[   77.446664] PM: suspend entry (s2idle)
[   77.482944] Filesystems sync: 0.036 seconds
[   77.484515] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   77.488709] OOM killer disabled.
[   77.488715] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   77.490496] printk: Suspending console(s) (use no_console_suspend to debug)
[   77.858748] PM: suspend devices took 0.370 seconds
[   77.989691] [drm:analogix_dp_resume [analogix_dp]] *ERROR* failed to setup the panel
[   77.989735] PM: dpm_run_callback(): rockchip_dp_resume+0x0/0x40 [rockchipdrm] returns -16
[   77.989784] rockchip-dp ff970000.edp: PM: failed to resume early: error -16
[   77.996944] xhci-hcd xhci-hcd.0.auto: xHC error in resume, USBSTS 0x401, Reinit
[   77.996961] usb usb3: root hub lost power or was reset
[   77.996967] usb usb4: root hub lost power or was reset
[   78.048444] nvme nvme0: 6/0/0 default/read/poll queues
[   78.050677] nvme nvme0: Ignoring bogus Namespace Identifiers
[   78.079365] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work [rockchipdrm]] Not connected. Disabling cdn
[   78.328774] PM: resume devices took 0.340 seconds
[   78.328811] OOM killer enabled.
[   78.328814] Restarting tasks ... done.
[   78.334472] PM: suspend exit
[   78.412558] mmc2: mmc_select_hs200 failed, error -110
[   78.412575] mmc2: error -110 doing runtime resume
[   78.413237] mmc2: running CQE recovery
[   78.417914] mmc2: cache flush error -110
[   78.470833] mmc2: mmc_select_hs200 failed, error -110
[   78.470857] mmc2: tried to HW reset card, got error -110
[   84.559944] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

U-Boot TPL 2021.10-2 (Dec 25 2021 - 16:31:17)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2021.10-2 (Dec 25 2021 - 16:31:17 +0000)
Trying to boot from MMC1


U-Boot 2021.10-2 (Dec 25 2021 - 16:31:17 +0000) Manjaro Linux ARM

SoC: Rockchip rk3399
Reset cause: POR
Model: Pine64 Pinebook Pro
DRAM:  3.9 GiB
PMIC:  RK808
MMC:   mmc@fe310000: 3, mmc@fe320000: 1, mmc@fe330000: 0
Loading Environment from SPIFlash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   vidconsole
Err:   vidconsole
Model: Pine64 Pinebook Pro
Net:   No ethernet found.
starting USB...
Bus usb@fe3a0000: USB OHCI 1.0
Bus usb@fe3e0000: USB OHCI 1.0
scanning bus usb@fe3a0000 for devices... 2 USB Device(s) found
scanning bus usb@fe3e0000 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0

Device 0: unknown device
Card did not respond to voltage select! : -110
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
242 bytes read in 14 ms (16.6 KiB/s)
1:      Manjaro ARM
Retrieving file: /initramfs-linux.img
8579182 bytes read in 388 ms (21.1 MiB/s)
Retrieving file: /Image
30831104 bytes read in 1386 ms (21.2 MiB/s)
append: initrd=/initramfs-linux.img console=ttyS2,1500000 root=PARTUUID=82e733ee-c2a5-4164-829e-f8fdb351cce3 rw rootwait audit=0 splash plymouth.ignore-serial-consoles
Retrieving file: /dtbs/rockchip/rk3399-pinebook-pro.dtb
83695 bytes read in 38 ms (2.1 MiB/s)
Moving Image from 0x2080000 to 0x2200000, end=4040000
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f46f7000, end f4f2586e ... OK
   Loading Device Tree to 00000000f46df000, end 00000000f46f66ee ... OK

Starting kernel ...

:: running early hook [udev]
Starting version 250.5-1-arch
:: running early hook [plymouth]

U-Boot TPL 2021.10-2 (Dec 25 2021 - 16:31:17)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2021.10-2 (Dec 25 2021 - 16:31:17 +0000)
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
Trying to boot from SPI
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

U-Boot TPL 2021.10-2 (Dec 25 2021 - 16:31:17)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2021.10-2 (Dec 25 2021 - 16:31:17 +0000)
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
Trying to boot from SPI
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

U-Boot TPL 2021.10-2 (Dec 25 2021 - 16:31:17)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2021.10-2 (Dec 25 2021 - 16:31:17 +0000)
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
Trying to boot from SPI
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

U-Boot TPL 2021.10-2 (Dec 25 2021 - 16:31:17)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2021.10-2 (Dec 25 2021 - 16:31:17 +0000)
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
Trying to boot from SPI
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

U-Boot TPL 2021.10-2 (Dec 25 2021 - 16:31:17)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2021.10-2 (Dec 25 2021 - 16:31:17 +0000)
Trying to boot from MMC1


U-Boot 2021.10-2 (Dec 25 2021 - 16:31:17 +0000) Manjaro Linux ARM

SoC: Rockchip rk3399
Reset cause: POR
Model: Pine64 Pinebook Pro
DRAM:  3.9 GiB
PMIC:  RK808
MMC:   mmc@fe310000: 3, mmc@fe320000: 1, mmc@fe330000: 0
Loading Environment from SPIFlash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   vidconsole
Err:   vidconsole
Model: Pine64 Pinebook Pro
Net:   No ethernet found.
starting USB...
Bus usb@fe3a0000: USB OHCI 1.0
Bus usb@fe3e0000: USB OHCI 1.0
scanning bus usb@fe3a0000 for devices... 2 USB Device(s) found
scanning bus usb@fe3e0000 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0

Device 0: unknown device
Card did not respond to voltage select! : -110
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
242 bytes read in 14 ms (16.6 KiB/s)
1:      Manjaro ARM
Retrieving file: /initramfs-linux.img
8579182 bytes read in 735 ms (11.1 MiB/s)
Retrieving file: /Image
30831104 bytes read in 2633 ms (11.2 MiB/s)
append: initrd=/initramfs-linux.img console=ttyS2,1500000 root=PARTUUID=82e733ee-c2a5-4164-829e-f8fdb351cce3 rw rootwait audit=0 splash plymouth.ignore-serial-consoles
Retrieving file: /dtbs/rockchip/rk3399-pinebook-pro.dtb
83695 bytes read in 42 ms (1.9 MiB/s)
Moving Image from 0x2080000 to 0x2200000, end=4040000
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f46f7000, end f4f2586e ... OK
   Loading Device Tree to 00000000f46df000, end 00000000f46f66ee ... OK

Starting kernel ...

:: running early hook [udev]
Starting version 250.5-1-arch
:: running early hook [plymouth]

Manjaro Linux 5.17.5-4-MANJARO-ARM (ttyS2)
host login: