U-Boot 2019.01-gd8747fd7ac (Nov 29 2019 - 18:24:46 +0000)

DRAM:  448 MiB
RPI Zero W (0x9000c1)
MMC:   sdhci@7e300000: 0
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Saving Environment to MMC... Writing to MMC(0)... OK
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
402 bytes read in 6 ms (65.4 KiB/s)
## Executing script at 02400000
switch to partitions #0, OK
mmc0 is current device
5162176 bytes read in 334 ms (14.7 MiB/s)
Kernel image @ 0x080000 [ 0x000000 - 0x4ec4c0 ]
## Flattened Device Tree blob at 1bfe9c00
   Booting using the fdt blob at 0x1bfe9c00
   reserving fdt memory region: addr=0 size=1000
   Using Device Tree in place at 1bfe9c00, end 1bff2f03

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.19.88 (oe-user@oe-host) (gcc version 8.3.0 (GCC)) #1 Mon Jun 29 16:24:38 UTC 2020
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[    0.000000] Memory policy: Data cache writeback
[    0.000000] cma: Reserved 8 MiB at 0x1b400000
[    0.000000] random: get_random_bytes called from start_kernel+0x94/0x498 with crng_init=0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 113680
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:20:AF:02 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p3 rootfstype=ext4 elevator=deadline fsck.mode=force fsck.repair=yes rootwait
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 434044K/458752K available (7206K kernel code, 661K rwdata, 2168K rodata, 464K init, 804K bss, 16516K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xdc800000 - 0xff800000   ( 560 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (7207 kB)
[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   ( 464 kB)
[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 662 kB)
[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 805 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 25872 entries in 76 pages
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000031] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000093] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000226] bcm2835: system timer (irq = 27)
[    0.000642] Console: colour dummy device 80x30
[    0.001272] console [tty1] enabled
[    0.001359] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[    0.060408] pid_max: default: 32768 minimum: 301
[    0.060983] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.061044] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.062483] CPU: Testing write buffer coherency: ok
[    0.063834] Setting up static identity map for 0x8200 - 0x8238
[    0.065268] devtmpfs: initialized
[    0.076256] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    0.076725] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.076804] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.078214] pinctrl core: initialized pinctrl subsystem
[    0.079827] NET: Registered protocol family 16
[    0.083299] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.090912] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.090984] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.091154] Serial: AMBA PL011 UART driver
[    0.094450] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[    0.138630] bcm2835-dma 20007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[    0.141340] SCSI subsystem initialized
[    0.141683] usbcore: registered new interface driver usbfs
[    0.141828] usbcore: registered new interface driver hub
[    0.142094] usbcore: registered new device driver usb
[    0.161001] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-09-24 17:37, variant start
[    0.171028] raspberrypi-firmware soc:firmware: Firmware hash is 6820edeee4ef3891b95fc01cf02a7abd7ca52f17
[    0.183934] clocksource: Switched to clocksource timer
[    0.294415] VFS: Disk quotas dquot_6.6.0
[    0.294601] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.294963] FS-Cache: Loaded
[    0.295335] CacheFiles: Loaded
[    0.314996] NET: Registered protocol family 2
[    0.316379] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[    0.316501] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.316609] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.316728] TCP: Hash tables configured (established 4096 bind 4096)
[    0.316927] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.316994] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.317457] NET: Registered protocol family 1
[    0.318593] RPC: Registered named UNIX socket transport module.
[    0.318656] RPC: Registered udp transport module.
[    0.318686] RPC: Registered tcp transport module.
[    0.318712] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.320941] hw perfevents: no irqs for PMU, sampling events not supported
[    0.321064] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
[    0.325490] Initialise system trusted keyrings
[    0.325949] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.341606] FS-Cache: Netfs 'nfs' registered for caching
[    0.343022] NFS: Registering the id_resolver key type
[    0.343146] Key type id_resolver registered
[    0.343180] Key type id_legacy registered
[    0.343232] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.355739] jitterentropy: Initialization failed with host not compliant with requirements: 2
[    0.356244] Key type asymmetric registered
[    0.356298] Asymmetric key parser 'x509' registered
[    0.356437] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.356959] io scheduler noop registered
[    0.357014] io scheduler deadline registered (default)
[    0.357667] io scheduler cfq registered
[    0.357718] io scheduler mq-deadline registered (default)
[    0.357752] io scheduler kyber registered
[    0.360596] bcm2708_fb soc:fb: FB found 1 display(s)
[    0.366960] Console: switching to colour frame buffer device 82x26
[    0.371369] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416
[    0.376560] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.380897] bcm2835-rng 20104000.rng: hwrng registered
[    0.383077] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    0.387538] vc-sm: Videocore shared memory driver
[    0.389990] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
[    0.413861] brd: module loaded
[    0.429224] loop: module loaded
[    0.431834] Loading iSCSI transport class v2.0-870.
[    0.434635] usbcore: registered new interface driver smsc95xx
[    0.436316] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.438364] dwc_otg 20980000.usb: base=(ptrval)
[    0.640445] Core Release: 2.80a
[    0.642100] Setting default values for core params
[    0.643717] Finished setting default values for core params
[    0.845840] Using Buffer DMA mode
[    0.847526] Periodic Transfer Interrupt Enhancement - disabled
[    0.849156] Multiprocessor Interrupt Enhancement - disabled
[    0.850762] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.852381] Dedicated Tx FIFOs mode
[    0.854874] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = db514000 dma = 0x5b514000 len=9024
[    0.858028] FIQ FSM acceleration enabled for :
[    0.858028] Non-periodic Split Transactions
[    0.858028] Periodic Split Transactions
[    0.858028] High-Speed Isochronous Endpoints
[    0.858028] Interrupt/Control Split Transaction hack enabled
[    0.865450] WARN::hcd_init_fiq:457: FIQ on core 0
[    0.866965] WARN::hcd_init_fiq:458: FIQ ASM at c05340d0 length 36
[    0.868432] WARN::hcd_init_fiq:497: MPHI regs_base at dc810000
[    0.869891] dwc_otg 20980000.usb: DWC OTG Controller
[    0.871375] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[    0.872910] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[    0.874502] Init: Port Power? op_state=1
[    0.875961] Init: Power Port (0)
[    0.877774] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.880660] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.882201] usb usb1: Product: DWC OTG Controller
[    0.883717] usb usb1: Manufacturer: Linux 4.19.88 dwc_otg_hcd
[    0.885324] usb usb1: SerialNumber: 20980000.usb
[    0.888051] hub 1-0:1.0: USB hub found
[    0.889684] hub 1-0:1.0: 1 port detected
[    0.892764] usbcore: registered new interface driver usb-storage
[    0.894928] mousedev: PS/2 mouse device common for all mice
[    0.896475] i2c /dev entries driver
[    0.899569] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    0.901645] bcm2835-cpufreq: min=700000 max=1000000
[    0.904097] sdhci: Secure Digital Host Controller Interface driver
[    0.905710] sdhci: Copyright(c) Pierre Ossman
[    0.907915] mmc-bcm2835 20300000.mmcnr: could not get clk, deferring probe
[    0.910328] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[    0.912281] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.914718] ledtrig-cpu: registered to indicate activity on CPUs
[    0.916551] hidraw: raw HID events driver (C) Jiri Kosina
[    0.918477] usbcore: registered new interface driver usbhid
[    0.920124] usbhid: USB HID core driver
[    0.922834] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[    0.926612] [vc_sm_connected_init]: start
[    0.936929] [vc_sm_connected_init]: end - returning 0
[    0.940448] Initializing XFRM netlink socket
[    0.942149] NET: Registered protocol family 17
[    0.943862] Key type dns_resolver registered
[    0.947435] registered taskstats version 1
[    0.949071] Loading compiled-in X.509 certificates
[    0.959854] uart-pl011 20201000.serial: cts_event_workaround enabled
[    0.961663] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[    2.173542] console [ttyAMA0] enabled
[    2.181746] mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    2.189556] mmc-bcm2835 20300000.mmcnr: DMA channel allocated
[    2.224518] random: fast init done
[    2.230842] sdhost: log_buf @ (ptrval) (5b513000)
[    2.272949] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.281816] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.288938] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.297736] of_cfs_init
[    2.301847] of_cfs_init: OK
[    2.327564] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.335010] Waiting for root device /dev/mmcblk0p3...
[    2.344528] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.413976] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.430501] mmc0: new high speed SDHC card at address aaaa
[    2.439923] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[    2.452536]  mmcblk0: p1 p2 p3 p4
[    2.485181] mmc1: new high speed SDIO card at address 0001
[    2.505465] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    2.516792] VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
[    2.536240] devtmpfs: mounted
[    2.546293] Freeing unused kernel memory: 464K
[    2.552370] This architecture does not have kernel memory protection.
[    2.560502] Run /sbin/init as init process
[    3.038946] NET: Registered protocol family 10
[    3.047306] Segment Routing with IPv6
[    3.089966] systemd[1]: systemd 241-214-gd1cc09a+ running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[    3.120864] systemd[1]: Detected architecture arm.
[    3.149605] systemd[1]: No hostname configured.
[    3.156182] systemd[1]: Set hostname to <localhost>.
[    3.175042] random: systemd: uninitialized urandom read (16 bytes read)
[    3.183674] systemd[1]: Initializing machine ID from random generator.
[    3.192526] systemd[1]: Installed transient /etc/machine-id file.
[    3.566945] uart-pl011 20201000.serial: no DMA platform data
[    4.127955] systemd[1]: /lib/systemd/system/chronyd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/chrony/chronyd.pid → /run/chrony/chronyd.pid; please update the unit file accordingly.
[    4.437821] random: systemd: uninitialized urandom read (16 bytes read)
[    4.448318] systemd[1]: Listening on Journal Socket.
[    4.459217] random: systemd: uninitialized urandom read (16 bytes read)
[    4.468045] systemd[1]: Reached target System Time Synchronized.
[    4.478884] random: systemd: uninitialized urandom read (16 bytes read)
[    4.488220] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   21.573628] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null)
[   21.965631] systemd-journald[80]: Received request to flush runtime journal from PID 1
[   31.328738] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[   31.366599] media: Linux media interface: v0.10
[   31.566334] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[   31.627530] videodev: Linux video capture interface: v2.00
[   31.654100] [vc_sm_connected_init]: start
[   31.724658] [vc_sm_connected_init]: installed successfully
[   31.953232] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   31.967580] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   32.173910] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[   32.240597] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[   32.589585] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[   32.628680] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   32.697081] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[   32.897232] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   32.926278] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[   33.031227] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[   33.066276] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   33.078946] cfg80211: failed to load regulatory.db
[   33.271534] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[   33.375691] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[   33.511146] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[   33.554823] usbcore: registered new interface driver brcmfmac
[   33.839848] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[   33.898261] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: May  2 2019 02:39:18 version 7.45.98.83 (r714225 CY) FWID 01-e539531f
[   35.608599] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   77.844046] random: crng init done
[   77.849430] random: 6 urandom warning(s) missed due to ratelimiting
Press Enter for maintenance
(or press Control-D to continue):