OpenBSD dmesg

OpenBSD 6.1-current (GENERIC.MP) #0: Sun Aug  6 13:09:18 EEST 2017
    root@fugu.localhost:/home/master/vbx/sys/arch/amd64/compile/GENERIC.MP
real mem = 2130640896 (2031MB)
avail mem = 2059767808 (1964MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe1000 (10 entries)
bios0: vendor innotek GmbH version "VirtualBox" date 12/01/2006
bios0: innotek GmbH VirtualBox
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC HPET MCFG SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz, 2394.90 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2394896760 Hz
cpu0: smt 0, core 0, package 0
mtrr: CPU supports MTRRs but not enabled by BIOS
cpu0: apic clock running at 999MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz, 2394.80 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xdc000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
"PNP0303" at acpi0 not configured
"PNP0F03" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "1" serial 0 type VBOX oem "innotek"
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: GFX0
pci0 at mainbus0 bus 0
vga1 at pci0 dev 2 function 0 "InnoTek VirtualBox Graphics Adapter" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x02: apic 2 int 19, address 08:00:27:9a:1d:26
"InnoTek VirtualBox Guest Service" rev 0x00 at pci0 dev 4 function 0 not configured
auich0 at pci0 dev 5 function 0 "Intel 82801AA AC97" rev 0x01: apic 2 int 21, ICH
ac97: codec id 0x83847600 (SigmaTel STAC9700)
audio0 at auich0
piixpm0 at pci0 dev 7 function 0 "Intel 82371AB Power" rev 0x08: apic 2 int 23
iic0 at piixpm0
ppb0 at pci0 dev 24 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf2
pci1 at ppb0 bus 1
ppb1 at pci0 dev 25 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf2
pci2 at ppb1 bus 2
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <VBOX HARDDISK>
wd0: 128-sector PIO, LBA, 26100MB, 53452960 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <VBOX, CD-ROM, 1.0> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
ohci0 at pci0 dev 31 function 4 "Apple Intrepid USB" rev 0x00: apic 2 int 23, version 1.0
ehci0 at pci0 dev 31 function 5 "Intel 82801FB USB" rev 0x00: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00 addr 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (6f576e6c5219b9d7.a) swap on wd0b dump on wd0b