Advertisement
Guest User

Untitled

a guest
Aug 9th, 2013
125
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 93.39 KB | None | 0 0
  1. <6>[ 0.000000] Initializing cgroup subsys cpuset
  2. <5>[ 0.000000] Linux version 3.0.8+ (root@tom-desktop) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #167 PREEMPT Mon Oct 15 20:14:30 CST 2012
  3. <4>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387f
  4. <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. <4>[ 0.000000] Machine: sun5i
  6. <6>[ 0.000000] Total Detected Memory: 512MB with 2 banks
  7. <6>[ 0.000000] Memory Reserved(in bytes):
  8. <6>[ 0.000000] LCD: 0x48000000, 0x01000000
  9. <6>[ 0.000000] SYS: 0x43000000, 0x00010000
  10. <6>[ 0.000000] VE : 0x44000000, 0x04000000
  11. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
  12. <7>[ 0.000000] On node 0 totalpages: 114688
  13. <7>[ 0.000000] free_area_init_node: node 0, pgdat c08f8864, node_mem_map c0ab4000
  14. <7>[ 0.000000] Normal zone: 1024 pages used for memmap
  15. <7>[ 0.000000] Normal zone: 0 pages reserved
  16. <7>[ 0.000000] Normal zone: 113664 pages, LIFO batch:31
  17. <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  18. <7>[ 0.000000] pcpu-alloc: [0] 0
  19. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113664
  20. <5>[ 0.000000] Kernel command line: console=ttyS0,115200 rw init=/init loglevel=5
  21. <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  22. <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  23. <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  24. <6>[ 0.000000] Memory: 144MB 304MB = 448MB total
  25. <5>[ 0.000000] Memory: 361240k/361240k available, 97512k reserved, 0K highmem
  26. <5>[ 0.000000] Virtual kernel memory layout:
  27. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  28. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  29. <5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  30. <5>[ 0.000000] vmalloc : 0xe0800000 - 0xf0000000 ( 248 MB)
  31. <5>[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  32. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  33. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  34. <5>[ 0.000000] .init : 0xc0008000 - 0xc0032000 ( 168 kB)
  35. <5>[ 0.000000] .text : 0xc0032000 - 0xc08048f8 (8011 kB)
  36. <5>[ 0.000000] .data : 0xc0806000 - 0xc08ff728 ( 998 kB)
  37. <5>[ 0.000000] .bss : 0xc08ff74c - 0xc0ab36fc (1744 kB)
  38. <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  39. <6>[ 0.000000] NR_IRQS:96 nr_irqs:96 96
  40. <6>[ 0.000000] timer0: Periodic Mode
  41. <4>[ 0.000000] sw_timer_init,line:372
  42. <6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  43. <4>[ 0.000000] aw_clksrc_init, line:339
  44. <6>[ 0.000000] Console: colour dummy device 80x30
  45. <3>[ 0.000000] ram_console: buffer (null), invalid size 0, datasize 4294967284
  46. <6>[ 0.000117] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  47. <6>[ 0.040020] pid_max: default: 32768 minimum: 301
  48. <6>[ 0.040137] Mount-cache hash table entries: 512
  49. <6>[ 0.040449] Initializing cgroup subsys cpuacct
  50. <6>[ 0.040467] Initializing cgroup subsys devices
  51. <6>[ 0.040478] Initializing cgroup subsys freezer
  52. <6>[ 0.040487] Initializing cgroup subsys blkio
  53. <6>[ 0.040556] CPU: Testing write buffer coherency: ok
  54. <6>[ 0.040760] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  55. <6>[ 0.041267] devtmpfs: initialized
  56. <6>[ 0.042506] print_constraints: dummy:
  57. <6>[ 0.042661] NET: Registered protocol family 16
  58. <6>[ 0.043165] hw-breakpoint: debug architecture 0x4 unsupported.
  59. <4>[ 0.043587] try to parse apb frequency from script faild!
  60. <4>[ 0.043682] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  61. <6>[ 0.043742] Initialize DMAC OK
  62. <6>[ 0.047966] bio: create slab <bio-0> at 0
  63. <5>[ 0.048534] SCSI subsystem initialized
  64. <6>[ 0.048744] usbcore: registered new interface driver usbfs
  65. <6>[ 0.048810] usbcore: registered new interface driver hub
  66. <6>[ 0.048944] usbcore: registered new device driver usb
  67. <6>[ 0.049356] Advanced Linux Sound Architecture Driver Version 1.0.24.
  68. <6>[ 0.049992] cfg80211: Calling CRDA to update world regulatory domain
  69. <4>[ 0.050000] Init eGon pin module V2.0
  70. <6>[ 0.050000] Switching to clocksource aw 64bits couter
  71. <5>[ 0.050000] FS-Cache: Loaded
  72. <6>[ 0.050000] CacheFiles: Loaded
  73. <6>[ 0.050000] Switched to NOHz mode on CPU #0
  74. <4>[ 0.050000] [usb_manager]: CONFIG_USB_SW_SUN5I_USB0_OTG
  75. <4>[ 0.050000] [sw_hcd0]: usb host driver initialize........
  76. <4>[ 0.050000] [sw_hcd0]: open_usb_clock
  77. <4>[ 0.065373] [sw_hcd0]: host_init_state = 0
  78. <4>[ 0.065382] [sw_hcd0]: platform is usb host
  79. <4>[ 0.065450] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  80. <6>[ 0.065472] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  81. <6>[ 0.065489] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  82. <6>[ 0.065996] hub 1-0:1.0: USB hub found
  83. <6>[ 0.066020] hub 1-0:1.0: 1 port detected
  84. <4>[ 0.066047] wrn: hcd is not enable, need not start hcd
  85. <4>[ 0.066229] [sw_hcd0]: sw_usb_host0_disable start
  86. <4>[ 0.066241] -------sw_hcd0_soft_disconnect---------
  87. <4>[ 0.066253] [sw_hcd_host0]: Set USB Power OFF
  88. <4>[ 0.066262] wrn: hcd is not enable, need not stop hcd
  89. <4>[ 0.066294] [sw_hcd0]: close_usb_clock
  90. <4>[ 0.066334] [sw_hcd0]: sw_usb_host0_disable end
  91. <4>[ 0.066368] [sw_udc]: udc_init: version 20080411
  92. <6>[ 0.066712] NET: Registered protocol family 2
  93. <6>[ 0.066826] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  94. <6>[ 0.067086] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  95. <6>[ 0.067311] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  96. <6>[ 0.067440] TCP: Hash tables configured (established 16384 bind 16384)
  97. <6>[ 0.067451] TCP reno registered
  98. <6>[ 0.067464] UDP hash table entries: 256 (order: 0, 4096 bytes)
  99. <6>[ 0.067481] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  100. <6>[ 0.067628] NET: Registered protocol family 1
  101. <6>[ 0.067955] RPC: Registered named UNIX socket transport module.
  102. <6>[ 0.067968] RPC: Registered udp transport module.
  103. <6>[ 0.067975] RPC: Registered tcp transport module.
  104. <6>[ 0.067982] RPC: Registered tcp NFSv4.1 backchannel transport module.
  105. <6>[ 0.068156] Trying to unpack rootfs image as initramfs...
  106. <6>[ 0.111695] Freeing initrd memory: 536K
  107. <4>[ 0.111815] [pm]aw_pm_init!
  108. <6>[ 0.111828] standby_mode = 1.
  109. <6>[ 0.112028] audit: initializing netlink socket (disabled)
  110. <5>[ 0.112076] type=2000 audit(0.109:1): initialized
  111. <6>[ 0.121924] ashmem: initialized
  112. <5>[ 0.127710] VFS: Disk quotas dquot_6.5.2
  113. <4>[ 0.127876] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  114. <6>[ 0.130851] NTFS driver 2.1.30 [Flags: R/W].
  115. <6>[ 0.131157] fuse init (API version 7.16)
  116. <6>[ 0.131733] msgmni has been set to 706
  117. <6>[ 0.136121] alg: No test for stdrng (krng)
  118. <6>[ 0.136380] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  119. <6>[ 0.136400] io scheduler noop registered
  120. <6>[ 0.136409] io scheduler deadline registered
  121. <6>[ 0.136490] io scheduler cfq registered (default)
  122. <6>[ 0.137125] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  123. <6>[ 0.138803] brd: module loaded
  124. <6>[ 0.140842] loop: module loaded
  125. <4>[ 0.140862] [NAND]nand driver, init.
  126. <4>[ 0.140872] [NAND] nand driver version: 0x2, 0x10, data: 20120610
  127. <4>[ 0.140880] [NAND] nand clk request start
  128. <4>[ 0.140904] [NAND] nand clk request ok!
  129. <4>[ 0.140954] [NAND] nand gpio_request
  130. <4>[ 0.140997] [NAND] nand gpio_request fail
  131. <4>[ 0.141010] NAND_RequestDMA ok
  132. <4>[ 0.141924] [NAND] nand driver version: 0x2 0x10
  133. <4>[ 0.141954] nand interrupte register ok
  134. <4>[ 0.172752] The 0 disk name = bootloader, class name = DISK, disk size = -544396252
  135. <4>[ 0.172768] The 1 disk name = env, class name = DISK, disk size = -544396188
  136. <4>[ 0.172778] The 2 disk name = boot, class name = DISK, disk size = -544396124
  137. <4>[ 0.172787] The 3 disk name = system, class name = DISK, disk size = -544396060
  138. <4>[ 0.172797] The 4 disk name = data, class name = DISK, disk size = -544395996
  139. <4>[ 0.172807] The 5 disk name = misc, class name = DISK, disk size = -544395932
  140. <4>[ 0.172816] The 6 disk name = recovery, class name = DISK, disk size = -544395868
  141. <4>[ 0.172826] The 7 disk name = cache, class name = DISK, disk size = -544395804
  142. <4>[ 0.172836] The 8 disk name = databk, class name = DISK, disk size = -544395740
  143. <4>[ 0.172846] The 9 disk name = UDISK, class name = DISK, disk size = -544395676
  144. <4>[ 0.172856] The 9 disk size = 10846208
  145. <4>[ 0.172862] part total count = 10
  146. <6>[ 0.174298] nanda:
  147. <6>[ 0.176398] nandb: unknown partition table
  148. <6>[ 0.177947] nandc: unknown partition table
  149. <6>[ 0.179455] nandd: unknown partition table
  150. <6>[ 0.180961] nande: unknown partition table
  151. <6>[ 0.182542] nandf: unknown partition table
  152. <6>[ 0.184060] nandg: unknown partition table
  153. <6>[ 0.185620] nandh: unknown partition table
  154. <6>[ 0.187158] nandi: unknown partition table
  155. <6>[ 0.188704] nandj: unknown partition table
  156. <6>[ 0.188876] benn: nand probe enter
  157. <4>[ 0.188918] [NAND]nand driver, ok.
  158. <4>[ 0.189260] drivers/spi/spi_sunxi.c(L2114) sw spi init fetch spi0 uning configuration failed
  159. <4>[ 0.189281] drivers/spi/spi_sunxi.c(L2005) Get spi devices number failed
  160. <4>[ 0.189292] drivers/spi/spi_sunxi.c(L2124) register spi devices board info failed
  161. <4>[ 0.189305] cannot find any using configuration for all spi controllers!
  162. <6>[ 0.189329] PPP generic driver version 2.4.2
  163. <6>[ 0.189553] PPP Deflate Compression module registered
  164. <6>[ 0.189564] PPP BSD Compression module registered
  165. <6>[ 0.190631] PPP MPPE Compression module registered
  166. <6>[ 0.190648] NET: Registered protocol family 24
  167. <6>[ 0.190698] PPTP driver version 0.8.5
  168. <6>[ 0.191032] tun: Universal TUN/TAP device driver, 1.6
  169. <6>[ 0.191044] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  170. <6>[ 0.191319] usbcore: registered new interface driver cdc_ether
  171. <6>[ 0.191371] usbcore: registered new interface driver cdc_eem
  172. <6>[ 0.191430] usbcore: registered new interface driver cdc_subset
  173. <6>[ 0.191480] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  174. <6>[ 0.191544] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  175. <6>[ 0.191584] Initializing USB Mass Storage driver...
  176. <6>[ 0.191688] usbcore: registered new interface driver usb-storage
  177. <6>[ 0.191696] USB Mass Storage support registered.
  178. <6>[ 0.191744] usbcore: registered new interface driver ums-alauda
  179. <6>[ 0.191792] usbcore: registered new interface driver ums-cypress
  180. <6>[ 0.191839] usbcore: registered new interface driver ums-datafab
  181. <6>[ 0.191890] usbcore: registered new interface driver ums_eneub6250
  182. <6>[ 0.191935] usbcore: registered new interface driver ums-freecom
  183. <6>[ 0.191982] usbcore: registered new interface driver ums-isd200
  184. <6>[ 0.192026] usbcore: registered new interface driver ums-jumpshot
  185. <6>[ 0.192071] usbcore: registered new interface driver ums-karma
  186. <6>[ 0.192122] usbcore: registered new interface driver ums-onetouch
  187. <6>[ 0.192181] usbcore: registered new interface driver ums-realtek
  188. <6>[ 0.192232] usbcore: registered new interface driver ums-sddr09
  189. <6>[ 0.192278] usbcore: registered new interface driver ums-sddr55
  190. <6>[ 0.192326] usbcore: registered new interface driver ums-usbat
  191. <6>[ 0.192457] usbcore: registered new interface driver usbserial
  192. <6>[ 0.192500] USB Serial support registered for generic
  193. <6>[ 0.192553] usbcore: registered new interface driver usbserial_generic
  194. <6>[ 0.192562] usbserial: USB Serial Driver core
  195. <6>[ 0.192601] USB Serial support registered for GSM modem (1-port)
  196. <6>[ 0.192726] usbcore: registered new interface driver option
  197. <6>[ 0.192734] option: v0.7.2:USB Driver for GSM modems
  198. <4>[ 0.192769] ------print_msc_config-----
  199. <4>[ 0.192777] vendor_id = 0x18d1
  200. <4>[ 0.192786] mass_storage_id = 0x1
  201. <4>[ 0.192792] adb_id = 0x2
  202. <4>[ 0.192798] usb_manufacturer_name = USB Developer
  203. <4>[ 0.192805] usb_product_name = Android
  204. <4>[ 0.192812] usb_serial_number = 20080411
  205. <4>[ 0.192819] msc_vendor_name = USB 2.0
  206. <4>[ 0.192825] msc_product_name = USB Flash Driver
  207. <4>[ 0.192832] msc_release = 100
  208. <4>[ 0.192838] luns = 2
  209. <4>[ 0.192844] ---------------------------
  210. <4>[ 0.192996] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
  211. <4>[ 0.193011] [sw_udc]: alloc request: ep(0xc08e2428, ep0, 64), req(0xdfbe0f00)
  212. <4>[ 0.193029] WRN:L2694(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
  213. <4>[ 0.193041] [sw_udc]: sw_udc_pullup, is_on = 0
  214. <4>[ 0.193052] WRN:L2729(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
  215. <6>[ 0.194260] android_usb gadget: Mass Storage Function, version: 2009/09/11
  216. <6>[ 0.194277] android_usb gadget: Number of LUNs=2
  217. <6>[ 0.194287] lun0: LUN: removable file: (no medium)
  218. <6>[ 0.194296] lun1: LUN: removable file: (no medium)
  219. <4>[ 0.194305] lun name: lun
  220. <4>[ 0.194316] lun name: lun1
  221. <4>[ 0.194474] WRN:L2694(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
  222. <6>[ 0.194497] android_usb gadget: android_usb ready
  223. <6>[ 0.194619] mousedev: PS/2 mouse device common for all mice
  224. <6>[ 0.194862] input: sun4i-keyboard as /devices/virtual/input/input0
  225. <4>[ 0.194973] ==register_early_suspend =
  226. <6>[ 0.195374] i2c /dev entries driver
  227. <4>[ 0.195497] !!! base_Addr = 0xe08eac00
  228. <4>[ 0.195520] config i2c gpio with gpio_config api
  229. <4>[ 0.195575] twi0, apb clock = 24000000
  230. <6>[ 0.197458] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  231. <4>[ 0.198401] rtc_detect,line:197
  232. <6>[ 0.198411] I2C: i2c-0: AW16XX I2C adapter
  233. <4>[ 0.198417] **********start************
  234. <4>[ 0.198424] 0x40
  235. <4>[ 0.198429] 0xf8
  236. <4>[ 0.198434] 0x28
  237. <4>[ 0.198439] 0x0
  238. <4>[ 0.198444] 0x0
  239. <4>[ 0.198448] **********end************
  240. <4>[ 0.198491] !!! base_Addr = 0xe08ec000
  241. <4>[ 0.198542] twi1, apb clock = 24000000
  242. <6>[ 0.198764] rtc_detect: Detected chip pcf8563 at adapter 1, address 0x51
  243. <6>[ 0.198839] pcf8563 1-0051: chip found, driver version 0.4.3
  244. <4>[ 0.202555] rtc (null): alarm rollover not handled
  245. <6>[ 0.202764] using rtc device, pcf8563, for alarms
  246. <6>[ 0.202797] pcf8563 1-0051: rtc core: registered pcf8563 as rtc0
  247. <6>[ 0.205331] I2C: i2c-1: AW16XX I2C adapter
  248. <4>[ 0.205338] **********start************
  249. <4>[ 0.205344] 0x40
  250. <4>[ 0.205349] 0xf8
  251. <4>[ 0.205354] 0x58
  252. <4>[ 0.205359] 0x0
  253. <4>[ 0.205363] 0x0
  254. <4>[ 0.205368] **********end************
  255. <4>[ 0.205417] !!! base_Addr = 0xe08ee400
  256. <4>[ 0.205465] twi2, apb clock = 24000000
  257. <4>[ 0.205647] rtc_detect,line:197
  258. <6>[ 0.205657] I2C: i2c-2: AW16XX I2C adapter
  259. <4>[ 0.205663] **********start************
  260. <4>[ 0.205669] 0x40
  261. <4>[ 0.205674] 0xf8
  262. <4>[ 0.205679] 0x58
  263. <4>[ 0.205683] 0x0
  264. <4>[ 0.205688] 0x0
  265. <4>[ 0.205692] **********end************
  266. <6>[ 0.205842] lirc_dev: IR Remote Control driver registered, major 250
  267. <6>[ 0.205852] IR NEC protocol handler initialized
  268. <6>[ 0.205859] IR RC5(x) protocol handler initialized
  269. <6>[ 0.205867] IR RC6 protocol handler initialized
  270. <6>[ 0.205873] IR JVC protocol handler initialized
  271. <6>[ 0.205880] IR Sony protocol handler initialized
  272. <6>[ 0.205887] IR RC5 (streamzap) protocol handler initialized
  273. <6>[ 0.205894] IR LIRC bridge handler initialized
  274. <6>[ 0.205901] Linux video capture interface: v2.00
  275. <4>[ 0.205928] [pa_drv] start!!!
