BASH - APC Status

# UPS Uptime
UPTIME=`snmpwalk -v 1 -c public 192.168.1.5 DISMAN-EVENT-MIB::sysUpTimeInstance  | awk '{print $5;}'`
UPTIMEH=`echo $UPTIME | cut --delimiter=: -f1`
UPTIMEM=`echo $UPTIME | cut --delimiter=: -f2`
UPTIMES=`echo $UPTIME | cut --delimiter=: -f3`
echo "Oppetiden er $UPTIMEH""timer $UPTIMEM""min $UPTIMES""sek"

# Battery capacety in %
BATCAP=`snmpwalk -v 1 -c public 192.168.1.5 1.3.6.1.4.1.318.1.1.1.2.2.1.0  | awk '{print $4;}'`
echo "Batteri kapaciteten er på $BATCAP%"

# UPS usage in %
UPSUSAGE=`snmpwalk -v 1 -c public 192.168.1.5 1.3.6.1.4.1.318.1.1.1.4.2.3.0 | awk '{print $4;}'`
UPSUSAGEW=`expr 40 \* $UPSUSAGE`;
echo "Forbruget på UPS'en er $UPSUSAGE%, $UPSUSAGEW""w"

# Advanced Output Frequency
OUTFREQ=`snmpwalk -v 1 -c public 192.168.1.5 1.3.6.1.4.1.318.1.1.1.4.2.2.0 | awk '{print $4;}'`
echo "Output frekvensen er $OUTFREQ""Hz"

# Advanced Output Voltage
OUTVOLT=`snmpwalk -v 1 -c public 192.168.1.5 1.3.6.1.4.1.318.1.1.1.4.2.1.0 | awk '{print $4;}'`
echo "Output volt er på $OUTVOLT""v"

#  Basic Output Status (On-line) 1 = Unknown,2 = On Line,3 = On Battery,4 = On Smart Boost,5 = Timed Sleeping,6 = Software Bypass,7 = Off,8 = Rebooting,9 = Switched Bypass,10 = Hardware Failure Bypass,11 = Sleeping Until Power Returns,12 = On Smart Trim
OUTSTATUS=`snmpwalk -v 1 -c public 192.168.1.5 1.3.6.1.4.1.318.1.1.1.4.1.1.0`

#  Basic Time on Battery, The elapsed time since the UPS has switched to battery power.
BATTIME=`snmpwalk -v 1 -c public 192.168.1.5 1.3.6.1.4.1.318.1.1.1.2.1.2.0 | awk '{print $5;}'`
echo "UPS'en har kørt $BATTIME på batteri"