Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-36-generic] (local build)
- Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Hitachi/HGST Travelstar 5K750
- Device Model: Hitachi HTS547550A9E384
- Serial Number: J2110051DUWA1B
- LU WWN Device Id: 5 000cca 63cd9db5a
- Firmware Version: JE3OA50A
- User Capacity: 500.107.862.016 bytes [500 GB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Form Factor: 2.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 6
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Sat Sep 10 14:07:41 2016 BRT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART Status not supported: Incomplete response, ATA output registers missing
- SMART overall-health self-assessment test result: PASSED
- Warning: This result is based on an Attribute check.
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 45) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 128) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
- 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
- 3 Spin_Up_Time 0x0007 162 162 033 Pre-fail Always - 2
- 4 Start_Stop_Count 0x0012 097 097 000 Old_age Always - 5330
- 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
- 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
- 9 Power_On_Hours 0x0012 052 052 000 Old_age Always - 21271
- 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
- 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 4597
- 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0032 097 097 000 Old_age Always - 710
- 193 Load_Cycle_Count 0x0012 056 056 000 Old_age Always - 440640
- 194 Temperature_Celsius 0x0002 187 187 000 Old_age Always - 32 (Min/Max 15/66)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 22
- 223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 56757 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 56757 occurred at disk power-on lifetime: 12649 hours (527 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 00 e8 3d dc 09 Error: ICRC, ABRT at LBA = 0x09dc3de8 = 165428712
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 18 a8 18 ab dd 40 00 01:12:38.907 READ FPDMA QUEUED
- 60 50 a0 b0 aa dd 40 00 01:12:38.907 READ FPDMA QUEUED
- 60 08 98 60 aa dd 40 00 01:12:38.907 READ FPDMA QUEUED
- 60 20 90 38 aa dd 40 00 01:12:38.907 READ FPDMA QUEUED
- 60 08 88 d8 7a 61 40 00 01:12:38.893 READ FPDMA QUEUED
- Error 56756 occurred at disk power-on lifetime: 12649 hours (527 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 10 d8 3e dc 09 Error: ICRC, ABRT at LBA = 0x09dc3ed8 = 165428952
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 60 18 a8 18 ab dd 40 00 01:12:38.907 READ FPDMA QUEUED
- 60 50 a0 b0 aa dd 40 00 01:12:38.907 READ FPDMA QUEUED
- 60 08 98 60 aa dd 40 00 01:12:38.907 READ FPDMA QUEUED
- 60 20 90 38 aa dd 40 00 01:12:38.907 READ FPDMA QUEUED
- 60 08 88 d8 7a 61 40 00 01:12:38.893 READ FPDMA QUEUED
- Error 56755 occurred at disk power-on lifetime: 12649 hours (527 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 00 78 09 26 0c Error: ICRC, ABRT at LBA = 0x0c260978 = 203819384
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 b0 48 5b 26 40 00 01:12:21.886 WRITE FPDMA QUEUED
- 61 08 a8 30 5b 26 40 00 01:12:21.886 WRITE FPDMA QUEUED
- 61 08 a0 b0 5a 26 40 00 01:12:21.885 WRITE FPDMA QUEUED
- 61 10 98 00 52 26 40 00 01:12:21.885 WRITE FPDMA QUEUED
- 61 10 90 d0 49 26 40 00 01:12:21.885 WRITE FPDMA QUEUED
- Error 56754 occurred at disk power-on lifetime: 12649 hours (527 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 f0 88 0a 26 0c Error: ICRC, ABRT at LBA = 0x0c260a88 = 203819656
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 08 b0 48 5b 26 40 00 01:12:21.886 WRITE FPDMA QUEUED
- 61 08 a8 30 5b 26 40 00 01:12:21.886 WRITE FPDMA QUEUED
- 61 08 a0 b0 5a 26 40 00 01:12:21.885 WRITE FPDMA QUEUED
- 61 10 98 00 52 26 40 00 01:12:21.885 WRITE FPDMA QUEUED
- 61 10 90 d0 49 26 40 00 01:12:21.885 WRITE FPDMA QUEUED
- Error 56753 occurred at disk power-on lifetime: 12649 hours (527 days + 1 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 84 51 e0 a0 bb 26 04 Error: ICRC, ABRT at LBA = 0x0426bba0 = 69647264
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- 61 f0 20 f0 76 26 40 00 01:03:19.445 WRITE FPDMA QUEUED
- 61 00 18 00 90 26 40 00 01:03:19.445 WRITE FPDMA QUEUED
- 61 00 10 00 94 26 40 00 01:03:19.445 WRITE FPDMA QUEUED
- 61 00 08 00 98 26 40 00 01:03:19.445 WRITE FPDMA QUEUED
- 61 f0 00 00 9c 26 40 00 01:03:19.445 WRITE FPDMA QUEUED
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement