API tools faq
paste
johntdavis

QNAP M2108-2C Switch: Serial Output on Boot (UBoot Console)

johntdavis
Jul 10th, 2021
449
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 28.75 KB | None | 0 0
raw download clone embed print report
  1. [ 4005.717726] device eth0 left promiscuous mode
  2. [ 4005.724498] br-lan: port 1(eth0) entered disabled state
  3. [ 4005.779799] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  4. [ 4007.003638] Shutdown all sfp led
  5. [ 4008.932432] sync and umount all
  6. [ 4009.001041] UBIFS (ubi3:0): un-mount UBI device 3
  7. [ 4009.005848] UBIFS (ubi3:0): background thread “ubifs_bgt3_0” stops
  8. [ 4009.171880] mvDmaDrv_release(file=df7bba00) data=dc53cd80
  9. [ 4009.177361] dma_free_coherent(dc5b7e00, 0x200000, e0f9b000, 0x1ca00000)
  10. [ 4012.098134] reboot: Restarting system
  11.  
  12.  
  13. BootROM 1.41
  14.  
  15. Booting from NAND flash
  16.  
  17.  
  18.  
  19. General initialization - Version: 1.0.0
  20.  
  21. Serdes initialization - Version: 1.0.2
  22.  
  23. DDR3 Training Sequence - Ver TIP-1.55.0
  24.  
  25. DDR3 Training Sequence - Switching XBAR Window to FastPath Window
  26.  
  27. DDR3 Training Sequence - Ended Successfully
  28.  
  29. BootROM: Image checksum verification PASSED
  30.  
  31.  
  32. __ __ _ _
  33. | \/ | __ _ _ ____ _____| | |
  34. | |\/| |/ _` | ‘__\ \ / / _ \ | |
  35. | | | | (_| | | \ V / __/ | |
  36. |_| |_|\__,_|_| \_/ \___|_|_|
  37. _ _ ____ _
  38. | | | | | __ ) ___ ___ | |_
  39. | | | |___| _ \ / _ \ / _ \| __|
  40. | |_| |___| |_) | (_) | (_) | |_
  41. \___/ |____/ \___/ \___/ \__|
  42. ** LOADER **
  43.  
  44.  
  45. U-Boot 2013.01 (Oct 24 2020 - 20:50:23) Marvell version: 2016_T1.0.eng_drop_v6
  46.  
  47. Board: ALLEYCAT3-Customer-Board-0
  48. SoC: Alleycat3 Rev A1
  49. mvCtrlGetCpuNum: Error: DevID (0XF504) is not found in CPU cores count per device table!
  50. CPU: Marvell PJ4B (584) v7 (Rev 2) LE
  51. mvCtrlGetCpuNum: Error: DevID (0XF504) is not found in CPU cores count per device table!
  52. CPU @ 800 [MHz]
  53. L2 @ 200 [MHz]
  54. TClock @ 200 [MHz]
  55. DDR @ 800 [MHz]
  56. DDR 16Bit Width, FastPath Memory Access, DLB Enabled
  57. DDR ECC Disabled
  58. DRAM: 512 MiB
  59. NAND: 512 MiB
  60. PCI-e 0: Detected No Link.
  61. FPU initialized to Run Fast Mode.
  62. USB2.0 0: Host Mode
  63.  
  64. Map: Code: 0x1feda000:0x1ff959a4
  65. BSS: 0x1ffefc50
  66. Stack: 0x1f9d9ef0
  67. Heap: 0x1f9da000:0x1feda000
  68. U-Boot Environment: 0x00500000:0x00510000 (NAND)
  69.  
  70. Net:
  71. | port | Interface | PHY address |
  72. |————|—————|———————|
  73. | egiga0 | SGMII | In-Band |
  74. | egiga1 | SGMII | In-Band |
  75. egiga0 [PRIME], egiga1
  76. Hit any key to stop autoboot: 3  2  1  0
  77. Creating 1 MTD partitions on “nand0”:
  78. 0x000006000000-0x000007000000 : “mtd=4”
  79. UBI: attaching mtd1 to ubi0
  80. UBI: physical eraseblock size: 262144 bytes (256 KiB)
  81. UBI: logical eraseblock size: 253952 bytes
  82. UBI: smallest flash I/O unit: 4096
  83. UBI: VID header offset: 4096 (aligned 4096)
  84. UBI: data offset: 8192
  85. UBI: attached mtd1 to ubi0
  86. UBI: MTD device name: “mtd=4”
  87. UBI: MTD device size: 16 MiB
  88. UBI: number of good PEBs: 64
  89. UBI: number of bad PEBs: 0
  90. UBI: max. allowed volumes: 128
  91. UBI: wear-leveling threshold: 4096
  92. UBI: number of internal volumes: 1
  93. UBI: number of user volumes: 1
  94. UBI: available PEBs: 0
  95. UBI: total number of reserved PEBs: 64
  96. UBI: number of PEBs reserved for bad PEB handling: 2
  97. UBI: max/mean erase counter: 10/5
  98. UBIFS: recovery needed
  99. UBIFS: recovery deferred
  100. UBIFS: mounted UBI device 0, volume 0, name “nand_config”
  101. UBIFS: mounted read-only
  102. UBIFS: file system size: 12189696 bytes (11904 KiB, 11 MiB, 48 LEBs)
  103. UBIFS: journal size: 9404416 bytes (9184 KiB, 8 MiB, 38 LEBs)
  104. UBIFS: media format: w4/r0 (latest is w4/r0)
  105. UBIFS: default compressor: no compression
  106. UBIFS: reserved for root: 0 bytes (0 KiB)
  107. Loading file ‘/boot/boot’ to addr 0x01600000 with size 2 (0x00000002)…
  108. Done
  109. Loading file ‘/boot/partition’ to addr 0x01700000 with size 2 (0x00000002)…
  110. Done
  111. Unmounting UBIFS volume nand_config!
  112. Total of 1 word(s) were the same
  113. boot from fw1
  114. UBI: mtd1 is detached from ubi0
  115. Creating 1 MTD partitions on “nand0”:
  116. 0x000002000000-0x000004000000 : “mtd=2”
  117. UBI: attaching mtd1 to ubi0
  118. UBI: physical eraseblock size: 262144 bytes (256 KiB)
  119. UBI: logical eraseblock size: 253952 bytes
  120. UBI: smallest flash I/O unit: 4096
  121. UBI: VID header offset: 4096 (aligned 4096)
  122. UBI: data offset: 8192
  123. UBI: attached mtd1 to ubi0
  124. UBI: MTD device name: “mtd=2”
  125. UBI: MTD device size: 32 MiB
  126. UBI: number of good PEBs: 128
  127. UBI: number of bad PEBs: 0
  128. UBI: max. allowed volumes: 128
  129. UBI: wear-leveling threshold: 4096
  130. UBI: number of internal volumes: 1
  131. UBI: number of user volumes: 1
  132. UBI: available PEBs: 0
  133. UBI: total number of reserved PEBs: 128
  134. UBI: number of PEBs reserved for bad PEB handling: 2
  135. UBI: max/mean erase counter: 4/1
  136. UBIFS: mounted UBI device 0, volume 0, name “nand_fw1”
  137. UBIFS: mounted read-only
  138. UBIFS: file system size: 28442624 bytes (27776 KiB, 27 MiB, 112 LEBs)
  139. UBIFS: journal size: 9404416 bytes (9184 KiB, 8 MiB, 38 LEBs)
  140. UBIFS: media format: w4/r0 (latest is w4/r0)
  141. UBIFS: default compressor: no compression
  142. UBIFS: reserved for root: 0 bytes (0 KiB)
  143. Loading file ‘fdt’ to addr 0x04000000 with size 10892 (0x00002a8c)…
  144. Done
  145. md5 for 04000000 … 04002a8b ==> c33a92247de7b043bd3ccd30bab35d84
  146. Loading file ‘fdt.md5sum’ to addr 0x01000000 with size 38 (0x00000026)…
  147. Done
  148. Loading file ‘zImage’ to addr 0x05000000 with size 5620488 (0x0055c308)…
  149. Done
  150. md5 for 05000000 … 0555c307 ==> 1c60e9687757a66aa4ff72296b79a161
  151. Loading file ‘zImage.md5sum’ to addr 0x01200000 with size 41 (0x00000029)…
  152. Done
  153. Loading file ‘initramfs’ to addr 0x06000000 with size 4371772 (0x0042b53c)…
  154. Done
  155. md5 for 06000000 … 0642b53b ==> c5bbaf2ec3a68c559b9cd209e9feca64
  156. Loading file ‘initramfs.md5sum’ to addr 0x01400000 with size 44 (0x0000002c)…
  157. Done
  158. Unmounting UBIFS volume nand_fw1!
  159. Total of 8 word(s) were the same
  160. fdt match
  161. Total of 8 word(s) were the same
  162. kernel match
  163. Total of 8 word(s) were the same
  164. initramfs match
  165. ## Flattened Device Tree blob at 04000000
  166. Booting using the fdt blob at 0x04000000
  167. Loading Device Tree to 00ffa000, end 00fffa8b … OK
  168.  
  169. Skipping Device Tree update (‘fdt_skip_update’ = yes)
  170.  
  171. Starting kernel …
  172.  
  173. [ 0.000000] Booting Linux on physical CPU 0x0
  174. [ 0.000000] Linux version 4.4.120 (root@runner-xr-vaenz-project-66-concurrent-0) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3979-2252731af4) ) #0 SMP PREEMPT Thu Aug 30 12:10:54 2018
  175. [ 0.000000] CPU: ARMv7 Processor [562f5842] revision 2 (ARMv7), cr=10c5387d
  176. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  177. [ 0.000000] Machine model: Marvell AlleyCat3 Development Board DB-XC3-48G4XG
  178. [ 0.000000] Memory policy: Data cache writealloc
  179. [ 0.000000] PERCPU: Embedded 12 pages/cpu @dfbd5000 s18368 r8192 d22592 u49152
  180. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  181. [ 0.000000] Kernel command line: rdinit=/sbin/init initrd=0x6000000,0x42B53C console=ttyS0,115200 earlyprintk=ttyS0 bootfw=1
  182. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  183. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  184. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  185. [ 0.000000] Memory: 504076K/524288K available (8171K kernel code, 279K rwdata, 2160K rodata, 320K init, 312K bss, 20212K reserved, 0K cma-reserved, 0K highmem)
  186. [ 0.000000] Virtual kernel memory layout:
  187. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  188. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  189. [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
  190. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  191. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  192. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  193. [ 0.000000] .text : 0xc0008000 - 0xc0a1f048 (10333 kB)
  194. [ 0.000000] .init : 0xc0a20000 - 0xc0a70000 ( 320 kB)
  195. [ 0.000000] .data : 0xc0a70000 - 0xc0ab5c60 ( 280 kB)
  196. [ 0.000000] .bss : 0xc0ab5c60 - 0xc0b03d1c ( 313 kB)
  197. [ 0.000000] Preemptible hierarchical RCU implementation.
  198. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  199. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  200. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
  201. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  202. [ 0.000000] Aurora cache controller enabled, 8 ways, 512 kB
  203. [ 0.000000] Aurora: CACHE_ID 0x00000100, AUX_CTRL 0x1a68e712
  204. [ 0.000000] Switching to timer-based delay loop, resolution 40ns
  205. [ 0.000007] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
  206. [ 0.000025] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
  207. [ 0.000454] Console: colour dummy device 80x30
  208. [ 0.000477] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=25000)
  209. [ 0.000495] pid_max: default: 32768 minimum: 301
  210. [ 0.000639] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  211. [ 0.000652] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  212. [ 0.001261] CPU: Testing write buffer coherency: ok
  213. [ 0.001487] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  214. [ 0.001823] Setting up static identity map for 0x8280 - 0x82d8
  215. [ 0.002221] mvebu-soc-id: MVEBU SoC ID=0xF504, Rev=0x4
  216. [ 0.002390] mvebu-pmsu: Initializing Power Management Service Unit
  217. [ 0.010165] Booting CPU 1
  218. [ 0.010414] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  219. [ 0.010503] Brought up 2 CPUs
  220. [ 0.010520] SMP: Total of 2 processors activated (100.00 BogoMIPS).
  221. [ 0.010529] CPU: All CPU(s) started in SVC mode.
  222. [ 0.011170] devtmpfs: initialized
  223. [ 0.015075] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
  224. [ 0.015523] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  225. [ 0.015554] futex hash table entries: 512 (order: 3, 32768 bytes)
  226. [ 0.015828] xor: measuring software checksum speed
  227. [ 0.025080] arm4regs : 752.000 MB/sec
  228. [ 0.035075] 8regs : 564.000 MB/sec
  229. [ 0.045077] 32regs : 660.000 MB/sec
  230. [ 0.045088] xor: using function: arm4regs (752.000 MB/sec)
  231. [ 0.045123] pinctrl core: initialized pinctrl subsystem
  232. [ 0.046273] NET: Registered protocol family 16
  233. [ 0.046673] DMA: preallocated 256 KiB pool for atomic coherent allocations
  234. [ 0.054635] No ATAGs?
  235. [ 0.054676] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 1
  236. [ 0.054692] hw-breakpoint: CPU 1 failed to disable vector catch
  237. [ 0.054707] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
  238. [ 0.093213] raid6: int32x1 gen() 66 MB/s
  239. [ 0.110351] raid6: int32x1 xor() 93 MB/s
  240. [ 0.127206] raid6: int32x2 gen() 117 MB/s
  241. [ 0.144296] raid6: int32x2 xor() 115 MB/s
  242. [ 0.161452] raid6: int32x4 gen() 136 MB/s
  243. [ 0.178291] raid6: int32x4 xor() 107 MB/s
  244. [ 0.195271] raid6: int32x8 gen() 191 MB/s
  245. [ 0.212327] raid6: int32x8 xor() 99 MB/s
  246. [ 0.212338] raid6: using algorithm int32x8 gen() 191 MB/s
  247. [ 0.212347] raid6: …. xor() 99 MB/s, rmw enabled
  248. [ 0.212356] raid6: using intx1 recovery algorithm
  249. [ 0.213219] vgaarb: loaded
  250. [ 0.213590] SCSI subsystem initialized
  251. [ 0.214126] usbcore: registered new interface driver usbfs
  252. [ 0.214230] usbcore: registered new interface driver hub
  253. [ 0.214313] usbcore: registered new device driver usb
  254. [ 0.214914] pps_core: LinuxPPS API ver. 1 registered
  255. [ 0.214928] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  256. [ 0.214974] PTP clock support registered
  257. [ 0.216794] Advanced Linux Sound Architecture Driver Initialized.
  258. [ 0.217591] Bluetooth: Core ver 2.21
  259. [ 0.217665] NET: Registered protocol family 31
  260. [ 0.217677] Bluetooth: HCI device and connection manager initialized
  261. [ 0.217694] Bluetooth: HCI socket layer initialized
  262. [ 0.217710] Bluetooth: L2CAP socket layer initialized
  263. [ 0.217750] Bluetooth: SCO socket layer initialized
  264. [ 0.218619] clocksource: Switched to clocksource armada_370_xp_clocksource
  265. [ 0.234222] NET: Registered protocol family 2
  266. [ 0.234912] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  267. [ 0.234969] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  268. [ 0.235023] TCP: Hash tables configured (established 4096 bind 4096)
  269. [ 0.235088] UDP hash table entries: 256 (order: 1, 8192 bytes)
  270. [ 0.235115] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  271. [ 0.235325] NET: Registered protocol family 1
  272. [ 0.236890] RPC: Registered named UNIX socket transport module.
  273. [ 0.236904] RPC: Registered udp transport module.
  274. [ 0.236913] RPC: Registered tcp transport module.
  275. [ 0.236922] RPC: Registered tcp NFSv4.1 backchannel transport module.
  276. [ 0.237216] Unpacking initramfs…
  277. [ 2.389287] Freeing initrd memory: 4272K
  278. [ 2.389694] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  279. [ 2.393654] Installing knfsd (copyright © 1996 [email protected]).
  280. [ 2.395495] async_tx: api initialized (async)
  281. [ 2.395744] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  282. [ 2.395769] io scheduler noop registered
  283. [ 2.395786] io scheduler deadline registered
  284. [ 2.395810] io scheduler cfq registered (default)
  285. [ 2.397752] msys-pinctrl f1018000.pinctrl: registered pinctrl driver
  286. [ 2.398471] irq: Cannot allocate irq_descs @ IRQ37, assuming pre-allocated
  287. [ 2.398833] irq: Cannot allocate irq_descs @ IRQ69, assuming pre-allocated
  288. [ 2.398933] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  289. [ 2.404034] libphy: Fixed MDIO Bus: probed
  290. [ 2.404056] tun: Universal TUN/TAP device driver, 1.6
  291. [ 2.404066] tun: © 1999-2004 Max Krasnyansky <[email protected]>
  292. [ 2.404341] libphy: mdio_driver_register: mv88e6xxx
  293. [ 2.404739] libphy: orion_mdio_bus: probed
  294. [ 2.408083] mvneta f1070000.ethernet eth0: Using device tree mac address 00:50:43:6f:6f:6f
  295. [ 2.410522] mvneta f1074000.ethernet eth1: Using device tree mac address 00:50:43:6f:6f:6f
  296. [ 2.411257] e1000e: Intel® PRO/1000 Network Driver - 3.2.6-k
  297. [ 2.411270] e1000e: Copyright© 1999 - 2015 Intel Corporation.
  298. [ 2.411385] ixgbe: Intel® 10 Gigabit PCI Express Network Driver - version 4.2.1-k
  299. [ 2.411396] ixgbe: Copyright © 1999-2015 Intel Corporation.
  300. [ 2.411517] ixgb: Intel® PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
  301. [ 2.411528] ixgb: Copyright © 1999-2008 Intel Corporation.
  302. [ 2.411856] usbcore: registered new interface driver r8152
  303. [ 2.411938] usbcore: registered new interface driver cdc_ether
  304. [ 2.412792] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
  305. [ 2.412815] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
  306. [ 2.412829] pci_bus 0000:00: root bus resource [mem 0xe8000000-0xefdfffff]
  307. [ 2.412845] pci_bus 0000:00: root bus resource [bus 00-ff]
  308. [ 2.413226] PCI: bus0: Fast back to back transfers disabled
  309. [ 2.413244] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  310. [ 2.413427] PCI: bus1: Fast back to back transfers enabled
  311. [ 2.413482] pci 0000:00:01.0: PCI bridge to [bus 01]
  312. [ 2.413806] mv_xor f10f0800.xor: Marvell shared XOR driver
  313. [ 2.431425] mv_xor f10f0800.xor: Marvell XOR (Registers Mode): ( xor cpy intr pq )
  314. [ 2.527510] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  315. [ 2.530096] console [ttyS0] disabled
  316. [ 2.550972] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A
  317. [ 3.401306] console [ttyS0] enabled
  318. [ 3.426097] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 22, base_baud = 12500000) is a 16550A
  319. [ 3.443805] loop: module loaded
  320. [ 3.448877] pxa3xx-nand f10d0000.nand: This platform can’t do DMA on this device
  321. [ 3.457225] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xdc
  322. [ 3.463729] nand: Micron MT29F4G08ABAEAWP
  323. [ 3.467800] nand: 512 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 224
  324. [ 3.475525] pxa3xx-nand f10d0000.nand: ECC strength 16, ECC step size 1024
  325. [ 3.483194] Bad block table found at page 131008, version 0x01
  326. [ 3.490284] Bad block table found at page 130944, version 0x01
  327. [ 3.496931] 8 fixed-partitions partitions found on MTD device pxa3xx_nand-0
  328. [ 3.503957] Creating 8 MTD partitions on “pxa3xx_nand-0”:
  329. [ 3.509416] 0x000000000000-0x000000500000 : “boot”
  330. [ 3.515706] 0x000000500000-0x000002000000 : “env”
  331. [ 3.521999] 0x000002000000-0x000004000000 : “fw1”
  332. [ 3.528296] 0x000004000000-0x000006000000 : “fw2”
  333. [ 3.534643] 0x000006000000-0x000007000000 : “config”
  334. [ 3.541158] 0x000007000000-0x00000a000000 : “log”
  335. [ 3.547616] 0x00000a000000-0x000019000000 : “binary”
  336. [ 3.556271] 0x000019000000-0x000020000000 : “temp”
  337. [ 3.565150] m25p80 spi0.0: unrecognized JEDEC id bytes: ff, ff, ff
  338. [ 3.571418] m25p80: probe of spi0.0 failed with error -2
  339. [ 3.577101] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
  340. [ 3.583701] ehci-pci: EHCI PCI platform driver
  341. [ 3.588299] ehci-platform: EHCI generic platform driver
  342. [ 3.593751] ehci-orion: EHCI orion driver
  343. [ 3.597974] orion-ehci f1050000.usb: EHCI Host Controller
  344. [ 3.603455] orion-ehci f1050000.usb: new USB bus registered, assigned bus number 1
  345. [ 3.611214] orion-ehci f1050000.usb: irq 28, io mem 0xf1050000
  346. [ 3.622585] orion-ehci f1050000.usb: USB 2.0 started, EHCI 1.00
  347. [ 3.629512] hub 1-0:1.0: USB hub found
  348. [ 3.633361] hub 1-0:1.0: 1 port detected
  349. [ 3.638357] usbcore: registered new interface driver usb-storage
  350. [ 3.644891] mousedev: PS/2 mouse device common for all mice
  351. [ 3.652820] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0
  352. [ 3.660094] i2c /dev entries driver
  353. [ 3.665842] orion_wdt: Initial timeout 687 sec
  354. [ 3.670515] md: raid0 personality registered for level 0
  355. [ 3.675893] md: raid1 personality registered for level 1
  356. [ 3.681517] md: raid6 personality registered for level 6
  357. [ 3.686889] md: raid5 personality registered for level 5
  358. [ 3.692261] md: raid4 personality registered for level 4
  359. [ 3.697925] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
  360. [ 3.706900] sdhci: Secure Digital Host Controller Interface driver
  361. [ 3.713171] sdhci: Copyright© Pierre Ossman
  362. [ 3.717876] sdhci-pltfm: SDHCI platform and OF driver helper
  363. [ 3.724678] usbcore: registered new interface driver usbhid
  364. [ 3.730320] usbhid: USB HID core driver
  365. [ 3.736721] NET: Registered protocol family 10
  366. [ 3.744261] sit: IPv6 over IPv4 tunneling driver
  367. [ 3.749851] NET: Registered protocol family 17
  368. [ 3.754420] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  369. [ 3.767317] 8021q: 802.1Q VLAN Support v1.8
  370. [ 3.771842] ThumbEE CPU extension supported.
  371. [ 3.776194] Registering SWP/SWPB emulation handler
  372. [ 3.784310] Btrfs loaded
  373. [ 3.788686] rtc-mv f1010300.rtc: hctosys: unable to read the hardware clock
  374. [ 3.796799] ALSA device list:
  375. [ 3.799815] No soundcards found.
  376. [ 3.804279] Freeing unused kernel memory: 320K
  377. [ 3.848530] init: Console is alive
  378. [ 3.852169] init: - watchdog -
  379. [ 3.862004] ubi0: attaching mtd4
  380. [ 3.941851] ubi0: scanning is finished
  381. [ 3.953387] ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 2, need 40
  382. [ 3.964104] ubi0: attached mtd4 (name “config”, size 16 MiB)
  383. [ 3.969853] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
  384. [ 3.976804] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
  385. [ 3.983665] ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
  386. [ 3.990707] ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
  387. [ 3.996695] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
  388. [ 4.003983] ubi0: max/mean erase counter: 10/5, WL threshold: 4096, image sequence number: 0
  389. [ 4.012498] ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 2
  390. [ 4.021634] ubi0: background thread “ubi_bgt0d” started, PID 1263
  391. [ 4.031227] UBIFS (ubi0:0): background thread “ubifs_bgt0_0” started, PID 1267
  392. [ 4.106060] UBIFS (ubi0:0): recovery needed
  393. [ 4.256247] random: nonblocking pool is initialized
  394. [ 4.296625] UBIFS (ubi0:0): recovery completed
  395. [ 4.301225] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name “nand_config”
  396. [ 4.309137] UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
  397. [ 4.319124] UBIFS (ubi0:0): FS size: 12189696 bytes (11 MiB, 48 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
  398. [ 4.329539] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
  399. [ 4.335424] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID E6568663-40ED-4ECB-9C54-676145E882D9, small LPT model
  400. [ 4.352242] ubi1: attaching mtd5
  401. [ 4.583039] ubi1: scanning is finished
  402. [ 4.594746] ubi1 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 2, need 40
  403. [ 4.605459] ubi1: attached mtd5 (name “log”, size 48 MiB)
  404. [ 4.610945] ubi1: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
  405. [ 4.617896] ubi1: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
  406. [ 4.624756] ubi1: VID header offset: 4096 (aligned 4096), data offset: 8192
  407. [ 4.631798] ubi1: good PEBs: 192, bad PEBs: 0, corrupted PEBs: 0
  408. [ 4.637871] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
  409. [ 4.645157] ubi1: max/mean erase counter: 594/159, WL threshold: 4096, image sequence number: 0
  410. [ 4.653933] ubi1: available PEBs: 0, total reserved PEBs: 192, PEBs reserved for bad PEB handling: 2
  411. [ 4.663157] ubi1: background thread “ubi_bgt1d” started, PID 1271
  412. [ 4.676871] UBIFS (ubi1:0): background thread “ubifs_bgt1_0” started, PID 1275
  413. [ 4.761522] UBIFS (ubi1:0): recovery needed
  414. [ 4.976854] UBIFS (ubi1:0): recovery completed
  415. [ 4.981469] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name “nand_log”
  416. [ 4.989105] UBIFS (ubi1:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
  417. [ 4.999090] UBIFS (ubi1:0): FS size: 44695552 bytes (42 MiB, 176 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
  418. [ 5.009592] UBIFS (ubi1:0): reserved for root: 0 bytes (0 KiB)
  419. [ 5.015477] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID E6568663-40ED-4ECB-9C54-676145E882D9, small LPT model
  420. [ 5.044104] ubi2: attaching mtd6
  421. [ 6.186082] ubi2: scanning is finished
  422. [ 6.198550] ubi2 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 9, need 40
  423. [ 6.209528] ubi2: attached mtd6 (name “binary”, size 240 MiB)
  424. [ 6.215344] ubi2: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
  425. [ 6.222289] ubi2: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
  426. [ 6.229135] ubi2: VID header offset: 4096 (aligned 4096), data offset: 8192
  427. [ 6.236161] ubi2: good PEBs: 960, bad PEBs: 0, corrupted PEBs: 0
  428. [ 6.242220] ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
  429. [ 6.249508] ubi2: max/mean erase counter: 9/4, WL threshold: 4096, image sequence number: 0
  430. [ 6.257921] ubi2: available PEBs: 0, total reserved PEBs: 960, PEBs reserved for bad PEB handling: 9
  431. [ 6.267143] ubi2: background thread “ubi_bgt2d” started, PID 1285
  432. [ 6.280765] UBIFS (ubi2:0): background thread “ubifs_bgt2_0” started, PID 1289
  433. [ 6.357595] UBIFS (ubi2:0): recovery needed
  434. [ 6.541131] UBIFS (ubi2:0): recovery completed
  435. [ 6.545733] UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name “nand_binary”
  436. [ 6.553630] UBIFS (ubi2:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
  437. [ 6.563615] UBIFS (ubi2:0): FS size: 237953024 bytes (226 MiB, 937 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
  438. [ 6.574293] UBIFS (ubi2:0): reserved for root: 0 bytes (0 KiB)
  439. [ 6.580177] UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID CB112078-E0B6-40BD-A29D-E59258E5DC8C, small LPT model
  440. [ 6.597063] ubi3: attaching mtd7
  441. [ 7.130732] ubi3: scanning is finished
  442. [ 7.142664] ubi3 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 4, need 32
  443. [ 7.153421] ubi3: attached mtd7 (name “temp”, size 112 MiB)
  444. [ 7.159062] ubi3: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
  445. [ 7.166007] ubi3: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
  446. [ 7.172853] ubi3: VID header offset: 4096 (aligned 4096), data offset: 8192
  447. [ 7.179881] ubi3: good PEBs: 440, bad PEBs: 8, corrupted PEBs: 0
  448. [ 7.185941] ubi3: user volume: 1, internal volumes: 1, max. volumes count: 128
  449. [ 7.193230] ubi3: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 0
  450. [ 7.201643] ubi3: available PEBs: 0, total reserved PEBs: 440, PEBs reserved for bad PEB handling: 4
  451. [ 7.210863] ubi3: background thread “ubi_bgt3d” started, PID 1294
  452. [ 7.224480] UBIFS (ubi3:0): background thread “ubifs_bgt3_0” started, PID 1298
  453. [ 7.388386] UBIFS (ubi3:0): UBIFS: mounted UBI device 3, volume 0, name “nand_temp”
  454. [ 7.396138] UBIFS (ubi3:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
  455. [ 7.406125] UBIFS (ubi3:0): FS size: 107167744 bytes (102 MiB, 422 LEBs), journal size 9404416 bytes (8 MiB, 38 LEBs)
  456. [ 7.416802] UBIFS (ubi3:0): reserved for root: 0 bytes (0 KiB)
  457. [ 7.422687] UBIFS (ubi3:0): media format: w4/r0 (latest is w4/r0), UUID E6568663-40ED-4ECB-9C54-676145E882D9, small LPT model
  458. [ 7.576464] prepare overlay filesystem done
  459. [ 9.666376] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc1
  460. [ 9.673199] i2c i2c-0: new_device: Instantiated device s35390a at 0x30
  461. [ 16.030168] init: - preinit -
  462. [ 16.233692] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  463. Press the [f] key and hit [enter] to enter failsafe mode
  464. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  465. [ 18.236606] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  466. [ 18.244531] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  467. [ 19.348182] mount_root: mounting /dev/root
  468. [ 19.366048] urandom-seed: Seeding with /etc/urandom.seed
  469. [ 19.406975] procd: - early -
  470. [ 19.409989] procd: - watchdog -
  471. [ 20.137510] procd: - watchdog -
  472. [ 20.140922] procd: - ubus -
  473. [ 20.194500] procd: - init -
  474. Please press Enter to activate this console.
  475. [ 20.430356] kmodloader: loading kernel modules from /etc/modules.d/*
  476. [ 20.440492] ip6_tables: © 2000-2006 Netfilter Core Team
  477. [ 20.454815] ip_tables: © 2000-2006 Netfilter Core Team
  478. [ 20.461507] mvDmaDrv: loading out-of-tree module taints kernel.
  479. [ 20.467970] Got dynamic major for mvDmaDrv: 244
  480. [ 20.473868] Got dynamic major for mvIntDrv: 243
  481. [ 20.479399] Got dynamic major for mvMbusDrv: 242
  482. [ 20.487176] nf_conntrack version 0.5.0 (7947 buckets, 31788 max)
  483. [ 20.523539] xt_time: kernel timezone is -0000
  484. [ 20.533647] PPP generic driver version 2.4.2
  485. [ 20.538989] NET: Registered protocol family 24
  486. [ 20.545988] kmodloader: done loading kernel modules from /etc/modules.d/*
  487. [ 22.785668] br-lan: port 1(eth0) entered blocking state
  488. [ 22.791164] br-lan: port 1(eth0) entered disabled state
  489. [ 22.797047] device eth0 entered promiscuous mode
  490. [ 22.805177] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  491. [ 24.788604] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  492. [ 24.796539] br-lan: port 1(eth0) entered blocking state
  493. [ 24.801830] br-lan: port 1(eth0) entered forwarding state
  494. [ 24.807430] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  495. [ 29.772638] maintain log files
  496. [ 30.026493] 3.6M /usr/var
  497. [ 30.036316] 07/10/21 00:38:11 boot reason: software reset
  498. [ 30.280764] Config looks fine
  499. [ 31.125360] br-lan: port 1(eth0) entered disabled state
  500. [ 31.951793] start service completed
  501. [ 32.310771] mvDmaDrv_open(file=db15bf40) data=db749e00
  502. [ 32.316017] mvDmaDrv_mmap(file=db15bf40) data=db749e00
  503. [ 32.322535] dma_alloc_coherent() virt=e0f9b000 dma=0x1ce00000
  504. [ 32.328350] m->phys=0x1ce00000
  505. [ 32.331471] remap_pfn_range(phys=0x1ce00000 vm_start=0xb6d42000, vm_pgoff=0x1ce00, vm_size=0x200000, )
  506. [ 32.542129] remap_pfn_range(phys=0xf1000000, PAGE_SHIFT=c, 0xb6a00000, 0xf1000, 0x100000, 0x703)
  507. [ 32.551060] remap_pfn_range(phys=0xf8000000, PAGE_SHIFT=c, 0xb2a00000, 0xf8000, 0x4000000, 0x703)
  508. [ 32.561869] remap_pfn_range(phys=0xfc000000, PAGE_SHIFT=c, 0xb2900000, 0xfc000, 0x100000, 0x703)
  509. [ 70.832471] ISS gets ready
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!