API tools faq
paste
Guest User

Untitled

a guest
Jun 29th, 2022
165
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 198.64 KB | None | 0 0
raw download clone embed print report
  1. 1
  2. 2 ### Activated 1 lzo-rle zram swap devices with 994MB each.
  3. 3 ### Activated Armbian ramlog partition with zstd compression
  4. 4
  5. 5 Wed Jun 22 11:09:41 PM UTC 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64
  6. 6
  7. 7 ### dmesg:
  8. 8
  9. 9 [ 0.744888] raid6: int64x8 xor() 580 MB/s
  10. 10 [ 0.812951] raid6: int64x4 gen() 1226 MB/s
  11. 11 [ 0.881027] raid6: int64x4 xor() 623 MB/s
  12. 12 [ 0.949103] raid6: int64x2 gen() 1046 MB/s
  13. 13 [ 1.017191] raid6: int64x2 xor() 555 MB/s
  14. 14 [ 1.085276] raid6: int64x1 gen() 780 MB/s
  15. 15 [ 1.153341] raid6: int64x1 xor() 405 MB/s
  16. 16 [ 1.153348] raid6: using algorithm neonx4 gen() 1625 MB/s
  17. 17 [ 1.153353] raid6: .... xor() 1176 MB/s, rmw enabled
  18. 18 [ 1.153359] raid6: using neon recovery algorithm
  19. 19 [ 1.154530] iommu: Default domain type: Translated
  20. 20 [ 1.154541] iommu: DMA domain TLB invalidation policy: strict mode
  21. 21 [ 1.154833] SCSI subsystem initialized
  22. 22 [ 1.155050] usbcore: registered new interface driver usbfs
  23. 23 [ 1.155091] usbcore: registered new interface driver hub
  24. 24 [ 1.155129] usbcore: registered new device driver usb
  25. 25 [ 1.155462] pps_core: LinuxPPS API ver. 1 registered
  26. 26 [ 1.155468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  27. 27 [ 1.155485] PTP clock support registered
  28. 28 [ 1.156174] Advanced Linux Sound Architecture Driver Initialized.
  29. 29 [ 1.156832] NetLabel: Initializing
  30. 30 [ 1.156838] NetLabel: domain hash size = 128
  31. 31 [ 1.156843] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  32. 32 [ 1.156913] NetLabel: unlabeled traffic allowed by default
  33. 33 [ 1.157345] clocksource: Switched to clocksource arch_sys_counter
  34. 34 [ 1.157523] VFS: Disk quotas dquot_6.6.0
  35. 35 [ 1.157582] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  36. 36 [ 1.158165] AppArmor: AppArmor Filesystem Enabled
  37. 37 [ 1.164850] NET: Registered PF_INET protocol family
  38. 38 [ 1.165055] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
  39. 39 [ 1.166318] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  40. 40 [ 1.166358] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  41. 41 [ 1.166375] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  42. 42 [ 1.166521] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
  43. 43 [ 1.166815] TCP: Hash tables configured (established 16384 bind 16384)
  44. 44 [ 1.166932] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  45. 45 [ 1.166996] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  46. 46 [ 1.167194] NET: Registered PF_UNIX/PF_LOCAL protocol family
  47. 47 [ 1.167715] Trying to unpack rootfs image as initramfs...
  48. 48 [ 1.178403] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  49. 49 [ 1.184835] Initialise system trusted keyrings
  50. 50 [ 1.184956] Key type blacklist registered
  51. 51 [ 1.185151] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  52. 52 [ 1.191042] zbud: loaded
  53. 53 [ 1.192614] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  54. 54 [ 1.194923] integrity: Platform Keyring initialized
  55. 55 [ 1.242601] xor: automatically using best checksumming function 32regs
  56. 56 [ 1.242626] async_tx: api initialized (async)
  57. 57 [ 1.242637] Key type asymmetric registered
  58. 58 [ 1.242643] Asymmetric key parser 'x509' registered
  59. 59 [ 1.242764] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  60. 60 [ 1.242920] io scheduler mq-deadline registered
  61. 61 [ 1.242928] io scheduler kyber registered
  62. 62 [ 1.243123] io scheduler bfq registered
  63. 63 [ 1.248313] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
  64. 64 [ 1.259784] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
  65. 65 [ 1.267048] cacheinfo: Unable to detect cache hierarchy for CPU 0
  66. 66 [ 1.271130] loop: module loaded
  67. 67 [ 1.273630] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  68. 68 [ 1.273663] ehci-platform: EHCI generic platform driver
  69. 69 [ 1.273821] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  70. 70 [ 1.273834] ohci-platform: OHCI generic platform driver
  71. 71 [ 1.274325] usbcore: registered new interface driver usb-storage
  72. 72 [ 1.274834] mousedev: PS/2 mouse device common for all mice
  73. 73 [ 1.275832] sun6i-rtc 7000000.rtc: registered as rtc0
  74. 74 [ 1.275868] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:05 UTC (5)
  75. 75 [ 1.275974] sun6i-rtc 7000000.rtc: RTC enabled
  76. 76 [ 1.276112] i2c_dev: i2c /dev entries driver
  77. 77 [ 1.276926] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  78. 78 [ 1.278528] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pm not found, using dummy regulator
  79. 79 [ 1.278948] sdhci: Secure Digital Host Controller Interface driver
  80. 80 [ 1.278957] sdhci: Copyright(c) Pierre Ossman
  81. 81 [ 1.278981] Synopsys Designware Multimedia Card Interface Driver
  82. 82 [ 1.279780] sdhci-pltfm: SDHCI platform and OF driver helper
  83. 83 [ 1.279946] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator
  84. 84 [ 1.281026] ledtrig-cpu: registered to indicate activity on CPUs
  85. 85 [ 1.281621] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
  86. 86 [ 1.281901] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  87. 87 [ 1.282026] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  88. 88 [ 1.282128] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  89. 89 [ 1.282225] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  90. 90 [ 1.282307] sun8i-ce 1904000.crypto: Register cbc(aes)
  91. 91 [ 1.282484] sun8i-ce 1904000.crypto: Register ecb(aes)
  92. 92 [ 1.282601] sun8i-ce 1904000.crypto: Register cbc(des3_ede)
  93. 93 [ 1.282714] sun8i-ce 1904000.crypto: Register ecb(des3_ede)
  94. 94 [ 1.282813] sun8i-ce 1904000.crypto: Register md5
  95. 95 [ 1.282923] sun8i-ce 1904000.crypto: Register sha1
  96. 96 [ 1.283031] sun8i-ce 1904000.crypto: Register sha224
  97. 97 [ 1.283141] sun8i-ce 1904000.crypto: Register sha256
  98. 98 [ 1.283249] sun8i-ce 1904000.crypto: Register sha384
  99. 99 [ 1.283355] sun8i-ce 1904000.crypto: Register sha512
  100. 100 [ 1.283461] sun8i-ce 1904000.crypto: Register stdrng
  101. 101 [ 1.284161] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0
  102. 102 [ 1.284780] hid: raw HID events driver (C) Jiri Kosina
  103. 103 [ 1.284906] usbcore: registered new interface driver usbhid
  104. 104 [ 1.284913] usbhid: USB HID core driver
  105. 105 [ 1.285589] random: crng init done
  106. 106 [ 1.287983] NET: Registered PF_INET6 protocol family
  107. 107 [ 1.870959] Freeing initrd memory: 12684K
  108. 108 [ 1.899925] Segment Routing with IPv6
  109. 109 [ 1.899991] In-situ OAM (IOAM) with IPv6
  110. 110 [ 1.900077] NET: Registered PF_PACKET protocol family
  111. 111 [ 1.900184] 8021q: 802.1Q VLAN Support v1.8
  112. 112 [ 1.900333] 9pnet: Installing 9P2000 support
  113. 113 [ 1.900410] Key type dns_resolver registered
  114. 114 [ 1.900858] registered taskstats version 1
  115. 115 [ 1.900878] Loading compiled-in X.509 certificates
  116. 116 [ 1.904709] Loaded X.509 cert 'Build time autogenerated kernel key: 32330adefd2da02e444296fafd37464380789679'
  117. 117 [ 1.907647] zswap: loaded using pool zstd/z3fold
  118. 118 [ 1.908276] Key type ._fscrypt registered
  119. 119 [ 1.908284] Key type .fscrypt registered
  120. 120 [ 1.908289] Key type fscrypt-provisioning registered
  121. 121 [ 1.909306] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no
  122. 122 [ 1.923182] Key type encrypted registered
  123. 123 [ 1.923213] AppArmor: AppArmor sha1 policy hashing enabled
  124. 124 [ 1.923251] ima: No TPM chip found, activating TPM-bypass!
  125. 125 [ 1.923278] ima: Allocated hash algorithm: sha1
  126. 126 [ 1.923311] ima: No architecture policies found
  127. 127 [ 1.923359] evm: Initialising EVM extended attributes:
  128. 128 [ 1.923364] evm: security.selinux
  129. 129 [ 1.923369] evm: security.SMACK64
  130. 130 [ 1.923373] evm: security.SMACK64EXEC
  131. 131 [ 1.923378] evm: security.SMACK64TRANSMUTE
  132. 132 [ 1.923382] evm: security.SMACK64MMAP
  133. 133 [ 1.923386] evm: security.apparmor
  134. 134 [ 1.923390] evm: security.ima
  135. 135 [ 1.923394] evm: security.capability
  136. 136 [ 1.923398] evm: HMAC attrs: 0x1
  137. 137 [ 1.936408] platform 1100000.mixer: Fixing up cyclic dependency with 6510000.tcon-top
  138. 138 [ 1.936763] sun8i-mixer 1100000.mixer: Adding to iommu group 0
  139. 139 [ 1.938822] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  140. 140 [ 1.938855] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
  141. 141 [ 1.939005] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010
  142. 142 [ 1.939070] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x05200000
  143. 143 [ 1.939547] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
  144. 144 [ 1.939563] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  145. 145 [ 1.939574] usb usb1: Product: xHCI Host Controller
  146. 146 [ 1.939582] usb usb1: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd
  147. 147 [ 1.939591] usb usb1: SerialNumber: xhci-hcd.1.auto
  148. 148 [ 1.940134] hub 1-0:1.0: USB hub found
  149. 149 [ 1.940180] hub 1-0:1.0: 1 port detected
  150. 150 [ 1.940516] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  151. 151 [ 1.940535] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
  152. 152 [ 1.940555] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  153. 153 [ 1.940645] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  154. 154 [ 1.940802] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
  155. 155 [ 1.940815] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  156. 156 [ 1.940824] usb usb2: Product: xHCI Host Controller
  157. 157 [ 1.940833] usb usb2: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd
  158. 158 [ 1.940841] usb usb2: SerialNumber: xhci-hcd.1.auto
  159. 159 [ 1.941241] hub 2-0:1.0: USB hub found
  160. 160 [ 1.941277] hub 2-0:1.0: 1 port detected
  161. 161 [ 1.943908] sun50i_cpufreq_nvmem: Using CPU speed bin speed0
  162. 162 [ 1.945772] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version
  163. 163 [ 1.952109] of_cfs_init
  164. 164 [ 1.952249] of_cfs_init: OK
  165. 165 [ 1.952583] ALSA device list:
  166. 166 [ 1.952589] No soundcards found.
  167. 167 [ 1.953730] Freeing unused kernel memory: 2496K
  168. 168 [ 1.985428] Run /init as init process
  169. 169 [ 1.985435] with arguments:
  170. 170 [ 1.985442] /init
  171. 171 [ 1.985447] with environment:
  172. 172 [ 1.985452] HOME=/
  173. 173 [ 1.985457] TERM=linux
  174. 174 [ 1.985462] ubootpart=deddb4e0-01
  175. 175 [ 1.985467] cgroup_enable=memory
  176. 176 [ 2.453863] axp20x-i2c 0-0036: AXP20x variant AXP806 found
  177. 177 [ 2.462453] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input0
  178. 178 [ 2.466670] vdd-cpu: supplied by vcc-5v
  179. 179 [ 2.468475] vdd-gpu: supplied by vcc-5v
  180. 180 [ 2.469238] vdd-sys: Bringing 900000uV into 960000-960000uV
  181. 181 [ 2.469672] vdd-sys: supplied by vcc-5v
  182. 182 [ 2.471160] vcc-dram: supplied by vcc-5v
  183. 183 [ 2.472080] vcc-pl-led-ir: supplied by vcc-5v
  184. 184 [ 2.473033] vcc33-audio-tv-ephy-mac: Bringing 700000uV into 3300000-3300000uV
  185. 185 [ 2.474707] vcc33-audio-tv-ephy-mac: supplied by vcc-5v
  186. 186 [ 2.582109] vcc33-io-pd-emmc-sd-usb-uart-1: Bringing 700000uV into 3300000-3300000uV
  187. 187 [ 2.582470] vcc33-io-pd-emmc-sd-usb-uart-1: supplied by vcc-5v
  188. 188 [ 2.583460] vcc18-dram-bias-pll: supplied by vcc-5v
  189. 189 [ 2.584528] vcc-efuse-pcie-hdmi-pc: supplied by vcc-5v
  190. 190 [ 2.585177] vcc-wifi-io-pm-pg: Bringing 700000uV into 1800000-1800000uV
  191. 191 [ 2.585513] vcc-wifi-io-pm-pg: supplied by vcc-5v
  192. 192 [ 2.586596] bldo4: supplied by vcc-5v
  193. 193 [ 2.587115] vcc33-io-pd-emmc-sd-usb-uart-2: supplied by vcc-5v
  194. 194 [ 2.587899] cldo2: supplied by vcc-5v
  195. 195 [ 2.588536] cldo3: supplied by vcc-5v
  196. 196 [ 2.588784] sw: supplied by regulator-dummy
  197. 197 [ 2.589376] axp20x-i2c 0-0036: AXP20X driver loaded
  198. 198 [ 2.595683] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
  199. 199 [ 2.596198] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pb not found, using dummy regulator
  200. 200 [ 2.597128] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator
  201. 201 [ 2.597874] printk: console [ttyS0] disabled
  202. 202 [ 2.597986] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 35, base_baud = 1500000) is a 16550A
  203. 203 [ 2.598221] printk: console [ttyS0] enabled
  204. 204 [ 2.600369] sun4i-drm display-engine: Adding to iommu group 0
  205. 205 [ 2.619925] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e16990)
  206. 206 [ 2.620239] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e1abb8)
  207. 207 [ 2.620573] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e11ba0)
  208. 208 [ 2.620663] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator
  209. 209 [ 2.621137] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
  210. 210 [ 2.621688] sun8i-dw-hdmi 6000000.hdmi: EVENT=plugin
  211. 211 [ 2.621855] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
  212. 212 [ 2.622321] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e15cc8)
  213. 213 [ 2.623776] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
  214. 214 [ 2.623835] sun8i-dw-hdmi 6000000.hdmi: read_hpd result: 1
  215. 215 [ 2.778987] Console: switching to colour frame buffer device 240x67
  216. 216 [ 2.828833] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device
  217. 217 [ 2.849205] acx00-codec acx00-codec: DMA mask not set
  218. 218 [ 2.852053] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  219. 219 [ 2.855810] vcc-wifi-io: supplied by vcc33-wifi
  220. 220 [ 2.856444] sunxi-mmc 4020000.mmc: Got CD GPIO
  221. 221 [ 2.858196] ehci-platform 5101000.usb: EHCI Host Controller
  222. 222 [ 2.858242] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 3
  223. 223 [ 2.858394] ehci-platform 5101000.usb: irq 41, io mem 0x05101000
  224. 224 [ 2.877359] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
  225. 225 [ 2.877713] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
  226. 226 [ 2.877728] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  227. 227 [ 2.877739] usb usb3: Product: EHCI Host Controller
  228. 228 [ 2.877747] usb usb3: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd
  229. 229 [ 2.877755] usb usb3: SerialNumber: 5101000.usb
  230. 230 [ 2.878323] hub 3-0:1.0: USB hub found
  231. 231 [ 2.878366] hub 3-0:1.0: 1 port detected
  232. 232 [ 2.879507] ehci-platform 5311000.usb: EHCI Host Controller
  233. 233 [ 2.879546] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 4
  234. 234 [ 2.879692] ehci-platform 5311000.usb: irq 44, io mem 0x05311000
  235. 235 [ 2.880784] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
  236. 236 [ 2.881697] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  237. 237 [ 2.897367] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00
  238. 238 [ 2.897698] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
  239. 239 [ 2.897713] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  240. 240 [ 2.897724] usb usb4: Product: EHCI Host Controller
  241. 241 [ 2.897732] usb usb4: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd
  242. 242 [ 2.897741] usb usb4: SerialNumber: 5311000.usb
  243. 243 [ 2.898322] hub 4-0:1.0: USB hub found
  244. 244 [ 2.898371] hub 4-0:1.0: 1 port detected
  245. 245 [ 2.899476] ohci-platform 5101400.usb: Generic Platform OHCI controller
  246. 246 [ 2.899516] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 5
  247. 247 [ 2.899655] ohci-platform 5101400.usb: irq 42, io mem 0x05101400
  248. 248 [ 2.932563] mmc0: host does not support reading read-only switch, assuming write-enable
  249. 249 [ 2.936506] mmc0: new high speed SD card at address e624
  250. 250 [ 2.937419] mmcblk0: mmc0:e624 SU02G 1.84 GiB
  251. 251 [ 2.939836] mmcblk0: p1
  252. 252 [ 2.965609] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
  253. 253 [ 2.965637] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  254. 254 [ 2.965648] usb usb5: Product: Generic Platform OHCI controller
  255. 255 [ 2.965657] usb usb5: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd
  256. 256 [ 2.965665] usb usb5: SerialNumber: 5101400.usb
  257. 257 [ 2.966299] hub 5-0:1.0: USB hub found
  258. 258 [ 2.966359] hub 5-0:1.0: 1 port detected
  259. 259 [ 2.967589] ohci-platform 5311400.usb: Generic Platform OHCI controller
  260. 260 [ 2.967628] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6
  261. 261 [ 2.967769] ohci-platform 5311400.usb: irq 45, io mem 0x05311400
  262. 262 [ 3.017517] mmc2: new HS200 MMC card at address 0001
  263. 263 [ 3.018514] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB
  264. 264 [ 3.021667] Alternate GPT is invalid, using primary GPT.
  265. 265 [ 3.021753] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16
  266. 266 [ 3.024400] mmcblk2boot0: mmc2:0001 8GTF4R 4.00 MiB
  267. 267 [ 3.026418] mmcblk2boot1: mmc2:0001 8GTF4R 4.00 MiB
  268. 268 [ 3.029775] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
  269. 269 [ 3.029808] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  270. 270 [ 3.029819] usb usb6: Product: Generic Platform OHCI controller
  271. 271 [ 3.029827] usb usb6: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd
  272. 272 [ 3.029836] usb usb6: SerialNumber: 5311400.usb
  273. 273 [ 3.030549] hub 6-0:1.0: USB hub found
  274. 274 [ 3.030622] hub 6-0:1.0: 1 port detected
  275. 275 [ 3.031987] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator
  276. 276 [ 3.032284] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests
  277. 277 [ 3.125883] musb-hdrc musb-hdrc.5.auto: MUSB HDRC host driver
  278. 278 [ 3.125975] musb-hdrc musb-hdrc.5.auto: new USB bus registered, assigned bus number 7
  279. 279 [ 3.126415] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
  280. 280 [ 3.126442] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  281. 281 [ 3.126453] usb usb7: Product: MUSB HDRC host driver
  282. 282 [ 3.126462] usb usb7: Manufacturer: Linux 5.15.48-sunxi64 musb-hcd
  283. 283 [ 3.126471] usb usb7: SerialNumber: musb-hdrc.5.auto
  284. 284 [ 3.127297] hub 7-0:1.0: USB hub found
  285. 285 [ 3.127417] hub 7-0:1.0: 1 port detected
  286. 286 [ 3.143207] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found
  287. 287 [ 3.143235] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found
  288. 288 [ 3.143598] dwmac-sun8i 5020000.ethernet: supply phy-io not found, using dummy regulator
  289. 289 [ 3.143818] dwmac-sun8i 5020000.ethernet: PTP uses main clock
  290. 290 [ 3.143862] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000)
  291. 291 [ 3.249669] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported
  292. 292 [ 3.249698] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported
  293. 293 [ 3.249705] dwmac-sun8i 5020000.ethernet: COE Type 2
  294. 294 [ 3.249715] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported
  295. 295 [ 3.249723] dwmac-sun8i 5020000.ethernet: Normal descriptors
  296. 296 [ 3.249730] dwmac-sun8i 5020000.ethernet: Chain mode enabled
  297. 297 [ 3.424037] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none.
  298. 298 [ 4.362426] systemd[1]: System time before build time, advancing clock.
  299. 299 [ 4.422946] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq
  300. 300 [ 4.429106] systemd[1]: systemd 249.11-0ubuntu3.1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
  301. 301 [ 4.429823] systemd[1]: Detected architecture arm64.
  302. 302 [ 4.434514] systemd[1]: Hostname set to <orangepi3-lts>.
  303. 303 [ 4.653390] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  304. 304 [ 4.670825] mmc1: new high speed SDIO card at address 8800
  305. 305 [ 5.539508] systemd[1]: Queued start job for default target Graphical Interface.
  306. 306 [ 5.545307] systemd[1]: Created slice Slice /system/modprobe.
  307. 307 [ 5.548119] systemd[1]: Created slice Slice /system/serial-getty.
  308. 308 [ 5.550026] systemd[1]: Created slice User and Session Slice.
  309. 309 [ 5.550930] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active.
  310. 310 [ 5.551676] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  311. 311 [ 5.552958] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  312. 312 [ 5.553721] systemd[1]: Reached target Local Encrypted Volumes.
  313. 313 [ 5.554466] systemd[1]: Reached target Slice Units.
  314. 314 [ 5.554816] systemd[1]: Reached target Swaps.
  315. 315 [ 5.555130] systemd[1]: Reached target System Time Set.
  316. 316 [ 5.555646] systemd[1]: Reached target Local Verity Protected Volumes.
  317. 317 [ 5.574530] systemd[1]: Listening on RPCbind Server Activation Socket.
  318. 318 [ 5.575879] systemd[1]: Listening on Syslog Socket.
  319. 319 [ 5.576770] systemd[1]: Listening on fsck to fsckd communication Socket.
  320. 320 [ 5.577598] systemd[1]: Listening on initctl Compatibility Named Pipe.
  321. 321 [ 5.579088] systemd[1]: Listening on Journal Audit Socket.
  322. 322 [ 5.579985] systemd[1]: Listening on Journal Socket (/dev/log).
  323. 323 [ 5.580970] systemd[1]: Listening on Journal Socket.
  324. 324 [ 5.582235] systemd[1]: Listening on udev Control Socket.
  325. 325 [ 5.583163] systemd[1]: Listening on udev Kernel Socket.
  326. 326 [ 5.583545] systemd[1]: Reached target Socket Units.
  327. 327 [ 5.588020] systemd[1]: Mounting Huge Pages File System...
  328. 328 [ 5.593113] systemd[1]: Mounting POSIX Message Queue File System...
  329. 329 [ 5.598169] systemd[1]: Mounting NFSD configuration filesystem...
  330. 330 [ 5.604108] systemd[1]: Mounting Kernel Debug File System...
  331. 331 [ 5.605397] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  332. 332 [ 5.606343] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
  333. 333 [ 5.614127] systemd[1]: Starting Restore / save the current clock...
  334. 334 [ 5.621596] systemd[1]: Starting Set the console keyboard layout...
  335. 335 [ 5.627545] systemd[1]: Starting Create List of Static Device Nodes...
  336. 336 [ 5.634854] systemd[1]: Starting Load Kernel Module configfs...
  337. 337 [ 5.641326] systemd[1]: Starting Load Kernel Module drm...
  338. 338 [ 5.649913] systemd[1]: Starting Load Kernel Module fuse...
  339. 339 [ 5.655970] systemd[1]: Started Nameserver information manager.
  340. 340 [ 5.657485] systemd[1]: Reached target Preparation for Network.
  341. 341 [ 5.658895] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
  342. 342 [ 5.678056] systemd[1]: Starting Load Kernel Modules...
  343. 343 [ 5.684047] systemd[1]: Starting Remount Root and Kernel File Systems...
  344. 344 [ 5.689804] systemd[1]: Starting Coldplug All udev Devices...
  345. 345 [ 5.699866] systemd[1]: Mounted Huge Pages File System.
  346. 346 [ 5.700928] systemd[1]: Mounted POSIX Message Queue File System.
  347. 347 [ 5.701876] systemd[1]: Mounted Kernel Debug File System.
  348. 348 [ 5.704269] systemd[1]: Finished Restore / save the current clock.
  349. 349 [ 5.707238] systemd[1]: Finished Create List of Static Device Nodes.
  350. 350 [ 5.709599] systemd[1]: [email protected]: Deactivated successfully.
  351. 351 [ 5.710972] systemd[1]: Finished Load Kernel Module configfs.
  352. 352 [ 5.713672] systemd[1]: [email protected]: Deactivated successfully.
  353. 353 [ 5.715042] systemd[1]: Finished Load Kernel Module drm.
  354. 354 [ 5.721105] systemd[1]: Mounting Kernel Configuration File System...
  355. 355 [ 5.730317] RPC: Registered named UNIX socket transport module.
  356. 356 [ 5.730342] RPC: Registered udp transport module.
  357. 357 [ 5.730347] RPC: Registered tcp transport module.
  358. 358 [ 5.730351] RPC: Registered tcp NFSv4.1 backchannel transport module.
  359. 359 [ 5.734434] fuse: init (API version 7.34)
  360. 360 [ 5.735820] systemd[1]: Mounted Kernel Configuration File System.
  361. 361 [ 5.739149] systemd[1]: [email protected]: Deactivated successfully.
  362. 362 [ 5.740643] systemd[1]: Finished Load Kernel Module fuse.
  363. 363 [ 5.747747] systemd[1]: Mounting FUSE Control File System...
  364. 364 [ 5.759743] systemd[1]: Mounted FUSE Control File System.
  365. 365 [ 5.769466] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none.
  366. 366 [ 5.775560] systemd[1]: Finished Remount Root and Kernel File Systems.
  367. 367 [ 5.776589] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  368. 368 [ 5.781262] systemd[1]: Starting Load/Save Random Seed...
  369. 369 [ 5.793700] systemd[1]: Starting Create System Users...
  370. 370 [ 5.934353] WCN: marlin_init entry!
  371. 371 [ 5.934896] WCN: wcn config bt wake host
  372. 372 [ 5.935147] WCN_ERR: dts node for bt_wake not found
  373. 373 [ 5.935152] WCN: marlin2 parse_dt some para not config
  374. 374 [ 5.935164] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840
  375. 375 [ 5.940206] sdiohal:sdiohal_init ok
  376. 376 [ 5.940965] WCN: marlin_probe ok!
  377. 377 [ 5.973568] Installing knfsd (copyright (C) 1996 [email protected]).
  378. 378 [ 5.980883] systemd[1]: Mounted NFSD configuration filesystem.
  379. 379 [ 5.995139] mtty_probe init device addr: 0x00000000e008fcc3
  380. 380 [ 5.995353] -->rfkill_bluetooth_init
  381. 381 [ 5.995505] bluetooth_set_power: start_block=1
  382. 382 [ 5.995517] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0
  383. 383 [ 5.995527] bluetooth_set_power: end_block=1
  384. 384 [ 5.995543] <--rfkill_bluetooth_init
  385. 385 [ 5.997196] systemd[1]: Finished Load/Save Random Seed.
  386. 386 [ 6.007032] systemd[1]: Finished Create System Users.
  387. 387 [ 6.014829] systemd[1]: Condition check resulted in First Boot Complete being skipped.
  388. 388 [ 6.019566] systemd[1]: Starting Create Static Device Nodes in /dev...
  389. 389 [ 6.044920] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  390. 390 [ 6.054807] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  391. 391 [ 6.065700] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9
  392. 392 [ 6.065819] [ADDR_MGT] addr_mgt_probe: success.
  393. 393 [ 6.099306] systemd[1]: Finished Set the console keyboard layout.
  394. 394 [ 6.114362] WCN: start_marlin [MARLIN_WIFI]
  395. 395 [ 6.114390] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1
  396. 396 [ 6.114398] WCN: the first power on start
  397. 397 [ 6.128170] systemd[1]: Finished Create Static Device Nodes in /dev.
  398. 398 [ 6.135571] systemd[1]: Reached target Preparation for Local File Systems.
  399. 399 [ 6.148152] systemd[1]: Mounting /tmp...
  400. 400 [ 6.163007] systemd[1]: Starting Rule-based Manager for Device Events and Files...
  401. 401 [ 6.173607] systemd[1]: Mounted /tmp.
  402. 402 [ 6.180963] systemd[1]: Reached target Local File Systems.
  403. 403 [ 6.193549] systemd[1]: Starting Armbian leds state...
  404. 404 [ 6.206058] systemd[1]: Starting Armbian ZRAM config...
  405. 405 [ 6.218849] systemd[1]: Starting Set console font and keymap...
  406. 406 [ 6.221439] WCN: marlin chip en dummy pull up -- need manually set GPIO
  407. 407 [ 6.226492] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped.
  408. 408 [ 6.231775] systemd[1]: Starting Mark the need to relabel after reboot...
  409. 409 [ 6.254567] sdiohal:sdiohal_scan_card
  410. 410 [ 6.254813] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=50000000
  411. 411 [ 6.254916] WCN: marlin_scan_finish!
  412. 412 [ 6.254921] sdiohal:probe ok
  413. 413 [ 6.255084] sdiohal:scan end!
  414. 414 [ 6.255091] WCN: then marlin start to download
  415. 415 [ 6.255318] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001
  416. 416 [ 6.255332] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start!
  417. 417 [ 6.256464] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  418. 418 [ 6.256695] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  419. 419 [ 6.256914] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  420. 420 [ 6.259818] systemd[1]: Finished Set console font and keymap.
  421. 421 [ 6.269267] systemd[1]: Finished Mark the need to relabel after reboot.
  422. 422 [ 6.341145] systemd[1]: Finished Coldplug All udev Devices.
  423. 423 [ 6.358804] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
  424. 424 [ 6.391581] systemd[1]: Finished Armbian leds state.
  425. 425 [ 6.401751] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
  426. 426 [ 6.550342] systemd[1]: Started Rule-based Manager for Device Events and Files.
  427. 427 [ 6.606026] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  428. 428 [ 6.624533] systemd[1]: Starting Load/Save RF Kill Switch Status...
  429. 429 [ 6.737741] systemd[1]: Started Load/Save RF Kill Switch Status.
  430. 430 [ 6.804920] zram: Added device: zram0
  431. 431 [ 6.805508] zram: Added device: zram1
  432. 432 [ 6.806068] zram: Added device: zram2
  433. 433 [ 6.930631] mc: Linux media interface: v0.10
  434. 434 [ 6.936826] panfrost 1800000.gpu: clock rate = 432000000
  435. 435 [ 6.936868] panfrost 1800000.gpu: bus_clock rate = 100000000
  436. 436 [ 6.937558] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0
  437. 437 [ 6.937587] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400
  438. 438 [ 6.937594] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7
  439. 439 [ 6.937603] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1
  440. 440 [ 6.950818] [drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 1
  441. 441 [ 6.965180] videodev: Linux video capture interface: v2.00
  442. 442 [ 7.007202] zram0: detected capacity change from 0 to 2037304
  443. 443 [ 7.036615] systemd[1]: Found device /dev/ttyS0.
  444. 444 [ 7.078310] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned.
  445. 445 [ 7.079704] cedrus 1c0e000.video-codec: Adding to iommu group 0
  446. 446 [ 7.087964] cedrus 1c0e000.video-codec: Device registered as /dev/video0
  447. 447 [ 7.111037] Adding 1018648k swap on /dev/zram0. Priority:5 extents:1 across:1018648k SSFS
  448. 448 [ 7.209859] WCN: combin_img 0 marlin_firmware_write finish and successful
  449. 449 [ 7.211491] WCN: marlin_start_run read reset reg val:0x1
  450. 450 [ 7.211516] WCN: after do marlin_start_run reset reg val:0x0
  451. 451 [ 7.211699] WCN: s_marlin_bootup_time=7211699513
  452. 452 [ 7.224058] WCN: clock mode: TSX
  453. 453 [ 7.224278] WCN: marlin_write_cali_data sync init_state:0x1f
  454. 454 [ 7.249629] WCN: marlin_write_cali_data sync init_state:0x1f
  455. 455 [ 7.278907] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1
  456. 456 [ 7.278931] WCN: sdio_config bt_wake_host trigger:[high]
  457. 457 [ 7.278935] WCN: sdio_config irq:[inband]
  458. 458 [ 7.278937] WCN: sdio_config wake_host_level_duration_time:[20ms]
  459. 459 [ 7.278941] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse]
  460. 460 [ 7.278943] WCN: marlin_send_sdio_config_to_cp sdio_config:0x80f01 (enable config)
  461. 461 [ 7.279450] WCN: marlin_write_cali_data finish
  462. 462 [ 7.279859] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  463. 463 [ 7.309902] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  464. 464 [ 7.328070] zram1: detected capacity change from 0 to 102400
  465. 465 [ 7.338012] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  466. 466 [ 7.347089] Registered IR keymap rc-empty
  467. 467 [ 7.350505] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0
  468. 468 [ 7.356860] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
  469. 469 [ 7.360227] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input1
  470. 470 [ 7.360643] sunxi-ir 7040000.ir: initialized sunXi IR driver
  471. 471 [ 7.365916] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  472. 472 [ 7.393911] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0
  473. 473 [ 7.393936] WCN: marlin_bind_verify confuse data: 0xd9d0850b1675e92a3f4f9935562606a9
  474. 474 [ 7.393951] WCN: marlin_bind_verify verify data: 0x13e0d33c1eec6b643e2808af44586495
  475. 475 [ 7.394553] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0
  476. 476 [ 7.421685] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0
  477. 477 [ 7.421718] sdiohal:sdiohal_runtime_get entry
  478. 478 [ 7.433818] WCN: get_cp2_version entry!
  479. 479 [ 7.473263] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~
  480. 480 [ 7.473321] WCN: switch_cp2_log - close entry!
  481. 481 [ 7.474787] WCN: WCND at cmd read:OK
  482. 482 [ 7.474865] WCN: then marlin download finished and run ok
  483. 483 [ 7.474872] WCN: start_loopcheck
  484. 484 [ 7.478673] systemd[1]: Finished Armbian ZRAM config.
  485. 485 [ 7.494170] systemd[1]: Starting Armbian memory supported logging...
  486. 486 [ 7.514562] WCN: get_board_ant_num [one_ant]
  487. 487 [ 7.514589] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini
  488. 488 [ 7.588549] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none.
  489. 489 [ 7.614190] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  490. 490 [ 7.614521] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings.
  491. 491 [ 7.669965] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  492. 492 [ 7.670877] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  493. 493 [ 7.671200] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  494. 494 [ 7.671517] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  495. 495 [ 7.671742] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  496. 496 [ 7.675042] systemd[1]: Finished Load Kernel Modules.
  497. 497 [ 7.687300] systemd[1]: Starting Apply Kernel Variables...
  498. 498 [ 7.749460] systemd[1]: Finished Apply Kernel Variables.
  499. 499 [ 7.763777] systemd[1]: Starting Raise network interfaces...
  500. 500 [ 8.241462] systemd[1]: Finished Raise network interfaces.
  501. 501 [ 8.632610] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  502. 502 [ 8.632929] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  503. 503 [ 8.632992] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  504. 504 [ 8.633089] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  505. 505 [ 8.633160] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  506. 506 [ 9.451037] systemd[1]: Finished Armbian memory supported logging.
  507. 507 [ 9.460903] systemd[1]: Starting Journal Service...
  508. 508 [ 9.592925] systemd[1]: Started Journal Service.
  509. 509 [ 9.620121] systemd-journald[667]: Received client request to flush runtime journal.
  510. 510
  511. 511 ### armbian-release:
  512. 512
  513. 513 # PLEASE DO NOT EDIT THIS FILE
  514. 514 BOARD=orangepi3-lts
  515. 515 BOARD_NAME="Orange Pi 3 LTS"
  516. 516 BOARDFAMILY=sun50iw6
  517. 517 BUILD_REPOSITORY_URL=https://github.com/armbian/build
  518. 518 BUILD_REPOSITORY_COMMIT=13f5fba13c
  519. 519 VERSION=22.05.3
  520. 520 LINUXFAMILY=sunxi64
  521. 521 ARCH=arm64
  522. 522 IMAGE_TYPE=stable
  523. 523 BOARD_TYPE=conf
  524. 524 INITRD_ARCH=arm64
  525. 525 KERNEL_IMAGE_TYPE=stable
  526. 526
  527. 527 ### boot environment:
  528. 528
  529. 529 verbosity=1
  530. 530 bootlogo=false
  531. 531 console=both
  532. 532 disp_mode=1920x1080p60
  533. 533 overlay_prefix=sun50i-h6
  534. 534 rootdev=UUID=81cc9469-982a-4232-8db4-540eebdd7c04
  535. 535 rootfstype=ext4
  536. 536
  537. 537 ### lsusb:
  538. 538
  539. 539 Wed Jun 22 11:09:41 PM UTC 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64
  540. 540 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  541. 541 Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  542. 542 Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  543. 543 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  544. 544 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  545. 545 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  546. 546 Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  547. 547
  548. 548 ### lscpu:
  549. 549
  550. 550 Architecture: aarch64
  551. 551 CPU op-mode(s): 32-bit, 64-bit
  552. 552 Byte Order: Little Endian
  553. 553 CPU(s): 4
  554. 554 On-line CPU(s) list: 0-3
  555. 555 Vendor ID: ARM
  556. 556 Model name: Cortex-A53
  557. 557 Model: 4
  558. 558 Thread(s) per core: 1
  559. 559 Core(s) per cluster: 4
  560. 560 Socket(s): -
  561. 561 Cluster(s): 1
  562. 562 Stepping: r0p4
  563. 563 CPU max MHz: 1800.0000
  564. 564 CPU min MHz: 480.0000
  565. 565 BogoMIPS: 48.00
  566. 566 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  567. 567 NUMA node(s): 1
  568. 568 NUMA node0 CPU(s): 0-3
  569. 569 Vulnerability Itlb multihit: Not affected
  570. 570 Vulnerability L1tf: Not affected
  571. 571 Vulnerability Mds: Not affected
  572. 572 Vulnerability Meltdown: Not affected
  573. 573 Vulnerability Mmio stale data: Not affected
  574. 574 Vulnerability Spec store bypass: Not affected
  575. 575 Vulnerability Spectre v1: Mitigation; __user pointer sanitization
  576. 576 Vulnerability Spectre v2: Not affected
  577. 577 Vulnerability Srbds: Not affected
  578. 578 Vulnerability Tsx async abort: Not affected
  579. 579
  580. 580 ### cpuinfo:
  581. 581
  582. 582 processor : 0
  583. 583 BogoMIPS : 48.00
  584. 584 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  585. 585 CPU implementer : 0x41
  586. 586 CPU architecture: 8
  587. 587 CPU variant : 0x0
  588. 588 CPU part : 0xd03
  589. 589 CPU revision : 4
  590. 590
  591. 591 processor : 1
  592. 592 BogoMIPS : 48.00
  593. 593 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  594. 594 CPU implementer : 0x41
  595. 595 CPU architecture: 8
  596. 596 CPU variant : 0x0
  597. 597 CPU part : 0xd03
  598. 598 CPU revision : 4
  599. 599
  600. 600 processor : 2
  601. 601 BogoMIPS : 48.00
  602. 602 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  603. 603 CPU implementer : 0x41
  604. 604 CPU architecture: 8
  605. 605 CPU variant : 0x0
  606. 606 CPU part : 0xd03
  607. 607 CPU revision : 4
  608. 608
  609. 609 processor : 3
  610. 610 BogoMIPS : 48.00
  611. 611 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  612. 612 CPU implementer : 0x41
  613. 613 CPU architecture: 8
  614. 614 CPU variant : 0x0
  615. 615 CPU part : 0xd03
  616. 616 CPU revision : 4
  617. 617
  618. 618
  619. 619 ### meminfo:
  620. 620
  621. 621 MemTotal: 2037300 kB
  622. 622 MemFree: 1854132 kB
  623. 623 MemAvailable: 1853556 kB
  624. 624 Buffers: 10176 kB
  625. 625 Cached: 49620 kB
  626. 626 SwapCached: 0 kB
  627. 627 Active: 26016 kB
  628. 628 Inactive: 54876 kB
  629. 629 Active(anon): 396 kB
  630. 630 Inactive(anon): 24052 kB
  631. 631 Active(file): 25620 kB
  632. 632 Inactive(file): 30824 kB
  633. 633 Unevictable: 0 kB
  634. 634 Mlocked: 0 kB
  635. 635 SwapTotal: 1018648 kB
  636. 636 SwapFree: 1018648 kB
  637. 637 Dirty: 824 kB
  638. 638 Writeback: 4 kB
  639. 639 AnonPages: 21004 kB
  640. 640 Mapped: 17644 kB
  641. 641 Shmem: 3328 kB
  642. 642 KReclaimable: 9860 kB
  643. 643 Slab: 45636 kB
  644. 644 SReclaimable: 9860 kB
  645. 645 SUnreclaim: 35776 kB
  646. 646 KernelStack: 2608 kB
  647. 647 PageTables: 1764 kB
  648. 648 NFS_Unstable: 0 kB
  649. 649 Bounce: 0 kB
  650. 650 WritebackTmp: 0 kB
  651. 651 CommitLimit: 2037296 kB
  652. 652 Committed_AS: 43660 kB
  653. 653 VmallocTotal: 133143592960 kB
  654. 654 VmallocUsed: 23560 kB
  655. 655 VmallocChunk: 0 kB
  656. 656 Percpu: 1024 kB
  657. 657 AnonHugePages: 0 kB
  658. 658 ShmemHugePages: 0 kB
  659. 659 ShmemPmdMapped: 0 kB
  660. 660 FileHugePages: 0 kB
  661. 661 FilePmdMapped: 0 kB
  662. 662 CmaTotal: 131072 kB
  663. 663 CmaFree: 128768 kB
  664. 664 HugePages_Total: 0
  665. 665 HugePages_Free: 0
  666. 666 HugePages_Rsvd: 0
  667. 667 HugePages_Surp: 0
  668. 668 Hugepagesize: 2048 kB
  669. 669 Hugetlb: 0 kB
  670. 670
  671. 671 ### virtual memory:
  672. 672
  673. 673 vm.admin_reserve_kbytes = 8192
  674. 674 vm.compaction_proactiveness = 20
  675. 675 vm.compact_unevictable_allowed = 1
  676. 676 vm.dirty_background_bytes = 0
  677. 677 vm.dirty_background_ratio = 10
  678. 678 vm.dirty_bytes = 0
  679. 679 vm.dirty_expire_centisecs = 3000
  680. 680 vm.dirty_ratio = 20
  681. 681 vm.dirtytime_expire_seconds = 43200
  682. 682 vm.dirty_writeback_centisecs = 500
  683. 683 vm.extfrag_threshold = 500
  684. 684 vm.hugetlb_shm_group = 0
  685. 685 vm.laptop_mode = 0
  686. 686 vm.legacy_va_layout = 0
  687. 687 vm.lowmem_reserve_ratio = 256 256 32 0
  688. 688 vm.max_map_count = 65530
  689. 689 vm.min_free_kbytes = 22528
  690. 690 vm.min_slab_ratio = 5
  691. 691 vm.min_unmapped_ratio = 1
  692. 692 vm.mmap_min_addr = 32768
  693. 693 vm.mmap_rnd_bits = 18
  694. 694 vm.mmap_rnd_compat_bits = 11
  695. 695 vm.nr_hugepages = 0
  696. 696 vm.nr_hugepages_mempolicy = 0
  697. 697 vm.nr_overcommit_hugepages = 0
  698. 698 vm.numa_stat = 1
  699. 699 vm.numa_zonelist_order = Node
  700. 700 vm.oom_dump_tasks = 1
  701. 701 vm.oom_kill_allocating_task = 0
  702. 702 vm.overcommit_kbytes = 0
  703. 703 vm.overcommit_memory = 0
  704. 704 vm.overcommit_ratio = 50
  705. 705 vm.page-cluster = 0
  706. 706 vm.page_lock_unfairness = 5
  707. 707 vm.panic_on_oom = 0
  708. 708 vm.percpu_pagelist_high_fraction = 0
  709. 709 vm.stat_interval = 1
  710. 710
  711. 711 ### [resize2fs] 4GiB or smaller media - leaving 5% spare area. Start resizing partition /dev/mmcblk0p1 now:
  712. 712
  713. 713 vm.swappiness = 100
  714. 714 major minor #blocks name
  715. 715
  716. 716 179 0 1931264 mmcblk0
  717. 717 179 1 1720320 mmcblk0p1
  718. 718 179 32 7634944 mmcblk2
  719. 719 179 33 2045935 mmcblk2p1
  720. 720 179 34 16384 mmcblk2p2
  721. 721 179 35 16384 mmcblk2p3
  722. 722 179 36 32768 mmcblk2p4
  723. 723 179 37 2097152 mmcblk2p5
  724. 724 179 38 307200 mmcblk2p6
  725. 725 179 39 16384 mmcblk2p7
  726. 726 179 40 16384 mmcblk2p8
  727. 727 179 41 32768 mmcblk2p9
  728. 728 179 42 2097152 mmcblk2p10
  729. 729 179 43 16384 mmcblk2p11
  730. 730 179 44 65536 mmcblk2p12
  731. 731 179 45 2048 mmcblk2p13
  732. 732 179 46 32768 mmcblk2p14
  733. 733 179 47 16384 mmcblk2p15
  734. 734 179 48 786432 mmcblk2p16
  735. 735 252 0 1018652 zram0
  736. 736 252 1 51200 zram1
  737. 737
  738. 738 Executing fdisk, fsck and partprobe:
  739. 739 vm.user_reserve_kbytes = 63000
  740. 740 vm.vfs_cache_pressure = 100
  741. 741 vm.watermark_boost_factor = 15000
  742. 742 vm.watermark_scale_factor = 10
  743. 743
  744. 744 Welcome to fdisk (util-linux 2.37.2).
  745. 745 Changes will remain in memory only, until you decide to write them.
  746. 746 Be careful before using the write command.
  747. 747
  748. 748 This disk is currently in use - repartitioning is probably a bad idea.
  749. 749 It's recommended to umount all file systems, and swapoff all swap
  750. 750 partitions on this disk.
  751. 751
  752. 752
  753. 753 Command (m for help):
  754. 754 Selected partition 1
  755. 755 Partition 1 has been deleted.
  756. 756
  757. 757 Command (m for help): Partition type
  758. 758 p primary (0 primary, 0 extended, 4 free)
  759. 759 e extended (container for logical partitions)
  760. 760 Select (default p): Partition number (1-4, default 1): First sector (2048-3862527, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (8192-3862527, default 3862527): vm.zone_reclaim_mode = 0
  761. 761
  762. 762 ### ip addr:
  763. 763
  764. 764 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
  765. 765 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  766. 766 inet XXX.XXX.0.1/8 scope host lo
  767. 767 valid_lft forever preferred_lft forever
  768. 768 inet6 ::1/128 scope host
  769. 769 valid_lft forever preferred_lft forever
  770. 770 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
  771. 771 link/ether 02:07:98:a2:a6:2d brd ff:ff:ff:ff:ff:ff
  772. 772 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
  773. 773 link/ether a4:99:da:28:2f:13 brd ff:ff:ff:ff:ff:ff
  774. 774
  775. 775 ### partitions:
  776. 776
  777. 777 major minor #blocks name
  778. 778
  779. 779 179 0 1931264 mmcblk0
  780. 780 179 1 1720320 mmcblk0p1
  781. 781 179 32 7634944 mmcblk2
  782. 782 179 33 2045935 mmcblk2p1
  783. 783 179 34 16384 mmcblk2p2
  784. 784 179 35 16384 mmcblk2p3
  785. 785 179 36 32768 mmcblk2p4
  786. 786 179 37 2097152 mmcblk2p5
  787. 787 179 38 307200 mmcblk2p6
  788. 788 179 39 16384 mmcblk2p7
  789. 789 179 40 16384 mmcblk2p8
  790. 790 179 41 32768 mmcblk2p9
  791. 791 179 42 2097152 mmcblk2p10
  792. 792 179 43 16384 mmcblk2p11
  793. 793 179 44 65536 mmcblk2p12
  794. 794 179 45 2048 mmcblk2p13
  795. 795 179 46 32768 mmcblk2p14
  796. 796 179 47 16384 mmcblk2p15
  797. 797 179 48 786432 mmcblk2p16
  798. 798 252 0 1018652 zram0
  799. 799 252 1 51200 zram1
  800. 800
  801. 801 ### df:
  802. 802
  803. 803 tmpfs 199M 3.3M 196M 2% /run
  804. 804 /dev/mmcblk0p1 1.6G 1.4G 182M 89% /
  805. 805 tmpfs 995M 0 995M 0% /dev/shm
  806. 806 tmpfs 5.0M 4.0K 5.0M 1% /run/lock
  807. 807 tmpfs 995M 0 995M 0% /tmp
  808. 808 /dev/zram1 47M 656K 43M 2% /var/log
  809. 809
  810. 810 ### lsblk:
  811. 811
  812. 812
  813. 813 Created a new partition 1 of type 'Linux' and of size 1.7 GiB.
  814. 814 Partition #1 contains a ext4 signature.
  815. 815
  816. 816 Command (m for help): NAME FSTYPE SIZE MOUNTPOINT UUID
  817. 817 mmcblk0 1.8G
  818. 818 └─mmcblk0p1 ext4 1.6G / 81cc9469-982a-4232-8db4-540eebdd7c04
  819. 819 mmcblk2 7.3G
  820. 820 ├─mmcblk2p1 f2fs 2G 9b7ef4bd-c41f-449b-ab7e-62bbc5b8d119
  821. 821 ├─mmcblk2p2 vfat 16M
  822. 822 ├─mmcblk2p3 16M
  823. 823 ├─mmcblk2p4 32M
  824. 824 ├─mmcblk2p5 ext4 2G 2cba03d8-ce15-4509-9cbe-1b8e1cee2ed8
  825. 825 ├─mmcblk2p6 ext4 300M 99330148-936b-450c-ba42-a8138adb126c
  826. 826 ├─mmcblk2p7 16M
  827. 827 ├─mmcblk2p8 16M
  828. 828 ├─mmcblk2p9 32M
  829. 829 ├─mmcblk2p10 2G
  830. 830 ├─mmcblk2p11 16M
  831. 831 ├─mmcblk2p12 64M
  832. 832 ├─mmcblk2p13 2M
  833. 833 ├─mmcblk2p14 32M
  834. 834 ├─mmcblk2p15 16M
  835. 835 └─mmcblk2p16 ext4 768M 7d68b65b-c1e2-45a5-8c97-5afaa377ea42
  836. 836 mmcblk2boot0 4M
  837. 837 mmcblk2boot1 4M
  838. 838 zram1 50M /var/log
  839. 839 zram2 0B
  840. 840
  841. 841 ### zramctl:
  842. 842
  843. 843 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT
  844. 844 /dev/zram1 zstd 50M 604K 90.3K 372K 4 /var/log
  845. 845 /dev/zram0 lzo-rle 994.8M 4K 74B 12K 4 [SWAP]
  846. 846
  847. 847 ### mtab:
  848. 848
  849. 849 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0
  850. 850 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0
  851. 851 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0
  852. 852
  853. 853 The partition table has been altered.
  854. 854 Syncing disks.
  855. 855
  856. 856 New partition table:
  857. 857
  858. 858 major minor #blocks name
  859. 859
  860. 860 179 0 1931264 mmcblk0
  861. 861 179 1 1814528 mmcblk0p1
  862. 862 179 32 7634944 mmcblk2
  863. 863 179 33 2045935 mmcblk2p1
  864. 864 179 34 16384 mmcblk2p2
  865. 865 179 35 16384 mmcblk2p3
  866. 866 179 36 32768 mmcblk2p4
  867. 867 179 37 2097152 mmcblk2p5
  868. 868 179 38 307200 mmcblk2p6
  869. 869 179 39 16384 mmcblk2p7
  870. 870 179 40 16384 mmcblk2p8
  871. 871 179 41 32768 mmcblk2p9
  872. 872 179 42 2097152 mmcblk2p10
  873. 873 179 43 16384 mmcblk2p11
  874. 874 179 44 65536 mmcblk2p12
  875. 875 179 45 2048 mmcblk2p13
  876. 876 179 46 32768 mmcblk2p14
  877. 877 179 47 16384 mmcblk2p15
  878. 878 179 48 786432 mmcblk2p16
  879. 879 252 0 1018652 zram0
  880. 880 252 1 51200 zram1
  881. 881
  882. 882 Now trying to resize ext4 filesystem on /dev/mmcblk0p1 to the limits:
  883. 883
  884. 884 resize2fs 1.46.5 (30-Dec-2021)
  885. 885 Filesystem at /dev/mmcblk0p1 is mounted on /; on-line resizing required
  886. 886 old_desc_blocks = 1, new_desc_blocks = 1
  887. 887 The filesystem on /dev/mmcblk0p1 is now 453632 (4k) blocks long.
  888. 888
  889. 889
  890. 890 ### mmc0:e624 info:
  891. 891
  892. 892
  893. 893 ### [resize2fs] Automated reboot needed to finish the resize procedure
  894. 894 fwrev: 0x0
  895. 895 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SU02G MODALIAS=mmc:block
  896. 896 cid: 0353445355303247801896a64a00284b
  897. 897 rca: 0xe624
  898. 898 csd: 002600325f5a83aefefbcfff928040df
  899. 899 manfid: 0x000003
  900. 900 ocr: 0x00200000
  901. 901 preferred_erase_size: 4194304
  902. 902 type: SD
  903. 903 hwrev: 0x8
  904. 904 date: 08/2002
  905. 905 dsr: 0x404
  906. 906 erase_size: 512
  907. 907 oemid: 0x5344
  908. 908 serial: 0x1896a64a
  909. 909 ssr: 0000000000000028000090000b050900000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
  910. 910 scr: 0225800000000000
  911. 911 name: SU02G
  912. 912
  913. 913 ### mmc2:0001 info:
  914. 914
  915. 915 fwrev: 0x0600000000000000
  916. 916 uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=8GTF4R MODALIAS=mmc:block
  917. 917 cid: 150100384754463452067d918f05780b
  918. 918 rel_sectors: 0x1
  919. 919 enhanced_rpmb_supported: 0x1
  920. 920 rca: 0x0001
  921. 921 pre_eol_info: 0x01
  922. 922 csd: d02701320f5903fff6dbffef8e40400d
  923. 923 manfid: 0x000015
  924. 924 ocr: 0x00200000
  925. 925 preferred_erase_size: 4194304
  926. 926 enhanced_area_offset: 18446744073709551594
  927. 927 raw_rpmb_size_mult: 0x4
  928. 928 type: MMC
  929. 929 hwrev: 0x0
  930. 930 date: 07/2021
  931. 931 prv: 0x6
  932. 932 ffu_capable: 1
  933. 933 dsr: 0x404
  934. 934 erase_size: 524288
  935. 935 life_time: 0x01 0x01
  936. 936 enhanced_area_size: 4294967274
  937. 937 oemid: 0x0100
  938. 938 serial: 0x7d918f05
  939. 939 cmdq_en: 0
  940. 940 rev: 0x8
  941. 941 name: 8GTF4R
  942. 942
  943. 943 ### Boot system health:
  944. 944
  945. 945 Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St.
  946. 946 23:09:43: 1800MHz 0.79 49% 23% 14% 0% 11% 0% 43.3°C 0/9
  947. 947 23:09:43: 1488MHz 0.79 9% 6% 2% 0% 0% 0% 43.0°C 0/9
  948. 948 23:09:43: 1800MHz 0.79 9% 7% 1% 1% 0% 0% 40.3°C 0/9
  949. 949 23:09:44: 1704MHz 0.79 10% 6% 2% 1% 0% 0% 40.3°C 0/9
  950. 950 23:09:44: 1800MHz 0.79 9% 7% 2% 0% 0% 0% 38.8°C 0/9
  951. 951
  952. 952 ### quick iozone test: 4 153 924 4668 5021 5071 530
  953. 953
  954. 954 ### [firstrun] Recreated SSH keys (entropy: 256 256)
  955. 955
  956. 956 ### Activated 1 lzo-rle zram swap devices with 994MB each.
  957. 957 ### Activated Armbian ramlog partition with zstd compression
  958. 958
  959. 959 ### Activated 1 lzo-rle zram swap devices with 994MB each.
  960. 960 ### Activated Armbian ramlog partition with zstd compression
  961. 961
  962. 962 Wed Jun 29 01:13:59 AM UTC 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64
  963. 963
  964. 964 ### dmesg:
  965. 965
  966. 966 [ 0.949084] raid6: int64x2 gen() 1046 MB/s
  967. 967 [ 1.017152] raid6: int64x2 xor() 555 MB/s
  968. 968 [ 1.085248] raid6: int64x1 gen() 780 MB/s
  969. 969 [ 1.153313] raid6: int64x1 xor() 405 MB/s
  970. 970 [ 1.153320] raid6: using algorithm neonx4 gen() 1625 MB/s
  971. 971 [ 1.153325] raid6: .... xor() 1176 MB/s, rmw enabled
  972. 972 [ 1.153331] raid6: using neon recovery algorithm
  973. 973 [ 1.154507] iommu: Default domain type: Translated
  974. 974 [ 1.154518] iommu: DMA domain TLB invalidation policy: strict mode
  975. 975 [ 1.154814] SCSI subsystem initialized
  976. 976 [ 1.155004] usbcore: registered new interface driver usbfs
  977. 977 [ 1.155044] usbcore: registered new interface driver hub
  978. 978 [ 1.155083] usbcore: registered new device driver usb
  979. 979 [ 1.155406] pps_core: LinuxPPS API ver. 1 registered
  980. 980 [ 1.155412] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  981. 981 [ 1.155429] PTP clock support registered
  982. 982 [ 1.156116] Advanced Linux Sound Architecture Driver Initialized.
  983. 983 [ 1.156770] NetLabel: Initializing
  984. 984 [ 1.156775] NetLabel: domain hash size = 128
  985. 985 [ 1.156781] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  986. 986 [ 1.156850] NetLabel: unlabeled traffic allowed by default
  987. 987 [ 1.157276] clocksource: Switched to clocksource arch_sys_counter
  988. 988 [ 1.157462] VFS: Disk quotas dquot_6.6.0
  989. 989 [ 1.157521] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  990. 990 [ 1.158102] AppArmor: AppArmor Filesystem Enabled
  991. 991 [ 1.164829] NET: Registered PF_INET protocol family
  992. 992 [ 1.165036] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
  993. 993 [ 1.166300] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  994. 994 [ 1.166342] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  995. 995 [ 1.166359] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  996. 996 [ 1.166507] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
  997. 997 [ 1.166800] TCP: Hash tables configured (established 16384 bind 16384)
  998. 998 [ 1.166918] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  999. 999 [ 1.166980] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  1000. 1000 [ 1.167181] NET: Registered PF_UNIX/PF_LOCAL protocol family
  1001. 1001 [ 1.167712] Trying to unpack rootfs image as initramfs...
  1002. 1002 [ 1.174345] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  1003. 1003 [ 1.180858] Initialise system trusted keyrings
  1004. 1004 [ 1.180935] Key type blacklist registered
  1005. 1005 [ 1.181131] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  1006. 1006 [ 1.186950] zbud: loaded
  1007. 1007 [ 1.188516] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  1008. 1008 [ 1.190911] integrity: Platform Keyring initialized
  1009. 1009 [ 1.239068] xor: automatically using best checksumming function 32regs
  1010. 1010 [ 1.239096] async_tx: api initialized (async)
  1011. 1011 [ 1.239107] Key type asymmetric registered
  1012. 1012 [ 1.239113] Asymmetric key parser 'x509' registered
  1013. 1013 [ 1.239243] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  1014. 1014 [ 1.239395] io scheduler mq-deadline registered
  1015. 1015 [ 1.239402] io scheduler kyber registered
  1016. 1016 [ 1.239595] io scheduler bfq registered
  1017. 1017 [ 1.245219] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
  1018. 1018 [ 1.256775] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
  1019. 1019 [ 1.263605] cacheinfo: Unable to detect cache hierarchy for CPU 0
  1020. 1020 [ 1.267792] loop: module loaded
  1021. 1021 [ 1.270294] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1022. 1022 [ 1.270325] ehci-platform: EHCI generic platform driver
  1023. 1023 [ 1.270491] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1024. 1024 [ 1.270525] ohci-platform: OHCI generic platform driver
  1025. 1025 [ 1.271020] usbcore: registered new interface driver usb-storage
  1026. 1026 [ 1.271550] mousedev: PS/2 mouse device common for all mice
  1027. 1027 [ 1.272509] sun6i-rtc 7000000.rtc: registered as rtc0
  1028. 1028 [ 1.272547] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
  1029. 1029 [ 1.272653] sun6i-rtc 7000000.rtc: RTC enabled
  1030. 1030 [ 1.272791] i2c_dev: i2c /dev entries driver
  1031. 1031 [ 1.273602] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  1032. 1032 [ 1.275131] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pm not found, using dummy regulator
  1033. 1033 [ 1.275536] sdhci: Secure Digital Host Controller Interface driver
  1034. 1034 [ 1.275545] sdhci: Copyright(c) Pierre Ossman
  1035. 1035 [ 1.275569] Synopsys Designware Multimedia Card Interface Driver
  1036. 1036 [ 1.276358] sdhci-pltfm: SDHCI platform and OF driver helper
  1037. 1037 [ 1.276527] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator
  1038. 1038 [ 1.277715] ledtrig-cpu: registered to indicate activity on CPUs
  1039. 1039 [ 1.278305] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
  1040. 1040 [ 1.278601] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  1041. 1041 [ 1.278729] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  1042. 1042 [ 1.278828] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  1043. 1043 [ 1.278923] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  1044. 1044 [ 1.279004] sun8i-ce 1904000.crypto: Register cbc(aes)
  1045. 1045 [ 1.279155] sun8i-ce 1904000.crypto: Register ecb(aes)
  1046. 1046 [ 1.279269] sun8i-ce 1904000.crypto: Register cbc(des3_ede)
  1047. 1047 [ 1.279381] sun8i-ce 1904000.crypto: Register ecb(des3_ede)
  1048. 1048 [ 1.279492] sun8i-ce 1904000.crypto: Register md5
  1049. 1049 [ 1.279601] sun8i-ce 1904000.crypto: Register sha1
  1050. 1050 [ 1.279711] sun8i-ce 1904000.crypto: Register sha224
  1051. 1051 [ 1.279823] sun8i-ce 1904000.crypto: Register sha256
  1052. 1052 [ 1.279933] sun8i-ce 1904000.crypto: Register sha384
  1053. 1053 [ 1.280044] sun8i-ce 1904000.crypto: Register sha512
  1054. 1054 [ 1.280159] sun8i-ce 1904000.crypto: Register stdrng
  1055. 1055 [ 1.280892] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0
  1056. 1056 [ 1.281526] hid: raw HID events driver (C) Jiri Kosina
  1057. 1057 [ 1.281670] usbcore: registered new interface driver usbhid
  1058. 1058 [ 1.281678] usbhid: USB HID core driver
  1059. 1059 [ 1.282403] random: crng init done
  1060. 1060 [ 1.284582] NET: Registered PF_INET6 protocol family
  1061. 1061 [ 1.870882] Freeing initrd memory: 12684K
  1062. 1062 [ 1.899856] Segment Routing with IPv6
  1063. 1063 [ 1.899922] In-situ OAM (IOAM) with IPv6
  1064. 1064 [ 1.900015] NET: Registered PF_PACKET protocol family
  1065. 1065 [ 1.900122] 8021q: 802.1Q VLAN Support v1.8
  1066. 1066 [ 1.900272] 9pnet: Installing 9P2000 support
  1067. 1067 [ 1.900346] Key type dns_resolver registered
  1068. 1068 [ 1.900792] registered taskstats version 1
  1069. 1069 [ 1.900808] Loading compiled-in X.509 certificates
  1070. 1070 [ 1.904668] Loaded X.509 cert 'Build time autogenerated kernel key: 32330adefd2da02e444296fafd37464380789679'
  1071. 1071 [ 1.907610] zswap: loaded using pool zstd/z3fold
  1072. 1072 [ 1.908225] Key type ._fscrypt registered
  1073. 1073 [ 1.908233] Key type .fscrypt registered
  1074. 1074 [ 1.908238] Key type fscrypt-provisioning registered
  1075. 1075 [ 1.909246] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no
  1076. 1076 [ 1.923150] Key type encrypted registered
  1077. 1077 [ 1.923181] AppArmor: AppArmor sha1 policy hashing enabled
  1078. 1078 [ 1.923220] ima: No TPM chip found, activating TPM-bypass!
  1079. 1079 [ 1.923251] ima: Allocated hash algorithm: sha1
  1080. 1080 [ 1.923284] ima: No architecture policies found
  1081. 1081 [ 1.923332] evm: Initialising EVM extended attributes:
  1082. 1082 [ 1.923336] evm: security.selinux
  1083. 1083 [ 1.923341] evm: security.SMACK64
  1084. 1084 [ 1.923346] evm: security.SMACK64EXEC
  1085. 1085 [ 1.923350] evm: security.SMACK64TRANSMUTE
  1086. 1086 [ 1.923354] evm: security.SMACK64MMAP
  1087. 1087 [ 1.923358] evm: security.apparmor
  1088. 1088 [ 1.923362] evm: security.ima
  1089. 1089 [ 1.923366] evm: security.capability
  1090. 1090 [ 1.923370] evm: HMAC attrs: 0x1
  1091. 1091 [ 1.936396] platform 1100000.mixer: Fixing up cyclic dependency with 6510000.tcon-top
  1092. 1092 [ 1.936746] sun8i-mixer 1100000.mixer: Adding to iommu group 0
  1093. 1093 [ 1.938819] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  1094. 1094 [ 1.938852] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
  1095. 1095 [ 1.939002] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010
  1096. 1096 [ 1.939071] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x05200000
  1097. 1097 [ 1.939543] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
  1098. 1098 [ 1.939558] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1099. 1099 [ 1.939569] usb usb1: Product: xHCI Host Controller
  1100. 1100 [ 1.939578] usb usb1: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd
  1101. 1101 [ 1.939586] usb usb1: SerialNumber: xhci-hcd.1.auto
  1102. 1102 [ 1.940117] hub 1-0:1.0: USB hub found
  1103. 1103 [ 1.940162] hub 1-0:1.0: 1 port detected
  1104. 1104 [ 1.940494] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  1105. 1105 [ 1.940513] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
  1106. 1106 [ 1.940532] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  1107. 1107 [ 1.940621] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  1108. 1108 [ 1.940777] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
  1109. 1109 [ 1.940790] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1110. 1110 [ 1.940801] usb usb2: Product: xHCI Host Controller
  1111. 1111 [ 1.940809] usb usb2: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd
  1112. 1112 [ 1.940817] usb usb2: SerialNumber: xhci-hcd.1.auto
  1113. 1113 [ 1.941217] hub 2-0:1.0: USB hub found
  1114. 1114 [ 1.941257] hub 2-0:1.0: 1 port detected
  1115. 1115 [ 1.943864] sun50i_cpufreq_nvmem: Using CPU speed bin speed0
  1116. 1116 [ 1.945699] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version
  1117. 1117 [ 1.952027] of_cfs_init
  1118. 1118 [ 1.952140] of_cfs_init: OK
  1119. 1119 [ 1.952469] ALSA device list:
  1120. 1120 [ 1.952476] No soundcards found.
  1121. 1121 [ 1.953654] Freeing unused kernel memory: 2496K
  1122. 1122 [ 1.969360] Run /init as init process
  1123. 1123 [ 1.969368] with arguments:
  1124. 1124 [ 1.969375] /init
  1125. 1125 [ 1.969380] with environment:
  1126. 1126 [ 1.969385] HOME=/
  1127. 1127 [ 1.969389] TERM=linux
  1128. 1128 [ 1.969394] ubootpart=deddb4e0-01
  1129. 1129 [ 1.969399] cgroup_enable=memory
  1130. 1130 [ 2.394660] axp20x-i2c 0-0036: AXP20x variant AXP806 found
  1131. 1131 [ 2.411554] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input0
  1132. 1132 [ 2.415639] vdd-cpu: supplied by vcc-5v
  1133. 1133 [ 2.417697] vdd-gpu: supplied by vcc-5v
  1134. 1134 [ 2.418631] vdd-sys: Bringing 900000uV into 960000-960000uV
  1135. 1135 [ 2.419027] vdd-sys: supplied by vcc-5v
  1136. 1136 [ 2.421405] vcc-dram: supplied by vcc-5v
  1137. 1137 [ 2.422233] vcc-pl-led-ir: supplied by vcc-5v
  1138. 1138 [ 2.422886] vcc33-audio-tv-ephy-mac: Bringing 700000uV into 3300000-3300000uV
  1139. 1139 [ 2.423237] vcc33-audio-tv-ephy-mac: supplied by vcc-5v
  1140. 1140 [ 2.534053] vcc33-io-pd-emmc-sd-usb-uart-1: Bringing 700000uV into 3300000-3300000uV
  1141. 1141 [ 2.534413] vcc33-io-pd-emmc-sd-usb-uart-1: supplied by vcc-5v
  1142. 1142 [ 2.535415] vcc18-dram-bias-pll: supplied by vcc-5v
  1143. 1143 [ 2.536512] vcc-efuse-pcie-hdmi-pc: supplied by vcc-5v
  1144. 1144 [ 2.537146] vcc-wifi-io-pm-pg: Bringing 700000uV into 1800000-1800000uV
  1145. 1145 [ 2.537484] vcc-wifi-io-pm-pg: supplied by vcc-5v
  1146. 1146 [ 2.538592] bldo4: supplied by vcc-5v
  1147. 1147 [ 2.539110] vcc33-io-pd-emmc-sd-usb-uart-2: supplied by vcc-5v
  1148. 1148 [ 2.539883] cldo2: supplied by vcc-5v
  1149. 1149 [ 2.540548] cldo3: supplied by vcc-5v
  1150. 1150 [ 2.540794] sw: supplied by regulator-dummy
  1151. 1151 [ 2.541362] axp20x-i2c 0-0036: AXP20X driver loaded
  1152. 1152 [ 2.547690] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
  1153. 1153 [ 2.548198] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pb not found, using dummy regulator
  1154. 1154 [ 2.549117] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator
  1155. 1155 [ 2.550892] printk: console [ttyS0] disabled
  1156. 1156 [ 2.551013] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 35, base_baud = 1500000) is a 16550A
  1157. 1157 [ 2.551237] printk: console [ttyS0] enabled
  1158. 1158 [ 2.552795] sun4i-drm display-engine: Adding to iommu group 0
  1159. 1159 [ 2.572355] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e16990)
  1160. 1160 [ 2.572631] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e1abb8)
  1161. 1161 [ 2.572958] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e11ba0)
  1162. 1162 [ 2.573045] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator
  1163. 1163 [ 2.573595] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
  1164. 1164 [ 2.573942] sun8i-dw-hdmi 6000000.hdmi: EVENT=plugin
  1165. 1165 [ 2.574215] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
  1166. 1166 [ 2.574653] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e15cc8)
  1167. 1167 [ 2.576464] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
  1168. 1168 [ 2.576523] sun8i-dw-hdmi 6000000.hdmi: read_hpd result: 1
  1169. 1169 [ 2.731507] Console: switching to colour frame buffer device 240x67
  1170. 1170 [ 2.781345] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device
  1171. 1171 [ 2.805081] acx00-codec acx00-codec: DMA mask not set
  1172. 1172 [ 2.807867] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  1173. 1173 [ 2.809161] vcc-wifi-io: supplied by vcc33-wifi
  1174. 1174 [ 2.809648] sunxi-mmc 4020000.mmc: Got CD GPIO
  1175. 1175 [ 2.812787] ehci-platform 5101000.usb: EHCI Host Controller
  1176. 1176 [ 2.812942] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 3
  1177. 1177 [ 2.813104] ehci-platform 5101000.usb: irq 41, io mem 0x05101000
  1178. 1178 [ 2.825297] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
  1179. 1179 [ 2.825624] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
  1180. 1180 [ 2.825639] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1181. 1181 [ 2.825650] usb usb3: Product: EHCI Host Controller
  1182. 1182 [ 2.825659] usb usb3: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd
  1183. 1183 [ 2.825667] usb usb3: SerialNumber: 5101000.usb
  1184. 1184 [ 2.826241] hub 3-0:1.0: USB hub found
  1185. 1185 [ 2.826289] hub 3-0:1.0: 1 port detected
  1186. 1186 [ 2.827379] ehci-platform 5311000.usb: EHCI Host Controller
  1187. 1187 [ 2.827417] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 4
  1188. 1188 [ 2.827561] ehci-platform 5311000.usb: irq 44, io mem 0x05311000
  1189. 1189 [ 2.833343] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
  1190. 1190 [ 2.833620] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  1191. 1191 [ 2.841297] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00
  1192. 1192 [ 2.841641] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
  1193. 1193 [ 2.841656] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1194. 1194 [ 2.841666] usb usb4: Product: EHCI Host Controller
  1195. 1195 [ 2.841675] usb usb4: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd
  1196. 1196 [ 2.841684] usb usb4: SerialNumber: 5311000.usb
  1197. 1197 [ 2.842260] hub 4-0:1.0: USB hub found
  1198. 1198 [ 2.842303] hub 4-0:1.0: 1 port detected
  1199. 1199 [ 2.843479] ohci-platform 5101400.usb: Generic Platform OHCI controller
  1200. 1200 [ 2.843565] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 5
  1201. 1201 [ 2.843715] ohci-platform 5101400.usb: irq 42, io mem 0x05101400
  1202. 1202 [ 2.884522] mmc0: host does not support reading read-only switch, assuming write-enable
  1203. 1203 [ 2.888426] mmc0: new high speed SD card at address e624
  1204. 1204 [ 2.889346] mmcblk0: mmc0:e624 SU02G 1.84 GiB
  1205. 1205 [ 2.891673] mmcblk0: p1
  1206. 1206 [ 2.909555] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
  1207. 1207 [ 2.909580] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1208. 1208 [ 2.909590] usb usb5: Product: Generic Platform OHCI controller
  1209. 1209 [ 2.909599] usb usb5: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd
  1210. 1210 [ 2.909608] usb usb5: SerialNumber: 5101400.usb
  1211. 1211 [ 2.910223] hub 5-0:1.0: USB hub found
  1212. 1212 [ 2.910273] hub 5-0:1.0: 1 port detected
  1213. 1213 [ 2.911361] ohci-platform 5311400.usb: Generic Platform OHCI controller
  1214. 1214 [ 2.911413] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6
  1215. 1215 [ 2.911563] ohci-platform 5311400.usb: irq 45, io mem 0x05311400
  1216. 1216 [ 2.973514] mmc2: new HS200 MMC card at address 0001
  1217. 1217 [ 2.973615] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
  1218. 1218 [ 2.973632] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1219. 1219 [ 2.973642] usb usb6: Product: Generic Platform OHCI controller
  1220. 1220 [ 2.973651] usb usb6: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd
  1221. 1221 [ 2.973659] usb usb6: SerialNumber: 5311400.usb
  1222. 1222 [ 2.974665] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB
  1223. 1223 [ 2.975313] hub 6-0:1.0: USB hub found
  1224. 1224 [ 2.975381] hub 6-0:1.0: 1 port detected
  1225. 1225 [ 2.977595] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator
  1226. 1226 [ 2.977878] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests
  1227. 1227 [ 2.983981] Alternate GPT is invalid, using primary GPT.
  1228. 1228 [ 2.984072] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16
  1229. 1229 [ 2.986831] mmcblk2boot0: mmc2:0001 8GTF4R 4.00 MiB
  1230. 1230 [ 2.988599] mmcblk2boot1: mmc2:0001 8GTF4R 4.00 MiB
  1231. 1231 [ 3.078024] musb-hdrc musb-hdrc.5.auto: MUSB HDRC host driver
  1232. 1232 [ 3.078067] musb-hdrc musb-hdrc.5.auto: new USB bus registered, assigned bus number 7
  1233. 1233 [ 3.078376] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
  1234. 1234 [ 3.078395] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1235. 1235 [ 3.078406] usb usb7: Product: MUSB HDRC host driver
  1236. 1236 [ 3.078415] usb usb7: Manufacturer: Linux 5.15.48-sunxi64 musb-hcd
  1237. 1237 [ 3.078423] usb usb7: SerialNumber: musb-hdrc.5.auto
  1238. 1238 [ 3.079210] hub 7-0:1.0: USB hub found
  1239. 1239 [ 3.079301] hub 7-0:1.0: 1 port detected
  1240. 1240 [ 3.095148] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found
  1241. 1241 [ 3.095181] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found
  1242. 1242 [ 3.095570] dwmac-sun8i 5020000.ethernet: supply phy-io not found, using dummy regulator
  1243. 1243 [ 3.095826] dwmac-sun8i 5020000.ethernet: PTP uses main clock
  1244. 1244 [ 3.095873] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000)
  1245. 1245 [ 3.201638] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported
  1246. 1246 [ 3.201666] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported
  1247. 1247 [ 3.201673] dwmac-sun8i 5020000.ethernet: COE Type 2
  1248. 1248 [ 3.201684] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported
  1249. 1249 [ 3.201692] dwmac-sun8i 5020000.ethernet: Normal descriptors
  1250. 1250 [ 3.201699] dwmac-sun8i 5020000.ethernet: Chain mode enabled
  1251. 1251 [ 4.246771] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq
  1252. 1252 [ 4.477855] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  1253. 1253 [ 4.495103] mmc1: new high speed SDIO card at address 8800
  1254. 1254 [ 4.676078] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none.
  1255. 1255 [ 5.553926] systemd[1]: System time before build time, advancing clock.
  1256. 1256 [ 5.601327] systemd[1]: systemd 249.11-0ubuntu3.1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
  1257. 1257 [ 5.601996] systemd[1]: Detected architecture arm64.
  1258. 1258 [ 5.605320] systemd[1]: Hostname set to <orangepi3-lts>.
  1259. 1259 [ 6.671398] systemd[1]: Queued start job for default target Graphical Interface.
  1260. 1260 [ 6.676854] systemd[1]: Created slice Slice /system/modprobe.
  1261. 1261 [ 6.679570] systemd[1]: Created slice Slice /system/serial-getty.
  1262. 1262 [ 6.681488] systemd[1]: Created slice User and Session Slice.
  1263. 1263 [ 6.682353] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active.
  1264. 1264 [ 6.683095] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  1265. 1265 [ 6.684342] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  1266. 1266 [ 6.684972] systemd[1]: Reached target Local Encrypted Volumes.
  1267. 1267 [ 6.685751] systemd[1]: Reached target Slice Units.
  1268. 1268 [ 6.686091] systemd[1]: Reached target Swaps.
  1269. 1269 [ 6.686388] systemd[1]: Reached target System Time Set.
  1270. 1270 [ 6.686885] systemd[1]: Reached target Local Verity Protected Volumes.
  1271. 1271 [ 6.705715] systemd[1]: Listening on RPCbind Server Activation Socket.
  1272. 1272 [ 6.707057] systemd[1]: Listening on Syslog Socket.
  1273. 1273 [ 6.707982] systemd[1]: Listening on fsck to fsckd communication Socket.
  1274. 1274 [ 6.708639] systemd[1]: Listening on initctl Compatibility Named Pipe.
  1275. 1275 [ 6.710143] systemd[1]: Listening on Journal Audit Socket.
  1276. 1276 [ 6.711131] systemd[1]: Listening on Journal Socket (/dev/log).
  1277. 1277 [ 6.712198] systemd[1]: Listening on Journal Socket.
  1278. 1278 [ 6.713549] systemd[1]: Listening on udev Control Socket.
  1279. 1279 [ 6.714539] systemd[1]: Listening on udev Kernel Socket.
  1280. 1280 [ 6.714932] systemd[1]: Reached target Socket Units.
  1281. 1281 [ 6.719327] systemd[1]: Mounting Huge Pages File System...
  1282. 1282 [ 6.724457] systemd[1]: Mounting POSIX Message Queue File System...
  1283. 1283 [ 6.729666] systemd[1]: Mounting NFSD configuration filesystem...
  1284. 1284 [ 6.735607] systemd[1]: Mounting Kernel Debug File System...
  1285. 1285 [ 6.736829] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  1286. 1286 [ 6.737749] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
  1287. 1287 [ 6.745181] systemd[1]: Starting Restore / save the current clock...
  1288. 1288 [ 6.756578] systemd[1]: Starting Set the console keyboard layout...
  1289. 1289 [ 6.762511] systemd[1]: Starting Create List of Static Device Nodes...
  1290. 1290 [ 6.769408] systemd[1]: Starting Load Kernel Module configfs...
  1291. 1291 [ 6.776230] systemd[1]: Starting Load Kernel Module drm...
  1292. 1292 [ 6.783051] systemd[1]: Starting Load Kernel Module fuse...
  1293. 1293 [ 6.789230] systemd[1]: Started Nameserver information manager.
  1294. 1294 [ 6.790541] systemd[1]: Reached target Preparation for Network.
  1295. 1295 [ 6.791743] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
  1296. 1296 [ 6.820247] systemd[1]: Starting Load Kernel Modules...
  1297. 1297 [ 6.826784] systemd[1]: Starting Remount Root and Kernel File Systems...
  1298. 1298 [ 6.832755] systemd[1]: Starting Coldplug All udev Devices...
  1299. 1299 [ 6.842632] fuse: init (API version 7.34)
  1300. 1300 [ 6.844956] systemd[1]: Mounted Huge Pages File System.
  1301. 1301 [ 6.846886] systemd[1]: Mounted POSIX Message Queue File System.
  1302. 1302 [ 6.848267] systemd[1]: Mounted Kernel Debug File System.
  1303. 1303 [ 6.850932] systemd[1]: Finished Restore / save the current clock.
  1304. 1304 [ 6.853776] systemd[1]: Finished Create List of Static Device Nodes.
  1305. 1305 [ 6.856015] systemd[1]: [email protected]: Deactivated successfully.
  1306. 1306 [ 6.857228] systemd[1]: Finished Load Kernel Module configfs.
  1307. 1307 [ 6.859516] systemd[1]: [email protected]: Deactivated successfully.
  1308. 1308 [ 6.860778] systemd[1]: Finished Load Kernel Module drm.
  1309. 1309 [ 6.863086] systemd[1]: [email protected]: Deactivated successfully.
  1310. 1310 [ 6.864307] systemd[1]: Finished Load Kernel Module fuse.
  1311. 1311 [ 6.872700] systemd[1]: Mounting FUSE Control File System...
  1312. 1312 [ 6.878878] systemd[1]: Mounting Kernel Configuration File System...
  1313. 1313 [ 6.889133] systemd[1]: Mounted FUSE Control File System.
  1314. 1314 [ 6.890737] systemd[1]: Mounted Kernel Configuration File System.
  1315. 1315 [ 6.893112] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none.
  1316. 1316 [ 6.895850] RPC: Registered named UNIX socket transport module.
  1317. 1317 [ 6.895875] RPC: Registered udp transport module.
  1318. 1318 [ 6.895880] RPC: Registered tcp transport module.
  1319. 1319 [ 6.895883] RPC: Registered tcp NFSv4.1 backchannel transport module.
  1320. 1320 [ 6.900115] systemd[1]: Finished Remount Root and Kernel File Systems.
  1321. 1321 [ 6.908133] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  1322. 1322 [ 6.913155] systemd[1]: Starting Load/Save Random Seed...
  1323. 1323 [ 6.926121] systemd[1]: Starting Create System Users...
  1324. 1324 [ 7.080880] WCN: marlin_init entry!
  1325. 1325 [ 7.081551] WCN: wcn config bt wake host
  1326. 1326 [ 7.081792] WCN_ERR: dts node for bt_wake not found
  1327. 1327 [ 7.081796] WCN: marlin2 parse_dt some para not config
  1328. 1328 [ 7.081814] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840
  1329. 1329 [ 7.087112] sdiohal:sdiohal_init ok
  1330. 1330 [ 7.087870] WCN: marlin_probe ok!
  1331. 1331 [ 7.122791] Installing knfsd (copyright (C) 1996 [email protected]).
  1332. 1332 [ 7.131356] mtty_probe init device addr: 0x0000000060976d25
  1333. 1333 [ 7.131588] -->rfkill_bluetooth_init
  1334. 1334 [ 7.131733] bluetooth_set_power: start_block=1
  1335. 1335 [ 7.131745] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0
  1336. 1336 [ 7.131754] bluetooth_set_power: end_block=1
  1337. 1337 [ 7.131773] <--rfkill_bluetooth_init
  1338. 1338 [ 7.132146] systemd[1]: Mounted NFSD configuration filesystem.
  1339. 1339 [ 7.141526] systemd[1]: Finished Create System Users.
  1340. 1340 [ 7.153988] systemd[1]: Starting Create Static Device Nodes in /dev...
  1341. 1341 [ 7.233797] systemd[1]: Finished Set the console keyboard layout.
  1342. 1342 [ 7.337816] systemd[1]: Finished Load/Save Random Seed.
  1343. 1343 [ 7.345549] systemd[1]: Condition check resulted in First Boot Complete being skipped.
  1344. 1344 [ 7.380866] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  1345. 1345 [ 7.382643] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  1346. 1346 [ 7.393249] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9
  1347. 1347 [ 7.393397] [ADDR_MGT] addr_mgt_probe: success.
  1348. 1348 [ 7.441926] WCN: start_marlin [MARLIN_WIFI]
  1349. 1349 [ 7.441952] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1
  1350. 1350 [ 7.441959] WCN: the first power on start
  1351. 1351 [ 7.450564] systemd[1]: Finished Create Static Device Nodes in /dev.
  1352. 1352 [ 7.459387] systemd[1]: Finished Coldplug All udev Devices.
  1353. 1353 [ 7.466438] systemd[1]: Reached target Preparation for Local File Systems.
  1354. 1354 [ 7.478517] systemd[1]: Mounting /tmp...
  1355. 1355 [ 7.491590] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
  1356. 1356 [ 7.505952] systemd[1]: Starting Rule-based Manager for Device Events and Files...
  1357. 1357 [ 7.516739] systemd[1]: Mounted /tmp.
  1358. 1358 [ 7.525727] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
  1359. 1359 [ 7.533325] systemd[1]: Reached target Local File Systems.
  1360. 1360 [ 7.545524] systemd[1]: Starting Armbian leds state...
  1361. 1361 [ 7.549327] WCN: marlin chip en dummy pull up -- need manually set GPIO
  1362. 1362 [ 7.558097] systemd[1]: Starting Armbian ZRAM config...
  1363. 1363 [ 7.571167] systemd[1]: Starting Set console font and keymap...
  1364. 1364 [ 7.577322] sdiohal:sdiohal_scan_card
  1365. 1365 [ 7.577537] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=50000000
  1366. 1366 [ 7.577644] WCN: marlin_scan_finish!
  1367. 1367 [ 7.577649] sdiohal:probe ok
  1368. 1368 [ 7.577793] sdiohal:scan end!
  1369. 1369 [ 7.577799] WCN: then marlin start to download
  1370. 1370 [ 7.578021] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001
  1371. 1371 [ 7.578036] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start!
  1372. 1372 [ 7.578737] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped.
  1373. 1373 [ 7.579069] systemd[1]: Condition check resulted in Mark the need to relabel after reboot being skipped.
  1374. 1374 [ 7.602702] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  1375. 1375 [ 7.602926] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  1376. 1376 [ 7.603160] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  1377. 1377 [ 7.611166] systemd[1]: Finished Set console font and keymap.
  1378. 1378 [ 7.744586] systemd[1]: Finished Armbian leds state.
  1379. 1379 [ 7.889600] systemd[1]: Started Rule-based Manager for Device Events and Files.
  1380. 1380 [ 7.949232] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  1381. 1381 [ 7.971199] systemd[1]: Starting Load/Save RF Kill Switch Status...
  1382. 1382 [ 8.104176] bluetooth_set_power: start_block=0
  1383. 1383 [ 8.104202] WCN: start_marlin [MARLIN_BLUETOOTH]
  1384. 1384 [ 8.161840] zram: Added device: zram0
  1385. 1385 [ 8.162477] zram: Added device: zram1
  1386. 1386 [ 8.179400] mc: Linux media interface: v0.10
  1387. 1387 [ 8.215814] videodev: Linux video capture interface: v2.00
  1388. 1388 [ 8.219144] zram: Added device: zram2
  1389. 1389 [ 8.242926] panfrost 1800000.gpu: clock rate = 432000000
  1390. 1390 [ 8.242962] panfrost 1800000.gpu: bus_clock rate = 100000000
  1391. 1391 [ 8.253643] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0
  1392. 1392 [ 8.253671] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400
  1393. 1393 [ 8.253680] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7
  1394. 1394 [ 8.253688] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1
  1395. 1395 [ 8.268464] [drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 1
  1396. 1396 [ 8.325492] systemd[1]: Found device /dev/ttyS0.
  1397. 1397 [ 8.416997] zram0: detected capacity change from 0 to 2037304
  1398. 1398 [ 8.489255] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned.
  1399. 1399 [ 8.490302] cedrus 1c0e000.video-codec: Adding to iommu group 0
  1400. 1400 [ 8.491227] cedrus 1c0e000.video-codec: Device registered as /dev/video0
  1401. 1401 [ 8.525844] WCN: combin_img 0 marlin_firmware_write finish and successful
  1402. 1402 [ 8.526216] WCN: marlin_start_run read reset reg val:0x1
  1403. 1403 [ 8.526249] WCN: after do marlin_start_run reset reg val:0x0
  1404. 1404 [ 8.526424] WCN: s_marlin_bootup_time=8526423633
  1405. 1405 [ 8.533074] WCN: clock mode: TSX
  1406. 1406 [ 8.533322] WCN: marlin_write_cali_data sync init_state:0xffffffff
  1407. 1407 [ 8.542522] Adding 1018648k swap on /dev/zram0. Priority:5 extents:1 across:1018648k SSFS
  1408. 1408 [ 8.561555] WCN: marlin_write_cali_data sync init_state:0xffffffff
  1409. 1409 [ 8.589533] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1
  1410. 1410 [ 8.589562] WCN: sdio_config bt_wake_host trigger:[high]
  1411. 1411 [ 8.589566] WCN: sdio_config irq:[inband]
  1412. 1412 [ 8.589568] WCN: sdio_config wake_host_level_duration_time:[20ms]
  1413. 1413 [ 8.589573] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse]
  1414. 1414 [ 8.589575] WCN: marlin_send_sdio_config_to_cp sdio_config:0x80f01 (enable config)
  1415. 1415 [ 8.589923] WCN: marlin_write_cali_data finish
  1416. 1416 [ 8.590128] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  1417. 1417 [ 8.605411] Registered IR keymap rc-empty
  1418. 1418 [ 8.605555] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0
  1419. 1419 [ 8.605721] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
  1420. 1420 [ 8.605824] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input1
  1421. 1421 [ 8.608404] sunxi-ir 7040000.ir: initialized sunXi IR driver
  1422. 1422 [ 8.617568] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  1423. 1423 [ 8.645528] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  1424. 1424 [ 8.673563] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  1425. 1425 [ 8.703123] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0
  1426. 1426 [ 8.703149] WCN: marlin_bind_verify confuse data: 0xcfe38251b04db73419dc5cae40581e72
  1427. 1427 [ 8.703167] WCN: marlin_bind_verify verify data: 0x1ed7454972563e2294bc7cf590020acc
  1428. 1428 [ 8.704066] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0
  1429. 1429 [ 8.704100] sdiohal:sdiohal_runtime_get entry
  1430. 1430 [ 8.709643] WCN: get_cp2_version entry!
  1431. 1431 [ 8.711308] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~
  1432. 1432 [ 8.711345] WCN: switch_cp2_log - close entry!
  1433. 1433 [ 8.712770] WCN: WCND at cmd read:OK
  1434. 1434 [ 8.714056] WCN: then marlin download finished and run ok
  1435. 1435 [ 8.714102] WCN: start_loopcheck
  1436. 1436 [ 8.714128] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1
  1437. 1437 [ 8.714135] WCN: marlin have open, GNSS is closed
  1438. 1438 [ 8.714139] bluetooth_set_power: end_block=0
  1439. 1439 [ 8.715385] systemd[1]: Started Load/Save RF Kill Switch Status.
  1440. 1440 [ 8.738294] WCN: get_board_ant_num [one_ant]
  1441. 1441 [ 8.738321] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini
  1442. 1442 [ 8.770799] zram1: detected capacity change from 0 to 102400
  1443. 1443 [ 8.813748] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings.
  1444. 1444 [ 8.820191] systemd[1]: Finished Load Kernel Modules.
  1445. 1445 [ 8.847004] systemd[1]: Starting Apply Kernel Variables...
  1446. 1446 [ 8.920624] systemd[1]: Finished Armbian ZRAM config.
  1447. 1447 [ 8.926679] systemd[1]: Finished Apply Kernel Variables.
  1448. 1448 [ 8.935295] systemd[1]: Starting Armbian memory supported logging...
  1449. 1449 [ 8.992781] systemd[1]: Starting Raise network interfaces...
  1450. 1450 [ 9.029488] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  1451. 1451 [ 9.034160] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  1452. 1452 [ 9.034609] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  1453. 1453 [ 9.034748] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  1454. 1454 [ 9.034906] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  1455. 1455 [ 9.035048] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  1456. 1456 [ 9.039018] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none.
  1457. 1457 [ 9.528249] systemd[1]: Finished Raise network interfaces.
  1458. 1458 [ 9.989808] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  1459. 1459 [ 9.990116] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  1460. 1460 [ 9.990180] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  1461. 1461 [ 9.990275] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  1462. 1462 [ 9.990341] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  1463. 1463 [ 10.807560] systemd[1]: Finished Armbian memory supported logging.
  1464. 1464 [ 10.816357] systemd[1]: Starting Journal Service...
  1465. 1465 [ 10.942041] systemd[1]: Started Journal Service.
  1466. 1466 [ 10.968596] systemd-journald[678]: Received client request to flush runtime journal.
  1467. 1467
  1468. 1468 ### armbian-release:
  1469. 1469
  1470. 1470 # PLEASE DO NOT EDIT THIS FILE
  1471. 1471 BOARD=orangepi3-lts
  1472. 1472 BOARD_NAME="Orange Pi 3 LTS"
  1473. 1473 BOARDFAMILY=sun50iw6
  1474. 1474 BUILD_REPOSITORY_URL=https://github.com/armbian/build
  1475. 1475 BUILD_REPOSITORY_COMMIT=13f5fba13c
  1476. 1476 VERSION=22.05.3
  1477. 1477 LINUXFAMILY=sunxi64
  1478. 1478 ARCH=arm64
  1479. 1479 IMAGE_TYPE=stable
  1480. 1480 BOARD_TYPE=conf
  1481. 1481 INITRD_ARCH=arm64
  1482. 1482 KERNEL_IMAGE_TYPE=stable
  1483. 1483 BRANCH=current
  1484. 1484
  1485. 1485 ### boot environment:
  1486. 1486
  1487. 1487 verbosity=1
  1488. 1488 bootlogo=false
  1489. 1489 console=both
  1490. 1490 disp_mode=1920x1080p60
  1491. 1491 overlay_prefix=sun50i-h6
  1492. 1492 rootdev=UUID=81cc9469-982a-4232-8db4-540eebdd7c04
  1493. 1493 rootfstype=ext4
  1494. 1494 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u
  1495. 1495
  1496. 1496 ### lsusb:
  1497. 1497
  1498. 1498 Wed Jun 29 01:13:59 AM UTC 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64
  1499. 1499 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  1500. 1500 Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  1501. 1501 Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  1502. 1502 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  1503. 1503 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  1504. 1504 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  1505. 1505 Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  1506. 1506
  1507. 1507 ### lscpu:
  1508. 1508
  1509. 1509 Architecture: aarch64
  1510. 1510 CPU op-mode(s): 32-bit, 64-bit
  1511. 1511 Byte Order: Little Endian
  1512. 1512 CPU(s): 4
  1513. 1513 On-line CPU(s) list: 0-3
  1514. 1514 Vendor ID: ARM
  1515. 1515 Model name: Cortex-A53
  1516. 1516 Model: 4
  1517. 1517 Thread(s) per core: 1
  1518. 1518 Core(s) per cluster: 4
  1519. 1519 Socket(s): -
  1520. 1520 Cluster(s): 1
  1521. 1521 Stepping: r0p4
  1522. 1522 CPU max MHz: 1800.0000
  1523. 1523 CPU min MHz: 480.0000
  1524. 1524 BogoMIPS: 48.00
  1525. 1525 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  1526. 1526 NUMA node(s): 1
  1527. 1527 NUMA node0 CPU(s): 0-3
  1528. 1528 Vulnerability Itlb multihit: Not affected
  1529. 1529 Vulnerability L1tf: Not affected
  1530. 1530 Vulnerability Mds: Not affected
  1531. 1531 Vulnerability Meltdown: Not affected
  1532. 1532 Vulnerability Mmio stale data: Not affected
  1533. 1533 Vulnerability Spec store bypass: Not affected
  1534. 1534 Vulnerability Spectre v1: Mitigation; __user pointer sanitization
  1535. 1535 Vulnerability Spectre v2: Not affected
  1536. 1536 Vulnerability Srbds: Not affected
  1537. 1537 Vulnerability Tsx async abort: Not affected
  1538. 1538
  1539. 1539 ### cpuinfo:
  1540. 1540
  1541. 1541 processor : 0
  1542. 1542 BogoMIPS : 48.00
  1543. 1543 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  1544. 1544 CPU implementer : 0x41
  1545. 1545 CPU architecture: 8
  1546. 1546 CPU variant : 0x0
  1547. 1547 CPU part : 0xd03
  1548. 1548 CPU revision : 4
  1549. 1549
  1550. 1550 processor : 1
  1551. 1551 BogoMIPS : 48.00
  1552. 1552 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  1553. 1553 CPU implementer : 0x41
  1554. 1554 CPU architecture: 8
  1555. 1555 CPU variant : 0x0
  1556. 1556 CPU part : 0xd03
  1557. 1557 CPU revision : 4
  1558. 1558
  1559. 1559 processor : 2
  1560. 1560 BogoMIPS : 48.00
  1561. 1561 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  1562. 1562 CPU implementer : 0x41
  1563. 1563 CPU architecture: 8
  1564. 1564 CPU variant : 0x0
  1565. 1565 CPU part : 0xd03
  1566. 1566 CPU revision : 4
  1567. 1567
  1568. 1568 processor : 3
  1569. 1569 BogoMIPS : 48.00
  1570. 1570 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  1571. 1571 CPU implementer : 0x41
  1572. 1572 CPU architecture: 8
  1573. 1573 CPU variant : 0x0
  1574. 1574 CPU part : 0xd03
  1575. 1575 CPU revision : 4
  1576. 1576
  1577. 1577
  1578. 1578 ### meminfo:
  1579. 1579
  1580. 1580 MemTotal: 2037300 kB
  1581. 1581 MemFree: 1854716 kB
  1582. 1582 MemAvailable: 1854296 kB
  1583. 1583 Buffers: 10092 kB
  1584. 1584 Cached: 49960 kB
  1585. 1585 SwapCached: 0 kB
  1586. 1586 Active: 25724 kB
  1587. 1587 Inactive: 55140 kB
  1588. 1588 Active(anon): 376 kB
  1589. 1589 Inactive(anon): 23872 kB
  1590. 1590 Active(file): 25348 kB
  1591. 1591 Inactive(file): 31268 kB
  1592. 1592 Unevictable: 0 kB
  1593. 1593 Mlocked: 0 kB
  1594. 1594 SwapTotal: 1018648 kB
  1595. 1595 SwapFree: 1018648 kB
  1596. 1596 Dirty: 1232 kB
  1597. 1597 Writeback: 0 kB
  1598. 1598 AnonPages: 21020 kB
  1599. 1599 Mapped: 17868 kB
  1600. 1600 Shmem: 3308 kB
  1601. 1601 KReclaimable: 9832 kB
  1602. 1602 Slab: 45448 kB
  1603. 1603 SReclaimable: 9832 kB
  1604. 1604 SUnreclaim: 35616 kB
  1605. 1605 KernelStack: 2576 kB
  1606. 1606 PageTables: 1812 kB
  1607. 1607 NFS_Unstable: 0 kB
  1608. 1608 Bounce: 0 kB
  1609. 1609 WritebackTmp: 0 kB
  1610. 1610 CommitLimit: 2037296 kB
  1611. 1611 Committed_AS: 43956 kB
  1612. 1612 VmallocTotal: 133143592960 kB
  1613. 1613 VmallocUsed: 23512 kB
  1614. 1614 VmallocChunk: 0 kB
  1615. 1615 Percpu: 1024 kB
  1616. 1616 AnonHugePages: 0 kB
  1617. 1617 ShmemHugePages: 0 kB
  1618. 1618 ShmemPmdMapped: 0 kB
  1619. 1619 FileHugePages: 0 kB
  1620. 1620 FilePmdMapped: 0 kB
  1621. 1621 CmaTotal: 131072 kB
  1622. 1622 CmaFree: 128768 kB
  1623. 1623 HugePages_Total: 0
  1624. 1624 HugePages_Free: 0
  1625. 1625 HugePages_Rsvd: 0
  1626. 1626 HugePages_Surp: 0
  1627. 1627 Hugepagesize: 2048 kB
  1628. 1628 Hugetlb: 0 kB
  1629. 1629
  1630. 1630 ### virtual memory:
  1631. 1631
  1632. 1632 vm.admin_reserve_kbytes = 8192
  1633. 1633 vm.compaction_proactiveness = 20
  1634. 1634 vm.compact_unevictable_allowed = 1
  1635. 1635 vm.dirty_background_bytes = 0
  1636. 1636 vm.dirty_background_ratio = 10
  1637. 1637 vm.dirty_bytes = 0
  1638. 1638 vm.dirty_expire_centisecs = 3000
  1639. 1639 vm.dirty_ratio = 20
  1640. 1640 vm.dirtytime_expire_seconds = 43200
  1641. 1641 vm.dirty_writeback_centisecs = 500
  1642. 1642 vm.extfrag_threshold = 500
  1643. 1643 vm.hugetlb_shm_group = 0
  1644. 1644 vm.laptop_mode = 0
  1645. 1645 vm.legacy_va_layout = 0
  1646. 1646 vm.lowmem_reserve_ratio = 256 256 32 0
  1647. 1647 vm.max_map_count = 65530
  1648. 1648 vm.min_free_kbytes = 22528
  1649. 1649 vm.min_slab_ratio = 5
  1650. 1650 vm.min_unmapped_ratio = 1
  1651. 1651 vm.mmap_min_addr = 32768
  1652. 1652 vm.mmap_rnd_bits = 18
  1653. 1653 vm.mmap_rnd_compat_bits = 11
  1654. 1654 vm.nr_hugepages = 0
  1655. 1655 vm.nr_hugepages_mempolicy = 0
  1656. 1656 vm.nr_overcommit_hugepages = 0
  1657. 1657 vm.numa_stat = 1
  1658. 1658 vm.numa_zonelist_order = Node
  1659. 1659 vm.oom_dump_tasks = 1
  1660. 1660 vm.oom_kill_allocating_task = 0
  1661. 1661 vm.overcommit_kbytes = 0
  1662. 1662 vm.overcommit_memory = 0
  1663. 1663 vm.overcommit_ratio = 50
  1664. 1664
  1665. 1665 ### [resize2fs] 4GiB or smaller media - leaving 5% spare area. Start resizing partition /dev/mmcblk0p1 now:
  1666. 1666
  1667. 1667 vm.page-cluster = 0
  1668. 1668 major minor #blocks name
  1669. 1669
  1670. 1670 179 0 1931264 mmcblk0
  1671. 1671 179 1 1814528 mmcblk0p1
  1672. 1672 179 32 7634944 mmcblk2
  1673. 1673 179 33 2045935 mmcblk2p1
  1674. 1674 179 34 16384 mmcblk2p2
  1675. 1675 179 35 16384 mmcblk2p3
  1676. 1676 179 36 32768 mmcblk2p4
  1677. 1677 179 37 2097152 mmcblk2p5
  1678. 1678 179 38 307200 mmcblk2p6
  1679. 1679 179 39 16384 mmcblk2p7
  1680. 1680 179 40 16384 mmcblk2p8
  1681. 1681 179 41 32768 mmcblk2p9
  1682. 1682 179 42 2097152 mmcblk2p10
  1683. 1683 179 43 16384 mmcblk2p11
  1684. 1684 179 44 65536 mmcblk2p12
  1685. 1685 179 45 2048 mmcblk2p13
  1686. 1686 179 46 32768 mmcblk2p14
  1687. 1687 179 47 16384 mmcblk2p15
  1688. 1688 179 48 786432 mmcblk2p16
  1689. 1689 252 0 1018652 zram0
  1690. 1690 252 1 51200 zram1
  1691. 1691
  1692. 1692 Executing fdisk, fsck and partprobe:
  1693. 1693 vm.page_lock_unfairness = 5
  1694. 1694 vm.panic_on_oom = 0
  1695. 1695 vm.percpu_pagelist_high_fraction = 0
  1696. 1696 vm.stat_interval = 1
  1697. 1697 vm.swappiness = 100
  1698. 1698 vm.user_reserve_kbytes = 63004
  1699. 1699 vm.vfs_cache_pressure = 100
  1700. 1700 vm.watermark_boost_factor = 15000
  1701. 1701 vm.watermark_scale_factor = 10
  1702. 1702
  1703. 1703 Welcome to fdisk (util-linux 2.37.2).
  1704. 1704 Changes will remain in memory only, until you decide to write them.
  1705. 1705 Be careful before using the write command.
  1706. 1706
  1707. 1707 This disk is currently in use - repartitioning is probably a bad idea.
  1708. 1708 It's recommended to umount all file systems, and swapoff all swap
  1709. 1709 partitions on this disk.
  1710. 1710
  1711. 1711
  1712. 1712 Command (m for help):
  1713. 1713 Selected partition 1
  1714. 1714 Partition 1 has been deleted.
  1715. 1715
  1716. 1716 Command (m for help): Partition type
  1717. 1717 p primary (0 primary, 0 extended, 4 free)
  1718. 1718 e extended (container for logical partitions)
  1719. 1719 Select (default p): Partition number (1-4, default 1): First sector (2048-3862527, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (8192-3862527, default 3862527): vm.zone_reclaim_mode = 0
  1720. 1720
  1721. 1721 ### ip addr:
  1722. 1722
  1723. 1723 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
  1724. 1724 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  1725. 1725 inet XXX.XXX.0.1/8 scope host lo
  1726. 1726 valid_lft forever preferred_lft forever
  1727. 1727 inet6 ::1/128 scope host
  1728. 1728 valid_lft forever preferred_lft forever
  1729. 1729 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
  1730. 1730 link/ether 02:07:98:a2:a6:2d brd ff:ff:ff:ff:ff:ff
  1731. 1731 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
  1732. 1732 link/ether a4:99:da:28:2f:13 brd ff:ff:ff:ff:ff:ff
  1733. 1733
  1734. 1734 ### partitions:
  1735. 1735
  1736. 1736 major minor #blocks name
  1737. 1737
  1738. 1738 179 0 1931264 mmcblk0
  1739. 1739 179 1 1814528 mmcblk0p1
  1740. 1740 179 32 7634944 mmcblk2
  1741. 1741 179 33 2045935 mmcblk2p1
  1742. 1742 179 34 16384 mmcblk2p2
  1743. 1743 179 35 16384 mmcblk2p3
  1744. 1744 179 36 32768 mmcblk2p4
  1745. 1745 179 37 2097152 mmcblk2p5
  1746. 1746 179 38 307200 mmcblk2p6
  1747. 1747 179 39 16384 mmcblk2p7
  1748. 1748 179 40 16384 mmcblk2p8
  1749. 1749 179 41 32768 mmcblk2p9
  1750. 1750 179 42 2097152 mmcblk2p10
  1751. 1751 179 43 16384 mmcblk2p11
  1752. 1752 179 44 65536 mmcblk2p12
  1753. 1753 179 45 2048 mmcblk2p13
  1754. 1754 179 46 32768 mmcblk2p14
  1755. 1755 179 47 16384 mmcblk2p15
  1756. 1756 179 48 786432 mmcblk2p16
  1757. 1757 252 0 1018652 zram0
  1758. 1758 252 1 51200 zram1
  1759. 1759
  1760. 1760 ### df:
  1761. 1761
  1762. 1762
  1763. 1763 Created a new partition 1 of type 'Linux' and of size 1.7 GiB.
  1764. 1764 Partition #1 contains a ext4 signature.
  1765. 1765
  1766. 1766 Command (m for help): tmpfs 199M 3.3M 196M 2% /run
  1767. 1767 /dev/mmcblk0p1 1.7G 1.4G 273M 84% /
  1768. 1768 tmpfs 995M 0 995M 0% /dev/shm
  1769. 1769 tmpfs 5.0M 4.0K 5.0M 1% /run/lock
  1770. 1770 tmpfs 995M 0 995M 0% /tmp
  1771. 1771 /dev/zram1 47M 1.2M 43M 3% /var/log
  1772. 1772
  1773. 1773 ### lsblk:
  1774. 1774
  1775. 1775 NAME FSTYPE SIZE MOUNTPOINT UUID
  1776. 1776 mmcblk0 1.8G
  1777. 1777 └─mmcblk0p1 ext4 1.7G / 81cc9469-982a-4232-8db4-540eebdd7c04
  1778. 1778 mmcblk2 7.3G
  1779. 1779 ├─mmcblk2p1 f2fs 2G 9b7ef4bd-c41f-449b-ab7e-62bbc5b8d119
  1780. 1780 ├─mmcblk2p2 vfat 16M
  1781. 1781 ├─mmcblk2p3 16M
  1782. 1782 ├─mmcblk2p4 32M
  1783. 1783 ├─mmcblk2p5 ext4 2G 2cba03d8-ce15-4509-9cbe-1b8e1cee2ed8
  1784. 1784 ├─mmcblk2p6 ext4 300M 99330148-936b-450c-ba42-a8138adb126c
  1785. 1785 ├─mmcblk2p7 16M
  1786. 1786 ├─mmcblk2p8 16M
  1787. 1787 ├─mmcblk2p9 32M
  1788. 1788 ├─mmcblk2p10 2G
  1789. 1789 ├─mmcblk2p11 16M
  1790. 1790 ├─mmcblk2p12 64M
  1791. 1791 ├─mmcblk2p13 2M
  1792. 1792 ├─mmcblk2p14 32M
  1793. 1793 ├─mmcblk2p15 16M
  1794. 1794 └─mmcblk2p16 ext4 768M 7d68b65b-c1e2-45a5-8c97-5afaa377ea42
  1795. 1795 mmcblk2boot0 4M
  1796. 1796 mmcblk2boot1 4M
  1797. 1797 zram1 50M /var/log
  1798. 1798 zram2 0B
  1799. 1799
  1800. 1800 ### zramctl:
  1801. 1801
  1802. 1802 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT
  1803. 1803 /dev/zram1 zstd 50M 1.2M 189.8K 560K 4 /var/log
  1804. 1804 /dev/zram0 lzo-rle 994.8M 4K 74B 12K 4 [SWAP]
  1805. 1805
  1806. 1806 ### mtab:
  1807. 1807
  1808. 1808 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0
  1809. 1809 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0
  1810. 1810 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0
  1811. 1811
  1812. 1812 The partition table has been altered.
  1813. 1813 Syncing disks.
  1814. 1814
  1815. 1815 New partition table:
  1816. 1816
  1817. 1817 major minor #blocks name
  1818. 1818
  1819. 1819 179 0 1931264 mmcblk0
  1820. 1820 179 1 1814528 mmcblk0p1
  1821. 1821 179 32 7634944 mmcblk2
  1822. 1822 179 33 2045935 mmcblk2p1
  1823. 1823 179 34 16384 mmcblk2p2
  1824. 1824 179 35 16384 mmcblk2p3
  1825. 1825 179 36 32768 mmcblk2p4
  1826. 1826 179 37 2097152 mmcblk2p5
  1827. 1827 179 38 307200 mmcblk2p6
  1828. 1828 179 39 16384 mmcblk2p7
  1829. 1829 179 40 16384 mmcblk2p8
  1830. 1830 179 41 32768 mmcblk2p9
  1831. 1831 179 42 2097152 mmcblk2p10
  1832. 1832 179 43 16384 mmcblk2p11
  1833. 1833 179 44 65536 mmcblk2p12
  1834. 1834 179 45 2048 mmcblk2p13
  1835. 1835 179 46 32768 mmcblk2p14
  1836. 1836 179 47 16384 mmcblk2p15
  1837. 1837 179 48 786432 mmcblk2p16
  1838. 1838 252 0 1018652 zram0
  1839. 1839 252 1 51200 zram1
  1840. 1840
  1841. 1841 Now trying to resize ext4 filesystem on /dev/mmcblk0p1 to the limits:
  1842. 1842
  1843. 1843 resize2fs 1.46.5 (30-Dec-2021)
  1844. 1844 The filesystem is already 453632 (4k) blocks long. Nothing to do!
  1845. 1845
  1846. 1846
  1847. 1847 ### [resize2fs] Automated reboot needed to finish the resize procedure
  1848. 1848
  1849. 1849 ### mmc0:e624 info:
  1850. 1850
  1851. 1851 fwrev: 0x0
  1852. 1852 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SU02G MODALIAS=mmc:block
  1853. 1853 cid: 0353445355303247801896a64a00284b
  1854. 1854 rca: 0xe624
  1855. 1855 csd: 002600325f5a83aefefbcfff928040df
  1856. 1856 manfid: 0x000003
  1857. 1857 ocr: 0x00200000
  1858. 1858 preferred_erase_size: 4194304
  1859. 1859 type: SD
  1860. 1860 hwrev: 0x8
  1861. 1861 date: 08/2002
  1862. 1862 dsr: 0x404
  1863. 1863 erase_size: 512
  1864. 1864 oemid: 0x5344
  1865. 1865 serial: 0x1896a64a
  1866. 1866 ssr: 0000000000000028000090000b050900000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
  1867. 1867 scr: 0225800000000000
  1868. 1868 name: SU02G
  1869. 1869
  1870. 1870 ### mmc2:0001 info:
  1871. 1871
  1872. 1872 fwrev: 0x0600000000000000
  1873. 1873 uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=8GTF4R MODALIAS=mmc:block
  1874. 1874 cid: 150100384754463452067d918f05780b
  1875. 1875 rel_sectors: 0x1
  1876. 1876 enhanced_rpmb_supported: 0x1
  1877. 1877 rca: 0x0001
  1878. 1878 pre_eol_info: 0x01
  1879. 1879 csd: d02701320f5903fff6dbffef8e40400d
  1880. 1880 manfid: 0x000015
  1881. 1881 ocr: 0x00200000
  1882. 1882 preferred_erase_size: 4194304
  1883. 1883 enhanced_area_offset: 18446744073709551594
  1884. 1884 raw_rpmb_size_mult: 0x4
  1885. 1885 type: MMC
  1886. 1886 hwrev: 0x0
  1887. 1887 date: 07/2021
  1888. 1888 prv: 0x6
  1889. 1889 ffu_capable: 1
  1890. 1890 dsr: 0x404
  1891. 1891 erase_size: 524288
  1892. 1892 life_time: 0x01 0x01
  1893. 1893 enhanced_area_size: 4294967274
  1894. 1894 oemid: 0x0100
  1895. 1895 serial: 0x7d918f05
  1896. 1896 cmdq_en: 0
  1897. 1897 rev: 0x8
  1898. 1898 name: 8GTF4R
  1899. 1899
  1900. 1900 ### Boot system health:
  1901. 1901
  1902. 1902 Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St.
  1903. 1903 01:14:01: 1320MHz 0.23 46% 20% 13% 0% 12% 0% 58.5°C 0/9
  1904. 1904 01:14:01: 1080MHz 0.23 9% 6% 2% 1% 0% 0% 56.0°C 0/9
  1905. 1905 01:14:02: 1320MHz 0.23 11% 6% 3% 1% 0% 0% 53.6°C 0/9
  1906. 1906 01:14:02: 888MHz 0.23 9% 5% 2% 0% 0% 0% 53.6°C 0/9
  1907. 1907 01:14:02: 816MHz 0.23 11% 8% 2% 0% 0% 0% 53.0°C 0/9
  1908. 1908
  1909. 1909 ### Activated 1 lzo-rle zram swap devices with 994MB each.
  1910. 1910 ### Activated Armbian ramlog partition with zstd compression
  1911. 1911
  1912. 1912 ### Activated 1 lzo-rle zram swap devices with 994MB each.
  1913. 1913 ### Activated Armbian ramlog partition with zstd compression
  1914. 1914
  1915. 1915 ### Activated 1 lzo-rle zram swap devices with 994MB each.
  1916. 1916 ### Activated Armbian ramlog partition with zstd compression
  1917. 1917
  1918. 1918 Wed Jun 29 01:25:41 AM UTC 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64
  1919. 1919
  1920. 1920 ### dmesg:
  1921. 1921
  1922. 1922 [ 1.156785] NetLabel: Initializing
  1923. 1923 [ 1.156791] NetLabel: domain hash size = 128
  1924. 1924 [ 1.156796] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  1925. 1925 [ 1.156865] NetLabel: unlabeled traffic allowed by default
  1926. 1926 [ 1.157300] clocksource: Switched to clocksource arch_sys_counter
  1927. 1927 [ 1.157551] VFS: Disk quotas dquot_6.6.0
  1928. 1928 [ 1.157611] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  1929. 1929 [ 1.158200] AppArmor: AppArmor Filesystem Enabled
  1930. 1930 [ 1.164869] NET: Registered PF_INET protocol family
  1931. 1931 [ 1.165083] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
  1932. 1932 [ 1.166366] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
  1933. 1933 [ 1.166407] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  1934. 1934 [ 1.166423] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
  1935. 1935 [ 1.166570] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
  1936. 1936 [ 1.166859] TCP: Hash tables configured (established 16384 bind 16384)
  1937. 1937 [ 1.166979] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  1938. 1938 [ 1.167039] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  1939. 1939 [ 1.167238] NET: Registered PF_UNIX/PF_LOCAL protocol family
  1940. 1940 [ 1.167768] Trying to unpack rootfs image as initramfs...
  1941. 1941 [ 1.174365] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  1942. 1942 [ 1.180846] Initialise system trusted keyrings
  1943. 1943 [ 1.180918] Key type blacklist registered
  1944. 1944 [ 1.181110] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  1945. 1945 [ 1.187037] zbud: loaded
  1946. 1946 [ 1.188605] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  1947. 1947 [ 1.190926] integrity: Platform Keyring initialized
  1948. 1948 [ 1.239081] xor: automatically using best checksumming function 32regs
  1949. 1949 [ 1.239111] async_tx: api initialized (async)
  1950. 1950 [ 1.239124] Key type asymmetric registered
  1951. 1951 [ 1.239130] Asymmetric key parser 'x509' registered
  1952. 1952 [ 1.239263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  1953. 1953 [ 1.239432] io scheduler mq-deadline registered
  1954. 1954 [ 1.239440] io scheduler kyber registered
  1955. 1955 [ 1.239630] io scheduler bfq registered
  1956. 1956 [ 1.244705] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
  1957. 1957 [ 1.256210] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
  1958. 1958 [ 1.262989] cacheinfo: Unable to detect cache hierarchy for CPU 0
  1959. 1959 [ 1.267099] loop: module loaded
  1960. 1960 [ 1.269557] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1961. 1961 [ 1.269587] ehci-platform: EHCI generic platform driver
  1962. 1962 [ 1.269751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  1963. 1963 [ 1.269765] ohci-platform: OHCI generic platform driver
  1964. 1964 [ 1.270259] usbcore: registered new interface driver usb-storage
  1965. 1965 [ 1.270770] mousedev: PS/2 mouse device common for all mice
  1966. 1966 [ 1.271736] sun6i-rtc 7000000.rtc: registered as rtc0
  1967. 1967 [ 1.271771] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4)
  1968. 1968 [ 1.271886] sun6i-rtc 7000000.rtc: RTC enabled
  1969. 1969 [ 1.272026] i2c_dev: i2c /dev entries driver
  1970. 1970 [ 1.272800] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  1971. 1971 [ 1.274388] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pm not found, using dummy regulator
  1972. 1972 [ 1.274827] sdhci: Secure Digital Host Controller Interface driver
  1973. 1973 [ 1.274835] sdhci: Copyright(c) Pierre Ossman
  1974. 1974 [ 1.274859] Synopsys Designware Multimedia Card Interface Driver
  1975. 1975 [ 1.275655] sdhci-pltfm: SDHCI platform and OF driver helper
  1976. 1976 [ 1.275816] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator
  1977. 1977 [ 1.277113] ledtrig-cpu: registered to indicate activity on CPUs
  1978. 1978 [ 1.277714] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz)
  1979. 1979 [ 1.278026] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  1980. 1980 [ 1.278152] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  1981. 1981 [ 1.278251] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  1982. 1982 [ 1.278367] sun8i-ce 1904000.crypto: will run requests pump with realtime priority
  1983. 1983 [ 1.278457] sun8i-ce 1904000.crypto: Register cbc(aes)
  1984. 1984 [ 1.278609] sun8i-ce 1904000.crypto: Register ecb(aes)
  1985. 1985 [ 1.278725] sun8i-ce 1904000.crypto: Register cbc(des3_ede)
  1986. 1986 [ 1.278838] sun8i-ce 1904000.crypto: Register ecb(des3_ede)
  1987. 1987 [ 1.278955] sun8i-ce 1904000.crypto: Register md5
  1988. 1988 [ 1.279067] sun8i-ce 1904000.crypto: Register sha1
  1989. 1989 [ 1.279178] sun8i-ce 1904000.crypto: Register sha224
  1990. 1990 [ 1.279290] sun8i-ce 1904000.crypto: Register sha256
  1991. 1991 [ 1.279401] sun8i-ce 1904000.crypto: Register sha384
  1992. 1992 [ 1.279512] sun8i-ce 1904000.crypto: Register sha512
  1993. 1993 [ 1.279624] sun8i-ce 1904000.crypto: Register stdrng
  1994. 1994 [ 1.280360] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0
  1995. 1995 [ 1.280937] hid: raw HID events driver (C) Jiri Kosina
  1996. 1996 [ 1.281077] usbcore: registered new interface driver usbhid
  1997. 1997 [ 1.281085] usbhid: USB HID core driver
  1998. 1998 [ 1.281877] random: crng init done
  1999. 1999 [ 1.284060] NET: Registered PF_INET6 protocol family
  2000. 2000 [ 1.870883] Freeing initrd memory: 12684K
  2001. 2001 [ 1.899873] Segment Routing with IPv6
  2002. 2002 [ 1.899938] In-situ OAM (IOAM) with IPv6
  2003. 2003 [ 1.900024] NET: Registered PF_PACKET protocol family
  2004. 2004 [ 1.900141] 8021q: 802.1Q VLAN Support v1.8
  2005. 2005 [ 1.900298] 9pnet: Installing 9P2000 support
  2006. 2006 [ 1.900378] Key type dns_resolver registered
  2007. 2007 [ 1.900839] registered taskstats version 1
  2008. 2008 [ 1.900856] Loading compiled-in X.509 certificates
  2009. 2009 [ 1.904720] Loaded X.509 cert 'Build time autogenerated kernel key: 32330adefd2da02e444296fafd37464380789679'
  2010. 2010 [ 1.907598] zswap: loaded using pool zstd/z3fold
  2011. 2011 [ 1.908226] Key type ._fscrypt registered
  2012. 2012 [ 1.908233] Key type .fscrypt registered
  2013. 2013 [ 1.908238] Key type fscrypt-provisioning registered
  2014. 2014 [ 1.909254] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no
  2015. 2015 [ 1.923102] Key type encrypted registered
  2016. 2016 [ 1.923134] AppArmor: AppArmor sha1 policy hashing enabled
  2017. 2017 [ 1.923172] ima: No TPM chip found, activating TPM-bypass!
  2018. 2018 [ 1.923202] ima: Allocated hash algorithm: sha1
  2019. 2019 [ 1.923234] ima: No architecture policies found
  2020. 2020 [ 1.923308] evm: Initialising EVM extended attributes:
  2021. 2021 [ 1.923313] evm: security.selinux
  2022. 2022 [ 1.923318] evm: security.SMACK64
  2023. 2023 [ 1.923322] evm: security.SMACK64EXEC
  2024. 2024 [ 1.923326] evm: security.SMACK64TRANSMUTE
  2025. 2025 [ 1.923330] evm: security.SMACK64MMAP
  2026. 2026 [ 1.923334] evm: security.apparmor
  2027. 2027 [ 1.923338] evm: security.ima
  2028. 2028 [ 1.923342] evm: security.capability
  2029. 2029 [ 1.923346] evm: HMAC attrs: 0x1
  2030. 2030 [ 1.936339] platform 1100000.mixer: Fixing up cyclic dependency with 6510000.tcon-top
  2031. 2031 [ 1.936688] sun8i-mixer 1100000.mixer: Adding to iommu group 0
  2032. 2032 [ 1.938783] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  2033. 2033 [ 1.938815] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
  2034. 2034 [ 1.938964] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010
  2035. 2035 [ 1.939025] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x05200000
  2036. 2036 [ 1.939500] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
  2037. 2037 [ 1.939516] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2038. 2038 [ 1.939526] usb usb1: Product: xHCI Host Controller
  2039. 2039 [ 1.939535] usb usb1: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd
  2040. 2040 [ 1.939544] usb usb1: SerialNumber: xhci-hcd.1.auto
  2041. 2041 [ 1.940099] hub 1-0:1.0: USB hub found
  2042. 2042 [ 1.940146] hub 1-0:1.0: 1 port detected
  2043. 2043 [ 1.940465] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  2044. 2044 [ 1.940484] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
  2045. 2045 [ 1.940504] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  2046. 2046 [ 1.940594] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  2047. 2047 [ 1.940750] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15
  2048. 2048 [ 1.940763] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2049. 2049 [ 1.940773] usb usb2: Product: xHCI Host Controller
  2050. 2050 [ 1.940781] usb usb2: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd
  2051. 2051 [ 1.940790] usb usb2: SerialNumber: xhci-hcd.1.auto
  2052. 2052 [ 1.941192] hub 2-0:1.0: USB hub found
  2053. 2053 [ 1.941229] hub 2-0:1.0: 1 port detected
  2054. 2054 [ 1.943871] sun50i_cpufreq_nvmem: Using CPU speed bin speed0
  2055. 2055 [ 1.945721] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version
  2056. 2056 [ 1.952059] of_cfs_init
  2057. 2057 [ 1.952174] of_cfs_init: OK
  2058. 2058 [ 1.952508] ALSA device list:
  2059. 2059 [ 1.952514] No soundcards found.
  2060. 2060 [ 1.953661] Freeing unused kernel memory: 2496K
  2061. 2061 [ 1.969383] Run /init as init process
  2062. 2062 [ 1.969390] with arguments:
  2063. 2063 [ 1.969396] /init
  2064. 2064 [ 1.969402] with environment:
  2065. 2065 [ 1.969406] HOME=/
  2066. 2066 [ 1.969411] TERM=linux
  2067. 2067 [ 1.969416] ubootpart=deddb4e0-01
  2068. 2068 [ 1.969421] cgroup_enable=memory
  2069. 2069 [ 2.391162] axp20x-i2c 0-0036: AXP20x variant AXP806 found
  2070. 2070 [ 2.404237] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input0
  2071. 2071 [ 2.411657] vdd-cpu: supplied by vcc-5v
  2072. 2072 [ 2.413376] vdd-gpu: supplied by vcc-5v
  2073. 2073 [ 2.414094] vdd-sys: Bringing 900000uV into 960000-960000uV
  2074. 2074 [ 2.414497] vdd-sys: supplied by vcc-5v
  2075. 2075 [ 2.415472] vcc-dram: supplied by vcc-5v
  2076. 2076 [ 2.416443] vcc-pl-led-ir: supplied by vcc-5v
  2077. 2077 [ 2.417262] vcc33-audio-tv-ephy-mac: Bringing 700000uV into 3300000-3300000uV
  2078. 2078 [ 2.417783] vcc33-audio-tv-ephy-mac: supplied by vcc-5v
  2079. 2079 [ 2.530077] vcc33-io-pd-emmc-sd-usb-uart-1: Bringing 700000uV into 3300000-3300000uV
  2080. 2080 [ 2.530437] vcc33-io-pd-emmc-sd-usb-uart-1: supplied by vcc-5v
  2081. 2081 [ 2.531441] vcc18-dram-bias-pll: supplied by vcc-5v
  2082. 2082 [ 2.532508] vcc-efuse-pcie-hdmi-pc: supplied by vcc-5v
  2083. 2083 [ 2.533172] vcc-wifi-io-pm-pg: Bringing 700000uV into 1800000-1800000uV
  2084. 2084 [ 2.533508] vcc-wifi-io-pm-pg: supplied by vcc-5v
  2085. 2085 [ 2.534597] bldo4: supplied by vcc-5v
  2086. 2086 [ 2.535113] vcc33-io-pd-emmc-sd-usb-uart-2: supplied by vcc-5v
  2087. 2087 [ 2.535910] cldo2: supplied by vcc-5v
  2088. 2088 [ 2.536560] cldo3: supplied by vcc-5v
  2089. 2089 [ 2.536817] sw: supplied by regulator-dummy
  2090. 2090 [ 2.537374] axp20x-i2c 0-0036: AXP20X driver loaded
  2091. 2091 [ 2.543980] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
  2092. 2092 [ 2.544498] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pb not found, using dummy regulator
  2093. 2093 [ 2.545432] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator
  2094. 2094 [ 2.548640] printk: console [ttyS0] disabled
  2095. 2095 [ 2.548753] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 35, base_baud = 1500000) is a 16550A
  2096. 2096 [ 2.548970] printk: console [ttyS0] enabled
  2097. 2097 [ 2.551549] sun4i-drm display-engine: Adding to iommu group 0
  2098. 2098 [ 2.571201] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e16990)
  2099. 2099 [ 2.571520] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e1abb8)
  2100. 2100 [ 2.571870] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e11ba0)
  2101. 2101 [ 2.571967] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator
  2102. 2102 [ 2.572488] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
  2103. 2103 [ 2.572829] sun8i-dw-hdmi 6000000.hdmi: EVENT=plugin
  2104. 2104 [ 2.573158] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
  2105. 2105 [ 2.573686] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e15cc8)
  2106. 2106 [ 2.575311] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
  2107. 2107 [ 2.575373] sun8i-dw-hdmi 6000000.hdmi: read_hpd result: 1
  2108. 2108 [ 2.730195] Console: switching to colour frame buffer device 240x67
  2109. 2109 [ 2.780023] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device
  2110. 2110 [ 2.801043] acx00-codec acx00-codec: DMA mask not set
  2111. 2111 [ 2.803816] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
  2112. 2112 [ 2.807796] sunxi-mmc 4020000.mmc: Got CD GPIO
  2113. 2113 [ 2.808756] vcc-wifi-io: supplied by vcc33-wifi
  2114. 2114 [ 2.811787] ehci-platform 5101000.usb: EHCI Host Controller
  2115. 2115 [ 2.811832] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 3
  2116. 2116 [ 2.811984] ehci-platform 5101000.usb: irq 41, io mem 0x05101000
  2117. 2117 [ 2.825325] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
  2118. 2118 [ 2.825657] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
  2119. 2119 [ 2.825673] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2120. 2120 [ 2.825683] usb usb3: Product: EHCI Host Controller
  2121. 2121 [ 2.825691] usb usb3: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd
  2122. 2122 [ 2.825700] usb usb3: SerialNumber: 5101000.usb
  2123. 2123 [ 2.826284] hub 3-0:1.0: USB hub found
  2124. 2124 [ 2.826327] hub 3-0:1.0: 1 port detected
  2125. 2125 [ 2.827539] ehci-platform 5311000.usb: EHCI Host Controller
  2126. 2126 [ 2.827582] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 4
  2127. 2127 [ 2.827725] ehci-platform 5311000.usb: irq 44, io mem 0x05311000
  2128. 2128 [ 2.829395] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
  2129. 2129 [ 2.833140] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  2130. 2130 [ 2.841314] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00
  2131. 2131 [ 2.841652] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
  2132. 2132 [ 2.841668] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2133. 2133 [ 2.841678] usb usb4: Product: EHCI Host Controller
  2134. 2134 [ 2.841687] usb usb4: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd
  2135. 2135 [ 2.841695] usb usb4: SerialNumber: 5311000.usb
  2136. 2136 [ 2.842261] hub 4-0:1.0: USB hub found
  2137. 2137 [ 2.842321] hub 4-0:1.0: 1 port detected
  2138. 2138 [ 2.843404] ohci-platform 5101400.usb: Generic Platform OHCI controller
  2139. 2139 [ 2.843449] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 5
  2140. 2140 [ 2.843586] ohci-platform 5101400.usb: irq 42, io mem 0x05101400
  2141. 2141 [ 2.884568] mmc0: host does not support reading read-only switch, assuming write-enable
  2142. 2142 [ 2.888468] mmc0: new high speed SD card at address e624
  2143. 2143 [ 2.889388] mmcblk0: mmc0:e624 SU02G 1.84 GiB
  2144. 2144 [ 2.891684] mmcblk0: p1
  2145. 2145 [ 2.905563] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
  2146. 2146 [ 2.905589] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2147. 2147 [ 2.905599] usb usb5: Product: Generic Platform OHCI controller
  2148. 2148 [ 2.905608] usb usb5: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd
  2149. 2149 [ 2.905616] usb usb5: SerialNumber: 5101400.usb
  2150. 2150 [ 2.906237] hub 5-0:1.0: USB hub found
  2151. 2151 [ 2.906294] hub 5-0:1.0: 1 port detected
  2152. 2152 [ 2.907510] ohci-platform 5311400.usb: Generic Platform OHCI controller
  2153. 2153 [ 2.907554] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6
  2154. 2154 [ 2.907708] ohci-platform 5311400.usb: irq 45, io mem 0x05311400
  2155. 2155 [ 2.969446] mmc2: new HS200 MMC card at address 0001
  2156. 2156 [ 2.969635] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15
  2157. 2157 [ 2.969653] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2158. 2158 [ 2.969664] usb usb6: Product: Generic Platform OHCI controller
  2159. 2159 [ 2.969673] usb usb6: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd
  2160. 2160 [ 2.969681] usb usb6: SerialNumber: 5311400.usb
  2161. 2161 [ 2.970457] hub 6-0:1.0: USB hub found
  2162. 2162 [ 2.970533] hub 6-0:1.0: 1 port detected
  2163. 2163 [ 2.970566] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB
  2164. 2164 [ 2.972701] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator
  2165. 2165 [ 2.973145] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests
  2166. 2166 [ 2.976416] Alternate GPT is invalid, using primary GPT.
  2167. 2167 [ 2.976501] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16
  2168. 2168 [ 2.979379] mmcblk2boot0: mmc2:0001 8GTF4R 4.00 MiB
  2169. 2169 [ 2.981419] mmcblk2boot1: mmc2:0001 8GTF4R 4.00 MiB
  2170. 2170 [ 3.077750] musb-hdrc musb-hdrc.5.auto: MUSB HDRC host driver
  2171. 2171 [ 3.077795] musb-hdrc musb-hdrc.5.auto: new USB bus registered, assigned bus number 7
  2172. 2172 [ 3.078153] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15
  2173. 2173 [ 3.078178] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  2174. 2174 [ 3.078190] usb usb7: Product: MUSB HDRC host driver
  2175. 2175 [ 3.078198] usb usb7: Manufacturer: Linux 5.15.48-sunxi64 musb-hcd
  2176. 2176 [ 3.078207] usb usb7: SerialNumber: musb-hdrc.5.auto
  2177. 2177 [ 3.078922] hub 7-0:1.0: USB hub found
  2178. 2178 [ 3.079004] hub 7-0:1.0: 1 port detected
  2179. 2179 [ 3.094852] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found
  2180. 2180 [ 3.094879] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found
  2181. 2181 [ 3.095188] dwmac-sun8i 5020000.ethernet: supply phy-io not found, using dummy regulator
  2182. 2182 [ 3.095484] dwmac-sun8i 5020000.ethernet: PTP uses main clock
  2183. 2183 [ 3.095543] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000)
  2184. 2184 [ 3.205586] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported
  2185. 2185 [ 3.205612] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported
  2186. 2186 [ 3.205620] dwmac-sun8i 5020000.ethernet: COE Type 2
  2187. 2187 [ 3.205630] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported
  2188. 2188 [ 3.205638] dwmac-sun8i 5020000.ethernet: Normal descriptors
  2189. 2189 [ 3.205645] dwmac-sun8i 5020000.ethernet: Chain mode enabled
  2190. 2190 [ 3.573308] usb 5-1: new low-speed USB device number 2 using ohci-platform
  2191. 2191 [ 3.802346] usb 5-1: New USB device found, idVendor=04f3, idProduct=0103, bcdDevice= 1.07
  2192. 2192 [ 3.802364] usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  2193. 2193 [ 3.802375] usb 5-1: Product: USB Keyboard
  2194. 2194 [ 3.812577] input: USB Keyboard as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.0/0003:04F3:0103.0001/input/input1
  2195. 2195 [ 3.813434] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.11 Keyboard [USB Keyboard] on usb-5101400.usb-1/input0
  2196. 2196 [ 3.823927] input: USB Keyboard Consumer Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:04F3:0103.0002/input/input2
  2197. 2197 [ 3.824238] input: USB Keyboard System Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:04F3:0103.0002/input/input3
  2198. 2198 [ 3.824496] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.11 Device [USB Keyboard] on usb-5101400.usb-1/input1
  2199. 2199 [ 4.278860] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq
  2200. 2200 [ 4.509876] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  2201. 2201 [ 4.527265] mmc1: new high speed SDIO card at address 8800
  2202. 2202 [ 4.933984] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none.
  2203. 2203 [ 5.812904] systemd[1]: System time before build time, advancing clock.
  2204. 2204 [ 5.860306] systemd[1]: systemd 249.11-0ubuntu3.1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
  2205. 2205 [ 5.860971] systemd[1]: Detected architecture arm64.
  2206. 2206 [ 5.864198] systemd[1]: Hostname set to <orangepi3-lts>.
  2207. 2207 [ 6.922438] systemd[1]: Queued start job for default target Graphical Interface.
  2208. 2208 [ 6.927918] systemd[1]: Created slice Slice /system/modprobe.
  2209. 2209 [ 6.930572] systemd[1]: Created slice Slice /system/serial-getty.
  2210. 2210 [ 6.932437] systemd[1]: Created slice User and Session Slice.
  2211. 2211 [ 6.933271] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active.
  2212. 2212 [ 6.934092] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  2213. 2213 [ 6.935328] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  2214. 2214 [ 6.935935] systemd[1]: Reached target Local Encrypted Volumes.
  2215. 2215 [ 6.936600] systemd[1]: Reached target Slice Units.
  2216. 2216 [ 6.936949] systemd[1]: Reached target Swaps.
  2217. 2217 [ 6.937263] systemd[1]: Reached target System Time Set.
  2218. 2218 [ 6.937808] systemd[1]: Reached target Local Verity Protected Volumes.
  2219. 2219 [ 6.956406] systemd[1]: Listening on RPCbind Server Activation Socket.
  2220. 2220 [ 6.957812] systemd[1]: Listening on Syslog Socket.
  2221. 2221 [ 6.958777] systemd[1]: Listening on fsck to fsckd communication Socket.
  2222. 2222 [ 6.959423] systemd[1]: Listening on initctl Compatibility Named Pipe.
  2223. 2223 [ 6.960838] systemd[1]: Listening on Journal Audit Socket.
  2224. 2224 [ 6.961882] systemd[1]: Listening on Journal Socket (/dev/log).
  2225. 2225 [ 6.962949] systemd[1]: Listening on Journal Socket.
  2226. 2226 [ 6.964134] systemd[1]: Listening on udev Control Socket.
  2227. 2227 [ 6.965040] systemd[1]: Listening on udev Kernel Socket.
  2228. 2228 [ 6.965462] systemd[1]: Reached target Socket Units.
  2229. 2229 [ 6.969811] systemd[1]: Mounting Huge Pages File System...
  2230. 2230 [ 6.974863] systemd[1]: Mounting POSIX Message Queue File System...
  2231. 2231 [ 6.979912] systemd[1]: Mounting NFSD configuration filesystem...
  2232. 2232 [ 6.985745] systemd[1]: Mounting Kernel Debug File System...
  2233. 2233 [ 6.986907] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  2234. 2234 [ 6.987743] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
  2235. 2235 [ 6.995124] systemd[1]: Starting Restore / save the current clock...
  2236. 2236 [ 7.006805] systemd[1]: Starting Set the console keyboard layout...
  2237. 2237 [ 7.012706] systemd[1]: Starting Create List of Static Device Nodes...
  2238. 2238 [ 7.019639] systemd[1]: Starting Load Kernel Module configfs...
  2239. 2239 [ 7.026364] systemd[1]: Starting Load Kernel Module drm...
  2240. 2240 [ 7.033487] systemd[1]: Starting Load Kernel Module fuse...
  2241. 2241 [ 7.040123] systemd[1]: Started Nameserver information manager.
  2242. 2242 [ 7.041687] systemd[1]: Reached target Preparation for Network.
  2243. 2243 [ 7.042889] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
  2244. 2244 [ 7.071814] systemd[1]: Starting Load Kernel Modules...
  2245. 2245 [ 7.078327] systemd[1]: Starting Remount Root and Kernel File Systems...
  2246. 2246 [ 7.083948] systemd[1]: Starting Coldplug All udev Devices...
  2247. 2247 [ 7.097123] fuse: init (API version 7.34)
  2248. 2248 [ 7.098765] systemd[1]: Mounted Huge Pages File System.
  2249. 2249 [ 7.100619] systemd[1]: Mounted POSIX Message Queue File System.
  2250. 2250 [ 7.102077] systemd[1]: Mounted Kernel Debug File System.
  2251. 2251 [ 7.104394] systemd[1]: Finished Restore / save the current clock.
  2252. 2252 [ 7.107552] systemd[1]: Finished Create List of Static Device Nodes.
  2253. 2253 [ 7.109881] systemd[1]: [email protected]: Deactivated successfully.
  2254. 2254 [ 7.111117] systemd[1]: Finished Load Kernel Module configfs.
  2255. 2255 [ 7.113244] systemd[1]: [email protected]: Deactivated successfully.
  2256. 2256 [ 7.114739] systemd[1]: Finished Load Kernel Module drm.
  2257. 2257 [ 7.117008] systemd[1]: [email protected]: Deactivated successfully.
  2258. 2258 [ 7.118345] systemd[1]: Finished Load Kernel Module fuse.
  2259. 2259 [ 7.127055] systemd[1]: Mounting FUSE Control File System...
  2260. 2260 [ 7.132706] systemd[1]: Mounting Kernel Configuration File System...
  2261. 2261 [ 7.140186] systemd[1]: Mounted FUSE Control File System.
  2262. 2262 [ 7.146383] systemd[1]: Mounted Kernel Configuration File System.
  2263. 2263 [ 7.149726] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none.
  2264. 2264 [ 7.154089] RPC: Registered named UNIX socket transport module.
  2265. 2265 [ 7.154111] RPC: Registered udp transport module.
  2266. 2266 [ 7.154116] RPC: Registered tcp transport module.
  2267. 2267 [ 7.154120] RPC: Registered tcp NFSv4.1 backchannel transport module.
  2268. 2268 [ 7.155518] systemd[1]: Finished Remount Root and Kernel File Systems.
  2269. 2269 [ 7.163200] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  2270. 2270 [ 7.168064] systemd[1]: Starting Load/Save Random Seed...
  2271. 2271 [ 7.180308] systemd[1]: Starting Create System Users...
  2272. 2272 [ 7.343037] WCN: marlin_init entry!
  2273. 2273 [ 7.343605] WCN: wcn config bt wake host
  2274. 2274 [ 7.343839] WCN_ERR: dts node for bt_wake not found
  2275. 2275 [ 7.343842] WCN: marlin2 parse_dt some para not config
  2276. 2276 [ 7.343854] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840
  2277. 2277 [ 7.348615] sdiohal:sdiohal_init ok
  2278. 2278 [ 7.349461] WCN: marlin_probe ok!
  2279. 2279 [ 7.375668] Installing knfsd (copyright (C) 1996 [email protected]).
  2280. 2280 [ 7.384430] systemd[1]: Mounted NFSD configuration filesystem.
  2281. 2281 [ 7.393715] systemd[1]: Finished Create System Users.
  2282. 2282 [ 7.405810] systemd[1]: Starting Create Static Device Nodes in /dev...
  2283. 2283 [ 7.472662] systemd[1]: Finished Set the console keyboard layout.
  2284. 2284 [ 7.582013] mtty_probe init device addr: 0x0000000058b01477
  2285. 2285 [ 7.582226] -->rfkill_bluetooth_init
  2286. 2286 [ 7.582375] bluetooth_set_power: start_block=1
  2287. 2287 [ 7.582386] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0
  2288. 2288 [ 7.582396] bluetooth_set_power: end_block=1
  2289. 2289 [ 7.582412] <--rfkill_bluetooth_init
  2290. 2290 [ 7.596105] systemd[1]: Finished Load/Save Random Seed.
  2291. 2291 [ 7.603752] systemd[1]: Condition check resulted in First Boot Complete being skipped.
  2292. 2292 [ 7.639537] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  2293. 2293 [ 7.641113] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  2294. 2294 [ 7.655425] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9
  2295. 2295 [ 7.655536] [ADDR_MGT] addr_mgt_probe: success.
  2296. 2296 [ 7.704767] WCN: start_marlin [MARLIN_WIFI]
  2297. 2297 [ 7.704794] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1
  2298. 2298 [ 7.704803] WCN: the first power on start
  2299. 2299 [ 7.704890] systemd[1]: Finished Create Static Device Nodes in /dev.
  2300. 2300 [ 7.712301] systemd[1]: Reached target Preparation for Local File Systems.
  2301. 2301 [ 7.724730] systemd[1]: Mounting /tmp...
  2302. 2302 [ 7.738778] systemd[1]: Starting Rule-based Manager for Device Events and Files...
  2303. 2303 [ 7.747988] systemd[1]: Finished Coldplug All udev Devices.
  2304. 2304 [ 7.758554] systemd[1]: Mounted /tmp.
  2305. 2305 [ 7.765896] systemd[1]: Reached target Local File Systems.
  2306. 2306 [ 7.778086] systemd[1]: Starting Armbian leds state...
  2307. 2307 [ 7.790593] systemd[1]: Starting Armbian ZRAM config...
  2308. 2308 [ 7.802931] systemd[1]: Starting Set console font and keymap...
  2309. 2309 [ 7.809396] WCN: marlin chip en dummy pull up -- need manually set GPIO
  2310. 2310 [ 7.821194] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
  2311. 2311 [ 7.828441] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped.
  2312. 2312 [ 7.828703] systemd[1]: Condition check resulted in Mark the need to relabel after reboot being skipped.
  2313. 2313 [ 7.841358] sdiohal:sdiohal_scan_card
  2314. 2314 [ 7.841541] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=50000000
  2315. 2315 [ 7.841641] WCN: marlin_scan_finish!
  2316. 2316 [ 7.841646] sdiohal:probe ok
  2317. 2317 [ 7.841762] sdiohal:scan end!
  2318. 2318 [ 7.841769] WCN: then marlin start to download
  2319. 2319 [ 7.841983] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001
  2320. 2320 [ 7.841995] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start!
  2321. 2321 [ 7.848472] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  2322. 2322 [ 7.848700] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  2323. 2323 [ 7.848985] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  2324. 2324 [ 7.851614] systemd[1]: Finished Set console font and keymap.
  2325. 2325 [ 7.889453] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
  2326. 2326 [ 7.983380] systemd[1]: Finished Armbian leds state.
  2327. 2327 [ 8.131291] systemd[1]: Started Rule-based Manager for Device Events and Files.
  2328. 2328 [ 8.191576] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  2329. 2329 [ 8.208225] systemd[1]: Starting Load/Save RF Kill Switch Status...
  2330. 2330 [ 8.345561] bluetooth_set_power: start_block=0
  2331. 2331 [ 8.345588] WCN: start_marlin [MARLIN_BLUETOOTH]
  2332. 2332 [ 8.350967] zram: Added device: zram0
  2333. 2333 [ 8.351917] zram: Added device: zram1
  2334. 2334 [ 8.352756] zram: Added device: zram2
  2335. 2335 [ 8.486476] mc: Linux media interface: v0.10
  2336. 2336 [ 8.489011] zram0: detected capacity change from 0 to 2037304
  2337. 2337 [ 8.508402] panfrost 1800000.gpu: clock rate = 432000000
  2338. 2338 [ 8.508444] panfrost 1800000.gpu: bus_clock rate = 100000000
  2339. 2339 [ 8.508789] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0
  2340. 2340 [ 8.508806] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400
  2341. 2341 [ 8.508814] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7
  2342. 2342 [ 8.508822] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1
  2343. 2343 [ 8.511615] [drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 1
  2344. 2344 [ 8.517699] videodev: Linux video capture interface: v2.00
  2345. 2345 [ 8.560697] Adding 1018648k swap on /dev/zram0. Priority:5 extents:1 across:1018648k SSFS
  2346. 2346 [ 8.568197] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned.
  2347. 2347 [ 8.569250] cedrus 1c0e000.video-codec: Adding to iommu group 0
  2348. 2348 [ 8.569490] systemd[1]: Found device /dev/ttyS0.
  2349. 2349 [ 8.570090] cedrus 1c0e000.video-codec: Device registered as /dev/video0
  2350. 2350 [ 8.797511] WCN: combin_img 0 marlin_firmware_write finish and successful
  2351. 2351 [ 8.797829] WCN: marlin_start_run read reset reg val:0x1
  2352. 2352 [ 8.797842] WCN: after do marlin_start_run reset reg val:0x0
  2353. 2353 [ 8.798090] WCN: s_marlin_bootup_time=8798089841
  2354. 2354 [ 8.804773] WCN: clock mode: TSX
  2355. 2355 [ 8.804982] WCN: marlin_write_cali_data sync init_state:0xe3a208b2
  2356. 2356 [ 8.809955] Registered IR keymap rc-empty
  2357. 2357 [ 8.810154] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0
  2358. 2358 [ 8.813372] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
  2359. 2359 [ 8.815469] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input4
  2360. 2360 [ 8.815940] sunxi-ir 7040000.ir: initialized sunXi IR driver
  2361. 2361 [ 8.829702] WCN: marlin_write_cali_data sync init_state:0xe3a208b2
  2362. 2362 [ 8.858630] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1
  2363. 2363 [ 8.858650] WCN: sdio_config bt_wake_host trigger:[high]
  2364. 2364 [ 8.858653] WCN: sdio_config irq:[inband]
  2365. 2365 [ 8.858655] WCN: sdio_config wake_host_level_duration_time:[20ms]
  2366. 2366 [ 8.858659] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse]
  2367. 2367 [ 8.858662] WCN: marlin_send_sdio_config_to_cp sdio_config:0x80f01 (enable config)
  2368. 2368 [ 8.859047] WCN: marlin_write_cali_data finish
  2369. 2369 [ 8.859230] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  2370. 2370 [ 8.889335] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  2371. 2371 [ 8.909960] zram1: detected capacity change from 0 to 102400
  2372. 2372 [ 8.917557] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  2373. 2373 [ 8.948374] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  2374. 2374 [ 8.973640] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0
  2375. 2375 [ 8.973667] WCN: marlin_bind_verify confuse data: 0x9a09621a17108a98b0beb1aa8a12b210
  2376. 2376 [ 8.973684] WCN: marlin_bind_verify verify data: 0xf5920a7267261c0fd5ba8927b860860b
  2377. 2377 [ 8.974644] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0
  2378. 2378 [ 8.974667] sdiohal:sdiohal_runtime_get entry
  2379. 2379 [ 8.974872] WCN: get_cp2_version entry!
  2380. 2380 [ 8.976676] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~
  2381. 2381 [ 8.976729] WCN: switch_cp2_log - close entry!
  2382. 2382 [ 8.977941] WCN: WCND at cmd read:OK
  2383. 2383 [ 8.978001] WCN: then marlin download finished and run ok
  2384. 2384 [ 8.978019] WCN: start_loopcheck
  2385. 2385 [ 8.978172] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1
  2386. 2386 [ 8.978180] WCN: marlin have open, GNSS is closed
  2387. 2387 [ 8.978183] bluetooth_set_power: end_block=0
  2388. 2388 [ 9.001655] systemd[1]: Started Load/Save RF Kill Switch Status.
  2389. 2389 [ 9.008717] WCN: get_board_ant_num [one_ant]
  2390. 2390 [ 9.008745] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini
  2391. 2391 [ 9.080361] systemd[1]: Finished Armbian ZRAM config.
  2392. 2392 [ 9.081743] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings.
  2393. 2393 [ 9.119357] systemd[1]: Finished Load Kernel Modules.
  2394. 2394 [ 9.128530] systemd[1]: Starting Armbian memory supported logging...
  2395. 2395 [ 9.192562] systemd[1]: Starting Apply Kernel Variables...
  2396. 2396 [ 9.218613] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none.
  2397. 2397 [ 9.241777] systemd[1]: Finished Apply Kernel Variables.
  2398. 2398 [ 9.246786] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  2399. 2399 [ 9.251054] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  2400. 2400 [ 9.255241] systemd[1]: Starting Raise network interfaces...
  2401. 2401 [ 9.259344] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  2402. 2402 [ 9.259519] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  2403. 2403 [ 9.259720] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  2404. 2404 [ 9.259897] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  2405. 2405 [ 9.797648] systemd[1]: Finished Raise network interfaces.
  2406. 2406 [ 10.230934] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  2407. 2407 [ 10.231250] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  2408. 2408 [ 10.231315] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  2409. 2409 [ 10.231412] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  2410. 2410 [ 10.231481] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  2411. 2411 [ 11.080742] systemd[1]: Finished Armbian memory supported logging.
  2412. 2412 [ 11.091629] systemd[1]: Starting Journal Service...
  2413. 2413 [ 11.221155] systemd[1]: Started Journal Service.
  2414. 2414 [ 11.248169] systemd-journald[683]: Received client request to flush runtime journal.
  2415. 2415
  2416. 2416 ### armbian-release:
  2417. 2417
  2418. 2418 # PLEASE DO NOT EDIT THIS FILE
  2419. 2419 BOARD=orangepi3-lts
  2420. 2420 BOARD_NAME="Orange Pi 3 LTS"
  2421. 2421 BOARDFAMILY=sun50iw6
  2422. 2422 BUILD_REPOSITORY_URL=https://github.com/armbian/build
  2423. 2423 BUILD_REPOSITORY_COMMIT=13f5fba13c
  2424. 2424 VERSION=22.05.3
  2425. 2425 LINUXFAMILY=sunxi64
  2426. 2426 ARCH=arm64
  2427. 2427 IMAGE_TYPE=stable
  2428. 2428 BOARD_TYPE=conf
  2429. 2429 INITRD_ARCH=arm64
  2430. 2430 KERNEL_IMAGE_TYPE=stable
  2431. 2431 BRANCH=current
  2432. 2432
  2433. 2433 ### boot environment:
  2434. 2434
  2435. 2435 verbosity=1
  2436. 2436 bootlogo=false
  2437. 2437 console=both
  2438. 2438 disp_mode=1920x1080p60
  2439. 2439 overlay_prefix=sun50i-h6
  2440. 2440 rootdev=UUID=81cc9469-982a-4232-8db4-540eebdd7c04
  2441. 2441 rootfstype=ext4
  2442. 2442 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u
  2443. 2443
  2444. 2444 ### lsusb:
  2445. 2445
  2446. 2446 Wed Jun 29 01:25:41 AM UTC 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64
  2447. 2447 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  2448. 2448 Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  2449. 2449 Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  2450. 2450 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  2451. 2451 Bus 005 Device 002: ID 04f3:0103 Elan Microelectronics Corp. ActiveJet K-2024 Multimedia Keyboard
  2452. 2452 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  2453. 2453 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  2454. 2454 Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  2455. 2455
  2456. 2456 ### lscpu:
  2457. 2457
  2458. 2458 Architecture: aarch64
  2459. 2459 CPU op-mode(s): 32-bit, 64-bit
  2460. 2460 Byte Order: Little Endian
  2461. 2461 CPU(s): 4
  2462. 2462 On-line CPU(s) list: 0-3
  2463. 2463 Vendor ID: ARM
  2464. 2464 Model name: Cortex-A53
  2465. 2465 Model: 4
  2466. 2466 Thread(s) per core: 1
  2467. 2467 Core(s) per cluster: 4
  2468. 2468 Socket(s): -
  2469. 2469 Cluster(s): 1
  2470. 2470 Stepping: r0p4
  2471. 2471 CPU max MHz: 1800.0000
  2472. 2472 CPU min MHz: 480.0000
  2473. 2473 BogoMIPS: 48.00
  2474. 2474 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  2475. 2475 NUMA node(s): 1
  2476. 2476 NUMA node0 CPU(s): 0-3
  2477. 2477 Vulnerability Itlb multihit: Not affected
  2478. 2478 Vulnerability L1tf: Not affected
  2479. 2479 Vulnerability Mds: Not affected
  2480. 2480 Vulnerability Meltdown: Not affected
  2481. 2481 Vulnerability Mmio stale data: Not affected
  2482. 2482 Vulnerability Spec store bypass: Not affected
  2483. 2483 Vulnerability Spectre v1: Mitigation; __user pointer sanitization
  2484. 2484 Vulnerability Spectre v2: Not affected
  2485. 2485 Vulnerability Srbds: Not affected
  2486. 2486 Vulnerability Tsx async abort: Not affected
  2487. 2487
  2488. 2488 ### cpuinfo:
  2489. 2489
  2490. 2490 processor : 0
  2491. 2491 BogoMIPS : 48.00
  2492. 2492 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  2493. 2493 CPU implementer : 0x41
  2494. 2494 CPU architecture: 8
  2495. 2495 CPU variant : 0x0
  2496. 2496 CPU part : 0xd03
  2497. 2497 CPU revision : 4
  2498. 2498
  2499. 2499 processor : 1
  2500. 2500 BogoMIPS : 48.00
  2501. 2501 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  2502. 2502 CPU implementer : 0x41
  2503. 2503 CPU architecture: 8
  2504. 2504 CPU variant : 0x0
  2505. 2505 CPU part : 0xd03
  2506. 2506 CPU revision : 4
  2507. 2507
  2508. 2508 processor : 2
  2509. 2509 BogoMIPS : 48.00
  2510. 2510 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  2511. 2511 CPU implementer : 0x41
  2512. 2512 CPU architecture: 8
  2513. 2513 CPU variant : 0x0
  2514. 2514 CPU part : 0xd03
  2515. 2515 CPU revision : 4
  2516. 2516
  2517. 2517 processor : 3
  2518. 2518 BogoMIPS : 48.00
  2519. 2519 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  2520. 2520 CPU implementer : 0x41
  2521. 2521 CPU architecture: 8
  2522. 2522 CPU variant : 0x0
  2523. 2523 CPU part : 0xd03
  2524. 2524 CPU revision : 4
  2525. 2525
  2526. 2526
  2527. 2527 ### meminfo:
  2528. 2528
  2529. 2529 MemTotal: 2037300 kB
  2530. 2530 MemFree: 1855124 kB
  2531. 2531 MemAvailable: 1855740 kB
  2532. 2532 Buffers: 10084 kB
  2533. 2533 Cached: 50856 kB
  2534. 2534 SwapCached: 0 kB
  2535. 2535 Active: 25924 kB
  2536. 2536 Inactive: 55268 kB
  2537. 2537 Active(anon): 400 kB
  2538. 2538 Inactive(anon): 23224 kB
  2539. 2539 Active(file): 25524 kB
  2540. 2540 Inactive(file): 32044 kB
  2541. 2541 Unevictable: 0 kB
  2542. 2542 Mlocked: 0 kB
  2543. 2543 SwapTotal: 1018648 kB
  2544. 2544 SwapFree: 1018648 kB
  2545. 2545 Dirty: 1444 kB
  2546. 2546 Writeback: 0 kB
  2547. 2547 AnonPages: 20388 kB
  2548. 2548 Mapped: 18344 kB
  2549. 2549 Shmem: 3368 kB
  2550. 2550 KReclaimable: 10000 kB
  2551. 2551 Slab: 45964 kB
  2552. 2552 SReclaimable: 10000 kB
  2553. 2553 SUnreclaim: 35964 kB
  2554. 2554 KernelStack: 2608 kB
  2555. 2555 PageTables: 1612 kB
  2556. 2556 NFS_Unstable: 0 kB
  2557. 2557 Bounce: 0 kB
  2558. 2558 WritebackTmp: 0 kB
  2559. 2559 CommitLimit: 2037296 kB
  2560. 2560 Committed_AS: 43400 kB
  2561. 2561 VmallocTotal: 133143592960 kB
  2562. 2562 VmallocUsed: 23560 kB
  2563. 2563 VmallocChunk: 0 kB
  2564. 2564 Percpu: 1024 kB
  2565. 2565 AnonHugePages: 0 kB
  2566. 2566 ShmemHugePages: 0 kB
  2567. 2567 ShmemPmdMapped: 0 kB
  2568. 2568 FileHugePages: 0 kB
  2569. 2569 FilePmdMapped: 0 kB
  2570. 2570 CmaTotal: 131072 kB
  2571. 2571 CmaFree: 128768 kB
  2572. 2572 HugePages_Total: 0
  2573. 2573 HugePages_Free: 0
  2574. 2574 HugePages_Rsvd: 0
  2575. 2575 HugePages_Surp: 0
  2576. 2576 Hugepagesize: 2048 kB
  2577. 2577 Hugetlb: 0 kB
  2578. 2578
  2579. 2579 ### virtual memory:
  2580. 2580
  2581. 2581 vm.admin_reserve_kbytes = 8192
  2582. 2582 vm.compaction_proactiveness = 20
  2583. 2583 vm.compact_unevictable_allowed = 1
  2584. 2584 vm.dirty_background_bytes = 0
  2585. 2585 vm.dirty_background_ratio = 10
  2586. 2586 vm.dirty_bytes = 0
  2587. 2587 vm.dirty_expire_centisecs = 3000
  2588. 2588 vm.dirty_ratio = 20
  2589. 2589 vm.dirtytime_expire_seconds = 43200
  2590. 2590 vm.dirty_writeback_centisecs = 500
  2591. 2591 vm.extfrag_threshold = 500
  2592. 2592 vm.hugetlb_shm_group = 0
  2593. 2593 vm.laptop_mode = 0
  2594. 2594 vm.legacy_va_layout = 0
  2595. 2595 vm.lowmem_reserve_ratio = 256 256 32 0
  2596. 2596 vm.max_map_count = 65530
  2597. 2597 vm.min_free_kbytes = 22528
  2598. 2598 vm.min_slab_ratio = 5
  2599. 2599 vm.min_unmapped_ratio = 1
  2600. 2600 vm.mmap_min_addr = 32768
  2601. 2601 vm.mmap_rnd_bits = 18
  2602. 2602 vm.mmap_rnd_compat_bits = 11
  2603. 2603 vm.nr_hugepages = 0
  2604. 2604 vm.nr_hugepages_mempolicy = 0
  2605. 2605 vm.nr_overcommit_hugepages = 0
  2606. 2606 vm.numa_stat = 1
  2607. 2607 vm.numa_zonelist_order = Node
  2608. 2608 vm.oom_dump_tasks = 1
  2609. 2609 vm.oom_kill_allocating_task = 0
  2610. 2610 vm.overcommit_kbytes = 0
  2611. 2611 vm.overcommit_memory = 0
  2612. 2612 vm.overcommit_ratio = 50
  2613. 2613 vm.page-cluster = 0
  2614. 2614 vm.page_lock_unfairness = 5
  2615. 2615 vm.panic_on_oom = 0
  2616. 2616
  2617. 2617 ### [resize2fs] 4GiB or smaller media - leaving 5% spare area. Start resizing partition /dev/mmcblk0p1 now:
  2618. 2618
  2619. 2619 major minor #blocks name
  2620. 2620
  2621. 2621 179 0 1931264 mmcblk0
  2622. 2622 179 1 1814528 mmcblk0p1
  2623. 2623 179 32 7634944 mmcblk2
  2624. 2624 179 33 2045935 mmcblk2p1
  2625. 2625 179 34 16384 mmcblk2p2
  2626. 2626 179 35 16384 mmcblk2p3
  2627. 2627 179 36 32768 mmcblk2p4
  2628. 2628 179 37 2097152 mmcblk2p5
  2629. 2629 179 38 307200 mmcblk2p6
  2630. 2630 179 39 16384 mmcblk2p7
  2631. 2631 179 40 16384 mmcblk2p8
  2632. 2632 179 41 32768 mmcblk2p9
  2633. 2633 179 42 2097152 mmcblk2p10
  2634. 2634 179 43 16384 mmcblk2p11
  2635. 2635 179 44 65536 mmcblk2p12
  2636. 2636 179 45 2048 mmcblk2p13
  2637. 2637 179 46 32768 mmcblk2p14
  2638. 2638 179 47 16384 mmcblk2p15
  2639. 2639 179 48 786432 mmcblk2p16
  2640. 2640 252 0 1018652 zram0
  2641. 2641 252 1 51200 zram1
  2642. 2642
  2643. 2643 Executing fdisk, fsck and partprobe:
  2644. 2644 vm.percpu_pagelist_high_fraction = 0
  2645. 2645 vm.stat_interval = 1
  2646. 2646 vm.swappiness = 100
  2647. 2647 vm.user_reserve_kbytes = 63004
  2648. 2648
  2649. 2649 Welcome to fdisk (util-linux 2.37.2).
  2650. 2650 Changes will remain in memory only, until you decide to write them.
  2651. 2651 Be careful before using the write command.
  2652. 2652
  2653. 2653 This disk is currently in use - repartitioning is probably a bad idea.
  2654. 2654 It's recommended to umount all file systems, and swapoff all swap
  2655. 2655 partitions on this disk.
  2656. 2656
  2657. 2657
  2658. 2658 Command (m for help):
  2659. 2659 Selected partition 1
  2660. 2660 Partition 1 has been deleted.
  2661. 2661
  2662. 2662 Command (m for help): Partition type
  2663. 2663 p primary (0 primary, 0 extended, 4 free)
  2664. 2664 e extended (container for logical partitions)
  2665. 2665 Select (default p): Partition number (1-4, default 1): First sector (2048-3862527, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (8192-3862527, default 3862527): vm.vfs_cache_pressure = 100
  2666. 2666 vm.watermark_boost_factor = 15000
  2667. 2667 vm.watermark_scale_factor = 10
  2668. 2668 vm.zone_reclaim_mode = 0
  2669. 2669
  2670. 2670 Created a new partition 1 of type 'Linux' and of size 1.7 GiB.
  2671. 2671 Partition #1 contains a ext4 signature.
  2672. 2672
  2673. 2673 Command (m for help):
  2674. 2674 ### ip addr:
  2675. 2675
  2676. 2676 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
  2677. 2677 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  2678. 2678 inet XXX.XXX.0.1/8 scope host lo
  2679. 2679 valid_lft forever preferred_lft forever
  2680. 2680 inet6 ::1/128 scope host
  2681. 2681 valid_lft forever preferred_lft forever
  2682. 2682 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
  2683. 2683 link/ether 02:07:98:a2:a6:2d brd ff:ff:ff:ff:ff:ff
  2684. 2684 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
  2685. 2685 link/ether a4:99:da:28:2f:13 brd ff:ff:ff:ff:ff:ff
  2686. 2686
  2687. 2687 ### partitions:
  2688. 2688
  2689. 2689 major minor #blocks name
  2690. 2690
  2691. 2691 179 0 1931264 mmcblk0
  2692. 2692 179 1 1814528 mmcblk0p1
  2693. 2693 179 32 7634944 mmcblk2
  2694. 2694 179 33 2045935 mmcblk2p1
  2695. 2695 179 34 16384 mmcblk2p2
  2696. 2696 179 35 16384 mmcblk2p3
  2697. 2697 179 36 32768 mmcblk2p4
  2698. 2698 179 37 2097152 mmcblk2p5
  2699. 2699 179 38 307200 mmcblk2p6
  2700. 2700 179 39 16384 mmcblk2p7
  2701. 2701 179 40 16384 mmcblk2p8
  2702. 2702 179 41 32768 mmcblk2p9
  2703. 2703 179 42 2097152 mmcblk2p10
  2704. 2704 179 43 16384 mmcblk2p11
  2705. 2705 179 44 65536 mmcblk2p12
  2706. 2706 179 45 2048 mmcblk2p13
  2707. 2707 179 46 32768 mmcblk2p14
  2708. 2708 179 47 16384 mmcblk2p15
  2709. 2709 179 48 786432 mmcblk2p16
  2710. 2710 252 0 1018652 zram0
  2711. 2711 252 1 51200 zram1
  2712. 2712
  2713. 2713 ### df:
  2714. 2714
  2715. 2715 tmpfs 199M 3.4M 196M 2% /run
  2716. 2716 /dev/mmcblk0p1 1.7G 1.4G 272M 84% /
  2717. 2717 tmpfs 995M 0 995M 0% /dev/shm
  2718. 2718 tmpfs 5.0M 4.0K 5.0M 1% /run/lock
  2719. 2719 tmpfs 995M 0 995M 0% /tmp
  2720. 2720 /dev/zram1 47M 1.4M 42M 4% /var/log
  2721. 2721
  2722. 2722 ### lsblk:
  2723. 2723
  2724. 2724 NAME FSTYPE SIZE MOUNTPOINT UUID
  2725. 2725 mmcblk0 1.8G
  2726. 2726 └─mmcblk0p1 ext4 1.7G / 81cc9469-982a-4232-8db4-540eebdd7c04
  2727. 2727 mmcblk2 7.3G
  2728. 2728 ├─mmcblk2p1 f2fs 2G 9b7ef4bd-c41f-449b-ab7e-62bbc5b8d119
  2729. 2729 ├─mmcblk2p2 vfat 16M
  2730. 2730 ├─mmcblk2p3 16M
  2731. 2731 ├─mmcblk2p4 32M
  2732. 2732 ├─mmcblk2p5 ext4 2G 2cba03d8-ce15-4509-9cbe-1b8e1cee2ed8
  2733. 2733 ├─mmcblk2p6 ext4 300M 99330148-936b-450c-ba42-a8138adb126c
  2734. 2734 ├─mmcblk2p7 16M
  2735. 2735 ├─mmcblk2p8 16M
  2736. 2736 ├─mmcblk2p9 32M
  2737. 2737 ├─mmcblk2p10 2G
  2738. 2738 ├─mmcblk2p11 16M
  2739. 2739 ├─mmcblk2p12 64M
  2740. 2740 ├─mmcblk2p13 2M
  2741. 2741 ├─mmcblk2p14 32M
  2742. 2742 ├─mmcblk2p15 16M
  2743. 2743 └─mmcblk2p16 ext4 768M 7d68b65b-c1e2-45a5-8c97-5afaa377ea42
  2744. 2744 mmcblk2boot0 4M
  2745. 2745 mmcblk2boot1 4M
  2746. 2746 zram1 50M /var/log
  2747. 2747 zram2 0B
  2748. 2748
  2749. 2749 ### zramctl:
  2750. 2750
  2751. 2751 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT
  2752. 2752 /dev/zram1 zstd 50M 1.4M 250.4K 632K 4 /var/log
  2753. 2753 /dev/zram0 lzo-rle 994.8M 4K 74B 12K 4 [SWAP]
  2754. 2754
  2755. 2755 ### mtab:
  2756. 2756
  2757. 2757 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0
  2758. 2758 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0
  2759. 2759 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0
  2760. 2760
  2761. 2761 The partition table has been altered.
  2762. 2762 Syncing disks.
  2763. 2763
  2764. 2764 New partition table:
  2765. 2765
  2766. 2766 major minor #blocks name
  2767. 2767
  2768. 2768 179 0 1931264 mmcblk0
  2769. 2769 179 1 1814528 mmcblk0p1
  2770. 2770 179 32 7634944 mmcblk2
  2771. 2771 179 33 2045935 mmcblk2p1
  2772. 2772 179 34 16384 mmcblk2p2
  2773. 2773 179 35 16384 mmcblk2p3
  2774. 2774 179 36 32768 mmcblk2p4
  2775. 2775 179 37 2097152 mmcblk2p5
  2776. 2776 179 38 307200 mmcblk2p6
  2777. 2777 179 39 16384 mmcblk2p7
  2778. 2778 179 40 16384 mmcblk2p8
  2779. 2779 179 41 32768 mmcblk2p9
  2780. 2780 179 42 2097152 mmcblk2p10
  2781. 2781 179 43 16384 mmcblk2p11
  2782. 2782 179 44 65536 mmcblk2p12
  2783. 2783 179 45 2048 mmcblk2p13
  2784. 2784 179 46 32768 mmcblk2p14
  2785. 2785 179 47 16384 mmcblk2p15
  2786. 2786 179 48 786432 mmcblk2p16
  2787. 2787 252 0 1018652 zram0
  2788. 2788 252 1 51200 zram1
  2789. 2789
  2790. 2790 Now trying to resize ext4 filesystem on /dev/mmcblk0p1 to the limits:
  2791. 2791
  2792. 2792 resize2fs 1.46.5 (30-Dec-2021)
  2793. 2793 The filesystem is already 453632 (4k) blocks long. Nothing to do!
  2794. 2794
  2795. 2795
  2796. 2796 ### [resize2fs] Automated reboot needed to finish the resize procedure
  2797. 2797
  2798. 2798 ### mmc0:e624 info:
  2799. 2799
  2800. 2800 fwrev: 0x0
  2801. 2801 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SU02G MODALIAS=mmc:block
  2802. 2802 cid: 0353445355303247801896a64a00284b
  2803. 2803 rca: 0xe624
  2804. 2804 csd: 002600325f5a83aefefbcfff928040df
  2805. 2805 manfid: 0x000003
  2806. 2806 ocr: 0x00200000
  2807. 2807 preferred_erase_size: 4194304
  2808. 2808 type: SD
  2809. 2809 hwrev: 0x8
  2810. 2810 date: 08/2002
  2811. 2811 dsr: 0x404
  2812. 2812 erase_size: 512
  2813. 2813 oemid: 0x5344
  2814. 2814 serial: 0x1896a64a
  2815. 2815 ssr: 0000000000000028000090000b050900000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
  2816. 2816 scr: 0225800000000000
  2817. 2817 name: SU02G
  2818. 2818
  2819. 2819 ### mmc2:0001 info:
  2820. 2820
  2821. 2821 fwrev: 0x0600000000000000
  2822. 2822 uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=8GTF4R MODALIAS=mmc:block
  2823. 2823 cid: 150100384754463452067d918f05780b
  2824. 2824 rel_sectors: 0x1
  2825. 2825 enhanced_rpmb_supported: 0x1
  2826. 2826 rca: 0x0001
  2827. 2827 pre_eol_info: 0x01
  2828. 2828 csd: d02701320f5903fff6dbffef8e40400d
  2829. 2829 manfid: 0x000015
  2830. 2830 ocr: 0x00200000
  2831. 2831 preferred_erase_size: 4194304
  2832. 2832 enhanced_area_offset: 18446744073709551594
  2833. 2833 raw_rpmb_size_mult: 0x4
  2834. 2834 type: MMC
  2835. 2835 hwrev: 0x0
  2836. 2836 date: 07/2021
  2837. 2837 prv: 0x6
  2838. 2838 ffu_capable: 1
  2839. 2839 dsr: 0x404
  2840. 2840 erase_size: 524288
  2841. 2841 life_time: 0x01 0x01
  2842. 2842 enhanced_area_size: 4294967274
  2843. 2843 oemid: 0x0100
  2844. 2844 serial: 0x7d918f05
  2845. 2845 cmdq_en: 0
  2846. 2846 rev: 0x8
  2847. 2847 name: 8GTF4R
  2848. 2848
  2849. 2849 ### Boot system health:
  2850. 2850
  2851. 2851 Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St.
  2852. 2852 01:25:43: 1488MHz 0.31 44% 20% 12% 0% 11% 0% 64.2°C 0/9
  2853. 2853 01:25:43: 1704MHz 0.31 10% 8% 2% 0% 0% 0% 60.1°C 0/9
  2854. 2854 01:25:43: 1080MHz 0.31 11% 6% 2% 1% 0% 0% 57.7°C 0/9
  2855. 2855 01:25:44: 1320MHz 0.31 10% 7% 2% 0% 0% 0% 57.7°C 0/9
  2856. 2856 01:25:44: 816MHz 0.31 9% 5% 2% 1% 0% 0% 57.3°C 0/9
  2857. 2857
  2858. 2858 ### lsusb:
  2859. 2859
  2860. 2860 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  2861. 2861 Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  2862. 2862 Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
  2863. 2863 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  2864. 2864 Bus 005 Device 002: ID 04f3:0103 Elan Microelectronics Corp. ActiveJet K-2024 Multimedia Keyboard
  2865. 2865 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  2866. 2866 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  2867. 2867 Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  2868. 2868
  2869. 2869 /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M
  2870. 2870 /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M
  2871. 2871 /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M
  2872. 2872 |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
  2873. 2873 |__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
  2874. 2874 /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M
  2875. 2875 /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M
  2876. 2876 /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
  2877. 2877 /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
  2878. 2878
  2879. 2879 ### Userland:
  2880. 2880
  2881. 2881 PRETTY_NAME="Armbian 22.05.3 Jammy"
  2882. 2882
  2883. 2883 ### Installed packages:
  2884. 2884
  2885. 2885 ii armbian-bsp-cli-orangepi3-lts 22.05.3 arm64 Armbian board support files for orangepi3-lts
  2886. 2886 ii armbian-config 22.05.3 all Armbian configuration utility
  2887. 2887 ii armbian-firmware 22.05.3 all Linux firmware
  2888. 2888 ii armbian-zsh 22.05.3 all Armbian improved ZShell
  2889. 2889 ii hostapd 3:2.10-6~armbian22.02.3+1 arm64 IEEE 802.11 AP and IEEE 802.1X/WPA/WPA2/EAP Authenticator
  2890. 2890 ii linux-base 4.5ubuntu9 all Linux image base package
  2891. 2891 ii linux-dtb-current-sunxi64 22.05.3 arm64 Armbian Linux DTB, version 5.15.48-sunxi64 current
  2892. 2892 ii linux-image-current-sunxi64 22.05.3 arm64 Linux kernel, armbian version 5.15.48-sunxi64 current
  2893. 2893 ii linux-libc-dev:arm64 22.05.1 arm64 Armbian Linux support headers for userspace development
  2894. 2894 ii linux-u-boot-orangepi3-lts-current 22.05.3 arm64 Uboot loader 2021.10
  2895. 2895
  2896. 2896 ### Loaded modules:
  2897. 2897
  2898. 2898 Module Size Used by
  2899. 2899 algif_hash 20480 1
  2900. 2900 algif_skcipher 20480 1
  2901. 2901 af_alg 28672 6 algif_hash,algif_skcipher
  2902. 2902 bnep 28672 2
  2903. 2903 hci_uart 131072 1
  2904. 2904 btqca 24576 1 hci_uart
  2905. 2905 btrtl 24576 1 hci_uart
  2906. 2906 btbcm 24576 1 hci_uart
  2907. 2907 btintel 36864 1 hci_uart
  2908. 2908 bluetooth 577536 29 btrtl,btqca,btintel,hci_uart,btbcm,bnep
  2909. 2909 ecdh_generic 16384 2 bluetooth
  2910. 2910 ecc 32768 1 ecdh_generic
  2911. 2911 sch_fq_codel 28672 3
  2912. 2912 snd_soc_hdmi_codec 24576 1
  2913. 2913 snd_soc_simple_card 24576 0
  2914. 2914 snd_soc_simple_card_utils 24576 1 snd_soc_simple_card
  2915. 2915 sunxi_cir 20480 0
  2916. 2916 sun9i_hdmi_audio 16384 0
  2917. 2917 rc_core 49152 2 sunxi_cir
  2918. 2918 dw_hdmi_i2s_audio 16384 0
  2919. 2919 dw_hdmi_cec 16384 0
  2920. 2920 sun4i_i2s 24576 4
  2921. 2921 sunxi_cedrus 49152 0
  2922. 2922 videobuf2_dma_contig 24576 1 sunxi_cedrus
  2923. 2923 v4l2_mem2mem 36864 1 sunxi_cedrus
  2924. 2924 videobuf2_memops 20480 1 videobuf2_dma_contig
  2925. 2925 videobuf2_v4l2 24576 2 sunxi_cedrus,v4l2_mem2mem
  2926. 2926 videobuf2_common 49152 5 sunxi_cedrus,videobuf2_dma_contig,videobuf2_v4l2,v4l2_mem2mem,videobuf2_memops
  2927. 2927 videodev 204800 4 sunxi_cedrus,videobuf2_v4l2,videobuf2_common,v4l2_mem2mem
  2928. 2928 panfrost 65536 0
  2929. 2929 mc 49152 5 sunxi_cedrus,videodev,videobuf2_v4l2,videobuf2_common,v4l2_mem2mem
  2930. 2930 gpu_sched 32768 1 panfrost
  2931. 2931 dump_reg 24576 0
  2932. 2932 display_connector 20480 0
  2933. 2933 cpufreq_dt 20480 0
  2934. 2934 zram 32768 3
  2935. 2935 sprdwl_ng 352256 0
  2936. 2936 sunxi_addr 20480 1 sprdwl_ng
  2937. 2937 cfg80211 348160 1 sprdwl_ng
  2938. 2938 sprdbt_tty 28672 2
  2939. 2939 nfsd 368640 13
  2940. 2940 uwe5622_bsp_sdio 196608 2 sprdbt_tty,sprdwl_ng
  2941. 2941 rfkill 28672 7 sprdbt_tty,bluetooth,cfg80211
  2942. 2942 auth_rpcgss 65536 1 nfsd
  2943. 2943 nfs_acl 20480 1 nfsd
  2944. 2944 lockd 98304 1 nfsd
  2945. 2945 grace 20480 2 nfsd,lockd
  2946. 2946 sunrpc 290816 17 nfsd,auth_rpcgss,lockd,nfs_acl
  2947. 2947 fuse 126976 1
  2948. 2948 motorcomm 24576 1
  2949. 2949 dwmac_sun8i 28672 0
  2950. 2950 pwm_sun4i 20480 1
  2951. 2951 mdio_mux 16384 1 dwmac_sun8i
  2952. 2952 i2c_mv64xxx 24576 0
  2953. 2953
  2954. 2954 ### Current system health:
  2955. 2955
  2956. 2956 Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St.
  2957. 2957 09:26:28: --- 4.08 2% 0% 0% 0% 1% 0% 61.8°C 0/9
  2958. 2958 09:26:28: --- 4.08 27% 2% 0% 0% 24% 0% 64.6°C 0/9
  2959. 2959 09:26:28: --- 4.08 28% 2% 0% 1% 23% 0% 64.6°C 0/9
  2960. 2960 09:26:29: --- 4.08 26% 2% 0% 0% 23% 0% 62.5°C 0/9
  2961. 2961 09:26:29: --- 4.08 27% 2% 0% 0% 24% 0% 62.1°C 0/9
  2962. 2962 09:26:32: --- 4.08 3% 0% 0% 0% 1% 0% 82.0°C 3/9
  2963. 2963 09:26:33: --- 4.47 85% 0% 80% 0% 4% 0% 82.0°C 3/9
  2964. 2964 09:26:33: --- 4.47 28% 3% 0% 0% 24% 0% 68.5°C 0/9
  2965. 2965 09:26:33: --- 4.47 29% 3% 0% 0% 24% 0% 67.3°C 0/9
  2966. 2966 09:26:34: --- 4.47 27% 2% 0% 0% 23% 0% 67.3°C 0/9
  2967. 2967
  2968. 2968 ### resolv.conf
  2969. 2969
  2970. 2970 -rw-r--r-- 1 root root 82 Jun 29 01:26 /etc/resolv.conf
  2971. 2971 # Generated by NetworkManager
  2972. 2972 nameserver XXX.XXX.129.90
  2973. 2973 nameserver XXX.XXX.129.94
  2974. 2974
  2975. 2975 ### Current sysinfo:
  2976. 2976
  2977. 2977 Linux 5.15.48-sunxi64 (orangepi3-lts) 06/29/2022 _aarch64_ (4 CPU)
  2978. 2978
  2979. 2979 avg-cpu: %user %nice %system %iowait %steal %idle
  2980. 2980 0.89 0.00 0.42 1.86 0.00 96.83
  2981. 2981
  2982. 2982 Device tps kB_read/s kB_wrtn/s kB_dscd/s kB_read kB_wrtn kB_dscd
  2983. 2983 mmcblk0 2.45 139.03 3.82 122.84 334757 9204 295772
  2984. 2984 mmcblk0p1 2.33 136.44 3.82 122.84 328513 9200 295772
  2985. 2985 mmcblk2 0.36 8.17 0.00 0.00 19670 0 0
  2986. 2986 mmcblk2p1 0.02 0.88 0.00 0.00 2118 0 0
  2987. 2987 mmcblk2p2 0.02 0.26 0.00 0.00 616 0 0
  2988. 2988 mmcblk2p3 0.02 0.24 0.00 0.00 584 0 0
  2989. 2989 mmcblk2p4 0.02 0.24 0.00 0.00 584 0 0
  2990. 2990 mmcblk2p5 0.02 0.86 0.00 0.00 2080 0 0
  2991. 2991 mmcblk2p6 0.02 0.86 0.00 0.00 2080 0 0
  2992. 2992 mmcblk2p7 0.02 0.24 0.00 0.00 584 0 0
  2993. 2993 mmcblk2p8 0.02 0.24 0.00 0.00 584 0 0
  2994. 2994 mmcblk2p9 0.02 0.24 0.00 0.00 580 0 0
  2995. 2995 mmcblk2p10 0.02 0.87 0.00 0.00 2084 0 0
  2996. 2996 mmcblk2p11 0.02 0.24 0.00 0.00 584 0 0
  2997. 2997 mmcblk2p12 0.02 0.86 0.00 0.00 2080 0 0
  2998. 2998 mmcblk2p13 0.01 0.06 0.00 0.00 140 0 0
  2999. 2999 mmcblk2p14 0.02 0.24 0.00 0.00 580 0 0
  3000. 3000 mmcblk2p15 0.02 0.24 0.00 0.00 584 0 0
  3001. 3001 mmcblk2p16 0.02 0.86 0.00 0.00 2080 0 0
  3002. 3002 mmcblk2boot0 0.00 0.00 0.00 0.00 0 0 0
  3003. 3003 mmcblk2boot1 0.00 0.00 0.00 0.00 0 0 0
  3004. 3004 zram0 0.25 0.98 0.00 0.00 2360 4 0
  3005. 3005 zram1 0.14 0.19 1.01 0.00 464 2440 0
  3006. 3006 zram2 0.00 0.00 0.00 0.00 0 0 0
  3007. 3007
  3008. 3008 --procs-- -----------------------memory---------------------- ---swap-- -----io---- -system-- --------cpu--------
  3009. 3009 r b swpd free buff cache si so bi bo in cs us sy id wa st
  3010. 3010 0 1 0 1452896 14156 397352 0 0 37 2 57 49 1 0 97 2 0
  3011. 3011
  3012. 3012 total used free shared buff/cache available
  3013. 3013 Mem: 1.9Gi 168Mi 1.4Gi 3.0Mi 401Mi 1.7Gi
  3014. 3014 Swap: 994Mi 0B 994Mi
  3015. 3015
  3016. 3016 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT
  3017. 3017 /dev/zram1 zstd 50M 1.7M 332.2K 716K 4 /var/log
  3018. 3018 /dev/zram0 lzo-rle 994.8M 4K 74B 12K 4 [SWAP]
  3019. 3019
  3020. 3020 09:26:38 up 40 min, 2 users, load average: 4.44, 2.25, 1.43
  3021. 3021
  3022. 3022 [ 5.860971] systemd[1]: Detected architecture arm64.
  3023. 3023 [ 5.864198] systemd[1]: Hostname set to <orangepi3-lts>.
  3024. 3024 [ 6.922438] systemd[1]: Queued start job for default target Graphical Interface.
  3025. 3025 [ 6.927918] systemd[1]: Created slice Slice /system/modprobe.
  3026. 3026 [ 6.930572] systemd[1]: Created slice Slice /system/serial-getty.
  3027. 3027 [ 6.932437] systemd[1]: Created slice User and Session Slice.
  3028. 3028 [ 6.933271] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active.
  3029. 3029 [ 6.934092] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  3030. 3030 [ 6.935328] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  3031. 3031 [ 6.935935] systemd[1]: Reached target Local Encrypted Volumes.
  3032. 3032 [ 6.936600] systemd[1]: Reached target Slice Units.
  3033. 3033 [ 6.936949] systemd[1]: Reached target Swaps.
  3034. 3034 [ 6.937263] systemd[1]: Reached target System Time Set.
  3035. 3035 [ 6.937808] systemd[1]: Reached target Local Verity Protected Volumes.
  3036. 3036 [ 6.956406] systemd[1]: Listening on RPCbind Server Activation Socket.
  3037. 3037 [ 6.957812] systemd[1]: Listening on Syslog Socket.
  3038. 3038 [ 6.958777] systemd[1]: Listening on fsck to fsckd communication Socket.
  3039. 3039 [ 6.959423] systemd[1]: Listening on initctl Compatibility Named Pipe.
  3040. 3040 [ 6.960838] systemd[1]: Listening on Journal Audit Socket.
  3041. 3041 [ 6.961882] systemd[1]: Listening on Journal Socket (/dev/log).
  3042. 3042 [ 6.962949] systemd[1]: Listening on Journal Socket.
  3043. 3043 [ 6.964134] systemd[1]: Listening on udev Control Socket.
  3044. 3044 [ 6.965040] systemd[1]: Listening on udev Kernel Socket.
  3045. 3045 [ 6.965462] systemd[1]: Reached target Socket Units.
  3046. 3046 [ 6.969811] systemd[1]: Mounting Huge Pages File System...
  3047. 3047 [ 6.974863] systemd[1]: Mounting POSIX Message Queue File System...
  3048. 3048 [ 6.979912] systemd[1]: Mounting NFSD configuration filesystem...
  3049. 3049 [ 6.985745] systemd[1]: Mounting Kernel Debug File System...
  3050. 3050 [ 6.986907] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  3051. 3051 [ 6.987743] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
  3052. 3052 [ 6.995124] systemd[1]: Starting Restore / save the current clock...
  3053. 3053 [ 7.006805] systemd[1]: Starting Set the console keyboard layout...
  3054. 3054 [ 7.012706] systemd[1]: Starting Create List of Static Device Nodes...
  3055. 3055 [ 7.019639] systemd[1]: Starting Load Kernel Module configfs...
  3056. 3056 [ 7.026364] systemd[1]: Starting Load Kernel Module drm...
  3057. 3057 [ 7.033487] systemd[1]: Starting Load Kernel Module fuse...
  3058. 3058 [ 7.040123] systemd[1]: Started Nameserver information manager.
  3059. 3059 [ 7.041687] systemd[1]: Reached target Preparation for Network.
  3060. 3060 [ 7.042889] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
  3061. 3061 [ 7.071814] systemd[1]: Starting Load Kernel Modules...
  3062. 3062 [ 7.078327] systemd[1]: Starting Remount Root and Kernel File Systems...
  3063. 3063 [ 7.083948] systemd[1]: Starting Coldplug All udev Devices...
  3064. 3064 [ 7.097123] fuse: init (API version 7.34)
  3065. 3065 [ 7.098765] systemd[1]: Mounted Huge Pages File System.
  3066. 3066 [ 7.100619] systemd[1]: Mounted POSIX Message Queue File System.
  3067. 3067 [ 7.102077] systemd[1]: Mounted Kernel Debug File System.
  3068. 3068 [ 7.104394] systemd[1]: Finished Restore / save the current clock.
  3069. 3069 [ 7.107552] systemd[1]: Finished Create List of Static Device Nodes.
  3070. 3070 [ 7.109881] systemd[1]: [email protected]: Deactivated successfully.
  3071. 3071 [ 7.111117] systemd[1]: Finished Load Kernel Module configfs.
  3072. 3072 [ 7.113244] systemd[1]: [email protected]: Deactivated successfully.
  3073. 3073 [ 7.114739] systemd[1]: Finished Load Kernel Module drm.
  3074. 3074 [ 7.117008] systemd[1]: [email protected]: Deactivated successfully.
  3075. 3075 [ 7.118345] systemd[1]: Finished Load Kernel Module fuse.
  3076. 3076 [ 7.127055] systemd[1]: Mounting FUSE Control File System...
  3077. 3077 [ 7.132706] systemd[1]: Mounting Kernel Configuration File System...
  3078. 3078 [ 7.140186] systemd[1]: Mounted FUSE Control File System.
  3079. 3079 [ 7.146383] systemd[1]: Mounted Kernel Configuration File System.
  3080. 3080 [ 7.149726] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none.
  3081. 3081 [ 7.154089] RPC: Registered named UNIX socket transport module.
  3082. 3082 [ 7.154111] RPC: Registered udp transport module.
  3083. 3083 [ 7.154116] RPC: Registered tcp transport module.
  3084. 3084 [ 7.154120] RPC: Registered tcp NFSv4.1 backchannel transport module.
  3085. 3085 [ 7.155518] systemd[1]: Finished Remount Root and Kernel File Systems.
  3086. 3086 [ 7.163200] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  3087. 3087 [ 7.168064] systemd[1]: Starting Load/Save Random Seed...
  3088. 3088 [ 7.180308] systemd[1]: Starting Create System Users...
  3089. 3089 [ 7.343037] WCN: marlin_init entry!
  3090. 3090 [ 7.343605] WCN: wcn config bt wake host
  3091. 3091 [ 7.343839] WCN_ERR: dts node for bt_wake not found
  3092. 3092 [ 7.343842] WCN: marlin2 parse_dt some para not config
  3093. 3093 [ 7.343854] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840
  3094. 3094 [ 7.348615] sdiohal:sdiohal_init ok
  3095. 3095 [ 7.349461] WCN: marlin_probe ok!
  3096. 3096 [ 7.375668] Installing knfsd (copyright (C) 1996 [email protected]).
  3097. 3097 [ 7.384430] systemd[1]: Mounted NFSD configuration filesystem.
  3098. 3098 [ 7.393715] systemd[1]: Finished Create System Users.
  3099. 3099 [ 7.405810] systemd[1]: Starting Create Static Device Nodes in /dev...
  3100. 3100 [ 7.472662] systemd[1]: Finished Set the console keyboard layout.
  3101. 3101 [ 7.582013] mtty_probe init device addr: 0x0000000058b01477
  3102. 3102 [ 7.582226] -->rfkill_bluetooth_init
  3103. 3103 [ 7.582375] bluetooth_set_power: start_block=1
  3104. 3104 [ 7.582386] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0
  3105. 3105 [ 7.582396] bluetooth_set_power: end_block=1
  3106. 3106 [ 7.582412] <--rfkill_bluetooth_init
  3107. 3107 [ 7.596105] systemd[1]: Finished Load/Save Random Seed.
  3108. 3108 [ 7.603752] systemd[1]: Condition check resulted in First Boot Complete being skipped.
  3109. 3109 [ 7.639537] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  3110. 3110 [ 7.641113] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  3111. 3111 [ 7.655425] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9
  3112. 3112 [ 7.655536] [ADDR_MGT] addr_mgt_probe: success.
  3113. 3113 [ 7.704767] WCN: start_marlin [MARLIN_WIFI]
  3114. 3114 [ 7.704794] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1
  3115. 3115 [ 7.704803] WCN: the first power on start
  3116. 3116 [ 7.704890] systemd[1]: Finished Create Static Device Nodes in /dev.
  3117. 3117 [ 7.712301] systemd[1]: Reached target Preparation for Local File Systems.
  3118. 3118 [ 7.724730] systemd[1]: Mounting /tmp...
  3119. 3119 [ 7.738778] systemd[1]: Starting Rule-based Manager for Device Events and Files...
  3120. 3120 [ 7.747988] systemd[1]: Finished Coldplug All udev Devices.
  3121. 3121 [ 7.758554] systemd[1]: Mounted /tmp.
  3122. 3122 [ 7.765896] systemd[1]: Reached target Local File Systems.
  3123. 3123 [ 7.778086] systemd[1]: Starting Armbian leds state...
  3124. 3124 [ 7.790593] systemd[1]: Starting Armbian ZRAM config...
  3125. 3125 [ 7.802931] systemd[1]: Starting Set console font and keymap...
  3126. 3126 [ 7.809396] WCN: marlin chip en dummy pull up -- need manually set GPIO
  3127. 3127 [ 7.821194] systemd[1]: Starting Helper to synchronize boot up for ifupdown...
  3128. 3128 [ 7.828441] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped.
  3129. 3129 [ 7.828703] systemd[1]: Condition check resulted in Mark the need to relabel after reboot being skipped.
  3130. 3130 [ 7.841358] sdiohal:sdiohal_scan_card
  3131. 3131 [ 7.841541] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=50000000
  3132. 3132 [ 7.841641] WCN: marlin_scan_finish!
  3133. 3133 [ 7.841646] sdiohal:probe ok
  3134. 3134 [ 7.841762] sdiohal:scan end!
  3135. 3135 [ 7.841769] WCN: then marlin start to download
  3136. 3136 [ 7.841983] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001
  3137. 3137 [ 7.841995] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start!
  3138. 3138 [ 7.848472] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  3139. 3139 [ 7.848700] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  3140. 3140 [ 7.848985] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  3141. 3141 [ 7.851614] systemd[1]: Finished Set console font and keymap.
  3142. 3142 [ 7.889453] systemd[1]: Finished Helper to synchronize boot up for ifupdown.
  3143. 3143 [ 7.983380] systemd[1]: Finished Armbian leds state.
  3144. 3144 [ 8.131291] systemd[1]: Started Rule-based Manager for Device Events and Files.
  3145. 3145 [ 8.191576] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  3146. 3146 [ 8.208225] systemd[1]: Starting Load/Save RF Kill Switch Status...
  3147. 3147 [ 8.345561] bluetooth_set_power: start_block=0
  3148. 3148 [ 8.345588] WCN: start_marlin [MARLIN_BLUETOOTH]
  3149. 3149 [ 8.350967] zram: Added device: zram0
  3150. 3150 [ 8.351917] zram: Added device: zram1
  3151. 3151 [ 8.352756] zram: Added device: zram2
  3152. 3152 [ 8.486476] mc: Linux media interface: v0.10
  3153. 3153 [ 8.489011] zram0: detected capacity change from 0 to 2037304
  3154. 3154 [ 8.508402] panfrost 1800000.gpu: clock rate = 432000000
  3155. 3155 [ 8.508444] panfrost 1800000.gpu: bus_clock rate = 100000000
  3156. 3156 [ 8.508789] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0
  3157. 3157 [ 8.508806] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400
  3158. 3158 [ 8.508814] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7
  3159. 3159 [ 8.508822] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1
  3160. 3160 [ 8.511615] [drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 1
  3161. 3161 [ 8.517699] videodev: Linux video capture interface: v2.00
  3162. 3162 [ 8.560697] Adding 1018648k swap on /dev/zram0. Priority:5 extents:1 across:1018648k SSFS
  3163. 3163 [ 8.568197] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned.
  3164. 3164 [ 8.569250] cedrus 1c0e000.video-codec: Adding to iommu group 0
  3165. 3165 [ 8.569490] systemd[1]: Found device /dev/ttyS0.
  3166. 3166 [ 8.570090] cedrus 1c0e000.video-codec: Device registered as /dev/video0
  3167. 3167 [ 8.797511] WCN: combin_img 0 marlin_firmware_write finish and successful
  3168. 3168 [ 8.797829] WCN: marlin_start_run read reset reg val:0x1
  3169. 3169 [ 8.797842] WCN: after do marlin_start_run reset reg val:0x0
  3170. 3170 [ 8.798090] WCN: s_marlin_bootup_time=8798089841
  3171. 3171 [ 8.804773] WCN: clock mode: TSX
  3172. 3172 [ 8.804982] WCN: marlin_write_cali_data sync init_state:0xe3a208b2
  3173. 3173 [ 8.809955] Registered IR keymap rc-empty
  3174. 3174 [ 8.810154] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0
  3175. 3175 [ 8.813372] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
  3176. 3176 [ 8.815469] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input4
  3177. 3177 [ 8.815940] sunxi-ir 7040000.ir: initialized sunXi IR driver
  3178. 3178 [ 8.829702] WCN: marlin_write_cali_data sync init_state:0xe3a208b2
  3179. 3179 [ 8.858630] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1
  3180. 3180 [ 8.858650] WCN: sdio_config bt_wake_host trigger:[high]
  3181. 3181 [ 8.858653] WCN: sdio_config irq:[inband]
  3182. 3182 [ 8.858655] WCN: sdio_config wake_host_level_duration_time:[20ms]
  3183. 3183 [ 8.858659] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse]
  3184. 3184 [ 8.858662] WCN: marlin_send_sdio_config_to_cp sdio_config:0x80f01 (enable config)
  3185. 3185 [ 8.859047] WCN: marlin_write_cali_data finish
  3186. 3186 [ 8.859230] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  3187. 3187 [ 8.889335] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  3188. 3188 [ 8.909960] zram1: detected capacity change from 0 to 102400
  3189. 3189 [ 8.917557] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  3190. 3190 [ 8.948374] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0
  3191. 3191 [ 8.973640] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0
  3192. 3192 [ 8.973667] WCN: marlin_bind_verify confuse data: 0x9a09621a17108a98b0beb1aa8a12b210
  3193. 3193 [ 8.973684] WCN: marlin_bind_verify verify data: 0xf5920a7267261c0fd5ba8927b860860b
  3194. 3194 [ 8.974644] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0
  3195. 3195 [ 8.974667] sdiohal:sdiohal_runtime_get entry
  3196. 3196 [ 8.974872] WCN: get_cp2_version entry!
  3197. 3197 [ 8.976676] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~
  3198. 3198 [ 8.976729] WCN: switch_cp2_log - close entry!
  3199. 3199 [ 8.977941] WCN: WCND at cmd read:OK
  3200. 3200 [ 8.978001] WCN: then marlin download finished and run ok
  3201. 3201 [ 8.978019] WCN: start_loopcheck
  3202. 3202 [ 8.978172] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1
  3203. 3203 [ 8.978180] WCN: marlin have open, GNSS is closed
  3204. 3204 [ 8.978183] bluetooth_set_power: end_block=0
  3205. 3205 [ 9.001655] systemd[1]: Started Load/Save RF Kill Switch Status.
  3206. 3206 [ 9.008717] WCN: get_board_ant_num [one_ant]
  3207. 3207 [ 9.008745] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini
  3208. 3208 [ 9.080361] systemd[1]: Finished Armbian ZRAM config.
  3209. 3209 [ 9.081743] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings.
  3210. 3210 [ 9.119357] systemd[1]: Finished Load Kernel Modules.
  3211. 3211 [ 9.128530] systemd[1]: Starting Armbian memory supported logging...
  3212. 3212 [ 9.192562] systemd[1]: Starting Apply Kernel Variables...
  3213. 3213 [ 9.218613] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none.
  3214. 3214 [ 9.241777] systemd[1]: Finished Apply Kernel Variables.
  3215. 3215 [ 9.246786] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  3216. 3216 [ 9.251054] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  3217. 3217 [ 9.255241] systemd[1]: Starting Raise network interfaces...
  3218. 3218 [ 9.259344] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  3219. 3219 [ 9.259519] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  3220. 3220 [ 9.259720] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  3221. 3221 [ 9.259897] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  3222. 3222 [ 9.797648] systemd[1]: Finished Raise network interfaces.
  3223. 3223 [ 10.230934] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  3224. 3224 [ 10.231250] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  3225. 3225 [ 10.231315] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  3226. 3226 [ 10.231412] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  3227. 3227 [ 10.231481] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  3228. 3228 [ 11.080742] systemd[1]: Finished Armbian memory supported logging.
  3229. 3229 [ 11.091629] systemd[1]: Starting Journal Service...
  3230. 3230 [ 11.221155] systemd[1]: Started Journal Service.
  3231. 3231 [ 11.248169] systemd-journald[683]: Received client request to flush runtime journal.
  3232. 3232 [ 27.746704] bluetooth_set_power: start_block=0
  3233. 3233 [ 27.746735] WCN: start_marlin [MARLIN_BLUETOOTH]
  3234. 3234 [ 27.746743] WCN: marlin power state:5, subsys: [MARLIN_BLUETOOTH] power 1
  3235. 3235 [ 27.746747] WCN: marlin have open, GNSS is closed
  3236. 3236 [ 27.746751] bluetooth_set_power: end_block=0
  3237. 3237 [ 28.173492] mtty_open device success!
  3238. 3238 [ 28.905361] Bluetooth: Core ver 2.22
  3239. 3239 [ 28.905495] NET: Registered PF_BLUETOOTH protocol family
  3240. 3240 [ 28.905499] Bluetooth: HCI device and connection manager initialized
  3241. 3241 [ 28.905517] Bluetooth: HCI socket layer initialized
  3242. 3242 [ 28.905524] Bluetooth: L2CAP socket layer initialized
  3243. 3243 [ 28.905536] Bluetooth: SCO socket layer initialized
  3244. 3244 [ 29.085578] Bluetooth: HCI UART driver ver 2.3
  3245. 3245 [ 29.085603] Bluetooth: HCI UART protocol H4 registered
  3246. 3246 [ 29.085606] Bluetooth: HCI UART protocol BCSP registered
  3247. 3247 [ 29.085694] Bluetooth: HCI UART protocol LL registered
  3248. 3248 [ 29.085699] Bluetooth: HCI UART protocol ATH3K registered
  3249. 3249 [ 29.085721] Bluetooth: HCI UART protocol Three-wire (H5) registered
  3250. 3250 [ 29.085949] Bluetooth: HCI UART protocol Intel registered
  3251. 3251 [ 29.086044] Bluetooth: HCI UART protocol Broadcom registered
  3252. 3252 [ 29.086072] Bluetooth: HCI UART protocol QCA registered
  3253. 3253 [ 29.086076] Bluetooth: HCI UART protocol AG6XX registered
  3254. 3254 [ 29.086101] Bluetooth: HCI UART protocol Marvell registered
  3255. 3255 [ 29.892804] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  3256. 3256 [ 29.892835] Bluetooth: BNEP filters: protocol multicast
  3257. 3257 [ 29.892856] Bluetooth: BNEP socket layer initialized
  3258. 3258 [ 30.490663] NET: Registered PF_ALG protocol family
  3259. 3259 [ 30.749008] NFSD: Using nfsdcld client tracking operations.
  3260. 3260 [ 30.749031] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000)
  3261. 3261 [ 31.024465] sun8i-ce 1904000.crypto: Fallback for ecb-aes-sun8i-ce is ecb-aes-ce
  3262. 3262 [ 31.476838] dwmac-sun8i 5020000.ethernet eth0: PHY [stmmac-0:01] driver [YT8531 Gigabit Ethernet] (irq=POLL)
  3263. 3263 [ 31.478910] dwmac-sun8i 5020000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
  3264. 3264 [ 31.479632] dwmac-sun8i 5020000.ethernet eth0: No Safety Features support found
  3265. 3265 [ 31.479656] dwmac-sun8i 5020000.ethernet eth0: No MAC Management Counters available
  3266. 3266 [ 31.479665] dwmac-sun8i 5020000.ethernet eth0: PTP not supported by HW
  3267. 3267 [ 31.480135] dwmac-sun8i 5020000.ethernet eth0: configuring for phy/rgmii-id link mode
  3268. 3268 [ 34.533994] dwmac-sun8i 5020000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  3269. 3269 [ 34.534045] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  3270. 3270 [ 2294.528413] sunxi-mmc 4020000.mmc: data error, sending stop command
  3271. 3271 [ 2295.535851] sunxi-mmc 4020000.mmc: send stop command failed
  3272. 3272
  3273. 3273
  3274. 3274
  3275. 3275 ### interrupts:
  3276. 3276 CPU0 CPU1 CPU2 CPU3
  3277. 3277 11: 53065 49836 19095 19651 GICv2 30 Level arch_timer
  3278. 3278 14: 0 0 0 0 GICv2 80 Level timer@3009000
  3279. 3279 15: 0 0 0 0 GICv2 172 Level arm-pmu
  3280. 3280 16: 0 0 0 0 GICv2 173 Level arm-pmu
  3281. 3281 17: 0 0 0 0 GICv2 174 Level arm-pmu
  3282. 3282 18: 0 0 0 0 GICv2 175 Level arm-pmu
  3283. 3283 19: 0 0 0 0 GICv2 121 Level 1c0e000.video-codec
  3284. 3284 20: 0 0 0 0 GICv2 116 Level panfrost-job
  3285. 3285 21: 0 0 0 0 GICv2 117 Level panfrost-mmu
  3286. 3286 22: 2 0 0 0 GICv2 115 Level panfrost-gpu
  3287. 3287 23: 41 0 0 0 GICv2 119 Level sun8i-ce-ns
  3288. 3288 24: 0 0 0 0 GICv2 75 Level 3002000.dma-controller
  3289. 3289 25: 0 0 0 0 GICv2 76 Level 3003000.mailbox
  3290. 3290 31: 0 0 0 0 GICv2 89 Level 30f0000.iommu
  3291. 3291 32: 3135 0 0 5630 GICv2 67 Level sunxi-mmc
  3292. 3292 33: 60412 0 0 0 GICv2 68 Level sunxi-mmc
  3293. 3293 34: 924 0 0 0 GICv2 69 Level sunxi-mmc
  3294. 3294 35: 5 0 0 0 GICv2 32 Level ttyS0
  3295. 3295 36: 162252 0 0 0 GICv2 39 Level mv64xxx_i2c
  3296. 3296 37: 7828 0 0 0 GICv2 44 Level eth0
  3297. 3297 40: 0 0 0 0 GICv2 55 Level musb-hdrc.5.auto
  3298. 3298 41: 2 0 0 0 GICv2 56 Level ehci_hcd:usb3
  3299. 3299 42: 394 0 0 0 GICv2 57 Level ohci_hcd:usb5
  3300. 3300 43: 0 0 0 0 GICv2 58 Level xhci-hcd:usb1
  3301. 3301 44: 0 0 0 0 GICv2 60 Level ehci_hcd:usb4
  3302. 3302 45: 0 0 0 0 GICv2 61 Level ohci_hcd:usb6
  3303. 3303 46: 258 0 0 0 GICv2 96 Level 6000000.hdmi, dw-hdmi-cec
  3304. 3304 47: 1564 0 0 0 GICv2 98 Level 6515000.lcd-controller
  3305. 3305 48: 0 0 0 0 sun6i-r-intc 101 Level 7000000.rtc
  3306. 3306 53: 0 0 0 0 sun6i-r-intc 109 Level sunxi-ir
  3307. 3307 54: 2806 0 0 0 GICv2 139 Level mv64xxx_i2c
  3308. 3308 55: 9628 0 0 0 GICv2 47 Level ths
  3309. 3309 120: 0 0 0 0 sun6i-r-intc 96 Level axp806
  3310. 3310 131: 0 0 0 0 axp806 10 Edge axp20x-pek-dbf
  3311. 3311 132: 0 0 0 0 axp806 11 Edge axp20x-pek-dbr
  3312. 3312 153: 0 0 0 0 sunxi_pio_level 20 Level ac200_irq_chip
  3313. 3313 171: 0 0 0 0 sunxi_pio_edge 38 Edge 4020000.mmc cd
  3314. 3314 IPI0: 8813 19435 77331 21780 Rescheduling interrupts
  3315. 3315 IPI1: 2134 6805 2043 1795 Function call interrupts
  3316. 3316 IPI2: 0 0 0 0 CPU stop interrupts
  3317. 3317 IPI3: 0 0 0 0 CPU stop (for crash dump) interrupts
  3318. 3318 IPI4: 0 0 0 0 Timer broadcast interrupts
  3319. 3319 IPI5: 1841 10116 338 319 IRQ work interrupts
  3320. 3320 IPI6: 0 0 0 0 CPU wake-up interrupts
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!