SHARE
TWEET

DSL-2500 openwrt boot OK1

mgmzog May 1st, 2014 516 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. CFE version 1.0.37-12.1 for BCM96338 (32bit,SP,BE)
  2. Build Date: Mon Jun  9 01:35:26 CST 2008 (root@localhost.localdomain)
  3. Copyright (C) 2000-2006 Broadcom Corporation.
  4.  
  5. Boot Address 0xbfc00000
  6.  
  7. Initializing Arena.
  8. Initializing Devices.
  9. Serial flash device: name NXW25P16, id 0xef14, size 2048KB
  10. Auto-negotiation timed-out
  11. 10 MB Half-Duplex (assumed)
  12. CPU type 0x29010: 240MHz
  13. Total memory: 33554432 bytes (32MB)
  14.  
  15. Total memory used by CFE:  0x80401000 - 0x80528710 (1210128)
  16. Initialized Data:          0x8041D740 - 0x8041FF30 (10224)
  17. BSS Area:                  0x8041FF30 - 0x80426710 (26592)
  18. Local Heap:                0x80426710 - 0x80526710 (1048576)
  19. Stack Area:                0x80526710 - 0x80528710 (8192)
  20. Text (code) segment:       0x80401000 - 0x8041D734 (116532)
  21. Boot area (physical):      0x00529000 - 0x00569000
  22. Relocation Factor:         I:00000000 - D:00000000
  23.  
  24. Board IP address                  : 192.168.1.100:ffffff00  
  25. Host IP address                   : 192.168.1.21  
  26. Gateway IP address                :  
  27. Run from flash/host (f/h)         : f  
  28. Default host run file name        : vmlinux  
  29. Default host flash file name      : bcm963xx_fs_kernel  
  30. Boot delay (0-9 seconds)          : 1  
  31. Board Id (0-14)                   : 96332CG_F4W  
  32. Number of MAC Addresses (1-32)    : 11  
  33. Base MAC Address                  : 00:24:01:5b:e0:84  
  34. PSI Size (1-64) KBytes            : 24  
  35.  
  36. *** Press any key to stop auto run (1 seconds) ***
  37. Auto run second count down: 110
  38. Booting from only image (0xbfc10000) ...
  39. Code Address: 0x80010000, Entry Address: 0x80010000
  40. Decompression OK!
  41. Entry at 0x80010000
  42. Closing network.
  43. Starting program at 0x80010000
  44. [    0.000000] Linux version 3.10.36 (archie@build41) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.01 r40569) ) #33 Tue Apr 29 22:20:28 EEST 2014
  45. [    0.000000] Detected Broadcom 0x6338 CPU revision a2
  46. [    0.000000] CPU frequency is 240 MHz
  47. [    0.000000] 32MB of RAM installed
  48. [    0.000000] registering 8 GPIOs
  49. [    0.000000] board_bcm963xx: Boot address 0xbfc00000
  50. [    0.000000] board_bcm963xx: CFE version: unknown
  51. [    0.000000] bootconsole [early0] enabled
  52. [    0.000000] CPU revision is: 00029010 (Broadcom BCM6338)
  53. [    0.000000] board_bcm963xx: board name: 96332CG_F4W
  54. [    0.000000] Determined physical RAM map:
  55. [    0.000000]  memory: 02000000 @ 00000000 (usable)
  56. [    0.000000] Initrd not found or empty - disabling initrd
  57. [    0.000000] Zone ranges:
  58. [    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
  59. [    0.000000] Movable zone start for each node
  60. [    0.000000] Early memory node ranges
  61. [    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
  62. [    0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
  63. [    0.000000] Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes
  64. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
  65. [    0.000000] Kernel command line:  root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  66. [    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  67. [    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  68. [    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  69. [    0.000000] Memory: 29476k/32768k available (2102k kernel code, 3292k reserved, 342k data, 240k init, 0k highmem)
  70. [    0.000000] NR_IRQS:256
  71. [    0.000000] Calibrating delay loop... 237.82 BogoMIPS (lpj=475648)
  72. [    0.040000] pid_max: default: 32768 minimum: 301
  73. [    0.044000] Mount-cache hash table entries: 512
  74. [    0.060000] NET: Registered protocol family 16
  75. [    0.124000] bio: create slab <bio-0> at 0
  76. [    0.144000] Switching to clocksource MIPS
  77. [    0.172000] NET: Registered protocol family 2
  78. [    0.180000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
  79. [    0.188000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
  80. [    0.192000] TCP: Hash tables configured (established 512 bind 512)
  81. [    0.200000] TCP: reno registered
  82. [    0.204000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  83. [    0.212000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  84. [    0.220000] NET: Registered protocol family 1
  85. [    0.232000] audit: initializing netlink socket (disabled)
  86. [    0.240000] type=2000 audit(0.239:1): initialized
  87. [    0.248000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  88. [    0.252000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  89. [    0.264000] msgmni has been set to 57
  90. [    0.272000] io scheduler noop registered
  91. [    0.276000] io scheduler deadline registered (default)
  92. [    0.288000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0300 (irq = 10) is a bcm63xx_uart
  93. [    0.296000] console [ttyS0] enabled, bootconsole disabled
  94. [    0.296000] console [ttyS0] enabled, bootconsole disabled
  95. [    0.328000] m25p80 spi0.0: found w25x16, expected m25p80
  96. [    0.336000] m25p80 spi0.0: w25x16 (2048 Kbytes)
  97. [    0.344000] bcm63xxpart: CFE boot tag found with version 6 and board type 96332CG_F4W
  98. [    0.352000] bcm63xxpart: Partition 0 is CFE offset 0 and length 10000
  99. [    0.360000] bcm63xxpart: Partition 1 is kernel offset 10100 and length dff00
  100. [    0.368000] bcm63xxpart: Partition 2 is rootfs offset f0000 and length 100000
  101. [    0.376000] bcm63xxpart: Partition 3 is nvram offset 1f0000 and length 10000
  102. [    0.384000] bcm63xxpart: Partition 4 is linux offset 10000 and length 1e0000
  103. [    0.392000] bcm63xxpart: Spare partition is offset 170004 and length 7fffc
  104. [    0.396000] 5 bcm63xxpart partitions found on MTD device spi0.0
  105. [    0.404000] Creating 5 MTD partitions on "spi0.0":
  106. [    0.408000] 0x000000000000-0x000000010000 : "CFE"
  107. [    0.424000] 0x000000010100-0x0000000f0000 : "kernel"
  108. [    0.428000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  109. [    0.448000] 0x0000000f0000-0x0000001f0000 : "rootfs"
  110. [    0.464000] mtd: device 2 (rootfs) set to be root filesystem
  111. [    0.472000] mtd: partition "rootfs_data" created automatically, ofs=0x170000, len=0x80000
  112. [    0.480000] 0x000000170000-0x0000001f0000 : "rootfs_data"
  113. [    0.492000] 0x0000001f0000-0x000000200000 : "nvram"
  114. [    0.508000] 0x000000010000-0x0000001f0000 : "linux"
  115. [    0.520000] bcm63xx-spi bcm63xx-spi: at 0xfffe0c00 (irq 9, FIFOs size 63)
  116. [    0.556000] libphy: bcm63xx_enet MII bus: probed
  117. [    0.560000] bcm63xx_enet bcm63xx_enet.0: attached PHY at address 0 [Generic PHY]
  118. [    0.580000] bcm63xx-wdt bcm63xx-wdt:  started, timer margin: 30 sec
  119. [    0.600000] TCP: cubic registered
  120. [    0.604000] NET: Registered protocol family 17
  121. [    0.608000] 8021q: 802.1Q VLAN Support v1.8
  122. [    0.740000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  123. [    0.752000] Freeing unused kernel memory: 240K (80274000 - 802b0000)
  124. procd: Console is alive
  125. procd: - watchdog -
  126. procd: - preinit -
  127. [   12.772000] Button Hotplug driver version 0.4.1
  128. Press the [f] key and hit [enter] to enter failsafe mode
  129. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  130. jffs2 is ready
  131. [   18.192000] jffs2: notice: (200) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 6 of xref (0 dead, 0 orphan) found.
  132. switching to jffs2
  133. procd: - early -
  134. procd: - watchdog -
  135. procd: - ubus -
  136. procd: - init -
  137. Please press Enter to activate this console.
  138. procd: - init complete -
  139.  
  140.  
  141.  
  142. BusyBox v1.19.4 (2014-04-28 22:50:28 EEST) built-in shell (ash)
  143. Enter 'help' for a list of built-in commands.
  144.  
  145.   _______                     ________        __
  146.  |       |.-----.-----.-----.|  |  |  |.----.|  |_
  147.  |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
  148.  |_______||   __|_____|__|__||________||__|  |____|
  149.           |__| W I R E L E S S   F R E E D O M
  150.  -----------------------------------------------------
  151.  BARRIER BREAKER (Bleeding Edge, r40569)
  152.  -----------------------------------------------------
  153.   * 1/2 oz Galliano         Pour all ingredients into
  154.   * 4 oz cold Coffee        an irish coffee mug filled
  155.   * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  156.   * 2 tsp. Creme de Cacao
  157.  -----------------------------------------------------
  158. root@OpenWrt:/#
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top