  276. <4>[ 0.206181] [pa_drv] init end!!!
  277. <6>[ 0.206282] print_constraints: axp20_ldo1: 1300 mV
  278. <6>[ 0.207208] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  279. <6>[ 0.208137] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 3300 mV
  280. <6>[ 0.209032] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 3300 mV
  281. <6>[ 0.209917] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
  282. <6>[ 0.210879] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1200 mV
  283. <6>[ 0.211291] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  284. <6>[ 0.211557] input: axp20-supplyer as /devices/platform/sun5i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
  285. <4>[ 0.218777] pmu_pekoff_time = 6000
  286. <4>[ 0.218788] pmu_pekoff_en = 1
  287. <4>[ 0.218794] pmu_peklong_time = 1500
  288. <4>[ 0.218800] pmu_pekon_time = 1000
  289. <4>[ 0.218806] pmu_pwrok_time = 64
  290. <4>[ 0.218812] pmu_pwrnoe_time = 2000
  291. <4>[ 0.218818] pmu_intotp_en = 1
  292. <4>[ 0.219281] [AXP]POWER20_OFF_CTL:1974-->0x42
  293. <4>[ 0.219745] POWER20_PEK_SET:1991-->0x9d
  294. <4>[ 0.220274] POWER20_PEK_SET:2002-->0x9d
  295. <4>[ 0.220750] POWER20_PEK_SET:2011-->0x9d
  296. <4>[ 0.221222] POWER20_PEK_SET:2022-->0x9d
  297. <4>[ 0.221694] POWER20_PEK_SET:2034-->0x9d
  298. <4>[ 0.222166] POWER20_HOTOVER_CTL:2043-->0xad
  299. <4>[ 0.225904] [AXP]last_rest_vol = 100, now_rest_vol = 97
  300. <4>[ 0.227419] [AXP]Cur_CoulombCounter = -47
  301. <4>[ 0.227431] [AXP]charger->rest_vol = 99
  302. <6>[ 0.230289] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  303. <6>[ 0.230722] device-mapper: multipath: version 1.3.0 loaded
  304. <6>[ 0.230737] device-mapper: multipath round-robin: version 1.0.0 loaded
  305. <6>[ 0.230748] device-mapper: multipath queue-length: version 0.1.0 loaded
  306. <6>[ 0.230763] device-mapper: multipath service-time: version 0.2.0 loaded
  307. <4>[ 0.231279] [mmc_pm]: no sdio card used in configuration
  308. <4>[ 0.231290] [mmc]: sunximmc_init
  309. <4>[ 0.231398] [mmc]: sunxi mmc controller using config : 0x1
  310. <4>[ 0.231460] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  311. <4>[ 0.231780] [mmc]: mmc 0 power off !!
  312. <4>[ 0.231865] [mmc]: mmc0 Probe: base:0xe08f0000 irq:32 dma:0 pdes:0xdf020000, ret 0.
  313. <6>[ 0.232557] usbcore: registered new interface driver usbhid
  314. <6>[ 0.232567] usbhid: USB HID core driver
  315. <6>[ 0.233034] logger: created 256K log 'log_main'
  316. <6>[ 0.233117] logger: created 256K log 'log_events'
  317. <6>[ 0.233188] logger: created 256K log 'log_radio'
  318. <6>[ 0.233257] logger: created 256K log 'log_system'
  319. <4>[ 0.233776] enter sun5i Audio codec!!!
  320. <6>[ 0.234474] sun5i audio support initialized
  321. <4>[ 0.234693] sun5i Audio codec successfully loaded..
  322. <6>[ 0.234740] ALSA device list:
  323. <6>[ 0.234749] #0: sun5i-CODEC Audio Codec
  324. <6>[ 0.234907] Netfilter messages via NETLINK v0.30.
  325. <6>[ 0.234995] nf_conntrack version 0.5.0 (5652 buckets, 22608 max)
  326. <6>[ 0.235492] ctnetlink v0.93: registering with nfnetlink.
  327. <6>[ 0.235508] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  328. <6>[ 0.235516] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  329. <6>[ 0.235788] IPv4 over IPv4 tunneling driver
  330. <6>[ 0.236097] GRE over IPv4 demultiplexor driver
  331. <6>[ 0.236108] GRE over IPv4 tunneling driver
  332. <6>[ 0.236580] ip_tables: (C) 2000-2006 Netfilter Core Team
  333. <6>[ 0.236737] TCP cubic registered
  334. <6>[ 0.236747] Initializing XFRM netlink socket
  335. <6>[ 0.237446] NET: Registered protocol family 10
  336. <6>[ 0.238234] ip6_tables: (C) 2000-2006 Netfilter Core Team
  337. <6>[ 0.238397] IPv6 over IPv4 tunneling driver
  338. <6>[ 0.239140] NET: Registered protocol family 17
  339. <6>[ 0.239181] NET: Registered protocol family 15
  340. <6>[ 0.239196] L2TP core driver, V2.0
  341. <6>[ 0.239215] PPPoL2TP kernel driver, V2.0
  342. <6>[ 0.239221] L2TP IP encapsulation support (L2TPv3)
  343. <6>[ 0.239454] L2TP netlink interface
  344. <6>[ 0.239489] L2TP ethernet pseudowire support (L2TPv3)
  345. <6>[ 0.239498] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  346. <5>[ 0.239529] Registering SWP/SWPB emulation handler
  347. <4>[ 0.239790] dram_sysdev_init finished!
  348. <6>[ 0.240788] registered taskstats version 1
  349. <4>[ 0.240814] [LCD] lcd_module_init
  350. <4>[ 0.800035] [DISP] *****************************************************************
  351. <4>[ 0.800060] [DISP] ***
  352. <4>[ 0.800066] [DISP] *** LCD Panel Parameter Check
  353. <4>[ 0.800073] [DISP] ***
  354. <4>[ 0.800079] [DISP] *** by dulianping
  355. <4>[ 0.800086] [DISP] ***
  356. <4>[ 0.800091] [DISP] *****************************************************************
  357. <4>[ 0.800100] [DISP] ***
  358. <4>[ 0.800106] [DISP] *** Interface:
  359. <4>[ 0.800113] [DISP] *** Parallel HV Panel
  360. <4>[ 0.800120] [DISP] *** Lcd Frm to RGB666
  361. <4>[ 0.800126] [DISP] ***
  362. <4>[ 0.800132] [DISP] *** Timing:
  363. <4>[ 0.800138] [DISP] *** lcd_x: 800
  364. <4>[ 0.800146] [DISP] *** lcd_y: 480
  365. <4>[ 0.800154] [DISP] *** lcd_ht: 928
  366. <4>[ 0.800160] [DISP] *** lcd_hbp: 88
  367. <4>[ 0.800167] [DISP] *** lcd_vt: 1050
  368. <4>[ 0.800175] [DISP] *** lcd_vbp: 32
  369. <4>[ 0.800181] [DISP] *** lcd_hspw: 30
  370. <4>[ 0.800190] [DISP] *** lcd_vspw: 13
  371. <4>[ 0.800197] [DISP] *** lcd_frame_frq: 80Hz
  372. <4>[ 0.800204] [DISP] ***
  373. <4>[ 0.800210] [DISP] *** WRN03: Recommend "lcd_dclk_frq = 29"
  374. <4>[ 0.800219] [DISP] ***
  375. <4>[ 0.800224] [DISP] *** LCD Panel Parameter Check End
  376. <4>[ 0.800232] [DISP] *****************************************************************
  377. <4>[ 0.803886] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
  378. <4>[ 0.804156] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
  379. <4>[ 0.804424] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
  380. <4>[ 0.804690] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
  381. <4>[ 0.804957] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
  382. <4>[ 0.805943] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a957c
  383. <4>[ 0.805969] [sw-ehci1]: open clock
  384. <4>[ 0.825969] usb_passby en=1,passly=0
  385. <4>[ 0.825980] hci_port_configure en=1,config_cnt=0
  386. <4>[ 0.825990] [sw-ehci1]: Set USB Power ON
  387. <6>[ 0.826746] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  388. <6>[ 0.826780] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  389. <6>[ 0.826897] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  390. <6>[ 0.840047] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  391. <4>[ 0.840062] ehci_irq: port change detect
  392. <6>[ 0.840628] hub 2-0:1.0: USB hub found
  393. <6>[ 0.840654] hub 2-0:1.0: 1 port detected
  394. <4>[ 0.840885] [sw-ehci1]: sw_usb_disable_ehci
  395. <4>[ 0.840901] [sw-ehci1]: remove, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a957c
  396. <6>[ 0.840912] sw-ehci sw-ehci.1: remove, state 1
  397. <6>[ 0.840930] usb usb2: USB disconnect, device number 1
  398. <6>[ 0.841966] sw-ehci sw-ehci.1: USB bus 2 deregistered
  399. <4>[ 0.841983] [sw-ehci1]: Set USB Power OFF
  400. <4>[ 0.842469] hci_port_configure en=0,config_cnt=1
  401. <4>[ 0.842479] usb_passby en=0,passly=1
  402. <4>[ 0.842486] [sw-ehci1]: close clock
  403. <4>[ 0.842643] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a9694
  404. <4>[ 0.842657] [sw-ohci1]: open clock
  405. <4>[ 0.862675] hci_port_configure en=1,config_cnt=0
  406. <4>[ 0.862684] usb_passby en=1,passly=0
  407. <4>[ 0.862691] [sw-ohci1]: Set USB Power ON
  408. <6>[ 0.863435] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  409. <6>[ 0.863465] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  410. <6>[ 0.863506] sw-ohci sw-ohci.1: irq 40, io mem 0xf1c14400
  411. <6>[ 0.924457] hub 2-0:1.0: USB hub found
  412. <6>[ 0.924483] hub 2-0:1.0: 1 port detected
  413. <4>[ 0.924684] [sw-ohci1]: sw_usb_disable_ohci
  414. <4>[ 0.924697] [sw-ohci1]: remove, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a9694
  415. <6>[ 0.924707] sw-ohci sw-ohci.1: remove, state 1
  416. <6>[ 0.924722] usb usb2: USB disconnect, device number 1
  417. <6>[ 0.925056] sw-ohci sw-ohci.1: USB bus 2 deregistered
  418. <4>[ 0.925072] [sw-ohci1]: Set USB Power OFF
  419. <4>[ 0.925556] usb_passby en=0,passly=1
  420. <4>[ 0.925564] hci_port_configure en=0,config_cnt=1
  421. <4>[ 0.925571] [sw-ohci1]: close clock
  422. <6>[ 0.926631] pcf8563 1-0051: setting system clock to 2013-08-09 15:38:10 UTC (1376062690)
  423. <4>[ 0.926749] Warning: unable to open an initial console.
  424. <6>[ 0.926819] Freeing init memory: 168K
  425. <3>[ 0.981728] init: width = 800
  426. <3>[ 0.981752] init: height = 480
  427. <3>[ 0.981764] init: s.st_size = 1536000
  428. <6>[ 0.991083] init: command 'loglevel' r=0
  429. <6>[ 0.991130] init: command 'export' r=0
  430. <6>[ 0.991144] init: command 'export' r=0
  431. <6>[ 0.991158] init: command 'export' r=0
  432. <6>[ 0.991171] init: command 'export' r=0
  433. <6>[ 0.991185] init: command 'export' r=0
  434. <6>[ 0.991198] init: command 'export' r=0
  435. <6>[ 0.991211] init: command 'export' r=0
  436. <6>[ 0.991224] init: command 'export' r=0
  437. <6>[ 0.991239] init: command 'export' r=0
  438. <6>[ 0.991345] init: command 'symlink' r=0
  439. <6>[ 0.991386] init: command 'symlink' r=0
  440. <6>[ 0.991421] init: command 'symlink' r=0
  441. <6>[ 0.991447] init: command 'mkdir' r=0
  442. <6>[ 0.991703] init: command 'mount' r=0
  443. <6>[ 0.991825] init: command 'mkdir' r=0
  444. <6>[ 0.991866] init: command 'mkdir' r=0
  445. <6>[ 0.991900] init: command 'mkdir' r=0
  446. <6>[ 0.991934] init: command 'mkdir' r=0
  447. <6>[ 0.991963] init: command 'mkdir' r=0
  448. <6>[ 0.991993] init: command 'mkdir' r=0
  449. <6>[ 0.992025] init: command 'mkdir' r=0
  450. <6>[ 0.992053] init: command 'mkdir' r=0
  451. <6>[ 0.992082] init: command 'mkdir' r=0
  452. <6>[ 0.992185] init: command 'mount' r=0
  453. <6>[ 0.992220] init: command 'mkdir' r=0
  454. <6>[ 0.992294] init: command 'mount' r=0
  455. <6>[ 0.992419] init: command 'write' r=0
  456. <6>[ 0.992506] init: command 'write' r=-2
  457. <6>[ 0.992580] init: command 'write' r=0
  458. <6>[ 0.992632] init: command 'write' r=0
  459. <6>[ 0.992675] init: command 'write' r=0
  460. <6>[ 0.992721] init: command 'write' r=-2
  461. <6>[ 0.992763] init: command 'write' r=0
  462. <6>[ 0.992800] init: command 'mkdir' r=0
  463. <6>[ 0.992870] init: command 'mount' r=-1
  464. <6>[ 0.992896] init: command 'chown' r=0
  465. <6>[ 0.992921] init: command 'chown' r=-2
  466. <6>[ 0.992944] init: command 'chmod' r=-2
  467. <6>[ 0.993035] init: command 'write' r=0
  468. <6>[ 0.993070] init: command 'mkdir' r=0
  469. <6>[ 0.993096] init: command 'chown' r=-2
  470. <6>[ 0.993119] init: command 'chmod' r=-2
  471. <6>[ 0.993173] init: command 'write' r=0
  472. <6>[ 0.993201] init: command 'mkdir' r=0
  473. <6>[ 0.993227] init: command 'chown' r=-2
  474. <6>[ 0.993249] init: command 'chmod' r=-2
  475. <6>[ 0.993299] init: command 'write' r=0
  476. <6>[ 0.993323] init: command 'chmod' r=0
  477. <6>[ 0.993354] init: processing action 0x1ef5a00 (fs)
  478. <6>[ 1.003587] EXT4-fs (nandd): barriers disabled
  479. <6>[ 1.005607] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: barrier=0
  480. <6>[ 1.005679] init: command 'mount' r=0
  481. <6>[ 1.005746] init: command 'wait' r=0
  482. <6>[ 1.016065] EXT4-fs (nande): barriers disabled
  483. <6>[ 1.017371] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0
  484. <6>[ 1.017541] init: command 'mount' r=0
  485. <6>[ 1.017694] init: command 'setupfs' r=0
  486. <3>[ 1.017712] init: do_umount: /data
  487. <6>[ 1.020136] init: command 'umount' r=0
  488. <6>[ 1.109080] init: command 'exec' r=0
  489. <6>[ 1.197450] EXT4-fs (nande): barriers disabled
  490. <6>[ 1.198856] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
  491. <6>[ 1.199228] init: command 'exec' r=0
  492. <3>[ 1.200596] EXT4-fs (nandh): VFS: Can't find ext4 filesystem
  493. <6>[ 1.210083] init: command 'mount' r=-1
  494. <3>[ 1.210199] init: buffer : /dev/block/nandh[mmc]: mmc 0 detect change, present 1
  495. <4>[ 1.530084] [mmc]: mmc 0 power on !!
  496. <4>[ 1.570827] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52, RTO !!
  497. <4>[ 1.571660] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 52, RTO !!
  498. <4>[ 1.576136] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  499. <4>[ 1.576940] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  500. <4>[ 1.577743] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  501. <4>[ 1.578546] [mmc]: sdxc_request_done(L1114): smc 0 err, cmd 5, RTO !!
  502. <6>[ 1.612365] mmc0: new high speed SDHC card at address 0007
  503. <6>[ 1.612975] mmcblk0: mmc0:0007 SD32G 29.3 GiB
  504. <6>[ 1.616309] mmcblk0: p1
  505. <4>[ 2.080053]
  506. <4>[ 2.080068]
  507. <4>[ 2.080071] insmod_device_driver
  508. <4>[ 2.080075]
  509. <4>[ 2.080086] [sw_udc]: sw_usb_device_enable start
  510. <4>[ 2.080098] [sw_udc]: usb_vbase = 0xf1c13000
  511. <4>[ 2.080107] [sw_udc]: sram_vbase = 0xf1c00000
  512. <4>[ 2.080134] [sw_udc]: open_usb_clock
  513. <4>[ 2.105523] [sw_udc]: usbd_stop_work
  514. <4>[ 2.105568] [sw_udc]: sw_usb_device_enable end
  515. <6>[ 4.827011] init: command 'setupfs' r=1
  516. <3>[ 4.827075] init: do_umount: /cache
  517. <3>[ 4.827119] init: do_umount error = Invalid argument
  518. <6>[ 4.827131] init: command 'umount' r=-1
  519. <6>[ 4.844551] init: command 'exec' r=0
  520. <6>[ 4.856116] EXT4-fs (nandh): barriers disabled
  521. <6>[ 4.858273] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
  522. <6>[ 4.858632] init: command 'exec' r=0
  523. <3>[ 4.860132] init: start format /dev/block/nandj
  524. <3>[ 4.860427] init: wait for format /dev/block/nandj
  525. <3>[ 4.860799] init: fork to format /dev/block/nandjset usbcur 0 mA
  526. <4>[ 7.240340] set usbvol 4000 mV
  527. <3>[ 7.657713] init: format /dev/block/nandj ok
  528. <6>[ 7.657750] init: command 'format_userdata' r=1
  529. <6>[ 7.657837] init: command 'wait' r=0
  530. <3>[ 7.659153] EXT4-fs (nandi): VFS: Can't find ext4 filesystem
  531. <6>[ 7.660178] init: command 'mount' r=-1
  532. <3>[ 7.660301] init: buffer : /dev/block/nandi
  533. <6>[ 10.551133] init: command 'setupfs' r=1
  534. <3>[ 10.551193] init: do_umount: /databk
  535. <3>[ 10.551239] init: do_umount error = Invalid argument
  536. <6>[ 10.551252] init: command 'umount' r=-1
  537. <6>[ 10.551310] init: command 'rmdir' r=0
  538. <6>[ 10.551333] init: processing action 0x1ef00a0 (post-fs)
  539. <6>[ 10.551442] init: command 'chown' r=0
  540. <6>[ 10.551478] init: command 'chmod' r=0
  541. <6>[ 11.261419] init: command 'chown' r=-2
  542. <6>[ 11.261480] init: command 'chmod' r=-2
  543. <6>[ 11.261565] init: command 'chown' r=0
  544. <6>[ 11.261604] init: command 'chmod' r=0
  545. <6>[ 11.261639] init: command 'chown' r=0
  546. <6>[ 11.261668] init: command 'chmod' r=0
  547. <6>[ 11.261721] init: command 'chown' r=0
  548. <6>[ 11.261752] init: command 'chmod' r=0
  549. <6>[ 11.261862] init: command 'mkdir' r=0
  550. <6>[ 11.261895] init: processing action 0x1ef0290 (post-fs-data)
  551. <6>[ 11.261954] init: command 'chown' r=0
  552. <6>[ 11.261986] init: command 'chmod' r=0
  553. <6>[ 11.271229] init: command 'mkdir' r=0
  554. <6>[ 11.271298] init: command 'copy' r=-1
  555. <6>[ 11.274264] init: command 'chown' r=-2
  556. <6>[ 11.274299] init: command 'chmod' r=-2
  557. <6>[ 11.274333] init: command 'copy' r=-1
  558. <6>[ 11.274367] init: command 'chown' r=-2
  559. <6>[ 11.274386] init: command 'chmod' r=-2
  560. <6>[ 11.274425] init: command 'write' r=-2
  561. <6>[ 11.274520] init: command 'mkdir' r=0
  562. <6>[ 11.275663] init: command 'mkdir' r=0
  563. <6>[ 11.275728] init: command 'mkdir' r=0
  564. <6>[ 11.275789] init: command 'mkdir' r=0
  565. <6>[ 11.275845] init: command 'mkdir' r=0
  566. <6>[ 11.275903] init: command 'mkdir' r=0
  567. <6>[ 11.275961] init: command 'mkdir' r=0
  568. <6>[ 11.276020] init: command 'mkdir' r=0
  569. <6>[ 11.277023] init: command 'mkdir' r=0
  570. <6>[ 11.277060] init: command 'chmod' r=-2
  571. <6>[ 11.277119] init: command 'mkdir' r=0
  572. <6>[ 11.277148] init: command 'chown' r=0
  573. <6>[ 11.277204] init: command 'mkdir' r=0
  574. <6>[ 11.277279] init: command 'chmod' r=0
  575. <6>[ 11.278312] init: command 'chmod' r=0
  576. <6>[ 11.278365] init: command 'chmod' r=0
  577. <6>[ 11.278422] init: command 'chmod' r=0
  578. <6>[ 11.278465] init: command 'chmod' r=0
  579. <6>[ 11.278532] init: command 'mkdir' r=0
  580. <6>[ 11.279534] init: command 'mkdir' r=0
  581. <6>[ 11.279604] init: command 'mkdir' r=0
  582. <6>[ 11.279668] init: command 'mkdir' r=0
  583. <6>[ 11.279725] init: command 'mkdir' r=0
  584. <6>[ 11.279783] init: command 'mkdir' r=0
  585. <6>[ 11.279841] init: command 'mkdir' r=0
  586. <6>[ 11.279896] init: command 'mkdir' r=0
  587. <6>[ 11.279956] init: command 'mkdir' r=0
  588. <6>[ 11.279986] init: command 'chown' r=0
  589. <6>[ 11.280075] init: command 'chmod' r=0
  590. <6>[ 11.280143] init: command 'mkdir' r=0
  591. <6>[ 11.280201] init: command 'mkdir' r=0
  592. <6>[ 11.280374] init: command 'chown' r=0
  593. <6>[ 11.280446] init: command 'chmod' r=0
  594. <6>[ 11.280506] init: command 'chown' r=0
  595. <6>[ 11.280551] init: command 'chmod' r=0
  596. <6>[ 11.280567] init: processing action 0x1ef6190 (property_service_init)
  597. <6>[ 11.285074] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
  598. <6>[ 11.285117] init: command 'property_service_init' r=0
  599. <6>[ 11.285150] init: processing action 0x1ef61d8 (signal_init)
  600. <6>[ 11.285232] init: command 'signal_init' r=0
  601. <6>[ 11.285250] init: processing action 0x1ef6220 (check_startup)
  602. <6>[ 11.285296] init: command 'check_startup' r=0
  603. <6>[ 11.285323] init: processing action 0x1ef0a80 (boot)
  604. <6>[ 11.286457] init: command 'chown' r=0
  605. <6>[ 11.286499] init: command 'chmod' r=0
  606. <6>[ 11.287058] init: command 'ifup' r=0
  607. <6>[ 11.287181] init: command 'hostname' r=0
  608. <6>[ 11.287234] init: command 'domainname' r=0
  609. <6>[ 11.287259] init: command 'setrlimit' r=0
  610. <6>[ 11.287326] init: command 'write' r=0
  611. <6>[ 11.287376] init: command 'write' r=0
  612. <6>[ 11.287490] init: command 'chown' r=0
  613. <6>[ 11.287528] init: command 'chmod' r=0
  614. <6>[ 11.287570] init: command 'chown' r=0
  615. <6>[ 11.287598] init: command 'chmod' r=0
  616. <4>[ 11.287681] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  617. <6>[ 11.287703] init: command 'write' r=0
  618. <6>[ 11.287755] init: command 'write' r=0
  619. <6>[ 11.287801] init: command 'write' r=0
  620. <6>[ 11.287834] init: command 'chown' r=-2
  621. <6>[ 11.287858] init: command 'chown' r=-2
  622. <6>[ 11.287881] init: command 'chown' r=-2
  623. <6>[ 11.287904] init: command 'chown' r=-2
  624. <6>[ 11.287927] init: command 'chown' r=-2
  625. <6>[ 11.287981] init: command 'chown' r=0
  626. <6>[ 11.288014] init: command 'chown' r=0
  627. <6>[ 11.288045] init: command 'chown' r=0
  628. <6>[ 11.288072] init: command 'chmod' r=0
  629. <6>[ 11.288094] init: command 'chmod' r=0
  630. <6>[ 11.288116] init: command 'chmod' r=0
  631. <6>[ 11.288165] init: command 'chown' r=0
  632. <6>[ 11.288192] init: command 'chmod' r=0
  633. <6>[ 11.288230] init: command 'chown' r=-2
  634. <6>[ 11.288265] init: command 'chown' r=-2
  635. <6>[ 11.288291] init: command 'chown' r=-2
  636. <6>[ 11.288316] init: command 'chown' r=-2
  637. <6>[ 11.288340] init: command 'chown' r=-2
  638. <6>[ 11.288364] init: command 'chown' r=-2
  639. <6>[ 11.288388] init: command 'chown' r=-2
  640. <6>[ 11.288413] init: command 'chown' r=-2
  641. <6>[ 11.288436] init: command 'chown' r=-2
  642. <6>[ 11.288460] init: command 'chown' r=-2
  643. <6>[ 11.288484] init: command 'chown' r=-2
  644. <6>[ 11.288507] init: command 'chown' r=-2
  645. <6>[ 11.288531] init: command 'chown' r=-2
  646. <6>[ 11.288557] init: command 'chown' r=-2
  647. <6>[ 11.288582] init: command 'chown' r=-2
  648. <6>[ 11.288605] init: command 'chown' r=-2
  649. <6>[ 11.288631] init: command 'chown' r=-2
  650. <6>[ 11.288656] init: command 'chown' r=-2
  651. <6>[ 11.288695] init: command 'chown' r=-2
  652. <6>[ 11.288743] init: command 'chown' r=0
  653. <6>[ 11.288779] init: command 'chown' r=0
  654. <6>[ 11.288811] init: command 'chown' r=0
  655. <6>[ 11.288844] init: command 'chown' r=0
  656. <6>[ 11.288875] init: command 'chown' r=0
  657. <6>[ 11.288922] init: command 'chown' r=0
  658. <6>[ 11.288975] init: command 'chown' r=0
  659. <6>[ 11.289038] init: command 'setprop' r=0
  660. <6>[ 11.289083] init: command 'setprop' r=0
  661. <6>[ 11.289124] init: command 'setprop' r=0
  662. <6>[ 11.289164] init: command 'setprop' r=0
  663. <6>[ 11.289206] init: command 'setprop' r=0
  664. <6>[ 11.289246] init: command 'setprop' r=0
  665. <6>[ 11.289286] init: command 'setprop' r=0
  666. <6>[ 11.289312] init: command 'setprop' r=0
  667. <6>[ 11.289338] init: command 'setprop' r=0
  668. <3>[ 11.289371] init: service 'console' requires console
  669. <5>[ 11.289465] init: starting 'servicemanager'
  670. <5>[ 11.289958] init: starting 'vold'
  671. <6>[ 11.290416] init: command 'class_start' r=0
  672. <5>[ 11.290546] init: starting 'netd'
  673. <5>[ 11.290890] init: starting 'debuggerd'
  674. <5>[ 11.291217] init: starting 'surfaceflinger'
  675. <5>[ 11.291553] init: starting 'zygote'
  676. <5>[ 11.291883] init: starting 'drm'
  677. <5>[ 11.292239] init: starting 'media'
  678. <5>[ 11.292563] init: starting 'dbus'
  679. <5>[ 11.292894] init: starting 'installd'
  680. <3>[ 11.293221] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  681. <5>[ 11.293273] init: starting 'keystore'
  682. <5>[ 11.293635] init: starting 'u3gmonitor'
  683. <5>[ 11.293972] init: starting 'ril-daemon'
  684. <6>[ 11.294282] init: command 'class_start' r=0
  685. <6>[ 11.294367] init: processing action 0x1ef5d50 (boot)
  686. <6>[ 11.297031] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'
  687. <6>[ 11.297205] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
  688. <6>[ 11.298403] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
  689. <6>[ 11.304613] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
  690. <6>[ 11.305172] init: Created socket '/dev/socket/dbus' with mode '660', user '1002', group '1002'
  691. <6>[ 11.307968] init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'
  692. <6>[ 11.308572] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
  693. <6>[ 11.309901] init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
  694. <6>[ 11.314456] init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
  695. <4>[ 11.344998] [GSL1680] Enter gsl_ts_init
  696. <4>[ 11.345020] ctp_fetch_sysconfig_para.
  697. <4>[ 11.345047] ctp_fetch_sysconfig_para: after: ctp_twi_addr is 0x40, dirty_addr_buf: 0x40. dirty_addr_buf[1]: 0xfffe
  698. <4>[ 11.345060] ctp_fetch_sysconfig_para: ctp_twi_id is 1.
  699. <6>[ 11.345073] ctp_fetch_sysconfig_para: screen_max_x = 800.
  700. <6>[ 11.345083] ctp_fetch_sysconfig_para: screen_max_y = 480.
  701. <6>[ 11.345092] ctp_fetch_sysconfig_para: revert_x_flag = 0.
  702. <6>[ 11.345177] ctp_fetch_sysconfig_para: revert_y_flag = 1.
  703. <6>[ 11.345189] ctp_fetch_sysconfig_para: exchange_x_y_flag = 1.
  704. <4>[ 11.345198] gsl_ts_init: after fetch_sysconfig_para: normal_i2c: 0x40. normal_i2c[1]: 0xfffe
  705. <6>[ 11.345383] ctp_detect: Detected chip gsl1680 at adapter 1, address 0x40
  706. <4>[ 11.345526] [GSL1680] Enter gsl_ts_probe
  707. <6>[ 11.357685] input: gsl1680 as /devices/platform/sun5i-i2c.1/i2c-1/1-0040/input/input2
  708. <6>[ 11.358569] ctp_set_irq_mode: config gpio to int mode.
  709. <6>[ 11.358607] ctp_set_irq_mode, 371: gpio_int_info, port = 7, port_num = 11.
  710. <6>[ 11.358615] INTERRUPT CONFIG
  711. <6>[ 11.359097] I read reg 0xf0 is 0
  712. <6>[ 11.370517] I write reg 0xf0 0x12
  713. <6>[ 11.390714] I read reg 0xf0 is 0x12
  714. <4>[ 11.470086] =============gsl_load_fw start==============
  715. <4>[ 12.393011] =============gsl_load_fw end==============
  716. <4>[ 12.393036] =============gsl_load_cfg start==============
  717. <4>[ 12.442402] =============gsl_load_cfg end==============
  718. <4>[ 12.840135] [GSL1680] End gsl_ts_probe
  719. <6>[ 12.840400] init: command 'insmod' r=0
  720. <6>[ 12.840559] init: waitpid returned pid 84, status = 00000000
  721. <5>[ 12.840580] init: process 'surfaceflinger', pid 84 exited
  722. <5>[ 12.840599] init: process 'surfaceflinger' killing any children in process group
  723. <5>[ 12.840636] init: service 'zygote' is being killed
  724. <5>[ 12.840750] init: starting 'zygote'
  725. <6>[ 12.844783] init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
  726. <4>[ 12.884034] UMP<2>: Inserting UMP device driver. Compiled: Oct 15 2012, time: 20:14:38
  727. <4>[ 12.885793] UMP<2>: Using OS memory backend, allocation limit: 134217728
  728. <4>[ 12.885817] UMP: UMP device driver loaded
  729. <6>[ 12.886058] init: command 'insmod' r=0
  730. <6>[ 12.886826] init: waitpid returned pid 85, status = 00000009
  731. <3>[ 12.886851] init: untracked pid 85 exited
  732. <4>[ 13.039769] Mali: Mali device driver loaded
  733. <6>[ 13.040642] init: command 'insmod' r=0
  734. <4>[ 13.055764] [cedar dev]: install start!!!
  735. <4>[ 13.059027] [cedar dev]: install end!!!
  736. <6>[ 13.059993] init: command 'insmod' r=0
  737. <6>[ 13.079662] init: command 'insmod' r=0
  738. <6>[ 13.093902] init: command 'insmod' r=0
  739. <6>[ 13.116804] init: command 'insmod' r=0
  740. <6>[ 13.159039] [CSI]Welcome to CSI driver
  741. <6>[ 13.159061] [CSI]csi_init
  742. <6>[ 13.160876] [CSI]registered sub device,input_num = 0
  743. <6>[ 13.160923] [CSI]power on and power off camera!
  744. <6>[ 13.353807] [CSI]V4L2 device registered as video0
  745. <6>[ 13.354056] init: command 'insmod' r=0
  746. <6>[ 13.390515] usbcore: registered new interface driver asix
  747. <6>[ 13.390723] init: command 'insmod' r=0
  748. <6>[ 13.414276] usbcore: registered new interface driver qf9700
  749. <6>[ 13.414488] init: command 'insmod' r=0
  750. <6>[ 13.440472] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  751. <6>[ 13.440636] init: command 'insmod' r=0
  752. <4>[ 14.625772] sw_usb_enable_hcd: usbc_num = 1
  753. <4>[ 14.625798] [sw-ehci1]: sw_usb_enable_ehci
  754. <4>[ 14.625813] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a957c
  755. <4>[ 14.625834] [sw-ehci1]: open clock
  756. <4>[ 14.648173] usb_passby en=1,passly=0
  757. <4>[ 14.648187] hci_port_configure en=1,config_cnt=0
  758. <4>[ 14.648199] [sw-ehci1]: Set USB Power ON
  759. <6>[ 14.649076] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  760. <6>[ 14.649125] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  761. <6>[ 14.649241] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
  762. <6>[ 14.660057] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  763. <4>[ 14.660073] ehci_irq: port change detect
  764. <6>[ 14.662136] hub 2-0:1.0: USB hub found
  765. <6>[ 14.662173] hub 2-0:1.0: 1 port detected
  766. <4>[ 14.662712] [sw-ohci1]: sw_usb_enable_ohci
  767. <4>[ 14.662728] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a9694
  768. <4>[ 14.662742] [sw-ohci1]: open clock
  769. <4>[ 14.685312] hci_port_configure en=1,config_cnt=1
  770. <4>[ 14.685326] usb_passby en=1,passly=1
  771. <6>[ 14.685339] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  772. <6>[ 14.685411] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  773. <6>[ 14.685468] sw-ohci sw-ohci.1: irq 40, io mem 0xf1c14400
  774. <6>[ 14.748285] hub 3-0:1.0: USB hub found
  775. <6>[ 14.748337] hub 3-0:1.0: 1 port detected
  776. <4>[ 14.748876] rtw driver version=v4.1.0_3945.20120502
  777. <4>[ 14.748888] Build at: Sep 28 2012 17:14:13
  778. <4>[ 14.748896] ##########rtw_suspend_lock_init ###########
  779. <6>[ 14.749223] usbcore: registered new interface driver rtl8188eu
  780. <6>[ 14.753517] init: command 'insmod' r=0
  781. <4>[ 14.768733] mc32x0: init
  782. <4>[ 14.768770] ========gsensor_fetch_sysconfig_para===================
  783. <4>[ 14.768804] gsensor_fetch_sysconfig_para: after: gsensor_twi_addr is 0x4c, dirty_addr_buf: 0x4c. dirty_addr_buf[1]: 0xfffe
  784. <4>[ 14.768819] gsensor_fetch_sysconfig_para: twi_id is 1.
  785. <4>[ 14.768832] err: gpio count < =0 ,gpio_count is: 0
  786. <4>[ 14.768841] mc32x0_init: after fetch_sysconfig_para: normal_i2c: 0x4c. normal_i2c[1]: 0xfffe
  787. <6>[ 14.769294] gsensor_detect: Detected chip mc32x0 at adapter 1, address 0x4c
  788. <4>[ 14.830859] offser gain = 450 474 362 512 -224 240======================
  789. <4>[ 14.830871]
  790. <4>[ 14.830873]
  791. <6>[ 14.833993] input: mc32x0 as /devices/virtual/input/input3
  792. <4>[ 14.834435] mc32x0 probe ok
  793. <6>[ 14.834637] init: command 'insmod' r=0
  794. <4>[ 14.853596] dmard06: init
  795. <4>[ 14.853619] ========gsensor_fetch_sysconfig_para===================
  796. <4>[ 14.853651] gsensor_fetch_sysconfig_para: after: gsensor_twi_addr is 0x1c, dirty_addr_buf: 0x1c. dirty_addr_buf[1]: 0xfffe
  797. <4>[ 14.853666] gsensor_fetch_sysconfig_para: twi_id is 1.
  798. <4>[ 14.853680] err: gpio count < =0 ,gpio_count is: 0
  799. <4>[ 14.853689] dmard06_init: after fetch_sysconfig_para: normal_i2c: 0x1c. normal_i2c[1]: 0xfffe
  800. <6>[ 14.854133] gsensor_detect: Detected chip dmard06 at adapter 1, address 0x1c
  801. <4>[ 14.854796] [i2c1] incomplete xfer (0x20)
  802. <4>[ 14.855066] [i2c1] incomplete xfer (0x48)
  803. <6>[ 14.855075] i2c Read SW_RESET = 0
  804. <4>[ 14.855261] [i2c1] incomplete xfer (0x20)
  805. <4>[ 14.855445] [i2c1] incomplete xfer (0x48)
  806. <6>[ 14.855453] i2c Read WHO_AM_I = 0
  807. <4>[ 14.855459] dmard06 gsensor I2C err = 0!
  808. <4>[ 14.855526] dmard06 probe failed
  809. <4>[ 14.855548] dmard06: probe of 1-001c failed with error -1
  810. <6>[ 14.855722] init: command 'insmod' r=0
  811. <6>[ 14.855793] init: processing action 0x1ef6268 (queue_propety_triggers)
  812. <6>[ 14.855872] init: command 'queue_propety_triggers' r=0
  813. <6>[ 14.855891] init: processing action 0x1ef14b0 (nonencrypted)
  814. <6>[ 14.855912] init: command 'class_start' r=0
  815. <6>[ 14.855952] init: processing action 0x1ef1bd8 (property:persist.sys.usb.config=*)
  816. <6>[ 14.856019] init: command 'setprop' r=0
  817. <6>[ 14.856040] init: processing action 0x1ef1da8 (property:ro.debuggable=1)
  818. <3>[ 14.856058] init: service 'console' requires console
  819. <6>[ 14.856069] init: command 'start' r=0
  820. <6>[ 14.856084] init: processing action 0x1ef4ef0 (property:sys.usb.config=mass_storage,adb)
  821. <3>[ 14.856283] android_usb: already disabled
  822. <6>[ 14.856314] init: command 'write' r=0
  823. <6>[ 14.856430] init: command 'write' r=0
  824. <6>[ 14.856506] init: command 'write' r=0
  825. <6>[ 14.856586] init: command 'write' r=0
  826. <4>[ 14.856654] ep_matches, wrn: endpoint already claimed, ep(0xc08e2468, 0xdfb3dc00, ep1-bulk)
  827. <6>[ 14.856668] adb_bind_config
  828. <4>[ 14.856678] ep_matches, wrn: endpoint already claimed, ep(0xc08e2468, 0xdfb3dc00, ep1-bulk)
  829. <4>[ 14.856688] ep_matches, wrn: endpoint already claimed, ep(0xc08e24a8, 0xdfb3dc00, ep2-bulk)
  830. <4>[ 14.856699] ep_matches, wrn: endpoint already claimed, ep(0xc08e2468, 0xdfb3dc00, ep1-bulk)
  831. <4>[ 14.856709] ep_matches, wrn: endpoint already claimed, ep(0xc08e24a8, 0xdfb3dc00, ep2-bulk)
  832. <4>[ 14.856720] ep_matches, wrn: endpoint already claimed, ep(0xc08e24e8, 0xdfbdfa00, ep3-bulk)
  833. <4>[ 14.856731] [sw_udc]: alloc request: ep(0xc08e2528, ep4-bulk, 512), req(0xde98c680)
  834. <4>[ 14.856744] [sw_udc]: alloc request: ep(0xc08e24e8, ep3-bulk, 512), req(0xde98c6c0)
  835. <4>[ 14.856757] [sw_udc]: alloc request: ep(0xc08e24e8, ep3-bulk, 512), req(0xde98c700)
  836. <4>[ 14.856769] [sw_udc]: alloc request: ep(0xc08e24e8, ep3-bulk, 512), req(0xde98c740)
  837. <4>[ 14.856781] [sw_udc]: alloc request: ep(0xc08e24e8, ep3-bulk, 512), req(0xde98c780)
  838. <4>[ 14.856796] [sw_udc]: sw_udc_pullup, is_on = 1
  839. <4>[ 14.856806] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED
  840. <4>[ 14.856817] [sw_udc]: usbd_start_work
  841. <6>[ 14.856840] init: command 'write' r=0
  842. <5>[ 14.856894] init: starting 'adbd'
  843. <6>[ 14.857278] init: command 'start' r=0
  844. <6>[ 14.857362] init: command 'setprop' r=0
  845. <6>[ 14.859841] adb_open
  846. <4>[ 14.912276] [sw_udc]: IRQ: suspend
  847. <4>[ 14.912303] [sw_udc]: ERR: usb speed is unkown
  848. <6>[ 14.980137] usb 2-1: new high speed USB device number 2 using sw-ehci
  849. <4>[ 15.021753] [sw_udc]: IRQ: reset
  850. <4>[ 15.021779] [sw_udc]: irq: reset happen, throw away all urb
  851. <4>[ 15.062228] [sw_udc]:
  852. <4>[ 15.062243] +++++++++++++++++++++++++++++++++++++
  853. <4>[ 15.062249] [sw_udc]: usb enter high speed.
  854. <4>[ 15.062256] [sw_udc]:
  855. <4>[ 15.062261] +++++++++++++++++++++++++++++++++++++
  856. <6>[ 15.062422] android_work: sent uevent USB_STATE=CONNECTED
  857. <4>[ 15.067103] [sw_udc]: IRQ: reset
  858. <4>[ 15.067128] [sw_udc]: irq: reset happen, throw away all urb
  859. <4>[ 15.102203] [sw_udc]: Set address 4
  860. <4>[ 15.834518] mcube_read_cali_file 675
  861. <6>[ 15.834536] initKernelEnv
  862. <6>[ 15.853173] android_usb gadget: high speed config #1: android
  863. <4>[ 15.853221] [sw_udc]: ep enable: ep3(0xc08e24e8, ep3-bulk, 128, 512)
  864. <4>[ 15.853248] [sw_udc]: ep enable: ep4(0xc08e2528, ep4-bulk, 0, 512)
  865. <4>[ 15.853308] [sw_udc]: ep enable: ep1(0xc08e2468, ep1-bulk, 128, 512)
  866. <4>[ 15.853327] [sw_udc]: ep enable: ep2(0xc08e24a8, ep2-bulk, 0, 512)
  867. <4>[ 15.853343] [sw_udc]: alloc request: ep(0xc08e2468, ep1-bulk, 512), req(0xde844580)
  868. <4>[ 15.853355] [sw_udc]: alloc request: ep(0xc08e24a8, ep2-bulk, 512), req(0xde844600)
  869. <4>[ 15.853368] [sw_udc]: alloc request: ep(0xc08e2468, ep1-bulk, 512), req(0xde844640)
  870. <4>[ 15.853379] [sw_udc]: alloc request: ep(0xc08e24a8, ep2-bulk, 512), req(0xde844680)
  871. <6>[ 15.853509] android_work: sent uevent USB_STATE=CONFIGURED
  872. <4>[ 15.854524] mcube_read_cali_file 675
  873. <6>[ 15.854536] initKernelEnv
  874. <4>[ 15.874593] mcube_read_cali_file 675
  875. <6>[ 15.874610] initKernelEnv
  876. <4>[ 15.894656] mcube_read_cali_file 675
  877. <6>[ 15.894674] initKernelEnv
  878. <4>[ 15.914701] mcube_read_cali_file 675
  879. <6>[ 15.914719] initKernelEnv
  880. <4>[ 15.934703] mcube_read_cali_file 675
  881. <6>[ 15.934717] initKernelEnv
  882. <4>[ 15.954718] mcube_read_cali_file 675
  883. <6>[ 15.954728] initKernelEnv
  884. <4>[ 15.974744] mcube_read_cali_file 675
  885. <6>[ 15.974757] initKernelEnv
  886. <4>[ 15.994802] mcube_read_cali_file 675
  887. <6>[ 15.994822] initKernelEnv
  888. <4>[ 16.014835] mcube_read_cali_file 675
  889. <6>[ 16.014852] initKernelEnv
  890. <4>[ 16.035320] mcube_read_cali_file 675
  891. <6>[ 16.035336] initKernelEnv
  892. <4>[ 16.054854] mcube_read_cali_file 675
  893. <6>[ 16.054864] initKernelEnv
  894. <4>[ 16.074858] mcube_read_cali_file 675
  895. <6>[ 16.074865] initKernelEnv
  896. <4>[ 16.094868] mcube_read_cali_file 675
  897. <6>[ 16.094875] initKernelEnv
  898. <4>[ 16.114886] mcube_read_cali_file 675
  899. <6>[ 16.114893] initKernelEnv
  900. <4>[ 16.134891] mcube_read_cali_file 675
  901. <6>[ 16.134898] initKernelEnv
  902. <4>[ 16.154910] mcube_read_cali_file 675
  903. <6>[ 16.154917] initKernelEnv
  904. <4>[ 16.174923] mcube_read_cali_file 675
  905. <6>[ 16.174933] initKernelEnv
  906. <4>[ 16.194937] mcube_read_cali_file 675
  907. <6>[ 16.194944] initKernelEnv
  908. <4>[ 16.214943] mcube_read_cali_file 675
  909. <6>[ 16.214950] initKernelEnv
  910. <4>[ 16.234953] mcube_read_cali_file 675
  911. <6>[ 16.234960] initKernelEnv
  912. <4>[ 16.254967] mcube_read_cali_file 675
  913. <6>[ 16.254974] initKernelEnv
  914. <4>[ 16.274985] mcube_read_cali_file 675
  915. <6>[ 16.274992] initKernelEnv
  916. <4>[ 16.294990] mcube_read_cali_file 675
  917. <6>[ 16.294997] initKernelEnv
  918. <4>[ 16.315001] mcube_read_cali_file 675
  919. <6>[ 16.315007] initKernelEnv
  920. <4>[ 16.335019] mcube_read_cali_file 675
  921. <6>[ 16.335026] initKernelEnv
  922. <4>[ 16.355025] mcube_read_cali_file 675
  923. <6>[ 16.355032] initKernelEnv
  924. <4>[ 16.375043] mcube_read_cali_file 675
  925. <6>[ 16.375053] initKernelEnv
  926. <4>[ 16.395057] mcube_read_cali_file 675
  927. <6>[ 16.395064] initKernelEnv
  928. <4>[ 16.415071] mcube_read_cali_file 675
  929. <6>[ 16.415078] initKernelEnv
  930. <5>[ 16.859536] init: starting 'surfaceflinger'
  931. <4>[ 17.035233] UMP<2>: New session opened
  932. <5>[ 17.180591] init: starting 'bootanim'
  933. <6>[ 17.201629] init: waitpid returned pid 138, status = 00000000
  934. <3>[ 17.201659] init: untracked pid 138 exited
  935. <4>[ 17.458434] UMP<2>: New session opened
  936. <6>[ 21.883464] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  937. <6>[ 34.966742] request_suspend_state: wakeup (3->0) at 34966711186 (2013-08-09 15:38:44.535664205 UTC)
  938. <6>[ 35.449239] acc_open
  939. <6>[ 35.449285] acc_release
  940. <4>[ 36.249562] UMP<2>: New session opened
  941. <4>[ 40.303337] [AXP]Correct2:fix 100,charger->rest_vol = 99 -> 100%
  942. <4>[ 40.303841] battery vol change: 99->100
  943. <4>[ 41.659066] UMP<2>: New session opened
  944. <4>[ 42.502935] UMP<2>: New session opened
  945. <6>[ 42.629365] init: processing action 0x1ef3400 (property:sys.boot_completed=1)
  946. <5>[ 42.629533] init: starting 'preinstall'
  947. <6>[ 42.632476] init: command 'start' r=0
  948. <6>[ 42.902898] EXT4-fs (nandi): mounted filesystem with ordered data mode. Opts: (null)
  949. <5>[ 45.517903] init: service 'bootanim' is being killed
  950. <4>[ 45.524259] UMP<2>: Session closed
  951. <6>[ 45.525702] init: waitpid returned pid 147, status = 00000009
  952. <5>[ 45.526004] init: process 'bootanim', pid 147 exited
  953. <4>[ 64.795107] [sw_udc]: IRQ: suspend
  954. <4>[ 64.807926] [AXP]battery state change
  955. <4>[ 64.811851] charger->usb_valid = 0
  956. <4>[ 64.811873] set usb vol-lim to 4000 mV, cur-lim to 0 mA
  957. <4>[ 64.831799] [AXP]axp_battery_event, 743, event = 0x4
  958. <4>[ 65.730084]
  959. <4>[ 65.730100]
  960. <4>[ 65.730103] rmmod_device_driver
  961. <4>[ 65.730106]
  962. <4>[ 65.730117] [sw_udc]: sw_usb_device_disable start
  963. <4>[ 65.730149] [sw_udc]: ep disable: ep3(0xc08e24e8, ep3-bulk, 128, 200)
  964. <4>[ 65.730171] [sw_udc]: ep disable: ep4(0xc08e2528, ep4-bulk, 0, 200)
  965. <4>[ 65.730223] [sw_udc]: close_usb_clock
  966. <4>[ 65.730270] [sw_udc]: sw_usb_device_disable end
  967. <4>[ 65.730301] [sw_udc]: dequeue: ep(0xc08e2490, 2), _req(0xde844608, 512, 0)
  968. <4>[ 65.730323] [sw_udc]: free request: ep(0xc08e2468, ep1-bulk, 512), req(0xde844580)
  969. <4>[ 65.730336] [sw_udc]: free request: ep(0xc08e24a8, ep2-bulk, 512), req(0xde844600)
  970. <4>[ 65.730348] [sw_udc]: free request: ep(0xc08e2468, ep1-bulk, 512), req(0xde844640)
  971. <4>[ 65.730359] [sw_udc]: free request: ep(0xc08e24a8, ep2-bulk, 512), req(0xde844680)
  972. <4>[ 65.730371] [sw_udc]: ep disable: ep1(0xc08e2468, ep1-bulk, 128, 200)
  973. <4>[ 65.730384] WRN:L2201(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
  974. <4>[ 65.730394] [sw_udc]: ep disable: ep2(0xc08e24a8, ep2-bulk, 0, 200)
  975. <4>[ 65.730405] WRN:L2201(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
  976. <6>[ 65.730535] adb_release
  977. <6>[ 65.730842] android_work: sent uevent USB_STATE=DISCONNECTED
  978. <6>[ 65.731129] adb_open
  979. <4>[ 67.110980] [AXP]battery state change
  980. <4>[ 67.112666] charger->usb_valid = 1
  981. <4>[ 67.117654] [AXP]axp_battery_event, 743, event = 0x8
  982. <4>[ 68.716263] [AXP]battery state change
  983. <4>[ 68.718119] charger->usb_valid = 1
  984. <4>[ 68.720579] [AXP]axp_battery_event, 743, event = 0x800
  985. <4>[ 69.770060]
  986. <4>[ 69.770077]
  987. <4>[ 69.770080] insmod_device_driver
  988. <4>[ 69.770084]
  989. <4>[ 69.770096] [sw_udc]: sw_usb_device_enable start
  990. <4>[ 69.770105] [sw_udc]: usb_vbase = 0xf1c13000
  991. <4>[ 69.770117] [sw_udc]: sram_vbase = 0xf1c00000
  992. <4>[ 69.770143] [sw_udc]: open_usb_clock
  993. <4>[ 69.801842] [sw_udc]: usbd_stop_work
  994. <4>[ 69.801888] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED
  995. <4>[ 69.801900] [sw_udc]: usbd_start_work
  996. <4>[ 69.801907] [sw_udc]: usbd_start_work
  997. <4>[ 69.801914] [sw_udc]: sw_usb_device_enable end
  998. <4>[ 69.857353] [sw_udc]: IRQ: suspend
  999. <4>[ 69.857371] [sw_udc]: ERR: usb speed is unkown
  1000. <4>[ 69.967979] [sw_udc]: IRQ: reset
  1001. <4>[ 69.967996] [sw_udc]: irq: reset happen, throw away all urb
  1002. <4>[ 70.008334] [sw_udc]:
  1003. <4>[ 70.008351] +++++++++++++++++++++++++++++++++++++
  1004. <4>[ 70.008359] [sw_udc]: usb enter high speed.
  1005. <4>[ 70.008367] [sw_udc]:
  1006. <4>[ 70.008371] +++++++++++++++++++++++++++++++++++++
  1007. <6>[ 70.008524] android_work: sent uevent USB_STATE=CONNECTED
  1008. <4>[ 70.013293] [sw_udc]: IRQ: reset
  1009. <4>[ 70.013324] [sw_udc]: irq: reset happen, throw away all urb
  1010. <4>[ 70.048270] [sw_udc]: Set address 4
  1011. <6>[ 70.096778] android_usb gadget: high speed config #1: android
  1012. <4>[ 70.096817] [sw_udc]: ep enable: ep3(0xc08e24e8, ep3-bulk, 128, 512)
  1013. <4>[ 70.096840] [sw_udc]: ep enable: ep4(0xc08e2528, ep4-bulk, 0, 512)
  1014. <4>[ 70.096893] [sw_udc]: ep enable: ep1(0xc08e2468, ep1-bulk, 128, 512)
  1015. <4>[ 70.096909] [sw_udc]: ep enable: ep2(0xc08e24a8, ep2-bulk, 0, 512)
  1016. <4>[ 70.096923] [sw_udc]: alloc request: ep(0xc08e2468, ep1-bulk, 512), req(0xdea42f40)
  1017. <4>[ 70.096936] [sw_udc]: alloc request: ep(0xc08e24a8, ep2-bulk, 512), req(0xdea42900)
  1018. <4>[ 70.096948] [sw_udc]: alloc request: ep(0xc08e2468, ep1-bulk, 512), req(0xdea42cc0)
  1019. <4>[ 70.096960] [sw_udc]: alloc request: ep(0xc08e24a8, ep2-bulk, 512), req(0xdea42500)
  1020. <6>[ 70.097096] android_work: sent uevent USB_STATE=CONFIGURED
  1021. <4>[ 70.363215] [AXP]Correct5:fix 99:charger->rest_vol = 100
  1022. <4>[ 70.364479] battery vol change: 100->99
  1023. <4>[ 71.120059] set usbcur 0 mA
  1024. <4>[ 71.120329] set usbvol 4000 mV
  1025. <4>[ 74.942668] [AXP]power key down
  1026. <4>[ 74.944969] [AXP]axp_battery_event, 743, event = 0x20
  1027. <4>[ 75.159353] [AXP]power key up
  1028. <4>[ 75.161170] [AXP]axp_battery_event, 743, event = 0x40
  1029. <4>[ 75.387221] [pm]valid
  1030. <6>[ 75.387275] request_suspend_state: sleep (0->3) at 75387263171 (2013-08-09 15:39:24.956220023 UTC)
  1031. <4>[ 75.390115] [GSL1680] Enter gsl_ts_early_suspend
  1032. <4>[ 75.537228] [AXP]======early suspend=======
  1033. <4>[ 75.539464] [AXP-APP]pmu_earlysuspend_chgcur = 600000
  1034. <4>[ 75.539475] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol = 3500000
  1035. <4>[ 75.539485] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol val = 0x71
  1036. <6>[ 75.541176] ==display early suspend enter
  1037. <4>[ 76.621389] [AXP]power key down
  1038. <6>[ 76.622662] request_suspend_state: wakeup (3->0) at 76622639431 (2013-08-09 15:39:26.191593533 UTC)
  1039. <4>[ 76.627493] [AXP]axp_battery_event, 743, event = 0x20
  1040. <4>[ 76.869734] [AXP]power key up
  1041. <4>[ 76.870578] [AXP]axp_battery_event, 743, event = 0x40
  1042. <4>[ 79.834630] [AXP]power key down
  1043. <4>[ 79.836480] [AXP]axp_battery_event, 743, event = 0x20
  1044. <4>[ 80.263844] [AXP]power key up
  1045. <4>[ 80.265210] [AXP]axp_battery_event, 743, event = 0x40
  1046. <4>[ 80.383490] battery vol change: 99->98
  1047. <4>[ 80.490132] [pm]valid
  1048. <6>[ 80.490178] request_suspend_state: sleep (0->3) at 80490166685 (2013-08-09 15:39:30.059120412 UTC)
  1049. <4>[ 82.506197] [sw_udc]: IRQ: suspend
  1050. <4>[ 82.525848] [AXP]battery state change
  1051. <4>[ 82.527585] charger->usb_valid = 0
  1052. <4>[ 82.527601] set usb vol-lim to 4000 mV, cur-lim to 0 mA
  1053. <4>[ 82.534205] [AXP]axp_battery_event, 743, event = 0x4
  1054. <4>[ 82.930050]
  1055. <4>[ 82.930066]
  1056. <4>[ 82.930069] rmmod_device_driver
  1057. <4>[ 82.930073]
  1058. <4>[ 82.930086] [sw_udc]: sw_usb_device_disable start
  1059. <4>[ 82.930115] [sw_udc]: ep disable: ep3(0xc08e24e8, ep3-bulk, 128, 200)
  1060. <4>[ 82.930137] [sw_udc]: ep disable: ep4(0xc08e2528, ep4-bulk, 0, 200)
  1061. <4>[ 82.930196] [sw_udc]: close_usb_clock
  1062. <4>[ 82.930243] [sw_udc]: sw_usb_device_disable end
  1063. <4>[ 82.930271] [sw_udc]: dequeue: ep(0xc08e2490, 2), _req(0xdea42908, 512, 0)
  1064. <4>[ 82.930295] [sw_udc]: free request: ep(0xc08e2468, ep1-bulk, 512), req(0xdea42f40)
  1065. <4>[ 82.930308] [sw_udc]: free request: ep(0xc08e24a8, ep2-bulk, 512), req(0xdea42900)
  1066. <4>[ 82.930319] [sw_udc]: free request: ep(0xc08e2468, ep1-bulk, 512), req(0xdea42cc0)
  1067. <4>[ 82.930331] [sw_udc]: free request: ep(0xc08e24a8, ep2-bulk, 512), req(0xdea42500)
  1068. <4>[ 82.930343] [sw_udc]: ep disable: ep1(0xc08e2468, ep1-bulk, 128, 200)
  1069. <4>[ 82.930355] WRN:L2201(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
  1070. <4>[ 82.930365] [sw_udc]: ep disable: ep2(0xc08e24a8, ep2-bulk, 0, 200)
  1071. <4>[ 82.930376] WRN:L2201(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
  1072. <6>[ 82.930507] adb_release
  1073. <6>[ 82.930803] android_work: sent uevent USB_STATE=DISCONNECTED
  1074. <6>[ 82.931083] adb_open
  1075. <4>[ 85.876857] [AXP]power key down
  1076. <6>[ 85.878179] request_suspend_state: wakeup (3->0) at 85878154741 (2013-08-09 15:39:35.447112052 UTC)
  1077. <6>[ 85.879049] ==display late resume enter
  1078. <4>[ 85.881575] [AXP]axp_battery_event, 743, event = 0x20
  1079. <4>[ 86.216062] [AXP]power key up
  1080. <4>[ 86.216797] [AXP]axp_battery_event, 743, event = 0x40
  1081. <4>[ 86.440074] [DISP] *****************************************************************
  1082. <4>[ 86.440106] [DISP] ***
  1083. <4>[ 86.440113] [DISP] *** LCD Panel Parameter Check
  1084. <4>[ 86.440120] [DISP] ***
  1085. <4>[ 86.440126] [DISP] *** by dulianping
  1086. <4>[ 86.440133] [DISP] ***
  1087. <4>[ 86.440138] [DISP] *****************************************************************
  1088. <4>[ 86.440148] [DISP] ***
  1089. <4>[ 86.440153] [DISP] *** Interface:
  1090. <4>[ 86.440160] [DISP] *** Parallel HV Panel
  1091. <4>[ 86.440168] [DISP] *** Lcd Frm to RGB666
  1092. <4>[ 86.440174] [DISP] ***
  1093. <4>[ 86.440180] [DISP] *** Timing:
  1094. <4>[ 86.440186] [DISP] *** lcd_x: 800
  1095. <4>[ 86.440194] [DISP] *** lcd_y: 480
  1096. <4>[ 86.440202] [DISP] *** lcd_ht: 928
  1097. <4>[ 86.440208] [DISP] *** lcd_hbp: 88
  1098. <4>[ 86.440216] [DISP] *** lcd_vt: 1050
  1099. <4>[ 86.440223] [DISP] *** lcd_vbp: 32
  1100. <4>[ 86.440230] [DISP] *** lcd_hspw: 30
  1101. <4>[ 86.440238] [DISP] *** lcd_vspw: 13
  1102. <4>[ 86.440245] [DISP] *** lcd_frame_frq: 80Hz
  1103. <4>[ 86.440252] [DISP] ***
  1104. <4>[ 86.440258] [DISP] *** WRN03: Recommend "lcd_dclk_frq = 29"
  1105. <4>[ 86.440267] [DISP] ***
  1106. <4>[ 86.440273] [DISP] *** LCD Panel Parameter Check End
  1107. <4>[ 86.440281] [DISP] *****************************************************************
  1108. <6>[ 86.440304] display late resume done: backlight_late_resume
  1109. <4>[ 86.440323] [AXP]======late resume=======
  1110. <4>[ 86.441231] [AXP-APP]pmu_resume_chgcur = 300000
  1111. <4>[ 86.441244] [GSL1680] Enter gsl_ts_late_resume
  1112. <4>[ 86.761342] [i2c1] incomplete xfer (0x48)
  1113. <4>[ 97.735555] [AXP]battery state change
  1114. <4>[ 97.737184] charger->usb_valid = 1
  1115. <4>[ 97.741247] [AXP]axp_battery_event, 743, event = 0x8
  1116. <6>[ 99.079251] init: waitpid returned pid 472, status = 00000000
  1117. <5>[ 99.079280] init: process 'preinstall', pid 472 exited
  1118. <4>[ 99.339656] [AXP]battery state change
  1119. <4>[ 99.341492] charger->usb_valid = 1
  1120. <4>[ 99.344458] [AXP]axp_battery_event, 743, event = 0x800
  1121. <4>[ 100.100088]
  1122. <4>[ 100.100105]
  1123. <4>[ 100.100108] insmod_device_driver
  1124. <4>[ 100.100112]
  1125. <4>[ 100.100126] [sw_udc]: sw_usb_device_enable start
  1126. <4>[ 100.100135] [sw_udc]: usb_vbase = 0xf1c13000
  1127. <4>[ 100.100145] [sw_udc]: sram_vbase = 0xf1c00000
  1128. <4>[ 100.100172] [sw_udc]: open_usb_clock
  1129. <4>[ 100.122100] [sw_udc]: usbd_stop_work
  1130. <4>[ 100.122160] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED
  1131. <4>[ 100.122171] [sw_udc]: usbd_start_work
  1132. <4>[ 100.122182] [sw_udc]: usbd_start_work
  1133. <4>[ 100.122189] [sw_udc]: sw_usb_device_enable end
  1134. <4>[ 100.177639] [sw_udc]: IRQ: suspend
  1135. <4>[ 100.177666] [sw_udc]: ERR: usb speed is unkown
  1136. <4>[ 100.285283] [sw_udc]: IRQ: reset
  1137. <4>[ 100.285311] [sw_udc]: irq: reset happen, throw away all urb
  1138. <4>[ 100.321763] [sw_udc]:
  1139. <4>[ 100.321789] +++++++++++++++++++++++++++++++++++++
  1140. <4>[ 100.321796] [sw_udc]: usb enter high speed.
  1141. <4>[ 100.321803] [sw_udc]:
  1142. <4>[ 100.321808] +++++++++++++++++++++++++++++++++++++
  1143. <6>[ 100.321965] android_work: sent uevent USB_STATE=CONNECTED
  1144. <4>[ 100.326678] [sw_udc]: IRQ: reset
  1145. <4>[ 100.326705] [sw_udc]: irq: reset happen, throw away all urb
  1146. <4>[ 100.361705] [sw_udc]: Set address 4
  1147. <6>[ 100.392999] android_usb gadget: high speed config #1: android
  1148. <4>[ 100.393052] [sw_udc]: ep enable: ep3(0xc08e24e8, ep3-bulk, 128, 512)
  1149. <4>[ 100.393075] [sw_udc]: ep enable: ep4(0xc08e2528, ep4-bulk, 0, 512)
  1150. <4>[ 100.393139] [sw_udc]: ep enable: ep1(0xc08e2468, ep1-bulk, 128, 512)
  1151. <4>[ 100.393159] [sw_udc]: ep enable: ep2(0xc08e24a8, ep2-bulk, 0, 512)
  1152. <4>[ 100.393175] [sw_udc]: alloc request: ep(0xc08e2468, ep1-bulk, 512), req(0xd257d140)
  1153. <4>[ 100.393188] [sw_udc]: alloc request: ep(0xc08e24a8, ep2-bulk, 512), req(0xd257d1c0)
  1154. <4>[ 100.393200] [sw_udc]: alloc request: ep(0xc08e2468, ep1-bulk, 512), req(0xd257d240)
  1155. <4>[ 100.393211] [sw_udc]: alloc request: ep(0xc08e24a8, ep2-bulk, 512), req(0xd257d180)
  1156. <6>[ 100.393354] android_work: sent uevent USB_STATE=CONFIGURED
  1157. <4>[ 101.740270] set usbcur 0 mA
  1158. <4>[ 101.740541] set usbvol 4000 mV
  1159. <4>[ 130.503025] [AXP]===========================calculate rdc
  1160. <4>[ 130.504200] [AXP]CHARGING: charger->vbat = 4165, charger->ibat = 286
  1161. <4>[ 130.504210] [AXP]DISCHARGING:charger->disvbat = 4045,charger->disibat = 707
  1162. <4>[ 130.504758] [AXP]CALRDC:temp = 120
  1163. <4>[ 130.506872] [AXP]-----------in change_flag-----------
  1164. <4>[ 158.036699] [pm]valid
  1165. <6>[ 158.036743] request_suspend_state: sleep (0->3) at 158036730800 (2013-08-09 15:40:47.605688068 UTC)
  1166. <4>[ 158.064197] [GSL1680] Enter gsl_ts_early_suspend
  1167. <4>[ 158.166622] [AXP]======early suspend=======
  1168. <4>[ 158.167421] [AXP-APP]pmu_earlysuspend_chgcur = 600000
  1169. <4>[ 158.167430] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol = 3500000
  1170. <4>[ 158.167441] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol val = 0x71
  1171. <6>[ 158.168386] ==display early suspend enter
  1172. <4>[ 160.942112] [AXP]power key down
  1173. <6>[ 160.943997] request_suspend_state: wakeup (3->0) at 160943969261 (2013-08-09 15:40:50.512925946 UTC)
  1174. <6>[ 160.944833] ==display late resume enter
  1175. <4>[ 160.953605] [AXP]axp_battery_event, 743, event = 0x20
  1176. <4>[ 161.168744] [AXP]power key up
  1177. <4>[ 161.169462] [AXP]axp_battery_event, 743, event = 0x40
  1178. <4>[ 161.510066] [DISP] *****************************************************************
  1179. <4>[ 161.510097] [DISP] ***
  1180. <4>[ 161.510104] [DISP] *** LCD Panel Parameter Check
  1181. <4>[ 161.510112] [DISP] ***
  1182. <4>[ 161.510117] [DISP] *** by dulianping
  1183. <4>[ 161.510124] [DISP] ***
  1184. <4>[ 161.510130] [DISP] *****************************************************************
  1185. <4>[ 161.510139] [DISP] ***
  1186. <4>[ 161.510145] [DISP] *** Interface:
  1187. <4>[ 161.510152] [DISP] *** Parallel HV Panel
  1188. <4>[ 161.510162] [DISP] *** Lcd Frm to RGB666
  1189. <4>[ 161.510169] [DISP] ***
  1190. <4>[ 161.510175] [DISP] *** Timing:
  1191. <4>[ 161.510181] [DISP] *** lcd_x: 800
  1192. <4>[ 161.510188] [DISP] *** lcd_y: 480
  1193. <4>[ 161.510196] [DISP] *** lcd_ht: 928
  1194. <4>[ 161.510202] [DISP] *** lcd_hbp: 88
  1195. <4>[ 161.510210] [DISP] *** lcd_vt: 1050
  1196. <4>[ 161.510217] [DISP] *** lcd_vbp: 32
  1197. <4>[ 161.510224] [DISP] *** lcd_hspw: 30
  1198. <4>[ 161.510234] [DISP] *** lcd_vspw: 13
  1199. <4>[ 161.510241] [DISP] *** lcd_frame_frq: 80Hz
  1200. <4>[ 161.510248] [DISP] ***
  1201. <4>[ 161.510254] [DISP] *** WRN03: Recommend "lcd_dclk_frq = 29"
  1202. <4>[ 161.510263] [DISP] ***
  1203. <4>[ 161.510269] [DISP] *** LCD Panel Parameter Check End
  1204. <4>[ 161.510277] [DISP] *****************************************************************
  1205. <6>[ 161.510297] display late resume done: backlight_late_resume
  1206. <4>[ 161.510314] [AXP]======late resume=======
  1207. <4>[ 161.512633] [AXP-APP]pmu_resume_chgcur = 300000
  1208. <4>[ 161.512667] [GSL1680] Enter gsl_ts_late_resume
  1209. <4>[ 161.780856] [i2c1] incomplete xfer (0x48)
  1210. <4>[ 171.172377] [pm]valid
  1211. <6>[ 171.172424] request_suspend_state: sleep (0->3) at 171172413341 (2013-08-09 15:41:00.741370110 UTC)
  1212. <4>[ 171.200193] [GSL1680] Enter gsl_ts_early_suspend
  1213. <4>[ 171.305572] [AXP]======early suspend=======
  1214. <4>[ 171.308956] [AXP-APP]pmu_earlysuspend_chgcur = 600000
  1215. <4>[ 171.308972] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol = 3500000
  1216. <4>[ 171.308982] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol val = 0x71
  1217. <6>[ 171.310824] ==display early suspend enter
  1218. <4>[ 198.065089] [AXP]power key down
  1219. <6>[ 198.066158] request_suspend_state: wakeup (3->0) at 198066132791 (2013-08-09 15:41:27.635087101 UTC)
  1220. <6>[ 198.066999] ==display late resume enter
  1221. <4>[ 198.097499] [AXP]axp_battery_event, 743, event = 0x20
  1222. <4>[ 198.325368] [AXP]power key up
  1223. <4>[ 198.326088] [AXP]axp_battery_event, 743, event = 0x40
  1224. <4>[ 198.640112] [DISP] *****************************************************************
  1225. <4>[ 198.640144] [DISP] ***
  1226. <4>[ 198.640151] [DISP] *** LCD Panel Parameter Check
  1227. <4>[ 198.640158] [DISP] ***
  1228. <4>[ 198.640164] [DISP] *** by dulianping
  1229. <4>[ 198.640171] [DISP] ***
  1230. <4>[ 198.640177] [DISP] *****************************************************************
  1231. <4>[ 198.640186] [DISP] ***
  1232. <4>[ 198.640192] [DISP] *** Interface:
  1233. <4>[ 198.640199] [DISP] *** Parallel HV Panel
  1234. <4>[ 198.640206] [DISP] *** Lcd Frm to RGB666
  1235. <4>[ 198.640213] [DISP] ***
  1236. <4>[ 198.640219] [DISP] *** Timing:
  1237. <4>[ 198.640225] [DISP] *** lcd_x: 800
  1238. <4>[ 198.640233] [DISP] *** lcd_y: 480
  1239. <4>[ 198.640240] [DISP] *** lcd_ht: 928
  1240. <4>[ 198.640247] [DISP] *** lcd_hbp: 88
  1241. <4>[ 198.640254] [DISP] *** lcd_vt: 1050
  1242. <4>[ 198.640261] [DISP] *** lcd_vbp: 32
  1243. <4>[ 198.640268] [DISP] *** lcd_hspw: 30
  1244. <4>[ 198.640276] [DISP] *** lcd_vspw: 13
  1245. <4>[ 198.640285] [DISP] *** lcd_frame_frq: 80Hz
  1246. <4>[ 198.640292] [DISP] ***
  1247. <4>[ 198.640298] [DISP] *** WRN03: Recommend "lcd_dclk_frq = 29"
  1248. <4>[ 198.640307] [DISP] ***
  1249. <4>[ 198.640313] [DISP] *** LCD Panel Parameter Check End
  1250. <4>[ 198.640321] [DISP] *****************************************************************
  1251. <6>[ 198.640341] display late resume done: backlight_late_resume
  1252. <4>[ 198.640361] [AXP]======late resume=======
  1253. <4>[ 198.641316] [AXP-APP]pmu_resume_chgcur = 300000
  1254. <4>[ 198.641332] [GSL1680] Enter gsl_ts_late_resume
  1255. <4>[ 198.920949] [i2c1] incomplete xfer (0x48)
  1256. <4>[ 208.295810] [pm]valid
  1257. <6>[ 208.295857] request_suspend_state: sleep (0->3) at 208295845777 (2013-08-09 15:41:37.864802963 UTC)
  1258. <4>[ 208.320660] [GSL1680] Enter gsl_ts_early_suspend
  1259. <4>[ 208.470335] [AXP]======early suspend=======
  1260. <4>[ 208.471090] [AXP-APP]pmu_earlysuspend_chgcur = 600000
  1261. <4>[ 208.471100] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol = 3500000
  1262. <4>[ 208.471109] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol val = 0x71
  1263. <6>[ 208.472091] ==display early suspend enter
  1264. <4>[ 210.663559] battery vol change: 98->99
  1265. <4>[ 216.803604] [AXP]power key down
  1266. <4>[ 216.806414] [AXP]axp_battery_event, 743, event = 0x20
  1267. <6>[ 216.807090] request_suspend_state: wakeup (3->0) at 216807075246 (2013-08-09 15:41:46.376032015 UTC)
  1268. <6>[ 216.807133] ==display late resume enter
  1269. <4>[ 217.069925] [AXP]power key up
  1270. <4>[ 217.070687] [AXP]axp_battery_event, 743, event = 0x40
  1271. <4>[ 217.360132] [DISP] *****************************************************************
  1272. <4>[ 217.360161] [DISP] ***
  1273. <4>[ 217.360168] [DISP] *** LCD Panel Parameter Check
  1274. <4>[ 217.360175] [DISP] ***
  1275. <4>[ 217.360181] [DISP] *** by dulianping
  1276. <4>[ 217.360188] [DISP] ***
  1277. <4>[ 217.360194] [DISP] *****************************************************************
  1278. <4>[ 217.360203] [DISP] ***
  1279. <4>[ 217.360208] [DISP] *** Interface:
  1280. <4>[ 217.360215] [DISP] *** Parallel HV Panel
  1281. <4>[ 217.360223] [DISP] *** Lcd Frm to RGB666
  1282. <4>[ 217.360230] [DISP] ***
  1283. <4>[ 217.360235] [DISP] *** Timing:
  1284. <4>[ 217.360242] [DISP] *** lcd_x: 800
  1285. <4>[ 217.360249] [DISP] *** lcd_y: 480
  1286. <4>[ 217.360256] [DISP] *** lcd_ht: 928
  1287. <4>[ 217.360263] [DISP] *** lcd_hbp: 88
  1288. <4>[ 217.360270] [DISP] *** lcd_vt: 1050
  1289. <4>[ 217.360278] [DISP] *** lcd_vbp: 32
  1290. <4>[ 217.360285] [DISP] *** lcd_hspw: 30
  1291. <4>[ 217.360292] [DISP] *** lcd_vspw: 13
  1292. <4>[ 217.360299] [DISP] *** lcd_frame_frq: 80Hz
  1293. <4>[ 217.360307] [DISP] ***
  1294. <4>[ 217.360312] [DISP] *** WRN03: Recommend "lcd_dclk_frq = 29"
  1295. <4>[ 217.360321] [DISP] ***
  1296. <4>[ 217.360327] [DISP] *** LCD Panel Parameter Check End
  1297. <4>[ 217.360335] [DISP] *****************************************************************
  1298. <6>[ 217.360356] display late resume done: backlight_late_resume
  1299. <4>[ 217.360375] [AXP]======late resume=======
  1300. <4>[ 217.362292] [AXP-APP]pmu_resume_chgcur = 300000
  1301. <4>[ 217.362344] [GSL1680] Enter gsl_ts_late_resume
  1302. <4>[ 217.640974] [i2c1] incomplete xfer (0x48)
  1303. <4>[ 227.035158] [pm]valid
  1304. <6>[ 227.035206] request_suspend_state: sleep (0->3) at 227035194400 (2013-08-09 15:41:56.604150835 UTC)
  1305. <4>[ 227.061829] [GSL1680] Enter gsl_ts_early_suspend
  1306. <4>[ 227.161891] [AXP]======early suspend=======
  1307. <4>[ 227.162704] [AXP-APP]pmu_earlysuspend_chgcur = 600000
  1308. <4>[ 227.162713] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol = 3500000
  1309. <4>[ 227.162723] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol val = 0x71
  1310. <6>[ 227.163671] ==display early suspend enter
  1311. <4>[ 229.390826] [AXP]power key down
  1312. <6>[ 229.392981] request_suspend_state: wakeup (3->0) at 229392950701 (2013-08-09 15:41:58.961907970 UTC)
  1313. <6>[ 229.393803] ==display late resume enter
  1314. <4>[ 229.395143] [AXP]axp_battery_event, 743, event = 0x20
  1315. <4>[ 229.577637] [AXP]power key up
  1316. <4>[ 229.578376] [AXP]axp_battery_event, 743, event = 0x40
  1317. <4>[ 229.960083] [DISP] *****************************************************************
  1318. <4>[ 229.960115] [DISP] ***
  1319. <4>[ 229.960121] [DISP] *** LCD Panel Parameter Check
  1320. <4>[ 229.960129] [DISP] ***
  1321. <4>[ 229.960134] [DISP] *** by dulianping
  1322. <4>[ 229.960142] [DISP] ***
  1323. <4>[ 229.960147] [DISP] *****************************************************************
  1324. <4>[ 229.960157] [DISP] ***
  1325. <4>[ 229.960164] [DISP] *** Interface:
  1326. <4>[ 229.960171] [DISP] *** Parallel HV Panel
  1327. <4>[ 229.960179] [DISP] *** Lcd Frm to RGB666
  1328. <4>[ 229.960185] [DISP] ***
  1329. <4>[ 229.960191] [DISP] *** Timing:
  1330. <4>[ 229.960197] [DISP] *** lcd_x: 800
  1331. <4>[ 229.960205] [DISP] *** lcd_y: 480
  1332. <4>[ 229.960212] [DISP] *** lcd_ht: 928
  1333. <4>[ 229.960219] [DISP] *** lcd_hbp: 88
  1334. <4>[ 229.960226] [DISP] *** lcd_vt: 1050
  1335. <4>[ 229.960235] [DISP] *** lcd_vbp: 32
  1336. <4>[ 229.960242] [DISP] *** lcd_hspw: 30
  1337. <4>[ 229.960249] [DISP] *** lcd_vspw: 13
  1338. <4>[ 229.960256] [DISP] *** lcd_frame_frq: 80Hz
  1339. <4>[ 229.960264] [DISP] ***
  1340. <4>[ 229.960270] [DISP] *** WRN03: Recommend "lcd_dclk_frq = 29"
  1341. <4>[ 229.960279] [DISP] ***
  1342. <4>[ 229.960286] [DISP] *** LCD Panel Parameter Check End
  1343. <4>[ 229.960296] [DISP] *****************************************************************
  1344. <6>[ 229.960317] display late resume done: backlight_late_resume
  1345. <4>[ 229.960336] [AXP]======late resume=======
  1346. <4>[ 229.961191] [AXP-APP]pmu_resume_chgcur = 300000
  1347. <4>[ 229.961204] [GSL1680] Enter gsl_ts_late_resume
  1348. <4>[ 230.231538] [i2c1] incomplete xfer (0x48)
  1349. <4>[ 239.626642] [pm]valid
  1350. <6>[ 239.626686] request_suspend_state: sleep (0->3) at 239626674252 (2013-08-09 15:42:09.195631062 UTC)
  1351. <4>[ 239.654291] [GSL1680] Enter gsl_ts_early_suspend
  1352. <4>[ 239.758789] [AXP]======early suspend=======
  1353. <4>[ 239.765158] [AXP-APP]pmu_earlysuspend_chgcur = 600000
  1354. <4>[ 239.765175] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol = 3500000
  1355. <4>[ 239.765184] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol val = 0x71
  1356. <6>[ 239.766778] ==display early suspend enter
  1357. <4>[ 260.034378] [AXP]power key down
  1358. <6>[ 260.035752] request_suspend_state: wakeup (3->0) at 260035726258 (2013-08-09 15:42:29.604682860 UTC)
  1359. <6>[ 260.036617] ==display late resume enter
  1360. <4>[ 260.039777] [AXP]axp_battery_event, 743, event = 0x20
  1361. <4>[ 260.197269] [AXP]power key up
  1362. <4>[ 260.198255] [AXP]axp_battery_event, 743, event = 0x40
  1363. <4>[ 260.611661] [DISP] *****************************************************************
  1364. <4>[ 260.611690] [DISP] ***
  1365. <4>[ 260.611696] [DISP] *** LCD Panel Parameter Check
  1366. <4>[ 260.611704] [DISP] ***
  1367. <4>[ 260.611710] [DISP] *** by dulianping
  1368. <4>[ 260.611717] [DISP] ***
  1369. <4>[ 260.611722] [DISP] *****************************************************************
  1370. <4>[ 260.611732] [DISP] ***
  1371. <4>[ 260.611737] [DISP] *** Interface:
  1372. <4>[ 260.611744] [DISP] *** Parallel HV Panel
  1373. <4>[ 260.611752] [DISP] *** Lcd Frm to RGB666
  1374. <4>[ 260.611759] [DISP] ***
  1375. <4>[ 260.611765] [DISP] *** Timing:
  1376. <4>[ 260.611771] [DISP] *** lcd_x: 800
  1377. <4>[ 260.611778] [DISP] *** lcd_y: 480
  1378. <4>[ 260.611786] [DISP] *** lcd_ht: 928
  1379. <4>[ 260.611793] [DISP] *** lcd_hbp: 88
  1380. <4>[ 260.611800] [DISP] *** lcd_vt: 1050
  1381. <4>[ 260.611807] [DISP] *** lcd_vbp: 32
  1382. <4>[ 260.611814] [DISP] *** lcd_hspw: 30
  1383. <4>[ 260.611821] [DISP] *** lcd_vspw: 13
  1384. <4>[ 260.611828] [DISP] *** lcd_frame_frq: 80Hz
  1385. <4>[ 260.611836] [DISP] ***
  1386. <4>[ 260.611842] [DISP] *** WRN03: Recommend "lcd_dclk_frq = 29"
  1387. <4>[ 260.611851] [DISP] ***
  1388. <4>[ 260.611859] [DISP] *** LCD Panel Parameter Check End
  1389. <4>[ 260.611867] [DISP] *****************************************************************
  1390. <6>[ 260.611887] display late resume done: backlight_late_resume
  1391. <4>[ 260.611919] [AXP]======late resume=======
  1392. <4>[ 260.613548] [AXP-APP]pmu_resume_chgcur = 300000
  1393. <4>[ 260.613564] [GSL1680] Enter gsl_ts_late_resume
  1394. <4>[ 260.992177] [i2c1] incomplete xfer (0x48)
  1395. <4>[ 270.270524] [pm]valid
  1396. <6>[ 270.270572] request_suspend_state: sleep (0->3) at 270270560489 (2013-08-09 15:42:39.839517007 UTC)
  1397. <4>[ 270.274559] [GSL1680] Enter gsl_ts_early_suspend
  1398. <4>[ 270.459878] [AXP]======early suspend=======
  1399. <4>[ 270.460860] [AXP-APP]pmu_earlysuspend_chgcur = 600000
  1400. <4>[ 270.460872] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol = 3500000
  1401. <4>[ 270.461582] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol val = 0x71
  1402. <6>[ 270.464135] ==display early suspend enter
  1403. <4>[ 360.963086] [AXP]Correct5:fix 99:charger->rest_vol = 100
  1404. <4>[ 370.983349] battery vol change: 99->98
  1405. <4>[ 491.223386] battery vol change: 98->99
  1406. <4>[ 651.543371] [AXP]Correct5:fix 99:charger->rest_vol = 100
  1407. <4>[ 745.720947] [AXP]power key down
  1408. <6>[ 745.722284] request_suspend_state: wakeup (3->0) at 745722260315 (2013-08-09 15:50:35.291215250 UTC)
  1409. <6>[ 745.723259] ==display late resume enter
  1410. <4>[ 745.726511] [AXP]axp_battery_event, 743, event = 0x20
  1411. <4>[ 745.939406] [AXP]power key up
  1412. <4>[ 745.940482] [AXP]axp_battery_event, 743, event = 0x40
  1413. <4>[ 746.290084] [DISP] *****************************************************************
  1414. <4>[ 746.290113] [DISP] ***
  1415. <4>[ 746.290119] [DISP] *** LCD Panel Parameter Check
  1416. <4>[ 746.290127] [DISP] ***
  1417. <4>[ 746.290135] [DISP] *** by dulianping
  1418. <4>[ 746.290142] [DISP] ***
  1419. <4>[ 746.290148] [DISP] *****************************************************************
  1420. <4>[ 746.290157] [DISP] ***
  1421. <4>[ 746.290163] [DISP] *** Interface:
  1422. <4>[ 746.290170] [DISP] *** Parallel HV Panel
  1423. <4>[ 746.290177] [DISP] *** Lcd Frm to RGB666
  1424. <4>[ 746.290184] [DISP] ***
  1425. <4>[ 746.290190] [DISP] *** Timing:
  1426. <4>[ 746.290196] [DISP] *** lcd_x: 800
  1427. <4>[ 746.290206] [DISP] *** lcd_y: 480
  1428. <4>[ 746.290214] [DISP] *** lcd_ht: 928
  1429. <4>[ 746.290221] [DISP] *** lcd_hbp: 88
  1430. <4>[ 746.290228] [DISP] *** lcd_vt: 1050
  1431. <4>[ 746.290235] [DISP] *** lcd_vbp: 32
  1432. <4>[ 746.290242] [DISP] *** lcd_hspw: 30
  1433. <4>[ 746.290249] [DISP] *** lcd_vspw: 13
  1434. <4>[ 746.290256] [DISP] *** lcd_frame_frq: 80Hz
  1435. <4>[ 746.290264] [DISP] ***
  1436. <4>[ 746.290270] [DISP] *** WRN03: Recommend "lcd_dclk_frq = 29"
  1437. <4>[ 746.290279] [DISP] ***
  1438. <4>[ 746.290285] [DISP] *** LCD Panel Parameter Check End
  1439. <4>[ 746.290292] [DISP] *****************************************************************
  1440. <6>[ 746.290312] display late resume done: backlight_late_resume
  1441. <4>[ 746.290329] [AXP]======late resume=======
  1442. <4>[ 746.291273] [AXP-APP]pmu_resume_chgcur = 300000
  1443. <4>[ 746.291287] [GSL1680] Enter gsl_ts_late_resume
  1444. <4>[ 746.551392] [i2c1] incomplete xfer (0x48)
  1445. <4>[ 755.954820] [pm]valid
  1446. <6>[ 755.954862] request_suspend_state: sleep (0->3) at 755954850938 (2013-08-09 15:50:45.523807790 UTC)
  1447. <4>[ 755.990148] [GSL1680] Enter gsl_ts_early_suspend
  1448. <4>[ 756.079544] [AXP]======early suspend=======
  1449. <4>[ 756.086734] [AXP-APP]pmu_earlysuspend_chgcur = 600000
  1450. <4>[ 756.086752] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol = 3500000
  1451. <4>[ 756.086762] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol val = 0x71
  1452. <6>[ 756.087920] ==display early suspend enter
  1453. <4>[ 758.230988] [AXP]power key down
  1454. <6>[ 758.232496] request_suspend_state: wakeup (3->0) at 758232470559 (2013-08-09 15:50:47.801428077 UTC)
  1455. <4>[ 758.236252] [AXP]axp_battery_event, 743, event = 0x20
  1456. <6>[ 758.242294] ==display late resume enter
  1457. <4>[ 758.435711] [AXP]power key up
  1458. <4>[ 758.436435] [AXP]axp_battery_event, 743, event = 0x40
  1459. <4>[ 758.810098] [DISP] *****************************************************************
  1460. <4>[ 758.810128] [DISP] ***
  1461. <4>[ 758.810135] [DISP] *** LCD Panel Parameter Check
  1462. <4>[ 758.810142] [DISP] ***
  1463. <4>[ 758.810148] [DISP] *** by dulianping
  1464. <4>[ 758.810155] [DISP] ***
  1465. <4>[ 758.810161] [DISP] *****************************************************************
  1466. <4>[ 758.810170] [DISP] ***
  1467. <4>[ 758.810176] [DISP] *** Interface:
  1468. <4>[ 758.810182] [DISP] *** Parallel HV Panel
  1469. <4>[ 758.810190] [DISP] *** Lcd Frm to RGB666
  1470. <4>[ 758.810197] [DISP] ***
  1471. <4>[ 758.810203] [DISP] *** Timing:
  1472. <4>[ 758.810209] [DISP] *** lcd_x: 800
  1473. <4>[ 758.810217] [DISP] *** lcd_y: 480
  1474. <4>[ 758.810224] [DISP] *** lcd_ht: 928
  1475. <4>[ 758.810231] [DISP] *** lcd_hbp: 88
  1476. <4>[ 758.810238] [DISP] *** lcd_vt: 1050
  1477. <4>[ 758.810245] [DISP] *** lcd_vbp: 32
  1478. <4>[ 758.810252] [DISP] *** lcd_hspw: 30
  1479. <4>[ 758.810260] [DISP] *** lcd_vspw: 13
  1480. <4>[ 758.810267] [DISP] *** lcd_frame_frq: 80Hz
  1481. <4>[ 758.810274] [DISP] ***
  1482. <4>[ 758.810280] [DISP] *** WRN03: Recommend "lcd_dclk_frq = 29"
  1483. <4>[ 758.810289] [DISP] ***
  1484. <4>[ 758.810295] [DISP] *** LCD Panel Parameter Check End
  1485. <4>[ 758.810302] [DISP] *****************************************************************
  1486. <6>[ 758.810322] display late resume done: backlight_late_resume
  1487. <4>[ 758.810341] [AXP]======late resume=======
  1488. <4>[ 758.811216] [AXP-APP]pmu_resume_chgcur = 300000
  1489. <4>[ 758.811229] [GSL1680] Enter gsl_ts_late_resume
  1490. <4>[ 759.081031] [i2c1] incomplete xfer (0x48)
  1491. <4>[ 771.397623] [AXP]power key down
  1492. <4>[ 771.399591] [AXP]axp_battery_event, 743, event = 0x20
  1493. <4>[ 771.620337] [AXP]power key up
  1494. <4>[ 771.622220] [AXP]axp_battery_event, 743, event = 0x40
  1495. <4>[ 771.846261] [pm]valid
  1496. <6>[ 771.846295] request_suspend_state: sleep (0->3) at 771846284407 (2013-08-09 15:51:01.415241134 UTC)
  1497. <4>[ 771.872627] [GSL1680] Enter gsl_ts_early_suspend
  1498. <4>[ 772.001660] [AXP]======early suspend=======
  1499. <4>[ 772.010590] [AXP-APP]pmu_earlysuspend_chgcur = 600000
  1500. <4>[ 772.010606] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol = 3500000
  1501. <4>[ 772.010616] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol val = 0x71
  1502. <6>[ 772.011607] ==display early suspend enter
  1503. <4>[ 772.236445] [AXP]power key down
  1504. <4>[ 772.238892] [AXP]axp_battery_event, 743, event = 0x20
  1505. <6>[ 772.239371] request_suspend_state: wakeup (3->0) at 772239354151 (2013-08-09 15:51:01.808311420 UTC)
  1506. <4>[ 772.476770] [AXP]power key up
  1507. <4>[ 772.477491] [AXP]axp_battery_event, 743, event = 0x40
  1508. <6>[ 773.041998] ==display late resume enter
  1509. <4>[ 773.600131] [DISP] *****************************************************************
  1510. <4>[ 773.600164] [DISP] ***
  1511. <4>[ 773.600170] [DISP] *** LCD Panel Parameter Check
  1512. <4>[ 773.600178] [DISP] ***
  1513. <4>[ 773.600184] [DISP] *** by dulianping
  1514. <4>[ 773.600191] [DISP] ***
  1515. <4>[ 773.600197] [DISP] *****************************************************************
  1516. <4>[ 773.600206] [DISP] ***
  1517. <4>[ 773.600211] [DISP] *** Interface:
  1518. <4>[ 773.600218] [DISP] *** Parallel HV Panel
  1519. <4>[ 773.600226] [DISP] *** Lcd Frm to RGB666
  1520. <4>[ 773.600233] [DISP] ***
  1521. <4>[ 773.600239] [DISP] *** Timing:
  1522. <4>[ 773.600245] [DISP] *** lcd_x: 800
  1523. <4>[ 773.600252] [DISP] *** lcd_y: 480
  1524. <4>[ 773.600260] [DISP] *** lcd_ht: 928
  1525. <4>[ 773.600267] [DISP] *** lcd_hbp: 88
  1526. <4>[ 773.600274] [DISP] *** lcd_vt: 1050
  1527. <4>[ 773.600281] [DISP] *** lcd_vbp: 32
  1528. <4>[ 773.600289] [DISP] *** lcd_hspw: 30
  1529. <4>[ 773.600296] [DISP] *** lcd_vspw: 13
  1530. <4>[ 773.600303] [DISP] *** lcd_frame_frq: 80Hz
  1531. <4>[ 773.600310] [DISP] ***
  1532. <4>[ 773.600316] [DISP] *** WRN03: Recommend "lcd_dclk_frq = 29"
  1533. <4>[ 773.600325] [DISP] ***
  1534. <4>[ 773.600331] [DISP] *** LCD Panel Parameter Check End
  1535. <4>[ 773.600339] [DISP] *****************************************************************
  1536. <6>[ 773.600362] display late resume done: backlight_late_resume
  1537. <4>[ 773.600384] [AXP]======late resume=======
  1538. <4>[ 773.601275] [AXP-APP]pmu_resume_chgcur = 300000
  1539. <4>[ 773.601289] [GSL1680] Enter gsl_ts_late_resume
  1540. <4>[ 773.881012] [i2c1] incomplete xfer (0x48)
  1541. <4>[ 774.074280] [AXP]power key down
  1542. <4>[ 774.076670] [AXP]axp_battery_event, 743, event = 0x20
  1543. <4>[ 775.495594] [AXP]power key up
  1544. <4>[ 775.496627] [AXP]axp_battery_event, 743, event = 0x40
  1545. <4>[ 784.959650] [pm]valid
  1546. <6>[ 784.959695] request_suspend_state: sleep (0->3) at 784959683173 (2013-08-09 15:51:14.528640191 UTC)
  1547. <4>[ 784.990186] [GSL1680] Enter gsl_ts_early_suspend
  1548. <4>[ 785.086448] [AXP]======early suspend=======
  1549. <4>[ 785.087986] [AXP-APP]pmu_earlysuspend_chgcur = 600000
  1550. <4>[ 785.087999] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol = 3500000
  1551. <4>[ 785.088009] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol val = 0x71
  1552. <6>[ 785.088946] ==display early suspend enter
  1553. <4>[ 821.883270] [AXP]Correct5:fix 99:charger->rest_vol = 100
  1554. <4>[ 992.223258] [AXP]Correct5:fix 99:charger->rest_vol = 100
  1555. <4>[ 1172.583275] [AXP]Correct5:fix 99:charger->rest_vol = 100
  1556. <4>[ 1372.983273] [AXP]Correct5:fix 99:charger->rest_vol = 100
  1557. <4>[ 1593.423260] [AXP]Correct5:fix 99:charger->rest_vol = 100
  1558. <4>[ 1843.923260] [AXP]Correct5:fix 99:charger->rest_vol = 100
  1559. <4>[ 2114.463256] [AXP]Correct5:fix 99:charger->rest_vol = 100
  1560. <4>[ 2270.455697] [AXP]power key down
  1561. <4>[ 2270.460128] [AXP]axp_battery_event, 743, event = 0x20
  1562. <6>[ 2270.467234] request_suspend_state: wakeup (3->0) at 2270467208008 (2013-08-09 16:16:00.036164902 UTC)
  1563. <6>[ 2270.467297] ==display late resume enter
  1564. <4>[ 2270.679366] [AXP]power key up
  1565. <4>[ 2270.680501] [AXP]axp_battery_event, 743, event = 0x40
  1566. <4>[ 2271.020069] [DISP] *****************************************************************
  1567. <4>[ 2271.020097] [DISP] ***
  1568. <4>[ 2271.020103] [DISP] *** LCD Panel Parameter Check
  1569. <4>[ 2271.020111] [DISP] ***
  1570. <4>[ 2271.020116] [DISP] *** by dulianping
  1571. <4>[ 2271.020123] [DISP] ***
  1572. <4>[ 2271.020129] [DISP] *****************************************************************
  1573. <4>[ 2271.020138] [DISP] ***
  1574. <4>[ 2271.020144] [DISP] *** Interface:
  1575. <4>[ 2271.020151] [DISP] *** Parallel HV Panel
  1576. <4>[ 2271.020158] [DISP] *** Lcd Frm to RGB666
  1577. <4>[ 2271.020165] [DISP] ***
  1578. <4>[ 2271.020171] [DISP] *** Timing:
  1579. <4>[ 2271.020177] [DISP] *** lcd_x: 800
  1580. <4>[ 2271.020184] [DISP] *** lcd_y: 480
  1581. <4>[ 2271.020192] [DISP] *** lcd_ht: 928
  1582. <4>[ 2271.020198] [DISP] *** lcd_hbp: 88
  1583. <4>[ 2271.020209] [DISP] *** lcd_vt: 1050
  1584. <4>[ 2271.020216] [DISP] *** lcd_vbp: 32
  1585. <4>[ 2271.020223] [DISP] *** lcd_hspw: 30
  1586. <4>[ 2271.020230] [DISP] *** lcd_vspw: 13
  1587. <4>[ 2271.020237] [DISP] *** lcd_frame_frq: 80Hz
  1588. <4>[ 2271.020244] [DISP] ***
  1589. <4>[ 2271.020250] [DISP] *** WRN03: Recommend "lcd_dclk_frq = 29"
  1590. <4>[ 2271.020259] [DISP] ***
  1591. <4>[ 2271.020264] [DISP] *** LCD Panel Parameter Check End
  1592. <4>[ 2271.020272] [DISP] *****************************************************************
  1593. <6>[ 2271.020292] display late resume done: backlight_late_resume
  1594. <4>[ 2271.020311] [AXP]======late resume=======
  1595. <4>[ 2271.021192] [AXP-APP]pmu_resume_chgcur = 300000
  1596. <4>[ 2271.021206] [GSL1680] Enter gsl_ts_late_resume
  1597. <4>[ 2271.300932] [i2c1] incomplete xfer (0x48)
  1598. <4>[ 2274.312168] [AXP]power key down
  1599. <4>[ 2274.313794] [AXP]axp_battery_event, 743, event = 0x20
  1600. <4>[ 2274.881637] [AXP]power key up
  1601. <4>[ 2274.882397] [AXP]axp_battery_event, 743, event = 0x40
  1602. <4>[ 2275.767460] [AXP]power key down
  1603. <4>[ 2275.769686] [AXP]axp_battery_event, 743, event = 0x20
  1604. <4>[ 2275.990084] [AXP]power key up
  1605. <4>[ 2275.991885] [AXP]axp_battery_event, 743, event = 0x40
  1606. <4>[ 2276.222270] [pm]valid
  1607. <6>[ 2276.222355] request_suspend_state: sleep (0->3) at 2276222333706 (2013-08-09 16:16:05.791287891 UTC)
  1608. <4>[ 2276.225682] [GSL1680] Enter gsl_ts_early_suspend
  1609. <4>[ 2276.348295] [AXP]======early suspend=======
  1610. <4>[ 2276.353516] [AXP-APP]pmu_earlysuspend_chgcur = 600000
  1611. <4>[ 2276.353533] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol = 3500000
  1612. <4>[ 2276.353542] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol val = 0x71
  1613. <6>[ 2276.357096] ==display early suspend enter
  1614. <4>[ 2276.550349] [AXP]power key down
  1615. <4>[ 2276.552629] [AXP]axp_battery_event, 743, event = 0x20
  1616. <6>[ 2276.553092] request_suspend_state: wakeup (3->0) at 2276553077047 (2013-08-09 16:16:06.122034232 UTC)
  1617. <4>[ 2276.770722] [AXP]power key up
  1618. <4>[ 2276.771412] [AXP]axp_battery_event, 743, event = 0x40
  1619. <6>[ 2277.385111] ==display late resume enter
  1620. <4>[ 2277.940087] [DISP] *****************************************************************
  1621. <4>[ 2277.940117] [DISP] ***
  1622. <4>[ 2277.940123] [DISP] *** LCD Panel Parameter Check
  1623. <4>[ 2277.940131] [DISP] ***
  1624. <4>[ 2277.940139] [DISP] *** by dulianping
  1625. <4>[ 2277.940146] [DISP] ***
  1626. <4>[ 2277.940152] [DISP] *****************************************************************
  1627. <4>[ 2277.940161] [DISP] ***
  1628. <4>[ 2277.940167] [DISP] *** Interface:
  1629. <4>[ 2277.940174] [DISP] *** Parallel HV Panel
  1630. <4>[ 2277.940182] [DISP] *** Lcd Frm to RGB666
  1631. <4>[ 2277.940188] [DISP] ***
  1632. <4>[ 2277.940194] [DISP] *** Timing:
  1633. <4>[ 2277.940201] [DISP] *** lcd_x: 800
  1634. <4>[ 2277.940211] [DISP] *** lcd_y: 480
  1635. <4>[ 2277.940218] [DISP] *** lcd_ht: 928
  1636. <4>[ 2277.940225] [DISP] *** lcd_hbp: 88
  1637. <4>[ 2277.940232] [DISP] *** lcd_vt: 1050
  1638. <4>[ 2277.940239] [DISP] *** lcd_vbp: 32
  1639. <4>[ 2277.940247] [DISP] *** lcd_hspw: 30
  1640. <4>[ 2277.940254] [DISP] *** lcd_vspw: 13
  1641. <4>[ 2277.940261] [DISP] *** lcd_frame_frq: 80Hz
  1642. <4>[ 2277.940268] [DISP] ***
  1643. <4>[ 2277.940278] [DISP] *** WRN03: Recommend "lcd_dclk_frq = 29"
  1644. <4>[ 2277.940286] [DISP] ***
  1645. <4>[ 2277.940292] [DISP] *** LCD Panel Parameter Check End
  1646. <4>[ 2277.940300] [DISP] *****************************************************************
  1647. <6>[ 2277.940320] display late resume done: backlight_late_resume
  1648. <4>[ 2277.940338] [AXP]======late resume=======
  1649. <4>[ 2277.941231] [AXP-APP]pmu_resume_chgcur = 300000
  1650. <4>[ 2277.941243] [GSL1680] Enter gsl_ts_late_resume
  1651. <4>[ 2278.211013] [i2c1] incomplete xfer (0x48)
  1652. <4>[ 2279.171369] [sw_udc]: IRQ: suspend
  1653. <4>[ 2279.187039] [AXP]battery state change
  1654. <4>[ 2279.188759] charger->usb_valid = 0
  1655. <4>[ 2279.188769] set usb vol-lim to 4000 mV, cur-lim to 0 mA
  1656. <4>[ 2279.193950] [AXP]axp_battery_event, 743, event = 0x4
  1657. <4>[ 2279.710068]
  1658. <4>[ 2279.710084]
  1659. <4>[ 2279.710087] rmmod_device_driver
  1660. <4>[ 2279.710091]
  1661. <4>[ 2279.710102] [sw_udc]: sw_usb_device_disable start
  1662. <4>[ 2279.710135] [sw_udc]: ep disable: ep3(0xc08e24e8, ep3-bulk, 128, 200)
  1663. <4>[ 2279.710157] [sw_udc]: ep disable: ep4(0xc08e2528, ep4-bulk, 0, 200)
  1664. <4>[ 2279.710204] [sw_udc]: close_usb_clock
  1665. <4>[ 2279.710251] [sw_udc]: sw_usb_device_disable end
  1666. <4>[ 2279.710281] [sw_udc]: dequeue: ep(0xc08e2490, 2), _req(0xd257d1c8, 512, 0)
  1667. <4>[ 2279.710304] [sw_udc]: free request: ep(0xc08e2468, ep1-bulk, 512), req(0xd257d140)
  1668. <4>[ 2279.710317] [sw_udc]: free request: ep(0xc08e24a8, ep2-bulk, 512), req(0xd257d1c0)
  1669. <4>[ 2279.710329] [sw_udc]: free request: ep(0xc08e2468, ep1-bulk, 512), req(0xd257d240)
  1670. <4>[ 2279.710341] [sw_udc]: free request: ep(0xc08e24a8, ep2-bulk, 512), req(0xd257d180)
  1671. <4>[ 2279.710353] [sw_udc]: ep disable: ep1(0xc08e2468, ep1-bulk, 128, 200)
  1672. <4>[ 2279.710366] WRN:L2201(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
  1673. <4>[ 2279.710375] [sw_udc]: ep disable: ep2(0xc08e24a8, ep2-bulk, 0, 200)
  1674. <4>[ 2279.710387] WRN:L2201(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
  1675. <6>[ 2279.710510] adb_release
  1676. <6>[ 2279.710980] adb_open
  1677. <6>[ 2279.712368] android_work: sent uevent USB_STATE=DISCONNECTED
  1678. <4>[ 2296.286439] [AXP]battery state change
  1679. <4>[ 2296.288196] charger->usb_valid = 1
  1680. <4>[ 2296.290449] [AXP]axp_battery_event, 743, event = 0x8
  1681. <4>[ 2296.709071] [AXP]battery state change
  1682. <4>[ 2296.710821] charger->usb_valid = 1
  1683. <4>[ 2296.713164] [AXP]axp_battery_event, 743, event = 0x400
  1684. <4>[ 2298.900066]
  1685. <4>[ 2298.900082]
  1686. <4>[ 2298.900085] insmod_device_driver
  1687. <4>[ 2298.900089]
  1688. <4>[ 2298.900100] [sw_udc]: sw_usb_device_enable start
  1689. <4>[ 2298.900109] [sw_udc]: usb_vbase = 0xf1c13000
  1690. <4>[ 2298.900119] [sw_udc]: sram_vbase = 0xf1c00000
  1691. <4>[ 2298.900145] [sw_udc]: open_usb_clock
  1692. <4>[ 2298.920708] [sw_udc]: usbd_stop_work
  1693. <4>[ 2298.920759] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED
  1694. <4>[ 2298.920770] [sw_udc]: usbd_start_work
  1695. <4>[ 2298.920777] [sw_udc]: usbd_start_work
  1696. <4>[ 2298.920784] [sw_udc]: sw_usb_device_enable end
  1697. <4>[ 2298.976225] [sw_udc]: IRQ: suspend
  1698. <4>[ 2298.976246] [sw_udc]: ERR: usb speed is unkown
  1699. <4>[ 2299.085152] [sw_udc]: IRQ: reset
  1700. <4>[ 2299.085167] [sw_udc]: irq: reset happen, throw away all urb
  1701. <4>[ 2299.125609] [sw_udc]:
  1702. <4>[ 2299.125624] +++++++++++++++++++++++++++++++++++++
  1703. <4>[ 2299.125631] [sw_udc]: usb enter high speed.
  1704. <4>[ 2299.125638] [sw_udc]:
  1705. <4>[ 2299.125643] +++++++++++++++++++++++++++++++++++++
  1706. <6>[ 2299.125801] android_work: sent uevent USB_STATE=CONNECTED
  1707. <4>[ 2299.130525] [sw_udc]: IRQ: reset
  1708. <4>[ 2299.130551] [sw_udc]: irq: reset happen, throw away all urb
  1709. <4>[ 2299.165643] [sw_udc]: Set address 4
  1710. <6>[ 2299.213896] android_usb gadget: high speed config #1: android
  1711. <4>[ 2299.213938] [sw_udc]: ep enable: ep3(0xc08e24e8, ep3-bulk, 128, 512)
  1712. <4>[ 2299.213960] [sw_udc]: ep enable: ep4(0xc08e2528, ep4-bulk, 0, 512)
  1713. <4>[ 2299.214151] [sw_udc]: ep enable: ep1(0xc08e2468, ep1-bulk, 128, 512)
  1714. <4>[ 2299.214172] [sw_udc]: ep enable: ep2(0xc08e24a8, ep2-bulk, 0, 512)
  1715. <4>[ 2299.214187] [sw_udc]: alloc request: ep(0xc08e2468, ep1-bulk, 512), req(0xdea42400)
  1716. <4>[ 2299.214200] [sw_udc]: alloc request: ep(0xc08e24a8, ep2-bulk, 512), req(0xdea42ac0)
  1717. <4>[ 2299.214212] [sw_udc]: alloc request: ep(0xc08e2468, ep1-bulk, 512), req(0xdea42cc0)
  1718. <4>[ 2299.214224] [sw_udc]: alloc request: ep(0xc08e24a8, ep2-bulk, 512), req(0xdea42ec0)
  1719. <6>[ 2299.214364] android_work: sent uevent USB_STATE=CONFIGURED
  1720. <4>[ 2300.290059] set usbcur 0 mA
  1721. <4>[ 2300.290342] set usbvol 4000 mV
  1722. <4>[ 2334.902281] [AXP]-----------in change_flag-----------
  1723. <4>[ 2334.903283] [AXP]Correct2:fix 100,charger->rest_vol = 99 -> 100%
  1724. <4>[ 2334.903791] battery vol change: 99->100
  1725. <4>[ 2356.586429] [pm]valid
  1726. <6>[ 2356.586476] request_suspend_state: sleep (0->3) at 2356586463730 (2013-08-09 16:17:26.155420832 UTC)
  1727. <4>[ 2356.619323] [GSL1680] Enter gsl_ts_early_suspend
  1728. <4>[ 2356.720238] [AXP]======early suspend=======
  1729. <4>[ 2356.720983] [AXP-APP]pmu_earlysuspend_chgcur = 600000
  1730. <4>[ 2356.720994] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol = 3500000
  1731. <4>[ 2356.721003] [AXP-APP][earlysuspend]pmu_suspendpwroff_vol val = 0x71
  1732. <6>[ 2356.721979] ==display early suspend enter
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement