Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.74+deb13+1-amd64] (local build)
- Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Samsung based SSDs
- Device Model: SAMSUNG MZ7LM240HCGR-00003
- Serial Number: S1YFNX0H400986
- LU WWN Device Id: 5 002538 c4023f317
- Firmware Version: GXT3103Q
- User Capacity: 240,057,409,536 bytes [240 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- TRIM Command: Available, deterministic, zeroed
- Device is: In smartctl database 7.3/5528
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Thu Mar 19 15:31:25 2026 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, frozen [SEC2]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x02) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 1740) seconds.
- Offline data collection
- capabilities: (0x53) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 29) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 1
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
- 9 Power_On_Hours -O--CK 092 092 000 - 38851
- 12 Power_Cycle_Count -O--CK 099 099 000 - 54
- 177 Wear_Leveling_Count PO--C- 092 092 005 - 567
- 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
- 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 1194
- 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
- 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
- 183 Runtime_Bad_Block PO--C- 100 100 010 - 0
- 184 End-to-End_Error PO--CK 100 100 097 - 0
- 187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
- 190 Airflow_Temperature_Cel -O--CK 067 053 000 - 33
- 195 ECC_Error_Rate -O-RC- 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 100 100 000 - 0
- 199 CRC_Error_Count -OSRCK 099 099 000 - 33
- 202 Exception_Mode_Status PO--CK 100 100 010 - 0
- 235 POR_Recovery_Count -O--C- 099 099 000 - 36
- 241 Total_LBAs_Written -O--CK 099 099 000 - 234943262513
- 242 Total_LBAs_Read -O--CK 099 099 000 - 64996718756
- 243 SATA_Downshift_Ct -O--CK 100 100 000 - 0
- 244 Thermal_Throttle_St -O--CK 100 100 000 - 0
- 245 Timed_Workld_Media_Wear -O--CK 100 100 000 - 65535
- 246 Timed_Workld_RdWr_Ratio -O--CK 100 100 000 - 65535
- 247 Timed_Workld_Timer -O--CK 100 100 000 - 65535
- 251 NAND_Writes -O--CK 100 100 000 - 291159870272
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 1 Comprehensive SMART error log
- 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x13 GPL R/O 1 SATA NCQ Send and Receive log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 38851 -
- # 2 Short offline Completed without error 00% 28826 -
- # 3 Short offline Completed without error 00% 28825 -
- # 4 Short offline Completed without error 00% 27877 -
- # 5 Short offline Completed without error 00% 25370 -
- # 6 Short offline Completed without error 00% 2423 -
- # 7 Short offline Completed without error 00% 2422 -
- # 8 Short offline Completed without error 00% 6 -
- # 9 Short offline Completed without error 00% 6 -
- #10 Short offline Completed without error 00% 1 -
- #11 Short offline Completed without error 00% 1 -
- #12 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- 255 0 65535 Read_scanning was completed without error
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 256 (0x0100)
- Device State: SCT command executing in background (5)
- Current Temperature: 33 Celsius
- Power Cycle Min/Max Temperature: 30/36 Celsius
- Lifetime Min/Max Temperature: 0/70 Celsius
- Under/Over Temperature Limit Count: 4294967295/4294967295
- SCT Temperature History Version: 3 (Unknown, should be 2)
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 10 minutes
- Min/Max recommended Temperature: 0/70 Celsius
- Min/Max Temperature Limit: 0/70 Celsius
- Temperature History Size (Index): 128 (11)
- Index Estimated Time Temperature Celsius
- 12 2026-03-18 18:20 33 **************
- 13 2026-03-18 18:30 34 ***************
- 14 2026-03-18 18:40 34 ***************
- 15 2026-03-18 18:50 33 **************
- 16 2026-03-18 19:00 33 **************
- 17 2026-03-18 19:10 33 **************
- 18 2026-03-18 19:20 34 ***************
- 19 2026-03-18 19:30 33 **************
- ... ..( 96 skipped). .. **************
- 116 2026-03-19 11:40 33 **************
- 117 2026-03-19 11:50 34 ***************
- 118 2026-03-19 12:00 33 **************
- ... ..( 10 skipped). .. **************
- 1 2026-03-19 13:50 33 **************
- 2 2026-03-19 14:00 34 ***************
- 3 2026-03-19 14:10 33 **************
- ... ..( 7 skipped). .. **************
- 11 2026-03-19 15:30 33 **************
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP/SMART Log 0x04) not supported
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 23 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 23 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
Advertisement
Add Comment
Please, Sign In to add comment