Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2020.10-2 (Nov 05 2020 - 18:40:12 +0000) Manjaro Linux ARM
- CPU: Allwinner A64 (SUN50I)
- Model: Pine64 PinePhone (1.2)
- DRAM: 3 GiB
- MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
- Loading Environment from FAT... *** Warning - bad CRC, using default environment
- In: serial
- Out: serial
- Err: serial
- Net: No ethernet found.
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc1(part 0) is current device
- Scanning mmc 1:1...
- Found /extlinux/extlinux.conf
- Retrieving file: /extlinux/extlinux.conf
- 207 bytes read in 10 ms (19.5 KiB/s)
- 1: Manjaro ARM
- Retrieving file: /initramfs-linux.img
- 8435539 bytes read in 371 ms (21.7 MiB/s)
- Retrieving file: /Image
- 18237448 bytes read in 795 ms (21.9 MiB/s)
- append: initrd=/initramfs-linux.img console=tty1 console=ttyS0,115200 root=LABEL=ROOT_MNJRO rw rootwait bootsplash.bootfile=bootsplash-themes/manjaro/bootsplash
- Retrieving file: /extlinux/../dtbs/allwinner/sun50i-a64-pinephone-1.2.dtb
- 48548 bytes read in 33 ms (1.4 MiB/s)
- Moving Image from 0x40080000 to 0x40200000, end=413d0000
- ## Flattened Device Tree blob at 4fa00000
- Booting using the fdt blob at 0x4fa00000
- Loading Ramdisk to 497f4000, end 49fff753 ... OK
- Loading Device Tree to 00000000497e5000, end 00000000497f3da3 ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.9.1-9-MANJARO-ARM (gitlab-runner@odroid-n2plus-pm) (gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 SMP Wed Nov 4 14:07:57 CET 2020
- [ 0.000000] Machine model: Pine64 PinePhone (1.2)
- [ 0.000000] cma: Reserved 256 MiB at 0x00000000f0000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000ffffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0xef9c4100-0xef9c5fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff]
- [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000ffffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000ffffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.2
- [ 0.000000] percpu: Embedded 22 pages/cpu s52184 r8192 d29736 u90112
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] CPU features: detected: ARM erratum 843419
- [ 0.000000] Speculative Store Bypass Disable mitigation not required
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 774144
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: initrd=/initramfs-linux.img console=tty1 console=ttyS0,115200 root=LABEL=ROOT_MNJRO rw rootwait bootsplash.bootfile=bootsplash-themes/manjaro/bootsplash
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] software IO TLB: mapped [mem 0x7bfff000-0x7ffff000] (64MB)
- [ 0.000000] Memory: 2729084K/3145728K available (11454K kernel code, 722K rwdata, 3536K rodata, 2048K init, 387K bss, 154500K reserved, 262144K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] random: get_random_bytes called from start_kernel+0x304/0x4cc with crng_init=0
- [ 0.000000] arch_timer: Enabling global workaround for Allwinner erratum UNKNOWN1
- [ 0.000000] arch_timer: CPU0: Trapping CNTVCT access
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000434] Console: colour dummy device 80x25
- [ 0.000803] printk: console [tty1] enabled
- [ 0.000906] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
- [ 0.000930] pid_max: default: 32768 minimum: 301
- [ 0.001029] LSM: Security Framework initializing
- [ 0.001126] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.001170] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.002940] rcu: Hierarchical SRCU implementation.
- [ 0.004636] smp: Bringing up secondary CPUs ...
- [ 5.093794] CPU1: failed to come online
- [ 5.093811] CPU1: failed in unknown state : 0x0
- [ 10.219350] CPU2: failed to come online
- [ 10.219365] CPU2: failed in unknown state : 0x0
- [ 15.344853] CPU3: failed to come online
- [ 15.344867] CPU3: failed in unknown state : 0x0
- [ 15.344926] smp: Brought up 1 node, 1 CPU
- [ 15.344938] SMP: Total of 1 processors activated.
- [ 15.344957] CPU features: detected: 32-bit EL0 Support
- [ 15.344973] CPU features: detected: CRC32 instructions
- [ 15.344988] CPU features: detected: 32-bit EL1 Support
- [ 15.359203] CPU: All CPU(s) started at EL2
- [ 15.359237] alternatives: patching kernel code
- [ 15.361469] devtmpfs: initialized
- [ 15.370730] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 15.370782] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 15.380241] pinctrl core: initialized pinctrl subsystem
- [ 15.383693] NET: Registered protocol family 16
- [ 15.385197] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
- [ 15.385319] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 15.385531] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 15.386248] thermal_sys: Registered thermal governor 'fair_share'
- [ 15.386251] thermal_sys: Registered thermal governor 'bang_bang'
- [ 15.386266] thermal_sys: Registered thermal governor 'step_wise'
- [ 15.386278] thermal_sys: Registered thermal governor 'power_allocator'
- [ 15.386708] cpuidle: using governor menu
- [ 15.386873] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 15.391237] ASID allocator initialised with 65536 entries
- [ 15.392526] Serial: AMBA PL011 UART driver
- [ 15.506953] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 15.506991] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 15.507005] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 15.507019] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 15.508340] cryptd: max_cpu_qlen set to 1000
- [ 15.516974] iommu: Default domain type: Translated
- [ 15.517448] SCSI subsystem initialized
- [ 15.517742] usbcore: registered new interface driver usbfs
- [ 15.517803] usbcore: registered new interface driver hub
- [ 15.517872] usbcore: registered new device driver usb
- [ 15.518546] mc: Linux media interface: v0.10
- [ 15.518594] videodev: Linux video capture interface: v2.00
- [ 15.518638] pps_core: LinuxPPS API ver. 1 registered
- [ 15.518649] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 15.518679] PTP clock support registered
- [ 15.518876] EDAC MC: Ver: 3.0.0
- [ 15.529856] clocksource: Switched to clocksource arch_sys_counter
- [ 15.530142] VFS: Disk quotas dquot_6.6.0
- [ 15.530218] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 15.552687] NET: Registered protocol family 2
- [ 15.553167] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
- [ 15.553248] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 15.553564] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
- [ 15.554387] TCP: Hash tables configured (established 32768 bind 32768)
- [ 15.554565] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 15.554685] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 15.554954] NET: Registered protocol family 1
- [ 15.557417] RPC: Registered named UNIX socket transport module.
- [ 15.557438] RPC: Registered udp transport module.
- [ 15.557449] RPC: Registered tcp transport module.
- [ 15.557459] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 15.557677] Trying to unpack rootfs image as initramfs...
- [ 16.014970] Freeing initrd memory: 8236K
- [ 16.015775] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
- [ 16.016419] kvm [1]: IPA Size Limit: 40bits
- [ 16.017197] kvm [1]: vgic interrupt IRQ1
- [ 16.017315] kvm [1]: Hyp mode initialized successfully
- [ 16.022173] Initialise system trusted keyrings
- [ 16.024820] workingset: timestamp_bits=44 max_order=20 bucket_order=0
- [ 16.030888] zbud: loaded
- [ 16.032327] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 16.033900] NFS: Registering the id_resolver key type
- [ 16.033945] Key type id_resolver registered
- [ 16.033956] Key type id_legacy registered
- [ 16.034064] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 16.034745] fuse: init (API version 7.31)
- [ 16.035119] 9p: Installing v9fs 9p2000 file system support
- [ 16.087834] Key type asymmetric registered
- [ 16.087854] Asymmetric key parser 'x509' registered
- [ 16.087915] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 16.087933] io scheduler mq-deadline registered
- [ 16.087945] io scheduler kyber registered
- [ 16.088738] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device
- [ 16.089857] sun4i-usb-phy 1c19400.phy: failed to get clock usb0_phy
- [ 16.092760] sun6i-mipi-dphy 1ca1000.d-phy: Couldn't create the DPHY encoder regmap
- [ 16.098873] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
- [ 16.100349] sun50i-a64-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator
- [ 16.148883] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 16.158198] sun6i-mipi-dsi 1ca0000.dsi: Couldn't get VCC-DSI supply
- [ 16.180354] loop: module loaded
- [ 16.182664] libphy: Fixed MDIO Bus: probed
- [ 16.183061] tun: Universal TUN/TAP device driver, 1.6
- [ 16.195598] VFIO - User Level meta-driver version: 0.3
- [ 16.197030] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 16.197050] ehci-platform: EHCI generic platform driver
- [ 16.197365] ehci-platform 1c1a000.usb: EHCI Host Controller
- [ 16.197402] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
- [ 16.197550] ehci-platform 1c1a000.usb: irq 20, io mem 0x01c1a000
- [ 16.209803] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
- [ 16.210712] hub 1-0:1.0: USB hub found
- [ 16.210808] hub 1-0:1.0: 1 port detected
- [ 16.211934] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 16.211974] ohci-platform: OHCI generic platform driver
- [ 16.212224] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
- [ 16.212258] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
- [ 16.212427] ohci-platform 1c1a400.usb: irq 21, io mem 0x01c1a400
- [ 16.274590] hub 2-0:1.0: USB hub found
- [ 16.274689] hub 2-0:1.0: 1 port detected
- [ 16.276396] usbcore: registered new interface driver usb-storage
- [ 16.278477] file system registered
- [ 16.286302] sun6i-rtc 1f00000.rtc: registered as rtc0
- [ 16.286362] sun6i-rtc 1f00000.rtc: setting system clock to 2020-11-05T19:17:36 UTC (1604603856)
- [ 16.286382] sun6i-rtc 1f00000.rtc: RTC enabled
- [ 16.286610] i2c /dev entries driver
- [ 16.291372] sun8i-di 1e00000.deinterlace: Device registered as /dev/video0
- [ 16.295406] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
- [ 16.296720] sdhci: Secure Digital Host Controller Interface driver
- [ 16.296741] sdhci: Copyright(c) Pierre Ossman
- [ 16.296893] Synopsys Designware Multimedia Card Interface Driver
- [ 16.298024] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 16.306297] ledtrig-cpu: registered to indicate activity on CPUs
- [ 16.307153] SMCCC: SOC_ID: ARCH_SOC_ID(0) returned error: ffffffffffffffff
- [ 16.307233] hid: raw HID events driver (C) Jiri Kosina
- [ 16.308370] usbcore: registered new interface driver usbhid
- [ 16.308385] usbhid: USB HID core driver
- [ 16.311142] cedrus 1c0e000.video-codec: Device registered as /dev/video1
- [ 16.319059] ashmem: initialized
- [ 16.326337] NET: Registered protocol family 17
- [ 16.326520] 9pnet: Installing 9P2000 support
- [ 16.326573] Key type dns_resolver registered
- [ 16.328236] registered taskstats version 1
- [ 16.328260] Loading compiled-in X.509 certificates
- [ 16.328361] zswap: loaded using pool lzo/zbud
- [ 16.347859] sun8i-rotate 1020000.rotate: Device registered as /dev/video2
- [ 16.352764] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
- [ 16.356014] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found
- [ 16.358473] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input1
- [ 16.364467] axp20x-adc axp813-adc: DMA mask not set
- [ 16.368684] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
- [ 16.377690] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set
- [ 16.380312] dcdc1: supplied by regulator-dummy
- [ 16.380790] dcdc2: supplied by regulator-dummy
- [ 16.381152] dcdc4: supplied by regulator-dummy
- [ 16.381505] dcdc5: supplied by regulator-dummy
- [ 16.381902] dcdc6: supplied by regulator-dummy
- [ 16.382285] dc1sw: supplied by regulator-dummy
- [ 16.382526] aldo1: supplied by regulator-dummy
- [ 16.382717] dovdd-csi: Bringing 3300000uV into 1800000-1800000uV
- [ 16.382866] random: fast init done
- [ 16.383471] aldo2: supplied by regulator-dummy
- [ 16.383880] aldo3: supplied by regulator-dummy
- [ 16.384388] dldo1: supplied by regulator-dummy
- [ 16.384915] dldo2: supplied by regulator-dummy
- [ 16.385400] dldo3: supplied by regulator-dummy
- [ 16.386029] dldo4: supplied by regulator-dummy
- [ 16.386406] eldo1: supplied by regulator-dummy
- [ 16.387008] eldo2: supplied by regulator-dummy
- [ 16.387362] eldo3: supplied by regulator-dummy
- [ 16.387485] dvdd-1v8-csi: Bringing 700000uV into 1800000-1800000uV
- [ 16.387890] fldo1: supplied by regulator-dummy
- [ 16.388218] fldo2: supplied by regulator-dummy
- [ 16.388603] rtc-ldo: supplied by regulator-dummy
- [ 16.388856] ldo-io0: supplied by regulator-dummy
- [ 16.390524] ldo-io1: supplied by regulator-dummy
- [ 16.390812] vcc-1v8-typec: Bringing 3300000uV into 1800000-1800000uV
- [ 16.391481] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
- [ 16.401370] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- [ 16.405917] printk: console [ttyS0] disabled
- [ 16.406031] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 32, base_baud = 1500000) is a 16550A
- [ 17.661710] printk: console [ttyS0] enabled
- [ 17.669252] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 33, base_baud = 1500000) is a 16550A
- [ 17.678221] serial serial0: tty port ttyS1 registered
- [ 17.686034] 1c28c00.serial: ttyS2 at MMIO 0x1c28c00 (irq = 34, base_baud = 1500000) is a 16550A
- [ 17.726640] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800010bdfc38)
- [ 17.735990] sun4i-drm display-engine: bound 1200000.mixer (ops 0xffff800010bdfc38)
- [ 17.744036] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
- [ 17.751889] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xffff800010bdb358)
- [ 17.760449] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xffff800010bdb358)
- [ 17.768836] sun4i-drm display-engine: bound 1ca0000.dsi (ops 0xffff800010bdeb60)
- [ 17.779511] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
- [ 17.789743] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
- [ 17.797766] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xffff800010bdeef8)
- [ 17.807030] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
- [ 17.814906] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
- [ 17.822781] ehci-platform 1c1b000.usb: EHCI Host Controller
- [ 17.828390] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
- [ 17.836289] ehci-platform 1c1b000.usb: irq 22, io mem 0x01c1b000
- [ 17.842958] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
- [ 17.857922] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
- [ 17.864896] hub 3-0:1.0: USB hub found
- [ 17.869046] hub 3-0:1.0: 1 port detected
- [ 17.874316] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
- [ 17.880971] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4
- [ 17.888905] ohci-platform 1c1b400.usb: irq 23, io mem 0x01c1b400
- [ 17.958642] hub 4-0:1.0: USB hub found
- [ 17.962839] hub 4-0:1.0: 1 port detected
- [ 17.968095] usb_phy_generic usb_phy_generic.3.auto: supply vcc not found, using dummy regulator
- [ 17.977800] musb-hdrc musb-hdrc.4.auto: MUSB HDRC host driver
- [ 17.983583] musb-hdrc musb-hdrc.4.auto: new USB bus registered, assigned bus number 5
- [ 17.991951] phy id_det change to device
- [ 17.998781] hub 5-0:1.0: USB hub found
- [ 18.002963] hub 5-0:1.0: 1 port detected
- [ 18.009002] input: gpio-vibrator as /devices/platform/vibrator/input/input2
- [ 18.127280] Goodix-TS 1-005d: ID 917S, version: 0200
- [ 18.134669] Goodix-TS 1-005d: Direct firmware load for goodix_917S_cfg.bin failed with error -2
- [ 18.165488] sunxi-mmc 1c0f000.mmc: Got CD GPIO
- [ 18.170886] input: Goodix Capacitive TouchScreen as /devices/platform/soc/1c2ac00.i2c/i2c-1/1-005d/input/input3
- [ 18.197242] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
- [ 18.209354] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
- [ 18.237814] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
- [ 18.266205] mmc1: new high speed SDIO card at address 0001
- [ 18.273809] sunxi-mmc 1c11000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
- [ 18.308700] scpi_protocol scpi: incorrect or no SCP firmware found
- [ 18.314984] scpi_protocol: probe of scpi failed with error -62
- [ 18.321880] usb0-vbus: supplied by vcc5v0
- [ 18.327869] input: gpio-keys as /devices/platform/gpio-keys/input/input4
- [ 18.357265] Freeing unused kernel memory: 2048K
- [ 18.401865] Run /init as init process
- [ 18.437033] mmc2: new DDR MMC card at address 0001
- [ 18.446573] mmcblk2: mmc2:0001 DA4032 29.1 GiB
- [ 18.451495] mmcblk2boot0: mmc2:0001 DA4032 partition 1 4.00 MiB
- [ 18.457719] mmcblk2boot1: mmc2:0001 DA4032 partition 2 4.00 MiB
- :: running early hook [udev]
- [ 18.472840] mmcblk2: p1 p2
- Starting version 246.6-1.1-arch
- :: running hook [udev]
- :: Triggering uevents...
- [ 19.397505] input: 1c21800.lradc as /devices/platform/soc/1c21800.lradc/input/input5
- :: performing fsck on '/dev/mmcblk2p2'
- ROOT_MNJRO: clean, 276004/1896832 files, 1563972/7571419 blocks
- :: mounting '/dev/mmcblk2p2' on real root
- [ 19.875186] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: (null)
- :: running cleanup hook [udev]
- [ 20.449863] random: crng init done
- [ 21.026884] NET: Registered protocol family 10
- [ 21.036913] Segment Routing with IPv6
- [ 21.078559] systemd[1]: systemd 246.6-1.1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
- [ 21.101796] systemd[1]: Detected architecture arm64.
- Welcome to Manjaro ARM!
- [ 21.137495] systemd[1]: Set hostname to <manjaro-arm>.
- [ 22.254359] systemd[1]: Queued start job for default target Graphical Interface.
- [ 22.263738] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
- [ 22.276243] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
- [ 22.287390] systemd[1]: Created slice system-getty.slice.
- [ OK ] Created slice system-getty.slice.
- [ 22.311095] systemd[1]: Created slice system-modprobe.slice.
- [ OK ] Created slice system-modprobe.slice.
- [ 22.342864] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ 22.371079] systemd[1]: Created slice User and Session Slice.
- [ OK ] Created slice User and Session Slice.
- [ 22.397069] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Started Dispatch Password …ts to Console Directory Watch.
- [ 22.426081] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Started Forward Password R…uests to Wall Directory Watch.
- [ 22.453478] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ OK ] Set up automount Arbitrary…s File System Automount Point.
- [ 22.491066] systemd[1]: Reached target Local Encrypted Volumes.
- [ OK ] Reached target Local Encrypted Volumes.
- [ 22.522919] systemd[1]: Reached target Paths.
- [ OK ] Reached target Paths.
- [ 22.533734] systemd[1]: Reached target Remote Encrypted Volumes.
- [ OK ] Reached target Remote Encrypted Volumes.
- [ 22.556626] systemd[1]: Reached target Remote File Systems.
- [ OK ] Reached target Remote File Systems.
- [ 22.580620] systemd[1]: Reached target Slices.
- [ OK ] Reached target Slices.
- [ 22.597955] systemd[1]: Reached target Swap.
- [ OK ] Reached target Swap.
- [ 22.621071] systemd[1]: Listening on Device-mapper event daemon FIFOs.
- [ OK ] Listening on Device-mapper event daemon FIFOs.
- [ 22.642482] systemd[1]: Listening on LVM2 metadata daemon socket.
- [ OK ] Listening on LVM2 metadata daemon socket.
- [ 22.668491] systemd[1]: Listening on LVM2 poll daemon socket.
- [ OK ] Listening on LVM2 poll daemon socket.
- [ 22.700866] systemd[1]: Listening on Process Core Dump Socket.
- [ OK ] Listening on Process Core Dump Socket.
- [ 22.751277] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
- [ 22.763971] systemd[1]: Listening on Journal Socket (/dev/log).
- [ OK ] Listening on Journal Socket (/dev/log).
- [ 22.790492] systemd[1]: Listening on Journal Socket.
- [ OK ] Listening on Journal Socket.
- [ 22.810719] systemd[1]: Listening on Network Service Netlink Socket.
- [ OK ] Listening on Network Service Netlink Socket.
- [ 22.837398] systemd[1]: Listening on udev Control Socket.
- [ OK ] Listening on udev Control Socket.
- [ 22.858378] systemd[1]: Listening on udev Kernel Socket.
- [ OK ] Listening on udev Kernel Socket.
- [ 22.878436] systemd[1]: Listening on User Database Manager Socket.
- [ OK ] Listening on User Database Manager Socket.
- [ 22.913940] systemd[1]: Mounting Huge Pages File System...
- Mounting Huge Pages File System...
- [ 22.970323] systemd[1]: Mounting POSIX Message Queue File System...
- Mounting POSIX Message Queue File System...
- [ 23.002072] systemd[1]: Mounting Kernel Debug File System...
- Mounting Kernel Debug File System...
- [ 23.034368] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
- [ 23.047171] systemd[1]: Mounting Temporary Directory (/tmp)...
- Mounting Temporary Directory (/tmp)...
- [ 23.081483] systemd[1]: Starting Create list of static device nodes for the current kernel...
- Starting Create list of st…odes for the current kernel...
- [ 23.118284] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
- Starting Monitoring of LVM…meventd or progress polling...
- [ 23.150165] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
- [ 23.191019] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- [ 23.234187] systemd[1]: Starting Load Kernel Modules...
- Starting Load Kernel Modules...
- [ 23.283067] systemd[1]: Starting Remount Root and Kernel File Systems...
- Starting Remount Root and Kernel File Systems...
- [ 23.318468] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
- [ 23.346764] systemd[1]: Starting Coldplug All udev Devices...
- Starting Coldplug All udev Devices...
- [ 23.388385] systemd[1]: Mounted Huge Pages File System.
- [ OK ] Mounted Huge Pages File System.
- [ 23.418871] systemd[1]: Mounted POSIX Message Queue File System.
- [ OK ] Mounted POSIX Message Queue File System.
- [ 23.442751] systemd[1]: Mounted Kernel Debug File System.
- [ OK ] Mounted Kernel Debug File System.
- [ 23.470815] systemd[1]: Mounted Temporary Directory (/tmp).
- [ OK ] Mounted Temporary Directory (/tmp).
- [ 23.500416] systemd[1]: Finished Create list of static device nodes for the current kernel.
- [ OK ] Finished Create list of st… nodes for the current kernel.
- [ 23.564421] systemd[1]: Finished Load Kernel Modules.
- [ OK ] Finished Load Kernel Modules.
- [ 23.600687] systemd[1]: Finished Remount Root and Kernel File Systems.
- [ OK ] Finished Remount Root and Kernel File Systems.
- [ 23.666461] systemd[1]: Mounting FUSE Control File System...
- Mounting FUSE Control File System...
- [ 23.713756] systemd[1]: Mounting Kernel Configuration File System...
- Mounting Kernel Configuration File System...
- [ 23.775941] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
- [ 23.794343] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
- [ 23.822539] systemd[1]: Starting Load/Save Random Seed...
- Starting Load/Save Random Seed...
- [ 23.853686] systemd[1]: Starting Apply Kernel Variables...
- Starting Apply Kernel Variables...
- [ 23.898471] systemd[1]: Condition check resulted in Create System Users being skipped.
- [ 23.946653] systemd[1]: Starting Create Static Device Nodes in /dev...
- Starting Create Static Device Nodes in /dev...
- [ 23.992986] systemd[1]: Mounted FUSE Control File System.
- [ OK ] Mounted FUSE Control File System.
- [ 24.030909] systemd[1]: Mounted Kernel Configuration File System.
- [ OK ] Mounted Kernel Configuration File System.
- [ 24.065300] systemd[1]: Finished Load/Save Random Seed.
- [ OK ] Finished Load/Save Random Seed.
- [ 24.108615] systemd[1]: Finished Apply Kernel Variables.
- [ OK ] Finished Apply Kernel Variables.
- [ 24.143627] systemd[1]: Finished Create Static Device Nodes in /dev.
- [ OK ] Finished Create Static Device Nodes in /dev.
- [ 24.197602] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
- [ OK ] Started Entropy Daemon based on the HAVEGE algorithm.
- [ 24.267758] systemd[1]: Starting Journal Service...
- Starting Journal Service...
- [ 24.314586] systemd[1]: Starting Rule-based Manager for Device Events and Files...
- Starting Rule-based Manage…for Device Events and Files...
- [ 24.364463] systemd[1]: Finished Coldplug All udev Devices.
- [ OK ] Finished Coldplug All udev Devices.
- [* ] (1 of 5) A start job is running for /dev/ttyS0 (4s / 1min 30s)
- [ OK ] Started Journal Service.
- Starting Flush Journal to Persistent Storage...
- [ OK ] Finished Flush Journal to Persistent Storage.
- [ OK ] Started Rule-based Manager for Device Events and Files.
- [ OK ] Started LVM2 metadata daemon.
- Starting Network Service...
- [ OK ] Created slice system-systemd\x2dbacklight.slice.
- Starting Load/Save Screen …ness of backlight:backlight...
- [ OK ] Started Network Service.
- [ 29.888372] i2c-gpio i2c-csi: using lines 141 (SDA) and 140 (SCL)
- [ OK ] Finished Load/Save Screen …htness of backlight:backlight.
- [ OK ] Reached target Hardware activated USB gadget.
- [ OK ] Found device /dev/ttyS0.
- [ OK ] Finished Monitoring of LVM… dmeventd or progress polling.
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Reached target Containers.
- [ 32.442948] anx7688 1-0028: Vendor id 0x1f29
- [ 32.486802] iio iio:device3: interrupts on the rising edge
- [ 32.492358] iio iio:device3: registered magnetometer lis3mdl
- [ 32.506799] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
- [ 32.506839] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
- [ 32.506878] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
- [ 32.506909] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
- [ 32.530628] bootsplash: Loading splash file (606512 bytes)
- [ 32.530671] bootsplash: Loaded (606512 bytes, 2 pics, 76 blobs).
- [ 32.614712] lima 1c40000.gpu: bus rate = 200000000
- [ 32.614722] lima 1c40000.gpu: mod rate = 500000000
- [ 32.615204] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 1
- [ 32.878361] i2c i2c-2: Added multiplexed i2c bus 5
- [ 32.883547] bt-sco bt-sco-codec: ASoC: sink widget Capture overwritten
- [ 32.883563] bt-sco bt-sco-codec: ASoC: source widget Playback overwritten
- [ 32.883659] simple-amplifier audio-amplifier: supply VCC not found, using dummy regulator
- [ 32.896368] debugfs: File 'Playback' in directory 'dapm' already present!
- [ 32.896382] debugfs: File 'Capture' in directory 'dapm' already present!
- [ 32.902513] input: PinePhone Headset Jack as /devices/platform/sound/sound/card0/input6
- [ 33.326725] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 33.398684] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 33.402151] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 33.402165] cfg80211: failed to load regulatory.db
- [ 33.636234] Console: switching to colour frame buffer device 90x90
- [ 34.130086] Bluetooth: Core ver 2.22
- [ 34.130236] NET: Registered protocol family 31
- [ 34.130239] Bluetooth: HCI device and connection manager initialized
- [ 34.130261] Bluetooth: HCI socket layer initialized
- [ 34.130268] Bluetooth: L2CAP socket layer initialized
- [ 34.130286] Bluetooth: SCO socket layer initialized
- [ 34.300469] Bluetooth: HCI UART driver ver 2.3
- [ 34.300481] Bluetooth: HCI UART protocol H4 registered
- [ 34.300611] Bluetooth: HCI UART protocol LL registered
- [ 34.300655] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 34.300982] Bluetooth: HCI UART protocol Broadcom registered
- [ 34.684779] sun6i-csi 1cb0000.csi: creating gc2145 4-003c:0 -> sun6i-csi:0 link
- [ 34.684793] sun6i-csi 1cb0000.csi: creating ov5640 4-004c:0 -> sun6i-csi:0 link
- [ 34.927266] Bluetooth: hci0: RTL: examining hci_ver=07 hci_rev=000b lmp_ver=07 lmp_subver=8703
- [ 34.931886] Bluetooth: hci0: RTL: chip_type status=0 type=5
- [ 34.936016] Bluetooth: hci0: RTL: rom_version status=0 version=1
- [ 34.936026] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723cs_xx_fw.bin
- [ 34.942383] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723cs_xx_config.bin
- [ 34.966024] Bluetooth: hci0: RTL: cfg_sz 63, total sz 19427
- [ 35.208901] 8723cs: module is from the staging directory, the quality is unknown, you have been warned.
- [ 35.316807] Bluetooth: hci0: RTL: fw version 0xaa5ca4dc
- [ 35.372191] Bluetooth: hci0: Invalid header checksum
- [ 35.417143] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device
- [ 35.417160] sun6i-mipi-dsi 1ca0000.dsi: Attached device xbd599
- [ 35.417185] panel-sitronix-st7703 1ca0000.dsi.0: [drm:st7703_probe [panel_sitronix_st7703]] 720x1440@60 24bpp dsi 4dl - ready
- [ OK ] Set up automount media-mmcblk2p2.automount.
- [ 35.495410] Bluetooth: hci0: Too short H5 packet
- [ OK ] Found device /dev/disk/by-label/BOOT_MNJRO.
- [ OK ] Found device /dev/mmcblk2p1.
- [ 35.623459] Bluetooth: hci0: Too short H5 packet
- [ 35.638273] Bluetooth: hci0: Too short H5 packet
- [ OK ] Set up automount media-mmcblk2p1.automount.
- [ OK ] Reached target Sound Card.
- [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
- Mounting /boot...
- [ 35.949419] FAT-fs (mmcblk2p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- Starting Load/Save RF Kill Switch Status...
- [ OK ] Mounted /boot.
- [ OK ] Started Load/Save RF Kill Switch Status.
- [ OK ] Reached target Local File Systems.
- Starting Create Volatile Files and Directories...
- [ OK ] Finished Create Volatile Files and Directories.
- Starting Network Time Synchronization...
- Starting Update UTMP about System Boot/Shutdown...
- [ OK ] Finished Update UTMP about System Boot/Shutdown.
- [ OK ] Started Network Time Synchronization.
- [ OK ] Reached target System Initialization.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Reached target System Time Set.
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Started Daily man-db regeneration.
- [ OK ] Started Monthly clean packages cache.
- [ OK ] Started Generate mirrorlist weekly.
- [ OK ] Started Daily verification of password and group files.
- [ OK ] Reached target Timers.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- Starting Bluetooth service...
- [ OK ] Started D-Bus System Message Bus.
- Starting Network Manager...
- Starting IIO Sensor Proxy service...
- [ OK ] Started Setup modem.
- Starting Enable EG25 modem...
- Starting Authorization Manager...
- Starting Home Area Manager...
- Starting User Login Management...
- Starting Zram-based swap (…mpressed RAM block devices)...
- [ 38.794346] zram: Added device: zram0
- [ 38.863773] zram0: detected capacity change from 0 to 4610322432
- [ OK ] Created slice system-udisks2\x2dzram\x2dsetup.slice.
- Starting UDisks2 managed ZRAM device zram0 setup...
- [ 39.114245] Adding 4502264k swap on /dev/zram0. Priority:100 extents:1 across:4502264k SSFS
- [ OK ] Started Bluetooth service.
- [ OK ] Started IIO Sensor Proxy service.
- [ OK ] Finished Zram-based swap (compressed RAM block devices).
- [ OK ] Reached target Bluetooth.
- [ 39.375505] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 39.375513] Bluetooth: BNEP filters: protocol multicast
- [ 39.375536] Bluetooth: BNEP socket layer initialized
- [ OK ] Finished UDisks2 managed ZRAM device zram0 setup.
- [ OK ] Started Network Manager.
- [ OK ] Reached target Network.
- [ OK ] Started OpenSSH Daemon.
- Starting Hostname Service...
- Starting Permit User Sessions...
- [ OK ] Finished Permit User Sessions.
- [ OK ] Started Getty on tty1.
- [ OK ] Started Phosh, a shell for mobile phones.
- [ OK ] Started Phosh Priority Hack.
- [ OK ] Started Serial Getty on ttyS0.
- [ OK ] Reached target Login Prompts.
- [ OK ] Finished Enable EG25 modem.
- [ OK ] Started Authorization Manager.
- Starting Modem Manager...
- [ OK ] Started Modem Manager.
- [ OK ] Started Home Area Manager.
- Starting User Database Manager...
- [ OK ] Started User Login Management.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Hide bootsplash after starting the system...
- [ OK ] Started Hostname Service.
- Starting Network Manager Script Dispatcher Service...
- [ OK ] Started Network Manager Script Dispatcher Service.
- [ OK ] Started User Database Manager.
- [ OK ] Created slice User Slice of UID 1000.
- Starting User Runtime Directory /run/user/1000...
- Starting WPA supplicant...
- [ OK ] Finished User Runtime Directory /run/user/1000.
- Starting User Manager for UID 1000...
- [ OK ] Started WPA supplicant.
- Manjaro Linux 5.9.1-9-MANJARO-ARM (ttyS0)
- manjaro-arm login: [ 49.387561] Bluetooth: RFCOMM TTY layer initialized
- [ 49.392542] Bluetooth: RFCOMM socket layer initialized
- [ 49.397748] Bluetooth: RFCOMM ver 1.11
- [ 50.165853] usb0-vbus: disabling
- [ 50.169177] dc1sw: disabling
- [ 50.173235] avdd-csi: disabling
- [ 50.177373] vcc-1v2-hsic: disabling
- [ 50.182304] vcc5v0: disabling
- [ 51.681813] usb 3-1: new high-speed USB device number 2 using ehci-platform
- [ 52.242046] usbcore: registered new interface driver cdc_wdm
- [ 52.260764] usbcore: registered new interface driver option
- [ 52.266490] usbserial: USB Serial support registered for GSM modem (1-port)
- [ 52.273787] option 3-1:1.0: GSM modem (1-port) converter detected
- [ 52.312827] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
- [ 52.319990] option 3-1:1.1: GSM modem (1-port) converter detected
- [ 52.371030] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
- [ 52.378131] option 3-1:1.2: GSM modem (1-port) converter detected
- [ 52.402754] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
- [ 52.425213] qmi_wwan 3-1:1.4: cdc-wdm0: USB WDM device
- [ 52.443052] qmi_wwan 3-1:1.4 wwan0: register 'qmi_wwan' at usb-1c1b000.usb-1, WWAN/QMI device, 72:22:08:0b:4b:2f
- [ 52.453435] usbcore: registered new interface driver qmi_wwan
- [ 52.489973] option 3-1:1.3: GSM modem (1-port) converter detected
- [ 52.503049] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
- [ 53.673504] sun8i-codec 1c22e00.codec: sun8i-codec-aif2 sample rate (8000 Hz) conflicts with other audio streams
- [ 53.683770] sun8i-codec 1c22e00.codec: ASoC: error at snd_soc_dai_hw_params on sun8i-codec-aif2: -16
- [ 53.692944] asoc-simple-card sound: ASoC: PRE_PMU: ec25-sun8i-codec-aif2-playback event failed: -16
- [ 53.736633] sun8i-codec 1c22e00.codec: sun8i-codec-aif2 sample rate (8000 Hz) conflicts with other audio streams
- [ 53.746948] sun8i-codec 1c22e00.codec: ASoC: error at snd_soc_dai_hw_params on sun8i-codec-aif2: -16
- [ 53.756106] asoc-simple-card sound: ASoC: PRE_PMU: ec25-sun8i-codec-aif2-capture event failed: -16
- [ 76.738268] gc2145 4-003c: bank switch: 0x00
- [ 76.743192] gc2145 4-003c: device id: 0x2145
- [ 76.751821] sun6i-csi 1cb0000.csi: Direct firmware load for gc2145-init.bin failed with error -2
- [ 76.760624] gc2145 4-003c: Failed to read firmware gc2145-init.bin, continuing anyway...
- [ 76.777268] gc2145 4-003c: bank switch: 0x01
- [ 76.783439] gc2145 4-003c: bank switch: 0x00
- [ 76.790627] gc2145 4-003c: bank switch: 0x01
- [ 76.798353] gc2145 4-003c: bank switch: 0x00
- [ 76.803386] gc2145 4-003c: bank switch: 0x01
- [ 76.814935] gc2145 4-003c: bank switch: 0x00
- [ 76.822494] gc2145 4-003c: bank switch: 0x01
- [ 76.827534] gc2145 4-003c: bank switch: 0x00
- [ 87.406725] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 89.126499] gc2145 4-003c: device id: 0x2145
- [ 89.135133] sun6i-csi 1cb0000.csi: Direct firmware load for gc2145-init.bin failed with error -2
- [ 89.143956] gc2145 4-003c: Failed to read firmware gc2145-init.bin, continuing anyway...
- [ 89.160673] gc2145 4-003c: bank switch: 0x01
- [ 89.166869] gc2145 4-003c: bank switch: 0x00
- [ 89.174076] gc2145 4-003c: bank switch: 0x01
- [ 89.181804] gc2145 4-003c: bank switch: 0x00
- [ 89.186845] gc2145 4-003c: bank switch: 0x01
- [ 89.198457] gc2145 4-003c: bank switch: 0x00
- [ 89.206056] gc2145 4-003c: bank switch: 0x01
- [ 89.211093] gc2145 4-003c: bank switch: 0x00
- [ 91.489609] gc2145 4-003c: device id: 0x2145
- [ 91.498304] sun6i-csi 1cb0000.csi: Direct firmware load for gc2145-init.bin failed with error -2
- [ 91.507129] gc2145 4-003c: Failed to read firmware gc2145-init.bin, continuing anyway...
- [ 91.523857] gc2145 4-003c: bank switch: 0x01
- [ 91.530061] gc2145 4-003c: bank switch: 0x00
- [ 91.537254] gc2145 4-003c: bank switch: 0x01
- [ 91.544979] gc2145 4-003c: bank switch: 0x00
- [ 91.550029] gc2145 4-003c: bank switch: 0x01
- [ 91.561649] gc2145 4-003c: bank switch: 0x00
- [ 91.569230] gc2145 4-003c: bank switch: 0x01
- [ 91.574277] gc2145 4-003c: bank switch: 0x00
- [ 92.126506] gc2145 4-003c: device id: 0x2145
- [ 92.135105] sun6i-csi 1cb0000.csi: Direct firmware load for gc2145-init.bin failed with error -2
- [ 92.143925] gc2145 4-003c: Failed to read firmware gc2145-init.bin, continuing anyway...
- [ 92.160590] gc2145 4-003c: bank switch: 0x01
- [ 92.166763] gc2145 4-003c: bank switch: 0x00
- [ 92.173947] gc2145 4-003c: bank switch: 0x01
- [ 92.181651] gc2145 4-003c: bank switch: 0x00
- [ 92.186704] gc2145 4-003c: bank switch: 0x01
- [ 92.198258] gc2145 4-003c: bank switch: 0x00
- [ 92.205826] gc2145 4-003c: bank switch: 0x01
- [ 92.210856] gc2145 4-003c: bank switch: 0x00
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement