Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- #
- # Copyright (C) 2013-2018 The Android-x86 Open Source Project
- #
- # License: GNU Public License v2 or later
- #
- function set_property()
- {
- setprop "$1" "$2"
- [ -n "$DEBUG" ] && echo "$1"="$2" >> /dev/x86.prop
- }
- function set_prop_if_empty()
- {
- [ -z "$(getprop $1)" ] && set_property "$1" "$2"
- }
- function rmmod_if_exist()
- {
- for m in $*; do
- [ -d /sys/module/$m ] && rmmod $m
- done
- }
- function init_misc()
- {
- # a hack for USB modem
- lsusb | grep 1a8d:1000 && eject
- # in case no cpu governor driver autoloads
- [ -d /sys/devices/system/cpu/cpu0/cpufreq ] || modprobe acpi-cpufreq
- # enable sdcardfs/esdfs if /data is not mounted on tmpfs or 9p
- mount | grep /data\ | grep -qE 'tmpfs|9p'
- [ $? -eq 0 ] && SDCARDFS_DISABLE=${SDCARDFS_DISABLE:-1}
- # Allow force disable sdcardfs/esdfs
- if [ "$SDCARDFS_DISABLE" -ge 1 ]; then
- set_property external_storage.sdcardfs.enabled false
- fi
- # remove wl if it's not used
- local wifi
- if [ -d /sys/class/net/wlan0 ]; then
- wifi=$(basename `readlink /sys/class/net/wlan0/device/driver`)
- [ "$wifi" != "wl" ] && rmmod_if_exist wl
- fi
- # disable virt_wifi by default, only turn on when user set VIRT_WIFI=1
- local eth=`getprop net.virt_wifi eth0`
- if [ -d /sys/class/net/$eth -a "$VIRT_WIFI" -gt "0" ]; then
- if [ -n "$wifi" -a "$VIRT_WIFI" -ge "1" ]; then
- rmmod_if_exist iwlmvm $wifi
- fi
- if [ ! -d /sys/class/net/wlan0 ]; then
- ifconfig $eth down
- ip link set $eth name wifi_eth
- ifconfig wifi_eth up
- ip link add link wifi_eth name wlan0 type virt_wifi
- fi
- fi
- #Set CPU name into a property
- setprop ro.bliss.cpuname "$(grep "model name" /proc/cpuinfo | sort -u | cut -d : -f 2 | cut -c2-)"
- # Tell vold to use ntfs3 driver instead of ntfs-3g
- if [ "$USE_NTFS3" -ge "1" ] || [ "$VOLD_USE_NTFS3" -ge 1 ]; then
- set_property ro.vold.use_ntfs3 true
- fi
- }
- function init_hal_audio()
- {
- case "$PRODUCT" in
- VirtualBox*|Bochs*)
- [ -d /proc/asound/card0 ] || modprobe snd-sb16 isapnp=0 irq=5
- ;;
- TS10*)
- set_prop_if_empty hal.audio.out pcmC0D2p
- ;;
- esac
- case "$(ls /proc/asound)" in
- *sofhdadsp*)
- AUDIO_PRIMARY=x86_celadon
- ;;
- esac
- set_property ro.hardware.audio.primary ${AUDIO_PRIMARY:-x86}
- if [ "$BOARD" == "Jupiter" ] && [ "$VENDOR" == "Valve" ]
- then
- pcm_card=$(cat /proc/asound/cards | grep acp5x | awk '{print $1}')
- # headset microphone on d0, 32bit only
- set_property hal.audio.in.headset "pcmC${pcm_card}D0c"
- set_property hal.audio.in.headset.format 1
- # internal microphone on d0, 32bit only
- set_property hal.audio.in.mic "pcmC${pcm_card}D0c"
- set_property hal.audio.in.mic.format 1
- # headphone jack on d0, 32bit only
- set_property hal.audio.out.headphone "pcmC${pcm_card}D0p"
- set_property hal.audio.out.headphone.format 1
- # speaker on d1, 16bit only
- set_property hal.audio.out.speaker "pcmC${pcm_card}D1p"
- set_property hal.audio.out.speaker.format 0
- # enable hdmi audio on the 3rd output, but it really depends on how docks wire things
- # to make matters worse, jack detection on alsa does not seem to always work on my setup, so a dedicated hdmi hal might want to send data to all ports instead of just probing
- pcm_card=$(cat /proc/asound/cards | grep HDA-Intel | awk '{print $1}')
- set_property hal.audio.out.hdmi "pcmC${pcm_card}D8p"
- fi
- }
- function init_hal_brcm_wifi()
- {
- ## Function created by Chaozhuo's PhoenixOS
- ## Currently these devices are supported to use broadcom-wl driver
- # Broadcom BCM4313 (PCI ID 14e4:4727)
- # Broadcom BCM4321 (PCI IDs 14e4:4328, 14e4:4329, 14e4:432a)
- # Broadcom BCM4322 (PCI IDs 14e4:432b, 14e4:432d)
- # Broadcom BCM43142 (PCI ID 14e4:4365)
- # Broadcom BCM4352 (PCI ID 14e4:43b1)
- # Broadcom BCM4360 (PCI IDs 14e4:43a0, 14e4:4360)
- ## These devices are also on the list, but removed due to the fact that
- ## b43 or brcm80211 supports it.
- ## https://wireless.wiki.kernel.org/en/users/drivers/b43
- # Broadcom BCM4311 (PCI IDs 14e4:4311, 14e4:4312)
- # Broadcom BCM4312 (PCI ID 14e4:4315)
- # Broadcom BCM4322 (PCI IDs 14e4:432c)
- # Broadcom BCM43224 (PCI IDs 14e4:0576, 14e4:4353)
- # Broadcom BCM43225 (PCI ID 14e4:4357)
- # Broadcom BCM43227 (PCI ID 14e4:4358)
- # Broadcom BCM43228 (PCI ID 14e4:4359)
- # Broadcom BCM4331 (PCI ID 14e4:4331)
- BCMAID=`lspci | grep "14e4" | awk '{print $4}'`
- case "${BCMAID##*:}" in
- 4727 | \
- 4328 | 4329 | 432a | \
- 432b | 432d | \
- 4365 | \
- 43b1 | \
- 43a0 | 4360 )
- rmmod b43
- rmmod b44
- rmmod b43legacy
- rmmod ssb
- rmmod bcma
- rmmod brcm80211
- rmmod brcmsmac
- rmmod wl
- modprobe wl
- ;;
- *)
- ;;
- esac
- }
- function init_hal_audio_bootcomplete()
- {
- if [ -e "/data/vendor/asound.state" ]; then
- # Initialize once in case a new audio device is plugged in
- alsa_ctl init
- # Restore /data/vendor/asound.state if found
- alsa_ctl restore
- else
- # Initialize as usual
- # 1. Initialize the all the audio cards
- alsa_ctl init
- # 2. Restore alsa state for specific cards or turn on all of the
- # default controls & set value to max (usually for PCH)
- for c in $(grep '\[.*\]' /proc/asound/cards | awk '{print $1}'); do
- f=/system/etc/alsa/$(cat /proc/asound/card$c/id).state
- d=/data/vendor/alsa/$(cat /proc/asound/card$c/id).state
- if [ -e $f ]; then
- alsa_ctl -f $f restore $c
- elif [ -e $d ]; then
- alsa_ctl -f $d restore $c
- else
- alsa_amixer -c $c set Master on
- alsa_amixer -c $c set Master 100%
- alsa_amixer -c $c set Headphone on
- alsa_amixer -c $c set Headphone 100%
- alsa_amixer -c $c set Speaker on
- alsa_amixer -c $c set Speaker 100%
- alsa_amixer -c $c set Capture 80%
- alsa_amixer -c $c set Capture cap
- alsa_amixer -c $c set PCM 100% unmute
- alsa_amixer -c $c set SPO unmute
- alsa_amixer -c $c set IEC958 on
- alsa_amixer -c $c set 'Mic Boost' 1
- alsa_amixer -c $c set 'Internal Mic Boost' 1
- # 2.5. Set alsaucm HiFi verb & devices for specific hardware
- for d in $(grep '\[.*\]' /proc/asound/cards | awk '{print $4}'); do
- # Check if the card is rt5651, this card can not be able to
- # use both Speaker & Headphones at the same time. So we will enable
- # only Speaker for this card and tell users to turn Headphones on
- # manually if they want to use it.
- if [ "$(cat /proc/asound/cards | grep rt5651)" ]; then
- card_is_rt5651=true
- fi
- case $d in
- *bytcht*|*bytcr*|*cht-bsw*|*chtmax*|*chtrt*|*chtnau*)
- if [ "$card_is_rt5651" == true ]; then
- alsaucm -c $d set _verb HiFi \
- set _enadev Speaker \
- set _enadev Headset \
- set _enadev Mic
- else
- alsaucm -c $d set _verb HiFi \
- set _enadev Speaker \
- set _enadev Headphones \
- set _enadev Headset \
- set _enadev Mic
- fi
- ;;
- *SOF*)
- if [ "$(cat /proc/asound/cards | grep -E 'bytcht|bdw')" ]; then
- if [ "$card_is_rt5651" == true ]; then
- alsaucm -c $d set _verb HiFi \
- set _enadev Speaker \
- set _enadev Headset \
- set _enadev Mic
- else
- alsaucm -c $d set _verb HiFi \
- set _enadev Speaker \
- set _enadev Headphones \
- set _enadev Headset \
- set _enadev Mic
- fi
- fi
- ;;
- *acp5x*)
- alsaucm -c $d set _verb HiFi \
- set _enadev Speaker \
- set _enadev Headphones \
- set _enadev Headset \
- set _enadev Mic
- ;;
- esac
- done
- fi
- done
- # 3. Store everything into /data/vendor/asound.state
- alsa_ctl store
- fi
- }
- function init_hal_bluetooth()
- {
- for r in /sys/class/rfkill/*; do
- type=$(cat $r/type)
- [ "$type" = "wlan" -o "$type" = "bluetooth" ] && echo 1 > $r/state
- done
- case "$PRODUCT" in
- T100TAF)
- set_property bluetooth.interface hci1
- ;;
- T10*TA|M80TA|HP*Omni*)
- BTUART_PORT=/dev/ttyS1
- set_property hal.bluetooth.uart.proto bcm
- ;;
- MacBookPro8*)
- rmmod b43
- modprobe b43 btcoex=0
- modprobe btusb
- ;;
- # FIXME
- # Fix MacBook 2013-2015 (Air6/7&Pro11/12) BCM4360 ssb&wl conflict.
- MacBookPro11* | MacBookPro12* | MacBookAir6* | MacBookAir7*)
- rmmod b43
- rmmod ssb
- rmmod bcma
- rmmod wl
- modprobe wl
- modprobe btusb
- ;;
- *)
- for bt in $(toybox lsusb -v | awk ' /Class:.E0/ { print $9 } '); do
- chown 1002.1002 $bt && chmod 660 $bt
- done
- ;;
- esac
- if [ -n "$BTUART_PORT" ]; then
- set_property hal.bluetooth.uart $BTUART_PORT
- chown bluetooth.bluetooth $BTUART_PORT
- start btattach
- fi
- if [ "$BTLINUX_HAL" = "1" ]; then
- start btlinux-1.1
- else
- start vendor.bluetooth-1-1
- fi
- if [ "$BT_BLE_DISABLE" = "1" ]; then
- set_property bluetooth.core.le.disabled true
- set_property bluetooth.hci.disabled_commands 246
- fi
- if [ "$BT_BLE_NO_VENDORCAPS" = "1" ]; then
- set_property bluetooth.core.le.vendor_capabilities.enabled false
- set_property persist.sys.bt.max_vendor_cap 0
- fi
- }
- function init_hal_camera()
- {
- case "$UEVENT" in
- *e-tabPro*)
- set_prop_if_empty hal.camera.0 0,270
- set_prop_if_empty hal.camera.2 1,90
- ;;
- *LenovoideapadD330*)
- set_prop_if_empty hal.camera.0 0,90
- set_prop_if_empty hal.camera.2 1,90
- ;;
- *)
- ;;
- esac
- }
- function init_hal_gps()
- {
- # TODO
- return
- }
- function set_drm_mode()
- {
- case "$PRODUCT" in
- ET1602*)
- drm_mode=1366x768
- ;;
- *)
- [ -n "$video" ] && drm_mode=$video
- ;;
- esac
- [ -n "$drm_mode" ] && set_property debug.drm.mode.force $drm_mode
- }
- function init_uvesafb()
- {
- UVESA_MODE=${UVESA_MODE:-${video%@*}}
- case "$PRODUCT" in
- ET2002*)
- UVESA_MODE=${UVESA_MODE:-1600x900}
- ;;
- *)
- ;;
- esac
- modprobe uvesafb mode_option=${UVESA_MODE:-1024x768}-32 ${UVESA_OPTION:-mtrr=3 scroll=redraw} v86d=/system/bin/v86d
- }
- function init_hal_gralloc()
- {
- case "$(readlink /sys/class/graphics/fb0/device/driver)" in
- *virtio_gpu|*virtio-pci)
- HWC=${HWC:-drm_minigbm_celadon}
- GRALLOC=${GRALLOC:-minigbm_arcvm}
- #video=${video:-1280x768}
- ;&
