Advertisement
Bullet64

5_4_(2)

Oct 2nd, 2019
378
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 46.37 KB | None | 0 0
  1. U-Boot 2017.09-rockchip-ayufan-1065-g95f6152134 (Aug 26 2019 - 12:41:34 +0000)
  2.  
  3. Model: Pine64 RockPro64
  4. DRAM: 2 GiB
  5. DCDC_REG1@vdd_center: ; enabling
  6. DCDC_REG2@vdd_cpu_l: ; enabling
  7. DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
  8. DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
  9. LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
  10. LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
  11. LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
  12. LDO_REG4@vcc_sd: set 3300000 uV; enabling
  13. LDO_REG5@vcca3v0_codec: set 3000000 uV; enabling
  14. LDO_REG6@vcc_1v5: set 1500000 uV; enabling
  15. LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
  16. LDO_REG8@vcc_3v0: set 3000000 uV; enabling
  17. SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
  18. SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
  19. vcc1v8-s0@vcc1v8_s0: set 1800000 uV; enabling (ret: -38)
  20. dc-12v@dc_12v: set 12000000 uV; enabling (ret: -38)
  21. vcc-sys@vcc_sys: set 5000000 uV; enabling (ret: -38)
  22. vcc3v3-sys@vcc3v3_sys: set 3300000 uV; enabling (ret: -38)
  23. vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
  24. vdd-log@vdd_log: ; enabling (ret: -38)
  25. MMC: sdhci@fe330000: 0, dwmmc@fe320000: 1
  26. SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
  27. *** Warning - bad CRC, using default environment
  28.  
  29. In: serial@ff1a0000
  30. Out: serial@ff1a0000
  31. Err: serial@ff1a0000
  32. Model: Pine64 RockPro64
  33. normal boot
  34. Net: eth0: ethernet@fe300000
  35. Hit any key to stop autoboot: 0
  36. Card did not respond to voltage select!
  37. mmc_init: -95, time 20
  38. switch to partitions #0, OK
  39. mmc1 is current device
  40. Scanning mmc 1:7...
  41. Found /boot/extlinux/extlinux.conf
  42. Retrieving file: /boot/extlinux/extlinux.conf
  43. 2017 bytes read in 20 ms (97.7 KiB/s)
  44. select kernel
  45. 1: kernel-5.4.0-rc1-1120-ayufan-gf8639cacc398
  46. 2: kernel-5.4.0-rc1-1120-ayufan-gf8639cacc398-memtest
  47. 3: kernel-4.4.190-1233-rockchip-ayufan-gd3f1be0ed310
  48. 4: kernel-4.4.190-1233-rockchip-ayufan-gd3f1be0ed310-memtest
  49. Enter choice: 1: kernel-5.4.0-rc1-1120-ayufan-gf8639cacc398
  50. Retrieving file: /boot/initrd.img-5.4.0-rc1-1120-ayufan-gf8639cacc398
  51. 4550650 bytes read in 506 ms (8.6 MiB/s)
  52. Retrieving file: /boot/vmlinuz-5.4.0-rc1-1120-ayufan-gf8639cacc398
  53. 31166976 bytes read in 3324 ms (8.9 MiB/s)
  54. append: rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=62:03:b0:d6:dc:b3 4
  55. Retrieving file: /boot/dtbs/5.4.0-rc1-1120-ayufan-gf8639cacc398/rockchip/rk3399b
  56. 56621 bytes read in 92 ms (600.6 KiB/s)
  57. ## Flattened Device Tree blob at 01f00000
  58. Booting using the fdt blob at 0x1f00000
  59. Loading Ramdisk to 7daa9000, end 7deffffa ... OK
  60. Loading Device Tree to 000000007da98000, end 000000007daa8d2c ... OK
  61.  
  62. Starting kernel ...
  63.  
  64. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  65. [ 0.000000] Linux version 5.4.0-rc1-1120-ayufan-gf8639cacc398 (root@runner-f9
  66. [ 0.000000] Machine model: Pine64 RockPro64
  67. [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
  68. [ 0.000000] printk: bootconsole [uart8250] enabled
  69. [ 0.000000] efi: Getting EFI parameters from FDT:
  70. [ 0.000000] efi: UEFI not found.
  71. [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
  72. [ 0.000000] NUMA: No NUMA configuration found
  73. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007ffffff]
  74. [ 0.000000] NUMA: NODE_DATA [mem 0x7ebb1800-0x7ebb2fff]
  75. [ 0.000000] Zone ranges:
  76. [ 0.000000] DMA32 [mem 0x0000000000200000-0x000000007fffffff]
  77. [ 0.000000] Normal empty
  78. [ 0.000000] Movable zone start for each node
  79. [ 0.000000] Early memory node ranges
  80. [ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
  81. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
  82. [ 0.000000] psci: probing for conduit method from DT.
  83. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  84. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  85. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  86. [ 0.000000] psci: SMC Calling Convention v1.0
  87. [ 0.000000] percpu: Embedded 22 pages/cpu s53144 r8192 d28776 u90112
  88. [ 0.000000] Detected VIPT I-cache on CPU0
  89. [ 0.000000] CPU features: detected: ARM erratum 845719
  90. [ 0.000000] CPU features: detected: GIC system register CPU interface
  91. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
  92. [ 0.000000] Policy zone: DMA32
  93. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw pani4
  94. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  95. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes,)
  96. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  97. [ 0.000000] Memory: 2002436K/2095104K available (18684K kernel code, 2020K r)
  98. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  99. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  100. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
  101. [ 0.000000] Tasks RCU enabled.
  102. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 ji.
  103. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  104. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  105. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  106. [ 0.000000] GICv3: 988 SPIs implemented
  107. [ 0.000000] GICv3: 0 Extended SPIs implemented
  108. [ 0.000000] GICv3: Distributor has no Range Selector support
  109. [ 0.000000] GICv3: 16 PPIs implemented
  110. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  111. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  112. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  113. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7e080000 (flat,)
  114. [ 0.000000] ITS: using cache flushing for cmd queue
  115. [ 0.000000] GICv3: using LPI property table @0x000000007e040000
  116. [ 0.000000] GIC: using cache flushing for LPI property table
  117. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007e05000
  118. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
  119. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
  120. [ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x458 wi0
  121. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  122. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
  123. [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
  124. [ 0.003309] Console: colour dummy device 80x25
  125. [ 0.003739] printk: console [tty0] enabled
  126. [ 0.004140] printk: bootconsole [uart8250] disabled
  127. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  128. [ 0.000000] Linux version 5.4.0-rc1-1120-ayufan-gf8639cacc398 (root@runner-f9
  129. [ 0.000000] Machine model: Pine64 RockPro64
  130. [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
  131. [ 0.000000] printk: bootconsole [uart8250] enabled
  132. [ 0.000000] efi: Getting EFI parameters from FDT:
  133. [ 0.000000] efi: UEFI not found.
  134. [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
  135. [ 0.000000] NUMA: No NUMA configuration found
  136. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007ffffff]
  137. [ 0.000000] NUMA: NODE_DATA [mem 0x7ebb1800-0x7ebb2fff]
  138. [ 0.000000] Zone ranges:
  139. [ 0.000000] DMA32 [mem 0x0000000000200000-0x000000007fffffff]
  140. [ 0.000000] Normal empty
  141. [ 0.000000] Movable zone start for each node
  142. [ 0.000000] Early memory node ranges
  143. [ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
  144. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
  145. [ 0.000000] psci: probing for conduit method from DT.
  146. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  147. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  148. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  149. [ 0.000000] psci: SMC Calling Convention v1.0
  150. [ 0.000000] percpu: Embedded 22 pages/cpu s53144 r8192 d28776 u90112
  151. [ 0.000000] Detected VIPT I-cache on CPU0
  152. [ 0.000000] CPU features: detected: ARM erratum 845719
  153. [ 0.000000] CPU features: detected: GIC system register CPU interface
  154. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
  155. [ 0.000000] Policy zone: DMA32
  156. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw pani4
  157. [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  158. [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes,)
  159. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  160. [ 0.000000] Memory: 2002436K/2095104K available (18684K kernel code, 2020K r)
  161. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  162. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  163. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
  164. [ 0.000000] Tasks RCU enabled.
  165. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 ji.
  166. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  167. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  168. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  169. [ 0.000000] GICv3: 988 SPIs implemented
  170. [ 0.000000] GICv3: 0 Extended SPIs implemented
  171. [ 0.000000] GICv3: Distributor has no Range Selector support
  172. [ 0.000000] GICv3: 16 PPIs implemented
  173. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  174. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  175. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  176. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7e080000 (flat,)
  177. [ 0.000000] ITS: using cache flushing for cmd queue
  178. [ 0.000000] GICv3: using LPI property table @0x000000007e040000
  179. [ 0.000000] GIC: using cache flushing for LPI property table
  180. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007e05000
  181. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0}
  182. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@1}
  183. [ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x458 wi0
  184. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  185. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
  186. [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
  187. [ 0.003309] Console: colour dummy device 80x25
  188. [ 0.003739] printk: console [tty0] enabled
  189. [ 0.004140] printk: bootconsole [uart8250] disabled
  190. [ 0.004720] Calibrating delay loop (skipped), value calculated using timer f)
  191. [ 0.004756] pid_max: default: 32768 minimum: 301
  192. [ 0.004901] LSM: Security Framework initializing
  193. [ 0.005008] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, lin)
  194. [ 0.005044] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  195. [ 0.027363] ASID allocator initialised with 32768 entries
  196. [ 0.035356] rcu: Hierarchical SRCU implementation.
  197. [ 0.043501] Platform MSI: interrupt-controller@fee20000 domain created
  198. [ 0.043930] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@feed
  199. [ 0.048391] EFI services will not be available.
  200. [ 0.056411] smp: Bringing up secondary CPUs ...
  201. [ 0.088634] Detected VIPT I-cache on CPU1
  202. [ 0.088675] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  203. [ 0.088692] GICv3: CPU1: using allocated LPI pending table @0x000000007e06000
  204. [ 0.088743] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  205. [ 0.120704] Detected VIPT I-cache on CPU2
  206. [ 0.120735] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  207. [ 0.120749] GICv3: CPU2: using allocated LPI pending table @0x000000007e07000
  208. [ 0.120782] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  209. [ 0.152802] Detected VIPT I-cache on CPU3
  210. [ 0.152831] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  211. [ 0.152844] GICv3: CPU3: using allocated LPI pending table @0x000000007e10000
  212. [ 0.152875] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  213. [ 0.187607] CPU features: detected: EL2 vector hardening
  214. [ 0.187948] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
  215. [ 0.188327] Detected PIPT I-cache on CPU4
  216. [ 0.189561] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  217. [ 0.190028] GICv3: CPU4: using allocated LPI pending table @0x000000007e11000
  218. [ 0.191262] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  219. [ 0.231299] Detected PIPT I-cache on CPU5
  220. [ 0.232494] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  221. [ 0.232918] GICv3: CPU5: using allocated LPI pending table @0x000000007e12000
  222. [ 0.234013] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  223. [ 0.239105] smp: Brought up 1 node, 6 CPUs
  224. [ 0.239497] SMP: Total of 6 processors activated.
  225. [ 0.239530] CPU features: detected: 32-bit EL0 Support
  226. [ 0.239562] CPU features: detected: CRC32 instructions
  227. [ 0.464306] CPU: All CPU(s) started at EL2
  228. [ 0.465162] alternatives: patching kernel code
  229. [ 0.470388] devtmpfs: initialized
  230. [ 0.492862] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
  231. [ 0.493100] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  232. [ 0.494779] xor: measuring software checksum speed
  233. [ 0.532324] 8regs : 1152.000 MB/sec
  234. [ 0.571911] 32regs : 52.000 MB/sec
  235. [ 0.612045] arm64_neon: 48.000 MB/sec
  236. [ 0.612724] xor: using function: 8regs (1152.000 MB/sec)
  237. [ 0.613674] pinctrl core: initialized pinctrl subsystem
  238. [ 0.674820] DMI not present or invalid.
  239. [ 0.695390] NET: Registered protocol family 16
  240. [ 0.807999] DMA: preallocated 1024 KiB pool for atomic allocations
  241. [ 0.809875] audit: initializing netlink subsys (disabled)
  242. [ 0.815431] audit: type=2000 audit(0.808:1): state=initialized audit_enabled1
  243. [ 0.880872] cpuidle: using governor menu
  244. [ 0.906472] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  245. [ 0.980478] Serial: AMBA PL011 UART driver
  246. [ 3.611293] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  247. [ 3.612391] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  248. [ 3.613199] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  249. [ 3.613960] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  250. [ 3.925178] cryptd: max_cpu_qlen set to 1000
  251. [ 4.550691] raid6: neonx8 gen() 26 MB/s
  252. [ 4.617591] raid6: neonx8 xor() 22 MB/s
  253. [ 4.685675] raid6: neonx4 gen() 23 MB/s
  254. [ 4.754598] raid6: neonx4 xor() 20 MB/s
  255. [ 4.826152] raid6: neonx2 gen() 17 MB/s
  256. [ 4.895692] raid6: neonx2 xor() 19 MB/s
  257. [ 4.963297] raid6: neonx1 gen() 340 MB/s
  258. [ 5.033011] raid6: neonx1 xor() 15 MB/s
  259. [ 5.101006] raid6: int64x8 gen() 12 MB/s
  260. [ 5.169066] raid6: int64x8 xor() 9 MB/s
  261. [ 5.241141] raid6: int64x4 gen() 12 MB/s
  262. [ 5.309776] raid6: int64x4 xor() 10 MB/s
  263. [ 5.383384] raid6: int64x2 gen() 9 MB/s
  264. [ 5.449913] raid6: int64x2 xor() 8 MB/s
  265. [ 5.522853] raid6: int64x1 gen() 6 MB/s
  266. [ 5.593309] raid6: int64x1 xor() 6 MB/s
  267. [ 5.593954] raid6: using algorithm neonx1 gen() 340 MB/s
  268. [ 5.594565] raid6: .... xor() 15 MB/s, rmw enabled
  269. [ 5.595174] raid6: using neon recovery algorithm
  270. [ 5.623919] ACPI: Interpreter disabled.
  271. [ 5.660218] iommu: Default domain type: Translated
  272. [ 5.683474] rk_iommu ff650800.iommu: IRQ index 1 not found
  273. [ 5.700960] rk_iommu ff8f3f00.iommu: IRQ index 1 not found
  274. [ 5.717310] rk_iommu ff903f00.iommu: IRQ index 1 not found
  275. [ 5.734099] rk_iommu ff914000.iommu: IRQ index 1 not found
  276. [ 5.749358] rk_iommu ff924000.iommu: IRQ index 1 not found
  277. [ 5.760303] vgaarb: loaded
  278. [ 5.775751] SCSI subsystem initialized
  279. [ 5.794557] usbcore: registered new interface driver usbfs
  280. [ 5.797129] usbcore: registered new interface driver hub
  281. [ 5.803752] usbcore: registered new device driver usb
  282. [ 5.862209] mc: Linux media interface: v0.10
  283. [ 5.864206] videodev: Linux video capture interface: v2.00
  284. [ 5.868349] pps_core: LinuxPPS API ver. 1 registered
  285. [ 5.869084] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
  286. [ 5.870932] PTP clock support registered
  287. [ 5.919922] Advanced Linux Sound Architecture Driver Initialized.
  288. [ 5.941429] Bluetooth: Core ver 2.22
  289. [ 5.944186] NET: Registered protocol family 31
  290. [ 5.944891] Bluetooth: HCI device and connection manager initialized
  291. [ 5.945789] Bluetooth: HCI socket layer initialized
  292. [ 5.946749] Bluetooth: L2CAP socket layer initialized
  293. [ 5.949137] Bluetooth: SCO socket layer initialized
  294. [ 5.950794] NetLabel: Initializing
  295. [ 5.951389] NetLabel: domain hash size = 128
  296. [ 5.951932] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  297. [ 5.955331] NetLabel: unlabeled traffic allowed by default
  298. [ 5.989531] clocksource: Switched to clocksource arch_sys_counter
  299. [ 5.999744] VFS: Disk quotas dquot_6.6.0
  300. [ 6.003746] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  301. [ 6.019932] pnp: PnP ACPI: disabled
  302. [ 6.349617] thermal_sys: Registered thermal governor 'step_wise'
  303. [ 6.349821] thermal_sys: Registered thermal governor 'power_allocator'
  304. [ 6.378397] NET: Registered protocol family 2
  305. [ 6.411564] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 163)
  306. [ 6.415594] TCP established hash table entries: 16384 (order: 5, 131072 byte)
  307. [ 6.427269] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, line)
  308. [ 6.447147] TCP: Hash tables configured (established 16384 bind 16384)
  309. [ 6.454135] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
  310. [ 6.458844] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
  311. [ 6.470530] NET: Registered protocol family 1
  312. [ 6.486089] RPC: Registered named UNIX socket transport module.
  313. [ 6.486937] RPC: Registered udp transport module.
  314. [ 6.487560] RPC: Registered tcp transport module.
  315. [ 6.488162] RPC: Registered tcp NFSv4.1 backchannel transport module.
  316. [ 6.508191] PCI: CLS 0 bytes, default 64
  317. [ 6.517751] Trying to unpack rootfs image as initramfs...
  318. [ 22.690707] Freeing initrd memory: 4440K
  319. [ 22.742504] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
  320. [ 22.759633] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counte
  321. [ 22.779685] kvm [1]: IPA Size Limit: 40bits
  322. [ 22.832669] kvm [1]: vgic-v2@fff20000
  323. [ 22.835122] kvm [1]: GIC system register CPU interface enabled
  324. [ 22.843587] kvm [1]: vgic interrupt IRQ10
  325. [ 22.854268] kvm [1]: Hyp mode initialized successfully
  326. [ 33.851592] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  327. [ 34.275774] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  328. [ 34.313701] NFS: Registering the id_resolver key type
  329. [ 34.315116] Key type id_resolver registered
  330. [ 34.315767] Key type id_legacy registered
  331. [ 34.316753] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  332. [ 34.318025] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  333. [ 34.374490] fuse: init (API version 7.31)
  334. [ 34.401804] 9p: Installing v9fs 9p2000 file system support
  335. [ 36.139067] NET: Registered protocol family 38
  336. [ 36.140297] Key type asymmetric registered
  337. [ 36.140982] Asymmetric key parser 'x509' registered
  338. [ 36.143986] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
  339. [ 36.151302] io scheduler mq-deadline registered
  340. [ 36.152106] io scheduler kyber registered
  341. [ 37.807504] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-0
  342. [ 37.808878] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Cha2
  343. [ 37.880748] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-0
  344. [ 37.882652] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Ch6
  345. [ 38.384818] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  346. [ 38.479133] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud =A
  347. [ 38.513903] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud =A
  348. [ 38.835455] printk: console [ttyS2] enabled
  349. [ 38.916019] SuperH (H)SCI(F) driver initialized
  350. [ 38.962821] msm_serial: driver initialized
  351. [ 39.696938] cacheinfo: Unable to detect cache hierarchy for CPU 0
  352. [ 40.142551] brd: module loaded
  353. [ 40.603190] loop: module loaded
  354. [ 41.930887] spi-nor spi0.0: gd25q128 (16384 Kbytes)
  355. [ 42.399983] rockchip-spi ff1d0000.spi: chipselect 0 already in use
  356. [ 42.402725] spi_master spi0: spi_device register error /spi@ff1d0000/spi-fla0
  357. [ 42.404945] spi_master spi0: Failed to create SPI device for /spi@ff1d0000/s0
  358. [ 42.528918] libphy: Fixed MDIO Bus: probed
  359. [ 42.574109] tun: Universal TUN/TAP device driver, 1.6
  360. [ 42.677002] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  361. [ 42.679142] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  362. [ 42.683076] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
  363. [ 42.684838] igb: Copyright (c) 2007-2014 Intel Corporation.
  364. [ 42.688880] igbvf: Intel(R) Gigabit Virtual Function Network Driver - versiok
  365. [ 42.691445] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  366. [ 42.727820] sky2: driver version 1.30
  367. [ 42.843387] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
  368. [ 42.846066] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
  369. [ 42.852104] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  370. [ 42.854943] rk_gmac-dwmac fe300000.ethernet: no regulator found
  371. [ 42.856721] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  372. [ 42.859190] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  373. [ 42.860856] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  374. [ 42.863409] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  375. [ 42.868241] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  376. [ 42.870649] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  377. [ 42.877634] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  378. [ 42.884817] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
  379. [ 42.889963] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
  380. [ 42.891652] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register suppd
  381. [ 42.894180] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine suppd
  382. [ 42.896174] rk_gmac-dwmac fe300000.ethernet: COE Type 2
  383. [ 42.898160] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
  384. [ 42.899982] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
  385. [ 42.903305] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
  386. [ 42.904957] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
  387. [ 42.907099] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watr
  388. [ 43.806843] libphy: stmmac: probed
  389. [ 43.808605] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8)
  390. [ 43.814495] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8)
  391. [ 43.936245] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet drr
  392. [ 43.942111] usbcore: registered new interface driver pegasus
  393. [ 43.945889] usbcore: registered new interface driver rtl8150
  394. [ 43.949695] usbcore: registered new interface driver r8152
  395. [ 43.953776] usbcore: registered new interface driver asix
  396. [ 43.956929] usbcore: registered new interface driver ax88179_178a
  397. [ 43.960944] usbcore: registered new interface driver cdc_ether
  398. [ 43.964786] usbcore: registered new interface driver dm9601
  399. [ 43.968493] usbcore: registered new interface driver CoreChips
  400. [ 43.972885] usbcore: registered new interface driver smsc75xx
  401. [ 43.976901] usbcore: registered new interface driver smsc95xx
  402. [ 43.980616] usbcore: registered new interface driver net1080
  403. [ 43.984275] usbcore: registered new interface driver plusb
  404. [ 43.988217] usbcore: registered new interface driver cdc_subset
  405. [ 43.992125] usbcore: registered new interface driver MOSCHIP usb-ethernet drr
  406. [ 43.996670] usbcore: registered new interface driver cdc_ncm
  407. [ 44.004627] VFIO - User Level meta-driver version: 0.3
  408. [ 44.130823] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/t
  409. [ 44.133846] dwc3 fe800000.dwc3: IRQ otg not found
  410. [ 44.135415] dwc3 fe800000.dwc3: IRQ dwc_usb3 not found
  411. [ 44.145056] dwc3 fe800000.dwc3: IRQ host not found
  412. [ 44.147513] dwc3 fe800000.dwc3: IRQ dwc_usb3 not found
  413. [ 44.227206] dwc3 fe900000.dwc3: IRQ host not found
  414. [ 44.229658] dwc3 fe900000.dwc3: IRQ dwc_usb3 not found
  415. [ 44.332845] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  416. [ 44.335310] ehci-pci: EHCI PCI platform driver
  417. [ 44.339592] ehci-platform: EHCI generic platform driver
  418. [ 44.354675] ehci-platform fe380000.usb: EHCI Host Controller
  419. [ 44.358190] ehci-platform fe380000.usb: new USB bus registered, assigned bus1
  420. [ 44.364756] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
  421. [ 44.382784] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  422. [ 44.415761] hub 1-0:1.0: USB hub found
  423. [ 44.419149] hub 1-0:1.0: 1 port detected
  424. [ 44.450558] ehci-platform fe3c0000.usb: EHCI Host Controller
  425. [ 44.453026] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus2
  426. [ 44.460588] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
  427. [ 44.478668] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  428. [ 44.508566] hub 2-0:1.0: USB hub found
  429. [ 44.511868] hub 2-0:1.0: 1 port detected
  430. [ 44.548342] ehci-orion: EHCI orion driver
  431. [ 44.562135] ehci-exynos: EHCI EXYNOS driver
  432. [ 44.573787] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  433. [ 44.576055] ohci-pci: OHCI PCI platform driver
  434. [ 44.580452] ohci-platform: OHCI generic platform driver
  435. [ 44.591987] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  436. [ 44.595119] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus3
  437. [ 44.602371] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
  438. [ 44.695173] hub 3-0:1.0: USB hub found
  439. [ 44.698649] hub 3-0:1.0: 1 port detected
  440. [ 44.724520] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  441. [ 44.727626] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus4
  442. [ 44.735064] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
  443. [ 44.838546] hub 4-0:1.0: USB hub found
  444. [ 44.841971] hub 4-0:1.0: 1 port detected
  445. [ 44.870616] ohci-exynos: OHCI EXYNOS driver
  446. [ 44.914829] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  447. [ 44.917760] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n5
  448. [ 44.926012] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110
  449. [ 44.929080] xhci-hcd xhci-hcd.0.auto: irq 228, io mem 0xfe800000
  450. [ 44.976474] hub 5-0:1.0: USB hub found
  451. [ 44.980073] hub 5-0:1.0: 1 port detected
  452. [ 44.998615] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  453. [ 45.000685] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus n6
  454. [ 45.003683] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  455. [ 45.008566] usb usb6: We don't know the algorithms for LPM for this host, di.
  456. [ 45.040376] hub 6-0:1.0: USB hub found
  457. [ 45.043623] hub 6-0:1.0: 1 port detected
  458. [ 45.069915] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  459. [ 45.072179] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n7
  460. [ 45.079835] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110
  461. [ 45.084463] xhci-hcd xhci-hcd.1.auto: irq 229, io mem 0xfe900000
  462. [ 45.131489] hub 7-0:1.0: USB hub found
  463. [ 45.134841] hub 7-0:1.0: 1 port detected
  464. [ 45.152982] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  465. [ 45.155695] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus n8
  466. [ 45.158606] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  467. [ 45.163606] usb usb8: We don't know the algorithms for LPM for this host, di.
  468. [ 45.195957] hub 8-0:1.0: USB hub found
  469. [ 45.199230] hub 8-0:1.0: 1 port detected
  470. [ 45.242336] usbcore: registered new interface driver usb-storage
  471. [ 45.556189] i2c /dev entries driver
  472. [ 45.743623] rk808 0-001b: chip id: 0x0
  473. [ 45.908414] rk808-rtc rk808-rtc: registered as rtc0
  474. [ 46.145913] rockchip-rga ff680000.rga: HW Version: 0x03.02
  475. [ 46.159949] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
  476. [ 46.478747] Bluetooth: HCI UART driver ver 2.3
  477. [ 46.566143] sdhci: Secure Digital Host Controller Interface driver
  478. [ 46.567892] sdhci: Copyright(c) Pierre Ossman
  479. [ 46.592013] Synopsys Designware Multimedia Card Interface Driver
  480. [ 46.657676] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mod.
  481. [ 46.660399] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
  482. [ 46.662890] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
  483. [ 46.666990] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 28,32 bio
  484. [ 46.674347] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
  485. [ 46.676140] mmc_host mmc0: card is non-removable.
  486. [ 46.706156] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
  487. [ 46.752653] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mod.
  488. [ 46.756019] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  489. [ 46.758542] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  490. [ 46.762896] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 29,32 bio
  491. [ 46.768725] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
  492. [ 46.788667] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
  493. [ 46.796868] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  494. [ 46.799222] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz,)
  495. [ 46.807039] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  496. [ 46.817950] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
  497. [ 46.882497] random: fast init done
  498. [ 46.908877] sdhci-pltfm: SDHCI platform and OF driver helper
  499. [ 46.919669] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000)
  500. [ 47.020926] mmc2: CQHCI version 5.10
  501. [ 47.033205] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 5000000)
  502. [ 47.073110] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using A
  503. [ 47.260620] ledtrig-cpu: registered to indicate activity on CPUs
  504. [ 47.358162] usbcore: registered new interface driver usbhid
  505. [ 47.359830] usbhid: USB HID core driver
  506. [ 47.436229] xt_time: kernel timezone is -0000
  507. [ 47.437584] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
  508. [ 47.438258] IPVS: Connection hash table configured (size=4096, memory=64Kbyt)
  509. [ 47.439948] IPVS: ipvs loaded.
  510. [ 47.440242] IPVS: [rr] scheduler registered.
  511. [ 47.440633] IPVS: [wrr] scheduler registered.
  512. [ 47.441097] IPVS: [lc] scheduler registered.
  513. [ 47.441489] IPVS: [wlc] scheduler registered.
  514. [ 47.441885] IPVS: [fo] scheduler registered.
  515. [ 47.442274] IPVS: [ovf] scheduler registered.
  516. [ 47.442683] IPVS: [lblc] scheduler registered.
  517. [ 47.443099] IPVS: [lblcr] scheduler registered.
  518. [ 47.443512] IPVS: [dh] scheduler registered.
  519. [ 47.443903] IPVS: [sh] scheduler registered.
  520. [ 47.444297] IPVS: [sed] scheduler registered.
  521. [ 47.444694] IPVS: [nq] scheduler registered.
  522. [ 47.446158] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  523. [ 47.446914] Initializing XFRM netlink socket
  524. [ 47.448278] NET: Registered protocol family 10
  525. [ 47.451718] Segment Routing with IPv6
  526. [ 47.452871] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  527. [ 47.454818] NET: Registered protocol family 17
  528. [ 47.455296] bridge: filtering via arp/ip/ip6tables is no longer available by.
  529. [ 47.456765] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  530. [ 47.457363] Bluetooth: HIDP socket layer initialized
  531. [ 47.457890] 8021q: 802.1Q VLAN Support v1.8
  532. [ 47.458469] 9pnet: Installing 9P2000 support
  533. [ 47.459168] Key type dns_resolver registered
  534. [ 47.460637] dwmmc_rockchip fe310000.dwmmc: All phases work, using default ph.
  535. [ 47.462560] registered taskstats version 1
  536. [ 47.466932] Btrfs loaded, crc32c=crc32c-generic
  537. [ 47.542870] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  538. [ 47.558326] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:57:16)
  539. [ 47.559470] of_cfs_init
  540. [ 47.560370] of_cfs_init: OK
  541. [ 47.562571] platform regulatory.0: Direct firmware load for regulatory.db fa2
  542. [ 47.563406] cfg80211: failed to load regulatory.db
  543. [ 47.563775] ALSA device list:
  544. [ 47.564371] No soundcards found.
  545. [ 47.566371] ttyS2 - failed to request DMA
  546. [ 47.569631] Freeing unused kernel memory: 1408K
  547. [ 47.593734] Run /init as init process
  548. [ 47.625932] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 255
  549. Loading, please wait...
  550. [ 47.628725] mmc1: new ultra high speed SDR104 SDHC card at address 0001
  551. [ 47.634035] mmc0: new ultra high speed SDR104 SDIO card at address 0001
  552. [ 47.654145] tmpfs: Unknown parameter 'size'
  553. mount: Invalid argument
  554. [ 47.666955] mmcblk1: mmc1:0001 EB1QT 29.8 GiB
  555. [ 47.780447] mmcblk1: p1 p2 p3 p4 p5 p6 p7
  556. Starting version 241
  557. Begin: Loading essential drivers ... done.
  558. Begin: Running /scripts/init-premount ... done.
  559. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  560. Begin: Running /scripts/local-premount ... done.
  561. Warning: fsck not present, so skipping root file system
  562. [ 85.716492] EXT4-fs (mmcblk1p7): mounted filesystem with writeback data mode)
  563. done.
  564. Begin: Running /scripts/local-bottom ... done.
  565. Begin: Running /scripts/init-bottom ... done.
  566. mount: Invalid argument
  567. [ 88.667683] random: crng init done
  568. [ 93.540340] systemd[1]: System time before build time, advancing clock.
  569. [ 93.627361] tmpfs: Unknown parameter 'mode'
  570. [ 93.630913] systemd[1]: Failed to mount tmpfs at /dev/shm: Invalid argument
  571. [ 93.654613] tmpfs: Unknown parameter 'mode'
  572. [ 93.657013] systemd[1]: Failed to mount tmpfs at /run: Invalid argument
  573. [ 93.682554] tmpfs: Unknown parameter 'mode'
  574. [ 93.686129] systemd[1]: Failed to mount tmpfs at /run/lock: Invalid argument
  575. [ 93.722560] tmpfs: Unknown parameter 'mode'
  576. [ 93.725005] systemd[1]: Failed to mount tmpfs at /sys/fs/cgroup: Invalid argt
  577. [ 93.776292] systemd[1]: Failed to mount cgroup at /sys/fs/cgroup/systemd: Noy
  578. [!!!!!!] Failed to mount API filesystems.
  579. [ 93.862654] systemd[1]: Freezing execution.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement