Advertisement
niwo

SMART #1

Apr 25th, 2020
56
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.99 KB | None | 0 0
  1. C:\Users\niwo>smartctl -a F:
  2. smartctl 7.1 2019-12-30 r5022 [x86_64-w64-mingw32-win7-sp1] (sf-7.1-1)
  3. Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Western Digital RE Serial ATA
  7. Device Model: WDC WD2500YS-01SHB1
  8. Serial Number: WD-WCANY4199326
  9. LU WWN Device Id: 5 0014ee 1ab7accff
  10. Firmware Version: 20.06C06
  11. User Capacity: 251.000.193.024 bytes [251 GB]
  12. Sector Size: 512 bytes logical/physical
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
  15. Local Time is: Sat Apr 25 14:24:03 2020 MS
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x82) Offline data collection activity
  24. was completed without error.
  25. Auto Offline Data Collection: Enabled.
  26. Self-test execution status: ( 121) The previous self-test completed having
  27. the read element of the test failed.
  28. Total time to complete Offline
  29. data collection: ( 8400) seconds.
  30. Offline data collection
  31. capabilities: (0x7b) SMART execute Offline immediate.
  32. Auto Offline data collection on/off support.
  33. Suspend Offline collection upon new
  34. command.
  35. Offline surface scan supported.
  36. Self-test supported.
  37. Conveyance Self-test supported.
  38. Selective Self-test supported.
  39. SMART capabilities: (0x0003) Saves SMART data before entering
  40. power-saving mode.
  41. Supports SMART auto save timer.
  42. Error logging capability: (0x01) Error logging supported.
  43. General Purpose Logging supported.
  44. Short self-test routine
  45. recommended polling time: ( 2) minutes.
  46. Extended self-test routine
  47. recommended polling time: ( 98) minutes.
  48. Conveyance self-test routine
  49. recommended polling time: ( 6) minutes.
  50. SCT capabilities: (0x103f) SCT Status supported.
  51. SCT Error Recovery Control supported.
  52. SCT Feature Control supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 16
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 4
  59. 3 Spin_Up_Time 0x0003 195 184 021 Pre-fail Always - 5250
  60. 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1231
  61. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  62. 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
  63. 9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 19078
  64. 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
  65. 11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
  66. 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1231
  67. 194 Temperature_Celsius 0x0022 111 100 000 Old_age Always - 39
  68. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  69. 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 2
  70. 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
  71. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 1
  72. 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
  73.  
  74. SMART Error Log Version: 1
  75. ATA Error Count: 4
  76. CR = Command Register [HEX]
  77. FR = Features Register [HEX]
  78. SC = Sector Count Register [HEX]
  79. SN = Sector Number Register [HEX]
  80. CL = Cylinder Low Register [HEX]
  81. CH = Cylinder High Register [HEX]
  82. DH = Device/Head Register [HEX]
  83. DC = Device Command Register [HEX]
  84. ER = Error register [HEX]
  85. ST = Status register [HEX]
  86. Powered_Up_Time is measured from power on, and printed as
  87. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  88. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  89.  
  90. Error 4 occurred at disk power-on lifetime: 19077 hours (794 days + 21 hours)
  91. When the command that caused the error occurred, the device was active or idle.
  92.  
  93. After command completion occurred, registers were:
  94. ER ST SC SN CL CH DH
  95. -- -- -- -- -- -- --
  96. 40 51 80 60 f0 66 e0 Error: UNC 128 sectors at LBA = 0x0066f060 = 6746208
  97.  
  98. Commands leading to the command that caused the error were:
  99. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  100. -- -- -- -- -- -- -- -- ---------------- --------------------
  101. 25 00 80 60 f0 66 00 00 00:14:00.230 READ DMA EXT
  102. 25 00 80 e0 ef 66 00 00 00:14:00.227 READ DMA EXT
  103. 25 00 80 60 ef 66 00 00 00:14:00.224 READ DMA EXT
  104. 25 00 80 e0 ee 66 00 00 00:14:00.222 READ DMA EXT
  105. 25 00 80 60 ee 66 00 00 00:14:00.219 READ DMA EXT
  106.  
  107. Error 3 occurred at disk power-on lifetime: 19077 hours (794 days + 21 hours)
  108. When the command that caused the error occurred, the device was active or idle.
  109.  
  110. After command completion occurred, registers were:
  111. ER ST SC SN CL CH DH
  112. -- -- -- -- -- -- --
  113. 40 51 80 60 f0 66 e0 Error: UNC 128 sectors at LBA = 0x0066f060 = 6746208
  114.  
  115. Commands leading to the command that caused the error were:
  116. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  117. -- -- -- -- -- -- -- -- ---------------- --------------------
  118. 25 00 80 60 f0 66 00 00 00:13:44.396 READ DMA EXT
  119. e5 00 00 00 00 00 00 00 00:13:42.549 CHECK POWER MODE
  120. e5 00 00 00 00 00 00 00 00:13:34.379 CHECK POWER MODE
  121. e5 00 00 00 00 00 00 00 00:13:26.208 CHECK POWER MODE
  122. e5 00 00 00 00 00 00 00 00:13:18.038 CHECK POWER MODE
  123.  
  124. Error 2 occurred at disk power-on lifetime: 19077 hours (794 days + 21 hours)
  125. When the command that caused the error occurred, the device was active or idle.
  126.  
  127. After command completion occurred, registers were:
  128. ER ST SC SN CL CH DH
  129. -- -- -- -- -- -- --
  130. 40 51 80 60 f0 66 e0 Error: UNC 128 sectors at LBA = 0x0066f060 = 6746208
  131.  
  132. Commands leading to the command that caused the error were:
  133. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  134. -- -- -- -- -- -- -- -- ---------------- --------------------
  135. 25 00 80 60 f0 66 00 00 00:09:27.598 READ DMA EXT
  136. 25 00 80 e0 ef 66 00 00 00:09:27.596 READ DMA EXT
  137. 25 00 80 60 ef 66 00 00 00:09:27.593 READ DMA EXT
  138. 25 00 80 e0 ee 66 00 00 00:09:27.590 READ DMA EXT
  139. 25 00 80 60 ee 66 00 00 00:09:27.588 READ DMA EXT
  140.  
  141. Error 1 occurred at disk power-on lifetime: 19077 hours (794 days + 21 hours)
  142. When the command that caused the error occurred, the device was active or idle.
  143.  
  144. After command completion occurred, registers were:
  145. ER ST SC SN CL CH DH
  146. -- -- -- -- -- -- --
  147. 01 51 80 00 7c 87 e0 Error: AMNF 128 sectors at LBA = 0x00877c00 = 8879104
  148.  
  149. Commands leading to the command that caused the error were:
  150. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  151. -- -- -- -- -- -- -- -- ---------------- --------------------
  152. 25 00 80 00 7c 87 00 00 00:05:31.349 READ DMA EXT
  153. 25 00 80 80 3b 87 00 00 00:05:31.337 READ DMA EXT
  154. 25 00 80 00 fb 86 00 00 00:05:31.332 READ DMA EXT
  155. 25 00 80 80 ba 86 00 00 00:05:31.320 READ DMA EXT
  156. 25 00 80 00 7a 86 00 00 00:05:31.310 READ DMA EXT
  157.  
  158. SMART Self-test log structure revision number 1
  159. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  160. # 1 Short offline Completed: read failure 90% 19078 6746210
  161. # 2 Extended offline Completed: read failure 90% 19078 6746210
  162.  
  163. SMART Selective self-test log data structure revision number 1
  164. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  165. 1 0 0 Not_testing
  166. 2 0 0 Not_testing
  167. 3 0 0 Not_testing
  168. 4 0 0 Not_testing
  169. 5 0 0 Not_testing
  170. Selective self-test flags (0x0):
  171. After scanning selected spans, do NOT read-scan remainder of disk.
  172. If Selective self-test is pending on power-up, resume after 0 minute delay.
  173.  
  174.  
  175. C:\Users\niwo>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement