Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Source: http://www.gamefront.com/crysis-3-pc-developer-console-commands/
- Gameplay
- Field of View
- CVar: cl_fov
- Recommended to be placed in system.cfg
- The vertical field of view in degrees.
- This controls several individual FOV controls That you can tweak manually if you prefer:
- cl_FOV – The main field of view
- r_DrawNearFOV – the field of view for nearby objects (held weapon, etc)
- pl_movement.power_sprint_targetFOV – The field of view while power sprinting
- Default Value: 60
- HUD Bobbing
- CVar: cl_bobhud
- Recommended to be placed in system.cfg
- Controls the amount of bob hud which is applied.
- Default is 1.0
- HUD Canvas Adjustment
- CVar: hud_canvas_width_adjustment
- Recommended to be placed in system.cfg
- Multiplayer only. Multiplies the width of the HUD’s virtual canvas in cases where it may overlap monitor boundaries in multi-monitor setups. NOTE: before this multiplier is applied, the HUD clamps itself to a 16:9 res.
- Default is 1.0
- Hud Hide
- CVar: hud_hide
- Recommended to be placed in system.cfg
- If this cvar is true the HUD will be hidden from view completely.
- Suitable for screenshots or very immersive play. NOTE: This feature is not fully supported, and this cvar value might need to be reset in game, e.g. on loading a save.
- Default is off (hud visible)
- Music Volume
- CVar: s_MusicVolume
- Recommended to be placed in system.cfg
- Controls the volume of Music, in the range from 0.0 to 1.0.
- Default is 1.0, full volume.
- SFX Volume
- CVar: s_SFXVolume
- Recommended to be placed in system.cfg
- Controls the volume of SFX, in the range from 0.0 to 1.0.
- Default is 1.0, full volume.
- Dialog Volume
- CVar: s_DialogVolume
- Recommended to be placed in system.cfg
- Controls the volume of Dialog, in the range from 0.0 to 1.0.
- Default is 1.0, full volume.
- Max FPS Limit
- CVar: sys_MaxFps
- Recommended to be placed in system.cfg
- Limits the frame rate to specified number.
- A value of 0 means no limit.
- Default is 0
- Input
- Toggle Crouch
- CVar: cl_crouchToggle
- Recommended to be placed in system.cfg
- Makes the crouch key work as a toggle.
- Default is on
- Toggle Zoom
- CVar: cl_zoomToggle
- Recommended to be placed in system.cfg
- Makes the zoom key work as a toggle.
- Default is on
- Mouse Smoothing
- CVar: i_mouse_smooth
- Recommended to be placed in system.cfg
- Set mouse smoothing value, also if 0 (disabled) there will be a simple average between the old and the actual input.
- (1.0 = very very smooth, 30 = almost instant)
- Default is 0.0
- Mouse Acceleration
- CVar: i_mouse_accel
- Recommended to be placed in system.cfg
- Set mouse acceleration, 0.0 means no acceleration.
- Default is 0.0
- Mouse Acceleration Max
- CVar: i_mouse_accel_max
- Recommended to be placed in system.cfg
- Set mouse max mouse delta when using acceleration.
- Default is 100.0
- Mouse Sensitivity
- CVar: cl_sensitivity
- Recommended to be placed in system.cfg
- Sets mouse sensitivity.
- Default is 30.0
- Graphics Features
- Particle Collisions
- CVar: e_ParticlesObjectCollisions
- Recommended to be placed in autoexec.cfg
- Controls what objects particles will collide with.
- Default Value: Static (Low/Medium), Dynamic (High/Very High)
- None: No particle collisions at all.
- Static: Particles tagged for collisions will interact with static objects.
- Dynamic: As with Static, but dynamic objects also.
- Particle Motion Blur
- CVar: e_ParticlesMotionBlur
- Recommended to be placed in autoexec.cfg
- Enables or disables motion blur effect on fast moving particles.
- Default Value: Off (Low/Medium/High), On (Very High)
- Force Soft Particles
- CVar: e_ParticlesForceSoftParticles
- Recommended to be placed in autoexec.cfg
- Forces all possible particles to use soft intersections with geometry – increases the cost but will all but eliminate hard edges on particles.
- Default Value: Off (Low/Medium/High), On (Very High)
- Tessellation
- CVar: e_Tessellation
- Recommended to be placed in autoexec.cfg
- Enables or disables DX11 ALL tessellation.
- Default Value: Off (Low/Medium/High), On (Very High)
- NOTE: Currently not tweakable in the latest build of the game.
- Will be tweakable soon.
- Water Ocean Tessellation
- CVar: r_WaterTessellationHW
- Recommended to be placed in autoexec.cfg
- Enables or disables DX11 tessellation for the ocean water surface.
- Default Value: Off (Low/Medium/High), On (Very High)
- Pixel Accurate Displacement Maps
- CVar: r_SilhouettePOM
- Recommended to be placed in autoexec.cfg
- Enables or disables the Pixel Accurate Displacement Mapping (VERY GPU intensive).
- Default Value: Off (Low/Medium/High), On (Very High)
- Real-time Global Illumination
- CVar: e_GI
- Recommended to be placed in autoexec.cfg
- Enables or disables real-time Global Illumination.
- Default Value: Off (Low), On (Medium/High/Very High)
- Real-time Volumetric Cloud Shadows
- CVar: r_FogShadows
- Recommended to be placed in autoexec.cfg
- Enables or disables Real-time Volumetric Cloud Shadows.
- Default Value: Off (Low/Medium), On (High/Very High)
- Volumetric Water Shadows
- CVar: r_FogShadowsWater
- Recommended to be placed in autoexec.cfg
- Enables or disables the Real-time Volumetric Shadows underneath water.
- Default Value: Off (Low), On (Medium/High/Very High)
- Screen-space Reflections
- CVar: r_SSReflections
- Recommended to be placed in autoexec.cfg
- Enables or disables the Screen-Space reflections effect on glossy or reflective materials.
- Default Value: Off (Low/Medium/High), On (Very High)
- Depth of Field
- CVar: r_DepthOfField
- Recommended to be placed in autoexec.cfg
- Enables or disables the depth of field blur effect.
- Default Value: OnNOTE: Currently not tweakable in the latest build of the game.
- Will be tweakable soon.
- Explosion Blur
- CVar: g_radialBlur
- Recommended to be placed in autoexec.cfg
- Enables or disables the radial blur effect applied after an explosion.
- Default Value: On
- Color Grading
- CVar: r_ColorGrading
- Recommended to be placed in autoexec.cfg
- Enables or disables the artist controlled color grading post-processing effect.
- Default Value: On
- Graphics Tweaking
- Sharpening
- CVar: r_Sharpening
- Recommended to be placed in autoexec.cfg
- Controls the level of the post-processing image sharpening filter.
- Higher values give more sharpening, but too high values will create artifacts
- A value of 0.0 is off
- Default Value: 0.25
- Chromatic Aberration
- CVar: r_ChromaticAberration
- Recommended to be placed in autoexec.cfg
- Controls the level of the post-processing chromatic aberration.
- A value of 0.0 is off
- Default Value: 1.5
- Filmgrain
- CVar: r_HDRGrainAmount
- Recommended to be placed in autoexec.cfg
- Controls the level of film grain applied to the final image to help alleviate artifacts from lack of colour precision in 32-bit colour displays.
- A value of 0.0 is off
- Default Value: 0.0
- Bloom amount
- CVar: r_HDRBloomRatio
- Recommended to be placed in autoexec.cfg
- Controls the level of bloom used to simulate over-bright areas of the screen
- Default Value: 0.15
- Bloom threshold
- CVar: r_HDRBrightLevel
- Recommended to be placed in autoexec.cfg
- Controls the brightness level threshold used to compute bloom
- Default Value: 1.0
- Ambient Occlusion Method
- CVar: r_ssao
- Recommended to be placed in autoexec.cfg
- Chooses the ambient occlusion method
- Default Value: SSAO (Low/Medium/High), SSDO (Very High)
- None: No ambient occlusion is used.
- SSAO: Screen-space Ambient Occlusion.
- SSDO: Screen-space Directional Occlusion.
- Texture Pool Size (MB)
- CVar: r_TexturesStreamPoolSize
- Recommended to be placed in autoexec.cfg
- Sets the size of VRAM that is available in a pool for texture streaming.
- Value is in Megabytes, and may be clamped based on the amount of video memory detected
- Default Value: 192 (Low), 384 (Medium), 512 (High/Very High)
- Shadow Timeslicing
- CVar: e_GsmCache
- Recommended to be placed in autoexec.cfg
- Saves GPU performance by updating distant shadows less often.
- Default Value: On (Low) Off (Medium/High/Very High)
- Shadow Casting Light Scale
- CVar: e_ShadowsResScale
- Recommended to be placed in autoexec.cfg
- Controls the resolution of shadow maps used for individual shadow casting lights.
- Value is an arbitrary multiplier, so doubling this will double the resolution of each light
- Default Value: 3.4 (Low/Medium/High), 40 (Very High)
- Tessellated Shadow Cascades
- CVar: e_ShadowsTessellateCascades
- Recommended to be placed in autoexec.cfg
- Determines how many shadow cascades to apply tessellation for.
- A setting of 0 disables tessellation in all shadows.
- Default Value: 1
- NOTE: Currently not tweakable in the latest build of the game.
- Will be tweakable soon.
- Shadow Pool Size
- CVar: e_ShadowsPoolSize
- Recommended to be placed in autoexec.cfg
- Sets the size of the shadow pool render target – increased size produces more resolution available for, and fewer artifacts in shadow casting lights (NOT including the sun). Value should be a power of 2 (128, 256, …)
- If the pool is too small to fit the minimum size for the shadow casting lights, the GPU will thrash and performance will be severely impacted
- Default Value: 2048 (Low/Medium/High), 4096 (Very High)
- Sun Shadow Map Size
- CVar: e_ShadowsMaxTexRes
- Recommended to be placed in autoexec.cfg
- Sets the size of each sun shadow cascade – increased size produces more resolution available for sun shadows.
- Default Value: 512 (Low), 1024 (Medium/High/Very High)
- Global Illumination Timeslicing
- CVar: e_GICache
- Recommended to be placed in autoexec.cfg
- Sets the number of frames to cache GI results for before regenerating
- A value of 0 disables all caching and regenerates GI every frame
- Default Value: 7
- Global Illumination Iterations
- CVar: e_GIIterations
- Recommended to be placed in autoexec.cfg
- Sets the number of iterations to perform when calculating Global Illumination
- A higher number will reduce bleeding and lengthen the light propagation distance
- Default Value: 10
- Tessellation Distance Limit
- CVar: e_TessellationMaxDistance
- Recommended to be placed in autoexec.cfg
- Changes the distance in metres where tessellation will stop applying to objects
- Default Value: 30
- Tessellation Triangle Target Size
- CVar: r_TessellationTriangleSize
- Recommended to be placed in autoexec.cfg
- The length of a triangle edge in pixels to aim for when tessellating.
- Default Value: 8
- Grass Instance Animation Distance
- CVar: e_MergedMeshesInstanceDist
- Recommended to be placed in autoexec.cfg
- Distance fudge-factor where interactive grass instances will stop animating.
- Default Value: 4.5 (Low/Medium/High) 8.0 (Very High)
- Grass Instance Max Distance
- CVar: e_MergedMeshesViewDistRatio
- Recommended to be placed in autoexec.cfg
- Multiplier controlling where chunks of interactive grass instances will disappear in the distance.
- Default Value: 50
- LOD distance ratio
- CVar: e_LodRatio
- Recommended to be placed in autoexec.cfg
- Controls how close objects drop to lower Levels Of Detail. A higher number means a longer distance before this drop happens.
- Default Value: 4 (Low), 6 (Medium) 20 (High), 40 (Very High)
- View distance ratio (General)
- CVar: e_ViewDistRatio
- Recommended to be placed in autoexec.cfg
- Controls how close objects will stop rendering in the distance.
- Default Value: 25 (Low), 35 (Medium) 100 (High/Very High)
- View distance ratio (Vegetation)
- CVar: e_ViewDistRatioVegetation
- Recommended to be placed in autoexec.cfg
- Controls how close vegetation will stop rendering in the distance.
- Default Value: 21 (Low), 31 (Medium) 100 (High/Very High)
- View distance ratio (Detail)
- CVar: e_ViewDistRatioDetail
- Recommended to be placed in autoexec.cfg
- Controls how close certain objects marked as ‘detail’ by artists will stop rendering in the distance.
- Default Value: 19 (Low), 24 (Medium) 100 (High/Very High)
- Miscellaneous
- Skip Intro Movies
- CVar: g_skipIntro
- Recommended to be placed in system.cfg
- Skips the introduction movies that play before the main menu at game boot.
- Default Value: Off
- Fullscreen window mode
- CVar: r_FullscreenWindow
- Recommended to be placed in system.cfg
- When enabled, selecting ‘fullscreen’ in the menus will use a window that fills the screen, allowing easy alt-tab.
- Windowed mode will behave as normal.
- Default Value: Off
- Disallow Fullscreen Pre-emption
- CVar: r_FullscreenPreemption
- Recommended to be placed in system.cfg
- When enabled, Pop-ups such as instant message windows and other focus-stealing windows will not minimise the game.
- Default Value: On
- Force Output Monitor
- CVar: r_overrideDXGIOutput
- Recommended to be placed in system.cfg
- Gives the number of display to use when creating the game window. 0 is the default/primary monitor and 1, 2, etc are displays after that. Allows you to create the window on a different monitor from your primary monitor (e.g. a TV or other external display)
- Default Value: 0
- Multi-GPU Support
- CVar: r_MGPU
- Recommended to be placed in system.cfg
- Determines Multi-GPU support in engine.
- Default Value: Autodetect
- Disabled: No multi-GPU support.
- Forced: Multi-GPU support is force-enabled.
- Autodetect: CryEngine auto-detects whether or not to enable Multi-GPU support.
- Hardware Gamma Level
- CVar: r_Gamma
- Recommended to be placed in system.cfg
- Changes the hardware gamma level. Affects desktop as well.
- Default Value: 1.0
- Internal Occlusion Culling
- CVar: e_CoverageBufferReproj
- Recommended to be placed in autoexec.cfg
- Controls the internal occlusion culling. You shouldn’t need to modify this cvar, but if you encounter any popping with rapid moving, experiment with disabling this.
- Default Value: On
- Game Network Port
- CVar: g_blaze_gamePort
- Recommended to be placed in system.cfg
- The network port games connections will be made on.
- Enable Blaze VOIP
- CVar: net_blaze_voip_enable
- Recommended to be placed in system.cfg
- Toggles whether Blaze VOIP is enabled or not.
- Default Value: On
- Enable Blaze VOIP PTT
- CVar: net_blaze_voip_enable_ptt
- Recommended to be placed in system.cfg
- Toggles whether Blaze VOIP Push-to-talk is enabled or not.
- Default Value: On
- Enable Blaze VOIP
- CVar: net_blaze_voip_playback_volume
- Recommended to be placed in system.cfg
- Sets the Blaze VOIP playback volume, in the range 0.0 to 1.0.
- Default Value: 1.0 Full volume
Advertisement
Add Comment
Please, Sign In to add comment