API tools faq
paste
Guest User

Untitled

a guest
Feb 13th, 2025
66
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 48.15 KB | None | 0 0
raw download clone embed print report
  1. RingLogger.next
  2.  
  3. 14:16:06.738 [info] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
  4.  
  5. 14:16:06.738 [info] Linux version 6.6.64-v8-16k (buildroot@buildroot) (aarch64-nerves-linux-gnu-gcc (crosstool-NG UNKNOWN) 13.2.0, GNU ld (crosstool-NG UNKNOWN) 2.40) #1 SMP PREEMPT Mon Jan 20 14:16:05 UTC 2025
  6.  
  7. 14:16:06.738 [info] KASLR enabled
  8.  
  9. 14:16:06.738 [info] random: crng init done
  10.  
  11. 14:16:06.738 [info] Machine model: Raspberry Pi Compute Module 5 Rev 1.0
  12.  
  13. 14:16:06.738 [info] Reserved memory: created CMA memory pool at 0x0000000001000000, size 64 MiB
  14.  
  15. 14:16:06.738 [info] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  16.  
  17. 14:16:06.738 [info] OF: reserved mem: 0x0000000001000000..0x0000000004ffffff (65536 KiB) map reusable linux,cma
  18.  
  19. 14:16:06.738 [info] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
  20.  
  21. 14:16:06.738 [info] OF: reserved mem: 0x000000003fd16820..0x000000003fd168c0 (0 KiB) nomap non-reusable nvram@0
  22.  
  23. 14:16:06.738 [info] Zone ranges:
  24.  
  25. 14:16:06.738 [info] DMA [mem 0x0000000000000000-0x00000000ffffffff]
  26.  
  27. 14:16:06.738 [info] DMA32 empty
  28.  
  29. 14:16:06.738 [info] Normal empty
  30.  
  31. 14:16:06.738 [info] Movable zone start for each node
  32.  
  33. 14:16:06.738 [info] Early memory node ranges
  34.  
  35. 14:16:06.738 [info] node 0: [mem 0x0000000000000000-0x000000000007ffff]
  36.  
  37. 14:16:06.739 [info] node 0: [mem 0x0000000000080000-0x000000003f7fffff]
  38.  
  39. 14:16:06.739 [info] node 0: [mem 0x0000000040000000-0x00000000ffffffff]
  40.  
  41. 14:16:06.739 [info] Initmem setup node 0 [mem 0x0000000000000000-0x00000000ffffffff]
  42.  
  43. 14:16:06.739 [info] On node 0, zone DMA: 2048 pages in unavailable ranges
  44.  
  45. 14:16:06.739 [info] psci: probing for conduit method from DT.
  46.  
  47. 14:16:06.739 [info] psci: PSCIv1.1 detected in firmware.
  48.  
  49. 14:16:06.739 [info] psci: Using standard PSCI v0.2 function IDs
  50.  
  51. 14:16:06.739 [info] psci: MIGRATE_INFO_TYPE not supported.
  52.  
  53. 14:16:06.739 [info] psci: SMC Calling Convention v1.2
  54.  
  55. 14:16:06.739 [info] percpu: Embedded 17 pages/cpu s32680 r8192 d28760 u69632
  56.  
  57. 14:16:06.739 [debug] pcpu-alloc: s32680 r8192 d28760 u69632 alloc=17*4096
  58.  
  59. 14:16:06.739 [debug] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  60.  
  61. 14:16:06.739 [info] Detected PIPT I-cache on CPU0
  62.  
  63. 14:16:06.739 [info] CPU features: detected: Virtualization Host Extensions
  64.  
  65. 14:16:06.739 [info] CPU features: detected: Hardware dirty bit management
  66.  
  67. 14:16:06.739 [info] CPU features: detected: Spectre-v4
  68.  
  69. 14:16:06.739 [info] CPU features: detected: Spectre-BHB
  70.  
  71. 14:16:06.739 [info] CPU features: kernel page table isolation forced ON by KASLR
  72.  
  73. 14:16:06.739 [info] CPU features: detected: Kernel page table isolation (KPTI)
  74.  
  75. 14:16:06.739 [info] CPU features: detected: SSBS not fully self-synchronizing
  76.  
  77. 14:16:06.739 [info] alternatives: applying boot alternatives
  78.  
  79. 14:16:06.739 [info] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave smsc95xx.macaddr=2C:CF:67:C5:9B:74 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA10,115200 fbcon=scrollback:1024k root=/dev/mmcblk0p2 rootfstype=squashfs rootwait consoleblank=0 quiet
  80.  
  81. 14:16:06.739 [info] cgroup: Disabling memory control group subsystem
  82.  
  83. 14:16:06.739 [warn] Ignoring scrollback size option
  84.  
  85. 14:16:06.739 [info] Unknown kernel command line parameters "numa_policy=interleave", will be passed to user space.
  86.  
  87. 14:16:06.739 [info] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  88.  
  89. 14:16:06.739 [info] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  90.  
  91. 14:16:06.739 [info] Built 1 zonelists, mobility grouping on. Total pages: 1030144
  92.  
  93. 14:16:06.739 [info] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
  94.  
  95. 14:16:06.739 [info] Memory: 4025552K/4186112K available (8192K kernel code, 942K rwdata, 2060K rodata, 1664K init, 850K bss, 95024K reserved, 65536K cma-reserved)
  96.  
  97. 14:16:06.739 [info] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  98.  
  99. 14:16:06.739 [info] rcu: Preemptible hierarchical RCU implementation.
  100.  
  101. 14:16:06.739 [info] \x09Trampoline variant of Tasks RCU enabled.
  102.  
  103. 14:16:06.739 [info] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  104.  
  105. 14:16:06.739 [info] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  106.  
  107. 14:16:06.739 [info] Root IRQ handler: gic_handle_irq
  108.  
  109. 14:16:06.739 [info] GIC: Using split EOI/Deactivate mode
  110.  
  111. 14:16:06.739 [info] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  112.  
  113. 14:16:06.739 [info] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  114.  
  115. 14:16:06.739 [info] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  116.  
  117. 14:16:06.739 [info] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  118.  
  119. 14:16:06.739 [info] Console: colour dummy device 80x25
  120.  
  121. 14:16:06.739 [info] printk: console [tty1] enabled
  122.  
  123. 14:16:06.739 [info] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
  124.  
  125. 14:16:06.740 [info] pid_max: default: 32768 minimum: 301
  126.  
  127. 14:16:06.740 [info] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  128.  
  129. 14:16:06.740 [info] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  130.  
  131. 14:16:06.740 [info] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
  132.  
  133. 14:16:06.740 [info] rcu: Hierarchical SRCU implementation.
  134.  
  135. 14:16:06.740 [info] rcu: \x09Max phase no-delay instances is 1000.
  136.  
  137. 14:16:06.740 [info] smp: Bringing up secondary CPUs ...
  138.  
  139. 14:16:06.740 [info] Detected PIPT I-cache on CPU1
  140.  
  141. 14:16:06.740 [info] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
  142.  
  143. 14:16:06.740 [info] Detected PIPT I-cache on CPU2
  144.  
  145. 14:16:06.740 [info] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
  146.  
  147. 14:16:06.740 [info] Detected PIPT I-cache on CPU3
  148.  
  149. 14:16:06.740 [info] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
  150.  
  151. 14:16:06.740 [info] smp: Brought up 1 node, 4 CPUs
  152.  
  153. 14:16:06.740 [info] SMP: Total of 4 processors activated.
  154.  
  155. 14:16:06.740 [info] CPU features: detected: 32-bit EL0 Support
  156.  
  157. 14:16:06.740 [info] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  158.  
  159. 14:16:06.740 [info] CPU features: detected: Common not Private translations
  160.  
  161. 14:16:06.740 [info] CPU features: detected: CRC32 instructions
  162.  
  163. 14:16:06.740 [info] CPU features: detected: RCpc load-acquire (LDAPR)
  164.  
  165. 14:16:06.740 [info] CPU features: detected: LSE atomic instructions
  166.  
  167. 14:16:06.740 [info] CPU features: detected: Privileged Access Never
  168.  
  169. 14:16:06.740 [info] CPU features: detected: RAS Extension Support
  170.  
  171. 14:16:06.740 [info] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  172.  
  173. 14:16:06.740 [info] CPU: All CPU(s) started at EL2
  174.  
  175. 14:16:06.740 [info] alternatives: applying system-wide alternatives
  176.  
  177. 14:16:06.740 [info] devtmpfs: initialized
  178.  
  179. 14:16:06.740 [info] Enabled cp15_barrier support
  180.  
  181. 14:16:06.740 [info] Enabled setend support
  182.  
  183. 14:16:06.740 [info] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  184.  
  185. 14:16:06.740 [info] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  186.  
  187. 14:16:06.740 [info] pinctrl core: initialized pinctrl subsystem
  188.  
  189. 14:16:06.740 [info] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  190.  
  191. 14:16:06.740 [info] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  192.  
  193. 14:16:06.740 [info] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  194.  
  195. 14:16:06.740 [info] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  196.  
  197. 14:16:06.740 [info] thermal_sys: Registered thermal governor 'step_wise'
  198.  
  199. 14:16:06.740 [info] cpuidle: using governor menu
  200.  
  201. 14:16:06.740 [info] ASID allocator initialised with 32768 entries
  202.  
  203. 14:16:06.740 [info] Serial: AMBA PL011 UART driver
  204.  
  205. 14:16:06.740 [info] bcm2835-mbox 107c013880.mailbox: mailbox enabled
  206.  
  207. 14:16:06.740 [info] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2
  208.  
  209. 14:16:06.740 [info] printk: console [ttyAMA10] enabled
  210.  
  211. 14:16:06.740 [info] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-09-23T13:02:56, variant start_cd
  212.  
  213. 14:16:06.740 [info] raspberrypi-firmware soc:firmware: Firmware hash is 2682625900000000000000000000000000000000
  214.  
  215. 14:16:06.740 [info] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
  216.  
  217. 14:16:06.740 [info] Modules: 0 pages in range for non-PLT usage
  218.  
  219. 14:16:06.740 [info] Modules: 520816 pages in range for PLT usage
  220.  
  221. 14:16:06.740 [info] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
  222.  
  223. 14:16:06.740 [info] iommu: Default domain type: Translated
  224.  
  225. 14:16:06.740 [info] iommu: DMA domain TLB invalidation policy: strict mode
  226.  
  227. 14:16:06.740 [info] SCSI subsystem initialized
  228.  
  229. 14:16:06.740 [info] usbcore: registered new interface driver usbfs
  230.  
  231. 14:16:06.740 [info] usbcore: registered new interface driver hub
  232.  
  233. 14:16:06.740 [info] usbcore: registered new device driver usb
  234.  
  235. 14:16:06.740 [info] pps_core: LinuxPPS API ver. 1 registered
  236.  
  237. 14:16:06.740 [info] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  238.  
  239. 14:16:06.740 [info] PTP clock support registered
  240.  
  241. 14:16:06.740 [info] vgaarb: loaded
  242.  
  243. 14:16:06.740 [info] clocksource: Switched to clocksource arch_sys_counter
  244.  
  245. 14:16:06.740 [info] FS-Cache: Loaded
  246.  
  247. 14:16:06.740 [info] CacheFiles: Loaded
  248.  
  249. 14:16:06.740 [info] NET: Registered PF_INET protocol family
  250.  
  251. 14:16:06.740 [info] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  252.  
  253. 14:16:06.740 [info] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  254.  
  255. 14:16:06.740 [info] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  256.  
  257. 14:16:06.741 [info] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  258.  
  259. 14:16:06.741 [info] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
  260.  
  261. 14:16:06.741 [info] TCP: Hash tables configured (established 32768 bind 32768)
  262.  
  263. 14:16:06.741 [info] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  264.  
  265. 14:16:06.741 [info] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  266.  
  267. 14:16:06.741 [info] NET: Registered PF_UNIX/PF_LOCAL protocol family
  268.  
  269. 14:16:06.741 [info] PCI: CLS 0 bytes, default 64
  270.  
  271. 14:16:06.741 [info] Initialise system trusted keyrings
  272.  
  273. 14:16:06.741 [info] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  274.  
  275. 14:16:06.741 [info] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  276.  
  277. 14:16:06.741 [info] Key type asymmetric registered
  278.  
  279. 14:16:06.741 [info] Asymmetric key parser 'x509' registered
  280.  
  281. 14:16:06.741 [info] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  282.  
  283. 14:16:06.741 [info] io scheduler mq-deadline registered
  284.  
  285. 14:16:06.741 [info] io scheduler kyber registered
  286.  
  287. 14:16:06.741 [info] io scheduler bfq registered
  288.  
  289. 14:16:06.741 [info] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 26)
  290.  
  291. 14:16:06.741 [info] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 27)
  292.  
  293. 14:16:06.741 [info] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 28)
  294.  
  295. 14:16:06.741 [info] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 29)
  296.  
  297. 14:16:06.741 [info] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 30)
  298.  
  299. 14:16:06.741 [info] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 31)
  300.  
  301. 14:16:06.741 [info] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  302.  
  303. 14:16:06.741 [info] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART
  304.  
  305. 14:16:06.741 [info] serial serial0: tty port ttyS0 registered
  306.  
  307. 14:16:06.741 [info] iproc-rng200 107d208000.rng: hwrng registered
  308.  
  309. 14:16:06.741 [info] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
  310.  
  311. 14:16:06.741 [info] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
  312.  
  313. 14:16:06.741 [info] brd: module loaded
  314.  
  315. 14:16:06.741 [info] loop: module loaded
  316.  
  317. 14:16:06.741 [info] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  318.  
  319. 14:16:06.741 [info] Loading iSCSI transport class v2.0-870.
  320.  
  321. 14:16:06.741 [info] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  322.  
  323. 14:16:06.741 [debug] dwc_otg: FIQ enabled
  324.  
  325. 14:16:06.741 [debug] dwc_otg: NAK holdoff enabled
  326.  
  327. 14:16:06.741 [debug] dwc_otg: FIQ split-transaction FSM enabled
  328.  
  329. 14:16:06.741 [debug] Module dwc_common_port init
  330.  
  331. 14:16:06.741 [info] usbcore: registered new interface driver usb-storage
  332.  
  333. 14:16:06.741 [info] rpi-rtc soc:rpi_rtc: registered as rtc0
  334.  
  335. 14:16:06.741 [info] rpi-rtc soc:rpi_rtc: setting system clock to 1970-01-01T00:00:07 UTC (7)
  336.  
  337. 14:16:06.741 [info] i2c_dev: i2c /dev entries driver
  338.  
  339. 14:16:06.741 [info] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
  340.  
  341. 14:16:06.741 [info] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  342.  
  343. 14:16:06.741 [info] sdhci: Secure Digital Host Controller Interface driver
  344.  
  345. 14:16:06.741 [info] sdhci: Copyright(c) Pierre Ossman
  346.  
  347. 14:16:06.741 [info] sdhci-pltfm: SDHCI platform and OF driver helper
  348.  
  349. 14:16:06.741 [info] ledtrig-cpu: registered to indicate activity on CPUs
  350.  
  351. 14:16:06.741 [info] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  352.  
  353. 14:16:06.741 [info] hid: raw HID events driver (C) Jiri Kosina
  354.  
  355. 14:16:06.741 [info] usbcore: registered new interface driver usbhid
  356.  
  357. 14:16:06.741 [info] usbhid: USB HID core driver
  358.  
  359. 14:16:06.741 [info] NET: Registered PF_INET6 protocol family
  360.  
  361. 14:16:06.741 [info] Segment Routing with IPv6
  362.  
  363. 14:16:06.741 [info] In-situ OAM (IOAM) with IPv6
  364.  
  365. 14:16:06.741 [info] NET: Registered PF_PACKET protocol family
  366.  
  367. 14:16:06.741 [info] Loading compiled-in X.509 certificates
  368.  
  369. 14:16:06.741 [info] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@110000 ranges:
  370.  
  371. 14:16:06.741 [info] brcm-pcie 1000110000.pcie: No bus range found for /axi/pcie@110000, using [bus 00-ff]
  372.  
  373. 14:16:06.741 [info] brcm-pcie 1000110000.pcie: MEM 0x1b80000000..0x1bffffffff -> 0x0080000000
  374.  
  375. 14:16:06.741 [info] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1b7fffffff -> 0x0400000000
  376.  
  377. 14:16:06.741 [info] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
  378.  
  379. 14:16:06.741 [info] brcm-pcie 1000110000.pcie: Forcing gen 2
  380.  
  381. 14:16:06.741 [info] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0000:00
  382.  
  383. 14:16:06.741 [info] pci_bus 0000:00: root bus resource [bus 00-ff]
  384.  
  385. 14:16:06.742 [info] pci_bus 0000:00: root bus resource [mem 0x1b80000000-0x1bffffffff] (bus address [0x80000000-0xffffffff])
  386.  
  387. 14:16:06.742 [info] pci_bus 0000:00: root bus resource [mem 0x1800000000-0x1b7fffffff pref] (bus address [0x400000000-0x77fffffff])
  388.  
  389. 14:16:06.742 [info] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
  390.  
  391. 14:16:06.742 [info] pci 0000:00:00.0: PME# supported from D0 D3hot
  392.  
  393. 14:16:06.742 [info] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  394.  
  395. 14:16:06.742 [error] brcm-pcie 1000110000.pcie: link down
  396.  
  397. 14:16:06.742 [info] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  398.  
  399. 14:16:06.742 [info] pci 0000:00:00.0: PCI bridge to [bus 01]
  400.  
  401. 14:16:06.742 [info] pci 0000:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
  402.  
  403. 14:16:06.742 [info] pcieport 0000:00:00.0: PME: Signaling with IRQ 34
  404.  
  405. 14:16:06.742 [info] pcieport 0000:00:00.0: AER: enabled with IRQ 34
  406.  
  407. 14:16:06.742 [info] pci_bus 0000:01: busn_res: [bus 01] is released
  408.  
  409. 14:16:06.742 [info] pci_bus 0000:00: busn_res: [bus 00-ff] is released
  410.  
  411. 14:16:06.742 [info] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
  412.  
  413. 14:16:06.742 [info] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@120000, using [bus 00-ff]
  414.  
  415. 14:16:06.742 [info] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
  416.  
  417. 14:16:06.742 [info] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
  418.  
  419. 14:16:06.742 [info] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
  420.  
  421. 14:16:06.742 [info] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
  422.  
  423. 14:16:06.742 [info] brcm-pcie 1000120000.pcie: Forcing gen 2
  424.  
  425. 14:16:06.742 [info] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00
  426.  
  427. 14:16:06.742 [info] pci_bus 0000:00: root bus resource [bus 00-ff]
  428.  
  429. 14:16:06.742 [info] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
  430.  
  431. 14:16:06.742 [info] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
  432.  
  433. 14:16:06.742 [info] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
  434.  
  435. 14:16:06.742 [info] pci 0000:00:00.0: PME# supported from D0 D3hot
  436.  
  437. 14:16:06.742 [info] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  438.  
  439. 14:16:06.742 [info] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
  440.  
  441. 14:16:06.742 [info] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000
  442.  
  443. 14:16:06.742 [info] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]
  444.  
  445. 14:16:06.742 [info] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]
  446.  
  447. 14:16:06.742 [info] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]
  448.  
  449. 14:16:06.742 [info] pci 0000:01:00.0: supports D1
  450.  
  451. 14:16:06.742 [info] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
  452.  
  453. 14:16:06.742 [info] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  454.  
  455. 14:16:06.742 [info] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff]
  456.  
  457. 14:16:06.742 [info] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]
  458.  
  459. 14:16:06.742 [info] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]
  460.  
  461. 14:16:06.742 [info] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]
  462.  
  463. 14:16:06.742 [info] pci 0000:00:00.0: PCI bridge to [bus 01]
  464.  
  465. 14:16:06.742 [info] pci 0000:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]
  466.  
  467. 14:16:06.742 [info] pci 0000:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
  468.  
  469. 14:16:06.742 [info] pci 0000:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
  470.  
  471. 14:16:06.742 [info] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  472.  
  473. 14:16:06.742 [info] pcieport 0000:00:00.0: PME: Signaling with IRQ 35
  474.  
  475. 14:16:06.742 [info] pcieport 0000:00:00.0: AER: enabled with IRQ 35
  476.  
  477. 14:16:06.742 [info] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
  478.  
  479. 14:16:06.742 [info] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
  480.  
  481. 14:16:06.742 [info] rp1 0000:01:00.0: enabling device (0000 -> 0002)
  482.  
  483. 14:16:06.742 [info] rp1 0000:01:00.0: chip_id 0x20001927
  484.  
  485. 14:16:06.742 [warn] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 155
  486.  
  487. 14:16:06.742 [info] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 103 (2c:cf:67:c5:9b:74)
  488.  
  489. 14:16:06.742 [info] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
  490.  
  491. 14:16:06.742 [info] xhci-hcd xhci-hcd.0: xHCI Host Controller
  492.  
  493. 14:16:06.742 [info] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
  494.  
  495. 14:16:06.742 [info] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
  496.  
  497. 14:16:06.742 [info] xhci-hcd xhci-hcd.0: irq 128, io mem 0x1f00200000
  498.  
  499. 14:16:06.742 [info] xhci-hcd xhci-hcd.0: xHCI Host Controller
  500.  
  501. 14:16:06.742 [info] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
  502.  
  503. 14:16:06.742 [info] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
  504.  
  505. 14:16:06.742 [info] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
  506.  
  507. 14:16:06.742 [info] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  508.  
  509. 14:16:06.743 [info] usb usb1: Product: xHCI Host Controller
  510.  
  511. 14:16:06.743 [info] usb usb1: Manufacturer: Linux 6.6.64-v8-16k xhci-hcd
  512.  
  513. 14:16:06.743 [info] usb usb1: SerialNumber: xhci-hcd.0
  514.  
  515. 14:16:06.743 [info] hub 1-0:1.0: USB hub found
  516.  
  517. 14:16:06.743 [info] hub 1-0:1.0: 2 ports detected
  518.  
  519. 14:16:06.743 [info] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
  520.  
  521. 14:16:06.743 [info] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  522.  
  523. 14:16:06.743 [info] usb usb2: Product: xHCI Host Controller
  524.  
  525. 14:16:06.743 [info] usb usb2: Manufacturer: Linux 6.6.64-v8-16k xhci-hcd
  526.  
  527. 14:16:06.743 [info] usb usb2: SerialNumber: xhci-hcd.0
  528.  
  529. 14:16:06.743 [info] hub 2-0:1.0: USB hub found
  530.  
  531. 14:16:06.743 [info] hub 2-0:1.0: 1 port detected
  532.  
  533. 14:16:06.743 [info] xhci-hcd xhci-hcd.1: xHCI Host Controller
  534.  
  535. 14:16:06.743 [info] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
  536.  
  537. 14:16:06.743 [info] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
  538.  
  539. 14:16:06.743 [info] xhci-hcd xhci-hcd.1: irq 133, io mem 0x1f00300000
  540.  
  541. 14:16:06.743 [info] xhci-hcd xhci-hcd.1: xHCI Host Controller
  542.  
  543. 14:16:06.743 [info] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
  544.  
  545. 14:16:06.743 [info] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
  546.  
  547. 14:16:06.743 [info] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
  548.  
  549. 14:16:06.743 [info] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  550.  
  551. 14:16:06.743 [info] usb usb3: Product: xHCI Host Controller
  552.  
  553. 14:16:06.743 [info] usb usb3: Manufacturer: Linux 6.6.64-v8-16k xhci-hcd
  554.  
  555. 14:16:06.743 [info] usb usb3: SerialNumber: xhci-hcd.1
  556.  
  557. 14:16:06.743 [info] hub 3-0:1.0: USB hub found
  558.  
  559. 14:16:06.743 [info] hub 3-0:1.0: 2 ports detected
  560.  
  561. 14:16:06.743 [info] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
  562.  
  563. 14:16:06.743 [info] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  564.  
  565. 14:16:06.743 [info] usb usb4: Product: xHCI Host Controller
  566.  
  567. 14:16:06.743 [info] usb usb4: Manufacturer: Linux 6.6.64-v8-16k xhci-hcd
  568.  
  569. 14:16:06.743 [info] usb usb4: SerialNumber: xhci-hcd.1
  570.  
  571. 14:16:06.743 [info] hub 4-0:1.0: USB hub found
  572.  
  573. 14:16:06.743 [info] hub 4-0:1.0: 1 port detected
  574.  
  575. 14:16:06.743 [info] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
  576.  
  577. 14:16:06.743 [info] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
  578.  
  579. 14:16:06.743 [info] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
  580.  
  581. 14:16:06.743 [info] platform 1000800000.codec: Adding to iommu group 0
  582.  
  583. 14:16:06.743 [info] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
  584.  
  585. 14:16:06.743 [info] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
  586.  
  587. 14:16:06.743 [info] platform 1000880000.pisp_be: Adding to iommu group 0
  588.  
  589. 14:16:06.743 [info] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
  590.  
  591. 14:16:06.743 [info] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
  592.  
  593. 14:16:06.743 [info] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
  594.  
  595. 14:16:06.743 [info] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
  596.  
  597. 14:16:06.743 [info] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
  598.  
  599. 14:16:06.743 [info] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
  600.  
  601. 14:16:06.743 [info] platform axi:gpu: Adding to iommu group 1
  602.  
  603. 14:16:06.743 [info] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
  604.  
  605. 14:16:06.743 [info] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
  606.  
  607. 14:16:06.743 [info] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
  608.  
  609. 14:16:06.743 [info] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
  610.  
  611. 14:16:06.744 [info] mmc0: CQHCI version 5.10
  612.  
  613. 14:16:06.744 [info] mmc1: CQHCI version 5.10
  614.  
  615. 14:16:06.744 [info] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
  616.  
  617. 14:16:06.744 [info] mmc0: Command Queue Engine enabled, 16 tags
  618.  
  619. 14:16:06.744 [info] mmc0: new HS400 Enhanced strobe MMC card at address 0001
  620.  
  621. 14:16:06.744 [info] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
  622.  
  623. 14:16:06.744 [info] mmcblk0: p1 p2 p3
  624.  
  625. 14:16:06.744 [info] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
  626.  
  627. 14:16:06.744 [info] mmcblk0boot0: mmc0:0001 AJTD4R 4.00 MiB
  628.  
  629. 14:16:06.744 [info] mmcblk0boot1: mmc0:0001 AJTD4R 4.00 MiB
  630.  
  631. 14:16:06.744 [info] mmcblk0rpmb: mmc0:0001 AJTD4R 4.00 MiB, chardev (244:0)
  632.  
  633. 14:16:06.744 [info] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
  634.  
  635. 14:16:06.744 [info] mmc1: new ultra high speed DDR50 SDIO card at address 0001
  636.  
  637. 14:16:06.744 [info] usb 3-1: new high-speed USB device number 2 using xhci-hcd
  638.  
  639. 14:16:06.744 [info] usb 3-1: New USB device found, idVendor=1a86, idProduct=8091, bcdDevice=12.20
  640.  
  641. 14:16:06.744 [info] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  642.  
  643. 14:16:06.744 [info] usb 3-1: Product: USB HUB
  644.  
  645. 14:16:06.744 [info] hub 3-1:1.0: USB hub found
  646.  
  647. 14:16:06.744 [info] hub 3-1:1.0: 4 ports detected
  648.  
  649. 14:16:06.744 [warn] rp1-firmware: probe of rp1_firmware failed with error -110
  650.  
  651. 14:16:06.744 [info] of_cfs_init
  652.  
  653. 14:16:06.744 [info] of_cfs_init: OK
  654.  
  655. 14:16:06.744 [info] clk: Disabling unused clocks
  656.  
  657. 14:16:06.744 [info] uart-pl011 107d001000.serial: no DMA platform data
  658.  
  659. 14:16:06.744 [info] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
  660.  
  661. 14:16:06.744 [info] devtmpfs: mounted
  662.  
  663. 14:16:06.744 [info] Freeing unused kernel memory: 1664K
  664.  
  665. 14:16:06.744 [info] Run /sbin/init as init process
  666.  
  667. 14:16:06.744 [debug] with arguments:
  668.  
  669. 14:16:06.744 [debug] /sbin/init
  670.  
  671. 14:16:06.744 [debug] with environment:
  672.  
  673. 14:16:06.744 [debug] HOME=/
  674.  
  675. 14:16:06.744 [debug] TERM=linux
  676.  
  677. 14:16:06.744 [debug] numa_policy=interleave
  678.  
  679. 14:16:06.744 [info] F2FS-fs (mmcblk0p3): Mounted with checkpoint version = 2dc153e8
  680.  
  681. 14:16:06.746 [info] [NervesTime] NervesTime.FileTime reports that the time is ~N[2025-02-13 11:59:10]
  682.  
  683. 11:59:10.000 [info] [NervesTime] nerves_time set system clock to 2025-02-13 11:59:10 UTC
  684.  
  685. 11:59:10.013 [info] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
  686.  
  687. 11:59:10.017 [info] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
  688.  
  689. 11:59:10.017 [info] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
  690.  
  691. 11:59:10.017 [info] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
  692.  
  693. 11:59:10.017 [info] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
  694.  
  695. 11:59:10.017 [info] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
  696.  
  697. 11:59:10.017 [info] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
  698.  
  699. 11:59:10.017 [info] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
  700.  
  701. 11:59:10.017 [info] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
  702.  
  703. 11:59:10.017 [info] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
  704.  
  705. 11:59:10.019 [info] :alarm_handler: {:set, {{:disk_almost_full, ~c"/"}, []}}
  706.  
  707. 11:59:10.025 [warn] dwc2 1000480000.usb: supply vusb_d not found, using dummy regulator
  708.  
  709. 11:59:10.025 [warn] dwc2 1000480000.usb: supply vusb_a not found, using dummy regulator
  710.  
  711. 11:59:10.092 [debug] [NervesTime] starting /usr/sbin/ntpd with: ["-n", "-S", "/srv/erlang/lib/nerves_time-0.4.8/priv/ntpd_script", "-p", "0.pool.ntp.org", "-p", "1.pool.ntp.org", "-p", "2.pool.ntp.org", "-p", "3.pool.ntp.org"]
  712.  
  713. 11:59:10.092 [debug] VintageNet(eth0): :configured -> internal configure (VintageNetEthernet)
  714.  
  715. 11:59:10.092 [debug] VintageNet(wlan0): :configured -> internal configure (VintageNetWiFi)
  716.  
  717. 11:59:10.092 [debug] VintageNet(usb0): :configured -> internal configure (VintageNetDirect)
  718.  
  719. 11:59:10.092 [warn] RouteManager: new set_connection_status eth0 -> :disconnected (Elixir.VintageNet.Interface.handle_event/4([file: ~c"lib/vintage_net/interface.ex", line: 343]))
  720.  
  721. 11:59:10.092 [warn] RouteManager: new set_connection_status wlan0 -> :disconnected (Elixir.VintageNet.Interface.handle_event/4([file: ~c"lib/vintage_net/interface.ex", line: 343]))
  722.  
  723. 11:59:10.093 [warn] RouteManager: new set_connection_status usb0 -> :disconnected (Elixir.VintageNet.Interface.handle_event/4([file: ~c"lib/vintage_net/interface.ex", line: 343]))
  724.  
  725. 11:59:10.093 [info] RouteManager: clear_route eth0
  726.  
  727. 11:59:10.093 [warn] RouteManager: new set_connection_status eth0 -> :disconnected (Elixir.VintageNet.Interface.start_configuring/3([file: ~c"lib/vintage_net/interface.ex", line: 669]))
  728.  
  729. 11:59:10.100 [error] `inotify-tools` is needed to run `file_system` for your system, check https://github.com/rvoicilas/inotify-tools/wiki for more information about how to install it. If it's already installed but not be found, appoint executable file with `config.exs` or `FILESYSTEM_FSINOTIFY_EXECUTABLE_FILE` env.
  730.  
  731. 11:59:10.100 [warn] Not able to start file_system worker, reason: {:error, :fs_inotify_bootstrap_error}
  732.  
  733. 11:59:10.100 [warn] Could not start Phoenix live-reload because we cannot listen to the file system.
  734. You don't need to worry! This is an optional feature used during development to
  735. refresh your browser when you save files and it does not affect production.
  736.  
  737.  
  738. 11:59:10.105 [info] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:00] driver [Broadcom BCM54213PE] (irq=POLL)
  739.  
  740. 11:59:10.106 [info] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode
  741.  
  742. 11:59:10.109 [info] pps pps0: new PPS source ptp0
  743.  
  744. 11:59:10.109 [info] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
  745.  
  746. 11:59:10.113 [info] Running KioskExampleWeb.Endpoint with Bandit 1.5.5 at 127.0.0.1:4000 (http)
  747.  
  748. 11:59:10.113 [info] Access KioskExampleWeb.Endpoint at http://localhost:4000
  749.  
  750. 11:59:10.129 [info] udevd[161]: starting version 3.2.14
  751.  
  752. 11:59:10.141 [info] udevd[161]: starting eudev-3.2.14
  753.  
  754. 11:59:10.189 [info] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  755.  
  756. 11:59:10.189 [info] brcmstb-i2c 107d508200.i2c: @97500hz registered in interrupt mode
  757.  
  758. 11:59:10.193 [info] brcmstb-i2c 107d508280.i2c: @97500hz registered in interrupt mode
  759.  
  760. 11:59:10.193 [info] Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
  761.  
  762. 11:59:10.194 [info] Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
  763.  
  764. 11:59:10.194 [info] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  765.  
  766. 11:59:10.197 [info] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
  767.  
  768. 11:59:10.197 [info] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0
  769.  
  770. 11:59:10.210 [info] Bluetooth: Core ver 2.22
  771.  
  772. 11:59:10.210 [info] NET: Registered PF_BLUETOOTH protocol family
  773.  
  774. 11:59:10.210 [info] Bluetooth: HCI device and connection manager initialized
  775.  
  776. 11:59:10.210 [info] Bluetooth: HCI socket layer initialized
  777.  
  778. 11:59:10.210 [info] Bluetooth: L2CAP socket layer initialized
  779.  
  780. 11:59:10.210 [info] Bluetooth: SCO socket layer initialized
  781.  
  782. 11:59:10.210 [info] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  783.  
  784. 11:59:10.210 [warn] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,5-compute-module.bin failed with error -2
  785.  
  786. 11:59:10.210 [info] Bluetooth: HCI UART driver ver 2.3
  787.  
  788. 11:59:10.210 [info] Bluetooth: HCI UART protocol H4 registered
  789.  
  790. 11:59:10.210 [info] Bluetooth: HCI UART protocol Three-wire (H5) registered
  791.  
  792. 11:59:10.210 [info] Bluetooth: HCI UART protocol Broadcom registered
  793.  
  794. 11:59:10.210 [warn] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
  795.  
  796. 11:59:10.210 [warn] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
  797.  
  798. 11:59:10.233 [info] dwc2 1000480000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
  799.  
  800. 11:59:10.233 [info] dwc2 1000480000.usb: DWC OTG Controller
  801.  
  802. 11:59:10.233 [info] dwc2 1000480000.usb: new USB bus registered, assigned bus number 5
  803.  
  804. 11:59:10.233 [info] dwc2 1000480000.usb: irq 161, io mem 0x1000480000
  805.  
  806. 11:59:10.233 [info] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
  807.  
  808. 11:59:10.233 [info] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  809.  
  810. 11:59:10.233 [info] usb usb5: Product: DWC OTG Controller
  811.  
  812. 11:59:10.233 [info] usb usb5: Manufacturer: Linux 6.6.64-v8-16k dwc2_hsotg
  813.  
  814. 11:59:10.233 [info] usb usb5: SerialNumber: 1000480000.usb
  815.  
  816. 11:59:10.233 [info] hub 5-0:1.0: USB hub found
  817.  
  818. 11:59:10.233 [info] hub 5-0:1.0: 1 port detected
  819.  
  820. 11:59:10.457 [info] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
  821.  
  822. 11:59:10.457 [info] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Apr 15 2021 03:03:20 version 7.45.234 (4ca95bb CY) FWID 01-996384e2
  823.  
  824. 11:59:10.465 [info] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
  825.  
  826. 11:59:10.465 [info] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
  827.  
  828. 11:59:10.469 [info] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc/107c701400.hdmi/sound/card0/input0
  829.  
  830. 11:59:10.469 [info] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
  831.  
  832. 11:59:10.473 [info] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc/107c706400.hdmi/sound/card1/input1
  833.  
  834. 11:59:10.473 [info] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
  835.  
  836. 11:59:10.473 [info] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
  837.  
  838. 11:59:10.473 [info] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
  839.  
  840. 11:59:10.473 [info] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
  841.  
  842. 11:59:10.473 [info] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
  843.  
  844. 11:59:10.480 [debug] VintageNet(wlan0): :retrying -> wlan0 up
  845.  
  846. 11:59:10.480 [info] RouteManager: clear_route wlan0
  847.  
  848. 11:59:10.480 [warn] RouteManager: new set_connection_status wlan0 -> :disconnected (Elixir.VintageNet.Interface.start_configuring/3([file: ~c"lib/vintage_net/interface.ex", line: 669]))
  849.  
  850. 11:59:10.505 [info] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
  851.  
  852. 11:59:10.533 [info] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1
  853.  
  854. 11:59:10.573 [info] Bluetooth: hci0: BCM: chip id 107
  855.  
  856. 11:59:10.573 [info] Bluetooth: hci0: BCM: features 0x2f
  857.  
  858. 11:59:10.573 [info] Bluetooth: hci0: BCM4345C0
  859.  
  860. 11:59:10.574 [info] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
  861.  
  862. 11:59:10.574 [error] Bluetooth: hci0: BCM: firmware Patch file not found, tried:
  863.  
  864. 11:59:10.574 [error] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.raspberrypi,5-compute-module.hcd'
  865.  
  866. 11:59:10.586 [error] Bluetooth: hci0: BCM: 'brcm/BCM4345C0.hcd'
  867.  
  868. 11:59:10.586 [error] Bluetooth: hci0: BCM: 'brcm/BCM.raspberrypi,5-compute-module.hcd'
  869.  
  870. 11:59:10.598 [error] Bluetooth: hci0: BCM: 'brcm/BCM.hcd'
  871.  
  872. 11:59:10.633 [info] Console: switching to colour frame buffer device 240x67
  873.  
  874. 11:59:10.657 [info] vc4-drm axi:gpu: [drm] fb0: vc4drmfb frame buffer device
  875.  
  876. 11:59:10.658 [debug] Found ~r/^card[0-9]$/ in /dev/dri.
  877.  
  878. 11:59:10.658 [debug] Found ~r/^fb[0-9]$/ in /dev.
  879.  
  880. 11:59:10.717 [debug] weston: Date: 2025-02-13 UTC
  881.  
  882. 11:59:10.717 [debug] weston: [11:59:10.717] weston 13.0.3
  883.  
  884. 11:59:10.717 [debug] weston: https://wayland.freedesktop.org
  885.  
  886. 11:59:10.717 [debug] weston: Bug reports to: https://gitlab.freedesktop.org/wayland/weston/issues/
  887.  
  888. 11:59:10.717 [debug] weston: Build: 13.0.3
  889.  
  890. 11:59:10.717 [debug] weston: [11:59:10.717] Command line: /usr/bin/weston --shell=kiosk --continue-without-input
  891.  
  892. 11:59:10.717 [debug] weston: [11:59:10.717] OS: Linux, 6.6.64-v8-16k, #1 SMP PREEMPT Mon Jan 20 14:16:05 UTC 2025, aarch64
  893.  
  894. 11:59:10.717 [debug] weston: [11:59:10.717] Flight recorder: enabled
  895.  
  896. 11:59:10.717 [debug] weston: [11:59:10.717] warning: XDG_RUNTIME_DIR "/run" is not configured
  897.  
  898. 11:59:10.718 [debug] weston: correctly. Unix access mode must be 0700 (current mode is 0755),
  899.  
  900. 11:59:10.718 [debug] weston: and must be owned by the user UID 0 (current owner is UID 0).
  901.  
  902. 11:59:10.718 [debug] weston: Refer to your distribution on how to get it, or
  903.  
  904. 11:59:10.718 [debug] weston: http://www.freedesktop.org/wiki/Specifications/basedir-spec
  905.  
  906. 11:59:10.718 [debug] weston: on how to implement it.
  907.  
  908. 11:59:10.718 [debug] weston: [11:59:10.717] Starting with no config file.
  909.  
  910. 11:59:10.720 [debug] weston: [11:59:10.720] Output repaint window is 7 ms maximum.
  911.  
  912. 11:59:10.722 [debug] weston: [11:59:10.722] Loading module '/usr/lib/libweston-13/drm-backend.so'
  913.  
  914. 11:59:10.731 [debug] weston: [11:59:10.731] initializing drm backend
  915.  
  916. 11:59:10.731 [debug] weston: [11:59:10.731] Trying libseat launcher...
  917.  
  918. 11:59:10.731 [debug] weston: [11:59:10.731] [seatd/seat.c:39] Created VT-bound seat seat0
  919.  
  920. 11:59:10.731 [debug] weston: [11:59:10.731] [seatd/server.c:145] New client connected (pid: 220, uid: 0, gid: 0)
  921.  
  922. 11:59:10.731 [debug] weston: [11:59:10.731] [libseat/backend/seatd.c:633] Started embedded seatd
  923.  
  924. 11:59:10.731 [debug] weston: [11:59:10.731] [seatd/seat.c:170] Added client 1 to seat0
  925.  
  926. 11:59:10.731 [debug] weston: [11:59:10.731] [seatd/seat.c:480] Opened client 1 on seat0
  927.  
  928. 11:59:10.731 [debug] weston: [11:59:10.731] [libseat/libseat.c:73] Seat opened with backend 'builtin'
  929.  
  930. 11:59:10.731 [debug] weston: [11:59:10.731] [libseat/backend/seatd.c:212] Enabling seat
  931.  
  932. 11:59:10.732 [debug] weston: [11:59:10.731] libseat: session control granted
  933.  
  934. 11:59:10.732 [debug] weston: [11:59:10.732] using /dev/dri/card1
  935.  
  936. 11:59:10.732 [debug] weston: [11:59:10.732] DRM: supports atomic modesetting
  937.  
  938. 11:59:10.732 [debug] weston: [11:59:10.732] DRM: supports GBM modifiers
  939.  
  940. 11:59:10.732 [debug] weston: [11:59:10.732] DRM: does not support async page flipping
  941.  
  942. 11:59:10.732 [debug] weston: [11:59:10.732] DRM: supports picture aspect ratio
  943.  
  944. 11:59:10.787 [debug] weston: [11:59:10.787] Loading module '/usr/lib/libweston-13/gl-renderer.so'
  945.  
  946. 11:59:10.796 [debug] weston: [11:59:10.796] Using rendering device: /dev/dri/renderD128
  947.  
  948. 11:59:10.796 [debug] weston: [11:59:10.796] EGL version: 1.4
  949.  
  950. 11:59:10.796 [debug] weston: [11:59:10.796] EGL vendor: Mesa Project
  951.  
  952. 11:59:10.796 [debug] weston: [11:59:10.796] EGL client APIs: OpenGL OpenGL_ES
  953.  
  954. 11:59:10.796 [debug] weston: [11:59:10.796] EGL features:
  955.  
  956. 11:59:10.796 [debug] weston: EGL Wayland extension: yes
  957.  
  958. 11:59:10.796 [debug] weston: context priority: no
  959.  
  960. 11:59:10.796 [debug] weston: buffer age: yes
  961.  
  962. 11:59:10.796 [debug] weston: partial update: no
  963.  
  964. 11:59:10.796 [debug] weston: swap buffers with damage: no
  965.  
  966. 11:59:10.797 [debug] weston: configless context: yes
  967.  
  968. 11:59:10.797 [debug] weston: surfaceless context: yes
  969.  
  970. 11:59:10.797 [debug] weston: dmabuf support: modifiers
  971.  
  972. 11:59:10.797 [warn] weston[220]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
  973.  
  974. 11:59:10.817 [debug] weston: [11:59:10.817] GL version: OpenGL ES 3.1 Mesa 24.0.9
  975.  
  976. 11:59:10.817 [debug] weston: [11:59:10.817] GLSL version: OpenGL ES GLSL ES 3.10
  977.  
  978. 11:59:10.817 [debug] weston: [11:59:10.817] GL vendor: Broadcom
  979.  
  980. 11:59:10.817 [debug] weston: [11:59:10.817] GL renderer: V3D 7.1.10
  981.  
  982. 11:59:10.817 [debug] weston: [11:59:10.817] warning: Disabling render GPU timeline due to missing GL_EXT_disjoint_timer_query extension
  983.  
  984. 11:59:10.849 [debug] weston: [11:59:10.846] GL ES 3.1 - renderer features:
  985.  
  986. 11:59:10.849 [debug] weston: read-back format: ARGB8888
  987.  
  988. 11:59:10.849 [debug] weston: glReadPixels supports y-flip: yes
  989.  
  990. 11:59:10.849 [debug] weston: wl_shm 10 bpc formats: yes
  991.  
  992. 11:59:10.849 [debug] weston: wl_shm 16 bpc formats: no
  993.  
  994. 11:59:10.849 [debug] weston: wl_shm half-float formats: no
  995.  
  996. 11:59:10.849 [debug] weston: internal R and RG formats: yes
  997.  
  998. 11:59:10.849 [debug] weston: OES_EGL_image_external: yes
  999.  
  1000. 11:59:10.849 [debug] weston: [11:59:10.846] Using GL renderer
  1001.  
  1002. 11:59:10.856 [debug] weston: [11:59:10.856] event0 - vc4-hdmi-0 HDMI Jack: is tagged by udev as: Switch
  1003.  
  1004. 11:59:10.889 [debug] weston: [11:59:10.889] event0 - not using input device '/dev/input/event0'
  1005.  
  1006. 11:59:10.889 [debug] weston: [11:59:10.889] event1 - vc4-hdmi-1 HDMI Jack: is tagged by udev as: Switch
  1007.  
  1008. 11:59:10.925 [debug] weston: [11:59:10.925] event1 - not using input device '/dev/input/event1'
  1009.  
  1010. 11:59:10.925 [debug] weston: [11:59:10.925] warning: no input devices found, but none required as per configuration.
  1011.  
  1012. 11:59:10.926 [debug] weston: [11:59:10.926] DRM: head 'HDMI-A-1' found, connector 32 is disconnected.
  1013.  
  1014. 11:59:10.977 [debug] weston: [11:59:10.977] DRM: head 'HDMI-A-2' found, connector 42 is connected, EDID make 'RTK', model 'HDMI', serial 'RTD2660H'
  1015.  
  1016. 11:59:10.977 [debug] weston: Supported EOTF modes: SDR
  1017.  
  1018. 11:59:10.978 [debug] weston: [11:59:10.978] Registered plugin API 'weston_drm_output_api_v1' of size 40
  1019.  
  1020. 11:59:10.978 [debug] weston: [11:59:10.978] Color manager: no-op
  1021.  
  1022. 11:59:10.978 [debug] weston: [11:59:10.978] Output 'HDMI-A-2' attempts EOTF mode: SDR
  1023.  
  1024. 11:59:10.978 [debug] weston: [11:59:10.978] Output 'HDMI-A-2' using color profile: stock sRGB color profile
  1025.  
  1026. 11:59:10.978 [debug] weston: [11:59:10.978] Chosen EGL config details: id: 25 rgba: 8 8 8 0 buf: 24 dep: 0 stcl: 0 int: 1-1 type: win vis_id: XRGB8888 (0x34325258)
  1027.  
  1028. 11:59:10.979 [debug] weston: [11:59:10.979] Output HDMI-A-2 (crtc 105) video modes:
  1029.  
  1030. 11:59:10.979 [debug] weston: [email protected], preferred, current, 148.5 MHz
  1031.  
  1032. 11:59:10.979 [debug] weston: [email protected], 154.0 MHz
  1033.  
  1034. 11:59:10.979 [debug] weston: [email protected] 16:9, 148.5 MHz
  1035.  
  1036. 11:59:10.979 [debug] weston: [email protected] 16:9, 148.4 MHz
  1037.  
  1038. 11:59:10.979 [debug] weston: [email protected], 74.2 MHz
  1039.  
  1040. 11:59:10.979 [debug] weston: [email protected] 16:9, 74.2 MHz
  1041.  
  1042. 11:59:10.979 [debug] weston: [email protected] 16:9, 74.2 MHz
  1043.  
  1044. 11:59:10.979 [debug] weston: [email protected], 148.5 MHz
  1045.  
  1046. 11:59:10.979 [debug] weston: [email protected] 16:9, 148.5 MHz
  1047.  
  1048. 11:59:10.979 [debug] weston: [email protected], 74.2 MHz
  1049.  
  1050. 11:59:10.979 [debug] weston: [email protected] 16:9, 74.2 MHz
  1051.  
  1052. 11:59:10.979 [debug] weston: [email protected], 162.0 MHz
  1053.  
  1054. 11:59:10.979 [debug] weston: [email protected], 135.0 MHz
  1055.  
  1056. 11:59:10.979 [debug] weston: [email protected], 108.0 MHz
  1057.  
  1058. 11:59:10.979 [debug] weston: [email protected], 108.0 MHz
  1059.  
  1060. 11:59:10.979 [debug] weston: [email protected] 16:9, 74.2 MHz
  1061.  
  1062. 11:59:10.979 [debug] weston: [email protected] 16:9, 74.2 MHz
  1063.  
  1064. 11:59:10.979 [debug] weston: [email protected], 74.2 MHz
  1065.  
  1066. 11:59:10.979 [debug] weston: [email protected] 16:9, 74.2 MHz
  1067.  
  1068. 11:59:10.979 [debug] weston: [email protected], 78.8 MHz
  1069.  
  1070. 11:59:10.979 [debug] weston: [email protected], 65.0 MHz
  1071.  
  1072. 11:59:10.979 [debug] weston: [email protected], 49.5 MHz
  1073.  
  1074. 11:59:10.979 [debug] weston: [email protected], 40.0 MHz
  1075.  
  1076. 11:59:10.980 [debug] weston: [email protected], 27.0 MHz
  1077.  
  1078. 11:59:10.980 [debug] weston: [email protected] 4:3, 27.0 MHz
  1079.  
  1080. 11:59:10.980 [debug] weston: [email protected] 16:9, 27.0 MHz
  1081.  
  1082. 11:59:10.980 [debug] weston: [email protected] 4:3, 13.5 MHz
  1083.  
  1084. 11:59:10.980 [debug] weston: [email protected] 16:9, 13.5 MHz
  1085.  
  1086. 11:59:10.980 [debug] weston: [email protected] 4:3, 27.0 MHz
  1087.  
  1088. 11:59:10.980 [debug] weston: [email protected] 16:9, 27.0 MHz
  1089.  
  1090. 11:59:10.980 [debug] weston: [email protected] 4:3, 27.0 MHz
  1091.  
  1092. 11:59:10.980 [debug] weston: [email protected] 16:9, 27.0 MHz
  1093.  
  1094. 11:59:10.980 [debug] weston: [email protected] 4:3, 13.5 MHz
  1095.  
  1096. 11:59:10.980 [debug] weston: [email protected] 16:9, 13.5 MHz
  1097.  
  1098. 11:59:10.980 [debug] weston: [email protected] 4:3, 13.5 MHz
  1099.  
  1100. 11:59:10.980 [debug] weston: [email protected] 16:9, 13.5 MHz
  1101.  
  1102. 11:59:10.980 [debug] weston: [email protected], 31.5 MHz
  1103.  
  1104. 11:59:10.980 [debug] weston: [email protected] 4:3, 25.2 MHz
  1105.  
  1106. 11:59:10.980 [debug] weston: [email protected], 25.2 MHz
  1107.  
  1108. 11:59:10.980 [debug] weston: [email protected], 28.3 MHz
  1109.  
  1110. 11:59:10.980 [debug] weston: [11:59:10.979] Output 'HDMI-A-2' enabled with head(s) HDMI-A-2
  1111.  
  1112. 11:59:10.980 [debug] weston: [11:59:10.979] Compositor capabilities:
  1113.  
  1114. 11:59:10.980 [debug] weston: arbitrary surface rotation: yes
  1115.  
  1116. 11:59:10.980 [debug] weston: screen capture uses y-flip: yes
  1117.  
  1118. 11:59:10.980 [debug] weston: cursor planes: yes
  1119.  
  1120. 11:59:10.980 [debug] weston: arbitrary resolutions: no
  1121.  
  1122. 11:59:10.980 [debug] weston: view mask clipping: yes
  1123.  
  1124. 11:59:10.980 [debug] weston: explicit sync: yes
  1125.  
  1126. 11:59:10.980 [debug] weston: color operations: no
  1127.  
  1128. 11:59:10.980 [debug] weston: presentation clock: CLOCK_MONOTONIC, id 1
  1129.  
  1130. 11:59:10.981 [debug] weston: presentation clock resolution: 0.000000001 s
  1131.  
  1132. 11:59:10.981 [debug] weston: [11:59:10.980] Loading module '/usr/lib/weston/kiosk-shell.so'
  1133.  
  1134. 11:59:11.549 [debug] wpa_supplicant: Successfully initialized wpa_supplicant
  1135.  
  1136. 11:59:11.661 [debug] Found ~r/^wayland-1$/ in /run.
  1137.  
  1138. 11:59:12.157 [debug] cog: Could not determine the accessibility bus address
  1139.  
  1140. 11:59:12.501 [debug] cog: Cog-Core-Message: 11:59:12.500: <http://localhost:4000/dev/dashboard/home> Load started.
  1141.  
  1142. 11:59:12.508 [info] GET /dev/dashboard/home
  1143.  
  1144. 11:59:12.508 [debug] Processing with Phoenix.LiveDashboard.PageLive.page/2
  1145. Parameters: %{"page" => "home"}
  1146. Pipelines: [:browser]
  1147.  
  1148. 11:59:12.511 [info] Sent 200 in 2ms
  1149.  
  1150. 11:59:12.520 [debug] cog: Cog-Core-Message: 11:59:12.520: <http://localhost:4000/dev/dashboard/home> Loading...
  1151.  
  1152. 11:59:12.798 [info] CONNECTED TO Phoenix.LiveView.Socket in 43µs
  1153. Transport: :websocket
  1154. Serializer: Phoenix.Socket.V2.JSONSerializer
  1155. Parameters: %{"_csrf_token" => "AS8PCAZLPQFFZmNUdix5KgcIHm1HVFlwcVJ1srGGt5Uy3i2_vml71aaA", "vsn" => "2.0.0"}
  1156.  
  1157. 11:59:12.840 [debug] MOUNT Phoenix.LiveDashboard.PageLive
  1158. Parameters: %{"page" => "home"}
  1159. Session: %{"_csrf_token" => "byE9u9zF1S6-EEKuqerZv581", "allow_destructive_actions" => false, "csp_nonces" => %{script: nil, style: nil, img: nil}, "pages" => [home: {Phoenix.LiveDashboard.HomePage, %{home_app: {"Dashboard", :phoenix_live_dashboard}, env_keys: nil}}, os_mon: {Phoenix.LiveDashboard.OSMonPage, %{}}, memory_allocators: {Phoenix.LiveDashboard.MemoryAllocatorsPage, %{}}, metrics: {Phoenix.LiveDashboard.MetricsPage, %{metrics: {KioskExampleWeb.Telemetry, :metrics}, metrics_history: nil}}, request_logger: {Phoenix.LiveDashboard.RequestLoggerPage, %{request_logger: {"request_logger", "request_logger"}, cookie_domain: nil}}, applications: {Phoenix.LiveDashboard.ApplicationsPage, %{}}, processes: {Phoenix.LiveDashboard.ProcessesPage, %{}}, ports: {Phoenix.LiveDashboard.PortsPage, %{}}, sockets: {Phoenix.LiveDashboard.SocketsPage, %{}}, ets: {Phoenix.LiveDashboard.EtsPage, %{}}, ecto_stats: {Phoenix.LiveDashboard.EctoStatsPage, %{repos: :auto_discover, ecto_options: [ecto_psql_extras_options: [], ecto_mysql_extras_options: [], ecto_sqlite3_extras_options: []]}}], "requirements" => [application: :os_mon]}
  1160.  
  1161. 11:59:12.841 [debug] Replied in 2ms
  1162.  
  1163. 11:59:12.842 [debug] HANDLE PARAMS in Phoenix.LiveDashboard.PageLive
  1164. Parameters: %{"page" => "home"}
  1165.  
  1166. 11:59:12.842 [debug] Replied in 226µs
  1167.  
  1168. 11:59:12.858 [debug] cog: Cog-Core-Message: 11:59:12.857: <http://localhost:4000/dev/dashboard/home> Loaded successfully.
  1169.  
  1170. 11:59:14.191 [debug] [vintage_net(eth0)] starting udhcpc
  1171.  
  1172. 11:59:14.191 [info] RouteManager: set_connection_status eth0 -> :lan (ifup)
  1173.  
  1174. 11:59:14.193 [info] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
  1175.  
  1176. 11:59:14.194 [debug] udhcpc(eth0): udhcpc: started, v1.36.1
  1177.  
  1178. 11:59:14.196 [info] eth0 dhcp deconfig: %{}
  1179.  
  1180. 11:59:14.196 [info] RouteManager: clear_route eth0
  1181.  
  1182. 11:59:14.221 [debug] udhcpc(eth0): udhcpc: broadcasting discover
  1183.  
  1184.  
  1185.  
  1186. [...]# ip stuff remmoved
  1187.  
  1188.  
  1189.  
  1190. 11:59:20.817 [info] platform 1f00178000.pio: deferred probe pending
  1191.  
  1192. 12:10:39.764 [debug] server will use strict KEX ordering
  1193.  
  1194. 595 out of 595 new messages shown.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!