Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 4.14.162 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r10860-a3ffeb413b)) #0 Mon Jan 6 16:47:09 2020
- [ 0.000000] Using WNDR4700 Platform machine description
- [ 0.000000] -----------------------------------------------------
- [ 0.000000] phys_mem_size = 0x10000000
- [ 0.000000] dcache_bsize = 0x20
- [ 0.000000] icache_bsize = 0x20
- [ 0.000000] cpu_features = 0x0000000010100040
- [ 0.000000] possible = 0x0000000030100040
- [ 0.000000] always = 0x0000000000100000
- [ 0.000000] cpu_user_features = 0x8c008000 0x00000000
- [ 0.000000] mmu_features = 0x00000008
- [ 0.000000] -----------------------------------------------------
- [ 0.000000] Top of RAM: 0x10000000, Total RAM: 0x10000000
- [ 0.000000] Memory hole size: 0MB
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000000000-0x000000000fffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
- [ 0.000000] On node 0 totalpages: 65536
- [ 0.000000] free_area_init_node: node 0, pgdat c0560d98, node_mem_map cfdea000
- [ 0.000000] DMA zone: 512 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 65536 pages, LIFO batch:15
- [ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
- [ 0.000000] Kernel command line: rootfstype=squashfs noinitrd
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Memory: 253932K/262144K available (4588K kernel code, 196K rwdata, 600K rodata, 180K init, 238K bss, 8212K reserved, 0K cma-reserved)
- [ 0.000000] Kernel virtual memory layout:
- [ 0.000000] * 0xfffdf000..0xfffff000 : fixmap
- [ 0.000000] * 0xfde00000..0xfe000000 : consistent mem
- [ 0.000000] * 0xfde00000..0xfde00000 : early ioremap
- [ 0.000000] * 0xd1000000..0xfde00000 : vmalloc & ioremap
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
- [ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
- [ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
- [ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
- [ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
- [ 0.000000] time_init: decrementer frequency = 1000.000010 MHz
- [ 0.000000] time_init: processor frequency = 1000.000010 MHz
- [ 0.000015] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
- [ 0.000026] clocksource: timebase mult[800000] shift[23] registered
- [ 0.000047] clockevent: decrementer mult[80000015] shift[31] cpu[0]
- [ 0.000087] pid_max: default: 32768 minimum: 301
- [ 0.000201] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000216] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.003362] random: get_random_u32 called from 0xc01ebb38 with crng_init=0
- [ 0.003610] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
- [ 0.003634] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 0.004151] NET: Registered protocol family 16
- [ 0.005056] PPC4XX OCM1: 32768 Bytes (enabled)
- [ 0.005075] PPC4XX OCM1: 32768 Bytes (non-cached)
- [ 0.005080] PPC4XX OCM1: 0 Bytes (cached)
- [ 0.005129] debugfs ppc4xx ocm: failed to create file
- [ 0.005304] 256k L2-cache enabled
- [ 0.005416] PCIE0: Checking link...
- [ 0.005422] PCIE0: Device detected, waiting for link...
- [ 0.005426] PCIE0: link is up !
- [ 0.113713] PCI host bridge /plb/pciex@d00000000 (primary) ranges:
- [ 0.113740] MEM 0x0000000e00000000..0x0000000e7fffffff -> 0x0000000080000000
- [ 0.113751] MEM 0x0000000f00000000..0x0000000f000fffff -> 0x0000000000000000
- [ 0.113759] IO 0x0000000f80000000..0x0000000f8000ffff -> 0x0000000000000000
- [ 0.113777] 4xx PCI DMA offset set to 0x00000000
- [ 0.113782] 4xx PCI DMA window base to 0x0000000000000000
- [ 0.113786] DMA window size 0x0000000080000000
- [ 0.113809] PCIE0: successfully set as root-complex
- [ 0.114387] PCI: Probing PCI hardware
- [ 0.114521] PCI host bridge to bus 0000:40
- [ 0.114540] pci_bus 0000:40: root bus resource [io 0x0000-0xffff]
- [ 0.114551] pci_bus 0000:40: root bus resource [mem 0xe00000000-0xe7fffffff] (bus address [0x80000000-0xffffffff])
- [ 0.114561] pci_bus 0000:40: root bus resource [mem 0xf00000000-0xf000fffff] (bus address [0x00000000-0x000fffff])
- [ 0.114571] pci_bus 0000:40: root bus resource [bus 40-ff]
- [ 0.114583] pci_bus 0000:40: busn_res: [bus 40-ff] end is updated to ff
- [ 0.114618] pci 0000:40:00.0: [aaa0:bed0] type 01 class 0x060400
- [ 0.114651] pci 0000:40:00.0: reg 0x10: [mem 0x00000000-0x7fffffff pref]
- [ 0.114678] PCI: Hiding 4xx host bridge resources 0000:40:00.0
- [ 0.114978] pci 0000:41:00.0: [111d:803a] type 01 class 0x060400
- [ 0.115037] pci 0000:41:00.0: enabling Extended Tags
- [ 0.115112] pci 0000:41:00.0: PME# supported from D0 D3hot D3cold
- [ 0.115245] pci 0000:40:00.0: PCI bridge to [bus 41-7f]
- [ 0.115263] pci 0000:40:00.0: bridge window [io 0x0000-0x0fff]
- [ 0.115270] pci 0000:40:00.0: bridge window [mem 0xe30000000-0xe302fffff]
- [ 0.115287] pci 0000:41:00.0: bridge configuration invalid ([bus 02-05]), reconfiguring
- [ 0.115421] pci 0000:42:02.0: [111d:803a] type 01 class 0x060400
- [ 0.115499] pci 0000:42:02.0: enabling Extended Tags
- [ 0.115585] pci 0000:42:02.0: PME# supported from D0 D3hot D3cold
- [ 0.115751] pci 0000:42:03.0: [111d:803a] type 01 class 0x060400
- [ 0.115810] pci 0000:42:03.0: enabling Extended Tags
- [ 0.115890] pci 0000:42:03.0: PME# supported from D0 D3hot D3cold
- [ 0.116043] pci 0000:42:04.0: [111d:803a] type 01 class 0x060400
- [ 0.116103] pci 0000:42:04.0: enabling Extended Tags
- [ 0.116185] pci 0000:42:04.0: PME# supported from D0 D3hot D3cold
- [ 0.116366] pci 0000:41:00.0: PCI bridge to [bus 42-7f]
- [ 0.116387] pci 0000:41:00.0: bridge window [mem 0xe30000000-0xe302fffff]
- [ 0.116412] pci 0000:42:02.0: bridge configuration invalid ([bus 03-03]), reconfiguring
- [ 0.116427] pci 0000:42:03.0: bridge configuration invalid ([bus 04-04]), reconfiguring
- [ 0.116456] pci 0000:42:04.0: bridge configuration invalid ([bus 05-05]), reconfiguring
- [ 0.116599] pci 0000:43:00.0: [168c:0030] type 00 class 0x028000
- [ 0.116647] pci 0000:43:00.0: reg 0x10: [mem 0xe30000000-0xe3001ffff 64bit]
- [ 0.116705] pci 0000:43:00.0: reg 0x30: [mem 0xf00000000-0xf0000ffff pref]
- [ 0.116809] pci 0000:43:00.0: supports D1
- [ 0.116815] pci 0000:43:00.0: PME# supported from D0 D1 D3hot
- [ 0.116952] pci 0000:42:02.0: PCI bridge to [bus 43-7f]
- [ 0.116974] pci 0000:42:02.0: bridge window [mem 0xe30000000-0xe300fffff]
- [ 0.117063] pci_bus 0000:43: busn_res: [bus 43-7f] end is updated to 43
- [ 0.117215] pci 0000:44:00.0: [168c:0033] type 00 class 0x028000
- [ 0.117263] pci 0000:44:00.0: reg 0x10: [mem 0xe30100000-0xe3011ffff 64bit]
- [ 0.117321] pci 0000:44:00.0: reg 0x30: [mem 0xf00000000-0xf0000ffff pref]
- [ 0.117435] pci 0000:44:00.0: supports D1
- [ 0.117440] pci 0000:44:00.0: PME# supported from D0 D1 D3hot
- [ 0.117598] pci 0000:42:03.0: PCI bridge to [bus 44-7f]
- [ 0.117621] pci 0000:42:03.0: bridge window [mem 0xe30100000-0xe301fffff]
- [ 0.117693] pci_bus 0000:44: busn_res: [bus 44-7f] end is updated to 44
- [ 0.117845] pci 0000:45:00.0: [1912:0015] type 00 class 0x0c0330
- [ 0.117898] pci 0000:45:00.0: reg 0x10: [mem 0xe30200000-0xe30201fff 64bit]
- [ 0.118075] pci 0000:45:00.0: PME# supported from D0 D3hot
- [ 0.118215] pci 0000:42:04.0: PCI bridge to [bus 45-7f]
- [ 0.118238] pci 0000:42:04.0: bridge window [mem 0xe30200000-0xe302fffff]
- [ 0.118311] pci_bus 0000:45: busn_res: [bus 45-7f] end is updated to 45
- [ 0.118323] pci_bus 0000:42: busn_res: [bus 42-7f] end is updated to 45
- [ 0.118341] pci_bus 0000:40: busn_res: [bus 40-ff] end is updated to 7f
- [ 0.118354] pci 0000:40:00.0: Max Payload Size set to 128/ 256 (was 256), Max Read Rq 256
- [ 0.118371] pci 0000:41:00.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
- [ 0.118387] pci 0000:42:02.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
- [ 0.118405] pci 0000:43:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512
- [ 0.118420] pci 0000:42:03.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
- [ 0.118438] pci 0000:44:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512
- [ 0.118453] pci 0000:42:04.0: Max Payload Size set to 128/ 256 (was 128), Max Read Rq 128
- [ 0.118490] pci 0000:45:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512
- [ 0.118582] pci 0000:40:00.0: disabling bridge window [io 0x0000-0xffffffffffffffff] to [bus 41-7f] (unused)
- [ 0.118607] pci 0000:40:00.0: BAR 8: assigned [mem 0xe00000000-0xe002fffff]
- [ 0.118620] pci 0000:41:00.0: BAR 8: assigned [mem 0xe00000000-0xe002fffff]
- [ 0.118633] pci 0000:42:02.0: BAR 8: assigned [mem 0xe00000000-0xe000fffff]
- [ 0.118643] pci 0000:42:03.0: BAR 8: assigned [mem 0xe00100000-0xe001fffff]
- [ 0.118652] pci 0000:42:04.0: BAR 8: assigned [mem 0xe00200000-0xe002fffff]
- [ 0.118665] pci 0000:43:00.0: BAR 0: assigned [mem 0xe00000000-0xe0001ffff 64bit]
- [ 0.118686] pci 0000:43:00.0: BAR 6: assigned [mem 0xe00020000-0xe0002ffff pref]
- [ 0.118694] pci 0000:42:02.0: PCI bridge to [bus 43]
- [ 0.118706] pci 0000:42:02.0: bridge window [mem 0xe00000000-0xe000fffff]
- [ 0.118721] pci 0000:44:00.0: BAR 0: assigned [mem 0xe00100000-0xe0011ffff 64bit]
- [ 0.118740] pci 0000:44:00.0: BAR 6: assigned [mem 0xe00120000-0xe0012ffff pref]
- [ 0.118748] pci 0000:42:03.0: PCI bridge to [bus 44]
- [ 0.118757] pci 0000:42:03.0: bridge window [mem 0xe00100000-0xe001fffff]
- [ 0.118773] pci 0000:45:00.0: BAR 0: assigned [mem 0xe00200000-0xe00201fff 64bit]
- [ 0.118792] pci 0000:42:04.0: PCI bridge to [bus 45]
- [ 0.118801] pci 0000:42:04.0: bridge window [mem 0xe00200000-0xe002fffff]
- [ 0.118813] pci 0000:41:00.0: PCI bridge to [bus 42-45]
- [ 0.118823] pci 0000:41:00.0: bridge window [mem 0xe00000000-0xe002fffff]
- [ 0.118835] pci 0000:40:00.0: PCI bridge to [bus 41-7f]
- [ 0.118844] pci 0000:40:00.0: bridge window [mem 0xe00000000-0xe002fffff]
- [ 0.118855] pci_bus 0000:40: resource 4 [io 0x0000-0xffff]
- [ 0.118861] pci_bus 0000:40: resource 5 [mem 0xe00000000-0xe7fffffff]
- [ 0.118866] pci_bus 0000:40: resource 6 [mem 0xf00000000-0xf000fffff]
- [ 0.118872] pci_bus 0000:41: resource 1 [mem 0xe00000000-0xe002fffff]
- [ 0.118878] pci_bus 0000:42: resource 1 [mem 0xe00000000-0xe002fffff]
- [ 0.118884] pci_bus 0000:43: resource 1 [mem 0xe00000000-0xe000fffff]
- [ 0.118890] pci_bus 0000:44: resource 1 [mem 0xe00100000-0xe001fffff]
- [ 0.118895] pci_bus 0000:45: resource 1 [mem 0xe00200000-0xe002fffff]
- [ 0.127214] SCSI subsystem initialized
- [ 0.127586] libata version 3.00 loaded.
- [ 0.129108] clocksource: Switched to clocksource timebase
- [ 0.130015] NET: Registered protocol family 2
- [ 0.130447] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.130474] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.130495] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.130574] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.130591] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.130702] NET: Registered protocol family 1
- [ 5.984965] pci 0000:45:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
- [ 5.984992] PCI: CLS 32 bytes, default 32
- [ 5.988575] OF: /plb/opb/gpio@ef600b00: could not find phandle
- [ 5.989826] dw_dmac 4bffd0800.dma: DesignWare DMA Controller, 2 channels
- [ 5.993457] Crashlog allocated RAM at address 0x3f00000
- [ 5.993944] workingset: timestamp_bits=30 max_order=16 bucket_order=0
- [ 5.996909] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 6.005338] io scheduler noop registered
- [ 6.005352] io scheduler deadline registered (default)
- [ 6.006837] pcieport 0000:40:00.0: request AER IRQ 0 failed
- [ 6.006871] aer: probe of 0000:40:00.0:pcie002 failed with error -22
- [ 6.006936] pcie_pme: probe of 0000:40:00.0:pcie001 failed with error -22
- [ 6.007040] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
- [ 6.008810] console [ttyS0] disabled
- [ 6.008859] 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 37, base_baud = 347222) is a TI16750
- [ 6.816725] console [ttyS0] enabled
- [ 6.820765] sata-dwc 4bffd1800.sata: id 0, controller version 1.91
- [ 6.828207] scsi host0: sata-dwc
- [ 6.831618] ata1: SATA max UDMA/133 irq 46
- [ 6.836814] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1
- [ 6.843169] nand: Hynix H27U1G8F2BTR-BC
- [ 6.846995] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 6.854552] Scanning device for bad blocks
- [ 6.914096] Bad eraseblock 908 at 0x000007180000
- [ 6.925917] 12 fixed-partitions partitions found on MTD device 4e4000000.ndfc.nand
- [ 6.933477] Creating 12 MTD partitions on "4e4000000.ndfc.nand":
- [ 6.939464] 0x000000000000-0x000008000000 : "NAND 128MiB 3,3V 8-bit"
- [ 6.947077] 0x000000000000-0x000000180000 : "uboot"
- [ 6.952390] 0x000000180000-0x0000001a0000 : "device-tree"
- [ 6.958235] 0x000000180000-0x000000500000 : "kernel"
- [ 6.963637] 0x000000500000-0x0000019e0000 : "ubi"
- [ 6.968876] 0x0000019e0000-0x000001a60000 : "config"
- [ 6.974279] 0x000001a60000-0x000001ae0000 : "pot"
- [ 6.979421] 0x000001ae0000-0x000001de0000 : "traffic_meter"
- [ 6.985458] 0x000001de0000-0x000001fa0000 : "language"
- [ 6.991016] 0x000001fa0000-0x000007fc0000 : "ecos"
- [ 6.996812] 0x000007fc0000-0x000008000000 : "wifi_data"
- [ 7.002483] 0x000000180000-0x0000019e0000 : "firmware"
- [ 7.008643] libphy: Fixed MDIO Bus: probed
- [ 7.012753] PPC 4xx OCP EMAC driver, version 3.54
- [ 7.017745] MAL v2 /plb/mcmal, 1 TX channels, 1 RX channels
- [ 7.023472] RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support
- [ 7.030625] TAH /plb/opb/emac-tah@ef601350 initialized
- [ 7.036033] /plb/opb/emac-rgmii@ef601500: input 0 in rgmii mode
- [ 7.042053] libphy: emac_mdio: probed
- [ 7.051819] switch0: Atheros AR8327 rev. 4 switch registered on 4ef600c00.ethernet
- [ 7.166180] ata1: SATA link down (SStatus 0 SControl 300)
- [ 7.613733] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 20:e5:2a:55:be:18
- [ 7.620602] eth0: found Atheros AR8216/AR8236/AR8316 PHY (0x00)
- [ 7.626686] i2c /dev entries driver
- [ 7.630593] ibm-iic 4ef600700.i2c: using standard (100 kHz) mode
- [ 7.657237] booke_wdt: powerpc book-e watchdog driver loaded
- [ 7.665689] NET: Registered protocol family 10
- [ 7.671583] Segment Routing with IPv6
- [ 7.675315] NET: Registered protocol family 17
- [ 7.679777] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 7.692688] 8021q: 802.1Q VLAN Support v1.8
- [ 7.699031] UBI: auto-attach mtd4
- [ 7.702375] ubi0: attaching mtd4
- [ 7.754224] ubi0: scanning is finished
- [ 7.765603] ubi0: attached mtd4 (name "ubi", size 20 MiB)
- [ 7.771014] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
- [ 7.777860] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
- [ 7.784538] ubi0: VID header offset: 512 (aligned 512), data offset: 2048
- [ 7.791302] ubi0: good PEBs: 167, bad PEBs: 0, corrupted PEBs: 0
- [ 7.797281] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
- [ 7.804471] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1794220303
- [ 7.813568] ubi0: available PEBs: 0, total reserved PEBs: 167, PEBs reserved for bad PEB handling: 20
- [ 7.822786] ubi0: background thread "ubi_bgt0d" started, PID 454
- [ 7.829818] block ubiblock0_0: created from ubi0:0(rootfs)
- [ 7.835309] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
- [ 7.842248] hctosys: unable to open rtc device (rtc0)
- [ 7.850725] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
- [ 7.858476] Freeing unused kernel memory: 180K
- [ 8.113400] init: Console is alive
- [ 8.116959] init: - watchdog -
- [ 8.790255] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 8.835574] usbcore: registered new interface driver usbfs
- [ 8.841132] usbcore: registered new interface driver hub
- [ 8.846501] usbcore: registered new device driver usb
- [ 8.873748] irq: type mismatch, failed to map hwirq-20 for /interrupt-controller1!
- [ 8.881488] gpio-keys plb:opb:keys: failed to get irq for gpio:495
- [ 8.993206] dwc2 4bff80000.usbotg: DWC OTG Controller
- [ 8.998293] dwc2 4bff80000.usbotg: new USB bus registered, assigned bus number 1
- [ 9.005705] dwc2 4bff80000.usbotg: irq 42, io mem 0x4bff80000
- [ 9.012002] hub 1-0:1.0: USB hub found
- [ 9.015929] hub 1-0:1.0: 1 port detected
- [ 9.025973] xhci_hcd 0000:45:00.0: Direct firmware load for K2013080.mem failed with error -2
- [ 9.034506] xhci_hcd 0000:45:00.0: Falling back to user helper
- [ 9.046541] usbcore: registered new interface driver usb-storage
- [ 9.053042] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 9.062943] init: - preinit -
- [ 9.126799] dwc2 4bff80000.usbotg: Overcurrent change detected
- [ 9.162578] dwc2 4bff80000.usbotg: Overcurrent change detected
- [ 9.355875] eth0: link is up, 1000 FDX
- [ 9.359963] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 9.365829] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 9.381844] random: procd: uninitialized urandom read (4 bytes read)
- [ 12.482978] mount_root: loading kmods from internal overlay
- [ 12.499722] kmodloader: loading kernel modules from //etc/modules-boot.d/*
- [ 12.507380] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
- [ 13.223384] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 572
- [ 13.264622] UBIFS (ubi0:1): recovery needed
- [ 13.368370] UBIFS (ubi0:1): recovery completed
- [ 13.372879] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
- [ 13.380698] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- [ 13.390570] UBIFS (ubi0:1): FS size: 13547520 bytes (12 MiB, 105 LEBs), journal size 1032193 bytes (0 MiB, 6 LEBs)
- [ 13.400875] UBIFS (ubi0:1): reserved for root: 639882 bytes (624 KiB)
- [ 13.407298] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 1D3F5B48-9D1E-4499-8A16-B56CF3514D24, small LPT model
- [ 13.420617] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
- [ 13.432241] block: extroot: not configured
- [ 13.436507] UBIFS (ubi0:1): un-mount UBI device 0
- [ 13.441221] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
- [ 13.455171] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 574
- [ 13.535620] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
- [ 13.543457] UBIFS (ubi0:1): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- [ 13.553330] UBIFS (ubi0:1): FS size: 13547520 bytes (12 MiB, 105 LEBs), journal size 1032193 bytes (0 MiB, 6 LEBs)
- [ 13.563635] UBIFS (ubi0:1): reserved for root: 639882 bytes (624 KiB)
- [ 13.570057] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 1D3F5B48-9D1E-4499-8A16-B56CF3514D24, small LPT model
- [ 13.583937] mount_root: loading kmods from internal overlay
- [ 13.600205] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
- [ 13.609944] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
- [ 14.227826] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
- [ 14.240397] block: extroot: not configured
- [ 14.246049] mount_root: switching to ubifs overlay
- [ 14.280221] urandom-seed: Seeding with /etc/urandom.seed
- [ 14.323398] procd: - early -
- [ 14.326368] procd: - watchdog -
- [ 14.894215] procd: - watchdog -
- [ 14.897555] procd: - ubus -
- [ 14.940242] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 14.950447] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 14.957056] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 14.964011] procd: - init -
- [ 15.364332] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 15.389730] urngd: v1.0.0 started.
- [ 15.405618] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
- [ 15.448026] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 15.468250] Loading modules backported from Linux version v4.19.85-0-gc63ee2939dc1
- [ 15.475809] Backport generated by backports.git v4.19.85-1-0-g8a8be258
- [ 15.501560] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 15.520522] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
- [ 15.578293] random: crng init done
- [ 15.581706] random: 6 urandom warning(s) missed due to ratelimiting
- [ 15.593796] xt_time: kernel timezone is -0000
- [ 15.642052] PPP generic driver version 2.4.2
- [ 15.647936] NET: Registered protocol family 24
- [ 15.679464] ath: EEPROM regdomain: 0x0
- [ 15.679472] ath: EEPROM indicates default country code should be used
- [ 15.679475] ath: doing EEPROM country->regdmn map search
- [ 15.679484] ath: country maps to regdmn code: 0x3a
- [ 15.679488] ath: Country alpha2 being used: US
- [ 15.679490] ath: Regpair used: 0x3a
- [ 15.690734] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 15.692019] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xd5a40000, irq=19
- [ 15.726468] ath: EEPROM regdomain: 0x0
- [ 15.726476] ath: EEPROM indicates default country code should be used
- [ 15.726478] ath: doing EEPROM country->regdmn map search
- [ 15.726488] ath: country maps to regdmn code: 0x3a
- [ 15.726492] ath: Country alpha2 being used: US
- [ 15.726494] ath: Regpair used: 0x3a
- [ 15.737716] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- [ 15.739020] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xd5a80000, irq=20
- [ 15.775549] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 21.042128] eth0: link is up, 1000 FDX
- [ 21.062426] br-lan: port 1(eth0.1) entered blocking state
- [ 21.067841] br-lan: port 1(eth0.1) entered disabled state
- [ 21.073453] device eth0.1 entered promiscuous mode
- [ 21.078245] device eth0 entered promiscuous mode
- [ 21.142173] br-lan: port 1(eth0.1) entered blocking state
- [ 21.147583] br-lan: port 1(eth0.1) entered forwarding state
- [ 21.153260] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
- [ 22.049513] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Add Comment
Please, Sign In to add comment