201. Installing policycoreutils (169/300)
  1202. Installing openssh (170/300)
  1203. Installing dhcp-libs (171/300)
  1204. Installing dhcp-common (172/300)
  1205. Installing selinux-policy (173/300)
  1206. Installing python-pycurl (174/300)
  1207. Installing python-urlgrabber (175/300)
  1208. Installing lsscsi (176/300)
  1209. Installing hardlink (177/300)
  1210. Installing pth (178/300)
  1211. Installing gnupg2 (179/300)
  1212. Installing gpgme (180/300)
  1213. Installing pygpgme (181/300)
  1214. Installing rpm-build-libs (182/300)
  1215. Installing rpm-python (183/300)
  1216. Installing yum-plugin-fastestmirror (184/300)
  1217. Installing yum (185/300)
  1218. Installing libmnl (186/300)
  1219. Installing libnetfilter_conntrack (187/300)
  1220. Installing iptables (188/300)
  1221. Installing iproute (189/300)
  1222. Installing qrencode-libs (190/300)
  1223. Installing kpartx (191/300)
  1224. Installing device-mapper (192/300)
  1225. Installing device-mapper-libs (193/300)
  1226. Installing cryptsetup-libs (194/300)
  1227. Installing dracut (195/300)
  1228. Installing kmod (196/300)
  1229. Installing systemd (197/300)
  1230. Installing dbus (198/300)
  1231. Installing systemd-sysv (199/300)
  1232. Installing iputils (200/300)
  1233. Installing initscripts (201/300)
  1234. Installing device-mapper-event-libs (202/300)
  1235. Installing polkit (203/300)
  1236. Installing polkit-pkla-compat (204/300)
  1237. Installing cronie-anacron (205/300)
  1238. Installing cronie (206/300)
  1239. Installing crontabs (207/300)
  1240. Installing libmnl (186/300)
  1241. Installing libnetfilter_conntrack (187/300)
  1242. Installing iptables (188/300)
  1243. Installing iproute (189/300)
  1244. Installing qrencode-libs (190/300)
  1245. Installing kpartx (191/300)
  1246. Installing device-mapper (192/300)
  1247. Installing device-mapper-libs (193/300)
  1248. Installing cryptsetup-libs (194/300)
  1249. Installing dracut (195/300)
  1250. Installing kmod (196/300)
  1251. Installing systemd (197/300)
  1252. Installing dbus (198/300)
  1253. Installing systemd-sysv (199/300)
  1254. Installing iputils (200/300)
  1255. Installing initscripts (201/300)
  1256. Installing device-mapper-event-libs (202/300)
  1257. Installing polkit (203/300)
  1258. Installing polkit-pkla-compat (204/300)
  1259. Installing cronie-anacron (205/300)
  1260. Installing cronie (206/300)
  1261. Installing crontabs (207/300)
  1262. Installing os-prober (208/300)
  1263. Installing grub2-tools (209/300)
  1264. Installing device-mapper-event (210/300)
  1265. Installing lvm2-libs (211/300)
  1266. Installing dnsmasq (212/300)
  1267. Installing wpa_supplicant (213/300)
  1268. Installing ppp (214/300)
  1269. Installing hwdata (215/300)
  1270. Installing libpciaccess (216/300)
  1271. Installing libdrm (217/300)
  1272. Installing plymouth-scripts (218/300)
  1273. Installing plymouth (219/300)
  1274. Installing trousers (220/300)
  1275. Installing gnutls (221/300)
  1276. Installing glib-networking (222/300)
  1277. Installing libsoup (223/300)
  1278. Installing fxload (224/300)
  1279. Installing alsa-firmware (225/300)
  1280. Installing alsa-tools-firmware (226/300)
  1281. Installing ebtables (227/300)
  1282. Installing kernel-tools-libs (228/300)
  1283. Installing libpipeline (229/300)
  1284. Installing libaio (230/300)
  1285. Installing device-mapper-persistent-data (231/300)
  1286. Installing libndp (232/300)
  1287. Installing json-c (233/300)
  1288. Installing jansson (234/300)
  1289. Installing teamd (235/300)
  1290. Installing dmidecode (236/300)
  1291. Installing virt-what (237/300)
  1292. Installing libestr (238/300)
  1293. Installing numactl-libs (239/300)
  1294. Installing bind-license (240/300)
  1295. Installing bind-libs-lite (241/300)
  1296. Installing dhclient (242/300)
  1297. Installing NetworkManager (243/300)
  1298. Installing dracut-network (244/300)
  1299. Installing hyperv-daemons-license (245/300)
  1300. Installing kbd-legacy (246/300)
  1301. Installing kbd (247/300)
  1302. Installing hypervkvpd (248/300)
  1303. Installing kexec-tools (249/300)
  1304. Installing NetworkManager-tui (250/300)
  1305. Installing NetworkManager-team (251/300)
  1306. Installing irqbalance (252/300)
  1307. Installing rsyslog (253/300)
  1308. Installing tuned (254/300)
  1309. Installing lvm2 (255/300)
  1310. Installing man-db (256/300)
  1311. Installing kernel-tools (257/300)
  1312. Installing firewalld (258/300)
  1313. Installing grub2 (259/300)
  1314. Installing kernel (260/300)
  1315. Installing audit (261/300)
  1316. Installing postfix (262/300)
  1317. Installing rdma (263/300)
  1318. Installing biosdevname (264/300)
  1319. Installing microcode_ctl (265/300)
  1320. Installing aic94xx-firmware (266/300)
  1321. Installing openssh-server (267/300)
  1322. Installing dracut-config-rescue (268/300)
  1323. Installing parted (269/300)
  1324. Installing iprutils (270/300)
  1325. Installing selinux-policy-targeted (271/300)
  1326. Installing openssh-clients (272/300)
  1327. Installing authconfig (273/300)
  1328. Installing passwd (274/300)
  1329. Installing sudo (275/300)
  1330. Installing xfsprogs (276/300)
  1331. Installing btrfs-progs (277/300)
  1332. Installing e2fsprogs (278/300)
  1333. Installing wget (279/300)
  1334. Installing tar (280/300)
  1335. Installing libsysfs (281/300)
  1336. Installing rootfiles (282/300)
  1337. Installing iwl3945-firmware (283/300)
  1338. Installing iwl6050-firmware (284/300)
  1339. Installing iwl3160-firmware (285/300)
  1340. Installing iwl4965-firmware (286/300)
  1341. Installing iwl5000-firmware (287/300)
  1342. Installing iwl6000g2a-firmware (288/300)
  1343. [23Installing iwl7265-firmware (289/300)
  1344. Installing iwl6000g2b-firmware (290/300)
  1345. Installing ivtv-firmware (291/300)
  1346. Installing iwl105-firmware (292/300)
  1347. Installing iwl2030-firmware (293/300)
  1348. Installing iwl135-firmware (294/300)
  1349. Installing iwl2000-firmware (295/300)
  1350. ;24rInstalling iwl6000-firmware (296/300)
  1351. Installing iwl1000-firmware (297/300)
  1352. Installing iwl7260-firmware (298/300)
  1353. Installing iwl5150-firmware (299/300)
  1354. Installing iwl100-firmware (300/300)
  1355. Performing post-installation setup tasks
  1356. Installing boot loader
  1357. .
  1358. Performing post-installation setup tasks
  1359. .
  1360. 
  1361. Configuring installed system
  1362. .
  1363. Writing network configuration
  1364. .
  1365. Creating users
  1366. .
  1367. Configuring addons
  1368. .
  1369. Generating initramfs
  1370. .
  1371. Running post-installation scripts
  1372. .
  1373. (B[terminated]
  1374. [ OK ] Started Show Plymouth Reboot Screen.
  1375.  
  1376. [ OK ] Unmounted /mnt/sysimage/home.
  1377.  
  1378. Stopping Anaconda...
  1379.  
  1380. [ OK ] Removed slice system-anaconda\x2dtmux.slice.
  1381.  
  1382. [ OK ] Stopped Anaconda.
  1383.  
  1384. [ OK ] Stopped target Anaconda System Services.
  1385.  
  1386. Stopping Service enabling compressing RAM with zRam...
  1387.  
  1388. Stopping Login Service...
  1389.  
  1390. Stopping System Logging Service...
  1391.  
  1392. [ OK ] Stopped System Logging Service.
  1393.  
  1394. [ OK ] Stopped Login Service.
  1395.  
  1396. [ OK ] Stopped Service enabling compressing RAM with zRam.
  1397.  
  1398. [ OK ] Stopped target Basic System.
  1399.  
  1400. [ OK ] Stopped target Sockets.
  1401.  
  1402. [ OK ] Closed Open-iSCSI iscsid Socket.
  1403.  
  1404. [ OK ] Closed Open-iSCSI iscsiuio Socket.
  1405.  
  1406. [ OK ] Closed D-Bus System Message Bus Socket.
  1407.  
  1408. [ OK ] topped target System Initialization.
  1409.  
  1410. [ OK ] Stopped target Swap.
  1411.  
  1412. [ OK ] Stopped SetVirtual Console.
  1413.  
  1414. Stopping Setup Virtual [ OK ] Stopped Apply Kernel Variables.
  1415.  
  1416. Stopping Apply Kernel Variables...
  1417.  
  1418. ping Load/Save Rndom Seed...
  1419.  
  1420. [ OK ] Stopped Update is Completed.
  1421.  
  1422. Stopping Update is Completed...
  1423.  
  1424. [ OK ] Stopped Rebuild Journ Stopping Rebuild Journl Catalog...
  1425.  
  1426. [ OK ] Stopped Rebuild Dynamic Linker Cach Stopping Rebuild r Cache...
  1427.  
  1428. [32m OK ] Stopped Create Volatile Files and Directories.
  1429.  
  1430. Stopping Create Volatile Files and Directories...
  1431.  
  1432. [ OK ] Stopped Rebuild Hardware Database.
  1433.  
  1434. Stopping Rebuild Hardware Database...
  1435.  
  1436. [ OK ] Stopped target Encrypted Volumes.
  1437.  
  1438. [ OK ] Stopped Import network configuration from initramfs.
  1439.  
  1440. Stopping Import network configuration from initramfs...
  1441.  
  1442. [ OK ] Stopped target Local File Systems.
  1443.  
  1444. Unmounting Temporary Directory...
  1445.  
  1446. Unmounting /mnt/sysimage/proc...
  1447.  
  1448. Unmounting Configuration File System...
  1449.  
  1450. [ OK ] Stopped Configure read-only root support.
  1451.  
  1452. Stopping Configure read-only root support...
  1453.  
  1454. Unmounting /mnt/sysimage/dev/shm...
  1455.  
  1456. Unmounting /mnt/sysimage/boot...
  1457.  
  1458. Unmountimnt/sysimage/sys/fs/selinux...
  1459.  
  1460. Unmouting /mnt/sysimag Unmounting /mnt/sysimage/run...
  1461.  
  1462. [ OK ] Stoppedes.
  1463.  
  1464. [ OK ] Removed slice User and Session Slice.
  1465.  
  1466. [ OK ] Stopped target Paths.
  1467.  
  1468. [ Oped Load/Save Random Seed.
  1469.  
  1470. [ OK ] Failed unmounting Temporary Directory.
  1471.  
  1472. [ OK ] Unmounted /mnt/sysimage/proc.
  1473.  
  1474. [ OK ] Unmounted Configuration File System.
  1475.  
  1476. [ OK ] Unmounted /mnt/sysimage/dev/shm.
  1477.  
  1478. [ OK ] Unmounted /mnt/sysimage/sys/fs/selinux.
  1479.  
  1480. [ OK ] Unmounted /mnt/sysimage/dev/pts.
  1481.  
  1482. [ OK ] Stopped Availability of block devices.
  1483.  
  1484. Stopping LVM2 metadata daemon...
  1485.  
  1486. Stopping Logout off all iSCSI sessions on shutdown...
  1487.  
  1488. Unmounting /mnt/sysimage/sys...
  1489.  
  1490. Unmounting /mnt/sysimage/dev...
  1491.  
  1492. [ OK ] Stopped LVM2 metadata daemon.
  1493.  
  1494. [ OK ] Unmounted /mnt/sysimage/boot.
  1495.  
  1496. [ OK ] Unmounted /mnt/sysimage/run.
  1497.  
  1498. [ OK ] Unmounted /mnt/sysimage/sys.
  1499.  
  1500. [ OK ] Unmounted /mnt/sysimage/dev.
  1501.  
  1502. Unmounting /mnt/sysimage...
  1503.  
  1504. [ OK ] Stopped Logout off all iSCSI sessions on shutdown.
  1505.  
  1506. [ OK ] Stopped target Network.
  1507.  
  1508. [ OK ] Unmounted /mnt/sysimage.
  1509.  
  1510. [ OK ] Reached target Unmount All Filesystems.
  1511.  
  1512. [ OK ] Stopped target Local File Systems (Pre).
  1513.  
  1514. [ OK ] Stopped Remount Root and Kernel File Systems.
  1515.  
  1516. Stopping Remount Root and Kernel File Systems...
  1517.  
  1518. [ OK ] Stopped Create Static Device Nodes in /dev.
  1519.  
  1520. Stopping Create Static Device Nodes in /dev...
  1521.  
  1522. [ OK ] Started Restoe /run/initramfs.] Reached target Shu
  1523. dracut Warning: Killing all remaining processes
  1524.  
  1525. Rebooting.
  1526. [ 1052.185961] Restarting system.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!