API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Mar 27th, 2017
121
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.01 KB | None | 0 0
raw download clone embed print report
  1. Server listening on: http://127.0.1.1:4444
  2. 6:01:10 PM - Requested: /xxx
  3. DEBUG is: 1
  4. vESPrino v1.16 build20170321
  5. IP address: 192.168.0.19
  6. Chip ID: 10473C
  7. Scanning SDA:SCA = 14:5
  8. I2C device found at address 0x69
  9. I2C device found at address 0xE9
  10. done
  11.  
  12. Using I2C Bus on SDA:SCA (14:5)
  13.  
  14. --- Setup PLUGINS ---
  15. WifiStuff
  16. WebSocketServer
  17. PowerManager
  18. Neopixel
  19. No Name
  20. DweetIO
  21. WebServer
  22. PowerManager
  23. GPIO
  24. Annemometer
  25. DestinationManager
  26. TimerManager
  27.  
  28. --- Setup SENSORS ---
  29. CM110x : 0
  30. SI7021 : 0
  31. TEST : 0
  32. BME280 : 0
  33. BMP085 : 0
  34. PM2005 : 0
  35. CDM7160 : 1
  36. Found: CDM7160
  37. DS18B20 : 0
  38. TGS8100 : 0
  39. LDR : 0
  40. TSL2561 : 0
  41. BH1750 : 0
  42. APDS9960 : 0
  43.  
  44. Found Sensors: CDM7160,
  45.  
  46.  
  47. --- Setup DESTINATIONS ---
  48. CustomHTTP
  49. SerialDump
  50. MQTT
  51. RFX10
  52. Blynk
  53. RGBLed
  54. Heap : 33176
  55. Device initialized.
  56. Scheduling command: @***@gpio_set D6 0***@gpio_set D6 F***
  57. Scheduling command: @***@gpio_set D1 0***@gpio_set D1 F***
  58. Scheduling command: @gpio_set D6 0
  59. Scheduling command: @gpio_set D6 F
  60. Scheduling command: @gpio_set
  61. Waiting for WiFi from: Log.IP address: 192.168.0
  62. 6:01:13 PM - Requested: /xxx
  63. D1 0
  64. Scheduling command: @gpio_set D1 F
  65. Check time from google
  66. Raw CO2: 604
  67. CDM7160 : 36ms
  68.  
  69. ---Sending data---
  70. CustomHTTPDest::process
  71. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=88&nvalue=9]
  72. Payload: [{
  73. "status" : "OK",
  74. "title" : "Update Device"
  75. }
  76. ]
  77. CLOSED
  78. Response Code: 200
  79. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=76&nvalue=604]
  80. Payload: [{
  81. "status" : "OK",
  82. "title" : "Update Device"
  83. }
  84. ]
  85. CLOSED
  86. Response Code: 200
  87. CustomHTTP : 750ms
  88. SerialDumpDest::process
  89. IP : 192.168.0.19
  90. CHIPID : 10473C
  91. RUNTIME : 9
  92. GMTTIME : 57660001
  93. RSSI : -58
  94. CO2 : 604
  95. CO2R : 604
  96. SerialDump : 154ms
  97. MQTTDest::process
  98. MQTT : 96ms
  99. RFDest::process
  100. RFX10 : 0ms
  101. Blynk : 0ms
  102. RGBLed : 0ms
  103. Heap : 32336
  104.  
  105. 6:01:47 PM - Requested: /xxx
  106. Raw CO2: 603
  107. CDM7160 : 37ms
  108.  
  109. ---Sending data---
  110. CustomHTTPDest::process
  111. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=88&nvalue=42]
  112. Payload: [{
  113. "status" : "OK",
  114. "title" : "Update Device"
  115. }
  116. ]
  117. CLOSED
  118. Response Code: 200
  119. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=76&nvalue=604]
  120. Payload: [{
  121. "status" : "OK",
  122. "title" : "Update Device"
  123. }
  124. ]
  125. CLOSED
  126. Response Code: 200
  127. CustomHTTP : 787ms
  128. SerialDumpDest::process
  129. IP : 192.168.0.19
  130. CHIPID : 10473C
  131. RUNTIME : 42
  132. GMTTIME : 57693496
  133. RSSI : -59
  134. CO2 : 604
  135. CO2R : 603
  136. SerialDump : 155ms
  137. MQTTDest::process
  138. MQTT : 97ms
  139. RFDest::process
  140. RFX10 : 0ms
  141. Blynk : 0ms
  142. RGBLed : 0ms
  143. Heap : 32152
  144.  
  145. 6:02:21 PM - Requested: /xxx
  146. Sensor busy
  147. Raw CO2: 603
  148. CDM7160 : 370ms
  149.  
  150. ---Sending data---
  151. CustomHTTPDest::process
  152. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=88&nvalue=76]
  153. Payload: [{
  154. "status" : "OK",
  155. "title" : "Update Device"
  156. }
  157. ]
  158. CLOSED
  159. Response Code: 200
  160. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=76&nvalue=604]
  161. Payload: [{
  162. "status" : "OK",
  163. "title" : "Update Device"
  164. }
  165. ]
  166. CLOSED
  167. Response Code: 200
  168. CustomHTTP : 777ms
  169. SerialDumpDest::process
  170. IP : 192.168.0.19
  171. CHIPID : 10473C
  172. RUNTIME : 76
  173. GMTTIME : 57727030
  174. RSSI : -59
  175. CO2 : 604
  176. CO2R : 603
  177. SerialDump : 155ms
  178. MQTTDest::process
  179. MQTT : 96ms
  180. RFDest::process
  181. RFX10 : 0ms
  182. Blynk : 0ms
  183. RGBLed : 0ms
  184. Heap : 31968
  185.  
  186. 6:02:55 PM - Requested: /xxx
  187. 3Sensor busy
  188. Raw CO2: 602
  189. CDM7160 : 405ms
  190.  
  191. ---Sending data---
  192. CustomHTTPDest::process
  193. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=88&nvalue=110]
  194. Payload: [{
  195. "status" : "OK",
  196. "title" : "Update Device"
  197. }
  198. ]
  199. CLOSED
  200. Response Code: 200
  201. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=76&nvalue=603]
  202. Payload: [{
  203. "status" : "OK",
  204. "title" : "Update Device"
  205. }
  206. ]
  207. CLOSED
  208. Response Code: 200
  209. CustomHTTP : 777ms
  210. SerialDumpDest::process
  211. IP : 192.168.0.19
  212. CHIPID : 10473C
  213. RUNTIME : 110
  214. GMTTIME : 57760889
  215. RSSI : -59
  216. CO2 : 603
  217. CO2R : 602
  218. SerialDump : 156ms
  219. MQTTDest::process
  220. MQTT : 98ms
  221. RFDest::process
  222. RFX10 : 0ms
  223. Blynk : 0ms
  224. RGBLed : 0ms
  225. Heap : 31784
  226.  
  227. 6:03:28 PM - Requested: /xxx
  228. Raw CO2: 602
  229. CDM7160 : 36ms
  230.  
  231. ---Sending data---
  232. CustomHTTPDest::process
  233. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=88&nvalue=144]
  234. Payload: [{
  235. "status" : "OK",
  236. "title" : "Update Device"
  237. }
  238. ]
  239. CLOSED
  240. Response Code: 200
  241. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=76&nvalue=603]
  242. Payload: [{
  243. "status" : "OK",
  244. "title" : "Update Device"
  245. }
  246. ]
  247. CLOSED
  248. Response Code: 200
  249. CustomHTTP : 763ms
  250. SerialDumpDest::process
  251. IP : 192.168.0.19
  252. CHIPID : 10473C
  253. RUNTIME : 144
  254. GMTTIME : 57794785
  255. RSSI : -59
  256. CO2 : 603
  257. CO2R : 602
  258. SerialDump : 156ms
  259. MQTTDest::process
  260. MQTT : 97ms
  261. RFDest::process
  262. RFX10 : 0ms
  263. Blynk : 0ms
  264. RGBLed : 0ms
  265. Heap : 32152
  266.  
  267. 6:04:02 PM - Requested: /xxx
  268. Raw CO2: 603
  269. CDM7160 : 37ms
  270.  
  271. ---Sending data---
  272. CustomHTTPDest::process
  273. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=88&nvalue=177]
  274. Payload: [{
  275. "status" : "OK",
  276. "title" : "Update Device"
  277. }
  278. ]
  279. CLOSED
  280. Response Code: 200
  281. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=76&nvalue=603]
  282. Payload: [{
  283. "status" : "OK",
  284. "title" : "Update Device"
  285. }
  286. ]
  287. CLOSED
  288. Response Code: 200
  289. CustomHTTP : 772ms
  290. SerialDumpDest::process
  291. IP : 192.168.0.19
  292. CHIPID : 10473C
  293. RUNTIME : 177
  294. GMTTIME : 57828297
  295. RSSI : -59
  296. CO2 : 603
  297. CO2R : 603
  298. SerialDump : 157ms
  299. MQTTDest::process
  300. MQTT : 96ms
  301. RFDest::process
  302. RFX10 : 0ms
  303. Blynk : 0ms
  304. RGBLed : 0ms
  305. Heap : 32152
  306.  
  307. 6:04:35 PM - Requested: /xxx
  308. Raw CO2: 605
  309. CDM7160 : 37ms
  310.  
  311. ---Sending data---
  312. CustomHTTPDest::process
  313. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=88&nvalue=211]
  314. Payload: [{
  315. "status" : "OK",
  316. "title" : "Update Device"
  317. }
  318. ]
  319. CLOSED
  320. Response Code: 200
  321. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=76&nvalue=603]
  322. Payload: [{
  323. "status" : "OK",
  324. "title" : "Update Device"
  325. }
  326. ]
  327. CLOSED
  328. Response Code: 200
  329. CustomHTTP : 753ms
  330. SerialDumpDest::process
  331. IP : 192.168.0.19
  332. CHIPID : 10473C
  333. RUNTIME : 211
  334. GMTTIME : 57861817
  335. RSSI : -59
  336. CO2 : 603
  337. CO2R : 605
  338. SerialDump : 157ms
  339. MQTTDest::process
  340. MQTT : 97ms
  341. RFDest::process
  342. RFX10 : 0ms
  343. Blynk : 0ms
  344. RGBLed : 0ms
  345. Heap : 32152
  346.  
  347. 6:05:09 PM - Requested: /xxx
  348. Raw CO2: 606
  349. CDM7160 : 36ms
  350.  
  351. ---Sending data---
  352. CustomHTTPDest::process
  353. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=88&nvalue=244]
  354. Payload: [{
  355. "status" : "OK",
  356. "title" : "Update Device"
  357. }
  358. ]
  359. CLOSED
  360. Response Code: 200
  361. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=76&nvalue=604]
  362. Payload: [{
  363. "status" : "OK",
  364. "title" : "Update Device"
  365. }
  366. ]
  367. CLOSED
  368. Response Code: 200
  369. CustomHTTP : 753ms
  370. SerialDumpDest::process
  371. IP : 192.168.0.19
  372. CHIPID : 10473C
  373. RUNTIME : 244
  374. GMTTIME : 57895320
  375. RSSI : -59
  376. CO2 : 604
  377. CO2R : 606
  378. SerialDump : 157ms
  379. MQTTDest::process
  380. MQTT : 96ms
  381. RFDest::process
  382. RFX10 : 0ms
  383. Blynk : 0ms
  384. RGBLed : 0ms
  385. Heap : 32152
  386.  
  387. 6:05:43 PM - Requested: /xxx
  388. Sensor busy
  389. Raw CO2: 609
  390. CDM7160 : 372ms
  391.  
  392. ---Sending data---
  393. CustomHTTPDest::process
  394. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=88&nvalue=278]
  395. Payload: [{
  396. "status" : "OK",
  397. "title" : "Update Device"
  398. }
  399. ]
  400. CLOSED
  401. Response Code: 200
  402. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=76&nvalue=605]
  403. Payload: [{
  404. "status" : "OK",
  405. "title" : "Update Device"
  406. }
  407. ]
  408. CLOSED
  409. Response Code: 200
  410. CustomHTTP : 753ms
  411. SerialDumpDest::process
  412. IP : 192.168.0.19
  413. CHIPID : 10473C
  414. RUNTIME : 278
  415. GMTTIME : 57928821
  416. RSSI : -59
  417. CO2 : 605
  418. CO2R : 609
  419. SerialDump : 156ms
  420. MQTTDest::process
  421. MQTT : 96ms
  422. RFDest::process
  423. RFX10 : 0ms
  424. Blynk : 0ms
  425. RGBLed : 0ms
  426. Heap : 32152
  427.  
  428. 6:06:02 PM - Requested: /xxx
  429. Switched to power-safe mode. Press key during start or restart device to exit.
  430. Completed in: 300810ms
  431. Going into power-safe mode for 30 seconds
  432.  
  433. 6:06:40 PM - Requested: /xxx
  434. Device will go to Deep Sleep mode, once data is sent. Press [Enter] to abort
  435. DEBUG is: 1
  436. vESPrino v1.16 build20170321
  437. IP address: 192.168.0.19
  438. Chip ID: 10473C
  439. Scanning SDA:SCA = 14:5
  440. I2C device found at address 0x69
  441. I2C device found at address 0xE9
  442. done
  443.  
  444. Using I2C Bus on SDA:SCA (14:5)
  445.  
  446. --- Setup PLUGINS ---
  447. WifiStuff
  448. WebSocketServer
  449. PowerManager
  450. Neopixel
  451. No Name
  452. DweetIO
  453. WebServer
  454. PowerManager
  455. GPIO
  456. Annemometer
  457. DestinationManager
  458. TimerManager
  459.  
  460. --- Setup SENSORS ---
  461. CM110x : 0
  462. SI7021 : 0
  463. TEST : 0
  464. BME280 : 0
  465. BMP085 : 0
  466. PM2005 : 0
  467. CDM7160 : 1
  468. Found: CDM7160
  469. DS18B20 : 0
  470. TGS8100 : 0
  471. LDR : 0
  472. TSL2561 : 0
  473. BH1750 : 0
  474. APDS9960 : 0
  475.  
  476. Found Sensors: CDM7160,
  477.  
  478.  
  479. --- Setup DESTINATIONS ---
  480. CustomHTTP
  481. SerialDump
  482. MQTT
  483. RFX10
  484. Blynk
  485. RGBLed
  486. Heap : 33176
  487. Device initialized.
  488. Scheduling command: @***@gpio_set D6 0***@gpio_set D6 F***
  489. Scheduling command: @***@gpio_set D1 0***@gpio_set D1 F***
  490. Scheduling command: @gpio
  491. Waiting for WiFi from: Log.IP address: 192.168.0
  492. 6:06:44 PM - Requested: /xxx
  493. _set D6 0
  494. Scheduling command: @gpio_set D6 F
  495. Scheduling command: @gpio_set D1 0
  496. Scheduling command: @gpio_set D1 F
  497. Raw CO2: 605
  498. CDM7160 : 37ms
  499.  
  500. ---Sending data---
  501. CustomHTTPDest::process
  502. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=88&nvalue=340]
  503. Payload: [{
  504. "status" : "OK",
  505. "title" : "Update Device"
  506. }
  507. ]
  508. CLOSED
  509. Response Code: 200
  510. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=76&nvalue=605]
  511. Payload: [{
  512. "status" : "OK",
  513. "title" : "Update Device"
  514. }
  515. ]
  516. CLOSED
  517. Response Code: 200
  518. CustomHTTP : 1074ms
  519. SerialDumpDest::process
  520. IP : 192.168.0.19
  521. CHIPID : 10473C
  522. RUNTIME : 340
  523. GMTTIME : 57990685
  524. RSSI : -58
  525. CO2 : 605
  526. CO2R : 605
  527. SerialDump : 158ms
  528. MQTTDest::process
  529. MQTT : 96ms
  530. RFDest::process
  531. RFX10 : 0ms
  532. Blynk : 0ms
  533. RGBLed : 0ms
  534. Heap : 32520
  535.  
  536. 6:06:44 PM - Requested: /xxx
  537. Completed in: 12935ms
  538. Going into power-safe mode for 30 seconds
  539.  
  540. 6:07:23 PM - Requested: /xxx
  541. Device will go to Deep Sleep mode, once data is sent. Press [Enter] to abort
  542. DEBUG is: 1
  543. vESPrino v1.16 build20170321
  544. IP address: 192.168.0.19
  545. Chip ID: 10473C
  546. Scanning SDA:SCA = 14:5
  547. I2C device found at address 0x69
  548. I2C device found at address 0xE9
  549. done
  550.  
  551. Using I2C Bus on SDA:SCA (14:5)
  552.  
  553. --- Setup PLUGINS ---
  554. WifiStuff
  555. WebSocketServer
  556. PowerManager
  557. Neopixel
  558. No Name
  559. DweetIO
  560. WebServer
  561. PowerManager
  562. GPIO
  563. Annemometer
  564. DestinationManager
  565. TimerManager
  566.  
  567. --- Setup SENSORS ---
  568. CM110x : 0
  569. SI7021 : 0
  570. TEST : 0
  571. BME280 : 0
  572. BMP085 : 0
  573. PM2005 : 0
  574. CDM7160 : 1
  575. Found: CDM7160
  576. DS18B20 : 0
  577. TGS8100 : 0
  578. LDR : 0
  579. TSL2561 : 0
  580. BH1750 : 0
  581. APDS9960 : 0
  582.  
  583. Found Sensors: CDM7160,
  584.  
  585.  
  586. --- Setup DESTINATIONS ---
  587. CustomHTTP
  588. SerialDump
  589. MQTT
  590. RFX10
  591. Blynk
  592. RGBLed
  593. Heap : 33176
  594. Device initialized.
  595. Scheduling command: @***@gpio_set D6 0***@gpio_set D6 F***
  596. Scheduling command: @***@gpio_set D1 0***@gpio_set D1 F***
  597. Scheduling command: @gpio
  598. Waiting for WiFi from: Log.IP address: 192.168.0
  599. 6:07:26 PM - Requested: /xxx
  600. _set D6 0
  601. Scheduling command: @gpio_set D6 F
  602. Scheduling command: @gpio_set D1 0
  603. Scheduling command: @gpio_set D1 F
  604. Raw CO2: 604
  605. CDM7160 : 37ms
  606.  
  607. ---Sending data---
  608. CustomHTTPDest::process
  609. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=88&nvalue=383]
  610. Payload: [{
  611. "status" : "OK",
  612. "title" : "Update Device"
  613. }
  614. ]
  615. CLOSED
  616. Response Code: 200
  617. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=76&nvalue=605]
  618. Payload: [{
  619. "status" : "OK",
  620. "title" : "Update Device"
  621. }
  622. ]
  623. CLOSED
  624. Response Code: 200
  625. CustomHTTP : 749ms
  626. SerialDumpDest::process
  627. IP : 192.168.0.19
  628. CHIPID : 10473C
  629. RUNTIME : 383
  630. GMTTIME : 58033842
  631. RSSI : -58
  632. CO2 : 605
  633. CO2R : 604
  634. SerialDump : 156ms
  635. MQTTDest::process
  636. MQTT : 95ms
  637. RFDest::process
  638. RFX10 : 1ms
  639. Blynk : 0ms
  640. RGBLed : 0ms
  641. Heap : 32520
  642.  
  643. 6:07:26 PM - Requested: /xxx
  644. Completed in: 12609ms
  645. Going into power-safe mode for 30 seconds
  646.  
  647. 6:08:05 PM - Requested: /xxx
  648. Device will go to Deep Sleep mode, once data is sent. Press [Enter] to abort
  649. DEBUG is: 1
  650. vESPrino v1.16 build20170321
  651. IP address: 192.168.0.19
  652. Chip ID: 10473C
  653. Scanning SDA:SCA = 14:5
  654. I2C device found at address 0x69
  655. I2C device found at address 0xE9
  656. done
  657.  
  658. Using I2C Bus on SDA:SCA (14:5)
  659.  
  660. --- Setup PLUGINS ---
  661. WifiStuff
  662. WebSocketServer
  663. PowerManager
  664. Neopixel
  665. No Name
  666. DweetIO
  667. WebServer
  668. PowerManager
  669. GPIO
  670. Annemometer
  671. DestinationManager
  672. TimerManager
  673.  
  674. --- Setup SENSORS ---
  675. CM110x : 0
  676. SI7021 : 0
  677. TEST : 0
  678. BME280 : 0
  679. BMP085 : 0
  680. PM2005 : 0
  681. CDM7160 : 1
  682. Found: CDM7160
  683. DS18B20 : 0
  684. TGS8100 : 0
  685. LDR : 0
  686. TSL2561 : 0
  687. BH1750 : 0
  688. APDS9960 : 0
  689.  
  690. Found Sensors: CDM7160,
  691.  
  692.  
  693. --- Setup DESTINATIONS ---
  694. CustomHTTP
  695. SerialDump
  696. MQTT
  697. RFX10
  698. Blynk
  699. RGBLed
  700. Heap : 33176
  701. Device initialized.
  702. Scheduling command: @***@gpio_set D6 0***@gpio_set D6 F***
  703. Scheduling command: @***@gpio_set D1 0***@gpio_set D1 F***
  704. Scheduling command: @gpio
  705. Waiting for WiFi from: Log.IP address: 192.168.0
  706. 6:08:09 PM - Requested: /xxx
  707. _set D6 0
  708. Scheduling command: @gpio_set D6 F
  709. Scheduling command: @gpio_set D1 0
  710. Scheduling command: @gpio_set D1 F
  711. Raw CO2: 605
  712. CDM7160 : 37ms
  713.  
  714. ---Sending data---
  715. CustomHTTPDest::process
  716. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=88&nvalue=426]
  717. Payload: [{
  718. "status" : "OK",
  719. "title" : "Update Device"
  720. }
  721. ]
  722. CLOSED
  723. Response Code: 200
  724. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=76&nvalue=606]
  725. Payload: [{
  726. "status" : "OK",
  727. "title" : "Update Device"
  728. }
  729. ]
  730. CLOSED
  731. Response Code: 200
  732. CustomHTTP : 764ms
  733. SerialDumpDest::process
  734. IP : 192.168.0.19
  735. CHIPID : 10473C
  736. RUNTIME : 426
  737. GMTTIME : 58077257
  738. RSSI : -60
  739. CO2 : 606
  740. CO2R : 605
  741. SerialDump : 156ms
  742. MQTTDest::process
  743. MQTT : 96ms
  744. RFDest::process
  745. RFX10 : 0ms
  746. Blynk : 0ms
  747. RGBLed : 0ms
  748. Heap : 32520
  749.  
  750. 6:08:09 PM - Requested: /xxx
  751. Completed in: 13187ms
  752. Going into power-safe mode for 30 seconds
  753.  
  754. 6:08:47 PM - Requested: /xxx
  755. Device will go to Deep Sleep mode, once data is sent. Press [Enter] to abort
  756. DEBUG is: 1
  757. vESPrino v1.16 build20170321
  758. IP address: 192.168.0.19
  759. Chip ID: 10473C
  760. Scanning SDA:SCA = 14:5
  761. I2C device found at address 0x69
  762. I2C device found at address 0xE9
  763. done
  764.  
  765. Using I2C Bus on SDA:SCA (14:5)
  766.  
  767. --- Setup PLUGINS ---
  768. WifiStuff
  769. WebSocketServer
  770. PowerManager
  771. Neopixel
  772. No Name
  773. DweetIO
  774. WebServer
  775. PowerManager
  776. GPIO
  777. Annemometer
  778. DestinationManager
  779. TimerManager
  780.  
  781. --- Setup SENSORS ---
  782. CM110x : 0
  783. SI7021 : 0
  784. TEST : 0
  785. BME280 : 0
  786. BMP085 : 0
  787. PM2005 : 0
  788. CDM7160 : 1
  789. Found: CDM7160
  790. DS18B20 : 0
  791. TGS8100 : 0
  792. LDR : 0
  793. TSL2561 : 0
  794. BH1750 : 0
  795. APDS9960 : 0
  796.  
  797. Found Sensors: CDM7160,
  798.  
  799.  
  800. --- Setup DESTINATIONS ---
  801. CustomHTTP
  802. SerialDump
  803. MQTT
  804. RFX10
  805. Blynk
  806. RGBLed
  807. Heap : 33176
  808. Device initialized.
  809. Scheduling command: @***@gpio_set D6 0***@gpio_set D6 F***
  810. Scheduling command: @***@gpio_set D1 0***@gpio_set D1 F***
  811. Scheduling command: @gpio
  812. Waiting for WiFi from: Log.IP address: 192.168.0
  813. 6:08:51 PM - Requested: /xxx
  814. _set D6 0
  815. Scheduling command: @gpio_set D6 F
  816. Scheduling command: @gpio_set D1 0
  817. Scheduling command: @gpio_set D1 F
  818. Raw CO2: 603
  819. CDM7160 : 37ms
  820.  
  821. ---Sending data---
  822. CustomHTTPDest::process
  823. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=88&nvalue=469]
  824. Payload: [{
  825. "status" : "OK",
  826. "title" : "Update Device"
  827. }
  828. ]
  829. CLOSED
  830. Response Code: 200
  831. Calling HTTP: [http://192.168.0.5:8080/json.htm?type=command&param=udevice&idx=76&nvalue=605]
  832. Payload: [{
  833. "status" : "OK",
  834. "title" : "Update Device"
  835. }
  836. ]
  837. CLOSED
  838. Response Code: 200
  839. CustomHTTP : 795ms
  840. SerialDumpDest::process
  841. IP : 192.168.0.19
  842. CHIPID : 10473C
  843. RUNTIME : 469
  844. GMTTIME : 58120110
  845. RSSI : -56
  846. CO2 : 605
  847. CO2R : 603
  848. SerialDump : 156ms
  849. MQTTDest::process
  850. MQTT : 96ms
  851. RFDest::process
  852. RFX10 : 0ms
  853. Blynk : 0ms
  854. RGBLed : 0ms
  855. Heap : 32520
  856.  
  857. 6:08:51 PM - Requested: /xxx
  858. Completed in: 12680ms
  859. Going into power-safe mode for 30 seconds
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!