API tools faq
paste
Guest User

McBin + Centos AltArch7

a guest
May 9th, 2019
133
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 47.67 KB | None | 0 0
raw download clone embed print report
  1. BootROM - 2.03
  2. Starting CP-1 IOROM 1.07
  3. Booting from SPI NOR flash 1 (0x32)
  4. Found valid image at boot postion 0x000t Entry
  5. lNOTICE: Starting binary extension
  6. NOTICE: SVC: SW Revision 0x0. SVC is not supported
  7. mv_ddr: mv_ddr-devel-18.08.0-ga881467 (May 09 2019 - 10:46:50)
  8. mv_ddr: completed successfully
  9. NOTICE: Cold boot
  10. NOTICE: Booting Trusted Firmware
  11. NOTICE: BL1: v2.1(release):jaz-127-gf2f0846 (Marvell-devel-18.12.0)
  12. NOTICE: BL1: Built : 10:47:06, May 9 2019
  13. NOTICE: BL1: Booting BL2
  14. NOTICE: BL2: v2.1(release):jaz-127-gf2f0846 (Marvell-devel-18.12.0)
  15. NOTICE: BL2: Built : 10:47:12, May 9 2019
  16. NOTICE: SCP_BL2 contains 5 concatenated images
  17. NOTICE: Skipping MSS CP3 related image
  18. NOTICE: Skipping MSS CP2 related image
  19. NOTICE: Load image to CP1 MSS AP0
  20. NOTICE: Loading MSS image from addr. 0x40269f4 Size 0x1cd8 to MSS at 0xf4280000
  21. NOTICE: Done
  22. NOTICE: Load image to CP0 MSS AP0
  23. NOTICE: Loading MSS image from addr. 0x40286cc Size 0x1cd8 to MSS at 0xf2280000
  24. NOTICE: Done
  25. NOTICE: Load image to AP0 MSS
  26. NOTICE: Loading MSS image from addr. 0x402a3a4 Size 0x5420 to MSS at 0xf0580000
  27. NOTICE: Done
  28. NOTICE: SCP Image doesn't contain PM firmware
  29. NOTICE: BL1: Booting BL31
  30. lNOTICE: MSS PM is not supported in this build
  31. NOTICE: BL31: v2.1(release):jaz-127-gf2f0846 (Marvell-devel-18.12.0)
  32. NOTICE: BL31: Built : 10:47:22, May 9 2019
  33.  
  34. Armada Platform Init
  35.  
  36. Comphy0-0: PCIE0 5 Gbps
  37. Comphy0-1: PCIE0 5 Gbps
  38. Comphy0-2: PCIE0 5 Gbps
  39. Comphy0-3: PCIE0 5 Gbps
  40. Comphy0-4: SFI 10.31 Gbps
  41. Comphy0-5: SATA1 5 Gbps
  42.  
  43. Comphy1-0: SGMII1 1.25 Gbps
  44. Comphy1-1: SATA2 5 Gbps
  45. Comphy1-2: USB3_HOST0 5 Gbps
  46. Comphy1-3: SATA3 5 Gbps
  47. Comphy1-4: SFI 10.31 Gbps
  48. Comphy1-5: SGMII2 3.125 Gbps
  49.  
  50. UTMI PHY 0 initialized to USB Host0
  51. UTMI PHY 1 initialized to USB Host1
  52. UTMI PHY 2 initialized to USB Host0
  53. Succesfully installed protocol interfaces
  54. Error: Image at 000BF719000 start failed: 00000001
  55. remove-symbol-file /home/mw/git/edk2-workspace/Build/Armada80x0McBin-AARCH64/RELEASE_GCC5/AARCH64/MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe/DEBUG/AcpiPlatform.dll 0xBF71A000
  56. Detected w25q32bv SPI NOR flash with page size 256 B, erase size 4 KB, total 4 MB
  57. pcie@0xF2600000 link UP
  58.  
  59. [...]
  60.  
  61. Tianocore/EDK2 firmware version MARVELL_EFI
  62. Press ESCAPE for boot options ...
  63.  
  64.  
  65.  
  66. CentOS Linux (4.14.0-49.13.1.el7a.aarch64) 7 (AltArch)
  67. CentOS Linux (4.14.0-49.el7a.aarch64) 7 (AltArch)
  68. CentOS Linux (0-rescue-611cf1f62af14dc09eeb3a3f9e36b19a) 7 (AltArch)
  69. Debian GNU/Linux (buster/sid) (on /dev/sdc2)
  70. Advanced options for Debian GNU/Linux (buster/sid) (on /dev/sdc2)
  71.  
  72.  
  73.  
  74.  
  75.  
  76.  
  77.  
  78.  
  79.  
  80.  
  81.  
  82.  
  83. Use the ^ and v keys to change the selection.
  84. Press 'e' to edit the selected item, or 'c' for a command prompt.
  85. The selected entry will be started automatically in 0s.
  86.  
  87.  
  88.  
  89.  
  90.  
  91.  
  92.  
  93.  
  94.  
  95.  
  96.  
  97.  
  98.  
  99.  
  100.  
  101.  
  102.  
  103.  
  104.  
  105.  
  106.  
  107.  
  108.  
  109.  
  110.  
  111.  
  112.  
  113.  
  114.  
  115.  
  116.  
  117.  
  118.  
  119.  
  120.  
  121.  
  122.  
  123.  
  124.  
  125.  
  126.  
  127. EFI stub: Booting Linux Kernel...
  128. EFI stub: Using DTB from configuration table
  129. EFI stub: Exiting boot services and installing virtual address map...
  130. [ 0.000000] Booting Linux on physical CPU 0x0
  131. [ 0.000000] Linux version 4.14.0-49.13.1.el7a.aarch64 ([email protected]) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-28) (GCC)) #1 SMP Thu Sep 27 14:45:52 UTC 2018
  132. [ 0.000000] Boot CPU: AArch64 Processor [410fd081]
  133. [ 0.000000] Machine model: Marvell 8040 MACCHIATOBin
  134. [ 0.000000] efi: Getting EFI parameters from FDT:
  135. [ 0.000000] efi: EFI v2.70 by EDK II
  136. [ 0.000000] efi: ACPI 2.0=0xb6760000 MEMATTR=0xbc372018 ESRT=0xbe82f618 RNG=0xbffdc998
  137. [ 0.000000] random: fast init done
  138. [ 0.000000] efi: seeding entropy pool
  139. [ 0.000000] esrt: Reserving ESRT space from 0x00000000be82f618 to 0x00000000be82f650.
  140. [ 0.000000] crashkernel reserved: 0x0000000094200000 - 0x00000000b4200000 (512 MB)
  141. [ 0.000000] ACPI: Early table checksum verification disabled
  142. [ 0.000000] ACPI: RSDP 0x00000000B6760000 000024 (v02 MVEBU )
  143. [ 0.000000] ACPI: XSDT 0x00000000B6750000 000054 (v01 MVEBU ARMADA8K 00000000 01000013)
  144. [ 0.000000] ACPI: FACP 0x00000000B6720000 000114 (v06 MVEBU ARMADA8K 00000000 LNRO 00000000)
  145. [ 0.000000] ACPI: DSDT 0x00000000B6740000 000942 (v02 MVEBU ARMADA8K 00000003 INTL 20160108)
  146. [ 0.000000] ACPI: MCFG 0x00000000B6730000 00003C (v01 MVEBU ARMADA8K 00000000 LNRO 00000000)
  147. [ 0.000000] ACPI: GTDT 0x00000000B6710000 00007C (v02 MVEBU ARMADA8K 00000000 LNRO 00000000)
  148. [ 0.000000] ACPI: APIC 0x00000000B6700000 0001E4 (v04 MVEBU ARMADA8K 00000000 LNRO 00000000)
  149. [ 0.000000] ACPI: PPTT 0x00000000B66F0000 0001E4 (v01 MVEBU ARMADA8K 00000000 LNRO 00000000)
  150. [ 0.000000] ACPI: SPCR 0x00000000B66E0000 000050 (v02 MVEBU ARMADA8K 00000000 LNRO 00000000)
  151. [ 0.000000] ACPI: NUMA: Failed to initialise from firmware
  152. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
  153. [ 0.000000] NUMA: NODE_DATA [mem 0x43fffe500-0x43fffffff]
  154. [ 0.000000] Zone ranges:
  155. [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
  156. [ 0.000000] Normal [mem 0x0000000100000000-0x000000043fffffff]
  157. [ 0.000000] Movable zone start for each node
  158. [ 0.000000] Early memory node ranges
  159. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  160. [ 0.000000] node 0: [mem 0x0000000005400000-0x00000000b66dffff]
  161. [ 0.000000] node 0: [mem 0x00000000b66e0000-0x00000000b676ffff]
  162. [ 0.000000] node 0: [mem 0x00000000b6770000-0x00000000bf80ffff]
  163. [ 0.000000] node 0: [mem 0x00000000bf810000-0x00000000bfbeffff]
  164. [ 0.000000] node 0: [mem 0x00000000bfbf0000-0x00000000bfc9ffff]
  165. [ 0.000000] node 0: [mem 0x00000000bfca0000-0x00000000bffdffff]
  166. [ 0.000000] node 0: [mem 0x00000000bffe0000-0x00000000bfffffff]
  167. [ 0.000000] node 0: [mem 0x0000000100000000-0x000000043fffffff]
  168. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000043fffffff]
  169. [ 0.000000] psci: probing for conduit method from ACPI.
  170. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  171. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  172. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  173. [ 0.000000] psci: SMC Calling Convention v1.1
  174. [ 0.000000] percpu: Embedded 3 pages/cpu @ffff80043fea0000 s124184 r8192 d64232 u196608
  175. [ 0.000000] Detected PIPT I-cache on CPU0
  176. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 261568
  177. [ 0.000000] Policy zone: Normal
  178. [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.14.0-49.13.1.el7a.aarch64 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap console=ttyS0,115200 LANG=en_US.UTF-8
  179. [ 0.000000] PID hash table entries: 4096 (order: -1, 32768 bytes)
  180. [ 0.000000] software IO TLB [mem 0xb8370000-0xbc370000] (64MB) mapped at [ffff8000b8370000-ffff8000bc36ffff]
  181. [ 0.000000] Memory: 16096192K/16756736K available (8060K kernel code, 1818K rwdata, 3392K rodata, 1280K init, 7738K bss, 660544K reserved, 0K cma-reserved)
  182. [ 0.000000] Virtual kernel memory layout:
  183. [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
  184. [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7bdfffff0000 (126847 GB)
  185. [ 0.000000] .text : 0xffff000008080000 - 0xffff000008860000 ( 8064 KB)
  186. [ 0.000000] .rodata : 0xffff000008860000 - 0xffff000008bc0000 ( 3456 KB)
  187. [ 0.000000] .init : 0xffff000008bc0000 - 0xffff000008d00000 ( 1280 KB)
  188. [ 0.000000] .data : 0xffff000008d00000 - 0xffff000008ec6a00 ( 1819 KB)
  189. [ 0.000000] .bss : 0xffff000008ec6a00 - 0xffff000009655598 ( 7739 KB)
  190. [ 0.000000] fixed : 0xffff7fdffe790000 - 0xffff7fdffec00000 ( 4544 KB)
  191. [ 0.000000] PCI I/O : 0xffff7fdffee00000 - 0xffff7fdfffe00000 ( 16 MB)
  192. [ 0.000000] vmemmap : 0xffff7fe000000000 - 0xffff800000000000 ( 128 GB maximum)
  193. [ 0.000000] 0xffff7fe000000000 - 0xffff7fe001100000 ( 17 MB actual)
  194. [ 0.000000] memory : 0xffff800000000000 - 0xffff800440000000 ( 17408 MB)
  195. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  196. [ 0.000000] ftrace: allocating 30104 entries in 8 pages
  197. [ 0.000000] Hierarchical RCU implementation.
  198. [ 0.000000] RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=4.
  199. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  200. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  201. [ 0.000000] GIC: Using split EOI/Deactivate mode
  202. [ 0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191]
  203. [ 0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223]
  204. [ 0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255]
  205. [ 0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287]
  206. [ 0.000000] Offload RCU callbacks from CPUs: .
  207. [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
  208. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
  209. [ 0.000001] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
  210. [ 0.000042] Console: colour dummy device 80x25
  211. [ 0.000081] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
  212. [ 0.000086] pid_max: default: 32768 minimum: 301
  213. [ 0.000103] ACPI: Core revision 20170728
  214. [ 0.000506] ACPI: 1 ACPI AML tables successfully acquired and loaded
  215. [ 0.000539] Security Framework initialized
  216. [ 0.000544] SELinux: Initializing.
  217. [ 0.001882] Dentry cache hash table entries: 2097152 (order: 8, 16777216 bytes)
  218. [ 0.002525] Inode-cache hash table entries: 1048576 (order: 7, 8388608 bytes)
  219. [ 0.002553] Mount-cache hash table entries: 32768 (order: 2, 262144 bytes)
  220. [ 0.002576] Mountpoint-cache hash table entries: 32768 (order: 2, 262144 bytes)
  221. [ 0.003139] ASID allocator initialised with 32768 entries
  222. [ 0.003169] Hierarchical SRCU implementation.
  223. [ 0.003662] Remapping and enabling EFI services.
  224. [ 0.003687] EFI remap 0x00000000bf810000 => 0000000020000000
  225. [ 0.003693] EFI remap 0x00000000bfca0000 => 00000000203e0000
  226. [ 0.003696] EFI remap 0x00000000f4284000 => 0000000020724000
  227. [ 0.003698] EFI remap 0x00000000f4700000 => 0000000020730000
  228. [ 0.003701] EFI remap 0x00000000f93c0000 => 0000000020740000
  229. [ 0.003825] smp: Bringing up secondary CPUs ...
  230. [ 0.004117] Detected PIPT I-cache on CPU1
  231. [ 0.004147] CPU1: Booted secondary processor [410fd081]
  232. [ 0.004468] Detected PIPT I-cache on CPU2
  233. [ 0.004491] CPU2: Booted secondary processor [410fd081]
  234. [ 0.004816] Detected PIPT I-cache on CPU3
  235. [ 0.004831] CPU3: Booted secondary processor [410fd081]
  236. [ 0.004876] smp: Brought up 1 node, 4 CPUs
  237. [ 0.004884] SMP: Total of 4 processors activated.
  238. [ 0.004888] CPU features: detected feature: 32-bit EL0 Support
  239. [ 0.004891] CPU features: detected feature: Kernel page table isolation (KPTI)
  240. [ 0.004982] CPU: All CPU(s) started at EL2
  241. [ 0.004992] alternatives: patching kernel code
  242. [ 0.005586] devtmpfs: initialized
  243. [ 0.005913] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  244. [ 0.005926] futex hash table entries: 1024 (order: 1, 131072 bytes)
  245. [ 0.006035] pinctrl core: initialized pinctrl subsystem
  246. [ 0.006101] DMI not present or invalid.
  247. [ 0.006218] NET: Registered protocol family 16
  248. [ 0.006495] cpuidle: using governor menu
  249. [ 0.006569] vdso: 2 pages (1 code @ ffff000008870000, 1 data @ ffff000008d20000)
  250. [ 0.006574] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  251. [ 0.006703] DMA: preallocated 256 KiB pool for atomic allocations
  252. [ 0.006719] ACPI: bus type PCI registered
  253. [ 0.006722] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  254. [ 0.006777] Serial: AMBA PL011 UART driver
  255. [ 0.008614] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  256. [ 0.008618] HugeTLB registered 512 MiB page size, pre-allocated 0 pages
  257. [ 0.009233] ACPI: Added _OSI(Module Device)
  258. [ 0.009237] ACPI: Added _OSI(Processor Device)
  259. [ 0.009240] ACPI: Added _OSI(3.0 _SCP Extensions)
  260. [ 0.009243] ACPI: Added _OSI(Processor Aggregator Device)
  261. [ 0.010205] ACPI: Interpreter enabled
  262. [ 0.010210] ACPI: Using GIC for interrupt routing
  263. [ 0.010228] ACPI: MCFG table detected, 1 entries
  264. [ 0.012191] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00])
  265. [ 0.012200] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  266. [ 0.012433] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
  267. [ 0.012697] acpi PNP0A08:00: ECAM area [mem 0xe0008000-0xe0107fff] reserved by PNP0C02:00
  268. [ 0.012705] acpi PNP0A08:00: ECAM at [mem 0xe0008000-0xe0107fff] for [bus 00]
  269. [ 0.012733] Remapped I/O 0x00000000eff00000 to [io 0x0000-0xffff window]
  270. [ 0.012866] PCI host bridge to bus 0000:00
  271. [ 0.012870] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
  272. [ 0.012874] pci_bus 0000:00: root bus resource [mem 0x800000000-0x8ffffffff window]
  273. [ 0.012877] pci_bus 0000:00: root bus resource [io 0x0000-0xffff window]
  274. [ 0.012880] pci_bus 0000:00: root bus resource [bus 00]
  275. [ 0.013276] pci 0000:00:00.0: BAR 1: assigned [mem 0xc0000000-0xc007ffff]
  276. [ 0.013284] pci 0000:00:00.0: BAR 6: assigned [mem 0xc0080000-0xc00bffff pref]
  277. [ 0.013287] pci 0000:00:00.0: BAR 0: assigned [mem 0xc00c0000-0xc00dffff]
  278. [ 0.013294] pci 0000:00:00.0: BAR 3: assigned [mem 0xc00e0000-0xc00e3fff]
  279. [ 0.013301] pci 0000:00:00.0: BAR 2: assigned [io 0x1000-0x101f]
  280. [ 0.013444] vgaarb: loaded
  281. [ 0.013605] SCSI subsystem initialized
  282. [ 0.013706] ACPI: bus type USB registered
  283. [ 0.013732] usbcore: registered new interface driver usbfs
  284. [ 0.013744] usbcore: registered new interface driver hub
  285. [ 0.013770] usbcore: registered new device driver usb
  286. [ 0.013844] EDAC MC: Ver: 3.0.0
  287. [ 0.013929] dmi: Firmware registration failed.
  288. [ 0.013934] Registered efivars operations
  289. [ 0.014530] NetLabel: Initializing
  290. [ 0.014533] NetLabel: domain hash size = 128
  291. [ 0.014536] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  292. [ 0.014559] NetLabel: unlabeled traffic allowed by default
  293. [ 0.014673] clocksource: Switched to clocksource arch_sys_counter
  294. [ 0.030274] VFS: Disk quotas dquot_6.6.0
  295. [ 0.030311] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
  296. [ 0.030459] pnp: PnP ACPI init
  297. [ 0.030595] system 00:00: [mem 0xe0008000-0xf0007fff] could not be reserved
  298. [ 0.030612] pnp: PnP ACPI: found 1 devices
  299. [ 0.032775] NET: Registered protocol family 2
  300. [ 0.032989] TCP established hash table entries: 131072 (order: 4, 1048576 bytes)
  301. [ 0.033396] TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
  302. [ 0.033828] TCP: Hash tables configured (established 131072 bind 65536)
  303. [ 0.033877] UDP hash table entries: 8192 (order: 2, 262144 bytes)
  304. [ 0.034039] UDP-Lite hash table entries: 8192 (order: 2, 262144 bytes)
  305. [ 0.034276] NET: Registered protocol family 1
  306. [ 0.034385] Unpacking initramfs...
  307. [ 0.421834] Freeing initrd memory: 19520K
  308. [ 0.422024] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
  309. [ 0.422040] kvm [1]: 8-bit VMID
  310. [ 0.422043] kvm [1]: IDMAP page: 82c000
  311. [ 0.422046] kvm [1]: HYP VA range: 800000000000:ffffffffffff
  312. [ 0.422167] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
  313. [ 0.422177] kvm [1]: vgic-v2@f0240000
  314. [ 0.422221] kvm [1]: vgic interrupt IRQ1
  315. [ 0.422227] kvm [1]: virtual timer IRQ3
  316. [ 0.422274] kvm [1]: Hyp mode initialized successfully
  317. [ 0.449124] audit: initializing netlink subsys (disabled)
  318. [ 0.449204] audit: type=2000 audit(0.440:1): state=initialized audit_enabled=0 res=1
  319. [ 0.449345] Initialise system trusted keyrings
  320. [ 0.449397] workingset: timestamp_bits=44 max_order=18 bucket_order=0
  321. [ 0.451067] zbud: loaded
  322. [ 0.506229] NET: Registered protocol family 38
  323. [ 0.506237] Key type asymmetric registered
  324. [ 0.506240] Asymmetric key parser 'x509' registered
  325. [ 0.506315] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  326. [ 0.506365] io scheduler noop registered
  327. [ 0.506369] io scheduler deadline registered (default)
  328. [ 0.506432] io scheduler cfq registered
  329. [ 0.506434] io scheduler mq-deadline registered
  330. [ 0.506436] io scheduler kyber registered
  331. [ 0.506530] atomic64_test: passed
  332. [ 0.507045] ACPI GTDT: found 1 SBSA generic Watchdog(s).
  333. [ 0.507190] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  334. [ 0.507608] console [ttyS0] disabled
  335. [ 0.527742] HISI0031:00: ttyS0 at MMIO 0xf0512000 (irq = 10, base_baud = 12500000) is a 16550A
  336. [ 1.743922] console [ttyS0] enabled
  337. [ 1.747887] rdac: device handler registered
  338. [ 1.752146] hp_sw: device handler registered
  339. [ 1.756441] emc: device handler registered
  340. [ 1.760592] alua: device handler registered
  341. [ 1.764953] libphy: Fixed MDIO Bus: probed
  342. [ 1.769124] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  343. [ 1.775685] ehci-pci: EHCI PCI platform driver
  344. [ 1.780159] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  345. [ 1.786378] ohci-pci: OHCI PCI platform driver
  346. [ 1.790848] uhci_hcd: USB Universal Host Controller Interface driver
  347. [ 1.797308] xhci-hcd PNP0D10:00: xHCI Host Controller
  348. [ 1.802431] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 1
  349. [ 1.809780] xhci-hcd PNP0D10:00: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  350. [ 1.818101] xhci-hcd PNP0D10:00: irq 7, io mem 0xf2500000
  351. [ 1.823576] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  352. [ 1.830396] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  353. [ 1.837652] usb usb1: Product: xHCI Host Controller
  354. [ 1.842548] usb usb1: Manufacturer: Linux 4.14.0-49.13.1.el7a.aarch64 xhci-hcd
  355. [ 1.849802] usb usb1: SerialNumber: PNP0D10:00
  356. [ 1.854405] hub 1-0:1.0: USB hub found
  357. [ 1.858183] hub 1-0:1.0: 1 port detected
  358. [ 1.862222] xhci-hcd PNP0D10:00: xHCI Host Controller
  359. [ 1.867345] xhci-hcd PNP0D10:00: new USB bus registered, assigned bus number 2
  360. [ 1.874616] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  361. [ 1.882776] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  362. [ 1.889595] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  363. [ 1.896849] usb usb2: Product: xHCI Host Controller
  364. [ 1.901745] usb usb2: Manufacturer: Linux 4.14.0-49.13.1.el7a.aarch64 xhci-hcd
  365. [ 1.909000] usb usb2: SerialNumber: PNP0D10:00
  366. [ 1.913574] hub 2-0:1.0: USB hub found
  367. [ 1.917350] hub 2-0:1.0: 1 port detected
  368. [ 1.921396] xhci-hcd PNP0D10:01: xHCI Host Controller
  369. [ 1.926521] xhci-hcd PNP0D10:01: new USB bus registered, assigned bus number 3
  370. [ 1.933852] xhci-hcd PNP0D10:01: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  371. [ 1.942178] xhci-hcd PNP0D10:01: irq 8, io mem 0xf2510000
  372. [ 1.947647] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  373. [ 1.954462] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  374. [ 1.961720] usb usb3: Product: xHCI Host Controller
  375. [ 1.966622] usb usb3: Manufacturer: Linux 4.14.0-49.13.1.el7a.aarch64 xhci-hcd
  376. [ 1.973873] usb usb3: SerialNumber: PNP0D10:01
  377. [ 1.978495] hub 3-0:1.0: USB hub found
  378. [ 1.982266] hub 3-0:1.0: 1 port detected
  379. [ 1.986292] xhci-hcd PNP0D10:01: xHCI Host Controller
  380. [ 1.991407] xhci-hcd PNP0D10:01: new USB bus registered, assigned bus number 4
  381. [ 1.998692] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  382. [ 2.006849] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  383. [ 2.013665] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  384. [ 2.020919] usb usb4: Product: xHCI Host Controller
  385. [ 2.025821] usb usb4: Manufacturer: Linux 4.14.0-49.13.1.el7a.aarch64 xhci-hcd
  386. [ 2.033071] usb usb4: SerialNumber: PNP0D10:01
  387. [ 2.037684] hub 4-0:1.0: USB hub found
  388. [ 2.041455] hub 4-0:1.0: 1 port detected
  389. [ 2.045508] xhci-hcd PNP0D10:02: xHCI Host Controller
  390. [ 2.050628] xhci-hcd PNP0D10:02: new USB bus registered, assigned bus number 5
  391. [ 2.057971] xhci-hcd PNP0D10:02: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
  392. [ 2.066289] xhci-hcd PNP0D10:02: irq 9, io mem 0xf4500000
  393. [ 2.071754] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  394. [ 2.078576] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  395. [ 2.085832] usb usb5: Product: xHCI Host Controller
  396. [ 2.090728] usb usb5: Manufacturer: Linux 4.14.0-49.13.1.el7a.aarch64 xhci-hcd
  397. [ 2.097985] usb usb5: SerialNumber: PNP0D10:02
  398. [ 2.102602] hub 5-0:1.0: USB hub found
  399. [ 2.106379] hub 5-0:1.0: 1 port detected
  400. [ 2.110392] xhci-hcd PNP0D10:02: xHCI Host Controller
  401. [ 2.115514] xhci-hcd PNP0D10:02: new USB bus registered, assigned bus number 6
  402. [ 2.122785] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  403. [ 2.130944] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
  404. [ 2.137763] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  405. [ 2.145016] usb usb6: Product: xHCI Host Controller
  406. [ 2.149912] usb usb6: Manufacturer: Linux 4.14.0-49.13.1.el7a.aarch64 xhci-hcd
  407. [ 2.157169] usb usb6: SerialNumber: PNP0D10:02
  408. [ 2.161770] hub 6-0:1.0: USB hub found
  409. [ 2.165545] hub 6-0:1.0: 1 port detected
  410. [ 2.169611] usbcore: registered new interface driver usbserial
  411. [ 2.175480] usbcore: registered new interface driver usbserial_generic
  412. [ 2.182040] usbserial: USB Serial support registered for generic
  413. [ 2.188135] mousedev: PS/2 mouse device common for all mice
  414. [ 2.193863] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
  415. [ 2.200088] dmi-sysfs: dmi entry is absent.
  416. [ 2.204287] EFI Variables Facility v0.08 2004-May-17
  417. [ 2.209903] hidraw: raw HID events driver (C) Jiri Kosina
  418. [ 2.215455] usbcore: registered new interface driver usbhid
  419. [ 2.221048] usbhid: USB HID core driver
  420. [ 2.224974] drop_monitor: Initializing network drop monitor service
  421. [ 2.231340] Initializing XFRM netlink socket
  422. [ 2.235763] NET: Registered protocol family 10
  423. [ 2.240480] Segment Routing with IPv6
  424. [ 2.244175] NET: Registered protocol family 17
  425. [ 2.248882] registered taskstats version 1
  426. [ 2.252999] Loading compiled-in X.509 certificates
  427. [ 2.309525] Loaded X.509 cert 'CentOS Linux kernel signing key: c70a568496a49bd9e2518f1f432190611f5394e2'
  428. [ 2.319160] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
  429. [ 2.329395] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
  430. [ 2.339042] zswap: loaded using pool lzo/zbud
  431. [ 2.346520] Key type big_key registered
  432. [ 2.350458] rtc-efi rtc-efi: setting system clock to 2019-05-09 09:00:13 UTC (1557392413)
  433. [ 2.358687] usb 3-1: new high-speed USB device number 2 using xhci-hcd
  434. [ 2.367788] Freeing unused kernel memory: 1280K
  435. [ 2.381630] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  436. [ 2.399828] systemd[1]: Detected architecture arm64.
  437. [ 2.404830] systemd[1]: Running in initial RAM disk.
  438.  
  439. Welcome to CentOS Linux 7 (AltArch) dracut-033-535.el7_5.1 (Initramfs)!
  440.  
  441. [ 2.444742] systemd[1]: Set hostname to <localhost.localdomain>.
  442. [ OK ] Reached target Timers.
  443. [ 2.534718] systemd[1]: Reached target Timers.
  444. [ 2.539195] systemd[1]: Starting Timers.
  445. [ OK ] Reached target[ 2.545233] usb 3-1: New USB device found, idVendor=125f, idProduct=db8a
  446. Local File Syst[ 2.552689] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  447. ems.
  448. [ 2.561252] usb 3-1: Product: ADATA USB Flash Drive
  449. [ 2.566678] usb 3-1: Manufacturer: ADATA
  450. [ 2.566695] systemd[1]: Reached target Local File Systems.
  451. [ 2.566709] systemd[1]: Starting Local File Systems.
  452. [ 2.581107] usb 3-1: SerialNumber: 2661510440170255
  453. [ OK ] Reached target Swap.
  454. [ 2.614698] systemd[1]: Reached target Swap.
  455. [ 2.618996] systemd[1]: Starting Swap.
  456. [ OK ] Created slice Root Slice.
  457. [ OK ] Listening on Journal Socket.
  458. [ OK ] Listening on udev Kernel Socket.
  459. [ OK ] Created slice System Slice.
  460. Starting Journal Service...
  461. Starting Create list of required st... nodes for the current kernel...
  462. Starting Apply Kernel Variables...
  463. Starting Setup Virtual Console...
  464. Starting dracut cmdline hook...
  465. [ OK ] Listening on udev Control Socket.
  466. [ OK ] Reached target Sockets.
  467. [ OK ] Reached target Slices.
  468. [ OK ] Started Journal Service.
  469. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  470. [ OK ] Started Apply Kernel Variables.
  471. [ OK ] Started Setup Virtual Console.
  472. [ OK ] Started dracut cmdline hook.
  473. Starting dracut pre-udev hook...
  474. [ 3.160663] device-mapper: uevent: version 1.0.3
  475. [ 3.165461] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
  476. Starting Create Static Device Nodes in /dev...
  477. [ OK ] Started Create Static Device Nodes in /dev.
  478. [ OK ] Started dracut pre-udev hook.
  479. Starting udev Kernel Device Manager...
  480. [ OK ] Started udev Kernel Device Manager.
  481. Starting udev Coldplug all Devices...
  482. Mounting Configuration File System...
  483. [ 3.397856] ahci LNRO001E:00: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  484. [ 3.406297] ahci LNRO001E:00: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  485. [ OK [ 3.416381] usb-storage 3-1:1.0: USB Mass Storage device detected
  486. ] Mounted Config[ 3.417669] scsi host0: ahci
  487. uration File Sys[ 3.417888] scsi host1: ahci
  488. [ 3.417965] ata1: SATA max UDMA/133 mmio [mem 0xf2540000-0xf2541fff] port 0x100 irq 5
  489. tem.
  490. [ 3.417967] ata2: SATA max UDMA/133 mmio [mem 0xf2540000-0xf2541fff] port 0x180 irq 5
  491. [ 3.418099] ahci LNRO001E:01: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  492. [ 3.418103] ahci LNRO001E:01: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
  493. [ 3.418680] pps_core: LinuxPPS API ver. 1 registered
  494. [ 3.418682] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  495. [ 3.418865] scsi host2: ahci
  496. [ 3.419961] scsi host3: ahci
  497. [ 3.420042] ata3: SATA max UDMA/133 mmio [mem 0xf4540000-0xf4541fff] port 0x100 irq 6
  498. [ 3.420045] ata4: SATA max UDMA/133 mmio [mem 0xf4540000-0xf4541fff] port 0x180 irq 6
  499. [ 3.420789] PTP clock support registered
  500. [ 3.429689] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  501. [ 3.429691] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  502. [ 3.429791] e1000e 0000:00:00.0: enabling device (0000 -> 0002)
  503. [ 3.430218] e1000e 0000:00:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  504. [ 3.436079] mvpp2 MRVL0110:00 eth0: Using random mac address 4a:30:4b:c8:86:e4
  505. [ 3.441541] mvpp2 MRVL0110:01 eth1: Using random mac address e6:aa:8c:63:0a:9d
  506. [ 3.448055] mvpp2 MRVL0110:01 eth2: Using random mac address 16:69:5b:7c:83:bb
  507. [ 3.505134] e1000e 0000:00:00.0 0000:00:00.0 (uninitialized): registered PHC clock
  508. [ 3.560863] scsi host4: usb-storage 3-1:1.0
  509. [ OK [ 3.565696] usbcore: registered new interface driver usb-storage
  510. ] Started udev C[ 3.571057] e1000e 0000:00:00.0 eth3: (PCI Express:2.5GT/s:Width x1) 00:1b:21:62:f9:38
  511. oldplug all Devi[ 3.571060] e1000e 0000:00:00.0 eth3: Intel(R) PRO/1000 Network Connection
  512. [ 3.571073] e1000e 0000:00:00.0 eth3: MAC: 3, PHY: 8, PBA No: E25867-006
  513. ces.
  514. [ 3.582952] e1000e 0000:00:00.0 enp0s0: renamed from eth3
  515. [ 3.604837] usbcore: registered new interface driver uas
  516. Starting dracut initqueue hook...
  517. Starting Show Plymouth Boot Screen...
  518. [ OK ] Reached target System Initialization.
  519. [ OK ] Started Show Plymouth Boot Screen.
  520. [ OK ] Reached target Paths.
  521. [ OK ] Reached target Basic System.
  522. [ 3.746487] ata1: SATA link down (SStatus 0 SControl 300)
  523. [ 3.914689] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  524. [ 3.914692] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  525. [ 3.914708] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  526. [ 3.927134] ata3.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
  527. [ 3.927136] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
  528. [ 3.947074] ata3.00: configured for UDMA/133
  529. [ 3.948024] ata2.00: ATA-8: WDC WD3200BEKX-75B7WT0, 01.01A01, max UDMA/133
  530. [ 3.948026] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
  531. [ 3.949040] ata2.00: configured for UDMA/133
  532. [ 3.949188] scsi 1:0:0:0: Direct-Access ATA WDC WD3200BEKX-7 1A01 PQ: 0 ANSI: 5
  533. [ 3.950106] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
  534. [ 3.950124] sd 1:0:0:0: [sda] Write Protect is off
  535. [ 3.950155] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  536. [ 3.999071] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
  537. [ 4.007490] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  538. [ 4.015062] sd 2:0:0:0: [sdb] Write Protect is off
  539. [ 4.019899] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  540. [ 4.070967] sdb: sdb1 sdb2 sdb3
  541. [ 4.074639] sd 2:0:0:0: [sdb] Attached SCSI removable disk
  542. [ 4.258100] GPT:Primary header thinks Alt. header is not at the end of the disk.
  543. [ 4.265539] GPT:2056924 != 625142447
  544. [ 4.269126] GPT:Alternate GPT header not at the end of the disk.
  545. [ 4.275165] GPT:2056924 != 625142447
  546. [ 4.278752] GPT: Use GNU Parted to correct GPT errors.
  547. [ 4.283913] sda: sda1 sda2
  548. [ 4.287277] sd 1:0:0:0: [sda] Attached SCSI removable disk
  549. [ 4.634947] scsi 4:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6
  550. [ 4.643629] sd 4:0:0:0: [sdc] 15155200 512-byte logical blocks: (7.76 GB/7.23 GiB)
  551. [ 4.651424] sd 4:0:0:0: [sdc] Write Protect is off
  552. [ 4.656382] sd 4:0:0:0: [sdc] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
  553. [ 4.668783] sdc: sdc1 sdc2
  554. [ 4.672339] sd 4:0:0:0: [sdc] Attached SCSI removable disk
  555. [ OK ] Found device /dev/mapper/centos-root.
  556. Starting File System Check on /dev/mapper/centos-root...
  557. [ OK ] Started File System Check on /dev/mapper/centos-root.
  558. [ OK ] Started dracut initqueue hook.
  559. Mounting /sysroot...
  560. [ OK ] Reached target Remote File Systems (Pre).
  561. [ OK ] Reached target Remote File Systems.
  562. [ 5.043852] SGI XFS with ACLs, security attributes, no debug enabled
  563. [ 5.052269] XFS (dm-0): Mounting V5 Filesystem
  564. [ 5.273394] XFS (dm-0): Ending clean mount
  565. [ OK ] Mounted /sysroot.
  566. [ OK ] Reached target Initrd Root File System.
  567. Starting Reload Configuration from the Real Root...
  568. [ OK ] Started Reload Configuration from the Real Root.
  569. [ OK ] Reached target Initrd File Systems.
  570. [ OK ] Reached target Initrd Default Target.
  571. Starting dracut pre-pivot and cleanup hook...
  572. [ OK ] Started dracut pre-pivot and cleanup hook.
  573. Starting Cleaning Up and Shutting Down Daemons...
  574. Starting Plymouth switch root service...
  575. [ OK ] Stopped target Timers.
  576. [ OK ] Stopped Cleaning Up and Shutting Down Daemons.
  577. [ OK ] Stopped dracut pre-pivot and cleanup hook.
  578. Stopping dracut pre-pivot and cleanup hook...
  579. [ OK ] Stopped target Initrd Default Target.
  580. [ OK ] Stopped target Basic System.
  581. [ OK ] Stopped target Paths.
  582. [ OK ] Stopped target Sockets.
  583. [ OK ] Stopped target Slices.
  584. [ OK ] Stopped target System Initialization.
  585. [ OK ] Stopped target Local File Systems.
  586. Stopping udev Kernel Device Manager...
  587. [ OK ] Stopped Apply Kernel Variables.
  588. Stopping Apply Kernel Variables...
  589. [ OK ] Stopped target Swap.
  590. [ OK ] Stopped target Remote File Systems.
  591. [ OK ] Stopped target Remote File Systems (Pre).
  592. [ OK ] Stopped dracut initqueue hook.
  593. Stopping dracut initqueue hook...
  594. [ OK ] Stopped udev Coldplug all Devices.
  595. Stopping udev Coldplug all Devices...
  596. [ OK ] Started Plymouth switch root service.
  597. [ OK ] Stopped udev Kernel Device Manager.
  598. [ OK ] Stopped Create Static Device Nodes in /dev.
  599. Stopping Create Static Device Nodes in /dev...
  600. [ OK ] Stopped Create list of required sta...ce nodes for the current kernel.
  601. Stopping Create list of required st... nodes for the current kernel...
  602. [ OK ] Stopped dracut pre-udev hook.
  603. Stopping dracut pre-udev hook...
  604. [ OK ] Stopped dracut cmdline hook.
  605. Stopping dracut cmdline hook...
  606. [ OK ] Closed udev Control Socket.
  607. [ OK ] Closed udev Kernel Socket.
  608. Starting Cleanup udevd DB...
  609. [ OK ] Started Cleanup udevd DB.
  610. [ OK ] Reached target Switch Root.
  611. Starting Switch Root...
  612. [ 5.860929] systemd-journald[193]: Received SIGTERM from PID 1 (systemd).
  613. [ 5.960818] systemd: 20 output lines suppressed due to ratelimiting
  614. [ 6.255164] audit: type=1404 audit(1557392417.400:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  615. [ 6.528250] SELinux: Permission getrlimit in class process not defined in policy.
  616. [ 6.535886] SELinux: Permission map in class file not defined in policy.
  617. [ 6.542705] SELinux: Permission map in class dir not defined in policy.
  618. [ 6.549441] SELinux: Permission map in class lnk_file not defined in policy.
  619. [ 6.556610] SELinux: Permission map in class chr_file not defined in policy.
  620. [ 6.563776] SELinux: Permission map in class blk_file not defined in policy.
  621. [ 6.570945] SELinux: Permission map in class sock_file not defined in policy.
  622. [ 6.578199] SELinux: Permission map in class fifo_file not defined in policy.
  623. [ 6.585457] SELinux: Permission map in class socket not defined in policy.
  624. [ 6.592450] SELinux: Permission map in class tcp_socket not defined in policy.
  625. [ 6.599795] SELinux: Permission map in class udp_socket not defined in policy.
  626. [ 6.607137] SELinux: Permission map in class rawip_socket not defined in policy.
  627. [ 6.614653] SELinux: Permission map in class netlink_socket not defined in policy.
  628. [ 6.622349] SELinux: Permission map in class packet_socket not defined in policy.
  629. [ 6.629953] SELinux: Permission map in class key_socket not defined in policy.
  630. [ 6.637297] SELinux: Permission map in class unix_stream_socket not defined in policy.
  631. [ 6.645337] SELinux: Permission map in class unix_dgram_socket not defined in policy.
  632. [ 6.653295] SELinux: Permission map in class netlink_route_socket not defined in policy.
  633. [ 6.661510] SELinux: Permission map in class netlink_tcpdiag_socket not defined in policy.
  634. [ 6.669900] SELinux: Permission map in class netlink_nflog_socket not defined in policy.
  635. [ 6.678114] SELinux: Permission map in class netlink_xfrm_socket not defined in policy.
  636. [ 6.686242] SELinux: Permission map in class netlink_selinux_socket not defined in policy.
  637. [ 6.694628] SELinux: Permission map in class netlink_iscsi_socket not defined in policy.
  638. [ 6.702842] SELinux: Permission map in class netlink_audit_socket not defined in policy.
  639. [ 6.711058] SELinux: Permission map in class netlink_fib_lookup_socket not defined in policy.
  640. [ 6.719709] SELinux: Permission map in class netlink_connector_socket not defined in policy.
  641. [ 6.728272] SELinux: Permission map in class netlink_netfilter_socket not defined in policy.
  642. [ 6.736835] SELinux: Permission map in class netlink_dnrt_socket not defined in policy.
  643. [ 6.744965] SELinux: Permission map in class netlink_kobject_uevent_socket not defined in policy.
  644. [ 6.753961] SELinux: Permission map in class netlink_generic_socket not defined in policy.
  645. [ 6.762350] SELinux: Permission map in class netlink_scsitransport_socket not defined in policy.
  646. [ 6.771261] SELinux: Permission map in class netlink_rdma_socket not defined in policy.
  647. [ 6.779388] SELinux: Permission map in class netlink_crypto_socket not defined in policy.
  648. [ 6.787689] SELinux: Permission map in class appletalk_socket not defined in policy.
  649. [ 6.795557] SELinux: Permission map in class dccp_socket not defined in policy.
  650. [ 6.802987] SELinux: Permission map in class tun_socket not defined in policy.
  651. [ 6.810335] SELinux: Class sctp_socket not defined in policy.
  652. [ 6.816192] SELinux: Class icmp_socket not defined in policy.
  653. [ 6.822048] SELinux: Class ax25_socket not defined in policy.
  654. [ 6.827905] SELinux: Class ipx_socket not defined in policy.
  655. [ 6.833672] SELinux: Class netrom_socket not defined in policy.
  656. [ 6.839705] SELinux: Class atmpvc_socket not defined in policy.
  657. [ 6.845737] SELinux: Class x25_socket not defined in policy.
  658. [ 6.851505] SELinux: Class rose_socket not defined in policy.
  659. [ 6.857364] SELinux: Class decnet_socket not defined in policy.
  660. [ 6.863392] SELinux: Class atmsvc_socket not defined in policy.
  661. [ 6.869423] SELinux: Class rds_socket not defined in policy.
  662. [ 6.875200] SELinux: Class irda_socket not defined in policy.
  663. [ 6.881054] SELinux: Class pppox_socket not defined in policy.
  664. [ 6.887001] SELinux: Class llc_socket not defined in policy.
  665. [ 6.892769] SELinux: Class can_socket not defined in policy.
  666. [ 6.898541] SELinux: Class tipc_socket not defined in policy.
  667. [ 6.904396] SELinux: Class bluetooth_socket not defined in policy.
  668. [ 6.910690] SELinux: Class iucv_socket not defined in policy.
  669. [ 6.916548] SELinux: Class rxrpc_socket not defined in policy.
  670. [ 6.922491] SELinux: Class isdn_socket not defined in policy.
  671. [ 6.928350] SELinux: Class phonet_socket not defined in policy.
  672. [ 6.934379] SELinux: Class ieee802154_socket not defined in policy.
  673. [ 6.940760] SELinux: Class caif_socket not defined in policy.
  674. [ 6.946618] SELinux: Class alg_socket not defined in policy.
  675. [ 6.952385] SELinux: Class nfc_socket not defined in policy.
  676. [ 6.958156] SELinux: Class vsock_socket not defined in policy.
  677. [ 6.964098] SELinux: Class kcm_socket not defined in policy.
  678. [ 6.969869] SELinux: Class qipcrtr_socket not defined in policy.
  679. [ 6.975989] SELinux: Class smc_socket not defined in policy.
  680. [ 6.981757] SELinux: the above unknown classes and permissions will be allowed
  681. [ 6.989025] SELinux: policy capability network_peer_controls=1
  682. [ 6.994971] SELinux: policy capability open_perms=1
  683. [ 6.999954] SELinux: policy capability extended_socket_class=0
  684. [ 7.005901] SELinux: policy capability always_check_network=0
  685. [ 7.011755] SELinux: policy capability cgroup_seclabel=1
  686. [ 7.017177] SELinux: policy capability nnp_nosuid_transition=1
  687. [ 7.077598] audit: type=1403 audit(1557392418.220:3): policy loaded auid=4294967295 ses=4294967295
  688. [ 7.088111] systemd[1]: Successfully loaded SELinux policy in 840.544ms.
  689. [ 7.377306] ip_tables: (C) 2000-2006 Netfilter Core Team
  690. [ 7.382672] systemd[1]: Inserted module 'ip_tables'
  691. [ 7.432100] systemd[1]: Relabelled /dev and /run in 41.311ms.
  692.  
  693. Welcome to CentOS Linux 7 (AltArch)!
  694.  
  695. [ OK ] Stopped Switch Root.
  696. [ OK ] Stopped Journal Service.
  697. Starting Journal Service...
  698. [ OK ] Listening on LVM2 poll daemon socket.
  699. Mounting Debug File System...
  700. [ OK ] Listening on udev Kernel Socket.
  701. [ OK ] Reached target Remote File Systems.
  702. Starting Read and set NIS domainname from /etc/sysconfig/network...
  703. Mounting Huge Pages File System...
  704. Mounting POSIX Message Queue File System...
  705. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  706. [ OK ] Created slice system-getty.slice.
  707. Starting Create list of required st... nodes for the current kernel...
  708. [ OK ] Created slice system-serial\x2dgetty.slice.
  709. [ OK ] Listening on LVM2 metadata daemon socket.
  710. [ OK ] Created slice system-selinux\x2dpol...grate\x2dlocal\x2dchanges.slice.
  711. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
  712. [ OK ] Listening on Delayed Shutdown Socket.
  713. [ OK ] Listening on Device-mapper event daemon FIFOs.
  714. Starting Monitoring of LVM2 mirrors... dmeventd or progress polling...
  715. [ OK ] Listening on udev Control Socket.
  716. [ OK ] Reached target Paths.
  717. [ OK ] Created slice User and Session Slice.
  718. [ OK ] Reached target Slices.
  719. [ OK ] Reached target Local Encrypted Volumes.
  720. [ OK ] Stopped File System Check on Root Device.
  721. Stopping File System Check on Root Device...
  722. Starting Replay Read-Ahead Data...
  723. Starting Collect Read-Ahead Data...
  724. [ OK ] Stopped target Switch Root.
  725. [ OK ] Stopped target Initrd File Systems.
  726. [ OK ] Stopped target Initrd Root File System.
  727. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  728. [ OK ] Started Collect Read-Ahead Data.
  729. [ OK ] Started Replay Read-Ahead Data.
  730. Starting Remount Root and Kernel File Systems...
  731. Starting Create Static Device Nodes in /dev...
  732. Starting Apply Kernel Variables...
  733. [ OK ] Mounted Debug File System.
  734. [ OK ] Mounted POSIX Message Queue File System.
  735. [ OK ] Mounted Huge Pages File System.
  736. [ OK ] Started Remount Root and Kernel File Systems.
  737. Starting Configure read-only root support...
  738. Starting udev Coldplug all Devices...
  739. Starting Load/Save Random Seed...
  740. [ OK ] Started Journal Service.
  741. [ OK ] Started Read and set NIS domainname from /etc/sysconfig/network.
  742. Starting Flush Journal to Persistent Storage...
  743. [ OK ] Started Apply Kernel Variables.
  744. [ OK ] Started Load/Save Random Seed.
  745. [ OK ] Started udev Coldplug all Devices.
  746. [ OK ] Started Configure read-only root support.
  747. [ 9.461693] systemd-journald[587]: Received request to flush runtime journal from PID 1
  748. [ OK ] Started Create Static Device Nodes in /dev.
  749. Starting udev Kernel Device Manager...
  750. [ OK ] Started Flush Journal to Persistent Storage.
  751. [ OK ] Started LVM2 metadata daemon.
  752. Starting LVM2 metadata daemon...
  753. [ OK ] Started udev Kernel Device Manager.
  754. [ OK ] Found device /dev/ttyS0.
  755. [ 10.876068] sbsa-gwdt sbsa-gwdt.0: Initialized with 10s timeout @ 25000000 Hz, action=0.
  756. [ 10.918917] omap_rng PRP0001:00: Random Number Generator ver. 00
  757. [ 10.925122] omap_rng PRP0001:01: Random Number Generator ver. 00
  758. [ 11.222767] sd 1:0:0:0: Attached scsi generic sg0 type 0
  759. [ 11.228197] sd 2:0:0:0: Attached scsi generic sg1 type 0
  760. [ 11.233637] sd 4:0:0:0: Attached scsi generic sg2 type 0
  761. [ 12.093617] random: crng init done
  762. [ OK ] Found device WDC_WD5000AAKX-00ERMA0 EFI\x20System\x20Partition.
  763. [ OK ] Found device /dev/mapper/centos-swap.
  764. Activating swap /dev/mapper/centos-swap..[ 12.997107] Adding 8323008k swap on /dev/mapper/centos-swap. Priority:-2 extents:1 across:8323008k FS
  765. .
  766. [ OK ] Activated swap /dev/mapper/centos-swap.
  767. [ OK ] Reached target Swap.
  768. [ OK ] Created slice system-lvm2\x2dpvscan.slice.
  769. Starting LVM2 PV scan on device 8:19...
  770. [ OK ] Found device WDC_WD5000AAKX-00ERMA0 2.
  771. [ OK ] Started Monitoring of LVM2 mirrors,...ng dmeventd or progress polling.
  772. [ OK ] Reached target Local File Systems (Pre).
  773. Mounting /boot...
  774. [ 13.690917] XFS (sdb2): Mounting V5 Filesystem
  775. [ OK ] Found device /dev/mapper/centos-home.
  776. Mounting /home...
  777. [ O[ 15.720022] XFS (dm-2): Mounting V5 Filesystem
  778. K ] Started LVM2 PV scan on device 8:19.
  779. [ 15.814023] XFS (sdb2): Ending clean mount
  780. [ OK ] Mounted /boot.
  781. Mounting /boot/efi...
  782. [ OK ] Mounted /boot/efi.
  783. [ 16.114727] XFS (dm-2): Ending clean mount
  784. [ OK ] Mounted /home.
  785. [ OK ] Reached target Local File Systems.
  786. Starting Tell Plymouth To Write Out Runtime Data...
  787. Starting Import network configuration from initramfs...
  788. [ OK ] Started Tell Plymouth To Write Out Runtime Data.
  789. [ OK ] Started Import network configuration from initramfs.
  790. Starting Create Volatile Files and Directories...
  791. [ OK ] Started Create Volatile Files and Directories.
  792. Starting Security Auditing Service...
  793. [ OK ] Started Security Auditing Service.
  794. Starting Update UTMP about System Boot/Shutdown...
  795. [ OK ] Started Update UTMP about System Boot/Shutdown.
  796. [ OK ] Reached target System Initialization.
  797. [ OK ] Listening on D-Bus System Message Bus Socket.
  798. [ OK ] Reached target Sockets.
  799. [ OK ] Reached target Basic System.
  800. [ OK ] Started irqbalance daemon.
  801. Starting irqbalance daemon...
  802. Starting Dump dmesg to /var/log/dmesg...
  803. Starting Permit User Sessions...
  804. Starting Authorization Manager...
  805. Starting NTP client/server...
  806. Starting Login Service...
  807. [ OK ] Started D-Bus System Message Bus.
  808. Starting D-Bus System Message Bus...
  809. [ OK ] Reached target Timers.
  810. [ OK ] Started Dump dmesg to /var/log/dmesg.
  811. [ OK ] Started Permit User Sessions.
  812. Starting Wait for Plymouth Boot Screen to Quit...
  813. Starting Terminate Plymouth Boot Screen...
  814. [ OK ] Started Command Scheduler.
  815. Starting Command Scheduler...
  816. [ OK ] Started Login Service.
  817. [ 18.073189] ip6_tables: (C) 2000-2006 Netfilter Core Team
  818. [ 18.331593] Ebtables v2.0 registered
  819. [ 18.824059] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  820. [ 18.832150] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  821. [ 18.846593] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  822. [ 18.869404] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
  823. [ 18.877550] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
  824. [ 18.883443] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
  825. [ 18.895234] IPv6: ADDRCONF(NETDEV_UP): enp0s0: link is not ready
  826. [ 18.985043] IPv6: ADDRCONF(NETDEV_UP): enp0s0: link is not ready
  827. [ 19.417468] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
  828. [ 20.457444] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  829. [ 20.762589] Netfilter messages via NETLINK v0.30.
  830. [ 20.771042] ip_set: protocol 6
  831.  
  832. CentOS Linux 7 (AltArch)
  833. Kernel 4.14.0-49.13.1.el7a.aarch64 on an aarch64
  834.  
  835. localhost login: [ 22.955337] e1000e: enp0s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
  836. [ 22.963425] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s0: link becomes ready
  837.  
  838. CentOS Linux 7 (AltArch)
  839. Kernel 4.14.0-49.13.1.el7a.aarch64 on an aarch64
  840.  
  841. localhost login:
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!