API tools faq
paste
bskumar7080

rtnet.log

bskumar7080
Dec 24th, 2011
50
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.73 KB | None | 0 0
raw download clone embed print report
  1. Linux version 2.6.37.6-ipipe (root@sivakumar-desktop) (gcc version 4.3.2 (Sourcery G++ Lite 2008q3-72) ) #5 Fri Dec 16 18:48:47 IST 2011
  2. CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
  3. CPU: VIVT data cache, VIVT instruction cache
  4. Machine: MINI2440
  5. Memory policy: ECC disabled, Data cache writeback
  6. CPU S3C2440A (id 0x32440001)
  7. S3C24XX Clocks, Copyright 2004 Simtec Electronics
  8. S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
  9. CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
  10. On node 0 totalpages: 16384
  11. free_area_init_node: node 0, pgdat c04613d0, node_mem_map c04d2000
  12. Normal zone: 128 pages used for memmap
  13. Normal zone: 0 pages reserved
  14. Normal zone: 16256 pages, LIFO batch:3
  15. pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  16. pcpu-alloc: [0] 0
  17. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  18. Kernel command line: console=ttySAC0,115200n8 root=/dev/mmcblk0p2 mini2440=3tb rootdelay=3
  19. PID hash table entries: 256 (order: -2, 1024 bytes)
  20. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  21. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  22. Memory: 64MB = 64MB total
  23. Memory: 60000k/60000k available, 5536k reserved, 0K highmem
  24. Virtual kernel memory layout:
  25. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  26. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  27. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  28. vmalloc : 0xc4800000 - 0xf6000000 ( 792 MB)
  29. lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
  30. modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  31. .init : 0xc0008000 - 0xc002a000 ( 136 kB)
  32. .text : 0xc002a000 - 0xc043a6b4 (4162 kB)
  33. .data : 0xc043c000 - 0xc0461a60 ( 151 kB)
  34. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  35. NR_IRQS:85
  36. irq: clearing pending status 02000000
  37. irq: clearing subpending status 00000002
  38. I-pipe, 8.437 MHz clocksource
  39. timer tcon=00500000, tcnt a4ca, tcfg 00000200,00000000, usec 00001e57
  40. I-pipe 1.18-03: pipeline enabled.
  41. Console: colour dummy device 80x30
  42. console [ttySAC0] enabled
  43. Calibrating delay loop... 201.93 BogoMIPS (lpj=504832)
  44. pid_max: default: 32768 minimum: 301
  45. Mount-cache hash table entries: 512
  46. CPU: Testing write buffer coherency: ok
  47. gpiochip_add: gpios 288..303 (GPIOK) failed to register
  48. gpiochip_add: gpios 320..334 (GPIOL) failed to register
  49. gpiochip_add: gpios 352..353 (GPIOM) failed to register
  50. NET: Registered protocol family 16
  51. MINI2440: Option string mini2440=3tb
  52. MINI2440: '3' out of range LCD mode
  53. MINI2440: 't' ignored, touchscreen not compiled in
  54. S3C2440: Initialising architecture
  55. S3C2440: IRQ Support
  56. S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics
  57. DMA channel 0 at c4808000, irq 33
  58. DMA channel 1 at c4808040, irq 34
  59. DMA channel 2 at c4808080, irq 35
  60. DMA channel 3 at c48080c0, irq 36
  61. S3C244X: Clock Support, DVS off
  62. bio: create slab <bio-0> at 0
  63. usbcore: registered new interface driver usbfs
  64. usbcore: registered new interface driver hub
  65. usbcore: registered new device driver usb
  66. s3c-i2c s3c2440-i2c: slave address 0x10
  67. s3c-i2c s3c2440-i2c: bus frequency set to 98 KHz
  68. s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
  69. Advanced Linux Sound Architecture Driver Version 1.0.23.
  70. NET: Registered protocol family 2
  71. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  72. TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  73. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  74. TCP: Hash tables configured (established 2048 bind 2048)
  75. TCP reno registered
  76. UDP hash table entries: 256 (order: 0, 4096 bytes)
  77. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  78. NET: Registered protocol family 1
  79. RPC: Registered udp transport module.
  80. RPC: Registered tcp transport module.
  81. RPC: Registered tcp NFSv4.1 backchannel transport module.
  82. I-pipe: Domain Xenomai registered.
  83. Xenomai: hal/arm started.
  84. Xenomai: scheduling class idle registered.
  85. Xenomai: scheduling class rt registered.
  86. Xenomai: real-time nucleus v2.6.0-rc4 (head) loaded.
  87. Xenomai: starting native API services.
  88. Xenomai: starting POSIX services.
  89. Xenomai: starting RTDM services.
  90. JFFS2 version 2.2. (NAND) \0xc2\0xa9 2001-2006 Red Hat, Inc.
  91. ROMFS MTD (C) 2007 Red Hat, Inc.
  92. msgmni has been set to 117
  93. io scheduler noop registered
  94. io scheduler deadline registered
  95. io scheduler cfq registered (default)
  96. s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
  97. s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
  98. s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
  99. brd: module loaded
  100. at24 0-0050: 1024 byte 24c08 EEPROM (writable)
  101. S3C24XX NAND Driver, (c) 2004 Simtec Electronics
  102. s3c24xx-nand s3c2440-nand: Tacls=1, 9ns Twrph0=3 29ns, Twrph1=2 19ns
  103. s3c24xx-nand s3c2440-nand: NAND soft ECC
  104. NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung )
  105. Creating 4 MTD partitions on "nand":
  106. 0x000000000000-0x000000040000 : "u-boot"
  107. ftl_cs: FTL header not found.
  108. 0x000000040000-0x000000060000 : "u-boot-env"
  109. ftl_cs: FTL header not found.
  110. 0x000000060000-0x000000560000 : "kernel"
  111. ftl_cs: FTL header not found.
  112. 0x000000560000-0x000008000000 : "root"
  113. ftl_cs: FTL header not found.
  114. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  115. s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
  116. s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
  117. s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
  118. hub 1-0:1.0: USB hub found
  119. hub 1-0:1.0: 2 ports detected
  120. usbcore: registered new interface driver libusual
  121. s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes
  122. mice: PS/2 mouse device common for all mice
  123. input: gpio-keys as /devices/platform/gpio-keys/input/input0
  124. S3C24XX RTC, (c) 2004,2006 Simtec Electronics
  125. s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
  126. s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
  127. s3c-rtc s3c2410-rtc: warning: invalid RTC value so initializing it
  128. i2c /dev entries driver
  129. S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
  130. s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
  131. cpuidle: using governor ladder
  132. sdhci: Secure Digital Host Controller Interface driver
  133. sdhci: Copyright(c) Pierre Ossman
  134. s3c-sdi s3c2440-sdi: powered down.
  135. s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ
  136. s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz).
  137. Registered led device: led1
  138. Registered led device: led2
  139. Registered led device: led3
  140. s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
  141. Registered led device: led4
  142. Registered led device: backlight
  143. s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
  144. s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
  145. s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
  146. s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
  147. s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
  148. usbcore: registered new interface driver usbhid
  149. usbhid: USB HID core driver
  150. s3c-sdi s3c2440-sdi: running at 398kHz (requested: 400kHz).
  151. ALSA device list:
  152. No soundcards found.
  153. TCP cubic registered
  154. NET: Registered protocol family 17
  155. Registering the dns_resolver key type
  156. s3c-sdi s3c2440-sdi: running at 16875kHz (requested: 25000kHz).
  157. s3c-sdi s3c2440-sdi: running at 16875kHz (requested: 25000kHz).
  158. mmc0: new SD card at address 0002
  159. mmcblk0: mmc0:0002 00000 1.86 GiB
  160. s3c-rtc s3c2410-rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  161. Waiting 3sec before mounting root device...
  162. mmcblk0: p1 p2
  163. EXT3-fs: barriers not enabled
  164. kjournald starting. Commit interval 5 seconds
  165. EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended
  166. EXT3-fs (mmcblk0p2): using internal journal
  167. EXT3-fs (mmcblk0p2): recovery complete
  168. EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  169. VFS: Mounted root (ext3 filesystem) on device 179:2.
  170. Freeing init memory: 136K
  171.  
  172. *** RTnet 0.9.12 - built on Dec 24 2011 12:14:27 ***
  173.  
  174. RTnet: initialising real-time networking
  175. initializing loopback...
  176. RTnet: registered rtlo
  177. RTcfg: init real-time configuration distribution protocol
  178. RTmac: init realtime media access control
  179. RTmac/TDMA: init time division multiple access control mechanism
  180. dm9000 Real Time Ethernet Driver, V0.2
  181. RTnet: registered rteth0
  182. rteth0: dm9000e at c4bc6300,c4bca304 IRQ 51 MAC: 08:08:11:18:12:27 (chip)
  183.  
  184. sivakumar-desktop:/usr/local/rtnet/modules# lsmod
  185. Module Size Used by
  186. rttcp 18124 0
  187. rt_dm9000 6377 0
  188. tdma 15887 0
  189. rtmac 6843 1 tdma
  190. rtcfg 44593 0
  191. rt_loopback 1307 1
  192. rtpacket 4061 0
  193. rtudp 7194 0
  194. rt_eepro100 8800 0
  195. rtipv4 20643 3 rttcp,rtcfg,rtudp
  196. rtnet 26562 10 rttcp,rt_dm9000,tdma,rtmac,rtcfg,rt_loopback,rtpacket,rtudp,rt_eepro100,rtipv4
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!