OPI3 Boot

U-Boot SPL 2018.09-rc1-armbian (Feb 15 2019 - 08:37:47 +0100)
DRAM: 2048 MiB
Trying to boot from MMC1
NOTICE:  BL31: v2.0(debug):eaea119
NOTICE:  BL31: Built : 22:37:52, Feb 13 2019
NOTICE:  BL31: Detected Allwinner H6 SoC (1728)
NOTICE:  BL31: Found U-Boot DTB at 0xc070e20, model: OrangePi 3
INFO:    ARM GICv2 driver initialized
NOTICE:  PMIC: Probing AXP805
NOTICE:  PMIC: AXP805 detected
INFO:    BL31: Platform setup done
INFO:    BL31: Initializing runtime services
INFO:    BL31: cortex_a53: CPU workaround for 855873 was applied
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x4a000000
INFO:    SPSR = 0x3c9


U-Boot 2018.09-rc1-armbian (Feb 15 2019 - 08:37:47 +0100) Allwinner Technology

CPU:   Allwinner H6 (SUN50I)
Model: OrangePi 3
DRAM:  2 GiB
MMC:   SUNXI SD/MMC: 0
Loading Environment from FAT... Unable to use mmc 0:1... Failed (-5)
Using device 'sun50i_dw_hdmi', disp_uc_priv=00000000b9f33320
sunxi_de3_init: device 'sunxi_de3' display won't probe (ret=-1)
Using device 'sun50i_dw_hdmi', disp_uc_priv=00000000b9f33320
sunxi_de3_init: device 'sunxi_de3' display won't probe (ret=-1)
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
starting USB...
No controllers found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3042 bytes read in 23 ms (128.9 KiB/s)
## Executing script at 4fc00000
U-boot loaded from SD
Boot script loaded from mmc
215 bytes read in 17 ms (11.7 KiB/s)
19070 bytes read in 73 ms (254.9 KiB/s)
** File not found /boot/dtb/allwinner/overlay/-fixup.scr **
8821496 bytes read in 1499 ms (5.6 MiB/s)
14422024 bytes read in 2428 ms (5.7 MiB/s)
## Loading init Ramdisk from Legacy Image at 4fe00000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    8821432 Bytes = 8.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 4fa00000
   Booting using the fdt blob at 0x4fa00000
   Loading Ramdisk to 49796000, end 49fffab8 ... OK
   reserving fdt memory region: addr=4fa00000 size=6b000
   Loading Device Tree to 0000000049728000, end 0000000049795fff ... OK
Setting up simplefb
DE3 present but not probed

Starting kernel ...


Ubuntu 18.04.2 LTS orangepi3 ttyS0

orangepi3 login: root
Password:

Login incorrect
orangepi3 login: root
Password:
Last login: Fri Feb 15 08:05:04 UTC 2019 on ttyS0
  ___                               ____  _   _____
 / _ \ _ __ __ _ _ __   __ _  ___  |  _ \(_) |___ /
| | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | |   |_ \
| |_| | | | (_| | | | | (_| |  __/ |  __/| |  ___) |
 \___/|_|  \__,_|_| |_|\__, |\___| |_|   |_| |____/
                       |___/

Welcome to ARMBIAN 5.76 user-built Ubuntu 18.04.2 LTS 4.20.8-sunxi64
System load:   0.97 0.44 0.16   Up time:       1 min
Memory usage:  4 % of 2001MB    IP:
CPU temp:      38°C
Usage of /:    4% of 29G

[ General system configuration (beta): armbian-config ]


root@orangepi3:~#