API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jul 22nd, 2018
588
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 103.16 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] B0 0 Booting Linux on physical CPU 0
  2. [ 0.000000] B0 0 Initializing cgroup subsys cpu
  3. [ 0.000000] B0 0 Linux version 3.4.67-g9d55decd72f-dirty (neothefox@Master) (gcc version 4.8 (GCC) ) #13 SMP PREEMPT Fri Jul 20 10:42:02 UTC 2018
  4. [ 0.000000] B0 0 CPU: ARMv7 Processor [412fc0f3] revision 3 (ARMv7), cr=10c5387d
  5. [ 0.000000] B0 0 CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [ 0.000000] B0 0 Machine: UNIVERSAL5410
  7. [ 0.000000] B0 0 S5P/CMA: Reserved 0x00500000@0xbf800000 for 'ion'
  8. [ 0.000000] B0 0 S5P/CMA: Reserved 0x00100000@0xbf700000 for 'drm_mfc_sh'
  9. [ 0.000000] B0 0 S5P/CMA: Reserved 0x00800000@0xbef00000 for 'drm_g2d_wfd'
  10. [ 0.000000] B0 0 S5P/CMA: Reserved 0x00002000@0xbeefe000 for 'bl_mem'
  11. [ 0.000000] B0 0 S5P/CMA: Reserved 0x00400000@0xb4000000 for 'drm_sectbl'
  12. [ 0.000000] B0 0 S5P/CMA: Reserved 0x00100000@0xb4400000 for 'drm_mfc_fw'
  13. [ 0.000000] B0 0 S5P/CMA: Reserved 0x01000000@0xb4500000 for 'drm_mfc_input'
  14. [ 0.000000] B0 0 S5P/CMA: Reserved 0x03b00000@0xb5500000 for 'drm_mfc_output'
  15. [ 0.000000] B0 0 S5P/CMA: Reserved 0x03000000@0xb9000000 for 'drm_fimd_video'
  16. [ 0.000000] B0 0 Initialized persistent memory from 60000000-601fffff
  17. [ 0.000000] B0 0 bootloader framebuffer start address not set
  18. [ 0.000000] B0 0 Memory policy: ECC disabled, Data cache writealloc
  19. [ 0.000000] B0 0 CPU EXYNOS5410 (id 0xe5410023)
  20. [ 0.000000] B0 0 exynos5_init_clocks: initializing clocks
  21. [ 0.000000] B0 0 S3C24XX Clocks, Copyright 2004 Simtec Electronics
  22. [ 0.000000] B0 0 clkout: bad source 0
  23. [ 0.000000] B0 0 ___exynos5_clk_ip_gscl0_ctrl: clk name: gscl_flite0___
  24. [ 0.000000] B0 0 ___exynos5_clk_ip_gscl0_ctrl: clk name: gscl_flite1___
  25. [ 0.000000] B0 0 ___exynos5_clk_ip_gscl0_ctrl: clk name: gscl_flite2___
  26. [ 0.000000] B0 0 exynos5410_setup_clocks: registering clocks
  27. [ 0.000000] B0 0 exynos5410_setup_clocks: xtal is 24000000
  28. [ 0.000000] B0 0 EXYNOS5: EAGLECLK=800000000, KFCCLK=600000000, CDREX=800000000
  29. [ 0.000000] B0 0 mout_apll: source is fout_apll (1), rate is 800000000
  30. [ 0.000000] B0 0 mout_mpll: source is fout_mpll (1), rate is 532000000
  31. [ 0.000000] B0 0 mout_epll: source is fout_epll (1), rate is 400000000
  32. [ 0.000000] B0 0 mout_bpll: source is fout_bpll (1), rate is 800000000
  33. [ 0.000000] B0 0 mout_cpll: source is fout_cpll (1), rate is 640000000
  34. [ 0.000000] B0 0 mout_kpll: source is fout_kpll (1), rate is 600000000
  35. [ 0.000000] B0 0 mout_ipll: source is fout_ipll (1), rate is 432000000
  36. [ 0.000000] B0 0 aclk_333_432_isp: source is ext_xtal (0), rate is 24000000
  37. [ 0.000000] B0 0 aclk_333_432_gscl: source is ext_xtal (0), rate is 24000000
  38. [ 0.000000] B0 0 vpll_src: source is ext_xtal (0), rate is 24000000
  39. [ 0.000000] B0 0 mout_vpll: source is fout_vpll (1), rate is 350000000
  40. [ 0.000000] B0 0 mout_mpll_user: source is mout_mpll (1), rate is 532000000
  41. [ 0.000000] B0 0 mout_bpll_user: source is mout_bpll (1), rate is 800000000
  42. [ 0.000000] B0 0 mout_mpll_bpll: source is mout_mpll_user (0), rate is 532000000
  43. [ 0.000000] B0 0 mout_dpll: source is fout_dpll (1), rate is 600000000
  44. [ 0.000000] B0 0 aclk_400: source is mout_mpll_user (0), rate is 177333333
  45. [ 0.000000] B0 0 aclk_400_isp_pre: source is mout_mpll_user (0), rate is 66500000
  46. [ 0.000000] B0 0 aclk_400_isp: source is ext_xtal (0), rate is 24000000
  47. [ 0.000000] B0 0 aclk_266_isp: source is ext_xtal (0), rate is 24000000
  48. [ 0.000000] B0 0 aclk_200: source is mout_mpll_user (0), rate is 66500000
  49. [ 0.000000] B0 0 aclk_200_disp1: source is aclk_200 (1), rate is 66500000
  50. [ 0.000000] B0 0 aclk_166: source is mout_cpll (0), rate is 160000000
  51. [ 0.000000] B0 0 mout_cpu: source is mout_apll (0), rate is 800000000
  52. [ 0.000000] B0 0 mout_cpu_kfc: source is mout_kpll (0), rate is 600000000
  53. [ 0.000000] B0 0 sclk_mmc0: source is mout_mpll_bpll (6), rate is 266000000
  54. [ 0.000000] B0 0 sclk_mmc1: source is mout_mpll_bpll (6), rate is 532000000
  55. [ 0.000000] B0 0 sclk_mmc2: source is mout_mpll_bpll (6), rate is 266000000
  56. [ 0.000000] B0 0 sclk_pwm_isp: source is ext_xtal (0), rate is 24000000
  57. [ 0.000000] B0 0 sclk_uart_isp: source is ext_xtal (0), rate is 24000000
  58. [ 0.000000] B0 0 sclk_spi1_isp: source is ext_xtal (0), rate is 24000000
  59. [ 0.000000] B0 0 sclk_spi0_isp: source is ext_xtal (0), rate is 24000000
  60. [ 0.000000] B0 0 sclk_mout_isp_sensor: source is mout_ipll (0), rate is 432000000
  61. [ 0.000000] B0 0 sclk_audio: source is ext_xtal (1), rate is 24000000
  62. [ 0.000000] B0 0 mout_g3d: source is mout_cpll (0), rate is 640000000
  63. [ 0.000000] B0 0 sclk_g3d_core_sub: source is ext_xtal (0), rate is 24000000
  64. [ 0.000000] B0 0 sclk_g3d_hydra_sub: source is ext_xtal (0), rate is 24000000
  65. [ 0.000000] B0 0 clkout: bad source 0
  66. [ 0.000000] B0 0 aclk_300_disp1: source is dout_aclk_300_disp1 (1), rate is 200000000
  67. [ 0.000000] B0 0 uclk1: source is mout_cpll (9), rate is 64000000
  68. [ 0.000000] B0 0 uclk1: source is mout_cpll (9), rate is 64000000
  69. [ 0.000000] B0 0 uclk1: source is mout_cpll (9), rate is 64000000
  70. [ 0.000000] B0 0 uclk1: source is mout_cpll (9), rate is 64000000
  71. [ 0.000000] B0 0 sclk_fimd: source is mout_mpll_bpll (6), rate is 133000000
  72. [ 0.000000] B0 0 sclk_mdnie: source is mout_mpll_bpll (6), rate is 133000000
  73. [ 0.000000] B0 0 (sec_debug_set_upload_magic) 66262564
  74. [ 0.000000] B0 0 (sec_debug_set_upload_cause) cafebabe
  75. [ 0.000000] B0 0 On node 0 totalpages: 523520
  76. [ 0.000000] B0 0 free_area_init_node: node 0, pgdat c0bc9d40, node_mem_map c0c0e000
  77. [ 0.000000] B0 0 Normal zone: 1404 pages used for memmap
  78. [ 0.000000] B0 0 Normal zone: 0 pages reserved
  79. [ 0.000000] B0 0 Normal zone: 158340 pages, LIFO batch:31
  80. [ 0.000000] B0 0 HighMem zone: 3198 pages used for memmap
  81. [ 0.000000] B0 0 HighMem zone: 360578 pages, LIFO batch:31
  82. [ 0.000000] B0 0 sec_debug_magic_init: success reserving magic code area
  83. [ 0.000000] B0 0 PERCPU: Embedded 5 pages/cpu @c1e1d000 s7936 r0 d12544 u32768
  84. [ 0.000000] B0 0 pcpu-alloc: s7936 r0 d12544 u32768 alloc=8*4096
  85. [ 0.000000] B0 0 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  86. [ 0.000000] B0 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518918
  87. [ 0.000000] B0 0 Kernel command line: console=ttySAC2,115200n8 vmalloc=512M androidboot.console=ttySAC2 androidboot.hardware=universal5410 enforcing=0 androidboot.selinux=permissive console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 sec_avc_log=0x40000@0x46402000 s3cfb.bootloaderfb=0x67000000 lcdtype=4358215 consoleblank=0 lpj=3977216 vmalloc=384m oops=panic pmic_info=51 cordon=8928d6adf58b6704529acfb506541797 connie=GT-I9500_OPEN_EUR_34ddceaf8b5c2d5977839ea4367b23a3 androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=I9500XXUFNB3 androidboot.selinux=enforcing androidboot.warranty_bit=1 androidboot.sec_atd.tty=/dev/ttySAC2 androidboot.serialno=4d0050bd007550eb snd_soc_core.pmdown_time=1000
  88. [ 0.000000] B0 0 sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:5b0e7 sec_log_buf:f7200000 sec_log_size:2097152
  89. [ 0.000000] B0 0 sec_getlog_supply_kloginfo: 0xc6000000
  90. [ 0.000000] B0 0 sec_avc_log_setup: *sec_avc_log_ptr:ae9 sec_avc_log_buf:c6402000 sec_log_size:0x40000
  91. [ 0.000000] B0 0 ../../../../../../kernel/samsung/exynos5410/drivers/misc/max77803-muic.c get_if_pmic_inifo: switch_sel: 3 if_pmic_rev:3
  92. [ 0.000000] B0 0 PID hash table entries: 4096 (order: 2, 16384 bytes)
  93. [ 0.000000] B0 0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  94. [ 0.000000] B0 0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  95. [ 0.000000] B0 0 Memory: 2045MB = 2045MB total
  96. [ 0.000000] B0 0 Memory: 1911912k/1911912k available, 182168k reserved, 1309688K highmem
  97. [ 0.000000] B0 0 Virtual kernel memory layout:
  98. [ 0.000000] B0 0 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  99. [ 0.000000] B0 0 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  100. [ 0.000000] B0 0 vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
  101. [ 0.000000] B0 0 lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
  102. [ 0.000000] B0 0 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  103. [ 0.000000] B0 0 .text : 0xc0008000 - 0xc09d4000 (10032 kB)
  104. [ 0.000000] B0 0 .init : 0xc09d4000 - 0xc0a14f00 ( 260 kB)
  105. [ 0.000000] B0 0 .data : 0xc0a16000 - 0xc0bcab20 (1747 kB)
  106. [ 0.000000] B0 0 .bss : 0xc0bcab44 - 0xc0c0d738 ( 267 kB)
  107. [ 0.000000] B0 0 SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  108. [ 0.000000] B0 0 Preemptible hierarchical RCU implementation.
  109. [ 0.000000] B0 0 NR_IRQS:855
  110. [ 0.000000] B0 0 sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  111. [ 0.000000] B0 0 Console: colour dummy device 80x30
  112. [ 0.000163] B0 0 Calibrating delay loop (skipped) preset value.. 1590.88 BogoMIPS (lpj=3977216)
  113. [ 0.000233] B0 0 pid_max: default: 32768 minimum: 301
  114. [ 0.000435] B0 0 Security Framework initialized
  115. [ 0.000477] B0 0 SELinux: Initializing.
  116. [ 0.000570] B0 0 SELinux: Starting in permissive mode
  117. [ 0.000672] B0 0 Mount-cache hash table entries: 512
  118. [ 0.001681] B0 0 Initializing cgroup subsys debug
  119. [ 0.001724] B0 0 Initializing cgroup subsys cpuacct
  120. [ 0.001766] B0 0 Initializing cgroup subsys devices
  121. [ 0.001806] B0 0 Initializing cgroup subsys freezer
  122. [ 0.001846] B0 0 Initializing cgroup subsys net_cls
  123. [ 0.001887] B0 0 Initializing cgroup subsys blkio
  124. [ 0.001938] B0 0 Initializing cgroup subsys perf_event
  125. [ 0.001994] B0 0 Initializing cgroup subsys net_prio
  126. [ 0.002040] B0 0 Initializing cgroup subsys bfqio
  127. [ 0.002110] B0 0 CPU: Testing write buffer coherency: ok
  128. [ 0.002295] B0 1 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  129. [ 0.002395] B0 1 hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
  130. [ 0.002506] B0 1 Setting up static identity map for 0x4071c000 - 0x4071c058
  131. [ 0.043537] B1 0 CPU1: Booted secondary processor
  132. [ 0.043602] B1 0 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  133. [ 0.063531] B2 0 CPU2: Booted secondary processor
  134. [ 0.063588] B2 0 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  135. [ 0.083533] B3 0 CPU3: Booted secondary processor
  136. [ 0.083594] B3 0 CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  137. [ 0.083689] B0 1 Brought up 4 CPUs
  138. [ 0.083730] B0 1 SMP: Total of 4 processors activated (6363.54 BogoMIPS).
  139. [ 0.084554] B0 1 devtmpfs: initialized
  140. [ 0.103033] B0 1 VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
  141. [ 0.103343] B0 1 gpiochip_add: registered GPIOs 0 to 4 on device: GPJ0
  142. [ 0.103398] B0 1 gpiochip_add: registered GPIOs 6 to 13 on device: GPJ1
  143. [ 0.103450] B0 1 gpiochip_add: registered GPIOs 15 to 22 on device: GPJ2
  144. [ 0.103501] B0 1 gpiochip_add: registered GPIOs 24 to 31 on device: GPJ3
  145. [ 0.103553] B0 1 gpiochip_add: registered GPIOs 33 to 34 on device: GPJ4
  146. [ 0.103606] B0 1 gpiochip_add: registered GPIOs 36 to 43 on device: GPK0
  147. [ 0.103666] B0 1 gpiochip_add: registered GPIOs 45 to 52 on device: GPK1
  148. [ 0.103718] B0 1 gpiochip_add: registered GPIOs 54 to 61 on device: GPK2
  149. [ 0.103771] B0 1 gpiochip_add: registered GPIOs 63 to 69 on device: GPK3
  150. [ 0.103840] B0 1 gpiochip_add: registered GPIOs 71 to 78 on device: GPA0
  151. [ 0.103892] B0 1 gpiochip_add: registered GPIOs 80 to 85 on device: GPA1
  152. [ 0.103945] B0 1 gpiochip_add: registered GPIOs 87 to 94 on device: GPA2
  153. [ 0.104001] B0 1 gpiochip_add: registered GPIOs 96 to 100 on device: GPB0
  154. [ 0.104054] B0 1 gpiochip_add: registered GPIOs 102 to 106 on device: GPB1
  155. [ 0.104107] B0 1 gpiochip_add: registered GPIOs 108 to 111 on device: GPB2
  156. [ 0.104163] B0 1 gpiochip_add: registered GPIOs 113 to 116 on device: GPB3
  157. [ 0.104215] B0 1 gpio: GPC0 has missing PM functions
  158. [ 0.104256] B0 1 gpiochip_add: registered GPIOs 118 to 124 on device: GPC0
  159. [ 0.104312] B0 1 gpio: GPC3 has missing PM functions
  160. [ 0.104354] B0 1 gpiochip_add: registered GPIOs 126 to 129 on device: GPC3
  161. [ 0.104406] B0 1 gpiochip_add: registered GPIOs 131 to 137 on device: GPC1
  162. [ 0.104463] B0 1 gpiochip_add: registered GPIOs 139 to 145 on device: GPC2
  163. [ 0.104516] B0 1 gpiochip_add: registered GPIOs 147 to 148 on device: GPM5
  164. [ 0.104568] B0 1 gpiochip_add: registered GPIOs 150 to 157 on device: GPD1
  165. [ 0.104624] B0 1 gpiochip_add: registered GPIOs 159 to 166 on device: GPE0
  166. [ 0.104678] B0 1 gpiochip_add: registered GPIOs 168 to 169 on device: GPE1
  167. [ 0.104731] B0 1 gpiochip_add: registered GPIOs 171 to 176 on device: GPF0
  168. [ 0.104786] B0 1 gpiochip_add: registered GPIOs 178 to 185 on device: GPF1
  169. [ 0.104843] B0 1 gpiochip_add: registered GPIOs 187 to 194 on device: GPG0
  170. [ 0.104894] B0 1 gpiochip_add: registered GPIOs 196 to 203 on device: GPG1
  171. [ 0.104950] B0 1 gpiochip_add: registered GPIOs 205 to 206 on device: GPG2
  172. [ 0.105004] B0 1 gpiochip_add: registered GPIOs 208 to 211 on device: GPH0
  173. [ 0.105056] B0 1 gpiochip_add: registered GPIOs 213 to 220 on device: GPH1
  174. [ 0.105114] B0 1 gpiochip_add: registered GPIOs 222 to 229 on device: GPM7
  175. [ 0.105167] B0 1 gpiochip_add: registered GPIOs 231 to 236 on device: GPY0
  176. [ 0.105219] B0 1 gpiochip_add: registered GPIOs 238 to 241 on device: GPY1
  177. [ 0.105275] B0 1 gpiochip_add: registered GPIOs 243 to 248 on device: GPY2
  178. [ 0.105329] B0 1 gpiochip_add: registered GPIOs 250 to 257 on device: GPY3
  179. [ 0.105382] B0 1 gpiochip_add: registered GPIOs 259 to 266 on device: GPY4
  180. [ 0.105437] B0 1 gpiochip_add: registered GPIOs 268 to 275 on device: GPY5
  181. [ 0.105493] B0 1 gpiochip_add: registered GPIOs 277 to 284 on device: GPY6
  182. [ 0.105544] B0 1 gpiochip_add: registered GPIOs 286 to 293 on device: GPY7
  183. [ 0.105600] B0 1 gpiochip_add: registered GPIOs 295 to 302 on device: GPX0
  184. [ 0.105655] B0 1 gpiochip_add: registered GPIOs 304 to 311 on device: GPX1
  185. [ 0.105707] B0 1 gpiochip_add: registered GPIOs 313 to 320 on device: GPX2
  186. [ 0.105763] B0 1 gpiochip_add: registered GPIOs 322 to 329 on device: GPX3
  187. [ 0.105823] B0 1 gpiochip_add: registered GPIOs 331 to 338 on device: GPV0
  188. [ 0.105875] B0 1 gpiochip_add: registered GPIOs 340 to 347 on device: GPV1
  189. [ 0.105932] B0 1 gpiochip_add: registered GPIOs 349 to 356 on device: GPV2
  190. [ 0.105985] B0 1 gpiochip_add: registered GPIOs 358 to 365 on device: GPV3
  191. [ 0.106038] B0 1 gpiochip_add: registered GPIOs 367 to 368 on device: GPV4
  192. [ 0.106097] B0 1 gpio: GPZ has no PM function
  193. [ 0.106137] B0 1 gpiochip_add: registered GPIOs 370 to 376 on device: GPZ
  194. [ 0.106433] B0 1 dummy:
  195. [ 0.106718] B0 1 NET: Registered protocol family 16
  196. [ 0.108756] B0 1 Last reset was reset (RST_STAT=0x800)
  197. [ 0.111273] B0 1 [GPIO_DVS] secgpio_dvs_probe has been created!!!
  198. [ 0.111440] B0 1 [GPIO_DVS] secgpio_dvs_init has been initialized!!!
  199. [ 0.113516] B0 1 usb: universal5410_usbgadget_init: default luns=1, new luns=1
  200. [ 0.114051] B0 1 panel I
  201. [ 0.114389] B0 1 bootloader fb located at 0- 7E8FFF
  202. [ 0.114446] B0 1 synaptics_verify_panel_revision: panel_revision: 8, system_rev: 10, lcdtype: 0x428047, touch_type: 8, el_type: M4, h_sync: OK, ddi_type: SDC
  203. [ 0.114547] B0 1 synaptics_tsp_init touch : 526
  204. [ 0.114596] B0 1 Registered chained gpio int handler for interrupt 77.
  205. [ 0.114673] B0 1 Registered interrupt support for gpio group 29.
  206. [ 0.115620] B0 1 sec_config_gpio_table: Revision=a
  207. [ 0.115825] B0 1 gpio_init_done
  208. [ 0.115856] B0 1 [GPIO_DVS][check_gpio_status] state : init
  209. [ 0.116598] B0 1 [GPIO_DVS][check_gpio_status] --
  210. [ 0.118388] B0 1 [exynos5_universal5410_fpga_init] initialization start!
  211. [ 0.118442] B0 1 [exynos5_universal5410_fpga_init] SYSTEM REVISION is bigger than 5
  212. [ 0.118499] B0 1 [exynos5_universal5410_fpga_init] Change the Barcode I2C line
  213. [ 0.118558] B0 1 [exynos5_universal5410_fpga_init] SYSTEM REVISION : 10
  214. [ 0.118607] B0 1 [exynos5_universal5410_fpga_init] BARCODE SCL : 217
  215. [ 0.118657] B0 1 [exynos5_universal5410_fpga_init] BARCODE SDA : 218
  216. [ 0.118798] B0 1 irda_device_init called!
  217. [ 0.118841] B0 1 irda_device_init complete
  218. [ 0.118876] B0 1 brcm_wlan_init: start
  219. [ 0.118954] B0 1 brcm_init_wlan_mem: WIFI MEM Allocated
  220. [ 0.119270] B0 1 system rev = 10
  221. [ 0.119364] B0 1 sii8240_cfg_gpio()
  222. [ 0.119409] B0 1 Registered chained gpio int handler for interrupt 78.
  223. [ 0.119483] B0 1 Registered interrupt support for gpio group 1.
  224. [ 0.119746] B0 1 persistent_ram: found existing buffer, size 5253, start 5253
  225. [ 0.135928] B0 1 console [ram0] enabled
  226. [ 0.136329] B0 1 hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  227. [ 0.136396] B0 1 hw-breakpoint: maximum watchpoint size is 8 bytes.
  228. [ 0.136601] B0 1 CCI is not supportedS3C Power Management, Copyright 2004 Simtec Electronics
  229. [ 0.137986] B0 1 Failed to get (null) clock
  230. [ 0.138173] B0 1 Failed to get (null) clock
  231. [ 0.138638] B0 1 ___exynos5_clk_ip_gscl0_ctrl: clk name: gscl_flite2___
  232. [ 0.138701] B0 1 ___exynos5_clk_ip_gscl0_ctrl: clk name: gscl_flite2___
  233. [ 0.138770] B0 1 ___exynos5_clk_ip_gscl0_ctrl: clk name: gscl_flite0___
  234. [ 0.138825] B0 1 ___exynos5_clk_ip_gscl0_ctrl: clk name: gscl_flite0___
  235. [ 0.139043] B0 1 EXYNOS5410 PMU Initialize
  236. [ 0.139293] B0 1 EXYNOS: Initializing architecture
  237. [ 0.139868] B0 1 s3c24xx-pwm s3c24xx-pwm.0: tin at 66500000, tdiv at 66500000, tin=divclk, base 0
  238. [ 0.140232] B0 1 Exynos5410 : Lot ID is N61FD[Non Special]
  239. [ 0.140276] B0 1 Exynos5410 ASV : Use Fusing Speed Group 7
  240. [ 0.140319] B0 1 Exynos5410 ASV : invalid IDS value
  241. [ 0.140362] B0 1 EXYNOS5410 ASV : N61FD IDS : 0 HPM : 0
  242. [ 0.140421] B0 1 VDD_ARM ASV group is 7
  243. [ 0.140457] B0 1 VDD_KFC ASV group is 7
  244. [ 0.140493] B0 1 VDD_INT_MIF_L0 ASV group is 7
  245. [ 0.140534] B0 1 VDD_MIF ASV group is 7
  246. [ 0.140571] B0 1 VDD_G3D ASV group is 7
  247. [ 0.140607] B0 1 VDD_INT_MIF_L1 ASV group is 7
  248. [ 0.140646] B0 1 VDD_INT_MIF_L2 ASV group is 7
  249. [ 0.140685] B0 1 VDD_INT_MIF_L3 ASV group is 7
  250. [ 0.141954] B0 1 Exynos Power mode List
  251. [ 0.141992] B0 1 NAME CPU MIF INT CPU0 CPU1 CPU2 CPU3
  252. [ 0.142035] B0 1 init 0 0 0 1 1 1 1
  253. [ 0.142070] B0 1 quad 1600000 800000 400000 1 1 1 1
  254. [ 0.142111] B0 1 quad_io 1800000 800000 400000 1 1 0 0
  255. [ 0.142153] B0 1 quad_mem 1800000 800000 400000 1 1 0 0
  256. [ 0.142204] B0 1 exynos_interface_init: failed to create sysfs interface
  257. [ 0.150981] B0 1 bio: create slab <bio-0> at 0
  258. [ 0.151441] B0 1 DC_5V: 5000 mV
  259. [ 0.152399] B0 1 SCSI subsystem initialized
  260. [ 0.157682] B0 1 usbcore: registered new interface driver usbfs
  261. [ 0.157791] B0 1 usbcore: registered new interface driver hub
  262. [ 0.157933] B0 1 usbcore: registered new device driver usb
  263. [ 0.158285] B0 1 i2c-gpio i2c-gpio.18: using pins 50 (SDA) and 49 (SCL)
  264. [ 0.158505] B0 1 i2c-gpio i2c-gpio.8: using pins 43 (SDA) and 42 (SCL)
  265. [ 0.158739] B0 1 i2c-gpio i2c-gpio.21: using pins 192 (SDA) and 191 (SCL)
  266. [ 0.158953] B0 1 i2c-gpio i2c-gpio.22: using pins 218 (SDA) and 217 (SCL)
  267. [ 0.159743] B0 1 max77803_i2c_probe: device found: rev.0x3, ver.0x0
  268. [ 0.241268] B0 1 max77803-safeout max77803-safeout: max77803_pmic_probe
  269. [ 0.241322] B0 1 [../../../../../../kernel/samsung/exynos5410/drivers/regulator/max77803.c:465] pdata->num_regulators:3
  270. [ 0.241399] B0 1 [../../../../../../kernel/samsung/exynos5410/drivers/regulator/max77803.c:471] for in pdata->num_regulators:3
  271. [ 0.241548] B0 1 regulator regulator.2: func:max77803_reg_enable
  272. [ 0.241597] B0 1 regulator regulator.2: func:max77803_get_rid
  273. [ 0.241645] B0 1 regulator regulator.2: func:max77803_get_enable_register
  274. [ 0.242709] B0 1 regulator regulator.2: func:max77803_get_voltage
  275. [ 0.242758] B0 1 regulator regulator.2: func:max77803_get_rid
  276. [ 0.242803] B0 1 regulator regulator.2: func:max77803_get_voltage_register
  277. [ 0.243423] B0 1 regulator regulator.2: func:max77803_get_rid
  278. [ 0.243469] B0 1 regulator regulator.2: func:max77803_list_voltage_safeout
  279. [ 0.243521] B0 1 safeout1 range: at 4900 mV
  280. [ 0.243558] B0 1 regulator regulator.2: func:max77803_get_voltage
  281. [ 0.243606] B0 1 regulator regulator.2: func:max77803_get_rid
  282. [ 0.243650] B0 1 regulator regulator.2: func:max77803_get_voltage_register
  283. [ 0.244273] B0 1 regulator regulator.2: func:max77803_get_rid
  284. [ 0.244318] B0 1 regulator regulator.2: func:max77803_list_voltage_safeout
  285. [ 0.244431] B0 1 [../../../../../../kernel/samsung/exynos5410/drivers/regulator/max77803.c:471] for in pdata->num_regulators:3
  286. [ 0.244587] B0 1 regulator regulator.3: func:max77803_get_voltage
  287. [ 0.244635] B0 1 regulator regulator.3: func:max77803_get_rid
  288. [ 0.244680] B0 1 regulator regulator.3: func:max77803_get_voltage_register
  289. [ 0.245301] B0 1 regulator regulator.3: func:max77803_get_rid
  290. [ 0.245345] B0 1 regulator regulator.3: func:max77803_list_voltage_safeout
  291. [ 0.245398] B0 1 safeout2 range: at 4900 mV
  292. [ 0.245436] B0 1 regulator regulator.3: func:max77803_get_voltage
  293. [ 0.245482] B0 1 regulator regulator.3: func:max77803_get_rid
  294. [ 0.245526] B0 1 regulator regulator.3: func:max77803_get_voltage_register
  295. [ 0.246147] B0 1 regulator regulator.3: func:max77803_get_rid
  296. [ 0.246192] B0 1 regulator regulator.3: func:max77803_list_voltage_safeout
  297. [ 0.246300] B0 1 [../../../../../../kernel/samsung/exynos5410/drivers/regulator/max77803.c:471] for in pdata->num_regulators:3
  298. [ 0.246447] B0 1 regulator regulator.4: func:max77803_reg_enable
  299. [ 0.246495] B0 1 regulator regulator.4: func:max77803_get_rid
  300. [ 0.246541] B0 1 regulator regulator.4: func:max77803_get_enable_register
  301. [ 0.247604] B0 1 regulator regulator.4: func:max77803_get_voltage
  302. [ 0.247654] B0 1 regulator regulator.4: func:max77803_get_rid
  303. [ 0.247698] B0 1 regulator regulator.4: func:max77803_get_voltage_register
  304. [ 0.248318] B0 1 regulator regulator.4: func:max77803_get_rid
  305. [ 0.248363] B0 1 regulator regulator.4: func:max77803_list_voltage
  306. [ 0.248411] B0 1 CHARGER: 60 <--> 2580 mA at 460 mA
  307. [ 0.248633] B0 1 i2c-gpio i2c-gpio.17: using pins 55 (SDA) and 54 (SCL)
  308. [ 0.249121] B0 1 i2c-gpio i2c-gpio.15: using pins 68 (SDA) and 67 (SCL)
  309. [ 0.249437] B0 1 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
  310. [ 0.249488] B0 1 s3c-i2c s3c2440-i2c.0: slave address 0x10
  311. [ 0.249532] B0 1 s3c-i2c s3c2440-i2c.0: bus frequency set to 377 KHz
  312. [ 0.249742] B0 1 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
  313. [ 0.249791] B0 1 s3c-i2c s3c2440-i2c.1: slave address 0x10
  314. [ 0.249835] B0 1 s3c-i2c s3c2440-i2c.1: bus frequency set to 377 KHz
  315. [ 0.250116] B0 1 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
  316. [ 0.250165] B0 1 s3c-i2c s3c2440-i2c.3: slave address 0x10
  317. [ 0.250210] B0 1 s3c-i2c s3c2440-i2c.3: bus frequency set to 377 KHz
  318. [ 0.250544] B0 1 exynos5-i2c exynos5-hs-i2c.0: i2c-4: Exynos5 HS-I2C adapter
  319. [ 0.254897] B0 1 vdd_mif range: 600 <--> 1300 mV at 1050 mV
  320. [ 0.255423] B0 1 vdd_arm range: 600 <--> 1500 mV at 1000 mV
  321. [ 0.255960] B0 1 vdd_int range: 600 <--> 1400 mV at 1100 mV
  322. [ 0.256481] B0 1 vdd_g3d range: 600 <--> 1400 mV at 1000 mV
  323. [ 0.257006] B0 1 vdd_mem2 range: 600 <--> 1400 mV at 1200 mV
  324. [ 0.257527] B0 1 vdd_kfc range: 600 <--> 1500 mV at 1000 mV
  325. [ 0.258050] B0 1 vcc_1.8v_ap range: 1800 mV
  326. [ 0.258579] B0 1 vxpll_1.8v_ap range: 1800 mV
  327. [ 0.259094] B0 1 vmipi_1.0v_ap range: 1000 mV
  328. [ 0.259601] B0 1 vmipi_1.8v_ap range: 1800 mV
  329. [ 0.260121] B0 1 vabb1_1.8v_ap range: 1800 mV
  330. [ 0.260634] B0 1 vuotg_3.0v_ap range: 3000 mV
  331. [ 0.261144] B0 1 vdd_ldo10 range: 1800 mV
  332. [ 0.261648] B0 1 vhsic_1.0v_ap range: 1000 mV
  333. [ 0.262164] B0 1 vdd_ldo12 range: 1800 mV
  334. [ 0.262572] B0 1 vdd_ldo13 range: 1800 <--> 2800 mV at 2800 mV
  335. [ 0.262987] B0 1 vcc_3.0v_motor range: 3000 mV
  336. [ 0.263390] B0 1 vcc_3.0v_lcd range: 3000 mV
  337. [ 0.263903] B0 1 vcc_2.8v_ap range: 2800 mV
  338. [ 0.264299] B0 1 tsp_avdd range: 3300 mV
  339. [ 0.264687] B0 1 vt_cam_1.8v range: 1800 mV
  340. [ 0.265083] B0 1 cam_isp_sensor_io_1.8v range: 1800 mV
  341. [ 0.265480] B0 1 cam_sensor_core_1.2v range: 1050 mV
  342. [ 0.265992] B0 1 v2mic_1.1v range: 1100 mV
  343. [ 0.266397] B0 1 cam_sensor_a2.8v_pm range: 2800 mV
  344. [ 0.266793] B0 1 touch_1.8v_s range: 1800 mV
  345. [ 0.267196] B0 1 cam_af_2.8v_pm range: 2800 mV
  346. [ 0.267609] B0 1 vcc_2.8v_lcd: 3000 mV
  347. [ 0.268117] B0 1 gesture_sensor: 1800 mV
  348. [ 0.268512] B0 1 touchkey: 1800 mV
  349. [ 0.268903] B0 1 tsp_vdd range: 1800 mV
  350. [ 0.269297] B0 1 vcc_1.8v_mhl: 1800 mV
  351. [ 0.269704] B0 1 vcc_3.3v_mhl: 3300 mV
  352. [ 0.270095] B0 1 vsil_1.2a: 1200 mV
  353. [ 0.270488] B0 1 uv_vcc_1.8v: 1800 mV
  354. [ 0.270876] B0 1 touchkey_led: 2500 <--> 3300 mV at 3000 mV
  355. [ 0.271185] B0 1 exynos5-i2c exynos5-hs-i2c.1: i2c-5: Exynos5 HS-I2C adapter
  356. [ 0.271283] B0 1 exynos5-i2c exynos5-hs-i2c.2: no platform data
  357. [ 0.271416] B0 1 exynos5-i2c: probe of exynos5-hs-i2c.2 failed with error -22
  358. [ 0.271697] B0 1 exynos5-i2c exynos5-hs-i2c.3: i2c-7: Exynos5 HS-I2C adapter
  359. [ 0.271791] B0 1 Linux media interface: v0.10
  360. [ 0.271865] B0 1 Linux video capture interface: v2.00
  361. [ 0.276378] B0 1 [SENSORS CORE] sensors_class_init
  362. [ 0.276565] B0 1 Advanced Linux Sound Architecture Driver Version 1.0.25.
