API tools faq
paste
Advertisement
teknoraver

galileo 3.15.0-rc5

teknoraver
May 14th, 2014
351
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.62 KB | None | 0 0
raw download clone embed print report
  1. Linux version 3.15.0-rc5-alpha+ (matteo@raver) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #3 Wed May 14 12:04:29 CEST 2014
  2. KERNEL supported cpus:
  3. Intel GenuineIntel
  4. Disabling PGE capability bit
  5. e820: BIOS-provided physical RAM map:
  6. BIOS-e820: [mem 0x0000000000000000-0x0000000000096fff] usable
  7. BIOS-e820: [mem 0x0000000000097000-0x0000000000097fff] reserved
  8. BIOS-e820: [mem 0x0000000000098000-0x000000000009ffff] usable
  9. BIOS-e820: [mem 0x0000000000100000-0x000000000f0defff] usable
  10. BIOS-e820: [mem 0x000000000f0df000-0x000000000f11efff] ACPI data
  11. BIOS-e820: [mem 0x000000000f11f000-0x000000000f1defff] reserved
  12. BIOS-e820: [mem 0x000000000f1df000-0x000000000fedefff] ACPI NVS
  13. BIOS-e820: [mem 0x000000000fedf000-0x000000000feeefff] reserved
  14. BIOS-e820: [mem 0x000000000feef000-0x000000000feeffff] usable
  15. BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
  16. BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
  17. BIOS-e820: [mem 0x00000000fff30000-0x00000000fff39fff] reserved
  18. NX (Execute Disable) protection: active
  19. efi: EFI v2.31 by EKI
  20. efi: SMBIOS=0xfeee000 ACPI=0xf11e000 ACPI 2.0=0xf11e014
  21. efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000097000) (0MB)
  22. efi: mem01: type=0, attr=0xf, range=[0x0000000000097000-0x0000000000098000) (0MB)
  23. efi: mem02: type=7, attr=0xf, range=[0x0000000000098000-0x00000000000a0000) (0MB)
  24. efi: mem03: type=2, attr=0xf, range=[0x0000000000100000-0x00000000008a8000) (7MB)
  25. efi: mem04: type=7, attr=0xf, range=[0x00000000008a8000-0x0000000001ede000) (22MB)
  26. efi: mem05: type=4, attr=0xf, range=[0x0000000001ede000-0x0000000002000000) (1MB)
  27. efi: mem06: type=7, attr=0xf, range=[0x0000000002000000-0x000000000897b000) (105MB)
  28. efi: mem07: type=2, attr=0xf, range=[0x000000000897b000-0x000000000c0e0000) (55MB)
  29. efi: mem08: type=4, attr=0xf, range=[0x000000000c0e0000-0x000000000c100000) (0MB)
  30. efi: mem09: type=7, attr=0xf, range=[0x000000000c100000-0x000000000dfc5000) (30MB)
  31. efi: mem10: type=1, attr=0xf, range=[0x000000000dfc5000-0x000000000dfdb000) (0MB)
  32. efi: mem11: type=7, attr=0xf, range=[0x000000000dfdb000-0x000000000dfe9000) (0MB)
  33. efi: mem12: type=2, attr=0xf, range=[0x000000000dfe9000-0x000000000dff2000) (0MB)
  34. efi: mem13: type=4, attr=0xf, range=[0x000000000dff2000-0x000000000e47d000) (4MB)
  35. efi: mem14: type=7, attr=0xf, range=[0x000000000e47d000-0x000000000e47e000) (0MB)
  36. efi: mem15: type=4, attr=0xf, range=[0x000000000e47e000-0x000000000e48d000) (0MB)
  37. efi: mem16: type=3, attr=0xf, range=[0x000000000e48d000-0x000000000e493000) (0MB)
  38. efi: mem17: type=4, attr=0xf, range=[0x000000000e493000-0x000000000e4ee000) (0MB)
  39. efi: mem18: type=3, attr=0xf, range=[0x000000000e4ee000-0x000000000e4fb000) (0MB)
  40. efi: mem19: type=4, attr=0xf, range=[0x000000000e4fb000-0x000000000e4fd000) (0MB)
  41. efi: mem20: type=3, attr=0xf, range=[0x000000000e4fd000-0x000000000e4ff000) (0MB)
  42. efi: mem21: type=4, attr=0xf, range=[0x000000000e4ff000-0x000000000e501000) (0MB)
  43. efi: mem22: type=3, attr=0xf, range=[0x000000000e501000-0x000000000e51d000) (0MB)
  44. efi: mem23: type=4, attr=0xf, range=[0x000000000e51d000-0x000000000e520000) (0MB)
  45. efi: mem24: type=3, attr=0xf, range=[0x000000000e520000-0x000000000e522000) (0MB)
  46. efi: mem25: type=4, attr=0xf, range=[0x000000000e522000-0x000000000e523000) (0MB)
  47. efi: mem26: type=3, attr=0xf, range=[0x000000000e523000-0x000000000e552000) (0MB)
  48. efi: mem27: type=4, attr=0xf, range=[0x000000000e552000-0x000000000e566000) (0MB)
  49. efi: mem28: type=3, attr=0xf, range=[0x000000000e566000-0x000000000e56a000) (0MB)
  50. efi: mem29: type=4, attr=0xf, range=[0x000000000e56a000-0x000000000e56b000) (0MB)
  51. efi: mem30: type=3, attr=0xf, range=[0x000000000e56b000-0x000000000e56e000) (0MB)
  52. efi: mem31: type=4, attr=0xf, range=[0x000000000e56e000-0x000000000e56f000) (0MB)
  53. efi: mem32: type=3, attr=0xf, range=[0x000000000e56f000-0x000000000e57d000) (0MB)
  54. efi: mem33: type=4, attr=0xf, range=[0x000000000e57d000-0x000000000e58d000) (0MB)
  55. efi: mem34: type=3, attr=0xf, range=[0x000000000e58d000-0x000000000e599000) (0MB)
  56. efi: mem35: type=4, attr=0xf, range=[0x000000000e599000-0x000000000e5bb000) (0MB)
  57. efi: mem36: type=3, attr=0xf, range=[0x000000000e5bb000-0x000000000e5bc000) (0MB)
  58. efi: mem37: type=4, attr=0xf, range=[0x000000000e5bc000-0x000000000e5d9000) (0MB)
  59. efi: mem38: type=3, attr=0xf, range=[0x000000000e5d9000-0x000000000e5e2000) (0MB)
  60. efi: mem39: type=4, attr=0xf, range=[0x000000000e5e2000-0x000000000e5ed000) (0MB)
  61. efi: mem40: type=3, attr=0xf, range=[0x000000000e5ed000-0x000000000e5f2000) (0MB)
  62. efi: mem41: type=4, attr=0xf, range=[0x000000000e5f2000-0x000000000e5f3000) (0MB)
  63. efi: mem42: type=3, attr=0xf, range=[0x000000000e5f3000-0x000000000e5fc000) (0MB)
  64. efi: mem43: type=4, attr=0xf, range=[0x000000000e5fc000-0x000000000e5ff000) (0MB)
  65. efi: mem44: type=3, attr=0xf, range=[0x000000000e5ff000-0x000000000e618000) (0MB)
  66. efi: mem45: type=4, attr=0xf, range=[0x000000000e618000-0x000000000e73c000) (1MB)
  67. efi: mem46: type=3, attr=0xf, range=[0x000000000e73c000-0x000000000e752000) (0MB)
  68. efi: mem47: type=4, attr=0xf, range=[0x000000000e752000-0x000000000e754000) (0MB)
  69. efi: mem48: type=3, attr=0xf, range=[0x000000000e754000-0x000000000e75b000) (0MB)
  70. efi: mem49: type=4, attr=0xf, range=[0x000000000e75b000-0x000000000e760000) (0MB)
  71. efi: mem50: type=3, attr=0xf, range=[0x000000000e760000-0x000000000e761000) (0MB)
  72. efi: mem51: type=4, attr=0xf, range=[0x000000000e761000-0x000000000e762000) (0MB)
  73. efi: mem52: type=3, attr=0xf, range=[0x000000000e762000-0x000000000e77d000) (0MB)
  74. efi: mem53: type=4, attr=0xf, range=[0x000000000e77d000-0x000000000e77e000) (0MB)
  75. efi: mem54: type=3, attr=0xf, range=[0x000000000e77e000-0x000000000e784000) (0MB)
  76. efi: mem55: type=4, attr=0xf, range=[0x000000000e784000-0x000000000e79f000) (0MB)
  77. efi: mem56: type=3, attr=0xf, range=[0x000000000e79f000-0x000000000e7a1000) (0MB)
  78. efi: mem57: type=4, attr=0xf, range=[0x000000000e7a1000-0x000000000e7a2000) (0MB)
  79. efi: mem58: type=3, attr=0xf, range=[0x000000000e7a2000-0x000000000e7a6000) (0MB)
  80. efi: mem59: type=4, attr=0xf, range=[0x000000000e7a6000-0x000000000e7a7000) (0MB)
  81. efi: mem60: type=3, attr=0xf, range=[0x000000000e7a7000-0x000000000e7b0000) (0MB)
  82. efi: mem61: type=4, attr=0xf, range=[0x000000000e7b0000-0x000000000e7b3000) (0MB)
  83. efi: mem62: type=3, attr=0xf, range=[0x000000000e7b3000-0x000000000e7b7000) (0MB)
  84. efi: mem63: type=4, attr=0xf, range=[0x000000000e7b7000-0x000000000e7c9000) (0MB)
  85. efi: mem64: type=3, attr=0xf, range=[0x000000000e7c9000-0x000000000e7cb000) (0MB)
  86. efi: mem65: type=4, attr=0xf, range=[0x000000000e7cb000-0x000000000e7d3000) (0MB)
  87. efi: mem66: type=3, attr=0xf, range=[0x000000000e7d3000-0x000000000e7d9000) (0MB)
  88. efi: mem67: type=4, attr=0xf, range=[0x000000000e7d9000-0x000000000e7e1000) (0MB)
  89. efi: mem68: type=3, attr=0xf, range=[0x000000000e7e1000-0x000000000e7e5000) (0MB)
  90. efi: mem69: type=4, attr=0xf, range=[0x000000000e7e5000-0x000000000e801000) (0MB)
  91. efi: mem70: type=3, attr=0xf, range=[0x000000000e801000-0x000000000e806000) (0MB)
  92. efi: mem71: type=4, attr=0xf, range=[0x000000000e806000-0x000000000f0df000) (8MB)
  93. efi: mem72: type=9, attr=0xf, range=[0x000000000f0df000-0x000000000f11f000) (0MB)
  94. efi: mem73: type=5, attr=0x800000000000000f, range=[0x000000000f11f000-0x000000000f17f000) (0MB)
  95. efi: mem74: type=6, attr=0x800000000000000f, range=[0x000000000f17f000-0x000000000f1df000) (0MB)
  96. efi: mem75: type=10, attr=0xf, range=[0x000000000f1df000-0x000000000fedf000) (13MB)
  97. efi: mem76: type=0, attr=0xf, range=[0x000000000fedf000-0x000000000feef000) (0MB)
  98. efi: mem77: type=4, attr=0xf, range=[0x000000000feef000-0x000000000fef0000) (0MB)
  99. efi: mem78: type=11, attr=0x8000000000000000, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
  100. efi: mem79: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
  101. efi: mem80: type=11, attr=0x8000000000000001, range=[0x00000000fff30000-0x00000000fff3a000) (0MB)
  102. SMBIOS 2.7 present.
  103. e820: last_pfn = 0xfef0 max_arch_pfn = 0x1000000
  104. init_memory_mapping: [mem 0x00000000-0x000fffff]
  105. init_memory_mapping: [mem 0x0dc00000-0x0ddfffff]
  106. init_memory_mapping: [mem 0x0c000000-0x0dbfffff]
  107. init_memory_mapping: [mem 0x00100000-0x0bffffff]
  108. init_memory_mapping: [mem 0x0de00000-0x0f0defff]
  109. init_memory_mapping: [mem 0x0feef000-0x0feeffff]
  110. ACPI: RSDP 0x0F11E014 000024 (v02 INTEL )
  111. ACPI: XSDT 0x0F11D0E8 00006C (v01 INTEL TIANO 00000003 01000013)
  112. ACPI: FACP 0x0F11B000 0000F4 (v03 INTEL TIANO 00000003 INTL 0100000D)
  113. ACPI: DSDT 0x0F113000 0015A2 (v01 INTEL ClantonN 00000003 INTL 20081031)
  114. ACPI: FACS 0x0F2C7000 000040
  115. ACPI: UEFI 0x0FCD5000 000042 (v01 00000000 00000000)
  116. ACPI: APIC 0x0F11C000 00005A (v01 INTEL TIANO 00000001 MSFT 00000000)
  117. ACPI: HPET 0x0F11A000 000038 (v01 00000001 00000000)
  118. ACPI: MCFG 0x0F119000 00003C (v01 00000001 00000000)
  119. ACPI: SSDT 0x0F118000 0004D8 (v01 SsgPmm Cpu0Cst 00000011 INTL 20081031)
  120. ACPI: SSDT 0x0F117000 00043F (v01 SsgPmm Cpu0Ist 00000012 INTL 20081031)
  121. ACPI: SSDT 0x0F116000 00013B (v01 SsgPmm Cpu0Tst 00000013 INTL 20081031)
  122. ACPI: SSDT 0x0F115000 000056 (v01 SsgPmm CpuPm 00000010 INTL 20081031)
  123. 254MB LOWMEM available.
  124. mapped low ram: 0 - 0fef0000
  125. low ram: 0 - 0fef0000
  126. Zone ranges:
  127. Normal [mem 0x00001000-0x0feeffff]
  128. Movable zone start for each node
  129. Early memory node ranges
  130. node 0: [mem 0x00001000-0x00096fff]
  131. node 0: [mem 0x00098000-0x0009ffff]
  132. node 0: [mem 0x00100000-0x0f0defff]
  133. node 0: [mem 0x0feef000-0x0feeffff]
  134. Using APIC driver default
  135. ACPI: PM-Timer IO Port: 0x1008
  136. ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
  137. ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  138. ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  139. IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
  140. ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  141. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  142. Using ACPI (MADT) for SMP configuration information
  143. ACPI: HPET id: 0x8086a201 base: 0xfed00000
  144. e820: [mem 0x0fef0000-0xdfffffff] available for PCI devices
  145. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 61056
  146. Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.15 root=/dev/mmcblk0p2 ro rootwait init=/bin/systemdX panic=1 console=ttyS1,115200n8 net.ifnames=0 reboot=efi,warm efi_main=0x00000001462fc85c c
  147. PID hash table entries: 1024 (order: 0, 4096 bytes)
  148. Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  149. Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  150. Initializing CPU#0
  151. Memory: 219568K/246264K available (3570K kernel code, 221K rwdata, 1168K rodata, 272K init, 380K bss, 26696K reserved)
  152. virtual kernel memory layout:
  153. fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
  154. vmalloc : 0xd06f0000 - 0xfffa1000 ( 760 MB)
  155. lowmem : 0xc0000000 - 0xcfef0000 ( 254 MB)
  156. .init : 0xc14db000 - 0xc151f000 ( 272 kB)
  157. .data : 0xc137ce33 - 0xc14d9620 (1393 kB)
  158. .text : 0xc1000000 - 0xc137ce33 (3571 kB)
  159. Checking if this processor honours the WP bit even in supervisor mode...Ok.
  160. SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  161. NR_IRQS:2304 nr_irqs:256 16
  162. tsc: Fast TSC calibration using PIT
  163. tsc: Detected 399.076 MHz processor
  164. Calibrating delay loop (skipped), value calculated using timer frequency.. 798.15 BogoMIPS (lpj=3990760)
  165. pid_max: default: 32768 minimum: 301
  166. ACPI: Core revision 20140214
  167. ACPI: All ACPI Tables successfully acquired
  168. Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  169. Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  170. Disabling PGE capability bit
  171. Intel Pentium with F0 0F bug - workaround enabled.
  172. Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
  173. Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
  174. tlb_flushall_shift: 6
  175. CPU: Intel 05/09 (fam: 05, model: 09, stepping: 00)
  176. Performance Events: no PMU driver, software events only.
  177. Enabling APIC mode: Flat. Using 1 I/O APICs
  178. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
  179. devtmpfs: initialized
  180. NET: Registered protocol family 16
  181. cpuidle: using governor ladder
  182. cpuidle: using governor menu
  183. ACPI: bus type PCI registered
  184. PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  185. PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
  186. PCI: Using MMCONFIG for extended config space
  187. PCI: Using configuration type 1 for base access
  188. ACPI: Added _OSI(Module Device)
  189. ACPI: Added _OSI(Processor Device)
  190. ACPI: Added _OSI(3.0 _SCP Extensions)
  191. ACPI: Added _OSI(Processor Aggregator Device)
  192. [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
  193. ACPI: Interpreter enabled
  194. ACPI: (supports S0 S5)
  195. ACPI: Using IOAPIC for interrupt routing
  196. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
  197. ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  198. acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  199. acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
  200. PCI host bridge to bus 0000:00
  201. pci_bus 0000:00: root bus resource [bus 00-ff]
  202. pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
  203. pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
  204. pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
  205. pci_bus 0000:00: root bus resource [mem 0x10000000-0xfebfffff]
  206. pci 0000:00:17.0: PCI bridge to [bus 01]
  207. pci 0000:00:17.1: PCI bridge to [bus 02]
  208. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
  209. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
  210. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
  211. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
  212. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
  213. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
  214. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
  215. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
  216. ACPI: Enabled 1 GPEs in block 00 to 1F
  217. pps_core: LinuxPPS API ver. 1 registered
  218. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  219. PTP clock support registered
  220. PCI: Using ACPI for IRQ routing
  221. cfg80211: Calling CRDA to update world regulatory domain
  222. HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  223. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  224. hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  225. Switched to clocksource hpet
  226. pnp: PnP ACPI init
  227. ACPI: bus type PNP registered
  228. system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
  229. system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
  230. system 00:00: [mem 0x000c0000-0x000dffff] has been reserved
  231. system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
  232. system 00:00: [mem 0xff800000-0xffffffff] could not be reserved
  233. system 00:03: [io 0x1000-0x100f] has been reserved
  234. system 00:03: [io 0x1010-0x101f] could not be reserved
  235. system 00:03: [io 0x1100-0x113f] has been reserved
  236. system 00:03: [io 0x1080-0x10bf] has been reserved
  237. system 00:03: [io 0x1040-0x107f] has been reserved
  238. system 00:03: [io 0x1020-0x103f] has been reserved
  239. system 00:03: [io 0x1140-0x117f] has been reserved
  240. pnp: PnP ACPI: found 6 devices
  241. ACPI: bus type PNP unregistered
  242. pci 0000:00:17.0: BAR 9: assigned [mem 0x10000000-0x101fffff 64bit pref]
  243. pci 0000:00:17.1: BAR 8: assigned [mem 0x10200000-0x103fffff]
  244. pci 0000:00:17.1: BAR 9: assigned [mem 0x10400000-0x105fffff 64bit pref]
  245. pci 0000:00:17.0: BAR 7: assigned [io 0x2000-0x2fff]
  246. pci 0000:00:17.1: BAR 7: assigned [io 0x3000-0x3fff]
  247. pci 0000:00:17.0: PCI bridge to [bus 01]
  248. pci 0000:00:17.0: bridge window [io 0x2000-0x2fff]
  249. pci 0000:00:17.0: bridge window [mem 0x90000000-0x900fffff]
  250. pci 0000:00:17.0: bridge window [mem 0x10000000-0x101fffff 64bit pref]
  251. pci 0000:00:17.1: PCI bridge to [bus 02]
  252. pci 0000:00:17.1: bridge window [io 0x3000-0x3fff]
  253. pci 0000:00:17.1: bridge window [mem 0x10200000-0x103fffff]
  254. pci 0000:00:17.1: bridge window [mem 0x10400000-0x105fffff 64bit pref]
  255. NET: Registered protocol family 2
  256. TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  257. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  258. TCP: Hash tables configured (established 2048 bind 2048)
  259. TCP: reno registered
  260. UDP hash table entries: 256 (order: 0, 4096 bytes)
  261. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  262. NET: Registered protocol family 1
  263. futex hash table entries: 256 (order: -1, 3072 bytes)
  264. msgmni has been set to 465
  265. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  266. io scheduler noop registered
  267. io scheduler deadline registered (default)
  268. Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  269. 0000:00:14.1: ttyS0 at MMIO 0x9010f000 (irq = 17, base_baud = 2764800) is a 16550A
  270. console [ttyS1] disabled
  271. 0000:00:14.5: ttyS1 at MMIO 0x9010b000 (irq = 17, base_baud = 2764800) is a 16550A
  272. console [ttyS1] enabled
  273. tsc: Refined TSC clocksource calibration: 399.076 MHz
  274. ath9k 0000:01:00.0: enabling device (0000 -> 0002)
  275. ath: phy0: Enable LNA combining
  276. ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xe0820000, irq=20
  277. rtc_cmos 00:01: RTC can wake from S4
  278. rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
  279. rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs
  280. i2c /dev entries driver
  281. sdhci: Secure Digital Host Controller Interface driver
  282. sdhci: Copyright(c) Pierre Ossman
  283. sdhci-pci 0000:00:14.0: SDHCI controller found [8086:08a7] (rev 10)
  284. mmc0: no vqmmc regulator found
  285. mmc0: no vmmc regulator found
  286. mmc0: SDHCI controller on PCI [0000:00:14.0] using ADMA
  287. EFI Variables Facility v0.08 2004-May-17
  288. pstore: Registered efi as persistent store backend
  289. TCP: cubic registered
  290. NET: Registered protocol family 10
  291. sit: IPv6 over IPv4 tunneling driver
  292. NET: Registered protocol family 17
  293. Using IPI Shortcut mode
  294. rtc_cmos 00:01: setting system clock to 2014-05-14 10:09:01 UTC (1400062141)
  295. Waiting for root device /dev/mmcblk0p2...
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!