API tools faq
paste
nareshkamboju

boot failed

nareshkamboju
Nov 2nd, 2016
125
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 51.19 KB | None | 0 0
raw download clone embed print report
  1. ARM V2M-Juno Boot loader v1.0.0
  2. HBI0262 build 1844
  3.  
  4. ARM V2M_Juno Firmware v1.4.3
  5. Build Date: Apr 12 2016
  6.  
  7. Time : 10:26:15
  8. Date : 02:11:2016
  9.  
  10. Press Enter to stop auto boot...
  11.  
  12.  
  13.  
  14. Cmd> flash
  15.  
  16. Switching on main power...
  17. PMIC RAM configuration (pms_v103.bin)...
  18. IOFPGA config: PASSED
  19.  
  20. Flash> eraseall
  21. Erasing flash device
  22. Erasing Flash
  23. ................................................................................
  24. ................................................................................
  25. ................................................................................
  26. ...............
  27. Erasing Flash
  28. ....
  29.  
  30. Flash> reset
  31.  
  32. Command error
  33.  
  34. Flash> reboot
  35.  
  36. Command error
  37.  
  38. Flash> exit
  39. Switching off ATX PSU.
  40.  
  41. Cmd> usb_on
  42. Enabling debug USB...
  43.  
  44. Cmd> reset
  45. Command not available in shutdown.
  46.  
  47. Cmd> reboot
  48.  
  49. Powering up system...
  50.  
  51. Switching on ATXPSU...
  52. PMIC RAM configuration (pms_v103.bin)...
  53. MBtemp : 41 degC
  54.  
  55. Configuring motherboard (rev B, var A)...
  56. IOFPGA image \MB\HBI0262B\io_b118.bit
  57. IOFPGA config: PASSED
  58. OSC CLK config: PASSED
  59.  
  60. Configuring SCC registers...
  61. Writing SCC 0x00000054 with 0x0007FFFE
  62. Writing SCC 0x0000005C with 0x00FE001E
  63. Writing SCC 0x00000100 with 0x003F1000
  64. Writing SCC 0x00000104 with 0x0001F300
  65. Writing SCC 0x00000108 with 0x00371000
  66. Writing SCC 0x0000010C with 0x0001B300
  67. Writing SCC 0x00000118 with 0x003F1000
  68. Writing SCC 0x0000011C with 0x0001F100
  69. Writing SCC 0x000000F8 with 0x0BEC0000
  70. Writing SCC 0x000000FC with 0xABE40000
  71. Writing SCC 0x0000000C with 0x000000C2
  72. Writing SCC 0x00000010 with 0x000000C2
  73.  
  74. Peripheral ID0:0x000000AD
  75. Peripheral ID1:0x000000B0
  76. Peripheral ID2:0x0000000B
  77. Peripheral ID3:0x00000000
  78. Peripheral ID4:0x0000000D
  79. Peripheral ID5:0x000000F0
  80. Peripheral ID6:0x00000005
  81. Peripheral ID7:0x000000B1
  82.  
  83. Programming NOR Flash
  84. Erasing Flash
  85. ...
  86. Writing File fip to Flash Address 0x08000000
  87. ......
  88. Image: fip UPDATED from \SOFTWARE\fip.bin
  89. Erasing Flash
  90. .
  91. Writing File bl1 to Flash Address 0x0BEC0000
  92.  
  93. Image: bl1 UPDATED from \SOFTWARE\bl1.bin
  94. Erasing Flash
  95. ..............................................
  96. Writing File norkern to Flash Address 0x08500000
  97. ................................................................................
  98. .....................................
  99. Image: norkern UPDATED from \SOFTWARE\Image
  100. Erasing Flash
  101. .
  102. Writing File board.dtb to Flash Address 0x0A700000
  103.  
  104. Image: board.dtb UPDATED from \SOFTWARE\juno.dtb
  105. Erasing Flash
  106. .
  107. Writing File ramdisk.img to Flash Address 0x09800000
  108.  
  109. Image: ramdisk.img UPDATED from \SOFTWARE\ramdisk.img
  110. Erasing Flash
  111. .
  112. Writing File hdlcdclk to Flash Address 0x0A5C0000
  113.  
  114. Image: hdlcdclk UPDATED from \SOFTWARE\hdlcdclk.dat
  115. Erasing Flash
  116. .
  117. Writing File bl0 to Flash Address 0x0BE40000
  118.  
  119. Image: bl0 UPDATED from \SOFTWARE\bl0.bin
  120. Erasing Flash
  121. .
  122. Writing File startup.nsh to Flash Address 0x0BF00000
  123.  
  124. Image: startup.nsh UPDATED from \SOFTWARE\startup.nsh
  125. Erasing Flash
  126. ....
  127. Writing File BOOTENV to Flash Address 0x0BFC0000
  128. .
  129. Image: BOOTENV UPDATED from \SOFTWARE\blank.img
  130. Erasing Flash
  131. .
  132. Writing File selftest to Flash Address 0x0A600000
  133. ..
  134. Image: selftest UPDATED from \SOFTWARE\selftest
  135. PCIE clock configured...
  136.  
  137. Testing motherboard interfaces (FPGA build 118)...
  138. SRAM 32MB test: PASSED
  139. LAN9118 test: PASSED
  140. ERROR: SMC USB SRAM mode lock
  141. SMC USB test: FAILED
  142. KMI1/2 test: PASSED
  143. MMC test: PASSED
  144. PB/LEDs test: PASSED
  145. FPGA UART test: PASSED
  146. PCIe init test: PASSED
  147. MAC addrs test: PASSED
  148.  
  149. SMC MAC address 0002-F700-588D
  150. Setting HDMI0 mode for SVGA.
  151. Setting HDMI1 mode for SVGA.
  152.  
  153. SoC SMB clock enabled.
  154.  
  155. Testing SMB clock...
  156. SMB clock running
  157. Releasing system resets...
  158.  
  159. UART0 set to SoC UART0
  160. UART1 set to SoC UART1
  161.  
  162. NOTICE: Booting Trusted Firmware
  163. NOTICE: BL1: v1.2(debug):99e8937
  164. NOTICE: BL1: Built : 13:04:53, Oct 21 2016
  165. INFO: BL1: RAM 0x4037000 - 0x4040000
  166. INFO: Using crypto library 'mbed TLS'
  167. INFO: BL1: Loading BL2
  168. INFO: Loading image id=6 at address 0x4006000
  169. INFO: Skip reserving region [base = 0x4006000, size = 0x37f]
  170. INFO: Image id=6 loaded at address 0x4006000, size = 0x37f
  171. INFO: Loading image id=1 at address 0x4006000
  172. INFO: Image id=1 loaded at address 0x4006000, size = 0x11158
  173. NOTICE: BL1: Booting BL2
  174. INFO: Entry point address = 0x4006000
  175. INFO: SPSR = 0x3c5
  176. NOTICE: BL2: v1.2(debug):99e8937
  177. NOTICE: BL2: Built : 13:04:53, Oct 21 2016
  178. INFO: Using crypto library 'mbed TLS'
  179. INFO: BL2: Loading SCP_BL2
  180. INFO: Loading image id=7 at address 0x4023000
  181. INFO: Skip reserving region [base = 0x4023000, size = 0x5ae]
  182. INFO: Image id=7 loaded at address 0x4023000, size = 0x5ae
  183. INFO: Loading image id=8 at address 0x4023000
  184. INFO: Skip reserving region [base = 0x4023000, size = 0x47a]
  185. INFO: Image id=8 loaded at address 0x4023000, size = 0x47a
  186. INFO: Loading image id=12 at address 0x4023000
  187. INFO: Skip reserving region [base = 0x4023000, size = 0x389]
  188. INFO: Image id=12 loaded at address 0x4023000, size = 0x389
  189. INFO: Loading image id=2 at address 0x4023000
  190. INFO: Skip reserving region [base = 0x4023000, size = 0xf334]
  191. INFO: Image id=2 loaded at address 0x4023000, size = 0xf334
  192. INFO: BL2: Initiating SCP_BL2 transfer to SCP
  193. INFO: BL2: SCP_BL2 transferred to SCP
  194. INFO: Configuring TrustZone Controller
  195. INFO: BL2: Loading BL31
  196. INFO: Loading image id=9 at address 0x4023000
  197. INFO: Skip reserving region [base = 0x4023000, size = 0x47a]
  198. INFO: Image id=9 loaded at address 0x4023000, size = 0x47a
  199. INFO: Loading image id=13 at address 0x4023000
  200. INFO: Skip reserving region [base = 0x4023000, size = 0x389]
  201. INFO: Image id=13 loaded at address 0x4023000, size = 0x389
  202. INFO: Loading image id=3 at address 0x4023000
  203. INFO: Image id=3 loaded at address 0x4023000, size = 0xc020
  204. INFO: BL2: Loading BL32
  205. INFO: Loading image id=10 at address 0xff000000
  206. INFO: Skip reserving region [base = 0xff000000, size = 0x488]
  207. INFO: Image id=10 loaded at address 0xff000000, size = 0x488
  208. INFO: Loading image id=14 at address 0xff000000
  209. INFO: Skip reserving region [base = 0xff000000, size = 0x397]
  210. INFO: Image id=14 loaded at address 0xff000000, size = 0x397
  211. INFO: Loading image id=4 at address 0xff000000
  212. INFO: Image id=4 loaded at address 0xff000000, size = 0x3c0a0
  213. INFO: BL2: Loading BL33
  214. INFO: Loading image id=11 at address 0xe0000000
  215. INFO: Skip reserving region [base = 0xe0000000, size = 0x48b]
  216. INFO: Image id=11 loaded at address 0xe0000000, size = 0x48b
  217. INFO: Loading image id=15 at address 0xe0000000
  218. INFO: Skip reserving region [base = 0xe0000000, size = 0x39a]
  219. INFO: Image id=15 loaded at address 0xe0000000, size = 0x39a
  220. INFO: Loading image id=5 at address 0xe0000000
  221. INFO: Image id=5 loaded at address 0xe0000000, size = 0x3eb60
  222. NOTICE: BL1: Booting BL31
  223. INFO: Entry point address = 0x4023000
  224. INFO: SPSR = 0x3cd
  225. NOTICE: BL31: v1.2(debug):99e8937
  226. NOTICE: BL31: Built : 13:04:53, Oct 21 2016
  227. INFO: ARM GICv2 driver initialized
  228. INFO: BL31: Initializing runtime services
  229. INFO: BL31: Initializing BL32
  230. INFO: BL31: Preparing for EL3 exit to normal world
  231. INFO: Entry point address = 0xe0000000
  232. INFO: SPSR = 0x3c9
  233.  
  234.  
  235. U-Boot 2016.11-rc1-g496928e (Oct 21 2016 - 13:13:29 +0000) vexpress_aemv8a, Buil
  236. d: jenkins-armlt-platforms-release-34
  237.  
  238. DRAM: 8 GiB
  239. PCIe XR3 Host Bridge enabled: x4 link (Gen 2)
  240. Flash: 64 MiB
  241. *** Warning - bad CRC, using default environment
  242.  
  243. In: serial_pl01x
  244. Out: serial_pl01x
  245. Err: serial_pl01x
  246. Net: smc911x-0
  247. Hit any key to stop autoboot: 0
  248. loaded region 0 from 08500000 to 80080000, 00B79800 bytes
  249. loaded region 0 from 0A700000 to 83000000, 00005080 bytes
  250. loaded region 0 from 09800000 to 84000000, 00000240 bytes
  251. ## Loading init Ramdisk from Legacy Image at 84000000 ...
  252. Image Name: Dummy ramdisk
  253. Image Type: AArch64 Linux RAMDisk Image (uncompressed)
  254. Data Size: 512 Bytes = 512 Bytes
  255. Load Address: 84000000
  256. Entry Point: 84000000
  257. Verifying Checksum ... OK
  258. ## Flattened Device Tree blob at 83000000
  259. Booting using the fdt blob at 0x83000000
  260. reserving fdt memory region: addr=83000000 size=6000
  261. Using Device Tree in place at 0000000083000000, end 0000000083008fff
  262.  
  263. Starting kernel ...
  264.  
  265. [ 0.000000] Booting Linux on physical CPU 0x100
  266. [ 0.000000] Linux version 4.8.0 (buildslave@x86-64-08) (gcc version 4.9.3 201
  267. 50413 (prerelease) (Linaro GCC 4.9-2015.05) ) #1 SMP PREEMPT Fri Oct 21 13:13:21
  268. UTC 2016
  269. [ 0.000000] Boot CPU: AArch64 Processor [410fd030]
  270. [ 0.000000] earlycon: pl11 at MMIO 0x000000007ff80000 (options '')
  271. [ 0.000000] bootconsole [pl11] enabled
  272. [ 0.000000] efi: Getting EFI parameters from FDT:
  273. [ 0.000000] efi: UEFI not found.
  274. [ 0.000000] cma: Reserved 32 MiB at 0x00000000fd000000
  275. [ 0.000000] On node 0 totalpages: 2093056
  276. [ 0.000000] DMA zone: 7168 pages used for memmap
  277. [ 0.000000] DMA zone: 0 pages reserved
  278. [ 0.000000] DMA zone: 520192 pages, LIFO batch:31
  279. [ 0.000000] Normal zone: 21504 pages used for memmap
  280. [ 0.000000] Normal zone: 1572864 pages, LIFO batch:31
  281. [ 0.000000] psci: probing for conduit method from DT.
