SHARE
TWEET

RPI2 SD boot issue

a guest Feb 6th, 2015 667 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.246596] hw-breakpoint: maximum watchpoint size is 8 bytes.
  2. [    0.246658] mailbox: Broadcom VideoCore Mailbox driver
  3. [    0.246790] bcm2708_vcio: mailbox at f300b880
  4. [    0.246899] bcm_power: Broadcom power driver
  5. [    0.246937] bcm_power_open() -> 0
  6. [    0.246965] bcm_power_request(0, 8)
  7. [    0.747679] bcm_mailbox_read -> 00000080, 0
  8. [    0.747711] bcm_power_request -> 0
  9. [    0.747866] Serial: AMBA PL011 UART driver
  10. [    0.748034] dev:f1: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev3
  11. [    1.272553] console [ttyAMA0] enabled
  12. [    1.346715] SCSI subsystem initialized
  13. [    1.350738] usbcore: registered new interface driver usbfs
  14. [    1.356406] usbcore: registered new interface driver hub
  15. [    1.361866] usbcore: registered new device driver usb
  16. [    1.368819] Switched to clocksource arch_sys_counter
  17. [    1.403339] FS-Cache: Loaded
  18. [    1.406591] CacheFiles: Loaded
  19. [    1.422033] NET: Registered protocol family 2
  20. [    1.427657] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  21. [    1.434898] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  22. [    1.441590] TCP: Hash tables configured (established 8192 bind 8192)
  23. [    1.448063] TCP: reno registered
  24. [    1.451329] UDP hash table entries: 512 (order: 2, 16384 bytes)
  25. [    1.457314] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  26. [    1.464067] NET: Registered protocol family 1
  27. [    1.468908] RPC: Registered named UNIX socket transport module.
  28. [    1.474850] RPC: Registered udp transport module.
  29. [    1.479639] RPC: Registered tcp transport module.
  30. [    1.484357] RPC: Registered tcp NFSv4.1 backchannel transport module.
  31. [    1.491847] bcm2708_dma: DMA manager at f3007000
  32. [    1.496649] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  33. [    1.506656] futex hash table entries: 1024 (order: 4, 65536 bytes)
  34. [    1.513160] audit: initializing netlink subsys (disabled)
  35. [    1.518634] audit: type=2000 audit(1.299:1): initialized
  36. [    1.540390] VFS: Disk quotas dquot_6.5.2
  37. [    1.544707] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  38. [    1.554378] FS-Cache: Netfs 'nfs' registered for caching
  39. [    1.560719] NFS: Registering the id_resolver key type
  40. [    1.565842] Key type id_resolver registered
  41. [    1.570095] Key type id_legacy registered
  42. [    1.575211] msgmni has been set to 1488
  43. [    1.580789] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  44. [    1.588406] io scheduler noop registered
  45. [    1.592387] io scheduler deadline registered (default)
  46. [    1.597865] io scheduler cfq registered
  47. [    1.604358] BCM2708FB: allocated DMA memory ef400000
  48. [    1.609416] BCM2708FB: allocated DMA channel 0 @ f3007000
  49. [    1.621282] Console: switching to colour frame buffer device 82x26
  50. [    1.633620] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
  51. [    1.642942] uart-pl011 dev:f1: no DMA platform data
  52. [    1.650044] vc-cma: Videocore CMA driver
  53. [    1.655549] vc-cma: vc_cma_base      = 0x00000000
  54. [    1.661831] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
  55. [    1.668759] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
  56. [    1.687398] brd: module loaded
  57. [    1.698036] loop: module loaded
  58. [    1.702975] vchiq: vchiq_init_state: slot_zero = 0xef000000, is_master = 0
  59. [    1.712101] Loading iSCSI transport class v2.0-870.
  60. [    1.719415] usbcore: registered new interface driver smsc95xx
  61. [    1.726735] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  62. [    1.934363] Core Release: 2.80a
  63. [    1.939009] Setting default values for core params
  64. [    1.945282] Finished setting default values for core params
  65. [    2.152756] Using Buffer DMA mode
  66. [    2.157539] Periodic Transfer Interrupt Enhancement - disabled
  67. [    2.164911] Multiprocessor Interrupt Enhancement - disabled
  68. [    2.172032] OTG VER PARAM: 0, OTG VER FLAG: 0
  69. [    2.177943] Dedicated Tx FIFOs mode
  70. [    2.183284] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xef414000 dma = 0xef414000 len=9024
  71. [    2.196231] FIQ FSM acceleration enabled for :
  72. [    2.196231] Non-periodic Split Transactions
  73. [    2.196231] Periodic Split Transactions
  74. [    2.196231] High-Speed Isochronous Endpoints
  75. [    2.219182] WARN::hcd_init_fiq:412: FIQ on core 1 at 0xc03e3cb8
  76. [    2.226729] WARN::hcd_init_fiq:413: FIQ ASM at 0xc03e4014 length 36
  77. [    2.234638] WARN::hcd_init_fiq:438: MPHI regs_base at 0xf0006000
  78. [    2.242271] dwc_otg bcm2708_usb: DWC OTG Controller
  79. [    2.248753] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  80. [    2.257629] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  81. [    2.264743] Init: Port Power? op_state=1
  82. [    2.270218] Init: Power Port (0)
  83. [    2.275245] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  84. [    2.283641] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  85. [    2.292452] usb usb1: Product: DWC OTG Controller
  86. [    2.298700] usb usb1: Manufacturer: Linux 3.18.5-v7+ dwc_otg_hcd
  87. [    2.306271] usb usb1: SerialNumber: bcm2708_usb
  88. [    2.313341] hub 1-0:1.0: USB hub found
  89. [    2.318664] hub 1-0:1.0: 1 port detected
  90. [    2.325033] usbcore: registered new interface driver usb-storage
  91. [    2.332822] mousedev: PS/2 mouse device common for all mice
  92. [    2.340595] bcm2835-cpufreq: min=600000 max=900000
  93. [    2.347207] sdhci: Secure Digital Host Controller Interface driver
  94. [    2.354941] sdhci: Copyright(c) Pierre Ossman
  95. [    2.361028] DMA channels allocated for the MMC driver
  96. [    2.398857] Load BCM2835 MMC driver
  97. [    2.405683] sdhci-pltfm: SDHCI platform and OF driver helper
  98. [    2.413602] ledtrig-cpu: registered to indicate activity on CPUs
  99. [    2.425706] hidraw: raw HID events driver (C) Jiri Kosina
  100. [    2.433011] usbcore: registered new interface driver usbhid
  101. [    2.440262] usbhid: USB HID core driver
  102. [    2.448093] TCP: cubic registered
  103. [    2.454076] Initializing XFRM netlink socket
  104. [    2.459994] NET: Registered protocol family 17
  105. [    2.468936] Key type dns_resolver registered
  106. [    2.475115] Registering SWP/SWPB emulation handler
  107. [    2.482377] registered taskstats version 1
  108. [    2.488207] vc-sm: Videocore shared memory driver
  109. [    2.494432] [vc_sm_connected_init]: start
  110. [    2.496225] mmc0: host does not support reading read-only switch, assuming write-enable
  111. [    2.498353] mmc0: new high speed SDHC card at address 59b4
  112. [    2.499010] mmcblk0: mmc0:59b4 USDU1 29.4 GiB
  113. [    2.509967]  mmcblk0: p1 p2
  114. [    2.528531] Indeed it is in host mode hprt0 = 00021501
  115. [    2.535836] [vc_sm_connected_init]: end - returning 0
  116. [    2.582119] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  117. [    2.593454] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  118. [    2.603103] devtmpfs: mounted
  119. [    2.608417] Freeing unused kernel memory: 396K (c0767000 - c07ca000)
  120. [    2.708968] usb 1-1: new high-speed USB device number 2 using dwc_otg
  121. [    2.717446] Indeed it is in host mode hprt0 = 00001101
  122. [    2.919222] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  123. [    2.927821] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  124. [    2.937844] hub 1-1:1.0: USB hub found
  125. [    2.943610] hub 1-1:1.0: 5 ports detected
  126. [    3.229129] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  127. [    3.349376] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  128. [    3.358155] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  129. [    3.374549] smsc95xx v1.0.4
  130. [    3.444099] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, (##mac address hidden##)
  131. [    3.745514] udevd[174]: starting version 175
  132. [   14.248819] mmc0: Timeout waiting for hardware interrupt.
  133. [   14.257997] mmcblk0: error -110 transferring data, sector 190408, nr 8, cmd response 0x900, card status 0xb00
  134. [   14.271720] mmcblk0: retrying using single block read
  135. [   14.293761] mmc0: Controller never released inhibit bit(s).
  136. [   14.301370] ------------[ cut here ]------------
  137. [   14.307885] WARNING: CPU: 1 PID: 51 at drivers/mmc/host/bcm2835-mmc.c:476 bcm2835_mmc_transfer_dma+0x1a8/0x1e0()
  138. [   14.321996] Modules linked in: uio_pdrv_genirq uio
  139. [   14.328850] CPU: 1 PID: 51 Comm: mmcqd/0 Not tainted 3.18.5-v7+ #225
  140. [   14.337217] [<c0016d14>] (unwind_backtrace) from [<c0012c40>] (show_stack+0x20/0x24)
  141. [   14.348958] [<c0012c40>] (show_stack) from [<c052ea44>] (dump_stack+0x98/0xd8)
  142. [   14.358272] [<c052ea44>] (dump_stack) from [<c00251e8>] (warn_slowpath_common+0x7c/0xa0)
  143. [   14.370388] [<c00251e8>] (warn_slowpath_common) from [<c00252c8>] (warn_slowpath_null+0x2c/0x34)
  144. [   14.383216] [<c00252c8>] (warn_slowpath_null) from [<c041db10>] (bcm2835_mmc_transfer_dma+0x1a8/0x1e0)
  145. [   14.396772] [<c041db10>] (bcm2835_mmc_transfer_dma) from [<c041eb9c>] (bcm2835_mmc_request+0xa8/0xc0)
  146. [   14.410288] [<c041eb9c>] (bcm2835_mmc_request) from [<c0406d9c>] (mmc_start_request+0xd4/0xf8)
  147. [   14.423173] [<c0406d9c>] (mmc_start_request) from [<c0407b8c>] (mmc_start_req+0x2a8/0x37c)
  148. [   14.435809] [<c0407b8c>] (mmc_start_req) from [<c04166c0>] (mmc_blk_issue_rw_rq+0xc8/0xafc)
  149. [   14.448659] [<c04166c0>] (mmc_blk_issue_rw_rq) from [<c04171f8>] (mmc_blk_issue_rq+0x104/0x4d8)
  150. [   14.461918] [<c04171f8>] (mmc_blk_issue_rq) from [<c04184f8>] (mmc_queue_thread+0xb8/0x158)
  151. [   14.474918] [<c04184f8>] (mmc_queue_thread) from [<c0040538>] (kthread+0xe0/0xfc)
  152. [   14.487049] [<c0040538>] (kthread) from [<c000ec88>] (ret_from_fork+0x14/0x20)
  153. [   14.496702] ---[ end trace 5e4f249e507543e0 ]---
  154. [   14.503824] mmcblk0: unknown error -5 sending read/write command, card status 0x900
  155. [   14.516188] blk_update_request: I/O error, dev mmcblk0, sector 196408
  156. [   14.525057] EXT4-fs warning (device mmcblk0p2): __ext4_read_dirblock:1353: error -5 reading directory block (ino 244, block 1)
  157. [   14.553309] mmc0: Controller never released inhibit bit(s).
  158. [   14.562149] ------------[ cut here ]------------
  159. [   14.569104] WARNING: CPU: 1 PID: 51 at drivers/mmc/host/bcm2835-mmc.c:476 bcm2835_mmc_transfer_dma+0x1a8/0x1e0()
  160. [   14.583804] Modules linked in: uio_pdrv_genirq uio
  161. [   14.590905] CPU: 1 PID: 51 Comm: mmcqd/0 Tainted: G        W      3.18.5-v7+#225
  162. [   14.602765] [<c0016d14>] (unwind_backtrace) from [<c0012c40>] (show_stack+0x20/0x24)
  163. [   14.614861] [<c0012c40>] (show_stack) from [<c052ea44>] (dump_stack+0x98/0xd8)
  164. [   14.624340] [<c052ea44>] (dump_stack) from [<c00251e8>] (warn_slowpath_common+0x7c/0xa0)
  165. [   14.636699] [<c00251e8>] (warn_slowpath_common) from [<c00252c8>] (warn_slowpath_null+0x2c/0x34)
  166. [   14.649771] [<c00252c8>] (warn_slowpath_null) from [<c041db10>] (bcm2835_mmc_ transfer_dma+0x1a8/0x1e0)
  167. [   14.663402] [<c041db10>] (bcm2835_mmc_transfer_dma) from [<c041eb9c>] (bcm2835_mmc_request+0xa8/0xc0)
  168. [   14.676973] [<c041eb9c>] (bcm2835_mmc_request) from [<c0406d9c>] (mmc_start_request+0xd4/0xf8)
  169. [   14.689956] [<c0406d9c>] (mmc_start_request) from [<c0407b8c>] (mmc_start_req+0x2a8/0x37c)
  170. [   14.702665] [<c0407b8c>] (mmc_start_req) from [<c04166c0>] (mmc_blk_issue_rw_ rq+0xc8/0xafc)
  171. [   14.715527] [<c04166c0>] (mmc_blk_issue_rw_rq) from [<c04171f8>] (mmc_blk_issue_rq+0x104/0x4d8)
  172. [   14.728848] [<c04171f8>] (mmc_blk_issue_rq) from [<c04184f8>] (mmc_queue_thread+0xb8/0x158)
  173. [   14.741861] [<c04184f8>] (mmc_queue_thread) from [<c0040538>] (kthread+0xe0/0xfc)
  174. [   14.754003] [<c0040538>] (kthread) from [<c000ec88>] (ret_from_fork+0x14/0x20)
  175. [   14.763657] ---[ end trace 5e4f249e507543e1 ]---
  176. [   14.770817] mmcblk0: unknown error -5 sending read/write command, card status 0x900
  177. [   14.784380] blk_update_request: I/O error, dev mmcblk0, sector 61830768
  178. [   15.123169] request_module: runaway loop modprobe binfmt-0000
  179. [   15.123174] request_module: runaway loop modprobe binfmt-0000
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top