Advertisement
Infra_HDC

for-cyberlink-20190221-001 -- ST2000NM0033-9ZM175_S1X02B7J_2

Feb 21st, 2019
316
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 4.99 KB | None | 0 0
  1. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-8-amd64] (local build)
  2. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate Constellation ES.3
  6. Device Model: ST2000NM0033-9ZM175
  7. Serial Number: S1X02B7J
  8. LU WWN Device Id: 5 000c50 07455abcb
  9. Firmware Version: SN03
  10. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  11. Sector Size: 512 bytes logical/physical
  12. Rotation Rate: 7200 rpm
  13. Form Factor: 3.5 inches
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ACS-2 (minor revision not indicated)
  16. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Thu Feb 21 11:40:37 2019 MSK
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x82) Offline data collection activity
  26. was completed without error.
  27. Auto Offline Data Collection: Enabled.
  28. Self-test execution status: ( 0) The previous self-test routine completed
  29. without error or no self-test has ever
  30. been run.
  31. Total time to complete Offline
  32. data collection: ( 592) seconds.
  33. Offline data collection
  34. capabilities: (0x7b) SMART execute Offline immediate.
  35. Auto Offline data collection on/off support.
  36. Suspend Offline collection upon new
  37. command.
  38. Offline surface scan supported.
  39. Self-test supported.
  40. Conveyance Self-test supported.
  41. Selective Self-test supported.
  42. SMART capabilities: (0x0003) Saves SMART data before entering
  43. power-saving mode.
  44. Supports SMART auto save timer.
  45. Error logging capability: (0x01) Error logging supported.
  46. General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time: ( 1) minutes.
  49. Extended self-test routine
  50. recommended polling time: ( 244) minutes.
  51. Conveyance self-test routine
  52. recommended polling time: ( 2) minutes.
  53. SCT capabilities: (0x50bd) SCT Status supported.
  54. SCT Error Recovery Control supported.
  55. SCT Feature Control supported.
  56. SCT Data Table supported.
  57.  
  58. SMART Attributes Data Structure revision number: 10
  59. Vendor Specific SMART Attributes with Thresholds:
  60. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  61. 1 Raw_Read_Error_Rate 0x000f 082 063 044 Pre-fail Always - 196643012
  62. 3 Spin_Up_Time 0x0003 096 095 000 Pre-fail Always - 0
  63. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 156
  64. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  65. 7 Seek_Error_Rate 0x000f 092 060 030 Pre-fail Always - 1832353930
  66. 9 Power_On_Hours 0x0032 075 075 000 Old_age Always - 21953
  67. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  68. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 150
  69. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  70. 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
  71. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
  72. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  73. 190 Airflow_Temperature_Cel 0x0022 063 054 045 Old_age Always - 37 (0 1 37 35 0)
  74. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  75. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 52
  76. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1034
  77. 194 Temperature_Celsius 0x0022 037 046 000 Old_age Always - 37 (128 0 0 0 0)
  78. 195 Hardware_ECC_Recovered 0x001a 037 005 000 Old_age Always - 196643012
  79. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  80. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  81. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  82.  
  83. SMART Error Log Version: 1
  84. No Errors Logged
  85.  
  86. SMART Self-test log structure revision number 1
  87. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  88.  
  89. SMART Selective self-test log data structure revision number 1
  90. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  91. 1 0 0 Not_testing
  92. 2 0 0 Not_testing
  93. 3 0 0 Not_testing
  94. 4 0 0 Not_testing
  95. 5 0 0 Not_testing
  96. Selective self-test flags (0x0):
  97. After scanning selected spans, do NOT read-scan remainder of disk.
  98. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement