API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 10th, 2018
652
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.87 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 3.10.105 (root@build4) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #23739 SMP Tue Jul 3 19:48:37 CST 2018
  6. [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000] Machine: Marvell Armada 380/381/382/383/384/385/388 (Device Tree), model: Synology DS218j
  9. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  10. [ 0.000000] On node 0 totalpages: 131072
  11. [ 0.000000] free_area_init_node: node 0, pgdat 80667d00, node_mem_map 806cf000
  12. [ 0.000000] Normal zone: 1024 pages used for memmap
  13. [ 0.000000] Normal zone: 0 pages reserved
  14. [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
  15. [ 0.000000] PERCPU: Embedded 7 pages/cpu @80ad9000 s7168 r8192 d13312 u32768
  16. [ 0.000000] pcpu-alloc: s7168 r8192 d13312 u32768 alloc=8*4096
  17. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  18. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  19. [ 0.000000] Kernel command line: console=ttyS0,115200 ip=off initrd=0x3000000 root=/dev/md0 rw syno_hw_version=DS218j syno_hdd_powerup_seq=2 ihd_num=2 netif_num=1 syno_hdd_enable=15,16 flash_size=8
  20. [ 0.000000] Synology Hardware Version: DS218j-j
  21. [ 0.000000] Power on seq num: 2
  22. [ 0.000000] Internal HD num: 2
  23. [ 0.000000] Internal netif num: 1
  24. [ 0.000000] SYNO GPIO hdd enable pin: 15 16
  25. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  26. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  27. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  28. [ 0.000000] allocated 1048576 bytes of page_cgroup
  29. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  30. [ 0.000000] Memory: 512MB = 512MB total
  31. [ 0.000000] Memory: 508104k/508104k available, 16184k reserved, 0K highmem
  32. [ 0.000000] Virtual kernel memory layout:
  33. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  34. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  35. vmalloc : 0xa0800000 - 0xfff00000 (1527 MB)
  36. lowmem : 0x80000000 - 0xa0000000 ( 512 MB)
  37. modules : 0x7f000000 - 0x80000000 ( 16 MB)
  38. .text : 0x80008000 - 0x805f6058 (6073 kB)
  39. .init : 0x805f7000 - 0x80630c00 ( 231 kB)
  40. .data : 0x80632000 - 0x80668640 ( 218 kB)
  41. .bss : 0x80668640 - 0x806ce884 ( 409 kB)
  42. [ 0.000000] Hierarchical RCU implementation.
  43. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  44. [ 0.000000]
  45. LSP version: linux-3.10.70-2015_T1.1p7
  46.  
  47. [ 0.000000] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 171798ms
  48. [ 0.000000] L310 cache controller enabled
  49. [ 0.000000] l2x0: 16 ways, CACHE_ID 0x410054c9, AUX_CTRL 0x16070000, Cache size: 1048576 B
  50. [ 0.000459] Calibrating delay loop... 2655.84 BogoMIPS (lpj=13279232)
  51. [ 0.060029] pid_max: default: 32768 minimum: 301
  52. [ 0.060081] Security Framework initialized
  53. [ 0.060092] AppArmor: AppArmor initialized
  54. [ 0.060112] Mount-cache hash table entries: 512
  55. [ 0.060475] Initializing cgroup subsys memory
  56. [ 0.060493] Disabling memory control group subsystem
  57. [ 0.060496] Initializing cgroup subsys devices
  58. [ 0.060500] Initializing cgroup subsys freezer
  59. [ 0.060504] Initializing cgroup subsys blkio
  60. [ 0.060529] CPU: Testing write buffer coherency: ok
  61. [ 0.060655] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  62. [ 0.060691] Setting up static identity map for 0x80479080 - 0x804790d8
  63. [ 0.060833] mvebu-pmsu: Initializing Power Management Service Unit
  64. [ 0.060868] Initializing CPU Reset module
  65. [ 0.061543] CPU1: Booted secondary processor
  66. [ 0.120626] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  67. [ 0.120688] Brought up 2 CPUs
  68. [ 0.120697] SMP: Total of 2 processors activated (5311.69 BogoMIPS).
  69. [ 0.120700] CPU: All CPU(s) started in SVC mode.
  70. [ 0.121007] devtmpfs: initialized
  71. [ 0.123434] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
  72. [ 0.123631] xor: measuring software checksum speed
  73. [ 0.220507] arm4regs : 2365.600 MB/sec
  74. [ 0.320408] 8regs : 1630.400 MB/sec
  75. [ 0.420307] 32regs : 1658.800 MB/sec
  76. [ 0.420311] xor: using function: arm4regs (2365.600 MB/sec)
  77. [ 0.420316] pinctrl core: initialized pinctrl subsystem
  78. [ 0.420611] regulator-dummy: no parameters
  79. [ 0.420770] NET: Registered protocol family 16
  80. [ 0.421372] DMA: preallocated 256 KiB pool for atomic coherent allocations
  81. [ 0.423528] irq: Cannot allocate irq_descs @ IRQ194, assuming pre-allocated
  82. [ 0.423889] irq: Cannot allocate irq_descs @ IRQ226, assuming pre-allocated
  83. [ 0.426729] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  84. [ 0.426735] hw-breakpoint: maximum watchpoint size is 4 bytes.
  85. [ 0.434407] bio: create slab <bio-0> at 0
  86. [ 0.600409] raid6: int32x1 gen() 199 MB/s
  87. [ 0.770106] raid6: int32x1 xor() 162 MB/s
  88. [ 0.939798] raid6: int32x2 gen() 274 MB/s
  89. [ 1.109768] raid6: int32x2 xor() 185 MB/s
  90. [ 1.279468] raid6: int32x4 gen() 274 MB/s
  91. [ 1.449337] raid6: int32x4 xor() 197 MB/s
  92. [ 1.619160] raid6: int32x8 gen() 303 MB/s
  93. [ 1.789081] raid6: int32x8 xor() 193 MB/s
  94. [ 1.789085] raid6: using algorithm int32x8 gen() (303 MB/s)
  95. [ 1.789088] raid6: .... xor() 193 MB/s, rmw enabled
  96. [ 1.789091] raid6: using intx1 recovery algorithm
  97. [ 1.789285] mvebu-pcie pcie-controller.3: PCIe0.0: link down
  98. [ 1.789307] mvebu-pcie pcie-controller.3: PCIe1.0: link down
  99. [ 1.789437] mvebu-pcie pcie-controller.3: PCI host bridge to bus 0000:00
  100. [ 1.789446] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
  101. [ 1.789452] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
  102. [ 1.789458] pci_bus 0000:00: root bus resource [bus 00-ff]
  103. [ 1.789477] pci 0000:00:01.0: [11ab:7846] type 01 class 0x060400
  104. [ 1.789607] pci 0000:00:02.0: [11ab:7846] type 01 class 0x060400
  105. [ 1.789716] PCI: bus0: Fast back to back transfers disabled
  106. [ 1.789724] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  107. [ 1.789731] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  108. [ 1.789821] PCI: bus1: Fast back to back transfers enabled
  109. [ 1.789829] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  110. [ 1.789915] PCI: bus2: Fast back to back transfers enabled
  111. [ 1.789922] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
  112. [ 1.789945] pci 0000:00:01.0: PCI bridge to [bus 01]
  113. [ 1.789953] pci 0000:00:02.0: PCI bridge to [bus 02]
  114. [ 1.789962] PCI: enabling device 0000:00:01.0 (0140 -> 0143)
  115. [ 1.789968] PCI: enabling device 0000:00:02.0 (0140 -> 0143)
  116. [ 1.790509] SCSI subsystem initialized
  117. [ 1.790706] libata version 3.00 loaded.
  118. [ 1.791654] Switching to clocksource armada_370_xp_clocksource
  119. [ 1.791857] AppArmor: AppArmor Filesystem Enabled
  120. [ 1.793002] NET: Registered protocol family 2
  121. [ 1.793369] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  122. [ 1.793413] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  123. [ 1.793451] TCP: Hash tables configured (established 4096 bind 4096)
  124. [ 1.793478] TCP: reno registered
  125. [ 1.793485] UDP hash table entries: 256 (order: 1, 8192 bytes)
  126. [ 1.793498] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  127. [ 1.793593] NET: Registered protocol family 1
  128. [ 1.793743] RPC: Registered named UNIX socket transport module.
  129. [ 1.793749] RPC: Registered udp transport module.
  130. [ 1.793752] RPC: Registered tcp transport module.
  131. [ 1.793756] RPC: Registered tcp NFSv4.1 backchannel transport module.
  132. [ 1.793769] PCI: CLS 64 bytes, default 64
  133. [ 1.793861] Trying to unpack rootfs image as initramfs...
  134. [ 3.046167] Freeing initrd memory: 3544K (9f6b0000 - 9fa26000)
  135. [ 3.046408] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  136. [ 3.048082] Initialise module verification
  137. [ 3.048123] audit: initializing netlink socket (disabled)
  138. [ 3.048155] type=2000 audit(3.040:1): initialized
  139. [ 3.049482] VFS: Disk quotas dquot_6.5.2
  140. [ 3.049542] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  141. [ 3.049853] NFS: Registering the id_resolver key type
  142. [ 3.049872] Key type id_resolver registered
  143. [ 3.049876] Key type id_legacy registered
  144. [ 3.049898] msgmni has been set to 999
  145. [ 3.050499] async_tx: api initialized (async)
  146. [ 3.050506] Key type asymmetric registered
  147. [ 3.050510] Asymmetric key parser 'x509' registered
  148. [ 3.050718] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
  149. [ 3.050725] io scheduler noop registered
  150. [ 3.050739] io scheduler cfq registered (default)
  151. [ 3.051656] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
  152. [ 3.052270] mv_xor f1060800.xor: Marvell shared XOR driver
  153. [ 3.092004] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
  154. [ 3.122022] mv_xor f1060800.xor: freeing 1 in use descriptors!
  155. [ 3.122034] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( intr crc32c )
  156. [ 3.123229] mv_xor f1060900.xor: Marvell shared XOR driver
  157. [ 3.161995] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr pq )
  158. [ 3.192021] mv_xor f1060900.xor: freeing 1 in use descriptors!
  159. [ 3.192033] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( intr crc32c )
  160. [ 3.193760] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  161. [ 3.215831] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 44) is a 16550A
  162. [ 4.028700] console [ttyS0] enabled
  163. [ 4.052726] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 45) is a 16550A
  164. [ 4.070074] brd: module loaded
  165. [ 4.073163] Loading iSCSI transport class v2.0-870.
  166. [ 4.080755] ahci_mv f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  167. [ 4.089611] ahci_mv f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  168. [ 4.100142] scsi0 : ahci_mv_platform
  169. [ 4.104453] scsi1 : ahci_mv_platform
  170. [ 4.108548] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 58
  171. [ 4.116519] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 58
  172. [ 12.411686] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  173. [ 12.439650] ata1.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
  174. [ 12.445864] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  175. [ 12.453516] ata1.00: configured for UDMA/133
  176. [ 12.458453] scsi 0:0:0:0: Direct-Access ATA ST2000VN004-2E4164 SC60 PQ: 0 ANSI: 5
  177. [ 12.468208] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
  178. [ 12.476002] sd 0:0:0:0: [sda] 4096-byte physical blocks
  179. [ 12.481558] Delay 5 seconds to wait for disk 2 ready.
  180. [ 12.481640] sd 0:0:0:0: [sda] Write Protect is off
  181. [ 12.481644] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  182. [ 12.481698] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  183. [ 12.506970] sda: sda1 sda2 sda3 < sda5 >
  184. [ 12.513238] sd 0:0:0:0: [sda] Attached SCSI disk
  185. [ 25.711686] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  186. [ 25.726993] ata2.00: ATA-9: ST2000VN004-2E4164, SC60, max UDMA/133
  187. [ 25.733207] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  188. [ 25.740864] ata2.00: configured for UDMA/133
  189. [ 25.745767] scsi 1:0:0:0: Direct-Access ATA ST2000VN004-2E4164 SC60 PQ: 0 ANSI: 5
  190. [ 25.755503] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
  191. [ 25.763296] sd 1:0:0:0: [sdb] 4096-byte physical blocks
  192. [ 25.768926] sd 1:0:0:0: [sdb] Write Protect is off
  193. [ 25.773760] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  194. [ 25.773840] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  195. [ 25.774087] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
  196. [ 25.774105] Searching for RedBoot partition table in spi0.0 at offset 0x7f0000
  197. [ 25.820090] sdb: sdb1 sdb2 sdb3 < sdb5 >
  198. [ 25.826389] sd 1:0:0:0: [sdb] Attached SCSI disk
  199. [ 25.874341] 6 RedBoot partitions found on MTD device spi0.0
  200. [ 25.879937] Creating 6 MTD partitions on "spi0.0":
  201. [ 25.884768] 0x000000000000-0x0000000f0000 : "RedBoot"
  202. [ 25.891036] 0x0000000f0000-0x0000003c0000 : "zImage"
  203. [ 25.897219] 0x0000003c0000-0x0000007d0000 : "rd.gz"
  204. [ 25.903261] 0x0000007d0000-0x0000007e0000 : "vendor"
  205. [ 25.908703] vender Mac0 address : 00:11:32:83:c3:5c
  206. [ 25.913616] vender Mac1 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
  207. [ 25.919473] vender Mac2 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
  208. [ 25.925369] vender Mac3 doesn't set ucSum:0x00 Buf:0x00 Sum:0.
  209. [ 25.931228] serial number='17B0Q2N410616'
  210. [ 25.936172] 0x0000007e0000-0x0000007f0000 : "RedBoot Config"
  211. [ 25.943215] 0x0000007f0000-0x000000800000 : "FIS directory"
  212. [ 25.953316] SoC: model = 0x6820, revision = 0x4
  213. [ 25.957931] mvPncVirtBase = 0xa0c00000, pncTcamSize = 1024
  214. [ 25.963453] o 3 Giga ports supported
  215. [ 25.967217] o SKB recycle supported for SWF (Disabled)
  216. [ 25.972569] o NETA acceleration mode 4
  217. [ 25.976506] o BM supported for CPU: 4 BM pools
  218. [ 25.981140] o PnC supported (Enabled)
  219. [ 25.984994] o RX Queue support: 8 Queues * 512 Descriptors
  220. [ 25.990674] o TX Queue support: 8 Queues * 1024 Descriptors
  221. [ 25.996445] o GSO supported
  222. [ 25.999422] o GRO supported
  223. [ 26.002401] o Receive checksum offload supported
  224. [ 26.007209] o Transmit checksum offload supported
  225. [ 26.012111] o Driver ERROR statistics enabled
  226. [ 26.016658] o Driver INFO statistics enabled
  227. [ 26.021117] o Driver DEBUG statistics enabled
  228.  
  229. [ 26.028219] port #0: is_sgmii=1, is_rgmii=0, phy_addr=1
  230. [ 26.033506] o Loading network interface(s) for port #0: cpu_mask=0x3, tx_csum_limit=9800
  231.  
  232. [ 26.043326] o Port 0 is connected to Linux netdevice
  233. [ 26.053099] o eth0, ifindex = 2, GbE port = 0
  234. [ 26.057838] o eth0, phy chipid = 1410dd0, Support WOL = 32
  235. [ 26.067125] giga p=0: mtu=1500, mac=00:50:43:02:02:01 (platform)
  236.  
  237. [ 26.075304] libphy: orion_mdio_bus: probed
  238. [ 26.081591] mdio_bus f1072004.mdio-mi: cannot get PHY at address 0
  239. [ 26.089197] mvebu-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
  240. [ 26.141861] i2c /dev entries driver
  241. [ 26.157209] armada_thermal f10e4078.thermal: Overheat threshold between 92..107
  242. [ 26.165194] md: linear personality registered for level -1
  243. [ 26.170706] md: raid0 personality registered for level 0
  244. [ 26.176054] md: raid1 personality registered for level 1
  245. [ 26.181389] md: raid10 personality registered for level 10
  246. [ 26.187140] md: raid6 personality registered for level 6
  247. [ 26.192486] md: raid5 personality registered for level 5
  248. [ 26.197820] md: raid4 personality registered for level 4
  249. [ 26.203394] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: [email protected]
  250. [ 26.211885] cpuidle: using governor ladder
  251. [ 26.216285] armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources: Total CESA HW channels supported 2
  252. [ 26.225648] armada-cesa-ocf f109d000.crypto: mv_get_cesa_resources: CESA feature: chain(0)
  253. [ 26.234266] mvCesaInit: channels=2, session=640, queue=256
  254. [ 26.253099] armada-cesa-ocf f109d000.crypto: cesa_ocf_probe: CESA driver operate in ocf(0) mode
  255. [ 26.262757] cesadev_init(80615ae0)
  256. [ 26.266965] TCP: cubic registered
  257. [ 26.270297] NET: Registered protocol family 17
  258. [ 26.274826] Key type dns_resolver registered
  259. [ 26.279186] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  260. [ 26.286918] Registering suspend init for this board failed
  261. [ 26.295302] Loading module verification blacklist certificates
  262. [ 26.301174] Loading module verification certificates
  263. [ 26.306260] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
  264. [ 26.321924] MODSIGN: Loaded cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
  265. [ 26.332361] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
  266. [ 26.344268] MODSIGN: Loaded cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
  267. [ 26.354413] registered taskstats version 1
  268. [ 26.358569] regulator-dummy: disabling
  269. [ 26.362686] Freeing unused kernel memory: 228K (805f7000 - 80630000)
  270. [ 26.517723] usbcore: registered new interface driver usbfs
  271. [ 26.526037] usbcore: registered new interface driver hub
  272. [ 26.537028] usbcore: registered new device driver usb
  273. [ 26.577581] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  274. [ 26.621883] xhci-hcd f10f0000.usb3: USB2 Vbus gpio 58
  275. [ 26.626969] xhci-hcd f10f0000.usb3: power control enabled
  276. [ 26.632428] xhci-hcd f10f0000.usb3: xHCI Host Controller
  277. [ 26.637777] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 1
  278. [ 26.645540] xhci-hcd f10f0000.usb3: irq 48, io mem 0xf10f0000
  279. [ 26.651899] xHCI xhci_add_endpoint called for root hub
  280. [ 26.651909] xHCI xhci_check_bandwidth called for root hub
  281. [ 26.654601] hub 1-0:1.0: USB hub found
  282. [ 26.658392] hub 1-0:1.0: 1 port detected
  283. [ 26.662488] xhci-hcd f10f0000.usb3: USB3 Vbus gpio 58
  284. [ 26.667570] xhci-hcd f10f0000.usb3: power control enabled
  285. [ 26.673021] xhci-hcd f10f0000.usb3: xHCI Host Controller
  286. [ 26.678373] xhci-hcd f10f0000.usb3: new USB bus registered, assigned bus number 2
  287. [ 26.686590] xHCI xhci_add_endpoint called for root hub
  288. [ 26.686601] xHCI xhci_check_bandwidth called for root hub
  289. [ 26.686895] hub 2-0:1.0: USB hub found
  290. [ 26.690695] hub 2-0:1.0: 1 port detected
  291. [ 26.694844] xhci-hcd f10f8000.usb3: USB2 Vbus gpio 59
  292. [ 26.699924] xhci-hcd f10f8000.usb3: power control enabled
  293. [ 26.705383] xhci-hcd f10f8000.usb3: xHCI Host Controller
  294. [ 26.710747] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
  295. [ 26.721569] xhci-hcd f10f8000.usb3: irq 49, io mem 0xf10f8000
  296. [ 26.727977] xHCI xhci_add_endpoint called for root hub
  297. [ 26.727987] xHCI xhci_check_bandwidth called for root hub
  298. [ 26.730887] hub 3-0:1.0: USB hub found
  299. [ 26.734768] hub 3-0:1.0: 1 port detected
  300. [ 26.738883] xhci-hcd f10f8000.usb3: USB3 Vbus gpio 59
  301. [ 26.743994] xhci-hcd f10f8000.usb3: power control enabled
  302. [ 26.749429] xhci-hcd f10f8000.usb3: xHCI Host Controller
  303. [ 26.754832] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 4
  304. [ 26.767123] xHCI xhci_add_endpoint called for root hub
  305. [ 26.767137] xHCI xhci_check_bandwidth called for root hub
  306. [ 26.770518] hub 4-0:1.0: USB hub found
  307. [ 26.774355] hub 4-0:1.0: 1 port detected
  308. [ 26.854941] ehci-orion: EHCI orion driver
  309. [ 26.859130] orion-ehci f1058000.usb: failed to get Vbus gpio
  310. [ 26.864851] orion-ehci f1058000.usb: USB2 Vbus gpio -1
  311. [ 26.870012] orion-ehci f1058000.usb: power control disabled
  312. [ 26.875614] orion-ehci f1058000.usb: EHCI Host Controller
  313. [ 26.881047] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 5
  314. [ 26.888719] orion-ehci f1058000.usb: irq 50, io mem 0xf1058000
  315. [ 26.911699] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
  316. [ 26.918598] hub 5-0:1.0: USB hub found
  317. [ 26.922422] hub 5-0:1.0: 1 port detected
  318. [ 26.983420] ds218j_synobios: module license 'Synology Inc.' taints kernel.
  319. [ 26.990618] Disabling lock debugging due to kernel taint
  320. [ 26.996799] Synobios DS218j GPIO initialized
  321. [ 27.001308] 2018-9-10 21:43:4 UTC
  322. [ 27.004684] synobios: load, major number 201
  323. [ 27.008978] Brand: Synology
  324. [ 27.011817] Model: DS-218j
  325. [ 27.014544] This is default settings: set group disks wakeup number to 1, spinup time deno 1
  326. [ 27.023041] synobios cpu_arch proc entry initialized
  327. [ 27.028026] synobios crypto_hw proc entry initialized
  328. [ 27.033104] synobios syno_platform proc entry initialized
  329. [ 27.038603] synobios open /dev/ttyS1 success
  330. [ 27.057989] synobios: unload
  331. [ 27.081878] md: Autodetecting RAID arrays.
  332. [ 27.189755] md: invalid raid superblock magic on sda5
  333. [ 27.194844] md: sda5 does not have a valid v0.90 superblock, not importing!
  334. [ 27.256731] md: invalid raid superblock magic on sdb5
  335. [ 27.261811] md: sdb5 does not have a valid v0.90 superblock, not importing!
  336. [ 27.268809] md: Scanned 6 and added 4 devices.
  337. [ 27.273276] md: autorun ...
  338. [ 27.276079] md: considering sda1 ...
  339. [ 27.279675] md: adding sda1 ...
  340. [ 27.282928] md: sda2 has different UUID to sda1
  341. [ 27.287482] md: adding sdb1 ...
  342. [ 27.290724] md: sdb2 has different UUID to sda1
  343. [ 27.295290] md: created md0
  344. [ 27.298094] md: bind<sdb1>
  345. [ 27.300841] md: bind<sda1>
  346. [ 27.303583] md: running: <sda1><sdb1>
  347. [ 27.307610] md/raid1:md0: active with 2 out of 2 mirrors
  348. [ 27.342135] md0: detected capacity change from 0 to 2549940224
  349. [ 27.348196] md: considering sda2 ...
  350. [ 27.351838] md: adding sda2 ...
  351. [ 27.355097] md: adding sdb2 ...
  352. [ 27.361355] md: created md1
  353. [ 27.364215] md: bind<sdb2>
  354. [ 27.366978] md: bind<sda2>
  355. [ 27.369750] md: running: <sda2><sdb2>
  356. [ 27.375809] md/raid1:md1: active with 2 out of 2 mirrors
  357. [ 27.391138] md1: detected capacity change from 0 to 2147418112
  358. [ 27.397348] md: ... autorun DONE.
  359. [ 27.446697] md0: unknown partition table
  360. [ 28.071704] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  361. [ 29.023627] EXT4-fs (md0): barriers disabled
  362. [ 29.047658] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
  363. [ 31.399440] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
  364. [ 32.300429] EXT4-fs (md0): re-mounted. Opts: (null)
  365. [ 36.802471] sd 0:0:0:0: Attached scsi generic sg0 type 0
  366. [ 36.807919] sd 1:0:0:0: Attached scsi generic sg1 type 0
  367. [ 37.317055] md1: unknown partition table
  368. [ 37.445119] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
  369. [ 40.030795] NET: Registered protocol family 10
  370. [ 40.111292] sit: IPv6 over IPv4 tunneling driver
  371. [ 40.772570] init: syno-auth-check main process (1673) killed by TERM signal
  372. [ 41.841981] encryptfs using the OCF package.
  373. [ 42.001857] fuse init (API version 7.22)
  374. [ 42.100779] systemd-udevd[2022]: starting version 204
  375. [ 42.165664] Loading modules backported from Linux version v3.18.1-0-g39ca484
  376. [ 42.172787] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
  377. [ 42.842551] exFAT: Version 1.2.9
  378. [ 43.949234] Synobios DS218j GPIO initialized
  379. [ 43.953774] 2018-9-10 21:43:21 UTC
  380. [ 43.957199] synobios: load, major number 201
  381. [ 43.961498] Brand: Synology
  382. [ 43.964361] Model: DS-218j
  383. [ 43.967100] This is default settings: set group disks wakeup number to 1, spinup time deno 1
  384. [ 43.975634] synobios cpu_arch proc entry initialized
  385. [ 43.980630] synobios crypto_hw proc entry initialized
  386. [ 43.985761] synobios syno_platform proc entry initialized
  387. [ 43.991280] synobios open /dev/ttyS1 success
  388. [ 45.863053] eth0: mac address changed
  389. [ 46.112984] pool #0: pkt_size=1536, buf_size=1600 - 2048 of 2048 buffers added
  390. [ 46.120484] eth0: link up
  391. [ 46.123303] eth0: started
  392. [ 46.123321] eth0:
  393. [ 46.123323] link up
  394. [ 46.123324] , full duplex
  395. [ 46.123325] , speed
  396. [ 46.123325] 1 Gbps
  397. [ 47.562123] init: dhcp-client (eth0) main process (3495) killed by TERM signal
  398. [ 48.810465] init: dhcp-client (eth0) main process (3679) killed by TERM signal
  399. [ 50.412262] md: md2 stopped.
  400. [ 50.434745] md: bind<sdb5>
  401. [ 50.451844] md: bind<sda5>
  402. [ 50.492608] md/raid1:md2: active with 2 out of 2 mirrors
  403. [ 50.509178] md2: detected capacity change from 0 to 1995451858944
  404. [ 50.554058] md2: unknown partition table
  405. [ 51.025840] bio: create slab <bio-1> at 1
  406. [ 54.239094] EXT4-fs (dm-0): barriers disabled
  407. [ 55.451213] EXT4-fs (dm-0): recovery complete
  408. [ 55.469342] EXT4-fs (dm-0): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
  409. [ 61.039210] ehci-pci: EHCI PCI platform driver
  410. [ 61.472220] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(00113283c35c).
  411. [ 61.710950] usbcore: registered new interface driver usb-storage
  412. [ 61.734339] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
  413. [ 61.882675] usbcore: registered new interface driver usblp
  414. [ 61.968380] usbcore: registered new interface driver usbhid
  415. [ 61.974014] usbhid: USB HID core driver
  416. [ 62.395064] iSCSI:target_core_device.c:617:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
  417. [ 62.407357] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
  418. [ 62.740103] iSCSI:target_core_file.c:146:fd_attach_hba RODSP plugin for fileio is enabled.
  419. [ 62.748464] iSCSI:target_core_file.c:153:fd_attach_hba ODX Token Manager is enabled.
  420. [ 62.757282] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
  421. [ 62.767498] iSCSI:target_core_ep.c:813:ep_attach_hba RODSP plugin for epio is enabled.
  422. [ 62.775509] iSCSI:target_core_ep.c:820:ep_attach_hba ODX Token Manager is enabled.
  423. [ 72.360794] ata1.00: configured for UDMA/133
  424. [ 72.365169] ata1: EH complete
  425. [ 72.823581] ata2.00: configured for UDMA/133
  426. [ 72.827892] ata2: EH complete
  427. [ 81.040498] loop: module loaded
  428. [ 86.155008] findhostd uses obsolete (PF_INET,SOCK_PACKET)
  429. [ 88.899255] eth0:
  430. [ 88.901117] link up
  431. [ 88.903264] , full duplex
  432. [ 88.904410] , speed
  433. [ 88.906613] 1 Gbps
  434. [ 107.962484] usbcore: registered new interface driver snd-usb-audio
  435. [ 108.447947] usbcore: registered new interface driver snd-usb-hiface
  436. [ 123.961326] init: synocontentextractd main process ended, respawning
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!