  363. [ 0.277045] B0 1 Bluetooth: Core ver 2.16
  364. [ 0.277115] B0 1 NET: Registered protocol family 31
  365. [ 0.277155] B0 1 Bluetooth: HCI device and connection manager initialized
  366. [ 0.277207] B0 1 Bluetooth: HCI socket layer initialized
  367. [ 0.277251] B0 1 Bluetooth: L2CAP socket layer initialized
  368. [ 0.277319] B0 1 Bluetooth: SCO socket layer initialized
  369. [ 0.277600] B0 24 cfg80211: Calling CRDA to update world regulatory domain
  370. [ 0.278814] B0 1 Switching to clocksource mct-frc
  371. [ 0.290228] B0 1 NET: Registered protocol family 2
  372. [ 0.290469] B0 1 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  373. [ 0.291030] B0 1 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  374. [ 0.293474] B0 1 TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  375. [ 0.294802] B0 1 TCP: Hash tables configured (established 131072 bind 65536)
  376. [ 0.294857] B0 1 TCP: reno registered
  377. [ 0.294896] B0 1 UDP hash table entries: 512 (order: 2, 16384 bytes)
  378. [ 0.294977] B0 1 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  379. [ 0.295300] B0 1 NET: Registered protocol family 1
  380. [ 0.295565] B0 1 Trying to unpack rootfs image as initramfs...
  381. [ 0.326926] B0 1 Freeing initrd memory: 632K
  382. [ 0.328507] B0 1 exynos_init_cpuidle: c2_flag_addr(0xffdff000), c2_flag_phy_addr(0x662fc000)
  383. [ 0.328569] B0 1 ####init
  384. [ 0.329132] B0 1 wake enabled for irq 529
  385. [ 0.329806] B0 1 gps_geofence_wake_init misc register, name gps_geofence_wake, irq 518, host req pin num 301
  386. [ 0.330022] B0 1 gps_host_wake_isr GPS pin level[Low]
  387. [ 0.330265] B0 1 wake enabled for irq 518
  388. [ 0.330432] B0 1 s3c-adc samsung-adc-v5: operating without regulator "vdd" .
  389. [ 0.330636] B0 1 s3c-adc samsung-adc-v5: attached adc driver
  390. [ 0.331110] B0 1 audit: initializing netlink socket (enabled)
  391. [ 0.331936] B0 1 highmem bounce pool size: 64 pages
  392. [ 0.337093] B0 1 exFAT: Core Version 1.2.12
  393. [ 0.337133] B0 1 exFAT: FS Version 1.2.12
  394. [ 0.337402] B0 1 fuse init (API version 7.18)
  395. [ 0.337985] B0 1 msgmni has been set to 1177
  396. [ 0.338064] B0 1 SELinux: Registering netfilter hooks
  397. [ 0.338689] B1 37 alg: No test for cipher_null (cipher_null-generic)
  398. [ 0.338866] B1 38 alg: No test for ecb(cipher_null) (ecb-cipher_null)
  399. [ 0.339089] B1 39 alg: No test for digest_null (digest_null-generic)
  400. [ 0.339240] B1 40 alg: No test for compress_null (compress_null-generic)
  401. [ 0.341786] B1 51 alg: comp: Compression test 1 failed for lzo-generic: output len = 57
  402. [ 0.342104] B1 52 alg: No test for stdrng (krng)
  403. [ 0.342184] B0 1 io scheduler noop registered (default)
  404. [ 0.342256] B0 1 io scheduler cfq registered
  405. [ 0.342406] B0 1 io scheduler bfq registered
  406. [ 0.342443] B0 1 BFQ I/O-scheduler: v7r8
  407. [ 0.345221] B0 1 dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
  408. [ 0.345280] B0 1 dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  409. [ 0.347903] B0 1 dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
  410. [ 0.347961] B0 1 dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
  411. [ 0.348794] B0 1 dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
  412. [ 0.348851] B0 1 dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
  413. [ 0.349408] B0 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  414. [ 0.350453] B0 1 exynos4210-uart.0: ttySAC0 at MMIO 0x12c00000 (irq = 83) is a S3C6400/10
  415. [ 0.350722] B0 1 exynos4210-uart.1: ttySAC1 at MMIO 0x12c10000 (irq = 84) is a S3C6400/10
  416. [ 0.350999] B0 1 exynos4210-uart.2: ttySAC2 at MMIO 0x12c20000 (irq = 85) is a S3C6400/10
  417. [ 0.503023] B0 1 console [ttySAC2] enabled
  418. [ 0.503300] B0 1 exynos4210-uart.3: ttySAC3 at MMIO 0x12c30000 (irq = 86) is a S3C6400/10
  419. [ 0.503743] B0 1 ion_device_add_heap: can not insert multiple heaps with id 1
  420. [ 0.510557] B0 1 ion_device_add_heap: can not insert multiple heaps with id 0
  421. [ 0.518229] B0 1 PVR_K: PVRSRVDriverProbe(pDevice=c0b5ee18)
  422. [ 0.518281] B0 1 PVR_K: SysInitialise: start
  423. [ 0.518756] B0 1 PVR_K: SGX change voltage [0] -> [925000] mV
  424. [ 0.519338] B0 1 PVR_K: G3D DVFS Info: Level:0, Clock:532 MHz, Voltage:1050000 uV
  425. [ 0.519403] B0 1 PVR_K: G3D DVFS Info: Level:1, Clock:480 MHz, Voltage:1012500 uV
  426. [ 0.519464] B0 1 PVR_K: G3D DVFS Info: Level:2, Clock:350 MHz, Voltage:912500 uV
  427. [ 0.519525] B0 1 PVR_K: G3D DVFS Info: Level:3, Clock:266 MHz, Voltage:900000 uV
  428. [ 0.519585] B0 1 PVR_K: G3D DVFS Info: Level:4, Clock:177 MHz, Voltage:900000 uV
  429. [ 0.520044] B0 1 PVR_K: enable_gpu_power off fail with pm_runtime_suspended
  430. [ 0.520109] B0 1 PVR_K: SysInitialise: end
  431. [ 0.547466] B0 1 brd: module loaded
  432. [ 0.551432] B0 1 loop: module loaded
  433. [ 0.551480] B0 1 func:max77803_muic_init
  434. [ 0.551620] B0 1 func:max77803_muic_probe
  435. [ 0.551666] B0 1 max77803-muic max77803-muic: adc:837 chgtype:841, adc1k840
  436. [ 0.551869] B0 1 input: max77803-muic as /devices/platform/i2c-gpio.17/i2c-17/17-0066/max77803-muic/input/input0
  437. [ 0.551950] B0 1 max77803-muic max77803-muic: H/W rev connected UT1 UR2 pin to AP UART
  438. [ 0.552009] B0 1 max77803_muic_probe: switch_sel: 3
  439. [ 0.552156] B0 1 max77803-muic max77803-muic: func:max77803_muic_set_adcdbset value:2
  440. [ 0.552217] B0 1 max77803-muic max77803-muic: max77803_muic_set_adcdbset: ADCDBSET(0x20)
  441. [ 0.553278] B0 1 max77803-muic max77803-muic: func:max77803_muic_irq_init
  442. [ 0.565097] B0 1 max77803-muic max77803-muic: adc:837 chgtype:841 adc1k:840 vbvolt:845
  443. [ 0.565728] B0 1 max77803-muic max77803-muic: max77803_muic_irq_init: reg=7, val=9
  444. [ 0.566354] B0 1 max77803-muic max77803-muic: max77803_muic_irq_init: reg=8, val=11
  445. [ 0.566977] B0 1 max77803-muic max77803-muic: max77803_muic_irq_init: reg=9, val=0
  446. [ 0.567601] B0 1 max77803-muic max77803-muic: max77803_muic_irq_init: reg=1, val=0
  447. [ 0.568224] B0 1 max77803-muic max77803-muic: max77803_muic_irq_init: reg=2, val=0
  448. [ 0.568848] B0 1 max77803-muic max77803-muic: max77803_muic_irq_init: reg=3, val=0
  449. [ 0.570917] B0 1 audience_es325 4-003e: request_firmware
  450. [ 0.576551] B0 1 LDO1: 1200 <--> 1800 mV at 1200 mV
  451. [ 0.584481] B0 1 arizona spi2.0: WM5102 revision C
  452. [ 0.602421] B0 1 MICVDD: 1700 <--> 3300 mV at 3000 mV
  453. [ 0.602783] B0 1 gpiochip_add: registered GPIOs 379 to 383 on device: arizona
  454. [ 0.603192] B0 1 bcm2079x-i2c 3-0077: bcm2079x_probe, probing bcm2079x driver flags = 0
  455. [ 0.603437] B0 1 bcm2079x-i2c 3-0077: requesting IRQ 523 with IRQF_NO_SUSPEND
  456. [ 0.603565] B0 1 bcm2079x-i2c 3-0077: bcm2079x_probe, probing bcm2079x driver exited successfully
  457. [ 0.603966] B0 1 tun: Universal TUN/TAP device driver, 1.6
  458. [ 0.604012] B0 1 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  459. [ 0.604259] B0 1 PPP generic driver version 2.4.2
  460. [ 0.604490] B0 1 PPP BSD Compression module registered
  461. [ 0.604533] B0 1 PPP Deflate Compression module registered
  462. [ 0.605085] B0 1 PPP MPPE Compression module registered
  463. [ 0.605135] B0 1 NET: Registered protocol family 24
  464. [ 0.605262] B0 1 host_notifier host_notifier.0: notifier_probe
  465. [ 0.605556] B0 1 exynos-drd exynos-dwc3.0: Core ID Number: 0x5533
  466. [ 0.605606] B0 1 exynos-drd exynos-dwc3.0: Release Number: 0x200a
  467. [ 0.605722] B0 1 exynos5_usb_get_id_state id value is (255)
  468. [ 0.605767] B0 1 exynos5_usb_vbus_init vbus value is (0)
  469. [ 0.606248] B0 1 exynos-drd exynos-dwc3.1: Core ID Number: 0x5533
  470. [ 0.606299] B0 1 exynos-drd exynos-dwc3.1: Release Number: 0x200a
  471. [ 0.606400] B0 1 exynos-drd exynos-dwc3.1: dummy
  472. [ 0.606592] B0 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  473. [ 0.606647] B0 1 ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
  474. [ 0.606814] B0 1 mif: set_hsic_lpa_states: 373: called(s5p_usb_phy_init+0xf8/0x294):
  475. [ 0.607012] B0 1 s5p-ehci s5p-ehci: S5P EHCI Host Controller
  476. [ 0.607110] B0 1 ../../../../../../kernel/samsung/exynos5410/drivers/usb/core/inode.c: creating file 'devices'
  477. [ 0.607193] B0 1 ../../../../../../kernel/samsung/exynos5410/drivers/usb/core/inode.c: creating file '001'
  478. [ 0.607273] B0 1 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
  479. [ 0.607396] B0 1 s5p-ehci s5p-ehci: irq 103, io mem 0x12110000
  480. [ 0.613988] B0 1 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
  481. [ 0.614166] B0 1 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  482. [ 0.614222] B0 1 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  483. [ 0.614280] B0 1 usb usb1: Product: S5P EHCI Host Controller
  484. [ 0.614325] B0 1 usb usb1: Manufacturer: Linux 3.4.67-g9d55decd72f-dirty ehci_hcd
  485. [ 0.614381] B0 1 usb usb1: SerialNumber: s5p-ehci
  486. [ 0.614894] B0 1 hub 1-0:1.0: usb_probe_interface
  487. [ 0.614936] B0 1 hub 1-0:1.0: usb_probe_interface - got id
  488. [ 0.614984] B0 1 hub 1-0:1.0: USB hub found
  489. [ 0.615031] B0 1 hub 1-0:1.0: 3 ports detected
  490. [ 0.615320] B0 1 ../../../../../../kernel/samsung/exynos5410/drivers/usb/core/inode.c: creating file '001'
  491. [ 0.619552] B0 57 max77803-muic:max77803_muic_dock_detect CONTROL1:0
  492. [ 0.620297] B0 57 max77803-muic:max77803_muic_dock_detect STATUS1:0x3f, 2:0x41
  493. [ 0.620352] B0 57 max77803-muic:max77803_muic_dock_detect adc:1f adcerr:0 chgtyp:1 vb:40 dxovp:0 cable_type:19
  494. [ 0.654234] B0 1 usb: exynos-xhci read original PHYPARAM0 : 0x24d4e6e4
  495. [ 0.654288] B0 1 usb: exynos-xhci modified PHYPARAM0 : 0x24d4e6e4
  496. [ 0.654363] B0 1 exynos-drd exynos-dwc3.0: Core ID Number: 0x5533
  497. [ 0.654412] B0 1 exynos-drd exynos-dwc3.0: Release Number: 0x200a
  498. [ 0.654467] B0 1 exynos-xhci exynos-xhci.0: EXYNOS xHCI Host Controller
  499. [ 0.654530] B0 1 ../../../../../../kernel/samsung/exynos5410/drivers/usb/core/inode.c: creating file '002'
  500. [ 0.654614] B0 1 exynos-xhci exynos-xhci.0: new USB bus registered, assigned bus number 2
  501. [ 0.654857] B0 1 exynos-xhci exynos-xhci.0: irq 104, io mem 0x12000000
  502. [ 0.654980] B0 1 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  503. [ 0.655035] B0 1 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  504. [ 0.655093] B0 1 usb usb2: Product: EXYNOS xHCI Host Controller
  505. [ 0.655139] B0 1 usb usb2: Manufacturer: Linux 3.4.67-g9d55decd72f-dirty xhci_hcd
  506. [ 0.655193] B0 1 usb usb2: SerialNumber: exynos-xhci.0
  507. [ 0.655597] B0 1 xHCI xhci_add_endpoint called for root hub
  508. [ 0.655643] B0 1 xHCI xhci_check_bandwidth called for root hub
  509. [ 0.655787] B0 1 hub 2-0:1.0: usb_probe_interface
  510. [ 0.655829] B0 1 hub 2-0:1.0: usb_probe_interface - got id
  511. [ 0.655879] B0 1 hub 2-0:1.0: USB hub found
  512. [ 0.655928] B0 1 hub 2-0:1.0: 1 port detected
  513. [ 0.656215] B0 1 ../../../../../../kernel/samsung/exynos5410/drivers/usb/core/inode.c: creating file '001'
  514. [ 0.656368] B0 1 exynos-xhci exynos-xhci.0: EXYNOS xHCI Host Controller
  515. [ 0.656428] B0 1 ../../../../../../kernel/samsung/exynos5410/drivers/usb/core/inode.c: creating file '003'
  516. [ 0.656510] B0 1 exynos-xhci exynos-xhci.0: new USB bus registered, assigned bus number 3
  517. [ 0.656664] B0 1 usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
  518. [ 0.656719] B0 1 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  519. [ 0.656777] B0 1 usb usb3: Product: EXYNOS xHCI Host Controller
  520. [ 0.656824] B0 1 usb usb3: Manufacturer: Linux 3.4.67-g9d55decd72f-dirty xhci_hcd
  521. [ 0.656878] B0 1 usb usb3: SerialNumber: exynos-xhci.0
  522. [ 0.657296] B0 1 xHCI xhci_add_endpoint called for root hub
  523. [ 0.657341] B0 1 xHCI xhci_check_bandwidth called for root hub
  524. [ 0.657488] B0 1 hub 3-0:1.0: usb_probe_interface
  525. [ 0.657530] B0 1 hub 3-0:1.0: usb_probe_interface - got id
  526. [ 0.657576] B0 1 hub 3-0:1.0: USB hub found
  527. [ 0.657625] B0 1 hub 3-0:1.0: 1 port detected
  528. [ 0.657906] B0 1 ../../../../../../kernel/samsung/exynos5410/drivers/usb/core/inode.c: creating file '001'
  529. [ 0.658117] B0 1 usbcore: registered new interface driver usblp
  530. [ 0.658166] B0 1 Initializing USB Mass Storage driver...
  531. [ 0.658273] B0 1 usbcore: registered new interface driver usb-storage
  532. [ 0.658321] B0 1 USB Mass Storage support registered.
  533. [ 0.658441] B0 1 usbcore: registered new interface driver usbserial
  534. [ 0.658489] B0 1 usbserial: USB Serial Driver core
  535. [ 0.658556] B0 1 usbcore: registered new interface driver pl2303
  536. [ 0.658628] B0 1 USB Serial support registered for pl2303
  537. [ 0.658851] B0 1 exynos-ss-udc exynos-ss-udc.0: regs e7ad8000, irq 104
  538. [ 0.659265] B0 1 usb: init
  539. [ 0.659441] B0 1 usb: android_probe pdata: e6928bc0
  540. [ 0.659484] B0 1 usb: android_probe nluns=1
  541. [ 0.659741] B0 1 usb: android_bind disconnect
  542. [ 0.659779] B0 1 usb: usb_gadget_disconnect
  543. [ 0.659876] B0 1 file system registered
  544. [ 0.661273] B0 1 usb: mass_storage_function_init pdata->nluns=1, cdfs = 0
  545. [ 0.661331] B0 1 usb: usb_string_id cdev(0xe63c9400)->next_string_id=1
  546. [ 0.661499] B0 1 gadget: Mass Storage Function, version: 2009/09/11
  547. [ 0.661551] B0 1 gadget: Number of LUNs=1
  548. [ 0.661590] B0 1 lun0: LUN: removable file: (no medium)
  549. [ 0.662040] B0 1 usb: usb_string_id cdev(0xe63c9400)->next_string_id=2
  550. [ 0.662093] B0 1 usb: usb_string_id cdev(0xe63c9400)->next_string_id=3
  551. [ 0.662150] B0 1 usb: usb_string_id cdev(0xe63c9400)->next_string_id=4
  552. [ 0.662202] B0 1 usb: composite_bind idVendor=0x0, idProduct=0x0
  553. [ 0.662247] B0 1 usb: composite_bind bcdDevice=0x0
  554. [ 0.662287] B0 1 usb: composite_bind composite_manufacturer=
  555. [ 0.662337] B0 1 gadget: android_usb ready
  556. [ 0.662374] B0 1 exynos-ss-udc exynos-ss-udc.0: bound driver android_usb
  557. [ 0.662762] B0 1 mousedev: PS/2 mouse device common for all mice
  558. [ 0.663057] B0 1 usbcore: registered new interface driver xpad
  559. [ 0.663144] B0 1 usbcore: registered new interface driver usb_acecad
  560. [ 0.663228] B0 1 usbcore: registered new interface driver aiptek
  561. [ 0.663308] B0 1 usbcore: registered new interface driver gtco
  562. [ 0.663387] B0 1 usbcore: registered new interface driver hanwang
  563. [ 0.663466] B0 1 usbcore: registered new interface driver kbtab
  564. [ 0.663557] B0 1 usbcore: registered new interface driver wacom
  565. [ 0.663646] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_probe: DDI Type is SDC[0]
  566. [ 0.663812] B0 1 [TSP] synaptics_power on
  567. [ 0.820300] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_f34_read_version: [IC] [date, revision, version, panel] [06/08, 0xB0, 0x5C, 0x08]
  568. [ 0.821266] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_check_status: Device status[0x81] status.code[1]
  569. [ 0.825401] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_f12_init: 12 num_Rx:28 num_Tx:16, node:192, threshold:30, gloved sensitivity:f9
  570. [ 0.825843] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_glove_mode_enables: [00]: glove disable
  571. [ 0.831574] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_f51_set_init: proximity controls:[0X51]
  572. [ 0.832309] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_f51_set_custom_rezero
  573. [ 0.933964] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_f51_set_enables: disable[0x82]
  574. [ 0.939010] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_query_device: Number of interrupt registers = 1 sum of intr_count = 6
  575. [ 0.940825] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_query_device: F34 : NUM_SOURCE[21] NUM_INT_REG[00] INT_MASK[00]
  576. [ 0.940904] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_query_device: F12 : NUM_SOURCE[01] NUM_INT_REG[00] INT_MASK[04]
  577. [ 0.940984] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_query_device: F51 : NUM_SOURCE[41] NUM_INT_REG[00] INT_MASK[20]
  578. [ 0.941061] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_query_device: Interrupt enable mask 0 = 0x24
  579. [ 0.942277] B0 1 input: sec_touchscreen as /devices/platform/s3c2440-i2c.0/i2c-0/0-0020/input/input1
  580. [ 0.945844] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_f54_set_control: query_base_addr[0x132] control_base_addr[0x10c] data_base_addr[0x100] command_base_addr[0x131]
  581. [ 0.949863] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_fwu_init: [IC] [F01 product info, ID(revision)] [0x0000 0x0000, SY 01(0XB0)]
  582. [ 0.952268] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_fw_update_on_probe: Load firmware : tsp_synaptics/synaptics_b0_5_1.fw
  583. [ 0.952366] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_skip_firmware_update: [FW size. revision, version] [62976, 0xB0/0xB0(BIN/IC), 0x5C/0x5C(BIN/IC)]
  584. [ 0.952469] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_skip_firmware_update: [Panel revision, prog bit] [0x08, 0x00]
  585. [ 0.952548] B0 1 synaptics_rmi4_i2c 0-0020: synaptics_skip_firmware_update: Do not need to update
  586. [ 0.955288] B0 1 s2mps11_rtc_set_time_reg: WUDR RUDR check(0x11) alarm_enable(0x1)
  587. [ 0.955348] B0 1 s2mps11-rtc s2mps11-rtc: s2mps11_rtc_enable_wtsr: enable WTSR
  588. [ 0.955624] B0 1 s2mps11-rtc s2mps11-rtc: s2mps11_rtc_enable_smpl: enable SMPL
  589. [ 0.956019] B0 1 s2mps11_rtc_enable_smpl: WTSR_SMPL(0xc3)
  590. [ 0.957399] B0 1 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  591. [ 0.957707] B0 1 s2mps11_rtc_read_time: 2018/5/29 16:4:23(0)
  592. [ 0.958013] B0 1 s2mps11_rtc_read_alarm: 2018/5/29 15:37:4(2)
  593. [ 0.959458] B0 1 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  594. [ 0.959764] B0 1 s2mps11_rtc_read_time: 2018/5/29 16:4:23(0)
  595. [ 0.960005] B0 1 s2mps11-rtc s2mps11-rtc: rtc core: registered s2mps11-rtc as rtc0
  596. [ 0.960251] B0 1 i2c /dev entries driver
  597. [ 0.962285] B0 1 lirc_dev: IR Remote Control driver registered, major 249
  598. [ 0.962340] B0 1 IR NEC protocol handler initialized
  599. [ 0.962381] B0 1 IR RC5(x) protocol handler initialized
  600. [ 0.962422] B0 1 IR RC6 protocol handler initialized
  601. [ 0.962462] B0 1 IR JVC protocol handler initialized
  602. [ 0.962502] B0 1 IR Sony protocol handler initialized
  603. [ 0.962541] B0 1 IR RC5 (streamzap) protocol handler initialized
  604. [ 0.962584] B0 1 IR SANYO protocol handler initialized
  605. [ 0.962625] B0 1 IR MCE Keyboard/mouse protocol handler initialized
  606. [ 0.962671] B0 1 IR LIRC bridge handler initialized
  607. [ 0.962991] B0 1 exynos-mdev.0: Media0[0xe63fac00] was registered successfully
  608. [ 0.963213] B0 1 exynos-mdev.1: Media1[0xe63fb000] was registered successfully
  609. [ 0.963455] B0 1 exynos-mdev.2: Media2[0xe63fb400] was registered successfully
  610. [ 0.963778] B0 1 s5p-mipi-csis.0
  611. [ 0.963805] B0 1 : s5pcsis_probe : csis0 probe success
  612. [ 0.964026] B0 1 s5p-mipi-csis.1
  613. [ 0.964053] B0 1 : s5pcsis_probe : csis1 probe success
  614. [ 0.964215] B0 1 s5p-mipi-csis.2
  615. [ 0.964241] B0 1 : s5pcsis_probe : csis2 probe success
  616. [ 0.964622] B0 1 [INFO]flite_probe:2215: FIMC-LITE0 probe success
  617. [ 0.964890] B0 1 [INFO]flite_probe:2215: FIMC-LITE1 probe success
  618. [ 0.965291] B0 1 S5K6B2: sensor_probe : sensor driver probed success
  619. [ 0.965350] B0 1 exynos-mdev.1: Registered sensor subdevice S5K6B2
  620. [ 0.965433] B0 1 [INFO]flite_probe:2215: FIMC-LITE2 probe success
  621. [ 0.966302] B0 1 [INFO]gsc_probe:1570: gsc-0 registered successfully
  622. [ 0.967026] B0 1 [INFO]gsc_probe:1570: gsc-1 registered successfully
  623. [ 0.967733] B0 1 [INFO]gsc_probe:1570: gsc-2 registered successfully
  624. [ 0.968431] B0 1 [INFO]gsc_probe:1570: gsc-3 registered successfully
  625. [ 0.968605] B0 1 exynos5-scaler exynos5-scaler: ++sc_probe
  626. [ 0.969070] B0 1 exynos5-scaler exynos5-scaler: scaler registered successfully
  627. [ 0.969341] B0 1 Initialize JPEG driver
  628. [ 0.972606] B0 1 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
  629. [ 0.972830] B0 1 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
  630. [ 0.972954] B0 1 Exynos Graphics 2D driver, (c) 2011 Samsung Electronics
  631. [ 0.973227] B0 1 [fimg2d_probe] base address: 0x10850000
  632. [ 0.973276] B0 1 [fimg2d_probe] irq: 123
  633. [ 0.973358] B0 1 [fimg2d_clk_setup] aclk_acp(266000000) pclk_acp(133000000)
  634. [ 0.973423] B0 1 [fimg2d_clk_setup] gate clk: fimg2d
  635. [ 0.973466] B0 1 [fimg2d_probe] enable runtime pm
  636. [ 0.973593] B0 1 [fimg2d_probe] register sysmmu page fault handler
  637. [ 0.973854] B0 1 EXYNOS MFC V4L2 Driver, (c) 2010 Samsung Electronics
  638. [ 0.974398] B0 1 s5p-mfc s5p-mfc-v6: decoder registered as /dev/video6
  639. [ 0.974621] B0 1 s5p-mfc s5p-mfc-v6: encoder registered as /dev/video7
  640. [ 0.974849] B0 1 s5p-mfc s5p-mfc-v6: secure decoder registered as /dev/video8
  641. [ 0.975072] B0 1 s5p-mfc s5p-mfc-v6: secure encoder registered as /dev/video9
  642. [ 0.975531] B0 1 s5p_mfc_probe--
  643. [ 0.975672] B0 1 i2c-core: driver [exynos_hdcp] using legacy suspend method
  644. [ 0.975724] B0 1 i2c-core: driver [exynos_hdcp] using legacy resume method
  645. [ 0.975793] B0 1 Samsung HDMI output driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
  646. [ 0.976062] B0 1 s5p-hdmi exynos5-hdmi: hdmi ip version = 2
  647. [ 0.976504] B0 1 s5p-hdmi exynos5-hdmi: Set HDMI phy power off
  648. [ 0.981509] B0 1 s5p-hdmi exynos5-hdmi: probe sucessful
  649. [ 0.981694] B0 1 Samsung TV Mixer driver, (c) 2010-2011 Samsung Electronics Co., Ltd.
  650. [ 0.981819] B0 1 s5p-mixer s5p-mixer: probe start
  651. [ 0.981860] B0 1 s5p-mixer s5p-mixer: mixer ip version = 2
  652. [ 0.982123] B0 1 s5p-mixer s5p-mixer: resources acquired
  653. [ 0.982191] B0 1 s5p-mixer s5p-mixer: added output 'S5P HDMI connector' from module 's5p-hdmi'
  654. [ 0.982466] B0 1 s5p-mixer s5p-mixer: registered layer mxr0_graph0 as /dev/video16
  655. [ 0.982712] B0 1 s5p-mixer s5p-mixer: registered layer mxr0_graph1 as /dev/video17
  656. [ 0.982956] B0 1 s5p-mixer s5p-mixer: registered layer mxr1_graph2 as /dev/video18
  657. [ 0.983211] B0 1 s5p-mixer s5p-mixer: registered layer mxr1_graph3 as /dev/video19
  658. [ 0.983268] B0 1 s5p-mixer s5p-mixer: mixer0 create links
  659. [ 0.983323] B0 1 s5p-mixer s5p-mixer: mixer1 create links
  660. [ 0.983377] B0 1 s5p-mixer s5p-mixer: mixer links are created successfully
  661. [ 0.983444] B0 1 s5p-mixer s5p-mixer: probe successful
  662. [ 1.012559] B0 1 ___exynos5_clk_ip_gscl0_ctrl: clk name: gscl_flite2___
  663. [ 1.012618] B0 1 ___exynos5_clk_ip_gscl0_ctrl: clk name: gscl_flite2___
  664. [ 1.012686] B0 1 ___exynos5_clk_ip_gscl0_ctrl: clk name: gscl_flite0___
  665. [ 1.012741] B0 1 ___exynos5_clk_ip_gscl0_ctrl: clk name: gscl_flite0___
  666. [ 1.013353] B0 1 [MHL] sii8240_init was called
  667. [ 1.014174] B0 1 input: sii8240_rcp as /devices/virtual/input/input2
  668. [ 1.014453] B0 1 ***MHL probe is successful
  669. [ 1.015049] B0 1 tmu init threshold code=8c876e69, id=0
  670. [ 1.015124] B0 1 tmu init threshold code=8c876e69, id=1
  671. [ 1.015197] B0 1 tmu init threshold code=86816863, id=2
  672. [ 1.015267] B0 1 tmu init threshold code=847f6661, id=3
  673. [ 1.015646] B0 1 Exynos: Kernel Thermal management registered
  674. [ 1.015773] B0 1 s3c2410_wdt: S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
  675. [ 1.016124] B0 1 s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq disabled
  676. [ 1.016430] B0 1 device-mapper: uevent: version 1.0.3
  677. [ 1.016783] B0 1 device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  678. [ 1.017044] B0 1 Bluetooth: HCI UART driver ver 2.2
  679. [ 1.017087] B0 1 Bluetooth: HCI H4 protocol initialized
  680. [ 1.017407] B0 1 cpuidle: using governor ladder
  681. [ 1.017878] B0 1 cpuidle: using governor menu
  682. [ 1.017942] B0 1 Synopsys Designware Multimedia Card Interface Driver
  683. [ 1.018100] B0 1 dw_mmc dw_mmc.0: Using internal DMA controller.
  684. [ 1.018349] B0 1 dw_mmc dw_mmc.0: no vmmc regulator found
  685. [ 1.018403] B0 1 dw_mmc dw_mmc.0: no vqmmc regulator found
  686. [ 1.019805] B0 57 mmc_host mmc0: card inserted
  687. [ 1.019862] B0 1 dw_mmc dw_mmc.0: Version ID is 241a
  688. [ 1.019906] B0 1 dw_mmc dw_mmc.0: DW MMC controller at irq 107, 64 bit host data width, 128 deep fifo
  689. [ 1.020052] B0 1 dw_mmc dw_mmc.1: Using internal DMA controller.
  690. [ 1.020422] B0 1 dw_mmc dw_mmc.1: no vmmc regulator found
  691. [ 1.020476] B0 1 dw_mmc dw_mmc.1: no vqmmc regulator found
  692. [ 1.021775] B0 1 dw_mmc dw_mmc.1: Version ID is 241a
  693. [ 1.021822] B0 1 dw_mmc dw_mmc.1: DW MMC controller at irq 108, 64 bit host data width, 128 deep fifo
  694. [ 1.021969] B0 1 dw_mmc dw_mmc.2: Using internal DMA controller.
  695. [ 1.022309] B0 1 dw_mmc dw_mmc.2: no vmmc regulator found
  696. [ 1.022407] B0 1 dw_mmc dw_mmc.2: vqmmc regulator found
  697. [ 1.022583] B0 1 dwmci2_init, external MMC(SD) card On.
  698. [ 1.022884] B0 1 dw_mmc dw_mmc.2: success to request irq for card detect.
  699. [ 1.022938] B0 1 wake enabled for irq 532
  700. [ 1.023092] B0 1 set external MMC(SD) card Off.
  701. [ 1.024316] B0 57 mmc_host mmc2: card inserted
  702. [ 1.024368] B0 1 dw_mmc dw_mmc.2: Version ID is 241a
  703. [ 1.024412] B0 1 dw_mmc dw_mmc.2: DW MMC controller at irq 109, 64 bit host data width, 128 deep fifo
  704. [ 1.049061] B1 54 mmc_host mmc0: Bus speed (slot 0) = 20000000Hz (slot req 400000Hz, actual 400000HZ div = 25)
  705. [ 1.052786] B0 1 lp5562 21-0030: lp5562 programmable led chip found
  706. [ 1.052912] B0 1 Registered led device: led_r
  707. [ 1.053442] B0 1 Registered led device: led_g
  708. [ 1.054022] B0 1 Registered led device: led_b
  709. [ 1.054809] B0 1 Registered led device: leds-sec1
  710. [ 1.059714] B0 1 Registered led device: torch-sec1
  711. [ 1.066403] B0 1 Successfully registered hid_synaptics_driver
  712. [ 1.066579] B0 1 usbcore: registered new interface driver usbhid
  713. [ 1.066631] B0 1 usbhid: USB HID core driver
  714. [ 1.067588] B0 1 ashmem: initialized
  715. [ 1.070059] B0 1 sec-fuelgauge 18-0036: MAX17048 Fuel-Gauge Ver 0x0012
  716. [ 1.073405] B0 1 wake enabled for irq 525
  717. [ 1.074853] B0 1 i2c-core: driver [sec-fuelgauge] using legacy suspend method
  718. [ 1.074908] B0 1 i2c-core: driver [sec-fuelgauge] using legacy resume method
  719. [ 1.074980] B0 1 func:max77803_charger_init
  720. [ 1.075097] B0 1 max77803_charger_probe: MAX77803 Charger driver probe
  721. [ 1.077834] B0 1 max77803_dump_reg
  722. [ 1.078435] B0 1 max77803: c: 0xb0(0x40)
  723. [ 1.079118] B0 1 max77803: c: 0xb1(0xff)
  724. [ 1.079768] B0 1 max77803: c: 0xb2(0x5d)
  725. [ 1.080442] B0 1 max77803: c: 0xb3(0x60)
  726. [ 1.081099] B0 1 max77803: c: 0xb4(0x31)
  727. [ 1.081745] B0 1 max77803: c: 0xb5(0x00)
  728. [ 1.082357] B0 1 max77803: c: 0xb6(0xb6)
  729. [ 1.082960] B0 1 max77803: c: 0xb7(0x05)
  730. [ 1.083561] B0 1 max77803: c: 0xb8(0x30)
  731. [ 1.084199] B0 1 max77803: c: 0xb9(0x8e)
  732. [ 1.084802] B0 1 max77803: c: 0xba(0x20)
  733. [ 1.085404] B0 1 max77803: c: 0xbb(0xdd)
  734. [ 1.086004] B0 1 max77803: c: 0xbc(0xd6)
  735. [ 1.086606] B0 1 max77803: c: 0xbd(0x0c)
  736. [ 1.087206] B0 1 max77803: c: 0xbe(0x40)
  737. [ 1.087807] B0 1 max77803: c: 0xbf(0xbf)
  738. [ 1.088408] B0 1 max77803: c: 0xc0(0x17)
  739. [ 1.089041] B0 1 max77803: c: 0xc1(0x19)
  740. [ 1.089644] B0 1 max77803: c: 0xc2(0x00)
  741. [ 1.090245] B0 1 max77803: c: 0xc3(0x67)
  742. [ 1.090845] B0 1 max77803: c: 0xc4(0xc4)
  743. [ 1.091446] B0 1 max77803: c: 0xc5(0xc5)
  744. [ 1.092386] B0 1 max77803_get_charger_state: CHG_DTLS : 0x 1
  745. [ 1.093570] B0 1 max77803_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
  746. [ 1.094226] B0 1 max77803_get_charger_state: CHG_DTLS : 0x 1
  747. [ 1.095415] B0 1 max77803_get_input_current: CHG_CNFG_09(0x17)
  748. [ 1.096108] B0 57 max77803_get_charger_state: CHG_DTLS : 0x 1
  749. [ 1.097293] B0 57 max77803_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
  750. [ 1.097912] B0 57 max77803_get_charger_state: CHG_DTLS : 0x 1
  751. [ 1.099137] B0 57 max77803_get_input_current: CHG_CNFG_09(0x17)
  752. [ 1.099482] B0 1 wake enabled for irq 531
  753. [ 1.102901] B0 1 gesture_power_on_off, onoff = 1, system_rev = 10
  754. [ 1.103075] B0 1 gesture_power_on_off, Gesture power ON
  755. [ 1.103120] B0 1 ssp_get_positions, position acc : 3, mag = 0
  756. [ 1.103164] B0 1
  757. [ 1.103181] B0 1 #####################################################
  758. [ 1.103682] B0 1 [SSP] MCU Firm Rev : Old = 15120300, New = 15120300
  759. [ 1.105658] B0 1 [SSP] MCU device ID = 85, reading ID = 85
  760. [ 1.105709] B0 1 [SSP] Sensor Posision A : 3, G : 3, M: 0, P: 0
  761. [ 1.106833] B0 1 [SSP] FUSE ROM Data 161 , 161, 155
  762. [ 1.107222] B0 1 input: accelerometer_sensor as /devices/virtual/input/input3
  763. [ 1.107713] B0 1 input: gyro_sensor as /devices/virtual/input/input4
  764. [ 1.108200] B0 1 input: pressure_sensor as /devices/virtual/input/input5
  765. [ 1.108692] B0 1 input: light_sensor as /devices/virtual/input/input6
  766. [ 1.109318] B0 1 input: proximity_sensor as /devices/virtual/input/input7
  767. [ 1.109852] B0 1 input: temp_humidity_sensor as /devices/virtual/input/input8
  768. [ 1.110288] B0 1 input: gesture_sensor as /devices/virtual/input/input9
  769. [ 1.110756] B0 1 input: sig_motion_sensor as /devices/virtual/input/input10
  770. [ 1.111338] B0 1 input: step_det_sensor as /devices/virtual/input/input11
  771. [ 1.111796] B0 1 input: step_cnt_sensor as /devices/virtual/input/input12
  772. [ 1.112358] B0 1 [SSP]: requesting IRQ 539
  773. [ 1.113688] B0 1 input: ssp_context as /devices/virtual/input/input13
  774. [ 1.114344] B0 1 ssp_enable, enable = 1, old enable = 1
  775. [ 1.114408] B0 1 wake enabled for irq 539
  776. [ 1.114454] B0 1 [SSP]: ssp_probe - probe success!
  777. [ 1.114496] B0 1 #####################################################
  778. [ 1.114540] B0 1
  779. [ 1.114615] B0 1 mckernelapi : Mobicore API module initialized!
  780. [ 1.114680] B0 1 mcdrvkmod mcd: MobiCore Driver, Build: Fri Jul 20 08:46:16 2018
  781. [ 1.114736] B0 1 mcdrvkmod mcd: MobiCore mcDrvModuleApi version is 1.1
  782. [ 1.114786] B0 1 mcdrvkmod mcd: MobiCore *** SAMSUNG_Exynos5410_Release_V006 ###
  783. [ 1.115702] B0 1 usbcore: registered new interface driver snd-usb-audio
  784. [ 1.116247] B0 1 LDO1: Failed to create debugfs directory
  785. [ 1.118460] B0 1 Samsung SRP driver, (c)2011 Samsung Electronics
  786. [ 1.119306] B0 1 exynos5_audio_set_mclk: mclk enable
  787. [ 1.119359] B0 1 exynos5_audio_set_mclk: 1000
  788. [ 1.119759] B0 1 samsung-i2s samsung-i2s.0: EPLL rate = 400000000
  789. [ 1.119811] B0 1 samsung-i2s samsung-i2s.0: SRP rate = 100000000
  790. [ 1.119860] B0 1 samsung-i2s samsung-i2s.0: BUS rate = 50000000
  791. [ 1.130222] B0 54 mmc_host mmc0: Bus speed (slot 0) = 320000000Hz (slot req 160000000Hz, actual 160000000HZ div = 1)
  792. [ 1.131329] B0 54 dw_mmc dw_mmc.0: Tuning map: 0x 00003e3f mid: 3
  793. [ 1.131473] B0 54 mmc_host mmc0: Bus speed (slot 0) = 40000000Hz (slot req 52000000Hz, actual 40000000HZ div = 0)
  794. [ 1.131717] B0 54 mmc_host mmc0: Bus speed (slot 0) = 320000000Hz (slot req 160000000Hz, actual 160000000HZ div = 1)
  795. [ 1.131905] B0 54 mmc0: new HS200-DDR MMC card at address 0001
  796. [ 1.132331] B0 54 mmcblk0: mmc0:0001 V3W00M 14.6 GiB
  797. [ 1.136098] B0 54 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
  798. [ 1.139706] B0 54 set external MMC(SD) card On.
  799. [ 1.174635] B0 54 mmc_host mmc2: Bus speed (slot 0) = 20000000Hz (slot req 640000Hz, actual 625000HZ div = 16)
  800. [ 1.184423] B0 54 set external MMC(SD) card Off.
  801. [ 1.482347] B0 1 asoc: wm5102-aif1 <-> samsung-i2s.4 mapping ok
  802. [ 1.482735] B0 1 asoc: wm5102-aif2 <-> adonisuniv.cp mapping ok
  803. [ 1.483117] B0 1 asoc: wm5102-aif3 <-> adonisuniv.bt mapping ok
  804. [ 1.483625] B0 1 asoc: wm5102-aif1 <-> samsung-i2s.0 mapping ok
  805. [ 1.484675] B0 1 wm5102-codec wm5102-codec: dapm: unknown pin RCV
  806. [ 1.489883] B0 1 wm5102-codec wm5102-codec: dapm: unknown pin VPS
  807. [ 1.496385] B0 1 wm5102-codec wm5102-codec: dapm: unknown pin SPK
  808. [ 1.502890] B0 1 wm5102-codec wm5102-codec: dapm: unknown pin HP
  809. [ 1.509557] B0 1 wm5102-codec wm5102-codec: adonisuniv_late_probe: Successfully created
  810. [ 1.512395] B0 1 GACT probability NOT on
  811. [ 1.512435] B0 1 Mirror/redirect action on
  812. [ 1.512476] B0 1 u32 classifier
  813. [ 1.512505] B0 1 Actions configured
  814. [ 1.512543] B0 1 Netfilter messages via NETLINK v0.30.
  815. [ 1.512602] B0 1 nfnl_acct: registering with nfnetlink.
  816. [ 1.512682] B0 1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  817. [ 1.513132] B0 1 ctnetlink v0.93: registering with nfnetlink.
  818. [ 1.513213] B0 1 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  819. [ 1.513267] B0 1 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  820. [ 1.513700] B0 1 xt_time: kernel timezone is -0000
  821. [ 1.514182] B0 1 ip_tables: (C) 2000-2006 Netfilter Core Team
  822. [ 1.514435] B0 1 arp_tables: (C) 2002 David S. Miller
  823. [ 1.514516] B0 1 TCP: cubic registered
  824. [ 1.514552] B0 1 Initializing XFRM netlink socket
  825. [ 1.514931] B0 1 NET: Registered protocol family 10
  826. [ 1.515670] B0 1 Mobile IPv6
  827. [ 1.515730] B0 1 ip6_tables: (C) 2000-2006 Netfilter Core Team
  828. [ 1.515925] B0 1 IPv6 over IPv4 tunneling driver
  829. [ 1.516887] B0 1 NET: Registered protocol family 17
  830. [ 1.516953] B0 1 NET: Registered protocol family 15
  831. [ 1.517052] B0 1 Bridge firewalling registered
  832. [ 1.517323] B0 1 Bluetooth: RFCOMM socket layer initialized
  833. [ 1.517380] B0 1 Bluetooth: RFCOMM ver 1.11
  834. [ 1.517421] B0 1 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  835. [ 1.517539] B0 1 NET: Registered protocol family 35
  836. [ 1.557814] B0 1 s5p-mipi-dsim s5p-mipi-dsim.1: rx fifo : 1600031c, response : 1c, rx_size : 3
  837. [ 1.574549] B0 1 s5p-mipi-dsim s5p-mipi-dsim.1: rx fifo : 1c00271c, response : 1c, rx_size : 39
  838. [ 1.591198] B0 1 s5p-mipi-dsim s5p-mipi-dsim.1: rx fifo : 1600031c, response : 1c, rx_size : 3
  839. [ 1.607880] B0 1 s5p-mipi-dsim s5p-mipi-dsim.1: rx fifo : 3300041c, response : 1c, rx_size : 4
  840. [ 1.624565] B0 1 s5p-mipi-dsim s5p-mipi-dsim.1: rx fifo : 3500081c, response : 1c, rx_size : 8
  841. [ 1.657936] B0 1 s5p-mipi-dsim s5p-mipi-dsim.1: rx fifo : 10000f1c, response : 1c, rx_size : 15
  842. [ 1.658006] B0 1 lcd panel: ID: 42, 80, 47
  843. [ 1.658983] B0 1 Dynamic Aid Finished !
  844. [ 1.724624] B0 1 lcd panel: acl: 0, auto_brightness: 0
  845. [ 1.757989] B0 1 lcd panel: psre: 0, auto_brightness: 0
  846. [ 1.774669] B0 1 lcd panel: tset: 0
  847. [ 1.774707] B0 1 lcd panel: brightness=143, bl=41, candela=143
  848. [ 1.774755] B0 1 lcd panel: ../../../../../../kernel/samsung/exynos5410/drivers/video/backlight/s6e8fa0_I_mipi_lcd.c lcd panel driver has been probed.
  849. [ 1.774845] B0 1 s5p-mipi-dsim s5p-mipi-dsim.1: mipi-dsi driver(RGB mode) has been probed.
  850. [ 1.775912] B0 1 Registering SWP/SWPB emulation handler
  851. [ 1.776979] B0 1 big.LITTLE switcher initializing
  852. [ 1.783470] B0 1 big.LITTLE switcher initialized
  853. [ 1.783512] B0 1 mif: init_modem: init_modem
  854. [ 1.783585] B0 1 mif: umts_modem_cfg_gpio: umts_modem_cfg_gpio done
  855. [ 1.783647] B0 1 mif: modem_link_pm_config_gpio: modem_link_pm_config_gpio done
  856. [ 1.783716] B0 1 mif: s5p_ehci_port_reg_init: port reg get success (e7b52000)
  857. [ 1.783870] B0 1 mif: modem_probe: mif_sipc5
  858. [ 1.787913] B0 1 wake enabled for irq 535
  859. [ 1.787951] B0 1 mif: create_modemctl_device: xmm6262 is created!!!
  860. [ 1.788661] B0 1 wake enabled for irq 522
  861. [ 1.789038] B0 1 usbcore: registered new interface driver cdc_modem
  862. [ 1.789094] B0 1 mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xe5fa4000)
  863. [ 1.789149] B0 1 mif: hsic_create_link_device: usb : create_link_device DONE
  864. [ 1.789201] B0 1 mif: modem_probe: link created: usb
  865. [ 1.793816] B0 1 mif: create_io_device: Bood device = umts_boot0
  866. [ 1.795342] B0 1 mif: sipc5_init_io_device: dm_state : umts_dm0, sucess
  867. [ 1.803337] B0 1 mif: modem_probe: Complete!!!
  868. [ 1.817228] B0 1 mdnie mdnie: registered successfully
  869. [ 1.817875] B0 1 s3c-fb exynos5-fb.1: all clocks are ready!
  870. [ 1.836317] B0 1 mdnie mdnie: standard_ui
  871. [ 1.836500] B0 1 s3c-fb exynos5-fb.1: failed to find bootloader framebuffer
  872. [ 1.836567] B0 1 s3c-fb exynos5-fb.1: couldn't copy bootloader framebuffer into default window; clearing instead
  873. [ 1.858461] B0 1 s3c-fb exynos5-fb.1: pm_stay_awake
  874. [ 1.858505] B0 1 s3c-fb exynos5-fb.1: window 2: fb
  875. [ 1.858727] B0 1 lcdfreq lcdfreq: mout_mpll_bpll rate is 532000000, fimd div=1
  876. [ 1.858812] B0 1 lcdfreq lcdfreq: 60 div is 4
  877. [ 1.858851] B0 1 lcdfreq lcdfreq: 40 div is 6
  878. [ 1.859068] B0 1 lcdfreq lcdfreq: lcdfreq_probe is done
  879. [ 1.860796] B0 1 regulator regulator.4: func:max77803_reg_is_enabled
  880. [ 1.860845] B0 1 regulator regulator.4: func:max77803_get_rid
  881. [ 1.860891] B0 1 regulator regulator.4: func:max77803_get_enable_register
  882. [ 1.861516] B0 1 CHARGER: incomplete constraints, leaving on
  883. [ 1.861562] B0 1 regulator regulator.3: func:max77803_reg_is_enabled
  884. [ 1.861610] B0 1 regulator regulator.3: func:max77803_get_rid
  885. [ 1.861655] B0 1 regulator regulator.3: func:max77803_get_enable_register
  886. [ 1.862273] B0 1 regulator regulator.2: func:max77803_reg_is_enabled
  887. [ 1.862322] B0 1 regulator regulator.2: func:max77803_get_rid
  888. [ 1.862366] B0 1 regulator regulator.2: func:max77803_get_enable_register
  889. [ 1.862982] B0 1 safeout1 range: incomplete constraints, leaving on
  890. [ 1.863134] B0 1
  891. [ 1.863152] B0 1 uiCount = 4050
  892. [ 1.863184] B0 1 PA FB = 0xBCD50000, bits per pixel = 32
  893. [ 1.863226] B0 1 screen width=1080 height=1920 va=0x0xres_virtual = 1080, yres_virtual = 1920, xoffset = 0, yoffset = 0
  894. [ 1.863304] B0 1 fb_size=16588800
  895. [ 1.863337] B0 1 Back frameBuffer[0].VAddr=007e9000 PAddr=bc539000 size=8294400
  896. [ 1.864507] B0 1 input: gpio-keys as /devices/platform/gpio-keys.0/input/input14
  897. [ 1.865398] B0 1 input: sec_touchkey as /devices/platform/i2c-gpio.8/i2c-8/8-0020/input/input15
  898. [ 1.919116] B0 1 sec_touchkey_driver 8-0020: JA LCD type Print : 0x428047
  899. [ 1.927543] B1 1 sec_touchkey_driver 8-0020: touchkey_firmware_version_check F/W version: 0x12, Module version:0x9
  900. [ 1.927617] B1 1 sec_touchkey_driver 8-0020: Firmware id 20065
  901. [ 1.979652] B1 1 sec_touchkey_driver 8-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
  902. [ 1.979719] B1 1 sec_touchkey_driver 8-0020: Firmware auto update do not excute
  903. [ 1.979775] B1 1 sec_touchkey_driver 8-0020: firmware_ver(banary=18, current=18)
  904. [ 1.979830] B1 1 sec_touchkey_driver 8-0020: module_ver(banary=9, current=9)
  905. [ 1.979883] B1 1 sec_touchkey_driver 8-0020: Touchkey TA information
  906. [ 2.014033] B0 96 old_hot 0 hot 3
  907. [ 2.117561] B1 1 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  908. [ 2.117869] B1 1 s2mps11_rtc_read_time: 2018/5/29 16:4:25(0)
  909. [ 2.118078] B1 1 s2mps11-rtc s2mps11-rtc: setting system clock to 2018-05-29 16:04:25 UTC (1527609865)
  910. [ 2.118158] B1 1 CPUFREQ of CA7 L0 : 1200000 uV
  911. [ 2.118200] B1 1 CPUFREQ of CA7 L1 : 1200000 uV
  912. [ 2.118238] B1 1 CPUFREQ of CA7 L2 : 1137500 uV
  913. [ 2.118275] B1 1 CPUFREQ of CA7 L3 : 1075000 uV
  914. [ 2.118313] B1 1 CPUFREQ of CA7 L4 : 1012500 uV
  915. [ 2.118350] B1 1 CPUFREQ of CA7 L5 : 962500 uV
  916. [ 2.118388] B1 1 CPUFREQ of CA7 L6 : 950000 uV
  917. [ 2.118425] B1 1 CPUFREQ of CA7 L7 : 950000 uV
  918. [ 2.118462] B1 1 CPUFREQ of CA7 L8 : 950000 uV
  919. [ 2.118499] B1 1 CPUFREQ of CA7 L9 : 950000 uV
  920. [ 2.118536] B1 1 CPUFREQ of CA7 L10 : 950000 uV
  921. [ 2.118574] B1 1 CPUFREQ of CA7 L11 : 950000 uV
  922. [ 2.118689] B1 1 CPUFREQ of CA15 L0 : 1225000 uV
  923. [ 2.118727] B1 1 CPUFREQ of CA15 L1 : 1225000 uV
  924. [ 2.118764] B1 1 CPUFREQ of CA15 L2 : 1225000 uV
  925. [ 2.118802] B1 1 CPUFREQ of CA15 L3 : 1175000 uV
  926. [ 2.118840] B1 1 CPUFREQ of CA15 L4 : 1137500 uV
  927. [ 2.118877] B1 1 CPUFREQ of CA15 L5 : 1112500 uV
  928. [ 2.118965] B1 1 CPUFREQ of CA15 L6 : 1075000 uV
  929. [ 2.119014] B1 1 CPUFREQ of CA15 L7 : 1037500 uV
  930. [ 2.119053] B1 1 CPUFREQ of CA15 L8 : 1000000 uV
  931. [ 2.119090] B1 1 CPUFREQ of CA15 L9 : 975000 uV
  932. [ 2.119127] B1 1 CPUFREQ of CA15 L10 : 937500 uV
  933. [ 2.119165] B1 1 CPUFREQ of CA15 L11 : 912500 uV
  934. [ 2.119202] B1 1 CPUFREQ of CA15 L12 : 900000 uV
  935. [ 2.119239] B1 1 CPUFREQ of CA15 L13 : 900000 uV
  936. [ 2.119276] B1 1 CPUFREQ of CA15 L14 : 900000 uV
  937. [ 2.119313] B1 1 CPUFREQ of CA15 L15 : 900000 uV
  938. [ 2.119350] B1 1 CPUFREQ of CA15 L16 : 900000 uV
  939. [ 2.119387] B1 1 CPUFREQ of CA15 L17 : 900000 uV
  940. [ 2.119425] B1 1 CPUFREQ of CA15 L18 : 900000 uV
  941. [ 2.119553] B1 1 fout_apll[800000000]
  942. [ 2.137066] B0 1 wake enabled for irq 533
  943. [ 2.139917] B0 1 input: Headset as /devices/platform/s3c64xx-spi.2/spi_master/spi2/spi2.0/arizona-extcon/input/input16
  944. [ 2.140743] B0 1 INT 800000Khz ASV is 987500uV
  945. [ 2.140807] B0 1 INT 700000Khz ASV is 962500uV
  946. [ 2.140845] B0 1 INT 650000Khz ASV is 962500uV
  947. [ 2.140878] B0 1 INT 600000Khz ASV is 962500uV
  948. [ 2.140933] B0 1 INT 550000Khz ASV is 962500uV
  949. [ 2.140969] B0 1 INT 400000Khz ASV is 962500uV
  950. [ 2.140999] B1 58 arizona spi2.0: Spurious HPDET IRQ
  951. [ 2.141035] B0 1 INT 267000Khz ASV is 962500uV
  952. [ 2.141083] B0 1 INT 200000Khz ASV is 962500uV
  953. [ 2.141116] B0 1 INT 160000Khz ASV is 962500uV
  954. [ 2.141146] B0 1 INT 100000Khz ASV is 962500uV
  955. [ 2.141176] B0 1 INT 50000Khz ASV is 962500uV
  956. [ 2.143180] B0 1 MIF 800000Khz ASV is 1000000uV
  957. [ 2.143235] B0 1 MIF 667000Khz ASV is 1025000uV
  958. [ 2.143272] B0 1 MIF 533000Khz ASV is 1025000uV
  959. [ 2.143317] B0 1 MIF 400000Khz ASV is 887500uV
  960. [ 2.143355] B0 1 MIF 267000Khz ASV is 1025000uV
  961. [ 2.143389] B0 1 MIF 200000Khz ASV is 850000uV
  962. [ 2.143437] B0 1 MIF 160000Khz ASV is 1025000uV
  963. [ 2.143475] B0 1 MIF 100000Khz ASV is 837500uV
  964. [ 2.143506] B0 1 Factor of 2 frequencies only
  965. [ 2.151800] B1 58 arizona spi2.0: Spurious HPDET IRQ
  966. [ 2.161573] B1 58 arizona spi2.0: Spurious HPDET IRQ
  967. [ 2.171360] B1 58 arizona spi2.0: Spurious HPDET IRQ
  968. [ 2.181999] B0 58 arizona spi2.0: Spurious HPDET IRQ
  969. [ 2.239199] B0 1 init_volt[1000000], freq[800000]
  970. [ 2.240614] B0 1 Before dll lock[35]
  971. [ 2.240639] B0 1 After dll lock[30], PHY reg[0x10101e50]
  972. [ 2.240668] B0 1 Before dll lock[35]
  973. [ 2.240691] B0 1 After dll lock[30], PHY reg[0x10101e50]
  974. [ 2.240720] B0 1 PMU_SPARE1 0x1e001e
  975. [ 2.246148] B0 1 sec-battery sec-battery: sec_battery_probe: Failed to Enable Wakeup Source(-6)
  976. [ 2.254504] B0 1 sec-battery sec-battery: sec_battery_probe: SEC Battery Driver Monitorwork
  977. [ 2.260572] B0 54 max77803_get_input_current: CHG_CNFG_09(0x17)
  978. [ 2.260604] B0 54 sec_bat_get_current_average
  979. [ 2.262526] B0 54 sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4203mV),Inow(460mA),SOC(90%),Tbat(317)
  980. [ 2.262578] B0 54 sec-battery sec-battery: sec_bat_time_management: Charging Disabled
  981. [ 2.262619] B0 54 sec-battery sec-battery: sec_bat_monitor_work: Status(Discharging), mode(None), Health(Good), Cable(1), siop_level(100)
  982. [ 2.262719] B0 54 sec-battery sec-battery: sec_bat_monitor_work: Call sec_bat_set_polling
  983. [ 2.263967] B0 54 ice4_fpga: CDONE_FAIL 0
  984. [ 2.264012] B0 54 ice4_fpga: barcode_fpga_fimrware_update_start
  985. [ 2.264112] B0 1 ice4_fpga: barcode_emul_probe probe!
  986. [ 2.264178] B0 1 ice4_fpga: CDONE_FAIL 0
  987. [ 2.264201] B0 1 ice4_fpga: FPGA FW is NOT loaded!
  988. [ 2.264292] B0 1 ice4_fpga: probe complete barcode_emul_probe
  989. [ 2.269137] B0 54 ice4_fpga: CDONE_FAIL 0
  990. [ 2.288979] B0 1 dhd_module_init in
  991. [ 2.289025] B0 1 found wifi platform device bcmdhd_wlan
  992. [ 2.289134] B0 1 Power-up adapter 'DHD generic adapter'
  993. [ 2.289179] B0 1 wifi_platform_set_power = 1
  994. [ 2.289203] B0 1 WiFi: trying to acquire BT lock
  995. [ 2.289229] B0 1 ####btlock acquired cookie: WiFi
  996. [ 2.289254] B0 1 wifi_platform_set_power: btlock acquired
  997. [ 2.289283] B0 1 check BCM4335, check_bcm4335_rev
  998. [ 2.289324] B0 1 /data/.rev file open error
  999. [ 2.289349] B0 1 ------------------------------------------------
  1000. [ 2.289379] B0 1 ------------------------------------------------
  1001. [ 2.289411] B0 1 brcm_wlan_power Enter: power on
  1002. [ 2.289438] B0 1 [brcm_wlan_power] BT_REG_ON -> On
  1003. [ 2.363926] B0 96 [keys] flip_cover_work #1 : 1
  1004. [ 2.393924] B0 1 gpio_table = [2]
  1005. [ 2.394154] B0 1 WLAN: GPIO_WLAN_EN = 1
  1006. [ 2.394177] B0 1 [brcm_wlan_power] BT_REG_ON -> Off
  1007. [ 2.598925] B0 1 wifi_platform_bus_enumerate device present 1
  1008. [ 2.598956] B0 1 gpio_table = [6]
  1009. [ 2.608981] B0 1 mmc_force_presence_change: called for device exynos5_device_dwmci1
  1010. [ 2.615720] B0 1 dw_mmc dw_mmc.1: card inserted.
  1011. [ 2.615755] B0 96 mmc_host mmc1: card inserted
  1012. [ 2.724505] B1 56 s5p-ehci s5p-ehci: host_phy_susp
  1013. [ 2.724555] B1 56 s5p_ehci_runtime_suspend: usage=0, child=0
  1014. [ 2.754154] B1 56 exynos-xhci exynos-xhci.0: exynos_xhci_runtime_suspend
  1015. [ 2.759874] B1 56 exynos-xhci exynos-xhci.0: exynos_xhci_runtime_suspend<-- retval(0)
  1016. [ 2.843938] B0 55 mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 400000Hz, actual 390625HZ div = 32)
  1017. [ 2.859654] B0 55 mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  1018. [ 2.862369] B0 55 mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  1019. [ 2.863896] B0 55 mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  1020. [ 2.918419] B0 55 mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
  1021. [ 2.918783] B0 55 dw_mmc dw_mmc.1: Tuning map: 0x 000000ff mid: 0
  1022. [ 2.919152] B0 55 dw_mmc dw_mmc.1: Tuning map: 0x 000000ff mid: 0
  1023. [ 2.919264] B0 54 dw_mmc dw_mmc.1: data CRC error
  1024. [ 2.923097] B0 54 dw_mmc dw_mmc.1: data CRC error
  1025. [ 2.928076] B0 55 dw_mmc dw_mmc.1: Tuning map: 0x 000000bb mid: 0
  1026. [ 2.931676] B0 55 mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
  1027. [ 2.931737] B0 55 mmc1: new ultra high speed SDR104 SDIO card at address 0001
  1028. [ 3.050081] B0 54 ice4_fpga: barcode firmware update is NOT loaded
  1029. [ 3.050114] B0 54 ice4_fpga: CDONE_SUCCESS
  1030. [ 3.050140] B0 54 ice4_fpga: barcode firmware update success
  1031. [ 3.050176] B0 54 ice4_fpga: CDONE_SUCCESS
  1032. [ 3.050201] B0 54 ice4_fpga: CDONE_SUCCESS
  1033. [ 3.073955] B0 96 max77803-muic max77803-muic: func:max77803_muic_init_detect
  1034. [ 3.074518] B0 96 max77803-muic max77803-muic: func:max77803_muic_detect_dev CONTROL1:0
  1035. [ 3.075202] B0 96 max77803-muic max77803-muic: func:max77803_muic_detect_dev irq:-1 ret:0
  1036. [ 3.075242] B0 96 max77803-muic max77803-muic: max77803_muic_detect_dev: STATUS1:0x3f, 2:0x41
  1037. [ 3.075292] B0 96 max77803-muic max77803-muic: adc:1f adcerr:0 chgtyp:1 vb:40 dxovp:0 cable_type:19
  1038. [ 3.075339] B0 96 max77803-muic max77803-muic: max77803_muic_detect_dev: ATTACHED
  1039. [ 3.075378] B0 96 max77803-muic max77803-muic: func:max77803_muic_handle_attach st1:3f st2:41 cable_type:19
  1040. [ 3.075432] B0 96 max77803-muic max77803-muic: func:max77803_muic_attach_usb_type adc:1f cable_type:19
  1041. [ 3.075476] B0 96 max77803-muic max77803-muic: max77803_muic_attach_usb_type:USB
  1042. [ 3.075518] B0 96 max77803-muic max77803-muic: func:max77803_muic_set_charging_type force_disable:0
  1043. [ 3.075569] B0 96 [BATT] CB enabled(1), prev_cable(0)
  1044. [ 3.076120] B0 96 max77803_charger_unlock: unlocked state, return
  1045. [ 3.076676] B0 96 max77803_charger_unlock: unlocked state, return
  1046. [ 3.076711] B0 96 sec_bat_check_cable_result_callback set vbus applied
  1047. [ 3.076750] B0 96 max77803-muic max77803-muic: func:max77803_muic_set_usb_path path:0
  1048. [ 3.076832] B0 96 regulator regulator.2: func:max77803_reg_is_enabled
  1049. [ 3.076869] B0 96 regulator regulator.2: func:max77803_get_rid
  1050. [ 3.076899] B0 96 regulator regulator.2: func:max77803_get_enable_register
  1051. [ 3.077519] B0 96 regulator regulator.3: func:max77803_reg_is_enabled
  1052. [ 3.077557] B0 96 regulator regulator.3: func:max77803_get_rid
  1053. [ 3.077587] B0 96 regulator regulator.3: func:max77803_get_enable_register
  1054. [ 3.078168] B0 96 max77803-muic max77803-muic: max77803_muic_set_usb_path: AP_USB_MODE
  1055. [ 3.078213] B0 96 max77803-muic max77803-muic: max77803_muic_set_usb_path: Set manual path
  1056. [ 3.080657] B0 96 max77803-muic max77803-muic: max77803_muic_set_usb_path: CNTL1(0x09)
  1057. [ 3.081222] B0 96 max77803-muic max77803-muic: max77803_muic_set_usb_path: CNTL2(0x3e)
  1058. [ 3.081794] B0 54 max77803_charger_unlock: unlocked state, return
  1059. [ 3.082348] B0 54 max77803_charger_unlock: unlocked state, return
  1060. [ 3.084223] B0 54 max77803_set_charge_current: reg_data(0x8d), charge(460)
  1061. [ 3.087109] B0 54 max77803_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
  1062. [ 3.088048] B0 54 max77803_set_topoff_current: reg_data(0x24), topoff(200)
  1063. [ 3.088477] B0 54 sec-battery sec-battery: sec_bat_cable_work: Status:Charging, Sleep:No, Charging:Yes, Short Poll:Yes
  1064. [ 3.088531] B0 54 sec-battery sec-battery: sec_bat_cable_work: Polling time is reset to 30 sec.
  1065. [ 3.135248] B0 1 bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  1066. [ 3.135335] B0 1 bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  1067. [ 3.135365] B0 1 bus num (host idx)=1, slot num (rca)=1
  1068. [ 3.135393] B0 1 found adapter info 'DHD generic adapter'
  1069. [ 3.135475] B0 1 alloc static buf at e69c0000!
  1070. [ 3.140179] B0 1 F1 signature OK, socitype:0x1 chip:0x4335 rev:0x1 pkg:0x0
  1071. [ 3.140839] B0 1 DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
  1072. [ 3.141378] B1 1 wl_create_event_handler(): thread:wl_event_handler:75 started
  1073. [ 3.141816] B1 1 p2p0: P2P Interface Registered
  1074. [ 3.141886] B1 117 CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xe5fe4634
  1075. [ 3.141980] B1 1 dhd_attach(): thread:dhd_watchdog_thread:76 started
  1076. [ 3.142218] B1 1 dhd_attach(): thread:dhd_dpc:77 started
  1077. [ 3.142457] B1 1 dhd_attach(): thread:dhd_rxf:78 started
  1078. [ 3.142490] B1 1 dhd_deferred_work_init: work queue initialized
  1079. [ 3.142841] B0 1 Dongle Host Driver, version 1.141.64.13 (security_patch)
  1080. [ 3.142878] B0 1 Compiled in drivers/net/wireless/bcmdhd on Jul 20 2018 at 10:31:54
  1081. [ 3.143190] B0 1 Register interface [wlan0] MAC: 00:d3:77
  1082. [ 3.143221] B0 1
  1083. [ 3.143240] B0 1 dhd_prot_ioctl : bus is down. we have nothing to do
  1084. [ 3.143277] B0 1 dhd_wl_ioctl: WLC_IOCTL: cmd: 3, ret = -1
  1085. [ 3.143384] B0 1 wifi_platform_set_power = 0
  1086. [ 3.143411] B0 1 ####btlock released, cookie: WiFi
  1087. [ 3.143441] B0 1 check BCM4335, check_bcm4335_rev
  1088. [ 3.143481] B0 1 /data/.rev file open error
  1089. [ 3.143504] B0 1 ------------------------------------------------
  1090. [ 3.143537] B0 1 ------------------------------------------------
  1091. [ 3.143574] B0 1 brcm_wlan_power Enter: power off
  1092. [ 3.143601] B0 1 gpio_table = [2]
  1093. [ 3.143629] B0 1 WLAN: GPIO_WLAN_EN = 0
  1094. [ 3.244031] B0 1 ####ignore lock release, cookie mismatch: WiFi owner \xff\xff\xff\xff
  1095. [ 3.244079] B0 1 wl_android_post_init: btlock released
  1096. [ 3.244150] B0 1 ALSA device list:
  1097. [ 3.244175] B0 1 #0: AdonisUniv Sound Card
  1098. [ 3.244519] B0 1 Freeing init memory: 256K
  1099. [ 3.590346] B0 54 max77803_get_input_current: CHG_CNFG_09(0x17)
  1100. [ 3.590384] B0 54 sec_bat_get_current_average
  1101. [ 3.591812] B0 54 sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4161mV),Inow(460mA),SOC(90%),Tbat(317)
  1102. [ 3.592907] B0 54 max77803_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
  1103. [ 3.593467] B0 54 max77803_get_charger_state: CHG_DTLS : 0x 1
  1104. [ 3.593501] B0 54 sec-battery sec-battery: sec_bat_temperature: HT(600), HR(400), LT(-50), LR(0)
  1105. [ 3.593550] B0 54 sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
  1106. [ 3.593596] B0 54 sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1107. [ 3.593756] B0 54 sec-battery sec-battery: sec_bat_monitor_work: Call sec_bat_set_polling
  1108. [ 4.104018] B0 5 max77803_chgin_init_work
  1109. [ 5.820563] B0 277 EXT4-fs (mmcblk0p21): couldn't mount as ext3 due to feature incompatibilities
  1110. [ 5.869741] B1 277 EXT4-fs (mmcblk0p21): couldn't mount as ext2 due to feature incompatibilities
  1111. [ 5.922591] B3 277 EXT4-fs (mmcblk0p21): warning: maximal mount count reached, running e2fsck is recommended
  1112. [ 5.924298] B3 277 EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: (null)
  1113. [ 6.107209] B1 1 usb: enable_store enabled=0, !dev->enabled=1
  1114. [ 6.107242] B1 1 android_usb: already disabled
  1115. [ 6.111020] B1 1 usb: enable_store enabled=1, !dev->enabled=1
  1116. [ 6.111059] B1 1 usb: enable_store vendor=18d1,product=1,bcdDevice=233
  1117. [ 6.111095] B1 1 ,Class=0,SubClass=0,Protocol=0
  1118. [ 6.111121] B1 1 usb: enable_store next cmd : usb_add_config
  1119. [ 6.111157] B1 1 usb: usb_gadget_connect
  1120. [ 6.113977] B0 96 Initialize JPEG Hx driver
  1121. [ 6.117469] B0 96 exynos5-jpeg-hx exynos5-jpeg-hx: JPEG driver is registered to /dev/video14
  1122. [ 6.117591] B0 96 exynos5-jpeg-hx exynos5-jpeg-hx: JPEG driver is registered to /dev/video13
  1123. [ 6.119957] B2 1 usb: enable_store enabled=0, !dev->enabled=0
  1124. [ 6.119989] B2 1 usb: usb_gadget_disconnect
  1125. [ 6.120016] B2 1 usb: usb_remove_config cdev->config= (null), config=c0b88fe0
  1126. [ 6.120964] B2 1 usb: functions_store buff=rndis
  1127. [ 6.120993] B2 1 usb: android_enable_function name=rndis
  1128. [ 6.121167] B2 1 usb: enable_store enabled=1, !dev->enabled=1
  1129. [ 6.121198] B2 1 usb: enable_store f:rndis
  1130. [ 6.121225] B2 1 usb: enable_store vendor=18d1,product=d001,bcdDevice=233
  1131. [ 6.121260] B2 1 ,Class=0,SubClass=0,Protocol=0
  1132. [ 6.121286] B2 1 usb: enable_store next cmd : usb_add_config
  1133. [ 6.121316] B2 1 usb: android_bind_enabled_functions f:rndis
  1134. [ 6.121366] B2 1 android_usb gadget: using random self ethernet address
  1135. [ 6.121400] B2 1 usb: set unique host mac
  1136. [ 6.121735] B2 1 rndis0: MAC fe:14:d6:f3:d3:7d
  1137. [ 6.121761] B2 1 rndis0: HOST MAC 00:00:00:00:00:00
  1138. [ 6.121811] B2 1 usb: usb_string_id cdev(0xe63c9400)->next_string_id=5
  1139. [ 6.121845] B2 1 usb: usb_string_id cdev(0xe63c9400)->next_string_id=6
  1140. [ 6.121878] B2 1 usb: usb_string_id cdev(0xe63c9400)->next_string_id=7
  1141. [ 6.121917] B2 1 cpufreq locked
  1142. [ 6.121938] B2 1 usb: usb_gadget_connect
  1143. [ 6.125276] B0 387 ADDRCONF(NETDEV_UP): rndis0: link is not ready
  1144. [ 7.195072] B2 401 EXT4-fs (mmcblk0p21): re-mounted. Opts: (null)
  1145. [ 7.211123] B3 1 preinit: (7.20) Welcome to Sailfish OS 2.2.0.29 (Mouhijoki)
  1146. [ 7.211379] B3 1 watchdog: S3C2410 Watchdog: nowayout prevents watchdog to be stopped!
  1147. [ 7.211425] B3 1 watchdog: S3C2410 Watchdog: watchdog did not stop!
  1148. [ 7.217181] B3 1 preinit: (7.21) "Magic Close" /dev/watchdog with character 'V'
  1149. [ 7.234752] B3 1 preinit: (7.23) is_erase_needed: No : 0
  1150. [ 7.265891] B1 1 preinit: (7.26) get_bootstate: USER : 0
  1151. [ 7.266437] B1 1 preinit: (7.26) BOOTSTATE = USER
  1152. [ 7.267560] B1 1 preinit: (7.26) Booting to default.target
  1153. [ 7.589137] B2 1 systemd[1]: systemd 225 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  1154. [ 7.589409] B2 1 systemd[1]: Detected architecture arm.
  1155. [ 7.599690] B0 1 systemd[1]: Set hostname to <Sailfish>.
  1156. [ 7.699479] B1 1 systemd[1]: sys-fs-pstore.mount: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
  1157. [ 7.720370] B1 1 systemd[1]: [/lib/systemd/system/bluetooth.service:12] Invalid environment assignment, ignoring: $MGMT_DEBUG
  1158. [ 7.755420] B1 1 systemd[1]: sys-fs-pstore.mount: Cannot add dependency job, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'systemctl status sys-fs-pstore.mount' for details.
  1159. [ 7.757715] B1 1 systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  1160. [ 7.774145] B0 1 systemd[1]: Reached target Swap.
  1161. [ 7.784232] B0 1 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  1162. [ 7.799207] B0 1 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  1163. [ 7.814317] B0 1 systemd[1]: Created slice Root Slice.
  1164. [ 7.824230] B0 1 systemd[1]: Listening on Journal Audit Socket.
  1165. [ 7.834395] B0 1 systemd[1]: Listening on Journal Socket (/dev/log).
  1166. [ 7.849506] B0 1 systemd[1]: Created slice User and Session Slice.
  1167. [ 7.859175] B0 1 systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  1168. [ 7.874195] B0 1 systemd[1]: Listening on Journal Socket.
  1169. [ 7.884222] B0 1 systemd[1]: Listening on udev Control Socket.
  1170. [ 7.894156] B0 1 systemd[1]: Listening on udev Kernel Socket.
  1171. [ 7.904511] B0 1 systemd[1]: Created slice System Slice.
  1172. [ 7.915841] B0 1 systemd[1]: Starting Remount Root and Kernel File Systems...
  1173. [ 7.927096] B1 426 EXT4-fs (mmcblk0p21): re-mounted. Opts: (null)
  1174. [ 7.929951] B0 1 systemd[1]: Created slice system-serial\x2dgetty.slice.
  1175. [ 7.940925] B0 1 systemd[1]: Mounting Droid mount for /dev/cpuctl...
  1176. [ 7.976035] B0 1 systemd[1]: Mounting Droid mount for /dev/stune...
  1177. [ 7.990840] B0 1 systemd[1]: Mounting FFS mount...
  1178. [ 8.000796] B0 1 systemd[1]: Starting Journal Service...
  1179. [ 8.016002] B0 1 systemd[1]: Mounting Droid mount for /dev/bfqio...
  1180. [ 8.029661] B0 1 systemd[1]: Reached target Slices.
  1181. [ 8.041758] B0 1 systemd[1]: Mounting Debug File System...
  1182. [ 8.055422] B0 1 systemd[1]: Mounting Temporary Directory...
  1183. [ 8.065389] B0 1 systemd[1]: Mounting Droid mount for /dev/cpuset...
  1184. [ 8.075446] B0 1 systemd[1]: Starting Setup Virtual Console...
  1185. [ 8.087037] B0 1 systemd[1]: Mounted Debug File System.
  1186. [ 8.099193] B0 1 systemd[1]: Mounted FFS mount.
  1187. [ 8.109194] B0 1 systemd[1]: Mounted Temporary Directory.
  1188. [ 8.119127] B0 1 systemd[1]: Mounted Droid mount for /dev/bfqio.
  1189. [ 8.129521] B0 1 systemd[1]: Started Journal Service.
  1190. [ 8.934221] B2 434 systemd-journald[434]: Received request to flush runtime journal from PID 1
  1191. [ 9.189377] B2 447 max77803_get_charger_state: CHG_DTLS : 0x 1
  1192. [ 9.190451] B2 447 max77803_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
  1193. [ 9.191006] B2 447 max77803_get_charger_state: CHG_DTLS : 0x 1
  1194. [ 9.192082] B2 447 max77803_get_input_current: CHG_CNFG_09(0x17)
  1195. [ 9.279022] B2 447 max77803_get_charger_state: CHG_DTLS : 0x 1
  1196. [ 9.280148] B2 447 max77803_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
  1197. [ 9.280761] B2 447 max77803_get_charger_state: CHG_DTLS : 0x 1
  1198. [ 9.282657] B2 447 max77803_get_input_current: CHG_CNFG_09(0x17)
  1199. [ 9.528657] B0 24 audience_es325 4-003e: es325_firmware_ready:++
  1200. [ 9.528701] B0 24 audience_es325 4-003e: firmware request failed
  1201. [ 9.568374] B0 518 max77803_get_charger_state: CHG_DTLS : 0x 1
  1202. [ 9.569595] B0 518 max77803_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
  1203. [ 9.570195] B0 518 max77803_get_charger_state: CHG_DTLS : 0x 1
  1204. [ 9.571316] B0 518 max77803_get_input_current: CHG_CNFG_09(0x17)
  1205. [ 9.603476] B2 517 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_start_device already power on
  1206. [ 9.629468] B1 517 [TSP] synaptics_power off
  1207. [ 9.656725] B0 57 ALSA device list:
  1208. [ 9.657774] B1 536 EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: (null)
  1209. [ 9.674389] B1 539 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  1210. [ 9.714566] B3 14 sec_touchkey_driver 8-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x0, failed.
  1211. [ 9.779582] B3 14 sec_touchkey_driver 8-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
  1212. [ 9.916253] B3 14 sec_touchkey_driver 8-0020: touchkey_ta_setting: TA connected!!!
  1213. [ 10.458969] B1 571 usb: enable_show dev->enabled=1
  1214. [ 10.459050] B1 571 usb: enable_store enabled=1, !dev->enabled=0
  1215. [ 10.459082] B1 571 android_usb: already enabled
  1216. [ 10.465169] B1 571 usb: enable_show dev->enabled=1
  1217. [ 10.465278] B1 571 usb: enable_store enabled=0, !dev->enabled=0
  1218. [ 10.465455] B1 571 usb: usb_gadget_disconnect
  1219. [ 10.465485] B1 571 usb: usb_remove_config cdev->config= (null), config=c0b88fe0
  1220. [ 10.465528] B1 571 cpufreq unlock
  1221. [ 10.484278] B0 554 [TSP] synaptics_power on
  1222. [ 10.494267] B1 571 usb: functions_show enabled_func=rndis
  1223. [ 10.494363] B1 571 usb: functions_store buff=rndis
  1224. [ 10.494395] B1 571 usb: android_enable_function name=rndis
  1225. [ 10.494570] B1 571 usb: enable_show dev->enabled=0
  1226. [ 10.494662] B1 571 usb: enable_store enabled=1, !dev->enabled=1
  1227. [ 10.494693] B1 571 usb: enable_store f:rndis
  1228. [ 10.494721] B1 571 usb: enable_store vendor=18d1,product=a02,bcdDevice=233
  1229. [ 10.494755] B1 571 ,Class=0,SubClass=0,Protocol=0
  1230. [ 10.494780] B1 571 usb: enable_store next cmd : usb_add_config
  1231. [ 10.494810] B1 571 usb: android_bind_enabled_functions f:rndis
  1232. [ 10.494864] B1 571 android_usb gadget: using random self ethernet address
  1233. [ 10.494907] B1 571 usb: set unique host mac
  1234. [ 10.495401] B1 571 rndis0: MAC 8e:cc:6a:a7:86:ab
  1235. [ 10.495438] B1 571 rndis0: HOST MAC 02:51:33:61:30:60
  1236. [ 10.495505] B1 571 cpufreq locked
  1237. [ 10.495533] B1 571 usb: usb_gadget_connect
  1238. [ 10.518091] B0 583 ADDRCONF(NETDEV_UP): rndis0: link is not ready
  1239. [ 10.529648] B0 57 sec_touchkey_driver 8-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x0, failed.
  1240. [ 10.546991] B1 581 droid-hal-init: init first stage started!
  1241. [ 10.548311] B2 581 droid-hal-init: init second stage started!
  1242. [ 10.553886] B2 581 droid-hal-init: Failed to initialize property area
  1243. [ 10.569484] B0 554 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_glove_mode_enables: [00]: glove disable
  1244. [ 10.569699] B0 554 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_f51_set_init: proximity controls:[0X51]
  1245. [ 10.570288] B0 554 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_f51_set_custom_rezero
  1246. [ 10.602018] B0 57 sec_touchkey_driver 8-0020: cypress_touchkey_interrupt_set_dual: interrupt set: 0x1
  1247. [ 10.604084] B0 24 max77803-muic max77803-muic: func:max77803_muic_usb_detect info->muic_data->sw_path:0
  1248. [ 10.604695] B0 24 max77803-muic max77803-muic: func:max77803_muic_read_otg_id ret:31 val:3f adc1k:0
  1249. [ 10.604744] B0 24 max77803_check_id_state: id state = 1
  1250. [ 10.604777] B0 24 max77803_set_vbus_state: vbus state = 1
  1251. [ 10.604812] B0 24 usb: exynos_drd_switch_handle_vbus drd_switch->id_state: 1, drd_switch->vbus_active: 0, vbus_active: 1
  1252. [ 10.604871] B0 24 max77803_muic_usb_cb - USB_CABLE_ATTACHED
  1253. [ 10.631593] B2 597 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  1254. [ 10.631881] B2 597 s2mps11_rtc_read_time: 2018/5/29 16:4:33(0)
  1255. [ 10.631938] B2 597 s2mps11_rtc_set_time: 2018/5/29 16:4:34(0)
  1256. [ 10.633445] B2 597 s2mps11_rtc_set_time_reg: WUDR RUDR check(0x10) alarm_enable(0x0)
  1257. [ 10.634867] B2 597 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  1258. [ 10.635154] B2 597 s2mps11_rtc_read_time: 2018/5/29 16:4:35(0)
  1259. [ 10.636434] B2 597 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  1260. [ 10.636719] B2 597 s2mps11_rtc_read_time: 2018/5/29 16:4:35(0)
  1261. [ 10.636750] B2 597 s2mps11_rtc_set_alarm: 2018/5/29 16:4:36(2)
  1262. [ 10.638027] B2 597 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  1263. [ 10.638794] B2 597 s2mps11_rtc_stop_alarm: 2018/5/29 15:37:4(2)
  1264. [ 10.640356] B2 597 s2mps11_rtc_set_time_reg: WUDR RUDR check(0x11) alarm_enable(0x1)
  1265. [ 10.641869] B2 597 s2mps11_rtc_set_time_reg: WUDR RUDR check(0x11) alarm_enable(0x1)
  1266. [ 10.642163] B2 597 s2mps11_rtc_start_alarm: 2018/5/29 16:4:36(2)
  1267. [ 10.643668] B2 597 s2mps11_rtc_set_time_reg: WUDR RUDR check(0x11) alarm_enable(0x1)
  1268. [ 10.645250] B2 11 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  1269. [ 10.645552] B2 11 s2mps11_rtc_read_time: 2018/5/29 16:4:35(0)
  1270. [ 10.647709] B2 11 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  1271. [ 10.648034] B2 11 s2mps11_rtc_read_time: 2018/5/29 16:4:35(0)
  1272. [ 10.648083] B2 11 s2mps11_rtc_set_alarm: 2018/5/29 16:4:36(2)
  1273. [ 10.649418] B2 11 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  1274. [ 10.650246] B2 11 s2mps11_rtc_stop_alarm: 2018/5/29 16:4:36(2)
  1275. [ 10.651822] B2 11 s2mps11_rtc_set_time_reg: WUDR RUDR check(0x11) alarm_enable(0x1)
  1276. [ 10.653394] B2 11 s2mps11_rtc_set_time_reg: WUDR RUDR check(0x11) alarm_enable(0x1)
  1277. [ 10.653719] B2 11 s2mps11_rtc_start_alarm: 2018/5/29 16:4:36(2)
  1278. [ 10.655304] B2 11 s2mps11_rtc_set_time_reg: WUDR RUDR check(0x11) alarm_enable(0x1)
  1279. [ 10.674058] B0 554 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_f51_set_enables: disable[0x82]
  1280. [ 10.674307] B0 554 synaptics_rmi4_i2c 0-0020: synaptics_rmi4_reinit_device: Interrupt enable mask register[0] = 0x24
  1281. [ 10.699312] B0 554 lcd panel: brightness=142, bl=40, candela=134
  1282. [ 10.741151] B0 57 sec_touchkey_driver 8-0020: touchkey_ta_setting: TA connected!!!
  1283. [ 10.755188] B0 567 max77803_get_charger_state: CHG_DTLS : 0x 1
  1284. [ 10.756356] B0 567 max77803_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
  1285. [ 10.756980] B0 567 max77803_get_charger_state: CHG_DTLS : 0x 1
  1286. [ 10.758093] B0 567 max77803_get_input_current: CHG_CNFG_09(0x17)
  1287. [ 10.782709] B0 554 lcd panel: brightness=161, bl=42, candela=152
  1288. [ 10.799393] B0 554 lcd panel: brightness=162, bl=43, candela=162
  1289. [ 11.104152] B0 5 usb: exynos-ss-udc read original PHYPARAM0 : 0x24d4e6e4
  1290. [ 11.104196] B0 5 usb: exynos-ss-udc modified PHYPARAM0 : 0x26d4e6e4
  1291. [ 11.142281] B1 90 [get_timestamp][irqdiff=11132775548] Event time diff is too large for 6 sensor
  1292. [ 11.142346] B1 90 [SSP]: MSG From MCU - Init
  1293. [ 11.142371] B1 90 Gyro Temp Init
  1294. [ 11.142391] B1 90 CheckLightLux Init
  1295. [ 11.142412] B1 90 IWE 7 -1
  1296. [ 11.142429] B1 90 IWE 7 -1
  1297. [ 11.142446] B1 90 IWE 7 -1
  1298. [ 11.142463] B1 90 Adonis
  1299. [ 11.142479] B1 90 AD 6 1 0 1
  1300. [ 11.183073] B0 554 lcd panel: brightness=161, bl=42, candela=152
  1301. [ 11.363671] B0 0 usb: GET_DES
  1302. [ 11.363721] B0 57 usb: android_work config= (null),connected=1,sw_connected=0
  1303. [ 11.364552] B0 57 usb: android_work sent uevent USB_STATE=CONNECTED
  1304. [ 11.506700] B0 0 usb: GET_DES
  1305. [ 11.510689] B0 0 usb: set_config_number single config num=0
  1306. [ 11.510727] B0 0 usb: set_interface_count next_interface_id=2
  1307. [ 11.514704] B0 0 usb: set_config_number single config num=0
  1308. [ 11.514741] B0 0 usb: set_interface_count next_interface_id=2
  1309. [ 11.542676] B0 0 android_usb gadget: high-speed config #1: android
  1310. [ 11.542716] B0 0 usb: set_config e rndis[0]
  1311. [ 11.542757] B0 0 usb: set_config e rndis[1]
  1312. [ 11.542851] B0 0 usb: SET_CON
  1313. [ 11.543108] B0 57 ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
  1314. [ 11.543246] B0 57 usb: android_work config=c0b88fe0,connected=1,sw_connected=1
  1315. [ 11.543313] B0 57 usb: android_work sent uevent USB_STATE=CONFIGURED
  1316. [ 11.569013] B0 54 [SSP]: debug_work_func(1) - Sensor state: 0x1fff, RC: 0, MS: 0
  1317. [ 11.601975] B1 597 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  1318. [ 11.602271] B1 597 s2mps11_rtc_read_time: 2018/5/29 16:4:35(0)
  1319. [ 11.927328] B1 643 warning: `ofonod' uses 32-bit capabilities (legacy support in use)
  1320. [ 12.375163] B1 597 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  1321. [ 12.375452] B1 597 s2mps11_rtc_read_time: 2018/5/29 16:4:36(0)
  1322. [ 12.906364] B0 707 droid-hal-init: init first stage started!
  1323. [ 12.907835] B1 707 droid-hal-init: init second stage started!
  1324. [ 12.908561] B1 707 droid-hal-init: Failed to initialize property area
  1325. [ 13.455520] B1 733 PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet. [4674, ../../../../../../kernel/samsung/exynos5410/drivers/gpu/pvr/services4/srvkm/bridged/bridged_pvr_bridge.c]
  1326. [ 13.600520] B2 54 max77803_get_input_current: CHG_CNFG_09(0x17)
  1327. [ 13.600558] B2 54 sec_bat_get_current_average
  1328. [ 13.602844] B2 54 sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4055mV),Inow(460mA),SOC(90%),Tbat(317)
  1329. [ 13.604497] B2 54 max77803_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
  1330. [ 13.605182] B2 54 max77803_get_charger_state: CHG_DTLS : 0x 1
  1331. [ 13.605223] B2 54 sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1332. [ 13.605388] B2 54 sec-battery sec-battery: sec_bat_monitor_work: Call sec_bat_set_polling
  1333. [ 13.930347] B0 794 PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet. [4674, ../../../../../../kernel/samsung/exynos5410/drivers/gpu/pvr/services4/srvkm/bridged/bridged_pvr_bridge.c]
  1334. [ 14.168420] B2 810 wm5102-codec wm5102-codec: set_lhpf1_coeff: lhpf1 mode=1, val=0xf04b
  1335. [ 14.168494] B2 810 wm5102-codec wm5102-codec: set_lhpf2_coeff: lhpf2 mode=1, val=0xf04b (e5d6e200)
  1336. [ 14.186178] B1 861 wm5102-codec wm5102-codec: aif1: 2ch, 48000Hz, 2048bytes
  1337. [ 14.186706] B0 58 arizona spi2.0: Spurious HPDET IRQ
  1338. [ 14.187631] B0 58 arizona spi2.0: Mixer dropped sample
  1339. [ 14.195100] B1 861 I:P:DmaAddr=@3000004 Total=2048 PrdSz=1024 #Prds=2 dma_area=0xe7bc0004
  1340. [ 14.203785] B3 54 wm5102-card wm5102-card: adonisuniv_set_bias_level: 1
  1341. [ 14.203823] B3 54 wm5102-card wm5102-card: adonisuniv_set_bias_level_post: 1
  1342. [ 14.204195] B3 54 wm5102-card wm5102-card: adonisuniv_set_bias_level: 2
  1343. [ 14.205803] B3 54 wm5102-card wm5102-card: adonisuniv_set_bias_level_post: 2
  1344. [ 14.207383] B3 5 wm5102-card wm5102-card: adonisuniv_set_bias_level: 3
  1345. [ 14.207450] B3 5 wm5102-card wm5102-card: adonisuniv_set_bias_level_post: 3
  1346. [ 14.208522] B0 58 arizona spi2.0: ASRC underclocked
  1347. [ 15.246748] B0 861 wm5102-card wm5102-card: adonisuniv_wm5102_aif1_hw_free
  1348. [ 15.317302] B2 886 droid-hal-init: init first stage started!
  1349. [ 15.319685] B1 886 droid-hal-init: init second stage started!
  1350. [ 15.320766] B1 886 droid-hal-init: Failed to initialize property area
  1351. [ 15.468277] B3 885 PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet. [4674, ../../../../../../kernel/samsung/exynos5410/drivers/gpu/pvr/services4/srvkm/bridged/bridged_pvr_bridge.c]
  1352. [ 16.252454] B0 5 wm5102-card wm5102-card: adonisuniv_set_bias_level: 2
  1353. [ 16.252497] B0 5 wm5102-card wm5102-card: adonisuniv_set_bias_level_post: 2
  1354. [ 16.252782] B0 5 wm5102-card wm5102-card: adonisuniv_set_bias_level: 1
  1355. [ 16.252822] B0 5 wm5102-card wm5102-card: adonisuniv_set_bias_level_post: 1
  1356. [ 16.252984] B0 5 wm5102-card wm5102-card: adonisuniv_set_bias_level: 0
  1357. [ 16.253023] B0 5 wm5102-card wm5102-card: adonisuniv_set_bias_level_post: 0
  1358. [ 16.948210] B1 910 PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet. [4674, ../../../../../../kernel/samsung/exynos5410/drivers/gpu/pvr/services4/srvkm/bridged/bridged_pvr_bridge.c]
  1359. [ 17.604030] B0 57 max77803-muic max77803-muic: func:max77803_muic_dock_usb_detect info->muic_data->sw_path:0
  1360. [ 17.604633] B0 57 max77803-muic max77803-muic: func:max77803_muic_read_otg_id ret:31 val:3f adc1k:0
  1361. [ 17.604684] B0 57 max77803_check_id_state: id state = 1
  1362. [ 18.406908] B1 912 PVR_K:(Error): BridgedDispatchKM: Driver initialisation not completed yet. [4674, ../../../../../../kernel/samsung/exynos5410/drivers/gpu/pvr/services4/srvkm/bridged/bridged_pvr_bridge.c]
  1363. [ 21.167165] B1 90 [get_timestamp][irqdiff=10029821842] Event time diff is too large for 6 sensor
  1364. [ 21.369363] B1 597 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  1365. [ 21.369659] B1 597 s2mps11_rtc_read_time: 2018/5/29 16:4:45(0)
  1366. [ 21.613971] B0 0 rndis0: no IPv6 routers present
  1367. [ 22.563989] B0 5 [SSP]: debug_work_func(1) - Sensor state: 0x1fff, RC: 0, MS: 0
  1368. [ 22.614552] B1 597 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  1369. [ 22.614847] B1 597 s2mps11_rtc_read_time: 2018/5/29 16:4:46(0)
  1370. [ 23.616090] B2 5 max77803_get_input_current: CHG_CNFG_09(0x17)
  1371. [ 23.616127] B2 5 sec_bat_get_current_average
  1372. [ 23.617705] B0 5 sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4211mV),Inow(460mA),SOC(90%),Tbat(317)
  1373. [ 23.618834] B0 5 max77803_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
  1374. [ 23.619441] B0 5 max77803_get_charger_state: CHG_DTLS : 0x 1
  1375. [ 23.619480] B0 5 sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1376. [ 23.619653] B0 5 sec-battery sec-battery: sec_bat_monitor_work: Call sec_bat_set_polling
  1377. [ 23.626747] B2 607 max77803_get_charger_state: CHG_DTLS : 0x 1
  1378. [ 23.627904] B2 607 max77803_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
  1379. [ 23.628484] B2 607 max77803_get_charger_state: CHG_DTLS : 0x 1
  1380. [ 23.629679] B2 607 max77803_get_input_current: CHG_CNFG_09(0x17)
  1381. [ 25.604012] B0 57 max77803-muic max77803-muic: func:max77803_muic_mhl_detect cable_type:1
  1382. [ 31.197021] B1 90 [get_timestamp][irqdiff=10029854684] Event time diff is too large for 6 sensor
  1383. [ 31.399282] B1 597 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  1384. [ 31.399578] B1 597 s2mps11_rtc_read_time: 2018/5/29 16:4:55(0)
  1385. [ 33.563988] B0 5 [SSP]: debug_work_func(1) - Sensor state: 0x1fff, RC: 0, MS: 0
  1386. [ 33.626028] B0 5 max77803_get_input_current: CHG_CNFG_09(0x17)
  1387. [ 33.626065] B0 5 sec_bat_get_current_average
  1388. [ 33.627554] B0 5 sec-battery sec-battery: sec_bat_get_battery_info:Vnow(4213mV),Inow(460mA),SOC(90%),Tbat(317)
  1389. [ 33.629642] B0 5 max77803_get_vbus_state: VBUS is valid. CHGIN < CHGIN_OVLO
  1390. [ 33.630221] B0 5 max77803_get_charger_state: CHG_DTLS : 0x 1
  1391. [ 33.630263] B0 5 sec-battery sec-battery: sec_bat_temperature: HT(600), HR(400), LT(-50), LR(0)
  1392. [ 33.630314] B0 5 sec-battery sec-battery: sec_bat_fullcharged_check: Charging Mode : Normal
  1393. [ 33.630364] B0 5 sec-battery sec-battery: sec_bat_monitor_work: Status(Charging), mode(Normal), Health(Good), Cable(4), siop_level(100)
  1394. [ 33.630544] B0 5 sec-battery sec-battery: sec_bat_monitor_work: Call sec_bat_set_polling
  1395. [ 34.614791] B1 597 s2mps11_rtc_read_time_reg: RUDR check(0x1)
  1396. [ 34.615088] B1 597 s2mps11_rtc_read_time: 2018/5/29 16:4:58(0)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!