- *nouveau)
- GRALLOC=${GRALLOC:-gbm_hack}
- HWC=${HWC:-drm_celadon}
- ;&
- *i915)
- if [ "$(cat /sys/kernel/debug/dri/0/i915_capabilities | grep -e 'gen' -e 'graphics version' | awk '{print $NF}')" -gt 9 ]; then
- HWC=${HWC:-drm_minigbm_celadon}
- GRALLOC=${GRALLOC:-minigbm}
- fi
- ;&
- *amdgpu)
- HWC=${HWC:-drm_minigbm_celadon}
- GRALLOC=${GRALLOC:-minigbm}
- ;&
- *radeon|*vmwgfx*)
- if [ "$HWACCEL" != "0" ]; then
- ${HWC:+set_property ro.hardware.hwcomposer $HWC}
- set_property ro.hardware.gralloc ${GRALLOC:-gbm}
- set_drm_mode
- fi
- ;;
- "")
- init_uvesafb
- ;&
- *)
- export HWACCEL=0
- ;;
- esac
- if [ "$GRALLOC4_MINIGBM" = "1" ]; then
- set_property debug.ui.default_mapper 4
- set_property debug.ui.default_gralloc 4
- case "$GRALLOC" in
- minigbm)
- start vendor.graphics.allocator-4-0
- ;;
- minigbm_arcvm)
- start vendor.graphics.allocator-4-0-arcvm
- ;;
- minigbm_gbm_mesa)
- start vendor.graphics.allocator-4-0-gbm_mesa
- ;;
- *)
- ;;
- esac
- else
- set_property debug.ui.default_mapper 2
- set_property debug.ui.default_gralloc 2
- start vendor.gralloc-2-0
- fi
- [ -n "$DEBUG" ] && set_property debug.egl.trace error
- }
- function init_egl()
- {
- if [ "$HWACCEL" != "0" ]; then
- if [ "$ANGLE" == "1" ]; then
- set_property ro.hardware.egl angle
- else
- set_property ro.hardware.egl mesa
- fi
- else
- if [ "$ANGLE" == "1" ]; then
- set_property ro.hardware.egl angle
- else
- set_property ro.hardware.egl swiftshader
- fi
- set_property ro.hardware.vulkan pastel
- start vendor.hwcomposer-2-1
- fi
- # Set OpenGLES version
- case "$FORCE_GLES" in
- *3.0*)
- set_property ro.opengles.version 196608
- export MESA_GLES_VERSION_OVERRIDE=3.0
- ;;
- *3.1*)
- set_property ro.opengles.version 196609
- export MESA_GLES_VERSION_OVERRIDE=3.1
- ;;
- *3.2*)
- set_property ro.opengles.version 196610
- export MESA_GLES_VERSION_OVERRIDE=3.2
- ;;
- *)
- set_property ro.opengles.version 196608
- ;;
- esac
- # Set RenderEngine backend
- if [ -z ${FORCE_RENDERENGINE+x} ]; then
- set_property debug.renderengine.backend threaded
- else
- set_property debug.renderengine.backend $FORCE_RENDERENGINE
- fi
- # Set default GPU render
- if [ -z ${GPU_OVERRIDE+x} ]; then
- echo ""
- else
- set_property gralloc.gbm.device /dev/dri/$GPU_OVERRIDE
- set_property vendor.hwc.drm.device /dev/dri/$GPU_OVERRIDE
- set_property hwc.drm.device /dev/dri/$GPU_OVERRIDE
- fi
- }
- function init_hal_hwcomposer()
- {
- # TODO
- if [ "$HWACCEL" != "0" ]; then
- if [ "$HWC" = "default" ]; then
- if [ "$HWC_IS_DRMFB" = "1" ]; then
- set_property debug.sf.hwc_service_name drmfb
- start vendor.hwcomposer-2-1.drmfb
- else
- set_property debug.sf.hwc_service_name default
- start vendor.hwcomposer-2-1
- fi
- else
- set_property debug.sf.hwc_service_name default
- start vendor.hwcomposer-2-4
- if [[ "$HWC" == "drm_celadon" || "$HWC" == "drm_minigbm_celadon" ]]; then
- set_property vendor.hwcomposer.planes.enabling $MULTI_PLANE
- set_property vendor.hwcomposer.planes.num $MULTI_PLANE_NUM
- set_property vendor.hwcomposer.preferred.mode.limit $HWC_PREFER_MODE
- set_property vendor.hwcomposer.connector.id $CONNECTOR_ID
- set_property vendor.hwcomposer.mode.id $MODE_ID
- set_property vendor.hwcomposer.connector.multi_refresh_rate $MULTI_REFRESH_RATE
- fi
- fi
- fi
- }
- function init_hal_media()
- {
- # Check if we want to use codec2
- if [ -z ${CODEC2_LEVEL+x} ]; then
- echo ""
- else
- set_property debug.stagefright.ccodec $CODEC2_LEVEL
- fi
- # Disable YUV420 planar on OMX codecs
- if [ "$OMX_NO_YUV420" -ge "1" ]; then
- set_property ro.yuv420.disable true
- else
- set_property ro.yuv420.disable false
- fi
- if [ "$BOARD" == "Jupiter" ] && [ "$VENDOR" == "Valve" ]
- then
- FFMPEG_CODEC2_PREFER=${FFMPEG_CODEC2_PREFER:-1}
- fi
- #FFMPEG Codec Setup
- ## Turn on/off FFMPEG OMX by default
- if [ "$FFMPEG_OMX_CODEC" -ge "1" ]; then
- set_property media.sf.omx-plugin libffmpeg_omx.so
- set_property media.sf.extractor-plugin libffmpeg_extractor.so
- else
- set_property media.sf.omx-plugin ""
- set_property media.sf.extractor-plugin ""
- fi
- ## Enable logging
- if [ "$FFMPEG_CODEC_LOG" -ge "1" ]; then
- set_property debug.ffmpeg.loglevel verbose
- fi
- ## Disable HWAccel (currently only VA-API) and use software rendering
- if [ "$FFMPEG_HWACCEL_DISABLE" -ge "1" ]; then
- set_property media.sf.hwaccel 0
- else
- set_property media.sf.hwaccel 1
- fi
- ## Put c2.ffmpeg to the highest rank amongst the media codecs
- if [ "$FFMPEG_CODEC2_PREFER" -ge "1" ]; then
- set_property debug.ffmpeg-codec2.rank 0
- else
- set_property debug.ffmpeg-codec2.rank 4294967295
- fi
- ## FFMPEG deinterlace, we will put both software mode and VA-API one here
- if [ -z "${FFMPEG_CODEC2_DEINTERLACE+x}" ]; then
- echo ""
- else
- set_property debug.ffmpeg-codec2.deinterlace $FFMPEG_CODEC2_DEINTERLACE
- fi
- if [ -z "${FFMPEG_CODEC2_DEINTERLACE_VAAPI+x}" ]; then
- echo ""
- else
- set_property debug.ffmpeg-codec2.deinterlace.vaapi $FFMPEG_CODEC2_DEINTERLACE_VAAPI
- fi
- ## Handle DRM prime on ffmpeg codecs, we will disable by default due to
- ## the fact that it doesn't work with gbm_gralloc yet
- if [ "$FFMPEG_CODEC2_DRM" -ge "1" ]; then
- set_property debug.ffmpeg-codec2.hwaccel.drm 1
- else
- set_property debug.ffmpeg-codec2.hwaccel.drm 0
- fi
- }
- function init_hal_vulkan()
- {
- case "$(readlink /sys/class/graphics/fb0/device/driver)" in
- *i915)
- if [ "$(cat /sys/kernel/debug/dri/0/i915_capabilities | grep -e 'gen' -e 'graphics version' | awk '{print $NF}')" -lt 9 ]; then
- set_property ro.hardware.vulkan intel_hasvk
- else
- set_property ro.hardware.vulkan intel
- fi
- ;;
- *amdgpu)
- set_property ro.hardware.vulkan radeon
- ;;
- *virtio_gpu|*virtio-pci)
- set_property ro.hardware.vulkan virtio
- ;;
- *)
- set_property ro.hardware.vulkan pastel
- ;;
- esac
- }
- function init_hal_lights()
- {
- chown 1000.1000 /sys/class/backlight/*/brightness
- }
- function init_hal_power()
- {
- for p in /sys/class/rtc/*; do
- echo disabled > $p/device/power/wakeup
- done
- # TODO
- case "$PRODUCT" in
- HP*Omni*|OEMB|Standard*PC*|Surface*3|T10*TA|VMware*)
- SLEEP_STATE=none
- ;;
- e-tab*Pro)
- SLEEP_STATE=force
- ;;
- *)
- ;;
- esac
- set_property sleep.state ${SLEEP_STATE}
- }
- function init_hal_thermal()
- {
- #thermal-daemon test, pulled from Project Celadon
- case "$(cat /sys/class/dmi/id/chassis_vendor | head -1)" in
- QEMU)
- setprop vendor.thermal.enable 0
- ;;
- *)
- setprop vendor.thermal.enable 1
- ;;
- esac
- }
- function init_hal_sensors()
- {
- if [ "$SENSORS_FORCE_KBDSENSOR" == "1" ]; then
- # Option to force kbd sensor
- hal_sensors=kbd
- has_sensors=true
- else
- # if we have sensor module for our hardware, use it
- ro_hardware=$(getprop ro.hardware)
- [ -f /system/lib/hw/sensors.${ro_hardware}.so ] && return 0
- local hal_sensors=kbd
- local has_sensors=true
- case "$UEVENT" in
- *MS-N0E1*)
- set_property ro.ignore_atkbd 1
- set_property poweroff.doubleclick 0
- setkeycodes 0xa5 125
- setkeycodes 0xa7 1
- setkeycodes 0xe3 142
- ;;
- *Aspire1*25*)
- modprobe lis3lv02d_i2c
- echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
- ;;
- *Aspire*SW5-012*|*Venue*8*Pro*3845*|*ST70416-6*|*Akoya*P2213T*)
- set_property ro.iio.accel.order 102
- ;;
- *LenovoideapadD330*)
- set_property ro.iio.accel.order 102
- set_property ro.ignore_atkbd 1
- ;&
- *LINX1010B*)
- set_property ro.iio.accel.x.opt_scale -1
- set_property ro.iio.accel.z.opt_scale -1
- ;;
- *i7Stylus*)
- set_property ro.iio.accel.x.opt_scale -1
- ;;
- *LenovoMIIX320*|*MIIX510*|*MIIX300-10IBY*|*ONDATablet*| \
- *TECLAST*X4*|*SF133AYR110*|*SolTIVW*)
- set_property ro.iio.accel.order 102
- set_property ro.iio.accel.x.opt_scale -1
- set_property ro.iio.accel.y.opt_scale -1
- ;;
- *Hi10*plus*|*T*0*TA*|*M80TA*|*TECLAST*X16*)
- set_property ro.iio.accel.y.opt_scale -1
- ;;
- *TAIFAElimuTab*)
- set_property ro.ignore_atkbd 1
- set_property ro.iio.accel.quirks no-trig
- set_property ro.iio.accel.order 102
- ;;
- *SwitchSA5-271*|*SwitchSA5-271P*)
- set_property ro.ignore_atkbd 1
- has_sensors=true
- hal_sensors=iio
- ;&
- *)
- has_sensors=false
- ;;
- esac
- # has iio sensor-hub?
- if [ -n "`ls /sys/bus/iio/devices/iio:device* 2> /dev/null`" ]; then
- toybox chown -R 1000.1000 /sys/bus/iio/devices/iio:device*/
- [ -n "`ls /sys/bus/iio/devices/iio:device*/in_accel_x_raw 2> /dev/null`" ] && has_sensors=true
- hal_sensors=iio
- elif [ "$hal_sensors" != "kbd" ] | [ hal_sensors=iio ]; then
- has_sensors=true
- fi
- # is steam deck?
- if [ "$BOARD" == "Jupiter" ] && [ "$VENDOR" == "Valve" ]
- then
- set_property poweroff.disable_virtual_power_button 1
- hal_sensors=jupiter
- has_sensors=true
- fi
- fi
- set_property ro.iio.accel.quirks "no-trig,no-event"
- set_property ro.iio.anglvel.quirks "no-trig,no-event"
- set_property ro.iio.magn.quirks "no-trig,no-event"
- set_property ro.hardware.sensors $hal_sensors
- set_property config.override_forced_orient ${HAS_SENSORS:-$has_sensors}
- }
- function init_hal_surface()
- {
- case "$UEVENT" in
- *Surface*Pro*[4-9]*|*Surface*Book*|*Surface*Laptop*[1~4]*|*Surface*Laptop*Studio*)
- start iptsd_runner
- ;;
- esac
- }
- function create_pointercal()
- {
- if [ ! -e /data/misc/tscal/pointercal ]; then
- mkdir -p /data/misc/tscal
- touch /data/misc/tscal/pointercal
- chown 1000.1000 /data/misc/tscal /data/misc/tscal/*
- chmod 775 /data/misc/tscal
- chmod 664 /data/misc/tscal/pointercal
- fi
- # setprop to tell the system to turn on TSCalibrartion
- set_property ro.tscal.enable true
- }
- function init_tscal()
- {
- if [ "$FORCE_TSCAL" -ge "1" ]; then
- create_pointercal
- else
- case "$UEVENT" in
- *T91*|*T101*|*ET2002*|*74499FU*|*945GSE-ITE8712*|*CF-19[CDYFGKLP]*|*TECLAST:rntPAD*)
- create_pointercal
- return
- ;;
- *)
- ;;
- esac
- for usbts in $(lsusb | awk '{ print $6 }'); do
- case "$usbts" in
- 0596:0001|0eef:0001|14e1:6000|14e1:5000)
- create_pointercal
- return
- ;;
- *)
- ;;
- esac
- done
- fi
- }
- function init_ril()
- {
- case "$UEVENT" in
- *TEGA*|*2010:svnIntel:*|*Lucid-MWE*)
- set_property rild.libpath /system/lib/libhuaweigeneric-ril.so
- set_property rild.libargs "-d /dev/ttyUSB2 -v /dev/ttyUSB1"
- set_property ro.radio.noril no
- ;;
- *)
- set_property ro.radio.noril yes
- ;;
- esac
- }
- function init_cpu_governor()
- {
- governor=$(getprop cpu.governor)
- [ $governor ] && {
- for cpu in $(ls -d /sys/devices/system/cpu/cpu?); do
- echo $governor > $cpu/cpufreq/scaling_governor || return 1
- done
- }
- }
- function set_lowmem()
- {
- # 512 MB size in kB : https://source.android.com/devices/tech/perf/low-ram
- SIZE_512MB=2048000
- mem_size=`cat /proc/meminfo | grep MemTotal | tr -s ' ' | cut -d ' ' -f 2`
- if [ "$mem_size" -le "$SIZE_512MB" ]
- then
- setprop ro.config.low_ram true
- else
- setprop ro.config.low_ram false
- fi
- }
- function set_custom_ota()
- {
- for c in `cat /proc/cmdline`; do
- case $c in
- *=*)
- eval $c
- if [ -z "$1" ]; then
- case $c in
- # Set TimeZone
- SET_CUSTOM_OTA_URI=*)
- setprop bliss.updater.uri "$SET_CUSTOM_OTA_URI"
- ;;
- esac
- fi
- ;;
- esac
- done
- }
- function init_loop_links()
- {
- mkdir -p /dev/block/by-name
- for part in kernel initrd system; do
- for suffix in _a _b; do
- loop_device=$(losetup -a | grep "$part$suffix" | cut -d ":" -f1)
- if [ ! -z "$loop_device" ]; then
- ln -s $loop_device /dev/block/by-name/$part$suffix
- fi
- done
- done
- loop_device=$(losetup -a | grep misc | cut -d ":" -f1)
- ln -s $loop_device /dev/block/by-name/misc
- ln -s /dev/block/by-name/kernel_a /dev/block/by-name/boot_a
- ln -s /dev/block/by-name/kernel_b /dev/block/by-name/boot_b
- }
- function init_prepare_ota()
- {
- # If there's slot set, turn on bootctrl
- # If not, disable the OTA app (in bootcomplete)
- if [ "$(getprop ro.boot.slot_suffix)" ]; then
- start vendor.boot-hal-1-1
- fi
- }
- function set_custom_timezone()
- {
- for c in `cat /proc/cmdline`; do
- case $c in
- *=*)
- eval $c
- if [ -z "$1" ]; then
- case $c in
- # Set TimeZone
- SET_TZ_LOCATION=*)
- settings put global time_zone "$SET_TZ_LOCATION"
- setprop persist.sys.timezone "$SET_TZ_LOCATION"
- ;;
- esac
- fi
- ;;
- esac
- done
- }
- function do_init()
- {
- init_misc
- set_lowmem
- set_custom_timezone
- init_hal_audio
- set_custom_ota
- init_hal_brcm_wifi
- init_hal_bluetooth
- init_hal_camera
- init_hal_gps
- init_hal_gralloc
- init_hal_hwcomposer
- init_hal_media
- init_hal_vulkan
- init_hal_lights
- init_hal_power
- init_hal_thermal
- init_hal_sensors
- init_hal_surface
- init_tscal
- init_ril
- init_loop_links
- init_prepare_ota
- post_init
- }
- function do_netconsole()
- {
- modprobe netconsole netconsole="@/,@$(getprop dhcp.eth0.gateway)/"
- }
- function do_bootcomplete()
- {
- hciconfig | grep -q hci || pm disable com.android.bluetooth
- init_cpu_governor
- [ -z "$(getprop persist.sys.root_access)" ] && setprop persist.sys.root_access 3
- lsmod | grep -Ehq "brcmfmac|rtl8723be" && setprop wlan.no-unload-driver 1
- case "$PRODUCT" in
- Surface*Go)
- echo on > /sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/power/control
- ;;
- VMware*)
- pm disable com.android.bluetooth
- ;;
- X80*Power)
- set_property power.nonboot-cpu-off 1
- ;;
- *)
- ;;
- esac
- # initialize audio in bootcomplete
- init_hal_audio_bootcomplete
- # Turn off TSCalibration if property isn't set
- if [ "$(getprop ro.tscal.enable)" == "true" ]; then
- pm enable org.zeroxlab.util.tscal
- else
- pm disable org.zeroxlab.util.tscal
- fi
- # check wifi setup
- FILE_CHECK=/data/misc/wifi/wpa_supplicant.conf
- if [ ! -f "$FILE_CHECK" ]; then
- cp -a /system/etc/wifi/wpa_supplicant.conf $FILE_CHECK
- chown 1010.1010 $FILE_CHECK
- chmod 660 $FILE_CHECK
- fi
- POST_INST=/data/vendor/post_inst_complete
- USER_APPS=/system/etc/user_app/*
- BUILD_DATETIME=$(getprop ro.build.date.utc)
- POST_INST_NUM=$(cat $POST_INST)
- if [ ! "$BUILD_DATETIME" == "$POST_INST_NUM" ]; then
- for apk in $USER_APPS
- do
- pm install $apk
- done
- rm "$POST_INST"
- touch "$POST_INST"
- echo $BUILD_DATETIME > "$POST_INST"
- fi
- #Auto activate XtMapper
- #nohup env LD_LIBRARY_PATH=$(echo /data/app/*/xtr.keymapper*/lib/x86_64) \
- #CLASSPATH=$(echo /data/app/*/xtr.keymapper*/base.apk) /system/bin/app_process \
- #/system/bin xtr.keymapper.server.InputService > /dev/null 2>&1 &
- if [ ! "$(getprop ro.boot.slot_suffix)" ]; then
- pm disable org.lineageos.updater
- fi
- post_bootcomplete
- }
- PATH=/sbin:/system/bin:/system/xbin
- DMIPATH=/sys/class/dmi/id
- BOARD=$(cat $DMIPATH/board_name)
- PRODUCT=$(cat $DMIPATH/product_name)
- VENDOR=$(cat $DMIPATH/sys_vendor)
- UEVENT=$(cat $DMIPATH/uevent)
- # import cmdline variables
- for c in `cat /proc/cmdline`; do
- case $c in
- BOOT_IMAGE=*|iso-scan/*|*.*=*)
- ;;
- nomodeset)
- HWACCEL=0
- ;;
- *=*)
- eval $c
- if [ -z "$1" ]; then
- case $c in
- DEBUG=*)
- [ -n "$DEBUG" ] && set_property debug.logcat 1
- [ "$DEBUG" = "0" ] || SETUPWIZARD=${SETUPWIZARD:-0}
- ;;
- DPI=*)
- set_property ro.sf.lcd_density "$DPI"
- ;;
- SET_SF_ROTATION=*)
- set_property ro.sf.hwrotation "$SET_SF_ROTATION"
- ;;
- SET_OVERRIDE_FORCED_ORIENT=*)
- set_property config.override_forced_orient "$SET_OVERRIDE_FORCED_ORIENT"
- ;;
- SET_SYS_APP_ROTATION=*)
- # property: persist.sys.app.rotation has three cases:
- # 1.force_land: always show with landscape, if a portrait apk, system will scale up it
- # 2.middle_port: if a portrait apk, will show in the middle of the screen, left and right will show black
- # 3.original: original orientation, if a portrait apk, will rotate 270 degree
- set_property persist.sys.app.rotation "$SET_SYS_APP_ROTATION"
- ;;
- # Battery Stats
- SET_FAKE_BATTERY_LEVEL=*)
- # Let us fake the total battery percentage
- # Range: 0-100
- dumpsys battery set level "$SET_FAKE_BATTERY_LEVEL"
- ;;
- SET_FAKE_CHARGING_STATUS=*)
- # Allow forcing battery charging status
- # Off: 0 On: 1
- dumpsys battery set ac "$SET_FAKE_CHARGING_STATUS"
- ;;
- FORCE_DISABLE_NAVIGATION=*)
- # Force disable navigation bar
- # options: true, false
- set_property persist.bliss.disable_navigation_bar "$FORCE_DISABLE_NAVIGATION"
- ;;
- FORCE_DISABLE_NAV_HANDLE=*)
- # Force disable navigation handle
- # options: true, false
- set_property persist.bliss.disable_navigation_handle "$FORCE_DISABLE_NAV_HANDLE"
- ;;
- FORCE_DISABLE_NAV_TASKBAR=*)
- # Force disable navigation taskbar
- # options: true, false
- set_property persist.bliss.disable_taskbar "$FORCE_DISABLE_NAV_TASKBAR"
- ;;
- FORCE_DISABLE_STATUSBAR=*)
- # Force disable statusbar
- # options: true, false
- set_property persist.bliss.disable_statusbar "$FORCE_DISABLE_STATUSBAR"
- ;;
- FORCE_DISABLE_RECENTS=*)
- # Force disable recents
- # options: true, false
- set_property persist.bliss.disable_recents "$FORCE_DISABLE_RECENTS"
- ;;
- esac
- [ "$SETUPWIZARD" = "0" ] && set_property ro.setupwizard.mode DISABLED
- fi
- ;;
- esac
- done
- [ -n "$DEBUG" ] && set -x || exec &> /dev/null
- # import the vendor specific script
- hw_sh=/vendor/etc/init.sh
- [ -e $hw_sh ] && source $hw_sh
- case "$1" in
- eglsetup)
- init_egl
- ;;
- netconsole)
- [ -n "$DEBUG" ] && do_netconsole
- ;;
- bootcomplete)
- do_bootcomplete
- ;;
- init|"")
- do_init
- ;;
- esac
- return 0
Advertisement
Add Comment
Please, Sign In to add comment