API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Mar 20th, 2019
72
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.23 KB | None | 0 0
raw download clone embed print report
  1.  
  2. [2019-03-20 20:50:23] [Output] : ★ Stefan Gocevski reaches inside his pocket as he takes out his gloves, sliding them on.
  3.  
  4. [2019-03-20 20:50:32] [Output] : ★ Stefan Gocevski walks towards the lift as he presses the red button, lifting the car a little bit off the..
  5.  
  6. [2019-03-20 20:50:38] [Output] : ★ ground. ((Stefan Gocevski))
  7.  
  8. [2019-03-20 20:50:45] [Output] : ★ Stefan Gocevski shakes the body to see if the car is stable, lifting it a bit more once done.
  9.  
  10. [2019-03-20 20:50:52] [Output] : ★ Stefan Gocevski walks towards the shelf as he reaches the socket box, taking out a 19mm socket out of..
  11.  
  12. [2019-03-20 20:50:59] [Output] : ★ it as he returns the box grabbing the impact gun as he slides the socket in it. ((Stefan Gocevski))
  13.  
  14. [2019-03-20 20:51:07] [Output] : ★ Stefan Gocevski walks towards the car's front left tire as he leans over it, using the impact gun to..
  15.  
  16. [2019-03-20 20:51:14] [Output] : ★ unscrew the lugs from the wheel as he collects them inside of his pocket, leaving the.. ((Stefan Gocevski))
  17.  
  18. [2019-03-20 20:51:27] [Output] : ★ gun aside as he uses both of his hand to remove the wheel, placing it under the lift. ((Stefan Gocevski))
  19.  
  20. [2019-03-20 20:53:18] [Output] : ★ Stefan Gocevski grabs the impact gun as he walks towards the car's front right side as he leans over the..
  21.  
  22. [2019-03-20 20:53:28] [Output] : ★ wheel as he uses the impact gun to remove the lugs from the wheel, collecting them.. ((Stefan Gocevski))
  23.  
  24. [2019-03-20 20:53:35] [Output] : ★ inside of his pocket as he leaves the gun on the ground. ((Stefan Gocevski))
  25.  
  26. [2019-03-20 20:53:45] [Output] : ★ Stefan Gocevski using both of his hands removes the wheel as he places it under the lift.
  27.  
  28. [2019-03-20 20:53:55] [Output] : ★ Stefan Gocevski de-attaches the brake lines from the OEM as well as all the hardware attached to it..
  29.  
  30. [2019-03-20 20:54:00] [Output] : ★ as he places them aside. ((Stefan Gocevski))
  31.  
  32. [2019-03-20 20:54:07] [Output] : ★ Stefan Gocevski grabs the impact gun as he uses it to remove the lugs from the lower bracklet of the shock..
  33.  
  34. [2019-03-20 20:54:13] [Output] : ★ to the lower control arm. ((Stefan Gocevski))
  35.  
  36. [2019-03-20 20:54:23] [Output] : ★ Stefan Gocevski after done disconects the sway bar end link to disconnect one end of the suspension..
  37.  
  38. [2019-03-20 20:54:28] [Output] : ★ from the other. ((Stefan Gocevski))
  39.  
  40. [2019-03-20 20:54:37] [Output] : ★ Stefan Gocevski after done loosens up the lugs from the top of the engine's bay to loosen the shock..
  41.  
  42. [2019-03-20 20:54:45] [Output] : ★ assembly from the vehicle. ((Stefan Gocevski))
  43.  
  44. [2019-03-20 20:54:54] [Output] : ★ Stefan Gocevski makes sure the lugs are not removed as he makes sure that everything's clear.
  45.  
  46. [2019-03-20 20:55:04] [Output] : ★ Once is clear carefully removes the shock assembly from the vehicle as he tries to avoid.. ((Stefan Gocevski))
  47.  
  48. [2019-03-20 20:55:11] [Output] : ★ contact with any of the suspension or brake components. ((Stefan Gocevski))
  49.  
  50. [2019-03-20 20:55:17] [Output] : ★ Stefan Gocevski makes sure he is supporting the suspension assembly as he removes the hardware.
  51.  
  52. [2019-03-20 20:55:52] [Output] : ★ Stefan Gocevski upon done removing the suspension places it aside as he moves towards the front left wheel.
  53.  
  54. [2019-03-20 20:56:08] [Output] : ★ Stefan Gocevski de-attaches the brake lines from the OEM as well as all the hardware attached to it..
  55.  
  56. [2019-03-20 20:56:13] [Output] : ★ as he places them aside. ((Stefan Gocevski))
  57.  
  58. [2019-03-20 20:56:19] [Output] : ★ Stefan Gocevski grabs the impact gun as he uses it to remove the lugs from the lower bracklet of the shock..
  59.  
  60. [2019-03-20 20:56:26] [Output] : ★ to the lower control arm. ((Stefan Gocevski))
  61.  
  62. [2019-03-20 20:56:52] [Output] : ★ Stefan Gocevski after done disconects the sway bar end link to disconnect one end of the suspension..
  63.  
  64. [2019-03-20 20:56:56] [Output] : ★ from the other. ((Stefan Gocevski))
  65.  
  66. [2019-03-20 20:57:06] [Output] : ★ Stefan Gocevski after done loosens up the lugs from the top of the engine's bay to loosen the shock..
  67.  
  68. [2019-03-20 20:57:10] [Output] : ★ assembly from the vehicle. ((Stefan Gocevski))
  69.  
  70. [2019-03-20 20:57:33] [Output] : ★ Stefan Gocevski makes sure the lugs are not removed as he makes sure that everything's clear.
  71.  
  72. [2019-03-20 20:57:40] [Output] : ★ Once is clear carefully removes the shock assembly from the vehicle as he tries to avoid.. ((Stefan Gocevski))
  73.  
  74. [2019-03-20 20:57:51] [Output] : ★ contact with any of the suspension or brake components. ((Stefan Gocevski))
  75.  
  76. [2019-03-20 20:57:59] [Output] : ★ Stefan Gocevski makes sure he is supporting the suspension assembly as he removes the hardware.
  77.  
  78. [2019-03-20 20:58:28] [Output] : ★ Stefan Gocevski upon done places it near the other suspension he left before.
  79.  
  80. [2019-03-20 20:58:55] [Output] : ★ Stefan Gocevski walks towards the rear right side of the car, as he leans over grabbing the impact gun.
  81.  
  82. [2019-03-20 20:59:50] [Output] : ★ Stefan Gocevski using the impact gun removes the lugs from the wheel as he collects them inside his pocket..
  83.  
  84. [2019-03-20 21:00:04] [Output] : ★ removing the wheel as he places it under the lift. ((Stefan Gocevski))
  85.  
  86. [2019-03-20 21:00:20] [Output] : ★ Stefan Gocevski after done de-attaches the brake lines and other hardware attached to the OEM..
  87.  
  88. [2019-03-20 21:00:32] [Output] : ★ shock assembly saving all the parts he removed. ((Stefan Gocevski))
  89.  
  90. [2019-03-20 21:00:39] [Output] : ★ Stefan Gocevski upon done removes the single nut and bolt that is supporting the single nut and bolt that..
  91.  
  92. [2019-03-20 21:00:49] [Output] : ★ is supporting the lower end of the shoct assembly placing all the hardware aside for further.. ((Stefan Gocevski))
  93.  
  94. [2019-03-20 21:00:54] [Output] : ★ use. ((Stefan Gocevski))
  95.  
  96. [2019-03-20 21:01:19] [Output] : ★ Stefan Gocevski upone done removes the lugs holding up the shock as he makes sure he's doing it..
  97.  
  98. [2019-03-20 21:01:24] [Output] : ★ carefully as the suspension is no longer supported. ((Stefan Gocevski))
  99.  
  100. [2019-03-20 21:01:35] [Output] : ★ Stefan Gocevski after done removes the shock assembly from the vehicle with the string impact.
  101.  
  102. [2019-03-20 21:01:53] [Output] : ★ Stefan Gocevski places the suspension near the other ones he left before as he grabs the impact gun..
  103.  
  104. [2019-03-20 21:02:08] [Output] : ★ moving towards the rear right side of the car as he leans over the wheel, using the impact.. ((Stefan Gocevski))
  105.  
  106. [2019-03-20 21:02:33] [Output] : ★ gun to remove the lugs off the wheel as he pockets them, as he uses both of his hands to.. ((Stefan Gocevski))
  107.  
  108. [2019-03-20 21:02:42] [Output] : ★ remove the wheel placing it under the lift. ((Stefan Gocevski))
  109.  
  110. [2019-03-20 21:02:54] [Output] : ★ Stefan Gocevski after done de-attaches the brake lines and other hardware attached to the OEM shock assembly
  111.  
  112. [2019-03-20 21:02:59] [Output] : ★ saving all the parts he removed. ((Stefan Gocevski))
  113.  
  114. [2019-03-20 21:03:05] [Output] : ★ Stefan Gocevski upon done removes the single nut and bolt that is supporting the single nut and bolt that..
  115.  
  116. [2019-03-20 21:03:16] [Output] : ★ is supporting the lower end of the shoct assembly placing all the hardware aside for further use ((Stefan Gocevski))
  117.  
  118. [2019-03-20 21:03:28] [Output] : ★ Stefan Gocevski upone done removes the lugs holding up the shock as he makes sure he's doing it..
  119.  
  120. [2019-03-20 21:03:34] [Output] : ★ carefully as the suspension is no longer supported. ((Stefan Gocevski))
  121.  
  122. [2019-03-20 21:03:41] [Output] : ★ Stefan Gocevski after done removes the shock assembly from the vehicle with the string impact.
  123.  
  124. [2019-03-20 21:04:02] [Output] : ★ Stefan Gocevski brings the suspension to the ones he previously left as he sights.
  125.  
  126. [2019-03-20 21:05:19] [Output] : ★ Stefan Gocevski grabs his tape as he uses it to mesure the lenght of the coil string as he takes note of it.
  127.  
  128. [2019-03-20 21:06:00] [Output] : ★ Stefan Gocevski upon done measuring the extended string he grabs the coil compressor to remove the string..
  129.  
  130. [2019-03-20 21:06:28] [Output] : ★ removing it as it's compressed from the tool to be easly and safely removed. ((Stefan Gocevski))
  131.  
  132. [2019-03-20 21:09:15] [Output] : ★ Stefan Gocevski upon done with one of the springs grab the other one as he grabs the tape mesuring it..
  133.  
  134. [2019-03-20 21:09:43] [Output] : ★ upon done takes a note as he grabs the coil compressor to remove the spring. ((Stefan Gocevski))
  135.  
  136. [2019-03-20 21:10:19] [Output] : ★ the coil compressor compresses the spring as it alowes to be removed safely. ((Stefan Gocevski))
  137.  
  138. [2019-03-20 21:10:36] [Output] : ★ Stefan Gocevski upon done grabs the 3rd spring as he uses the tape to mesure it, taking notes, grabbing the..
  139.  
  140. [2019-03-20 21:10:45] [Output] : ★ coil compressor to compress it and remove it safely. ((Stefan Gocevski))
  141.  
  142. [2019-03-20 21:10:59] [Output] : ★ Stefan Gocevski upon done moves to the last spring as he measures it using the tape and..
  143.  
  144. [2019-03-20 21:11:15] [Output] : ★ removes it upon compressing it with the coil spring compressor, safely. ((Stefan Gocevski))
  145.  
  146. [2019-03-20 21:12:01] [Output] : ★ Stefan Gocevski after the springs are removed grabs the tape as he measures them one-by one again
  147.  
  148. [2019-03-20 21:12:39] [Output] : ★ Stefan Gocevski upon done uses a white pencil to mark the coils where he wants to cut, measuring..
  149.  
  150. [2019-03-20 21:13:31] [Output] : ★ 5cm lower then the current one as he repeats doing the same for the rest 3 springs. ((Stefan Gocevski))
  151.  
  152. [2019-03-20 21:14:40] [Output] : ★ the strings would be marked 5cm from the bottom up. ((Stefan Gocevski))
  153.  
  154. [2019-03-20 21:15:07] [Output] : ★ Stefan Gocevski upon done grabs the angle grinder as he uses it to cut the springs one by one where the..
  155.  
  156. [2019-03-20 21:15:23] [Output] : ★ pencil marker is as he throws the small peaces he cut. ((Stefan Gocevski))
  157.  
  158. [2019-03-20 21:15:35] [Output] : ★ Stefan Gocevski repeats doing so for the rest of the strings, cutting them one by one.
  159.  
  160. [2019-03-20 21:16:32] [Output] : ★ Stefan Gocevski upon done uses the coil compressor to install the spring on the strut, continuing with the 2nd..
  161.  
  162. [2019-03-20 21:16:35] [Output] : ★ one after done. ((Stefan Gocevski))
  163.  
  164. [2019-03-20 21:16:55] [Output] : ★ Stefan Gocevski upon done with the 2nd one continues with the 3rd one as he uses the coil compressor..
  165.  
  166. [2019-03-20 21:17:11] [Output] : ★ to compress the string upon installing it to the strut. ((Stefan Gocevski))
  167.  
  168. [2019-03-20 21:17:53] [Output] : ★ Stefan Gocevski after done with the 3rd one repeats the same with the 4th one using the..
  169.  
  170. [2019-03-20 21:18:05] [Output] : ★ coil compressor to compress the string as he installs it on the strut. ((Stefan Gocevski))
  171.  
  172. [2019-03-20 21:18:33] [Output] : ★ Stefan Gocevski after done places the rear suspension near the left tires and the front near the front ones.
  173.  
  174. [2019-03-20 21:19:40] [Output] : ★ Stefan Gocevski walks to the front left side first as he starts mounting the coil.
  175.  
  176. [2019-03-20 21:19:48] [Output] : ★ Stefan Gocevski lifts the damper kit trough the underside of the chassis into position where the studs go..
  177.  
  178. [2019-03-20 21:20:02] [Output] : ★ trough the OEM bolt-holders on the strut tower mount. ((Stefan Gocevski))
  179.  
  180. [2019-03-20 21:20:17] [Output] : ★ Stefan Gocevski threads the nuts untill he sees at least 2 of the threads past the top of the nut from the..
  181.  
  182. [2019-03-20 21:20:22] [Output] : ★ stud on the damper kit, not tightening them. ((Stefan Gocevski))
  183.  
  184. [2019-03-20 21:20:29] [Output] : ★ Stefan Gocevski using them OEM hardware replaces the lower mounting hardware into the lower bracklet..
  185.  
  186. [2019-03-20 21:20:34] [Output] : ★ as he hand tightens them. ((Stefan Gocevski))
  187.  
  188. [2019-03-20 21:20:52] [Output] : ★ Stefan Gocevski after done re-attaches the prevously de-attached brake lines to the OEM shock body.
  189.  
  190. [2019-03-20 21:20:59] [Output] : ★ Reuses the OEM hardware to do so. ((Stefan Gocevski))
  191.  
  192. [2019-03-20 21:21:07] [Output] : ★ Stefan Gocevski torques the top nots on the top of the damper assembly to the OEM torgue specifications as..
  193.  
  194. [2019-03-20 21:21:23] [Output] : ★ he torques the lower hardware at the bottom of the damper to OEM torque specifications as.. ((Stefan Gocevski))
  195.  
  196. [2019-03-20 21:21:46] [Output] : ★ well. ((Stefan Gocevski))
  197.  
  198. [2019-03-20 21:22:08] [Output] : ★ Stefan Gocevski grabs the wheel from under the lift as he places in place, grabbing the lugs out of his pocket.
  199. [2019-03-20 21:22:30] [Output] : ★ as he hand-screws them on, using the impact gun after that to tighten them doing a star pattern. ((Stefan Gocevski))
  200.  
  201. [2019-03-20 21:22:59] [Output] : ★ Stefan Gocevski upon done moves to the front right side of the car as he starts mounting the coil.
  202.  
  203. [2019-03-20 21:23:18] [Output] : ★ Stefan Gocevski lifts the damper kit trough the underside of the chassis into position where the studs go..
  204.  
  205. [2019-03-20 21:23:24] [Output] : ★ trough the OEM bolt-holders on the strut tower mount. ((Stefan Gocevski))
  206.  
  207. [2019-03-20 21:23:30] [Output] : ★ Stefan Gocevski threads the nuts untill he sees at least 2 of the threads past the top of the nut from the..
  208.  
  209. [2019-03-20 21:23:35] [Output] : ★ stud on the damper kit, not tightening them. ((Stefan Gocevski))
  210.  
  211. [2019-03-20 21:23:41] [Output] : ★ Stefan Gocevski using them OEM hardware replaces the lower mounting hardware into the lower bracklet..
  212.  
  213. [2019-03-20 21:23:45] [Output] : ★ as he hand tightens them. ((Stefan Gocevski))
  214.  
  215. [2019-03-20 21:23:50] [Output] : ★ Stefan Gocevski after done re-attaches the prevously de-attached brake lines to the OEM shock body.
  216.  
  217. [2019-03-20 21:23:57] [Output] : ★ Reuses the OEM hardware to do so. ((Stefan Gocevski))
  218.  
  219. [2019-03-20 21:24:02] [Output] : ★ Stefan Gocevski torques the top nots on the top of the damper assembly to the OEM torgue specifications as..
  220.  
  221. [2019-03-20 21:24:09] [Output] : ★ he torques the lower hardware at the bottom of the damper to OEM torque specifications as.. ((Stefan Gocevski))
  222.  
  223. [2019-03-20 21:24:11] [Output] : ★ well. ((Stefan Gocevski))
  224.  
  225. [2019-03-20 21:24:30] [Output] : ★ Stefan Gocevski upon done, grabs the wheel from under the lift as he slides it on, taking some lugs out of..
  226.  
  227. [2019-03-20 21:24:43] [Output] : ★ his pocket as he hand-screws them in, upon done grabs the impact gun as he uses it.. ((Stefan Gocevski))
  228.  
  229. [2019-03-20 21:24:56] [Output] : ★ to tighten the lugs doing a star pattern. ((Stefan Gocevski))
  230.  
  231. [2019-03-20 21:25:09] [Output] : ★ Stefan Gocevski upon done moves to the rear right side of the car as he starts mounting the coil.
  232.  
  233. [2019-03-20 21:25:42] [Output] : ★ Stefan Gocevski places it in the same location as the OEM suspension.
  234.  
  235. [2019-03-20 21:25:50] [Output] : ★ upon done lifts the damer kit trough the underside of the chassis into postion where.. ((Stefan Gocevski))
  236.  
  237. [2019-03-20 21:25:56] [Output] : ★ the studs go trough the OEM bolt holes on the strut tower mount. ((Stefan Gocevski))
  238.  
  239. [2019-03-20 21:26:01] [Output] : ★ Stefan Gocevski upon done threads the nuts untill 2 of them threads past the top of the nut from the stud on
  240.  
  241. [2019-03-20 21:26:06] [Output] : ★ the damper kit as he doesn't tighten them. ((Stefan Gocevski))
  242.  
  243. [2019-03-20 21:26:11] [Output] : ★ Stefan Gocevski upon done replaces the lugs and any other hardware hand tightening them.
  244.  
  245. [2019-03-20 21:26:20] [Output] : ★ Stefan Gocevski after he is done torques the lugs on top of the damper assembly to the vehicle specification
  246.  
  247. [2019-03-20 21:26:26] [Output] : ★ after he toques the bolt at the bottom of the damper to the vehicle specifications. ((Stefan Gocevski))
  248.  
  249. [2019-03-20 21:27:23] [Output] : ★ Stefan Gocevski attaches the brake lines and other hardware as he grabs the tire from under the lift..
  250.  
  251. [2019-03-20 21:27:37] [Output] : ★ sliding it in as he grabs some lugs out of his pocket, hand-screwing them in.. ((Stefan Gocevski))
  252. [2019-03-20 21:27:50] [Input] : do after he uses the impact gun to tighten them doing a star pattern.
  253. [2019-03-20 21:27:50] [Output] : ★ after he uses the impact gun to tighten them doing a star pattern. ((Stefan Gocevski))
  254.  
  255. [2019-03-20 21:28:07] [Output] : ★ Stefan Gocevski upon done moves to the rear left side of the car as he grabs the coil and starts installing it.
  256.  
  257. [2019-03-20 21:28:21] [Output] : ★ as he places it in the same location as the OEM suspension. ((Stefan Gocevski))
  258.  
  259. [2019-03-20 21:28:31] [Output] : ★ Stefan Gocevski upon done lifts the damer kit trough the underside of the chassis into postion where..
  260.  
  261. [2019-03-20 21:28:36] [Output] : ★ the studs go trough the OEM bolt holes on the strut tower mount. ((Stefan Gocevski))
  262.  
  263. [2019-03-20 21:28:41] [Output] : ★ Stefan Gocevski upon done threads the nuts untill 2 of them threads past the top of the nut from the stud on
  264.  
  265. [2019-03-20 21:28:46] [Output] : ★ the damper kit as he doesn't tighten them. ((Stefan Gocevski))
  266.  
  267. [2019-03-20 21:28:52] [Output] : ★ Stefan Gocevski upon done replaces the lugs and any other hardware hand tightening them.
  268.  
  269. [2019-03-20 21:29:03] [Output] : ★ Stefan Gocevski after he is done torques the lugs on top of the damper assembly to the vehicle specification
  270.  
  271. [2019-03-20 21:29:11] [Output] : ★ after he toques the bolt at the bottom of the damper to the veh specifications. ((Stefan Gocevski))
  272.  
  273. [2019-03-20 21:29:31] [Output] : ★ Stefan Gocevski attaches the brake lines and other harware as he grabs the wheel from under the..
  274.  
  275. [2019-03-20 21:29:47] [Output] : ★ lift sliding it on as he takes out the rest of the lugs hand screwing them in as he.. ((Stefan Gocevski))
  276.  
  277. [2019-03-20 21:29:55] [Output] : ★ uses the impact gun to tighten them upon done. ((Stefan Gocevski))
  278.  
  279. [2019-03-20 21:30:08] [Output] : ★ Stefan Gocevski collects the tools and the trash after done returning them on the shelf as he..
  280.  
  281. [2019-03-20 21:30:22] [Output] : ★ slides out his gloves, sighting and removing his sweat from his forehead. ((Stefan Gocevski))
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!