API tools faq
paste
Guest User

Untitled

a guest
Dec 26th, 2018
690
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 29.53 KB | None | 0 0
raw download clone embed print report
  1. PASTE FROM WORKING RESOLUTION.
  2. LibreELEC2:~ # dmesg
  3. [ 0.000000] Booting Linux on physical CPU 0x0
  4. [ 0.000000] Linux version 4.20.0 (jernej@jernej-laptop) (gcc version 8.2.0 (GCC)) #1 SMP Tue Dec 25 18:20:36 CET 2018
  5. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  6. [ 0.000000] CPU: div instructions available: patching division code
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000] OF: fdt: Machine model: Xunlong Orange Pi PC
  9. [ 0.000000] Memory policy: Data cache writealloc
  10. [ 0.000000] cma: Reserved 256 MiB at 0x60000000
  11. [ 0.000000] On node 0 totalpages: 253952
  12. [ 0.000000] Normal zone: 1536 pages used for memmap
  13. [ 0.000000] Normal zone: 0 pages reserved
  14. [ 0.000000] Normal zone: 196608 pages, LIFO batch:63
  15. [ 0.000000] HighMem zone: 57344 pages, LIFO batch:15
  16. [ 0.000000] psci: probing for conduit method from DT.
  17. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
  18. [ 0.000000] percpu: Embedded 16 pages/cpu @(ptrval) s35724 r8192 d21620 u65536
  19. [ 0.000000] pcpu-alloc: s35724 r8192 d21620 u65536 alloc=16*4096
  20. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  21. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 252416
  22. [ 0.000000] Kernel command line: boot=UUID=2012-1219 disk=UUID=b7a86744-01a7-4821-9069-923159da8c2c quiet console=ttyS0,115200 console=tty1 root=/dev/ram0 rdinit=/init
  23. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  24. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  25. [ 0.000000] Memory: 731156K/1015808K available (7168K kernel code, 352K rwdata, 1756K rodata, 3072K init, 256K bss, 22508K reserved, 262144K cma-reserved, 229364K highmem)
  26. [ 0.000000] Virtual kernel memory layout:
  27. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  28. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  29. [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
  30. [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
  31. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  32. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  33. [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (8160 kB)
  34. [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (3072 kB)
  35. [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 353 kB)
  36. [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 257 kB)
  37. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  38. [ 0.000000] rcu: Hierarchical RCU implementation.
  39. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  40. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  41. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  42. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  43. [ 0.000000] GIC: Using split EOI/Deactivate mode
  44. [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  45. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  46. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  47. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  48. [ 0.000014] Switching to timer-based delay loop, resolution 41ns
  49. [ 0.000162] Console: colour dummy device 80x30
  50. [ 0.000175] printk: console [tty1] enabled
  51. [ 0.000213] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  52. [ 0.000222] pid_max: default: 32768 minimum: 301
  53. [ 0.000350] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  54. [ 0.000361] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  55. [ 0.000898] CPU: Testing write buffer coherency: ok
  56. [ 0.001197] /cpus/cpu@0 missing clock-frequency property
  57. [ 0.001232] /cpus/cpu@1 missing clock-frequency property
  58. [ 0.001253] /cpus/cpu@2 missing clock-frequency property
  59. [ 0.001274] /cpus/cpu@3 missing clock-frequency property
  60. [ 0.001291] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  61. [ 0.001721] Setting up static identity map for 0x40100000 - 0x40100060
  62. [ 0.001838] rcu: Hierarchical SRCU implementation.
  63. [ 0.002398] smp: Bringing up secondary CPUs ...
  64. [ 0.013031] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  65. [ 0.023734] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  66. [ 0.034391] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  67. [ 0.034467] smp: Brought up 1 node, 4 CPUs
  68. [ 0.034476] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  69. [ 0.034479] CPU: All CPU(s) started in HYP mode.
  70. [ 0.034482] CPU: Virtualization extensions available.
  71. [ 0.035304] devtmpfs: initialized
  72. [ 0.039079] random: get_random_u32 called from bucket_table_alloc+0x8c/0x198 with crng_init=0
  73. [ 0.039435] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  74. [ 0.039609] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  75. [ 0.039627] futex hash table entries: 1024 (order: 4, 65536 bytes)
  76. [ 0.047322] pinctrl core: initialized pinctrl subsystem
  77. [ 0.048221] NET: Registered protocol family 16
  78. [ 0.049523] DMA: preallocated 256 KiB pool for atomic coherent allocations
  79. [ 0.050267] cpuidle: using governor ladder
  80. [ 0.050290] cpuidle: using governor menu
  81. [ 0.050532] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  82. [ 0.050537] hw-breakpoint: maximum watchpoint size is 8 bytes.
  83. [ 0.064067] SCSI subsystem initialized
  84. [ 0.064294] libata version 3.00 loaded.
  85. [ 0.064479] usbcore: registered new interface driver usbfs
  86. [ 0.064522] usbcore: registered new interface driver hub
  87. [ 0.064573] usbcore: registered new device driver usb
  88. [ 0.064739] media: Linux media interface: v0.10
  89. [ 0.064766] videodev: Linux video capture interface: v2.00
  90. [ 0.064841] pps_core: LinuxPPS API ver. 1 registered
  91. [ 0.064845] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  92. [ 0.064860] PTP clock support registered
  93. [ 0.065188] Advanced Linux Sound Architecture Driver Initialized.
  94. [ 0.065926] clocksource: Switched to clocksource arch_sys_counter
  95. [ 0.072721] NET: Registered protocol family 2
  96. [ 0.073329] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  97. [ 0.073353] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  98. [ 0.073419] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  99. [ 0.073530] TCP: Hash tables configured (established 8192 bind 8192)
  100. [ 0.073627] UDP hash table entries: 512 (order: 2, 16384 bytes)
  101. [ 0.073685] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  102. [ 0.073898] NET: Registered protocol family 1
  103. [ 0.074366] RPC: Registered named UNIX socket transport module.
  104. [ 0.074370] RPC: Registered udp transport module.
  105. [ 0.074373] RPC: Registered tcp transport module.
  106. [ 0.074377] RPC: Registered tcp NFSv4.1 backchannel transport module.
  107. [ 0.183221] Initialise system trusted keyrings
  108. [ 0.183445] workingset: timestamp_bits=30 max_order=18 bucket_order=0
  109. [ 0.189207] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  110. [ 0.190137] NFS: Registering the id_resolver key type
  111. [ 0.190160] Key type id_resolver registered
  112. [ 0.190164] Key type id_legacy registered
  113. [ 0.190175] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  114. [ 0.192931] Key type asymmetric registered
  115. [ 0.192940] Asymmetric key parser 'x509' registered
  116. [ 0.192992] bounce: pool size: 64 pages
  117. [ 0.193043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  118. [ 0.193051] io scheduler noop registered (default)
  119. [ 0.193054] io scheduler deadline registered
  120. [ 0.193206] io scheduler cfq registered
  121. [ 0.193211] io scheduler mq-deadline registered
  122. [ 0.193216] io scheduler kyber registered
  123. [ 0.194037] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
  124. [ 0.197404] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  125. [ 0.198862] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
  126. [ 0.240894] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  127. [ 0.242924] printk: console [ttyS0] disabled
  128. [ 0.263096] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 41, base_baud = 1500000) is a U6_16550A
  129. [ 0.290573] printk: console [ttyS0] enabled
  130. [ 0.302764] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc084b6f0)
  131. [ 0.303009] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc08487dc)
  132. [ 0.303062] sun8i-dw-hdmi 1ee0000.hdmi: 1ee0000.hdmi supply hvcc not found, using dummy regulator
  133. [ 0.303142] sun8i-dw-hdmi 1ee0000.hdmi: Linked as a consumer to regulator.0
  134. [ 0.303891] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
  135. [ 0.304227] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
  136. [ 0.304463] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc084b098)
  137. [ 0.304469] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  138. [ 0.304473] [drm] No driver support for vblank timestamp query.
  139. [ 0.506821] random: fast init done
  140. [ 1.011126] Console: switching to colour frame buffer device 240x67
  141. [ 1.044422] sun4i-drm display-engine: fb0: DRM emulated frame buffer device
  142. [ 1.044833] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
  143. [ 1.053269] brd: module loaded
  144. [ 1.053369] loop: module loaded
  145. [ 1.067947] libphy: Fixed MDIO Bus: probed
  146. [ 1.067956] tun: Universal TUN/TAP device driver, 1.6
  147. [ 1.068111] CAN device driver interface
  148. [ 1.068638] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
  149. [ 1.068680] dwmac-sun8i 1c30000.ethernet: No regulator found
  150. [ 1.068980] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000)
  151. [ 1.068999] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
  152. [ 1.069005] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
  153. [ 1.069011] dwmac-sun8i 1c30000.ethernet: COE Type 2
  154. [ 1.069016] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
  155. [ 1.069021] dwmac-sun8i 1c30000.ethernet: Normal descriptors
  156. [ 1.069026] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
  157. [ 1.069147] libphy: stmmac: probed
  158. [ 1.069610] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
  159. [ 1.069705] libphy: mdio_mux: probed
  160. [ 1.069723] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
  161. [ 1.069731] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
  162. [ 1.070530] libphy: mdio_mux: probed
  163. [ 1.070984] usbcore: registered new interface driver r8152
  164. [ 1.070989] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  165. [ 1.070992] ehci-platform: EHCI generic platform driver
  166. [ 1.071143] ehci-platform 1c1a000.usb: EHCI Host Controller
  167. [ 1.071170] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
  168. [ 1.071527] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000
  169. [ 1.105956] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
  170. [ 1.106161] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
  171. [ 1.106169] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  172. [ 1.106174] usb usb1: Product: EHCI Host Controller
  173. [ 1.106179] usb usb1: Manufacturer: Linux 4.20.0 ehci_hcd
  174. [ 1.106184] usb usb1: SerialNumber: 1c1a000.usb
  175. [ 1.106688] hub 1-0:1.0: USB hub found
  176. [ 1.106724] hub 1-0:1.0: 1 port detected
  177. [ 1.107476] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  178. [ 1.107499] ohci-platform: OHCI generic platform driver
  179. [ 1.107640] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
  180. [ 1.107664] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
  181. [ 1.107869] ohci-platform 1c1a400.usb: irq 27, io mem 0x01c1a400
  182. [ 1.180100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
  183. [ 1.180107] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  184. [ 1.180113] usb usb2: Product: Generic Platform OHCI controller
  185. [ 1.180118] usb usb2: Manufacturer: Linux 4.20.0 ohci_hcd
  186. [ 1.180123] usb usb2: SerialNumber: 1c1a400.usb
  187. [ 1.180558] hub 2-0:1.0: USB hub found
  188. [ 1.180592] hub 2-0:1.0: 1 port detected
  189. [ 1.182048] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
  190. [ 1.182054] sun6i-rtc 1f00000.rtc: RTC enabled
  191. [ 1.182122] i2c /dev entries driver
  192. [ 1.184970] IR NEC protocol handler initialized
  193. [ 1.184976] IR RC5(x/sz) protocol handler initialized
  194. [ 1.184978] IR RC6 protocol handler initialized
  195. [ 1.184981] IR JVC protocol handler initialized
  196. [ 1.184984] IR Sony protocol handler initialized
  197. [ 1.184986] IR SANYO protocol handler initialized
  198. [ 1.184989] IR Sharp protocol handler initialized
  199. [ 1.184992] IR MCE Keyboard/mouse protocol handler initialized
  200. [ 1.184994] IR XMP protocol handler initialized
  201. [ 1.184997] ir_imon_decoder: IR iMON protocol handler initialized
  202. [ 1.185264] Registered IR keymap rc-empty
  203. [ 1.185337] rc rc0: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0
  204. [ 1.185715] input: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0/input0
  205. [ 1.186083] sunxi-ir 1f02000.ir: initialized sunXi IR driver
  206. [ 1.186603] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  207. [ 1.187000] cpu cpu0: Linked as a consumer to regulator.4
  208. [ 1.187052] cpu cpu0: Dropping the link to regulator.4
  209. [ 1.187193] cpu cpu0: Linked as a consumer to regulator.4
  210. [ 1.188206] sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2
  211. [ 1.188712] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  212. [ 1.213989] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
  213. [ 1.215190] usbcore: registered new interface driver usbhid
  214. [ 1.215196] usbhid: USB HID core driver
  215. [ 1.219377] cedrus 1c0e000.video-codec: Device registered as /dev/video0
  216. [ 1.221289] sun4i-codec 1c22c00.codec: ASoC: codec-analog@1f015c0 not registered
  217. [ 1.228896] sun4i-codec 1c22c00.codec: Failed to register our card
  218. [ 1.235770] sun4i-i2s 1c22800.i2s: Max playback channels changed from 2 to 8
  219. [ 1.244397] NET: Registered protocol family 10
  220. [ 1.245437] Segment Routing with IPv6
  221. [ 1.245510] NET: Registered protocol family 17
  222. [ 1.245521] can: controller area network core (rev 20170425 abi 9)
  223. [ 1.245580] NET: Registered protocol family 29
  224. [ 1.245585] can: raw protocol (rev 20170425)
  225. [ 1.245590] can: broadcast manager protocol (rev 20170425 t)
  226. [ 1.245597] can: netlink gateway (rev 20170425) max_hops=1
  227. [ 1.245755] Key type dns_resolver registered
  228. [ 1.245947] Registering SWP/SWPB emulation handler
  229. [ 1.246431] Loading compiled-in X.509 certificates
  230. [ 1.253435] simple-framebuffer 7e000000.framebuffer: framebuffer at 0x7e000000, 0x7e9000 bytes, mapped to 0x(ptrval)
  231. [ 1.253448] simple-framebuffer 7e000000.framebuffer: format=x8r8g8b8, mode=1920x1080x32, linelength=7680
  232. [ 1.253679] simple-framebuffer 7e000000.framebuffer: fb1: simplefb registered!
  233. [ 1.254104] sun4i-usb-phy 1c19400.phy: Linked as a consumer to regulator.5
  234. [ 1.254955] ehci-platform 1c1b000.usb: EHCI Host Controller
  235. [ 1.254982] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
  236. [ 1.255392] ehci-platform 1c1b000.usb: irq 28, io mem 0x01c1b000
  237. [ 1.275940] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
  238. [ 1.276152] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
  239. [ 1.276160] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  240. [ 1.276166] usb usb3: Product: EHCI Host Controller
  241. [ 1.276171] usb usb3: Manufacturer: Linux 4.20.0 ehci_hcd
  242. [ 1.276176] usb usb3: SerialNumber: 1c1b000.usb
  243. [ 1.276686] hub 3-0:1.0: USB hub found
  244. [ 1.276724] hub 3-0:1.0: 1 port detected
  245. [ 1.277396] ehci-platform 1c1c000.usb: EHCI Host Controller
  246. [ 1.277419] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 4
  247. [ 1.277710] ehci-platform 1c1c000.usb: irq 30, io mem 0x01c1c000
  248. [ 1.285730] mmc0: host does not support reading read-only switch, assuming write-enable
  249. [ 1.289057] mmc0: new high speed SDHC card at address aaaa
  250. [ 1.289908] mmcblk0: mmc0:aaaa SS08G 7.40 GiB
  251. [ 1.292739] mmcblk0: p1 p2
  252. [ 1.305953] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
  253. [ 1.306166] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
  254. [ 1.306174] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  255. [ 1.306179] usb usb4: Product: EHCI Host Controller
  256. [ 1.306185] usb usb4: Manufacturer: Linux 4.20.0 ehci_hcd
  257. [ 1.306190] usb usb4: SerialNumber: 1c1c000.usb
  258. [ 1.306650] hub 4-0:1.0: USB hub found
  259. [ 1.306686] hub 4-0:1.0: 1 port detected
  260. [ 1.307474] ehci-platform 1c1d000.usb: EHCI Host Controller
  261. [ 1.307501] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 5
  262. [ 1.307850] ehci-platform 1c1d000.usb: irq 32, io mem 0x01c1d000
  263. [ 1.335936] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
  264. [ 1.336108] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
  265. [ 1.336115] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  266. [ 1.336121] usb usb5: Product: EHCI Host Controller
  267. [ 1.336126] usb usb5: Manufacturer: Linux 4.20.0 ehci_hcd
  268. [ 1.336131] usb usb5: SerialNumber: 1c1d000.usb
  269. [ 1.336561] hub 5-0:1.0: USB hub found
  270. [ 1.336596] hub 5-0:1.0: 1 port detected
  271. [ 1.337238] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
  272. [ 1.337262] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6
  273. [ 1.337466] ohci-platform 1c1b400.usb: irq 29, io mem 0x01c1b400
  274. [ 1.410088] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
  275. [ 1.410096] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  276. [ 1.410102] usb usb6: Product: Generic Platform OHCI controller
  277. [ 1.410107] usb usb6: Manufacturer: Linux 4.20.0 ohci_hcd
  278. [ 1.410112] usb usb6: SerialNumber: 1c1b400.usb
  279. [ 1.410546] hub 6-0:1.0: USB hub found
  280. [ 1.410579] hub 6-0:1.0: 1 port detected
  281. [ 1.411210] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
  282. [ 1.411233] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7
  283. [ 1.411444] ohci-platform 1c1c400.usb: irq 31, io mem 0x01c1c400
  284. [ 1.480079] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
  285. [ 1.480087] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  286. [ 1.480092] usb usb7: Product: Generic Platform OHCI controller
  287. [ 1.480097] usb usb7: Manufacturer: Linux 4.20.0 ohci_hcd
  288. [ 1.480102] usb usb7: SerialNumber: 1c1c400.usb
  289. [ 1.480510] hub 7-0:1.0: USB hub found
  290. [ 1.480543] hub 7-0:1.0: 1 port detected
  291. [ 1.481173] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
  292. [ 1.481194] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8
  293. [ 1.481393] ohci-platform 1c1d400.usb: irq 33, io mem 0x01c1d400
  294. [ 1.550074] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.20
  295. [ 1.550082] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  296. [ 1.550087] usb usb8: Product: Generic Platform OHCI controller
  297. [ 1.550092] usb usb8: Manufacturer: Linux 4.20.0 ohci_hcd
  298. [ 1.550097] usb usb8: SerialNumber: 1c1d400.usb
  299. [ 1.550512] hub 8-0:1.0: USB hub found
  300. [ 1.550543] hub 8-0:1.0: 1 port detected
  301. [ 1.551199] usb_phy_generic usb_phy_generic.3.auto: usb_phy_generic.3.auto supply vcc not found, using dummy regulator
  302. [ 1.551261] usb_phy_generic usb_phy_generic.3.auto: Linked as a consumer to regulator.0
  303. [ 1.551538] musb-hdrc musb-hdrc.4.auto: MUSB HDRC host driver
  304. [ 1.551548] musb-hdrc musb-hdrc.4.auto: new USB bus registered, assigned bus number 9
  305. [ 1.551734] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
  306. [ 1.551741] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  307. [ 1.551747] usb usb9: Product: MUSB HDRC host driver
  308. [ 1.551752] usb usb9: Manufacturer: Linux 4.20.0 musb-hcd
  309. [ 1.551757] usb usb9: SerialNumber: musb-hdrc.4.auto
  310. [ 1.552163] hub 9-0:1.0: USB hub found
  311. [ 1.552196] hub 9-0:1.0: 1 port detected
  312. [ 1.553897] asoc-simple-card sound: i2s-hifi <-> 1c22800.i2s mapping ok
  313. [ 1.554956] sun4i-codec 1c22c00.codec: ASoC: Failed to create component debugfs directory
  314. [ 1.556093] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
  315. [ 1.556954] printk: console [netcon0] enabled
  316. [ 1.556957] netconsole: network logging started
  317. [ 1.557001] sun6i-rtc 1f00000.rtc: setting system clock to 2018-12-26 11:28:45 UTC (1545823725)
  318. [ 1.557280] vcc3v0: disabling
  319. [ 1.557286] vcc5v0: disabling
  320. [ 1.557291] usb0-vbus: disabling
  321. [ 1.557297] ALSA device list:
  322. [ 1.557300] #0: allwinner-hdmi
  323. [ 1.557303] #1: H3 Audio Codec
  324. [ 1.560493] Freeing unused kernel memory: 3072K
  325. [ 1.606168] Run /init as init process
  326. [ 2.085965] usb 7-1: new full-speed USB device number 2 using ohci-platform
  327. [ 2.357080] usb 7-1: New USB device found, idVendor=062a, idProduct=4101, bcdDevice= 1.08
  328. [ 2.357096] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  329. [ 2.357103] usb 7-1: Product: 2.4G Keyboard Mouse
  330. [ 2.357108] usb 7-1: Manufacturer: MOSART Semi.
  331. [ 2.365387] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/soc/1c1c400.usb/usb7/7-1/7-1:1.0/0003:062A:4101.0001/input/input1
  332. [ 2.426595] hid-generic 0003:062A:4101.0001: input: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-1c1c400.usb-1/input0
  333. [ 2.434008] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/soc/1c1c400.usb/usb7/7-1/7-1:1.1/0003:062A:4101.0002/input/input2
  334. [ 2.434469] input: MOSART Semi. 2.4G Keyboard Mouse Consumer Control as /devices/platform/soc/1c1c400.usb/usb7/7-1/7-1:1.1/0003:062A:4101.0002/input/input3
  335. [ 2.496607] input: MOSART Semi. 2.4G Keyboard Mouse System Control as /devices/platform/soc/1c1c400.usb/usb7/7-1/7-1:1.1/0003:062A:4101.0002/input/input4
  336. [ 2.496859] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/soc/1c1c400.usb/usb7/7-1/7-1:1.1/0003:062A:4101.0002/input/input5
  337. [ 2.496983] hid-generic 0003:062A:4101.0002: input: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-1c1c400.usb-1/input1
  338. [ 2.558932] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  339. [ 3.072631] systemd[1]: Failed to insert module 'autofs4': No such file or directory
  340. [ 3.103575] systemd[1]: systemd 239 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  341. [ 3.104016] systemd[1]: Detected architecture arm.
  342. [ 3.104729] systemd[1]: Set hostname to <LibreELEC>.
  343. [ 3.170952] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  344. [ 3.170970] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  345. [ 3.278777] random: systemd: uninitialized urandom read (16 bytes read)
  346. [ 3.280497] systemd[1]: Listening on RPCbind Server Activation Socket.
  347. [ 3.280919] random: systemd: uninitialized urandom read (16 bytes read)
  348. [ 3.280983] systemd[1]: Reached target RPC Port Mapper.
  349. [ 3.281087] random: systemd: uninitialized urandom read (16 bytes read)
  350. [ 3.281615] systemd[1]: Listening on udev Kernel Socket.
  351. [ 3.284408] systemd[1]: Starting Debug Shell on /dev/console...
  352. [ 3.285668] systemd[1]: Listening on Journal Socket.
  353. [ 3.473522] kernel-overlays-setup: setup base modules
  354. [ 3.498498] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.20.0
  355. [ 3.548398] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  356. [ 3.548674] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  357. [ 3.552957] kernel-overlays-setup: done
  358. [ 3.854547] systemd-journald[189]: Received request to flush runtime journal from PID 1
  359. [ 4.331076] synth uevent: /devices/platform/soc/1f02000.ir/rc/rc0/input0: failed to send uevent
  360. [ 4.331088] input input0: uevent: failed to send synthetic uevent
  361. [ 4.541926] random: crng init done
  362. [ 4.541942] random: 7 urandom warning(s) missed due to ratelimiting
  363. [ 5.882321] mali: loading out-of-tree module taints kernel.
  364. [ 5.913595] Mali<2>:
  365. [ 5.913605] Inserting Mali v900 device driver.
  366. [ 5.913614] Mali<2>:
  367. [ 5.913617] Compiled: Dec 25 2018, time: 18:21:58.
  368. [ 5.913619] Mali<2>:
  369. [ 5.913622] Driver revision: r9p0-01rel0-8.90.009-143-gcdd7be068f
  370. [ 5.913623] Mali<2>:
  371. [ 5.913625] mali_module_init() registering device
  372. [ 5.920042] Allwinner sunXi mali glue initialized
  373. [ 5.920054] Mali<2>:
  374. [ 5.920057] mali_module_init() registering driver
  375. [ 5.920260] Mali<2>:
  376. [ 5.920266] mali_probe(): Called for platform device mali-utgard
  377. [ 5.920412] Mali<2>:
  378. [ 5.920420] Mali SWAP: Swap out threshold vaule is 60M
  379. [ 5.920441] Mali<2>:
  380. [ 5.920445] Mali memory settings (shared: 0x3CD05000)
  381. [ 5.920449] Mali<2>:
  382. [ 5.920452] Using device defined frame buffer settings (0x00000000@0x00000000)
  383. [ 5.920462] Mali<2>:
  384. [ 5.920463] Mali PMU: Creating Mali PMU core
  385. [ 5.920509] Mali<2>:
  386. [ 5.920511] Get pmu config from platform device data.
  387. [ 5.920514] Mali<2>:
  388. [ 5.920516] Using hw detect pmu config:
  389. [ 5.920524] Mali<2>:
  390. [ 5.920527] domain_config[0] = 0x1
  391. [ 5.920529] Mali<2>:
  392. [ 5.920532] domain_config[1] = 0x4
  393. [ 5.920534] Mali<2>:
  394. [ 5.920536] domain_config[2] = 0x8
  395. [ 5.920538] Mali<2>:
  396. [ 5.920540] domain_config[9] = 0x2
  397. [ 5.920544] Mali<2>:
  398. [ 5.920547] Mali PM domain: Creating Mali PM domain (mask=0x00000001)
  399. [ 5.920549] Mali<2>:
  400. [ 5.920551] Mali PM domain: Creating Mali PM domain (mask=0x00000004)
  401. [ 5.920553] Mali<2>:
  402. [ 5.920556] Mali PM domain: Creating Mali PM domain (mask=0x00000008)
  403. [ 5.920558] Mali<2>:
  404. [ 5.920560] Mali PM domain: Creating Mali PM domain (mask=0x00000002)
  405. [ 5.920562] Mali<2>:
  406. [ 5.920564] Mali PM domain: Creating Mali PM domain (mask=0x00001000)
  407. [ 5.920607] Mali<2>:
  408. [ 5.920610] Mali PP: Creating Mali PP core: Mali_PP0
  409. [ 5.920613] Mali<2>:
  410. [ 5.920615] Mali PP: Base address of PP core: 0x1c48000
  411. [ 5.922599] Mali<2>:
  412. [ 5.922610] Found Mali GPU Mali-400 MP r1p1
  413. [ 5.925664] Mali<2>:
  414. [ 5.925682] Mali L2 cache: Created Mali_L2: 64K, 4-way, 64byte cache line, 64bit external bus
  415. [ 5.925708] Mali<2>:
  416. [ 5.925711] Mali MMU: Creating Mali MMU: Mali_GP_MMU
  417. [ 5.925804] Mali<2>:
  418. [ 5.925810] mali_mmu_probe_irq_acknowledge: intstat 0x3
  419. [ 5.925816] Mali<2>:
  420. [ 5.925818] Probe: Page fault detect: PASSED
  421. [ 5.925820] Mali<2>:
  422. [ 5.925822] Probe: Bus read error detect: PASSED
  423. [ 5.925899] Mali<2>:
  424. [ 5.925905] Mali GP: Creating Mali GP core: Mali_GP
  425. [ 5.926101] Mali<2>:
  426. [ 5.926106] Mali MMU: Creating Mali MMU: Mali_PP0_MMU
  427. [ 5.926180] Mali<2>:
  428. [ 5.926188] mali_mmu_probe_irq_acknowledge: intstat 0x3
  429. [ 5.926193] Mali<2>:
  430. [ 5.926197] Probe: Page fault detect: PASSED
  431. [ 5.926211] Mali<2>:
  432. [ 5.926214] Probe: Bus read error detect: PASSED
  433. [ 5.926259] Mali<2>:
  434. [ 5.926264] Mali PP: Creating Mali PP core: Mali_PP0
  435. [ 5.926266] Mali<2>:
  436. [ 5.926271] Mali PP: Base address of PP core: 0x1c48000
  437. [ 5.926337] Mali<2>:
  438. [ 5.926340] Mali MMU: Creating Mali MMU: Mali_PP1_MMU
  439. [ 5.926421] Mali<2>:
  440. [ 5.926427] mali_mmu_probe_irq_acknowledge: intstat 0x3
  441. [ 5.926430] Mali<2>:
  442. [ 5.926432] Probe: Page fault detect: PASSED
  443. [ 5.926434] Mali<2>:
  444. [ 5.926436] Probe: Bus read error detect: PASSED
  445. [ 5.926469] Mali<2>:
  446. [ 5.926472] Mali PP: Creating Mali PP core: Mali_PP1
  447. [ 5.926474] Mali<2>:
  448. [ 5.926477] Mali PP: Base address of PP core: 0x1c4a000
  449. [ 5.926546] Mali<2>:
  450. [ 5.926549] 2+0 PP cores initialized
  451. [ 5.926568] Mali<2>:
  452. [ 5.926570] Mali GPU Utilization: No platform utilization handler installed
  453. [ 5.926575] Mali<2>:
  454. [ 5.926577] Mali DVFS init: platform function callback incomplete, need check mali_gpu_device_data in platform .
  455. [ 5.941937] Mali<2>:
  456. [ 5.941944] mali_probe(): Successfully initialized driver for platform device mali-utgard
  457. [ 5.942137] Mali:
  458. [ 5.942140] Mali device driver loaded
  459. [ 6.306194] Generic PHY 0.1:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0.1:01, irq=POLL)
  460. [ 6.308293] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
  461. [ 6.308311] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
  462. [ 6.308319] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
  463. [ 6.308721] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  464. [ 7.356657] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  465. [ 7.356711] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  466. [ 7.393725] 8021q: 802.1Q VLAN Support v1.8
  467. [ 22.643457] cec-dw_hdmi: message 11 timed out
  468. [ 24.806178] cec-dw_hdmi: message 11 timed out
  469. [ 26.968952] cec-dw_hdmi: message 22 timed out
  470. [ 29.131652] cec-dw_hdmi: message 22 timed out
  471. [ 31.294336] cec-dw_hdmi: message 99 timed out
  472. [ 33.457005] cec-dw_hdmi: message 99 timed out
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!