API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 13th, 2024
66
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 14.15 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2024.01-armbian (Mar 14 2024 - 00:33:35 +0000) Allwinner Technology
  2.  
  3. CPU: Allwinner A20 (SUN7I)
  4. Model: Cubietech Cubieboard2
  5. DRAM: 512 MiB
  6. Core: 59 devices, 24 uclasses, devicetree: separate
  7. WDT: Not starting watchdog@1c20c90
  8. MMC: mmc@1c0f000: 0
  9. Loading Environment from FAT... MMC: no card present
  10. ** Bad device specification mmc 0 **
  11. Unknown monitor
  12. Unknown monitor
  13. In: serial,usbkbd
  14. Out: serial,vidconsole
  15. Err: serial,vidconsole
  16. Net: eth_designware ethernet@1c50000: Can't get reset: -2
  17. Could not get PHY for ethernet@1c50000: addr 1
  18. No ethernet found.
  19.  
  20. MMC: no card present
  21. ** Bad device specification mmc 0 **
  22. Couldn't find partition mmc 0
  23. MMC: no card present
  24. ** Bad device specification mmc 0 **
  25. Couldn't find partition mmc 0
  26. starting USB...
  27. Bus usb@1c14000: USB EHCI 1.00
  28. Bus usb@1c14400: USB OHCI 1.0
  29. Bus usb@1c1c000: USB EHCI 1.00
  30. Bus usb@1c1c400: USB OHCI 1.0
  31. scanning bus usb@1c14000 for devices... 1 USB Device(s) found
  32. scanning bus usb@1c14400 for devices... 1 USB Device(s) found
  33. scanning bus usb@1c1c000 for devices... 2 USB Device(s) found
  34. scanning bus usb@1c1c400 for devices... 1 USB Device(s) found
  35. scanning usb for storage devices... 1 Storage Device(s) found
  36. Autoboot in 1 seconds, press <Space> to stop
  37. MMC: no card present
  38. MMC Device 1 not found
  39. no mmc device at slot 1
  40. scanning bus for devices...
  41. AHCI PHY power up failed.
  42.  
  43. Device 0: unknown device
  44.  
  45. Device 0: Vendor: Kingston Rev: 1.00 Prod: DT 101 G2
  46. Type: Removable Hard Disk
  47. Capacity: 15295.0 MB = 14.9 GB (31324160 x 512)
  48. ... is now current device
  49. Scanning usb 0:1...
  50. Found U-Boot script /boot/boot.scr
  51. 4121 bytes read in 1 ms (3.9 MiB/s)
  52. ## Executing script at 43100000
  53. U-boot loaded from SD
  54. Boot script loaded from usb
  55. 228 bytes read in 0 ms
  56. 18727006 bytes read in 664 ms (26.9 MiB/s)
  57. 8947824 bytes read in 318 ms (26.8 MiB/s)
  58. Found mainline kernel configuration
  59. 42536 bytes read in 5 ms (8.1 MiB/s)
  60. Working FDT set to 43000000
  61. 2301 bytes read in 3 ms (749 KiB/s)
  62. Applying kernel provided DT overlay sun7i-a20-nand.dtbo
  63. 1093 bytes read in 2 ms (533.2 KiB/s)
  64. 1;-1fdone.
  65. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  66. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
  67. done.
  68. Begin: Will now check root file system ... fsck from util-linux 2.37.2
  69. [/usr/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1
  70. armbi_root: clean, 145597/959616 files, 801481/3873792 blocks
  71. done.
  72. done.
  73. Begin: Running /scripts/local-bottom ... done.
  74. Begin: Running /scripts/init-bottom ... done.
  75.  
  76. Welcome to Armbian 24.5.0-trunk.412 jammy!
  77.  
  78. -.mount
  79. [ OK ] Created slice Slice /system/modprobe.
  80. [ OK ] Created slice Slice /system/serial-getty.
  81. [ OK ] Created slice User and Session Slice.
  82. [ OK ] Started Forward Password R…uests to Wall Directory Watch.
  83. [ OK ] Set up automount Arbitrary…s File System Automount Point.
  84. [ OK ] Reached target Slice Units.
  85. [ OK ] Reached target Swaps.
  86. [ OK ] Reached target System Time Set.
  87. [ OK ] Reached target Local Verity Protected Volumes.
  88. [ OK ] Listening on RPCbind Server Activation Socket.
  89. [ OK ] Listening on Syslog Socket.
  90. [ OK ] Listening on fsck to fsckd communication Socket.
  91. [ OK ] Listening on initctl Compatibility Named Pipe.
  92. [ OK ] Listening on Journal Audit Socket.
  93. [ OK ] Listening on Journal Socket (/dev/log).
  94. [ OK ] Listening on Journal Socket.
  95. [ OK ] Listening on udev Control Socket.
  96. [ OK ] Listening on udev Kernel Socket.
  97. Mounting POSIX Message Queue File System...
  98. Mounting Kernel Debug File System...
  99. Mounting Kernel Trace File System...
  100. Starting Restore / save the current clock...
  101. Starting Set the console keyboard layout...
  102. Starting Create List of Static Device Nodes...
  103. Starting Load Kernel Module configfs...
  104. Starting Load Kernel Module drm...
  105. Starting Load Kernel Module efi_pstore...
  106. Starting Load Kernel Module fuse...
  107. Starting Load Kernel Modules...
  108. Starting Remount Root and Kernel File Systems...
  109. Starting Coldplug All udev Devices...
  110. [ OK ] Mounted POSIX Message Queue File System.
  111. [ OK ] Mounted Kernel Debug File System.
  112. dev-mqueue.mount
  113. sys-kernel-debug.mount
  114. [ OK ] Mounted Kernel Trace File System.
  115. sys-kernel-tracing.mount
  116. [ OK ] Finished Restore / save the current clock.
  117. fake-hwclock.service
  118. [ OK ] Finished Create List of Static Device Nodes.
  119. kmod-static-nodes.service
  120. [ OK ] Finished Load Kernel Module configfs.
  121. [ OK ] Finished Load Kernel Module drm.
  122. [ OK ] Finished Load Kernel Module efi_pstore.
  123. [ OK ] Finished Load Kernel Module fuse.
  124. [ OK ] Finished Load Kernel Modules.
  125. systemd-modules-load.service
  126. [ OK ] Finished Remount Root and Kernel File Systems.
  127. systemd-remount-fs.service
  128. Mounting FUSE Control File System...
  129. Mounting Kernel Configuration File System...
  130. Starting Load/Save Random Seed...
  131. Starting Apply Kernel Variables...
  132. Starting Create System Users...
  133. run-credentials-systemd\x2dsysusers.service.mount
  134. [ OK ] Mounted FUSE Control File System.
  135. sys-fs-fuse-connections.mount
  136. [ OK ] Mounted Kernel Configuration File System.
  137. sys-kernel-config.mount
  138. [ OK ] Finished Set the console keyboard layout.
  139. keyboard-setup.service
  140. [ OK ] Finished Coldplug All udev Devices.
  141. systemd-udev-trigger.service
  142. Starting Helper to synchronize boot up for ifupdown...
  143. [ OK ] Finished Load/Save Random Seed.
  144. systemd-random-seed.service
  145. [ OK ] Finished Create System Users.
  146. systemd-sysusers.service
  147. [ OK ] Finished Helper to synchronize boot up for ifupdown.
  148. ifupdown-pre.service
  149. Starting Create Static Device Nodes in /dev...
  150. [ OK ] Finished Apply Kernel Variables.
  151. systemd-sysctl.service
  152. [ OK ] Finished Create Static Device Nodes in /dev.
  153. systemd-tmpfiles-setup-dev.service
  154. [ OK ] Reached target Preparation for Local File Systems.
  155. Mounting /tmp...
  156. Starting Rule-based Manage…for Device Events and Files...
  157. [ OK ] Mounted /tmp.
  158. tmp.mount
  159. [ OK ] Reached target Local File Systems.
  160. Starting Armbian ZRAM config...
  161. Starting Set console font and keymap...
  162. Starting Raise network interfaces...
  163. Starting Tell Plymouth To Write Out Runtime Data...
  164. Starting Set Up Additional Binary Formats...
  165. [ OK ] Finished Set console font and keymap.
  166. console-setup.service
  167. [ OK ] Finished Tell Plymouth To Write Out Runtime Data.
  168. plymouth-read-write.service
  169. Mounting Arbitrary Executable File Formats File System...
  170. [ OK ] Mounted Arbitrary Executable File Formats File System.
  171. proc-sys-fs-binfmt_misc.mount
  172. [ OK ] Finished Set Up Additional Binary Formats.
  173. systemd-binfmt.service
  174. [ OK ] Started Rule-based Manager for Device Events and Files.
  175. systemd-udevd.service
  176. Starting Show Plymouth Boot Screen...
  177. [ OK ] Started Show Plymouth Boot Screen.
  178. [ OK ] Started Forward Password R…s to Plymouth Directory Watch.
  179. plymouth-start.service
  180. [ OK ] Reached target Local Encrypted Volumes.
  181. [ OK ] Finished Raise network interfaces.
  182. networking.service
  183. dev-zram0.swap
  184. [ OK ] Reached target Hardware activated USB gadget.
  185. [ OK ] Found device /dev/ttyS0.
  186. [ OK ] Finished Armbian ZRAM config.
  187. armbian-zram-config.service
  188. Starting Armbian memory supported logging...
  189. var-log.hdd.mount
  190. var-log.mount
  191. Starting Load Kernel Module efi_pstore...
  192. [ OK ] Finished Load Kernel Module efi_pstore.
  193. [ OK ] Finished Armbian memory supported logging.
  194. armbian-ramlog.service
  195. Starting Journal Service...
  196. [ OK ] Started Journal Service.
  197. systemd-journald.service
  198. Starting Flush Journal to Persistent Storage...
  199. [ OK ] Finished Flush Journal to Persistent Storage.
  200. systemd-journal-flush.service
  201. Starting Create Volatile Files and Directories...
  202. systemd-tmpfiles-setup.service
  203. [ OK ] Finished Create Volatile Files and Directories.
  204. Mounting RPC Pipe File System...
  205. [ OK ] Started Entropy Daemon based on the HAVEGE algorithm.
  206. haveged.service
  207. Starting RPC bind portmap service...
  208. Starting Network Name Resolution...
  209. Starting Record System Boot/Shutdown in UTMP...
  210. [ OK ] Started RPC bind portmap service.
  211. rpcbind.service
  212. [ OK ] Mounted RPC Pipe File System.
  213. run-rpc_pipefs.mount
  214. [ OK ] Finished Record System Boot/Shutdown in UTMP.
  215. systemd-update-utmp.service
  216. [ OK ] Reached target rpc_pipefs.target.
  217. [ OK ] Reached target RPC Port Mapper.
  218. [ OK ] Reached target System Initialization.
  219. [ OK ] Started CUPS Scheduler.
  220. [ OK ] Started Daily Cleanup of Temporary Directories.
  221. [ OK ] Reached target Path Units.
  222. [ OK ] Listening on CUPS Scheduler.
  223. [ OK ] Reached target Socket Units.
  224. [ OK ] Listening on D-Bus System Message Bus Socket.
  225. Starting Armbian hardware monitoring...
  226. Starting Armbian hardware optimization...
  227. [ OK ] Reached target NFS client services.
  228. [ OK ] Reached target Preparation for Remote File Systems.
  229. [ OK ] Reached target Remote File Systems.
  230. [ OK ] Finished Armbian hardware monitoring.
  231. armbian-hardware-monitor.service
  232. [ OK ] Finished Armbian hardware optimization.
  233. armbian-hardware-optimize.service
  234. [ OK ] Reached target Basic System.
  235. Starting Save/Restore Sound Card State...
  236. Starting Bluetooth management mechanism...
  237. [ OK ] Started Regular background program processing daemon.
  238. cron.service
  239. [ OK ] Started D-Bus System Message Bus.
  240. dbus.service
  241. Starting Network Manager...
  242. [ OK ] Started Save initial kernel messages after boot.
  243. dmesg.service
  244. Starting Remove Stale Onli…t4 Metadata Check Snapshots...
  245. Starting Initialize hardware monitoring sensors...
  246. Starting LSB: Load kernel …d to enable cpufreq scaling...
  247. Starting LSB: rng-tools (Debian variant)...
  248. Starting System Logging Service...
  249. Starting Resets System Activity Logs...
  250. Starting User Login Management...
  251. Starting Disk Manager...
  252. Starting WPA supplicant...
  253. alsa-restore.service
  254. [ OK ] Finished Save/Restore Sound Card State.
  255. [ OK ] Reached target Sound Card.
  256. [ OK ] Finished Resets System Activity Logs.
  257. sysstat.service
  258. [ OK ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
  259. [ OK ] Finished Initialize hardware monitoring sensors.
  260. lm-sensors.service
  261. [ OK ] Started LSB: rng-tools (Debian variant).
  262. rng-tools-debian.service
  263. [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling.
  264. loadcpufreq.service
  265. Starting LSB: set CPUFreq kernel parameters...
  266. sys-kernel-debug-tracing.mount
  267. [ OK ] Started LSB: set CPUFreq kernel parameters.
  268. cpufrequtils.service
  269. Starting LSB: Set sysfs variables from /etc/sysfs.conf...
  270. [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
  271. sysfsutils.service
  272. [ OK ] Started System Logging Service.
  273. rsyslog.service
  274. [ OK ] Started User Login Management.
  275. systemd-logind.service
  276. [ OK ] Started WPA supplicant.
  277. wpa_supplicant.service
  278. [ OK ] Started Network Name Resolution.
  279. systemd-resolved.service
  280. [ OK ] Reached target Host and Network Name Lookups.
  281. Starting Authorization Manager...
  282. [ OK ] Started Authorization Manager.
  283. polkit.service
  284. [ OK ] Started Network Manager.
  285. NetworkManager.service
  286. [ OK ] Reached target Network.
  287. [ OK ] Reached target Network is Online.
  288. [ OK ] Started Download data for …ailed at package install time.
  289. Starting chrony, an NTP client/server...
  290. Starting CUPS Scheduler...
  291. Starting OpenVPN service...
  292. Starting /etc/rc.local Compatibility...
  293. Starting Notify NFS peers of a restart...
  294. Starting OpenBSD Secure Shell server...
  295. Starting Permit User Sessions...
  296. [ OK ] Started Unattended Upgrades Shutdown.
  297. unattended-upgrades.service
  298. [ OK ] Started vnStat network traffic monitor.
  299. vnstat.service
  300. [ OK ] Finished OpenVPN service.
  301. openvpn.service
  302. [ OK ] Started /etc/rc.local Compatibility.
  303. rc-local.service
  304. [ OK ] Started Notify NFS peers of a restart.
  305. rpc-statd-notify.service
  306. [ OK ] Finished Permit User Sessions.
  307. systemd-user-sessions.service
  308. Starting Light Display Manager...
  309. Starting Hold until boot process finishes up...
  310. Starting Hostname Service...
  311. [ OK ] Started Disk Manager.
  312. udisks2.service
  313. [ OK ] Started CUPS Scheduler.
  314. cups.service
  315. [ 43.099387] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  316. [ 43.483223] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  317. [ 43.559870] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  318. [ 43.629423] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  319. [ 43.701033] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  320. [ 43.779443] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  321. [ 43.841643] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  322. [ 43.909255] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  323. [ 43.964688] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  324. [ 44.019673] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  325. [ 44.079495] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  326. [ 44.144465] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  327. [ 44.320538] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  328. [ 44.396129] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  329. [ 44.459770] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  330. [ 44.526030] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  331. [ 44.591934] sun7i-dwmac 1c50000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -22)
  332.  
  333. Armbian 24.5.0-trunk.412 jammy ttyS0
  334.  
  335. cubieboard2 login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!