Advertisement
Guest User

Untitled

a guest
Nov 28th, 2020
54
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 17.90 KB | None | 0 0
  1. U-Boot TPL 2021.01-rc2-00156-g7889951d0f (Nov 28 2020 - 15:27:34)
  2. Channel 0: DDR3, 800MHz
  3. BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
  4. Channel 1: DDR3, 800MHz
  5. BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
  6. 256B stride
  7. Trying to boot from BOOTROM
  8. Returning to boot ROM...
  9.  
  10. U-Boot SPL 2021.01-rc2-00156-g7889951d0f (Nov 28 2020 - 15:27:34 +0100)
  11. Trying to boot from MMC1
  12. NOTICE:  BL31: v2.4(release):v2.4-21-g38f7e32ea-dirty
  13. NOTICE:  BL31: Built : 11:22:39, Nov 26 2020
  14. INFO:    GICv3 with legacy support detected.
  15. INFO:    ARM GICv3 driver initialized in EL3
  16. INFO:    plat_rockchip_pmu_init(1624): pd status 3e
  17. INFO:    BL31: Initializing runtime services
  18. INFO:    BL31: Initializing BL32
  19. I/TC:
  20. I/TC: No non-secure external DT
  21. I/TC: OP-TEE version: d43a527de-dev #1 Thu Nov 26 22:57:43 UTC 2020 aarch64
  22. I/TC: Initialized
  23. INFO:    BL31: Preparing for EL3 exit to normal world
  24. INFO:    Entry point address = 0x200000
  25. INFO:    SPSR = 0x3c9
  26.  
  27.  
  28. U-Boot 2021.01-rc2-00156-g7889951d0f (Nov 28 2020 - 15:27:34 +0100)
  29.  
  30. SoC: Rockchip rk3399
  31. Reset cause: POR
  32. Model: Firefly-RK3399 Board
  33. DRAM:  3.9 GiB
  34. PMIC:  RK808
  35. Cannot find regulator pwm init_voltage
  36. MMC:   mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
  37. Loading Environment from MMC... *** Warning - bad CRC, using default environment
  38.  
  39. In:    serial@ff1a0000
  40. Out:   serial@ff1a0000
  41. Err:   serial@ff1a0000
  42. Model: Firefly-RK3399 Board
  43. Net:   eth0: ethernet@fe300000
  44. Hit any key to stop autoboot:  0
  45. switch to partitions #0, OK
  46. mmc0(part 0) is current device
  47. ** No partition table - mmc 0 **
  48. switch to partitions #0, OK
  49. mmc1 is current device
  50. Scanning mmc 1:1...
  51. Found /extlinux/extlinux.conf
  52. Retrieving file: /extlinux/extlinux.conf
  53. 226 bytes read in 4 ms (54.7 KiB/s)
  54. 1:      rockchip-kernel-4.4
  55. Retrieving file: /ramdisk.img
  56. 8863890 bytes read in 379 ms (22.3 MiB/s)
  57. Retrieving file: /Image
  58. 22743048 bytes read in 968 ms (22.4 MiB/s)
  59. append: earlyprintk console=ttyS0,1500000n8 rw root=UUID=cae75d80-9691-466f-a275-d09db0fddd0b rootwait rootfstype=ext4 init=/sbin/init
  60. Retrieving file: /rk3399.dtb
  61. 103169 bytes read in 8 ms (12.3 MiB/s)
  62. ## Flattened Device Tree blob at 01f00000
  63.    Booting using the fdt blob at 0x1f00000
  64.    Loading Ramdisk to f56ae000, end f5f22092 ... OK
  65. ERROR: reserving fdt memory region failed (addr=0 size=0)
  66.    Loading Device Tree to 00000000f5691000, end 00000000f56ad300 ... OK
  67.  
  68. Starting kernel ...
  69.  
  70. [    0.000000] Booting Linux on physical CPU 0x0
  71. [    0.000000] Initializing cgroup subsys cpuset
  72. [    0.000000] Initializing cgroup subsys cpu
  73. [    0.000000] Initializing cgroup subsys cpuacct
  74. [    0.000000] Linux version 4.4.194 (root@5bb15a6ded8e) (firefly: d43a527decaeab5a1609e0037d4b6b5fd5d7a09d update) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #9 SMP Sat Nov 28 21:43:51 CET 2020
  75. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  76. [    0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
  77. [    0.000000] psci: probing for conduit method from DT.
  78. [    0.000000] psci: PSCIv1.1 detected in firmware.
  79. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  80. [    0.000000] psci: Trusted OS migration not required
  81. [    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ecc000 s46312 r8192 d31512 u86016
  82. [    0.000000] Detected VIPT I-cache on CPU0
  83. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  84. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 999432
  85. [    0.000000] Kernel command line: earlyprintk console=ttyS0,1500000n8 rw root=UUID=cae75d80-9691-466f-a275-d09db0fddd0b rootwait rootfstype=ext4 init=/sbin/init
  86. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  87. [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  88. [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  89. [    0.000000] software IO TLB: mapped [mem 0xeec00000-0xf2c00000] (64MB)
  90. [    0.000000] Memory: 3889276K/4061184K available (13886K kernel code, 1794K rwdata, 5280K rodata, 1216K init, 2006K bss, 171908K reserved, 0K cma-reserved)
  91. [    0.000000] Virtual kernel memory layout:
  92. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  93. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
  94. [    0.000000]       .init : 0xffffff8009340000 - 0xffffff8009470000   (  1216 KB)
  95. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008e10000   ( 13888 KB)
  96. [    0.000000]     .rodata : 0xffffff8008e10000 - 0xffffff8009340000   (  5312 KB)
  97. [    0.000000]       .data : 0xffffff8009470000 - 0xffffff8009630808   (  1795 KB)
  98. [    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
  99. [    0.000000]               0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
  100. [    0.000000]     fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
  101. [    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
  102. [    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
  103. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  104. [    0.000000] Hierarchical RCU implementation.
  105. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  106. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  107. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  108. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  109. [    0.000000] GIC: Using split EOI/Deactivate mode
  110. [    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  111. [    0.000000] ITS: allocated 65536 Devices @300000 (psz 64K, shr 0)
  112. [    0.000000] ITS: using cache flushing for cmd queue
  113. [    0.000000] GIC: using LPI property table @0x0000000000290000
  114. [    0.000000] ITS: Allocated 1792 chunks for LPIs
  115. [    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  116. [    0.000000] CPU0: using LPI pending table @0x00000000002a0000
  117. [    0.000000] GIC: using cache flushing for LPI property table
  118. [    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  119. [    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  120. [    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
  121. [    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
  122. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  123. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  124. [    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  125. [    0.001495] Console: colour dummy device 80x25
  126. [    0.001522] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
  127. [    0.001536] pid_max: default: 32768 minimum: 301
  128. [    0.001631] Security Framework initialized
  129. [    0.001700] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  130. [    0.001712] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  131. [    0.002513] Initializing cgroup subsys io
  132. [    0.002533] Initializing cgroup subsys memory
  133. [    0.002565] Initializing cgroup subsys devices
  134. [    0.002579] Initializing cgroup subsys freezer
  135. [    0.002593] Initializing cgroup subsys perf_event
  136. [    0.002606] Initializing cgroup subsys net_prio
  137. [    0.002618] Initializing cgroup subsys pids
  138. [    0.002649] ftrace: allocating 50329 entries in 197 pages
  139. [    0.131957] sched-energy: Sched-energy-costs installed from DT
  140. [    0.131974] CPU0: update cpu_capacity 401
  141. [    0.132031] ASID allocator initialised with 32768 entries
  142. [    0.135386] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  143. [    0.135953] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  144. [    0.137380] Detected VIPT I-cache on CPU1
  145. [    0.137412] CPU1: found redistributor 1 region 0:0x00000000fef20000
  146. [    0.137441] CPU1: using LPI pending table @0x00000000ee550000
  147. [    0.137481] CPU1: update cpu_capacity 401
  148. [    0.137485] CPU1: Booted secondary processor [410fd034]
  149. [    0.138074] Detected VIPT I-cache on CPU2
  150. [    0.138095] CPU2: found redistributor 2 region 0:0x00000000fef40000
  151. [    0.138121] CPU2: using LPI pending table @0x00000000ee570000
  152. [    0.138147] CPU2: update cpu_capacity 401
  153. [    0.138151] CPU2: Booted secondary processor [410fd034]
  154. [    0.138704] Detected VIPT I-cache on CPU3
  155. [    0.138724] CPU3: found redistributor 3 region 0:0x00000000fef60000
  156. [    0.138751] CPU3: using LPI pending table @0x00000000ee5d0000
  157. [    0.138777] CPU3: update cpu_capacity 401
  158. [    0.138781] CPU3: Booted secondary processor [410fd034]
  159. [    0.139357] Detected PIPT I-cache on CPU4
  160. [    0.139385] CPU4: found redistributor 100 region 0:0x00000000fef80000
  161. [    0.139424] CPU4: using LPI pending table @0x00000000ee600000
  162. [    0.139462] CPU4: update cpu_capacity 1024
  163. [    0.139465] CPU4: Booted secondary processor [410fd082]
  164. [    0.140057] Detected PIPT I-cache on CPU5
  165. [    0.140076] CPU5: found redistributor 101 region 0:0x00000000fefa0000
  166. [    0.140111] CPU5: using LPI pending table @0x00000000ee630000
  167. [    0.140137] CPU5: update cpu_capacity 1024
  168. [    0.140140] CPU5: Booted secondary processor [410fd082]
  169. [    0.140229] Brought up 6 CPUs
  170. [    0.140312] SMP: Total of 6 processors activated.
  171. [    0.140321] CPU features: detected feature: GIC system register CPU interface
  172. [    0.140330] CPU features: detected feature: 32-bit EL0 Support
  173. [    0.140342] CPU: All CPU(s) started at EL2
  174. [    0.140388] alternatives: patching kernel code
  175. [    0.141853] devtmpfs: initialized
  176. [    0.159425] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  177. [    0.159450] futex hash table entries: 2048 (order: 5, 131072 bytes)
  178. [    0.159904] xor: measuring software checksum speed
  179. [    0.169135]    8regs     :  2856.000 MB/sec
  180. [    0.179190]    8regs_prefetch:  2564.000 MB/sec
  181. [    0.189244]    32regs    :  3208.000 MB/sec
  182. [    0.199299]    32regs_prefetch:  2848.000 MB/sec
  183. [    0.199306] xor: using function: 32regs (3208.000 MB/sec)
  184. [    0.199324] pinctrl core: initialized pinctrl subsystem
  185. [    0.201046] Failed to find legacy iommu devices
  186. [    0.201433] NET: Registered protocol family 16
  187. [    0.206393] cpuidle: using governor ladder
  188. [    0.210413] cpuidle: using governor menu
  189. [    0.210434] Registered FIQ tty driver
  190. [    0.210669] vdso: 2 pages (1 code @ ffffff8008e16000, 1 data @ ffffff8009474000)
  191. [    0.210697] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  192. [    0.210858] DMA: preallocated 256 KiB pool for atomic allocations
  193. [    0.210935] sip_firmware_init: set rockchip sip version v2 failed
  194. [    0.234348] console [pstore-1] enabled
  195. [    0.234356] pstore: Registered ramoops as persistent store backend
  196. [    0.234365] ramoops: attached 0xf0000@0x110000, ecc: 0/0
  197. [    0.304130] console [ttyFIQ0] enabled
  198. [    0.304670] Registered fiq debugger ttyFIQ0
  199. [    0.354228] raid6: int64x1  gen()   468 MB/s
  200. [    0.371337] raid6: int64x1  xor()   412 MB/s
  201. [    0.388414] raid6: int64x2  gen()   675 MB/s
  202. [    0.405497] raid6: int64x2  xor()   601 MB/s
  203. [    0.422579] raid6: int64x4  gen()   984 MB/s
  204. [    0.439667] raid6: int64x4  xor()   673 MB/s
  205. [    0.456773] raid6: int64x8  gen()   781 MB/s
  206. [    0.473839] raid6: int64x8  xor()   628 MB/s
  207. [    0.490957] raid6: neonx1   gen()   964 MB/s
  208. [    0.508048] raid6: neonx1   xor()   675 MB/s
  209. [    0.525155] raid6: neonx2   gen()  1277 MB/s
  210. [    0.542218] raid6: neonx2   xor()   982 MB/s
  211. [    0.559297] raid6: neonx4   gen()  1730 MB/s
  212. [    0.576409] raid6: neonx4   xor()  1181 MB/s
  213. [    0.593502] raid6: neonx8   gen()  1691 MB/s
  214. [    0.610583] raid6: neonx8   xor()  1236 MB/s
  215. [    0.610966] raid6: using algorithm neonx4 gen() 1730 MB/s
  216. [    0.611446] raid6: .... xor() 1181 MB/s, rmw enabled
  217. [    0.611891] raid6: using intx1 recovery algorithm
  218. [    0.617255] iommu: Adding device ff650000.vpu_service to group 0
  219. [    0.617877] iommu: Adding device ff660000.rkvdec to group 1
  220. [    0.618476] iommu: Adding device ff8f0000.vop to group 2
  221. [    0.619039] iommu: Adding device ff900000.vop to group 3
  222. [    0.619594] iommu: Adding device ff910000.rkisp1 to group 4
  223. [    0.620184] iommu: Adding device ff920000.rkisp1 to group 5
  224. [    0.621167] rk_iommu ff650800.iommu: can't get sclk
  225. [    0.621857] rk_iommu ff660480.iommu: can't get sclk
  226. [    0.622501] rk_iommu ff8f3f00.iommu: can't get sclk
  227. [    0.623103] rk_iommu ff903f00.iommu: can't get sclk
  228. [    0.623713] rk_iommu ff914000.iommu: can't get sclk
  229. [    0.624303] rk_iommu ff924000.iommu: can't get sclk
  230. [    0.625112] SCSI subsystem initialized
  231. [    0.625804] usbcore: registered new interface driver usbfs
  232. [    0.626332] usbcore: registered new interface driver hub
  233. [    0.626892] usbcore: registered new device driver usb
  234. [    0.627401] media: Linux media interface: v0.10
  235. [    0.627842] Linux video capture interface: v2.00
  236. [    0.628330] pps_core: LinuxPPS API ver. 1 registered
  237. [    0.628776] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  238. [    0.629604] PTP clock support registered
  239. [    0.631123] Advanced Linux Sound Architecture Driver Initialized.
  240. [    0.632150] Bluetooth: Core ver 2.21
  241. [    0.632489] NET: Registered protocol family 31
  242. [    0.632899] Bluetooth: HCI device and connection manager initialized
  243. [    0.633467] Bluetooth: HCI socket layer initialized
  244. [    0.633911] Bluetooth: L2CAP socket layer initialized
  245. [    0.634375] Bluetooth: SCO socket layer initialized
  246. [    0.635317] nfc: nfc_init: NFC Core ver 0.1
  247. [    0.635732] NET: Registered protocol family 39
  248. [    0.636266] rockchip-cpuinfo cpuinfo: Serial         : 3070c9d1c20034f0
  249. [    0.637355] clocksource: Switched to clocksource arch_sys_counter
  250. [    0.688740] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  251. [    0.689671] NET: Registered protocol family 2
  252. [    0.690495] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  253. [    0.691407] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
  254. [    0.692917] TCP: Hash tables configured (established 32768 bind 32768)
  255. [    0.693601] UDP hash table entries: 2048 (order: 5, 196608 bytes)
  256. [    0.694293] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
  257. [    0.695221] NET: Registered protocol family 1
  258. [    0.695926] RPC: Registered named UNIX socket transport module.
  259. [    0.696469] RPC: Registered udp transport module.
  260. [    0.696891] RPC: Registered tcp transport module.
  261. [    0.697313] RPC: Registered tcp NFSv4.1 backchannel transport module.
  262. [    0.698580] Trying to unpack rootfs image as initramfs...
  263. [    1.111730] Freeing initrd memory: 8656K
  264. [    1.112561] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  265. [    1.113459] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  266. [    1.117584] Initialise system trusted keyring
  267. [    1.126072] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  268. [    1.127381] NFS: Registering the id_resolver key type
  269. [    1.127849] Key type id_resolver registered
  270. [    1.128226] Key type id_legacy registered
  271. [    1.128618] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  272. [    1.129901] ntfs: driver 2.1.32 [Flags: R/O].
  273. [    1.130677] fuse init (API version 7.23)
  274. [    1.131385] SGI XFS with security attributes, no debug enabled
  275. [    1.137480] NET: Registered protocol family 38
  276. [    1.137898] Key type asymmetric registered
  277. [    1.138267] Asymmetric key parser 'x509' registered
  278. [    1.138870] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  279. [    1.139677] io scheduler noop registered
  280. [    1.140035] io scheduler deadline registered
  281. [    1.140457] io scheduler cfq registered (default)
  282. [    1.142465] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator
  283. [    1.147677] ace test_init function.
  284. [    1.148166] ace test_init end.ret=0
  285. [    1.148875] radar end.ret=0
  286. [    1.151675] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
  287. [    1.152265] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  288. [    1.152868] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  289. [    1.153441] rockchip-pcie f8000000.pcie: missing "memory-region" property
  290. [    1.154045] PCI host bridge /pcie@f8000000 ranges:
  291. [    1.154524]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
  292. [    1.154532]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
  293. [    1.696420] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
  294. [    1.697041] rockchip-pcie f8000000.pcie: deferred probe failed
  295. [    1.697800] rockchip-pcie: probe of f8000000.pcie failed with error -110
  296. [    1.699392] Module initialized.
  297. [    1.700167] rk-vcodec ff650000.vpu_service: no regulator for vcodec
  298. [    1.701045] rk-vcodec ff650000.vpu_service: probe device
  299. [    1.701778] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
  300. [    1.702962] rk-vcodec ff650000.vpu_service: could not find power_model node
  301. [    1.703603] rk-vcodec ff650000.vpu_service: init success
  302. [    1.704321] rk-vcodec ff660000.rkvdec: no regulator for vcodec
  303. [    1.705272] rk-vcodec ff660000.rkvdec: probe device
  304. [    1.705924] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
  305. [    1.706899] rk-vcodec ff660000.rkvdec: could not find power_model node
  306. [    1.707493] rk-vcodec ff660000.rkvdec: init success
  307. [    1.709427] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  308. [    1.710098] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  309. [    1.712324] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  310. [    1.713008] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  311. [    1.714876] rockchip-system-monitor rockchip-system-monitor: system monitor probe
  312.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement