Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- LIVALL # setenv bootargs root=/dev/mmcblk1p5 noinitrd init=/sbin/init console=ttyS0,115200n8n mem=129M@0x40000000 mem=256M@0x50000000 rw video=qfb: ip=none rootfstype=ext3 rootwait
- LIVALL # bootm 40007fc0
- ## Booting kernel from Legacy Image at 40007fc0 ...
- Image Name: Linux-2.6.35.7
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 4212672 Bytes = 4 MB
- Load Address: 40008000
- Entry Point: 40008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- Initializing cgroup subsys cpu
- Linux version 2.6.35.7 (emma@emev1) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #2 SMP PREEMPT Wed Dec 28 10:26:34 CST 2011
- CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=10c57c7f
- CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- Machine: EMXX
- Memory policy: ECC disabled, Data cache writealloc
- Normal zone: 1 pages exceeds realsize 0
- Normal zone: 1 pages exceeds realsize 0
- PERCPU: Embedded 6 pages/cpu @c05d6000 s3872 r8192 d12512 u65536
- pcpu-alloc: s3872 r8192 d12512 u65536 alloc=16*4096
- pcpu-alloc: [0] 0 [0] 1
- Built 2 zonelists in Zone order, mobility grouping on. Total pages: 97790
- Kernel command line: root=/dev/mmcblk1p5 noinitrd init=/sbin/init console=ttyS0,115200n8n mem=129M@0x40000000 mem=256M@0x50000000 rw video=qfb: ip=none rootfstype=ext3 rootwait
- PID hash table entries: 2048 (order: 1, 8192 bytes)
- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- Memory: 129MB 256MB = 385MB total
- Memory: 385788k/385788k available, 8452k reserved, 0K highmem
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- vmalloc : 0xe0800000 - 0xf0000000 ( 248 MB)
- lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- .init : 0xc0008000 - 0xc0025000 ( 116 kB)
- .text : 0xc0025000 - 0xc03c6000 (3716 kB)
- .data : 0xc03e2000 - 0xc040c7c0 ( 170 kB)
- Hierarchical RCU implementation.
- RCU-based detection of stalled CPUs is disabled.
- Verbose stalled-CPUs detection is disabled.
- NR_IRQS:374
- Console: colour dummy device 80x30
- Calibrating delay loop... 1061.68 BogoMIPS (lpj=5308416)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys freezer
- CPU: Testing write buffer coherency: ok
- CPU1: Booted secondary processor
- Brought up 2 CPUs
- SMP: Total of 2 processors activated (2123.36 BogoMIPS).
- NET: Registered protocol family 16
- L310 cache controller enabled
- l2x0: 8 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x40440000
- chip revision 420
- bio: create slab <bio-0> at 0
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- Advanced Linux Sound Architecture Driver Version 1.0.23.
- Switching to clocksource sti
- NET: Registered protocol family 2
- IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
- TCP: Hash tables configured (established 16384 bind 16384)
- TCP reno registered
- UDP hash table entries: 256 (order: 1, 8192 bytes)
- UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- NET: Registered protocol family 1
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- Power Management for EMXX.
- spi: registered device spi [spi]
- Starting pmu...
- ashmem: initialized
- msgmni has been set to 753
- io scheduler noop registered
- io scheduler deadline registered (default)
- io scheduler cfq registered
- emxx_fb: registered device fb
- Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- serial8250.0: ttyS0 at MMIO 0xe1020000 (irq = 40) is a TI16750
- console [ttyS0] enabled
- loop: module loaded
- i2c /dev entries driver
- Linux video capture interface: v2.00
- emxx_v4l2: registered device video0 [v4l2]
- emxx_camera : "EMXX: RJ6ABA100 Camera" registered device video1 [V4L2]
- PPP generic driver version 2.4.2
- PPP Deflate Compression module registered
- PPP BSD Compression module registered
- smsc911x: Driver version 2008-10-21.
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- emxx-ehci-driver emxx-ehci-driver: EMXX EHCI
- emxx-ehci-driver emxx-ehci-driver: new USB bus registered, assigned bus number 1
- emxx-ehci-driver emxx-ehci-driver: irq 115, io mem 0xe2701000
- emxx-ehci-driver emxx-ehci-driver: USB 2.0 started, EHCI 1.00
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- emxx-ohci-driver emxx-ohci-driver: EMXX OHCI
- emxx-ohci-driver emxx-ohci-driver: new USB bus registered, assigned bus number 2
- emxx-ohci-driver emxx-ohci-driver: irq 115, io mem 0xe2700000
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 1 port detected
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- udc: version Dec 28 2011
- android init
- android_probe pdata: c03f5adc
- android_bind
- android_usb gadget: android_usb ready
- udc: ----- VBUS OFF
- f_adb init
- android_register_function adb
- f_mass_storage init
- fsg_probe pdev: c03f5660, pdata: c03f5acc
- android_register_function usb_mass_storage
- android_usb gadget: Mass Storage Function, version: 2009/09/11
- android_usb gadget: Number of LUNs=1
- lun0: LUN: removable file: (no medium)
- adb_bind_config
- input: gpio-keys as /devices/platform/gpio-keys/input/input0
- input: pixcir168 as /devices/i2c-0/0-005c/input/input1
- emxx_ts:<3>pixcir i2c touchscreen driver 0-005c: insmod successfully!
- rtc-pcf8563 0-0051: chip found, driver version 0.4.3
- emxx_ts:<3>pixcir i2c touchscreen driver 0-005c: Unable to write to i2c touchscreen!
- using rtc device, rtc-pcf8563, for alarms
- rtc-pcf8563 0-0051: rtc core: registered rtc-pcf8563 as rtc0
- axp192_bat_init
- axp192_battery axp192_battery: axp192_bat_probe
- register power supply successful
- Starting wdt.
- emxx_sdio_probe: error!!(-22)
- emxx_sdio1: probe of emxx_sdio1.1 failed with error -22
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- logger: created 64K log 'log_main'
- logger: created 256K log 'log_events'
- logger: created 64K log 'log_radio'
- logger: created 64K log 'log_system'
- emxx_nts: registered device ntsc
- Starting sound codec.
- ALSA device list:
- #0: sound codec (emxx mixer)
- TCP cubic registered
- NET: Registered protocol family 17
- Skipping unavailable LED gpio 160 (led1)
- Skipping unavailable LED gpio 160 (led2)
- VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
- rtc-pcf8563 0-0051: low voltage detected, date/time is not reliable.
- rtc-pcf8563 0-0051: setting system clock to 1970-01-02 00:32:32 UTC (88352)
- touch_button:eKT2201 Detected(Product ID:0x22)
- input: tb_i2c as /devices/i2c-0/0-0010/input/input2
- touch_button:probe successfully!
- Waiting for root device /dev/mmcblk1p5...
- mmc0: new high speed MMC card at address 0001
- mmcblk0: mmc0:0001 SEM04G 3.68 GiB
- mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
- mmc1: host does not support reading read-only switch. assuming write-enable.
- mmc1: new high speed SD card at address e624
- mmcblk1: mmc1:e624 SU02G 1.84 GiB
- mmcblk1: p1 p2 p3 < p5 >
- EXT3-fs: barriers not enabled
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (mmcblk1p5): using internal journal
- EXT3-fs (mmcblk1p5): mounted filesystem with writeback data mode
- VFS: Mounted root (ext3 filesystem) on device 179:13.
- Freeing init memory: 116K
- INIT: version 2.88 booting
- > Arch Linux ARM
- > http://www.archlinuxarm.org
- ------------------------------
- mount: unknown filesystem type 'devtmpfs'
- mount: mount point /proc/sys/fs/binfmt_misc does not exist
- :: Mounting Root Read-Only [DONE]
- Your kernel does not have devtmpfs support. This is not supported.
- :: Adjusting system time and setting kernel timezone [DONE]
- :: Starting UDev Daemon [DONE]
- :: Triggering UDev uevents [DONE]
- :: Loading User-specified Modules [DONE]
- :: Waiting for UDev uevents to be processed [DONE]
- :: Configuring Virtual Consoles [FAIL]
- :: Bringing up loopback interface [DONE]
- :: Unlocking encrypted volumes: [DONE]
- :: Checking Filesystems [BUSY] /etc/rc.sysinit: line 111: /dev/stdout: Read-only file system
- [DONE]
- :: Remounting Root [BUSY] EXT3-fs (mmcblk1p5): using internal journal
- [DONE]
- :: Mounting Local Filesystems [DONE]
- :: Activating Swap [DONE]
- :: Configuring Time Zone [DONE]
- :: Initializing Random Seed [FAIL]
- :: Removing Leftover Files [DONE]
- :: Setting Hostname: alarm [DONE]
- :: Saving dmesg Log [BUSY] install: cannot stat '/dev/fd/63': No such file or directory
- [FAIL]
- INIT: Entering runlevel: 3
- :: Starting Syslog-NG [DONE]
- :: Starting Network [BUSY]
- Error: unknown interface in /etc/rc.conf: `eth0'
- [DONE]
- :: Mounting Network Filesystems [DONE]
- :: Starting crond daemon [DONE]
- :: Starting Secure Shell Daemon [BUSY] PRNG is not seeded
- PRNG is not seeded
- [FAIL]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement