SHARE
TWEET

Debian boot with mtdparts

a guest Apr 16th, 2020 4 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. pi@raspberrypi:~ $ kwboot -t -B 115200 /dev/ttyUSB0 -b u-boot-spl-2019.10-tld-1.ds414.kwb -a
  2. Sending boot message. Please reboot the target...-
  3. Sending boot image...
  4.   0 % [......................................................................]
  5.   1 % [......................................................................]
  6.   2 % [......................................................................]
  7.   3 % [......................................................................]
  8.   5 % [......................................................................]
  9.   6 % [......................................................................]
  10.   7 % [......................................................................]
  11.   9 % [......................................................................]
  12.  10 % [......................................................................]
  13.  11 % [......................................................................]
  14.  12 % [...
  15. U-Boot SPL 2019.10-tld-1 (Apr 09 2020 - 16:26:57 -0700)
  16. High speed PHY - Version: 2.1.5 (COM-PHY-V20)
  17. High speed PHY - Ended Successfully
  18. DDR3 Training Sequence - Ver 5.7.4
  19. DDR3 Training Sequence - Ended Successfully
  20. ...................................................................]
  21.  14 % [......................................................................]
  22.  15 % [......................................................................]
  23.  16 % [......................................................................]
  24.  18 % [......................................................................]
  25.  19 % [......................................................................]
  26.  20 % [......................................................................]
  27.  21 % [......................................................................]
  28.  23 % [......................................................................]
  29.  24 % [......................................................................]
  30.  25 % [......................................................................]
  31.  27 % [......................................................................]
  32.  28 % [......................................................................]
  33.  29 % [......................................................................]
  34.  30 % [......................................................................]
  35.  32 % [......................................................................]
  36.  33 % [......................................................................]
  37.  34 % [......................................................................]
  38.  36 % [......................................................................]
  39.  37 % [......................................................................]
  40.  38 % [......................................................................]
  41.  39 % [......................................................................]
  42.  41 % [......................................................................]
  43.  42 % [......................................................................]
  44.  43 % [......................................................................]
  45.  45 % [......................................................................]
  46.  46 % [......................................................................]
  47.  47 % [......................................................................]
  48.  48 % [......................................................................]
  49.  50 % [......................................................................]
  50.  51 % [......................................................................]
  51.  52 % [......................................................................]
  52.  54 % [......................................................................]
  53.  55 % [......................................................................]
  54.  56 % [......................................................................]
  55.  57 % [......................................................................]
  56.  59 % [......................................................................]
  57.  60 % [......................................................................]
  58.  61 % [......................................................................]
  59.  63 % [......................................................................]
  60.  64 % [......................................................................]
  61.  65 % [......................................................................]
  62.  66 % [......................................................................]
  63.  68 % [......................................................................]
  64.  69 % [......................................................................]
  65.  70 % [......................................................................]
  66.  72 % [......................................................................]
  67.  73 % [......................................................................]
  68.  74 % [......................................................................]
  69.  75 % [......................................................................]
  70.  77 % [......................................................................]
  71.  78 % [......................................................................]
  72.  79 % [......................................................................]
  73.  81 % [......................................................................]
  74.  82 % [......................................................................]
  75.  83 % [......................................................................]
  76.  84 % [......................................................................]
  77.  86 % [......................................................................]
  78.  87 % [......................................................................]
  79.  88 % [......................................................................]
  80.  90 % [......................................................................]
  81.  91 % [......................................................................]
  82.  92 % [......................................................................]
  83.  93 % [......................................................................]
  84.  95 % [......................................................................]
  85.  96 % [......................................................................]
  86.  97 % [......................................................................]
  87.  99 % [.....................................................]
  88. [Type Ctrl-\ + c to quit]
  89.  
  90. U-Boot 2019.10-tld-1 (Apr 09 2020 - 16:26:57 -0700)
  91.  
  92. SoC:   MV78230-B0 at 1333 MHz
  93. I2C:   ready
  94. DRAM:  1 GiB (667 MHz, 32-bit, ECC not enabled)
  95. Loading Environment from SPI Flash... SF: Detected n25q064 with page size 256 Bytes, erase size 4 KiB, total 8 MiB
  96. *** Warning - bad CRC, using default environment
  97.  
  98. In:    serial@12000
  99. Out:   serial@12000
  100. Err:   serial@12000
  101. Model: Synology DS414
  102. Board: DS414
  103. Net:  
  104. Warning: ethernet@70000 (eth0) using random MAC address - b2:c8:c9:8b:d1:6a
  105. eth0: ethernet@70000
  106. Warning: ethernet@74000 (eth1) using random MAC address - ca:95:76:ca:f1:f7
  107. , eth1: ethernet@74000
  108. starting USB...
  109. Bus usb@50000: USB EHCI 1.00
  110. scanning bus usb@50000 for devices...
  111. USB retry period from the environment: 0 second(s)
  112. 2 USB Device(s) found
  113.        scanning usb for storage devices... 1 Storage Device(s) found
  114. SF: Detected n25q064 with page size 256 Bytes, erase size 4 KiB, total 8 MiB
  115. Hit any key to stop autoboot:  0
  116. => setenv bootargs 'console=ttyS0,115200 root=/dev/sda1 rootdelay=20 mtdparts=spi0.0:0x000d0000(u-boot),0x002d0000(zimage),0x00430000(rd),0x00010000(vendor),0x00010000(u-boot-envs),0x00010000(fis) earlyprintk=serial'
  117. => ext2load usb 0:1 2000000 boot/uImage
  118. 5074848 bytes read in 230 ms (21 MiB/s)
  119. => bootm 0x2000000
  120. ## Booting kernel from Legacy Image at 02000000 ...
  121.    Image Name:   Linux-5.2.9-mvebu-tld-1
  122.    Image Type:   ARM Linux Kernel Image (uncompressed)
  123.    Data Size:    5074784 Bytes = 4.8 MiB
  124.    Load Address: 00008000
  125.    Entry Point:  00008000
  126.    Verifying Checksum ... OK
  127.    Loading Kernel Image
  128.  
  129. Starting kernel ...
  130.  
  131. Uncompressing Linux... done, booting the kernel.
  132. [    0.000000][    T0] Booting Linux on physical CPU 0x0
  133. [    0.000000][    T0] Linux version 5.2.9-mvebu-tld-1 (root@tldDebianVM) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)) #1 SMP PREEMPT Mon Aug 19 12:47:39 PDT 2019
  134. [    0.000000][    T0] CPU: ARMv7 Processor [562f5842] revision 2 (ARMv7), cr=10c5387d
  135. [    0.000000][    T0] CPU: div instructions available: patching division code
  136. [    0.000000][    T0] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  137. [    0.000000][    T0] OF: fdt: Machine model: Synology DS414
  138. [    0.000000][    T0] printk: bootconsole [earlycon0] enabled
  139. [    0.000000][    T0] Memory policy: Data cache writealloc
  140. [    0.000000][    T0] percpu: Embedded 21 pages/cpu s55244 r8192 d22580 u86016
  141. [    0.000000][    T0] Built 1 zonelists, mobility grouping on.  Total pages: 260608
  142. [    0.000000][    T0] Kernel command line: console=ttyS0,115200 root=/dev/sda1 rootdelay=20 mtdparts=spi0.0:0x000d0000(u-boot),0x002d0000(zimage),0x00430000(rd),0x00010000(vendor),0x00010000(u-boot-envs),0x00010000(fis) earlyprintk=serial
  143. [    0.000000][    T0] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  144. [    0.000000][    T0] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  145. [    0.000000][    T0] Memory: 1023804K/1048576K available (10240K kernel code, 833K rwdata, 2724K rodata, 1024K init, 343K bss, 24772K reserved, 0K cma-reserved, 262144K highmem)
  146. [    0.000000][    T0] random: get_random_u32 called from cache_alloc_refill+0x30c/0x830 with crng_init=0
  147. [    0.000000][    T0] rcu: Preemptible hierarchical RCU implementation.
  148. [    0.000000][    T0] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  149. [    0.000000][    T0]  Tasks RCU enabled.
  150. [    0.000000][    T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  151. [    0.000000][    T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  152. [    0.000000][    T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  153. [    0.000000][    T0] L2C: DT/platform modifies aux control register: 0x1a096b00 -> 0x1a096b02
  154. [    0.000000][    T0] Aurora cache controller enabled, 16 ways, 1024 kB
  155. [    0.000000][    T0] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a096b02
  156. [    0.000000][    T0] Switching to timer-based delay loop, resolution 40ns
  157. [    0.000005][    T0] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
  158. [    0.008556][    T0] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
  159. [    0.020794][    T0] Console: colour dummy device 80x30
  160. [    0.025968][    T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
  161. [    0.037073][    T0] pid_max: default: 32768 minimum: 301
  162. [    0.042533][    T0] LSM: Security Framework initializing
  163. [    0.047920][    T0] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  164. [    0.055267][    T0] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  165. [    0.063494][    T0] *** VALIDATE proc ***
  166. [    0.067659][    T0] *** VALIDATE cgroup1 ***
  167. [    0.071958][    T0] *** VALIDATE cgroup2 ***
  168. [    0.076285][    T0] CPU: Testing write buffer coherency: ok
  169. [    0.082086][    T1] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  170. [    0.140232][    T1] Setting up static identity map for 0x100000 - 0x100060
  171. [    0.147381][    T1] mvebu-soc-id: MVEBU SoC ID=0x7823, Rev=0x2
  172. [    0.153363][    T1] mvebu-pmsu: Initializing Power Management Service Unit
  173. [    0.180196][    T1] rcu: Hierarchical SRCU implementation.
  174. [    0.220195][    T1] smp: Bringing up secondary CPUs ...
  175. [    0.280299][    T1] Booting CPU 1
  176. [    0.284041][    T0] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  177. [    0.294137][    T1] smp: Brought up 1 node, 2 CPUs
  178. [    0.305348][    T1] SMP: Total of 2 processors activated (100.00 BogoMIPS).
  179. [    0.312342][    T1] CPU: All CPU(s) started in SVC mode.
  180. [    0.318363][    T1] devtmpfs: initialized
  181. [    0.325715][    T1] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
  182. [    0.334571][    T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  183. [    0.345149][    T1] futex hash table entries: 512 (order: 3, 32768 bytes)
  184. [    0.352119][    T1] xor: measuring software checksum speed
  185. [    0.450184][    T1]    arm4regs  :  1290.800 MB/sec
  186. [    0.550185][    T1]    8regs     :   810.000 MB/sec
  187. [    0.650184][    T1]    32regs    :  1146.400 MB/sec
  188. [    0.655075][    T1] xor: using function: arm4regs (1290.800 MB/sec)
  189. [    0.661372][    T1] prandom: seed boundary self test passed
  190. [    0.669267][    T1] prandom: 100 self tests passed
  191. [    0.674081][    T1] pinctrl core: initialized pinctrl subsystem
  192. [    0.681361][    T1] NET: Registered protocol family 16
  193. [    0.686858][    T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
  194. [    0.695016][    T1] audit: initializing netlink subsys (disabled)
  195. [    0.701308][   T33] audit: type=2000 audit(0.680:1): state=initialized audit_enabled=0 res=1
  196. [    0.710233][    T1] cpuidle: using governor ladder
  197. [    0.715066][    T1] cpuidle: using governor menu
  198. [    0.719900][   T12] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
  199. [    0.729667][   T12] hw-breakpoint: CPU 0 failed to disable vector catch
  200. [    0.736359][   T13] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1
  201. [    0.950213][    T1] raid6: int32x8  gen()   227 MB/s
  202. [    1.120331][    T1] raid6: int32x8  xor()   134 MB/s
  203. [    1.290420][    T1] raid6: int32x4  gen()   206 MB/s
  204. [    1.460265][    T1] raid6: int32x4  xor()   163 MB/s
  205. [    1.630396][    T1] raid6: int32x2  gen()   197 MB/s
  206. [    1.800217][    T1] raid6: int32x2  xor()   210 MB/s
  207. [    1.970262][    T1] raid6: int32x1  gen()   135 MB/s
  208. [    2.140298][    T1] raid6: int32x1  xor()   181 MB/s
  209. [    2.145278][    T1] raid6: using algorithm int32x8 gen() 227 MB/s
  210. [    2.151400][    T1] raid6: .... xor() 134 MB/s, rmw enabled
  211. [    2.156986][    T1] raid6: using intx1 recovery algorithm
  212. [    2.163228][    T1] vgaarb: loaded
  213. [    2.167011][    T1] SCSI subsystem initialized
  214. [    2.171878][    T1] usbcore: registered new interface driver usbfs
  215. [    2.178116][    T1] usbcore: registered new interface driver hub
  216. [    2.184304][    T1] usbcore: registered new device driver usb
  217. [    2.190315][    T1] media: Linux media interface: v0.10
  218. [    2.195588][    T1] videodev: Linux video capture interface: v2.00
  219. [    2.201889][    T1] pps_core: LinuxPPS API ver. 1 registered
  220. [    2.207564][    T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  221. [    2.217466][    T1] PTP clock support registered
  222. [    2.231330][    T1] clocksource: Switched to clocksource armada_370_xp_clocksource
  223. [    2.783938][    T1] VFS: Disk quotas dquot_6.6.0
  224. [    2.788624][    T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  225. [    2.806367][    T1] NET: Registered protocol family 2
  226. [    2.812098][    T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  227. [    2.820486][    T1] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  228. [    2.828338][    T1] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  229. [    2.835712][    T1] TCP: Hash tables configured (established 8192 bind 8192)
  230. [    2.843089][    T1] UDP hash table entries: 512 (order: 2, 16384 bytes)
  231. [    2.849739][    T1] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  232. [    2.857041][    T1] NET: Registered protocol family 1
  233. [    2.862667][    T1] RPC: Registered named UNIX socket transport module.
  234. [    2.869301][    T1] RPC: Registered udp transport module.
  235. [    2.874741][    T1] RPC: Registered tcp transport module.
  236. [    2.880154][    T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
  237. [    2.887338][    T1] PCI: CLS 0 bytes, default 64
  238. [    2.892322][    T1] NetWinder Floating Point Emulator V0.97 (double precision)
  239. [    2.899784][    T1] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  240. [    2.909984][    T1] Initialise system trusted keyrings
  241. [    2.915261][    T1] Key type blacklist registered
  242. [    2.920110][    T1] workingset: timestamp_bits=30 max_order=18 bucket_order=0
  243. [    2.927431][    T1] zbud: loaded
  244. [    2.931378][    T1] NFS: Registering the id_resolver key type
  245. [    2.937158][    T1] Key type id_resolver registered
  246. [    2.942068][    T1] Key type id_legacy registered
  247. [    2.946794][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  248. [    2.954254][    T1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  249. [    2.961565][    T1] jffs2: version 2.2. (NAND) (SUMMARY)   © 2001-2006 Red Hat, Inc.
  250. [    2.969707][    T1] orangefs_debugfs_init: called with debug mask: :none: :0:
  251. [    2.977018][    T1] orangefs_init: module version upstream loaded
  252. [    2.984845][    T1] async_tx: api initialized (async)
  253. [    2.989915][    T1] Key type asymmetric registered
  254. [    2.994747][    T1] Asymmetric key parser 'x509' registered
  255. [    3.000373][    T1] bounce: pool size: 64 pages
  256. [    3.004971][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  257. [    3.014878][    T1] armada-xp-pinctrl f1018000.pin-ctrl: registered pinctrl driver
  258. [    3.024575][    T1] mvebu-pcie soc:pcie@82000000: PCI host bridge to bus 0000:00
  259. [    3.032107][    T1] pci_bus 0000:00: root bus resource [bus 00-ff]
  260. [    3.038308][    T1] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xffdfffff]
  261. [    3.045924][    T1] pci_bus 0000:00: root bus resource [io  0x1000-0xeffff]
  262. [    3.053015][    T1] pci 0000:00:01.0: [11ab:7823] type 01 class 0x060400
  263. [    3.059757][    T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
  264. [    3.067551][    T1] pci 0000:00:05.0: [11ab:7823] type 01 class 0x060400
  265. [    3.074308][    T1] pci 0000:00:05.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
  266. [    3.082841][    T1] PCI: bus0: Fast back to back transfers disabled
  267. [    3.089137][    T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  268. [    3.097891][    T1] pci 0000:00:05.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  269. [    3.106762][    T1] pci 0000:01:00.0: [11ab:7042] type 00 class 0x010000
  270. [    3.113528][    T1] pci 0000:01:00.0: reg 0x10: [mem 0x14000000-0x140fffff 64bit]
  271. [    3.121039][    T1] pci 0000:01:00.0: reg 0x18: [io  0x0000-0x00ff]
  272. [    3.127584][    T1] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
  273. [    3.139424][    T1] PCI: bus1: Fast back to back transfers disabled
  274. [    3.145770][    T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  275. [    3.153256][    T1] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
  276. [    3.160006][    T1] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
  277. [    3.167575][    T1] pci 0000:02:00.0: enabling Extended Tags
  278. [    3.173333][    T1] pci 0000:02:00.0: supports D1 D2
  279. [    3.178314][    T1] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
  280. [    3.185256][    T1] pci 0000:00:05.0: ASPM: current common clock configuration is broken, reconfiguring
  281. [    3.222440][    T1] PCI: bus2: Fast back to back transfers disabled
  282. [    3.228735][    T1] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
  283. [    3.236137][    T1] pci 0000:00:01.0: BAR 14: assigned [mem 0xf8000000-0xf80fffff]
  284. [    3.243750][    T1] pci 0000:00:05.0: BAR 14: assigned [mem 0xf8100000-0xf81fffff]
  285. [    3.251356][    T1] pci 0000:00:01.0: BAR 13: assigned [io  0x10000-0x10fff]
  286. [    3.258427][    T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xf8200000-0xf82007ff pref]
  287. [    3.266381][    T1] pci 0000:00:05.0: BAR 6: assigned [mem 0xf8300000-0xf83007ff pref]
  288. [    3.274337][    T1] pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf80fffff 64bit]
  289. [    3.282385][    T1] pci 0000:01:00.0: BAR 2: assigned [io  0x10000-0x100ff]
  290. [    3.289370][    T1] pci 0000:00:01.0: PCI bridge to [bus 01]
  291. [    3.295059][    T1] pci 0000:00:01.0:   bridge window [io  0x10000-0x10fff]
  292. [    3.302056][    T1] pci 0000:00:01.0:   bridge window [mem 0xf8000000-0xf80fffff]
  293. [    3.309567][    T1] pci 0000:02:00.0: BAR 0: assigned [mem 0xf8100000-0xf8107fff 64bit]
  294. [    3.317614][    T1] pci 0000:00:05.0: PCI bridge to [bus 02]
  295. [    3.323305][    T1] pci 0000:00:05.0:   bridge window [mem 0xf8100000-0xf81fffff]
  296. [    3.330889][    T1] pcieport 0000:00:01.0: enabling device (0140 -> 0143)
  297. [    3.337809][    T1] pcieport 0000:00:05.0: enabling device (0140 -> 0142)
  298. [    3.344697][    T1] pci 0000:02:00.0: enabling device (0140 -> 0142)
  299. [    3.351562][    T1] mv_xor f1060900.xor: Marvell shared XOR driver
  300. [    3.412031][    T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
  301. [    3.421831][    T1] mv_xor f10f0900.xor: Marvell shared XOR driver
  302. [    3.482024][    T1] mv_xor f10f0900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
  303. [    3.552277][    T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  304. [    3.561226][    T1] printk: console [ttyS0] disabled
  305. [    3.587101][    T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 19, base_baud = 15625000) is a 16550A
  306. [    3.596859][    T1] printk: console [ttyS0] enabled
  307. [    3.596859][    T1] printk: console [ttyS0] enabled
  308. [    3.606659][    T1] printk: bootconsole [earlycon0] disabled
  309. [    3.606659][    T1] printk: bootconsole [earlycon0] disabled
  310. [    3.639056][    T1] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 20, base_baud = 15625000) is a 16550A
  311. [    3.650598][    T1] sata_mv 0000:01:00.0: enabling device (0140 -> 0143)
  312. [    3.657459][    T1] sata_mv 0000:01:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
  313. [    3.668471][    T1] scsi host0: sata_mv
  314. [    3.672917][    T1] scsi host1: sata_mv
  315. [    3.677290][    T1] scsi host2: sata_mv
  316. [    3.681706][    T1] scsi host3: sata_mv
  317. [    3.685903][    T1] ata1: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8022000 irq 41
  318. [    3.694305][    T1] ata2: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8024000 irq 41
  319. [    3.702701][    T1] ata3: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8026000 irq 41
  320. [    3.711077][    T1] ata4: SATA max UDMA/133 mmio m1048576@0xf8000000 port 0xf8028000 irq 41
  321. [    3.721369][    T1] m25p80 spi0.0: n25q064 (8192 Kbytes)
  322. [    3.726715][    T1] 6 cmdlinepart partitions found on MTD device spi0.0
  323. [    3.733365][    T1] Creating 6 MTD partitions on "spi0.0":
  324. [    3.738870][    T1] 0x000000000000-0x0000000d0000 : "u-boot"
  325. [    3.745639][    T1] 0x0000000d0000-0x0000003a0000 : "zimage"
  326. [    3.752341][    T1] 0x0000003a0000-0x0000007d0000 : "rd"
  327. [    3.758652][    T1] 0x0000007d0000-0x0000007e0000 : "vendor"
  328. [    3.765358][    T1] 0x0000007e0000-0x0000007f0000 : "u-boot-envs"
  329. [    3.772490][    T1] 0x0000007f0000-0x000000800000 : "fis"
  330. [    3.779849][    T1] libphy: Fixed MDIO Bus: probed
  331. [    3.785302][    T1] libphy: orion_mdio_bus: probed
  332. [    3.793131][    T1] mvneta f1070000.ethernet eth0: Using hardware mac address b2:c8:c9:8b:d1:6a
  333. [    3.803341][    T1] mvneta f1074000.ethernet eth1: Using hardware mac address ca:95:76:ca:f1:f7
  334. [    3.812402][    T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  335. [    3.819671][    T1] ehci-pci: EHCI PCI platform driver
  336. [    3.824930][    T1] ehci-orion: EHCI orion driver
  337. [    3.829786][    T1] orion-ehci f1050000.usb: EHCI Host Controller
  338. [    3.835943][    T1] orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1
  339. [    3.844331][    T1] orion-ehci f1050000.usb: irq 26, io mem 0xf1050000
  340. [    3.871350][    T1] orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00
  341. [    3.878206][    T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
  342. [    3.887221][    T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  343. [    3.895179][    T1] usb usb1: Product: EHCI Host Controller
  344. [    3.900770][    T1] usb usb1: Manufacturer: Linux 5.2.9-mvebu-tld-1 ehci_hcd
  345. [    3.907852][    T1] usb usb1: SerialNumber: f1050000.usb
  346. [    3.913655][    T1] hub 1-0:1.0: USB hub found
  347. [    3.918148][    T1] hub 1-0:1.0: 1 port detected
  348. [    3.923429][    T1] xhci_hcd 0000:02:00.0: xHCI Host Controller
  349. [    3.929382][    T1] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
  350. [    3.937624][    T1] xhci_hcd 0000:02:00.0: hcc params 0x040040a5 hci version 0x100 quirks 0x0000000000080490
  351. [    3.947965][    T1] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
  352. [    3.956978][    T1] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  353. [    3.964936][    T1] usb usb2: Product: xHCI Host Controller
  354. [    3.970526][    T1] usb usb2: Manufacturer: Linux 5.2.9-mvebu-tld-1 xhci-hcd
  355. [    3.977641][    T1] usb usb2: SerialNumber: 0000:02:00.0
  356. [    3.983399][    T1] hub 2-0:1.0: USB hub found
  357. [    3.987894][    T1] hub 2-0:1.0: 2 ports detected
  358. [    3.993027][    T1] xhci_hcd 0000:02:00.0: xHCI Host Controller
  359. [    3.998977][    T1] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
  360. [    4.007134][    T1] xhci_hcd 0000:02:00.0: Host supports USB 3.0 SuperSpeed
  361. [    4.014207][    T1] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  362. [    4.023161][    T1] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
  363. [    4.032253][    T1] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  364. [    4.040196][    T1] usb usb3: Product: xHCI Host Controller
  365. [    4.042847][ T1221] ata1: SATA link down (SStatus 0 SControl 300)
  366. [    4.045808][    T1] usb usb3: Manufacturer: Linux 5.2.9-mvebu-tld-1 xhci-hcd
  367. [    4.059012][    T1] usb usb3: SerialNumber: 0000:02:00.0
  368. [    4.064886][    T1] hub 3-0:1.0: USB hub found
  369. [    4.069389][    T1] hub 3-0:1.0: 2 ports detected
  370. [    4.075270][    T1] usbcore: registered new interface driver usblp
  371. [    4.081656][    T1] usbcore: registered new interface driver usb-storage
  372. [    4.088824][    T1] mousedev: PS/2 mouse device common for all mice
  373. [    4.096149][    T1] i2c /dev entries driver
  374. [    4.104419][    T1] rtc-s35390a 0-0030: registered as rtc0
  375. [    4.212639][    T1] watchdog: f1020300.watchdog: driver supplied timeout (4294967295) out of range
  376. [    4.221742][    T1] watchdog: f1020300.watchdog: falling back to default timeout (171)
  377. [    4.230050][    T1] orion_wdt: Initial timeout 171 sec
  378. [    4.235803][    T1] device-mapper: uevent: version 1.0.3
  379. [    4.241385][    T1] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
  380. [    4.250847][    T1] device-mapper: multipath round-robin: version 1.2.0 loaded
  381. [    4.258122][    T1] device-mapper: multipath queue-length: version 0.2.0 loaded
  382. [    4.265468][    T1] device-mapper: multipath service-time: version 0.3.0 loaded
  383. [    4.272841][    T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
  384. [    4.279650][    T1] device-mapper: raid: Loading target version 1.14.0
  385. [    4.291375][ T1412] usb 1-1: new high-speed USB device number 2 using orion-ehci
  386. [    4.298979][    T1] marvell-cesa f1090000.crypto: CESA device successfully registered
  387. [    4.307277][    T1] hidraw: raw HID events driver (C) Jiri Kosina
  388. [    4.314075][    T1] usbcore: registered new interface driver usbhid
  389. [    4.320393][    T1] usbhid: USB HID core driver
  390. [    4.325465][    T1] drop_monitor: Initializing network drop monitor service
  391. [    4.332838][    T1] NET: Registered protocol family 10
  392. [    4.338911][    T1] Segment Routing with IPv6
  393. [    4.343424][    T1] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  394. [    4.351488][    T1] NET: Registered protocol family 17
  395. [    4.356837][    T1] 8021q: 802.1Q VLAN Support v1.8
  396. [    4.361821][    T1] Key type dns_resolver registered
  397. [    4.367012][    T1] ThumbEE CPU extension supported.
  398. [    4.372062][    T1] Registering SWP/SWPB emulation handler
  399. [    4.378414][    T1] registered taskstats version 1
  400. [    4.383296][ T1225] ata2: SATA link down (SStatus 0 SControl 300)
  401. [    4.389462][    T1] Loading compiled-in X.509 certificates
  402. [    4.395048][    T1] zswap: loaded using pool lzo/zbud
  403. [    4.402740][    T1] Key type big_key registered
  404. [    4.407948][    T1] Key type encrypted registered
  405. [    4.513468][ T1412] usb 1-1: New USB device found, idVendor=18a5, idProduct=0240, bcdDevice= 1.00
  406. [    4.522399][ T1412] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  407. [    4.530270][ T1412] usb 1-1: Product: STORE N GO
  408. [    4.534941][ T1412] usb 1-1: Manufacturer: Verbatim
  409. [    4.539836][ T1412] usb 1-1: SerialNumber: 07B21107CD4F328B
  410. [    4.546094][ T1412] usb-storage 1-1:1.0: USB Mass Storage device detected
  411. [    4.553404][ T1412] scsi host4: usb-storage 1-1:1.0
  412. [    4.733207][ T1229] ata3: SATA link down (SStatus 0 SControl 300)
  413. [    5.064079][ T1233] ata4: SATA link down (SStatus 0 SControl 300)
  414. [    5.623055][ T1237] scsi 4:0:0:0: Direct-Access     Verbatim STORE N GO       PMAP PQ: 0 ANSI: 0 CCS
  415. [    5.635211][ T1238] sd 4:0:0:0: [sda] 15646720 512-byte logical blocks: (8.01 GB/7.46 GiB)
  416. [    5.644376][ T1238] sd 4:0:0:0: [sda] Write Protect is off
  417. [    5.650399][ T1238] sd 4:0:0:0: [sda] No Caching mode page found
  418. [    5.656503][ T1238] sd 4:0:0:0: [sda] Assuming drive cache: write through
  419. [    5.668118][ T1238]  sda: sda1
  420. [    5.674822][ T1238] sd 4:0:0:0: [sda] Attached SCSI removable disk
  421. [   25.463603][    T1] rtc-s35390a 0-0030: setting system clock to 2020-04-15T10:10:33 UTC (1586945433)
  422. [   25.473534][    T1] Waiting 20 sec before mounting root device...
  423. [   45.941508][    T1] md: Waiting for all devices to be available before autodetect
  424. [   45.949023][    T1] md: If you don't use raid, use raid=noautodetect
  425. [   45.956583][    T1] md: Autodetecting RAID arrays.
  426. [   45.961459][    T1] md: autorun ...
  427. [   45.964969][    T1] md: ... autorun DONE.
  428. [   45.996542][    T1] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
  429. [   46.004512][    T1] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
  430. [   46.018054][    C0] random: fast init done
  431. [   46.038589][    T1] devtmpfs: mounted
  432. [   46.044179][    T1] Freeing unused kernel memory: 1024K
  433. [   46.063009][    T1] Checked W+X mappings: passed, no W+X pages found
  434. [   46.069402][    T1] Run /sbin/init as init process
  435. INIT: version 2.93 booting
  436. [info] Using makefile-style concurrent boot in runlevel S.
  437. ERROR: could not open /proc/stat: No such file or directory
  438. [warn] Files under mount point '/run' will be hidden. ... (warning).
  439. [ ok ] Starting hotplug events dispatcher: systemd-udevd.
  440. [ ok ] Synthesizing the initial hotplug events (subsystems)...done.
  441. [ ok ] Synthesizing the initial hotplug events (devices)...done.
  442. [....] Waiting for /dev to be fully populated...[   49.467370][ T1733] systemd-udevd[1733]: Using default interface naming scheme 'v240'.
  443. [   49.469642][ T1731] systemd-udevd[1731]: Using default interface naming scheme 'v240'.
  444. [   49.553681][ T1733] systemd-udevd[1733]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
  445. [   49.569229][ T1731] systemd-udevd[1731]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
  446. [   49.641312][ T1732] systemd-udevd[1732]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
  447. [   49.641634][ T1730] systemd-udevd[1730]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
  448. [   49.653768][ T1732] systemd-udevd[1732]: Could not generate persistent MAC address for ip6tnl0: No such file or directory
  449. [   49.680005][ T1735] systemd-udevd[1735]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
  450. [   49.839683][ T1729] usbcore: registered new interface driver uas
  451. [   49.995442][ T1729] sd 4:0:0:0: Attached scsi generic sg0 type 0
  452. done.
  453. [ ok ] Setting hostname to 'debian'...done.
  454. [ ok ] Activating swap:.
  455. [   60.806692][ T1944] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
  456. [   61.458031][ T1944] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
  457. [info] Will now check all file systems.
  458. fsck from util-linux 2.33.1
  459. Checking all file systems.
  460. [ ok ] Done checking file systems. A log is being saved in /var/log/fsck/checkfs if that location is writable..
  461. [ ok ] Cleaning up temporary files...[....] Cleaning /tmp...done.
  462. [ ok .
  463. [   62.878764][    C0] random: crng init done
  464. [ ok ] Will now mount local filesystems:.
  465. [ ok ] Will now activate swapfile swap:done.
  466. [ ok ] Checking minimum space in /tmp...done.
  467. [ ok ] Cleaning up temporary files....
  468. [ ok ] Starting Setting kernel variables: sysctl.
  469. [ ok ] Initializing random number generator...done.
  470. [....] Configuring network interfaces...[   64.854992][ T2470] mvneta f1070000.ethernet eth0: PHY [f1072004.mdio-mii:01] driver [Marvell 88E1510]
  471. [   64.864803][ T2470] mvneta f1070000.ethernet eth0: configuring for phy/rgmii-id link mode
  472. [   70.102398][   T49] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  473. [   70.110980][   T49] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  474. done.
  475. [ ok ] Starting RPC port mapper daemon: rpcbind.
  476. [ ok ] Starting NFS common utilities: statd idmapd.
  477. [ ok ] Cleaning up temporary files....
  478. INIT: Entering runlevel: 2
  479. [info] Using makefile-style concurrent boot in runlevel 2.
  480. [....] Starting busybox' syslogd implementation : syslogdStarting /sbin/syslogd...
  481. 2696 (syslogd)
  482. . ok
  483. [....] Starting busybox' klogd implementation : klogdStarting /sbin/klogd...
  484. 2723 (klogd)
  485. . ok
  486. [warn] Not starting NFS kernel daemon: no exports. ... (warning).
  487. [ ok ] Starting periodic command scheduler: cron.
  488. [ ok ] Starting system message bus: dbus.
  489. [ ok ] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
  490. [ ok ] Starting NTP server: ntpd.
  491. [ ok ] Starting OpenBSD Secure Shell server: sshd.
  492. [....] Running local boot scripts (/etc/rc.local)Warning: Bad CRC, using default environment
  493. Warning: Bad CRC, using default environment
  494. [   78.139100][ T2930] Setting Persistent MAC address to 00:00:11:22:33:44
  495. <13>Apr 15 03:11:26 root[2937]: Setting Persistent MAC address to 00:00:11:22:33:44
  496. [   78.238872][ T1529] mvneta f1070000.ethernet eth0: Link is Down
  497. [   78.393554][ T2970] mvneta f1070000.ethernet eth0: PHY [f1072004.mdio-mii:01] driver [Marvell 88E1510]
  498. [   78.403294][ T2970] mvneta f1070000.ethernet eth0: configuring for phy/rgmii-id link mode
  499. [   82.585618][ T1529] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  500. [   82.594204][ T1529] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  501. . ok
  502.  
  503. Debian GNU/Linux 10 debian ttyS0
  504.  
  505. debian login: root
  506. Password:
  507. Last login: Wed Apr 15 03:07:55 PDT 2020 on ttyS0
  508. Linux debian 5.2.9-mvebu-tld-1 #1 SMP PREEMPT Mon Aug 19 12:47:39 PDT 2019 armv7l
  509.  
  510. The programs included with the Debian GNU/Linux system are free software;
  511. the exact distribution terms for each program are described in the
  512. individual files in /usr/share/doc/*/copyright.
  513.  
  514. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
  515. permitted by applicable law.
  516. debian
  517. 192.168.0.37
  518. Synology DS414
  519. Linux version 5.2.9-mvebu-tld-1 (root@tldDebianVM) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04.1)) #1 SMP PREEMPT Mon Aug 19 12:47:39 PDT 2019
  520. Debian 10.0
  521. Wed Apr 15 03:11:35 PDT 2020 up 1 minute
  522. root@debian:~# cat /proc/mtd
  523. dev:    size   erasesize  name
  524. mtd0: 000d0000 00001000 "u-boot"
  525. mtd1: 002d0000 00001000 "zimage"
  526. mtd2: 00430000 00001000 "rd"
  527. mtd3: 00010000 00001000 "vendor"
  528. mtd4: 00010000 00001000 "u-boot-envs"
  529. mtd5: 00010000 00001000 "fis"
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top