  282. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  283. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  284. [ 0.000000] psci: Trusted OS migration not required
  285. [ 0.000000] percpu: Embedded 22 pages/cpu @ffffffc97ff2b000 s51328 r8192 d305
  286. 92 u90112
  287. [ 0.000000] pcpu-alloc: s51328 r8192 d30592 u90112 alloc=22*4096
  288. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  289. [ 0.000000] Detected VIPT I-cache on CPU0
  290. [ 0.000000] CPU features: enabling workaround for ARM errata 826319, 827319,
  291. 824069
  292. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  293. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
  294. es: 2064384
  295. [ 0.000000] Kernel command line: console=ttyAMA0,115200n8 root=/dev/sda2 rw r
  296. ootwait earlycon=pl011,0x7ff80000 debug systemd.log_target=null user_debug=31 an
  297. droidboot.hardware=juno loglevel=9
  298. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  299. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 byte
  300. s)
  301. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  302. [ 0.000000] software IO TLB [mem 0xf8fff000-0xfcfff000] (64MB) mapped at [fff
  303. fffc078fff000-ffffffc07cffefff]
  304. [ 0.000000] Memory: 8133176K/8372224K available (7996K kernel code, 742K rwda
  305. ta, 2200K rodata, 768K init, 666K bss, 206280K reserved, 32768K cma-reserved)
  306. [ 0.000000] Virtual kernel memory layout:
  307. [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 M
  308. B)
  309. [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 G
  310. B)
  311. [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008850000 ( 8000 K
  312. B)
  313. [ 0.000000] .rodata : 0xffffff8008850000 - 0xffffff8008a80000 ( 2240 K
  314. B)
  315. [ 0.000000] .init : 0xffffff8008a80000 - 0xffffff8008b40000 ( 768 K
  316. B)
  317. [ 0.000000] .data : 0xffffff8008b40000 - 0xffffff8008bf9800 ( 742 K
  318. B)
  319. [ 0.000000] .bss : 0xffffff8008bf9800 - 0xffffff8008ca01d0 ( 667 K
  320. B)
  321. [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 K
  322. B)
  323. [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 M
  324. B)
  325. [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 G
  326. B maximum)
  327. [ 0.000000] 0xffffffbf00000000 - 0xffffffbf21400000 ( 532 M
  328. B actual)
  329. [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc980000000 ( 38912 M
  330. B)
  331. [ 0.000000] Preemptible hierarchical RCU implementation.
  332. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  333. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
  334. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  335. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  336. [ 0.000000] GIC: Using split EOI/Deactivate mode
  337. [ 0.000000] GICv2m: range[mem 0x2c1c0000-0x2c1c0fff], SPI[224:255]
  338. [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (ph
  339. ys).
  340. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
  341. 0xb8812736b, max_idle_ns: 440795202655 ns
  342. [ 0.000005] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 43980
  343. 46511100ns
  344. [ 0.008546] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff,
  345. max_idle_ns: 1911260446275 ns
  346. [ 0.018249] Failed to initialize '/smb@08000000/motherboard/iofpga@3,00000000
  347. /timer@120000': -22
  348. [ 0.027270] Console: colour dummy device 80x25
  349. [ 0.031923] Calibrating delay loop (skipped), value calculated using timer fr
  350. equency.. 100.00 BogoMIPS (lpj=200000)
  351. [ 0.042395] pid_max: default: 32768 minimum: 301
  352. [ 0.047167] Security Framework initialized
  353. [ 0.051297] AppArmor: AppArmor initialized
  354. [ 0.055463] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  355. [ 0.062364] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 byte
  356. s)
  357. [ 0.070522] ftrace: allocating 27959 entries in 110 pages
  358. [ 0.141927] ASID allocator initialised with 65536 entries
  359. [ 0.171829] EFI services will not be available.
  360. [ 0.210077] Detected PIPT I-cache on CPU1
  361. [ 0.210083] CPU features: enabling workaround for ARM erratum 832075
  362. [ 0.210122] CPU1: Booted secondary processor [410fd070]
  363. [ 0.238091] Detected PIPT I-cache on CPU2
  364. [ 0.238119] CPU2: Booted secondary processor [410fd070]
  365. [ 0.266171] Detected VIPT I-cache on CPU3
  366. [ 0.266220] CPU3: Booted secondary processor [410fd030]
  367. [ 0.294224] Detected VIPT I-cache on CPU4
  368. [ 0.294261] CPU4: Booted secondary processor [410fd030]
  369. [ 0.322289] Detected VIPT I-cache on CPU5
  370. [ 0.322325] CPU5: Booted secondary processor [410fd030]
  371. [ 0.322396] Brought up 6 CPUs
  372. [ 0.377996] SMP: Total of 6 processors activated.
  373. [ 0.382716] CPU features: detected feature: 32-bit EL0 Support
  374. [ 0.388586] CPU: All CPU(s) started at EL2
  375. [ 0.392726] alternatives: patching kernel code
  376. [ 0.414159] devtmpfs: initialized
  377. [ 0.438271] DMI not present or invalid.
  378. [ 0.442329] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
  379. x_idle_ns: 7645041785100000 ns
  380. [ 0.464169] xor: measuring software checksum speed
  381. [ 0.509048] 8regs : 1337.000 MB/sec
  382. [ 0.553309] 8regs_prefetch: 1259.000 MB/sec
  383. [ 0.597917] 32regs : 1524.000 MB/sec
  384. [ 0.642178] 32regs_prefetch: 1380.000 MB/sec
  385. [ 0.646809] xor: using function: 32regs (1524.000 MB/sec)
  386. [ 0.668560] NET: Registered protocol family 16
  387. [ 0.689064] cpuidle: using governor menu
  388. [ 0.693252] vdso: 2 pages (1 code @ ffffff8008856000, 1 data @ ffffff8008b440
  389. 00)
  390. [ 0.700684] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  391. [ 0.708229] DMA: preallocated 256 KiB pool for atomic allocations
  392. [ 0.714386] Serial: AMBA PL011 UART driver
  393. [ 0.721288] 7ff80000.uart: ttyAMA0 at MMIO 0x7ff80000 (irq = 25, base_baud =
  394. 0) is a PL011 rev3
  395. [ 0.730033] console [ttyAMA0] enabled
  396. [ 0.730033] console [ttyAMA0] enabled
  397. [ 0.737325] bootconsole [pl11] disabled
  398. [ 0.737325] bootconsole [pl11] disabled
  399. [ 0.889324] raid6: int64x1 gen() 281 MB/s
  400. [ 0.961368] raid6: int64x1 xor() 263 MB/s
  401. [ 1.033489] raid6: int64x2 gen() 413 MB/s
  402. [ 1.105587] raid6: int64x2 xor() 353 MB/s
  403. [ 1.177655] raid6: int64x4 gen() 596 MB/s
  404. [ 1.249793] raid6: int64x4 xor() 436 MB/s
  405. [ 1.321884] raid6: int64x8 gen() 683 MB/s
  406. [ 1.393963] raid6: int64x8 xor() 441 MB/s
  407. [ 1.466128] raid6: neonx1 gen() 442 MB/s
  408. [ 1.538224] raid6: neonx1 xor() 412 MB/s
  409. [ 1.610321] raid6: neonx2 gen() 693 MB/s
  410. [ 1.682395] raid6: neonx2 xor() 595 MB/s
  411. [ 1.754505] raid6: neonx4 gen() 904 MB/s
  412. [ 1.826624] raid6: neonx4 xor() 691 MB/s
  413. [ 1.898741] raid6: neonx8 gen() 983 MB/s
  414. [ 1.970857] raid6: neonx8 xor() 725 MB/s
  415. [ 1.975095] raid6: using algorithm neonx8 gen() 983 MB/s
  416. [ 1.980359] raid6: .... xor() 725 MB/s, rmw enabled
  417. [ 1.985193] raid6: using intx1 recovery algorithm
  418. [ 1.990345] vgaarb: loaded
  419. [ 2.005228] SCSI subsystem initialized
  420. [ 2.009054] libata version 3.00 loaded.
  421. [ 2.013007] usbcore: registered new interface driver usbfs
  422. [ 2.018483] usbcore: registered new interface driver hub
  423. [ 2.023800] usbcore: registered new device driver usb
  424. [ 2.029353] dmi: Firmware registration failed.
  425. [ 2.033819] Advanced Linux Sound Architecture Driver Initialized.
  426. [ 2.040384] NetLabel: Initializing
  427. [ 2.043766] NetLabel: domain hash size = 128
  428. [ 2.048086] NetLabel: protocols = UNLABELED CIPSOv4
  429. [ 2.053066] NetLabel: unlabeled traffic allowed by default
  430. [ 2.058876] clocksource: Switched to clocksource arch_sys_counter
  431. [ 2.106933] VFS: Disk quotas dquot_6.6.0
  432. [ 2.134909] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  433. [ 2.141931] AppArmor: AppArmor Filesystem Enabled
  434. [ 2.230885] NET: Registered protocol family 2
  435. [ 2.250990] TCP established hash table entries: 65536 (order: 7, 524288 bytes
  436. )
  437. [ 2.258492] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  438. [ 2.265619] TCP: Hash tables configured (established 65536 bind 65536)
  439. [ 2.272144] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  440. [ 2.278244] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  441. [ 2.298884] NET: Registered protocol family 1
  442. [ 2.318889] RPC: Registered named UNIX socket transport module.
  443. [ 2.324760] RPC: Registered udp transport module.
  444. [ 2.329436] RPC: Registered tcp transport module.
  445. [ 2.334098] RPC: Registered tcp NFSv4.1 backchannel transport module.
  446. [ 2.340481] PCI: CLS 0 bytes, default 128
  447. [ 2.344590] Trying to unpack rootfs image as initramfs...
  448. [ 2.350080] rootfs image is not initramfs (junk in compressed archive); looks
  449. like an initrd
  450. [ 2.358814] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counte
  451. rs available
  452. [ 2.367048] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counte
  453. rs available
  454. [ 2.391513] futex hash table entries: 2048 (order: 6, 262144 bytes)
  455. [ 2.418885] audit: initializing netlink subsys (disabled)
  456. [ 2.424264] audit: type=2000 audit(2.284:1): initialized
  457. [ 2.430185] workingset: timestamp_bits=62 max_order=21 bucket_order=0
  458. [ 2.802902] NFS: Registering the id_resolver key type
  459. [ 2.807936] Key type id_resolver registered
  460. [ 2.812082] Key type id_legacy registered
  461. [ 2.816084] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
  462. [ 2.894900] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
  463. 52)
  464. [ 2.902239] io scheduler noop registered
  465. [ 2.906131] io scheduler deadline registered
  466. [ 2.910372] io scheduler cfq registered (default)
  467. [ 2.915255] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  468. [ 2.920800] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
  469. [ 2.928285] dma-pl330 7ff00000.dma: Loaded driver for PL330 DMAC-341330
  470. [ 2.934852] dma-pl330 7ff00000.dma: DBUFF-1024x16bytes Num_Chans-8 Num_Peri-
  471. 8 Num_Events-8
  472. [ 2.981824] [drm] Initialized drm 1.1.0 20060810
  473. [ 2.994898] brd: module loaded
  474. [ 3.002330] loop: module loaded
  475. [ 3.005718] mtdoops: mtd device (mtddev=name/number) must be supplied
  476. [ 3.012259] libphy: Fixed MDIO Bus: probed
  477. [ 3.016330] sky2: driver version 1.30
  478. [ 3.043374] libphy: smsc911x-mdio: probed
  479. [ 3.047747] smsc911x 18000000.ethernet eth0: MAC Address: 00:02:f7:00:58:8d
  480. [ 3.054686] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  481. [ 3.061156] ehci-pci: EHCI PCI platform driver
  482. [ 3.065598] ehci-platform: EHCI generic platform driver
  483. [ 3.070885] ehci-platform 7ffc0000.ehci: EHCI Host Controller
  484. [ 3.076594] ehci-platform 7ffc0000.ehci: new USB bus registered, assigned bus
  485. number 1
  486. [ 3.084575] ehci-platform 7ffc0000.ehci: irq 28, io mem 0x7ffc0000
  487. [ 3.102891] ehci-platform 7ffc0000.ehci: USB 2.0 started, EHCI 1.00
  488. [ 3.109611] hub 1-0:1.0: USB hub found
  489. [ 3.113352] hub 1-0:1.0: 1 port detected
  490. [ 3.117525] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  491. [ 3.123659] ohci-pci: OHCI PCI platform driver
  492. [ 3.128160] usbcore: registered new interface driver usb-storage
  493. [ 3.134655] mousedev: PS/2 mouse device common for all mice
  494. [ 3.140752] rtc-pl031 1c170000.rtc: rtc core: registered pl031 as rtc0
  495. [ 3.162986] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-d
  496. [email protected]
  497. [ 3.172437] mmci-pl18x 1c050000.mmci: mmc0: PL180 manf 41 rev0 at 0x1c050000
  498. irq 33,0 (pio)
  499. [ 3.180726] mmci-pl18x 1c050000.mmci: DMA channels RX none, TX none
  500. [ 3.227266] usbcore: registered new interface driver usbhid
  501. [ 3.233838] usbhid: USB HID core driver
  502. [ 3.239306] mhu 2b1f0000.mhu: ARM MHU Mailbox registered
  503. [ 3.246930] Initializing XFRM netlink socket
  504. [ 3.251200] NET: Registered protocol family 17
  505. [ 3.255643] NET: Registered protocol family 15
  506. [ 3.260142] Key type dns_resolver registered
  507. [ 3.415395] Btrfs loaded, crc32c=crc32c-generic
  508. [ 3.419956] AppArmor: AppArmor sha1 policy hashing enabled
  509. [ 3.425712] hdlcd 7ff60000.hdlcd: master bind failed: -517
  510. [ 3.432389] scpi_protocol scpi: SCP Protocol 1.2 Firmware 1.18.0 version
  511. [ 3.442902] usb 1-1: new high-speed USB device number 2 using ehci-platform
  512. [ 3.450994] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
  513. [ 3.456756] cpu cpu1: bL_cpufreq_init: CPU 1 initialized
  514. [ 3.462517] arm_big_little: bL_cpufreq_register: Registered platform driver:
  515. scpi
  516. [ 3.492161] [drm] found ARM HDLCD version r0p0
  517. [ 3.497385] tda998x 0-0070: Falling back to first CRTC
  518. [ 3.603342] hub 1-1:1.0: USB hub found
  519. [ 3.607764] hub 1-1:1.0: 4 ports detected
  520. [ 3.630783] tda998x 0-0070: found TDA19988
  521. [ 3.635974] hdlcd 7ff60000.hdlcd: bound 0-0070 (ops 0xffffff80088cf058)
  522. [ 3.642555] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  523. [ 3.649125] [drm] No driver support for vblank timestamp query.
  524. [ 3.681413] random: fast init done
  525. [ 3.685302] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, rema
  526. inder is 233
  527. [ 3.693443] Raw EDID:
  528. [ 3.695714] 00 ff ff ff ff ff ff 00 4c 2d fd 04 00 2d 14 1a
  529. [ 3.701421] c6 01 05 28 70 ce c0 91 2a ae 11 bd 5c 0f 87 93
  530. [ 3.707126] 69 01 38 11 08 0c 2f 34 a8 0f 2e bd 49 1a 1f 8d
  531. [ 3.712830] 5b 72 c2 1b 74 79 1d e1 0c 23 12 16 57 07 00 2a
  532. [ 3.718602] 90 d3 88 38 2e a8 6c 1c 0e 15 28 48 7e 31 41 9a
  533. [ 3.724349] 60 33 98 a3 04 19 02 84 60 0c 0c 0b 93 0f 12 08
  534. [ 3.730091] 56 0c 42 41 51 b4 4d a1 16 0a 89 38 41 47 4a 45
  535. [ 3.735830] d7 05 07 39 f8 2b 52 2b b4 25 17 12 88 20 0a 8f
  536. [ 3.796834] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, rema
  537. inder is 213
  538. [ 3.805758] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, rema
  539. inder is 213
  540. [ 3.870479] Console: switching to colour frame buffer device 170x48
  541. [ 3.893581] hdlcd 7ff60000.hdlcd: fb0: frame buffer device
  542. [ 3.924044] asoc-simple-card sound: i2s-hifi <-> 7ff90000.i2s mapping ok
  543. [ 3.927063] usb 1-1.2: new high-speed USB device number 3 using ehci-platform
  544. [ 3.940586] rtc-pl031 1c170000.rtc: setting system clock to 2016-11-02 10:35:
  545. 03 UTC (1478082903)
  546. [ 3.950492] ALSA device list:
  547. [ 3.953454] #0: 7ff90000.i2s-i2s-hifi
  548. [ 3.957401] uart-pl011 7ff80000.uart: no DMA platform data
  549. [ 4.037729] usb-storage 1-1.2:1.0: USB Mass Storage device detected
  550. [ 4.049466] scsi host0: usb-storage 1-1.2:1.0
  551. [ 4.053956] scsi host0: runtime PM trying to activate child device host0 but
  552. parent (1-1.2:1.0) is not active
  553. [ 4.143095] usb 1-1.3: new low-speed USB device number 4 using ehci-platform
  554. [ 4.167085] atkbd serio0: keyboard reset failed on 1c060000.kmi
  555. [ 4.297160] input: HID 04d9:1203 as /devices/platform/7ffc0000.ehci/usb1/1-1/
  556. 1-1.3/1-1.3:1.0/0003:04D9:1203.0001/input/input1
  557. [ 4.379202] hid-generic 0003:04D9:1203.0001: input: USB HID v1.11 Keyboard [H
  558. ID 04d9:1203] on usb-7ffc0000.ehci-1.3/input0
  559. [ 4.418618] input: HID 04d9:1203 as /devices/platform/7ffc0000.ehci/usb1/1-1/
  560. 1-1.3/1-1.3:1.1/0003:04D9:1203.0002/input/input2
  561. [ 4.492241] hid-generic 0003:04D9:1203.0002: input: USB HID v1.11 Device [HID
  562. 04d9:1203] on usb-7ffc0000.ehci-1.3/input1
  563. [ 4.583094] usb 1-1.4: new low-speed USB device number 5 using ehci-platform
  564. [ 4.708891] input: PixArt Microsoft USB Optical Mouse as /devices/platform/7f
  565. fc0000.ehci/usb1/1-1/1-1.4/1-1.4:1.0/0003:045E:0783.0003/input/input4
  566. [ 4.722520] hid-generic 0003:045E:0783.0003: input: USB HID v1.11 Mouse [PixA
  567. rt Microsoft USB Optical Mouse] on usb-7ffc0000.ehci-1.4/input0
  568. [ 5.098090] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.27 PQ
  569. : 0 ANSI: 6
  570. [ 5.108180] sd 0:0:0:0: [sda] 31266816 512-byte logical blocks: (16.0 GB/14.9
  571. GiB)
  572. [ 5.117413] sd 0:0:0:0: [sda] Write Protect is off
  573. [ 5.122197] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
  574. [ 5.128284] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doe
  575. sn't support DPO or FUA
  576. [ 5.148762] sda: sda1 sda2
  577. [ 5.156650] sd 0:0:0:0: [sda] Attached SCSI disk
  578. [ 5.447055] atkbd serio1: keyboard reset failed on 1c070000.kmi
  579. [ 5.893103] RAMDISK: Couldn't find valid RAM disk image starting at 0.
  580. [ 5.910600] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibi
  581. lities
  582. [ 5.995266] EXT4-fs (sda2): recovery complete
  583. [ 6.001370] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
  584. (null)
  585. [ 6.008995] VFS: Mounted root (ext4 filesystem) on device 8:2.
  586. [ 6.017066] devtmpfs: mounted
  587. [ 6.020449] Freeing unused kernel memory: 768K (ffffffc000a80000 - ffffffc000
  588. b40000)
  589. [ 6.293373] systemd[1]: unhandled level 0 translation fault (11) at 0xd532dd9
  590. 6f0, esr 0x92000004
  591. [ 6.302124] pgd = ffffffc977f08000
  592. [ 6.305517] [d532dd96f0] *pgd=0000000000000000, *pud=0000000000000000
  593. [ 6.311946]
  594. [ 6.313429] CPU: 3 PID: 1 Comm: systemd Not tainted 4.8.0 #1
  595. [ 6.319060] Hardware name: ARM Juno development board (r0) (DT)
  596. [ 6.324954] task: ffffffc977cfed00 task.stack: ffffffc977d60000
  597. [ 6.330845] PC is at 0x557eb96ad8
  598. [ 6.334152] LR is at 0x557eb96ac0
  599. [ 6.337457] pc : [<000000557eb96ad8>] lr : [<000000557eb96ac0>] pstate: 60000
  600. 000
  601. [ 6.344798] sp : 0000007fe61b2230
  602. [ 6.348094] x29: 0000007fe61b2300 x28: 000000557ec77000
  603. [ 6.353385] x27: 000000557ec78000 x26: 0000000000000001
  604. [ 6.358673] x25: 00000055b952935b x24: 0000000000000000
  605. [ 6.363973] x23: 0000007fe61b2420 x22: 000000557ec79000
  606. [ 6.369261] x21: 000000557ec78000 x20: 0005404efe2f62e6
  607. [ 6.374550] x19: 0000007fe61b27d8 x18: 0000000000000000
  608. [ 6.379851] x17: 0000007fb426bf28 x16: 000000557ec775a0
  609. [ 6.385139] x15: 0000000000000000 x14: 000000000000000f
  610. [ 6.390427] x13: 422b20504d4f4343 x12: 45532d20345a4c2d
  611. [ 6.395730] x11: 294e44492d20444f x10: 4d4b2b20534c4954
  612. [ 6.401018] x9 : 55464c452d204449 x8 : 4b4c422b20504d4f
  613. [ 6.406314] x7 : 0000007fe61b1948 x6 : 0000000000000000
  614. [ 6.411615] x5 : 0000000000000000 x4 : 000000557ec40bb8
  615. [ 6.416903] x3 : 0000000000000667 x2 : 0000000000000010
  616. [ 6.422188] x1 : 0000007fb41626f0 x0 : 000000557ec77000
  617. [ 6.427487]
  618. [ 13.706927] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, rema
  619. inder is 19
  620. [ 13.714968] Raw EDID:
  621. [ 13.717223] 00 ff ff ff ff ff ff 00 4c 2d fd 04 00 00 00 72
  622. [ 13.722929] 6d 2f 37 66 66 36 30 30 30 30 2e 68 64 6c 63 64
  623. [ 13.728631] 2f 64 72 6d 2f 63 61 72 64 30 00 00 00 00 00 00
  624. [ 13.734337] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  625. [ 13.740043] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  626. [ 13.745744] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  627. [ 13.751449] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  628. [ 13.757153] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  629. [ 13.790813] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, rema
  630. inder is 99
  631. [ 13.798900] Raw EDID:
  632. [ 13.801155] 00 ff ff ff ff ff ff 00 4c 2d fd 04 00 00 00 00
  633. [ 13.806878] 2f 2f 37 66 66 36 30 30 30 30 2e 68 64 6c 63 64
  634. [ 13.812581] 2f 64 72 6d 2f 63 61 72 64 30 00 00 00 00 00 00
  635. [ 13.818287] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  636. [ 13.823992] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  637. [ 13.829695] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  638. [ 13.835420] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  639. [ 13.841126] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  640. [ 64.784916] usb 1-1.4: USB disconnect, device number 5
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!